ASCEND-MIBDMTALNET-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-MIBDMTALNET-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mibdmtAlDslNetworkProfile 1.3.6.1.4.1.529.23.10
       mibdmtAlDslNetworkProfileTable 1.3.6.1.4.1.529.23.10.1 no-access
A list of mibdmtAlDslNetworkProfile profile entries.
           mibdmtAlDslNetworkProfileEntry 1.3.6.1.4.1.529.23.10.1.1 no-access
A mibdmtAlDslNetworkProfile entry containing objects that maps to the parameters of mibdmtAlDslNetworkProfile profile.
               dmtAlDslNetworkProfile_Shelf_o 1.3.6.1.4.1.529.23.10.1.1.1 integer read-only
               dmtAlDslNetworkProfile_Slot_o 1.3.6.1.4.1.529.23.10.1.1.2 integer read-only
               dmtAlDslNetworkProfile_Item_o 1.3.6.1.4.1.529.23.10.1.1.3 integer read-only
               dmtAlDslNetworkProfile_Name 1.3.6.1.4.1.529.23.10.1.1.4 displaystring read-write
For future use. The current design does not use the name field but instead references Cell Based Dmt Adsl lines by the physical address; we may in the future support referencing Cell Based Dmt Adsl lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Cell Based Dmt Adsl line physical address.
               dmtAlDslNetworkProfile_PhysicalAddress_Shelf 1.3.6.1.4.1.529.23.10.1.1.5 integer read-write
The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.
               dmtAlDslNetworkProfile_PhysicalAddress_Slot 1.3.6.1.4.1.529.23.10.1.1.6 integer read-write
The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.
               dmtAlDslNetworkProfile_PhysicalAddress_ItemNumber 1.3.6.1.4.1.529.23.10.1.1.7 integer read-write
A number that specifies an addressable entity within the context of shelf and slot.
               dmtAlDslNetworkProfile_Enabled 1.3.6.1.4.1.529.23.10.1.1.8 integer read-write
TRUE if the line is enabled, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
               dmtAlDslNetworkProfile_ProfileNumber 1.3.6.1.4.1.529.23.10.1.1.9 integer read-write
For potential backwards compatibility. The current design consists of one line profile numbered 0.
               dmtAlDslNetworkProfile_LineConfig_NailedGroup 1.3.6.1.4.1.529.23.10.1.1.11 integer read-write
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
               dmtAlDslNetworkProfile_LineConfig_RateAdaptModeUp 1.3.6.1.4.1.529.23.10.1.1.19 integer read-write
The up stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. Enumeration: 'operator': 1, 'dynamic': 3, 'automaticAtStartup': 2.
               dmtAlDslNetworkProfile_LineConfig_RateAdaptModeDown 1.3.6.1.4.1.529.23.10.1.1.20 integer read-write
The down stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. Enumeration: 'operator': 1, 'dynamic': 3, 'automaticAtStartup': 2.
               dmtAlDslNetworkProfile_LineConfig_RateAdaptRatioUp 1.3.6.1.4.1.529.23.10.1.1.21 integer read-write
The ratio in percent of excess bitrate distribution over the up stream fast and interleaved latencies. 100% - fast path , 0% - interleaved path. Valid ONLY in rate-adapt-mode = AUTOMATIC_AT_STARTUP or DYNAMIC .
               dmtAlDslNetworkProfile_LineConfig_RateAdaptRatioDown 1.3.6.1.4.1.529.23.10.1.1.22 integer read-write
The ratio in percent of excess bitrate distribution over the down stream fast and interleaved latencies. 100% - fast path , 0% - interleaved path. Valid ONLY in rate-adapt-mode = AUTOMATIC_AT_STARTUP or DYNAMIC .
               dmtAlDslNetworkProfile_LineConfig_MaxPowerSpectralDensity 1.3.6.1.4.1.529.23.10.1.1.25 integer read-write
The power spectral density in dBm/Hz allowed on the line. Decreasing the value may reduce capacity. Defined for downstream only. Actual value is negative.
               dmtAlDslNetworkProfile_FastPathConfig_MinBitrateUp 1.3.6.1.4.1.529.23.10.1.1.26 integer read-write
The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_FastPathConfig_MinBitrateDown 1.3.6.1.4.1.529.23.10.1.1.27 integer read-write
The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_FastPathConfig_MaxBitrateUp 1.3.6.1.4.1.529.23.10.1.1.28 integer read-write
The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_FastPathConfig_MaxBitrateDown 1.3.6.1.4.1.529.23.10.1.1.29 integer read-write
The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_FastPathConfig_PlannedBitrateUp 1.3.6.1.4.1.529.23.10.1.1.30 integer read-write
The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_FastPathConfig_PlannedBitrateDown 1.3.6.1.4.1.529.23.10.1.1.31 integer read-write
The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_MinBitrateUp 1.3.6.1.4.1.529.23.10.1.1.32 integer read-write
The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_MinBitrateDown 1.3.6.1.4.1.529.23.10.1.1.33 integer read-write
The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_MaxBitrateUp 1.3.6.1.4.1.529.23.10.1.1.34 integer read-write
The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_MaxBitrateDown 1.3.6.1.4.1.529.23.10.1.1.35 integer read-write
The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_PlannedBitrateUp 1.3.6.1.4.1.529.23.10.1.1.36 integer read-write
The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_PlannedBitrateDown 1.3.6.1.4.1.529.23.10.1.1.37 integer read-write
The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED.
               dmtAlDslNetworkProfile_InterleavePathConfig_MaxDelayUp 1.3.6.1.4.1.529.23.10.1.1.38 integer read-write
The maximum allowed up stream interleaver induced delay, in msec.
               dmtAlDslNetworkProfile_InterleavePathConfig_MaxDelayDown 1.3.6.1.4.1.529.23.10.1.1.39 integer read-write
The maximum allowed down stream interleaver induced delay, in msec.
               dmtAlDslNetworkProfile_MarginConfig_TargetNoiseMarginUp 1.3.6.1.4.1.529.23.10.1.1.40 integer read-write
The up stream noise margin in dB that the modem shall achieve relative to BER 10^-7.
               dmtAlDslNetworkProfile_MarginConfig_TargetNoiseMarginDown 1.3.6.1.4.1.529.23.10.1.1.41 integer read-write
The down stream noise margin in dB that the modem shall achieve relative to BER 10^-7.
               dmtAlDslNetworkProfile_MarginConfig_MinNoiseMarginUp 1.3.6.1.4.1.529.23.10.1.1.42 integer read-write
The up stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls below this level the ATU shall attempt to increase far-end output power to get margin above this limit, by means of bit swapping.
               dmtAlDslNetworkProfile_MarginConfig_MinNoiseMarginDown 1.3.6.1.4.1.529.23.10.1.1.43 integer read-write
The down stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls below this level the ATU shall attempt to increase far-end output power to get margin above this limit, by means of bit swapping.
               dmtAlDslNetworkProfile_MarginConfig_MaxAddNoiseMarginUp 1.3.6.1.4.1.529.23.10.1.1.44 integer read-write
The up stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-7. If current noise margin is above this level the ATU shall attempt to reduce far-end output power to get margin below this limit, by means of bit swapping.
               dmtAlDslNetworkProfile_MarginConfig_MaxAddNoiseMarginDown 1.3.6.1.4.1.529.23.10.1.1.45 integer read-write
The down stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-7. If current noise margin is above this level the ATU shall attempt to reduce far-end output power to get margin below this limit, by means of bit swapping.
               dmtAlDslNetworkProfile_MarginConfig_RaDownshiftMarginUp 1.3.6.1.4.1.529.23.10.1.1.46 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is below this parameter for more than ra-downshift-int-up sec, modem shall attemp to rate adapt (bitrate down).
               dmtAlDslNetworkProfile_MarginConfig_RaDownshiftIntUp 1.3.6.1.4.1.529.23.10.1.1.47 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is below ra-downshift-margin-up for more than this, modem shall attemp to rate adapt (bitrate down).
               dmtAlDslNetworkProfile_MarginConfig_RaDownshiftMarginDown 1.3.6.1.4.1.529.23.10.1.1.48 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is below this parameter for more than ra-downshift-int-down sec, modem shall attemp to rate adapt (bitrate down).
               dmtAlDslNetworkProfile_MarginConfig_RaDownshiftIntDown 1.3.6.1.4.1.529.23.10.1.1.49 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is below ra-downshift-margin-down for more than this, modem shall attemp to rate adapt (bitrate down).
               dmtAlDslNetworkProfile_MarginConfig_RaUpshiftMarginUp 1.3.6.1.4.1.529.23.10.1.1.50 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is above this parameter for more than ra-downshift-int-up sec, modem shall attemp to rate adapt (bitrate up).
               dmtAlDslNetworkProfile_MarginConfig_RaUpshiftIntUp 1.3.6.1.4.1.529.23.10.1.1.51 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is above ra-downshift-margin-up for more than this, modem shall attemp to rate adapt (bitrate up).
               dmtAlDslNetworkProfile_MarginConfig_RaUpshiftMarginDown 1.3.6.1.4.1.529.23.10.1.1.52 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is above this parameter for more than ra-downshift-int-down sec, modem shall attemp to rate adapt (bitrate up).
               dmtAlDslNetworkProfile_MarginConfig_RaUpshiftIntDown 1.3.6.1.4.1.529.23.10.1.1.53 integer read-write
Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is above ra-downshift-margin-down for more than this, modem shall attemp to rate adapt (bitrate up).
               dmtAlDslNetworkProfile_Action_o 1.3.6.1.4.1.529.23.10.1.1.54 integer read-write
Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.
               dmtAlDslNetworkProfile_LineConfig_VpSwitchingVpi 1.3.6.1.4.1.529.23.10.1.1.55 integer read-write
The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
               dmtAlDslNetworkProfile_LineConfig_MaxAggrPowerLevelUp 1.3.6.1.4.1.529.23.10.1.1.56 integer read-write
The maximum aggregate output power in dBm allowed on the line in the up stream direction. Increasing value may result in capacity boosting.
               dmtAlDslNetworkProfile_LineConfig_MaxAggrPowerLevelDown 1.3.6.1.4.1.529.23.10.1.1.57 integer read-write
The maximum aggregate output power in dBm allowed on the line in the down stream direction. Increasing value may result in capacity boosting.
               dmtAlDslNetworkProfile_LineConfig_LineCode 1.3.6.1.4.1.529.23.10.1.1.58 integer read-write
The DMT line code is used for the training. NOTE: for the ADSL 12-ports LIM card only (which uses the ALCATEL chipset), setting the line code to ansi-dmt will provide better line rate than auto-select for an ansi-dmt link. Therefore, set the line code to ansi-dmt for an ansi-dmt link to obtain optimal rate. Enumeration: 'legacyMode': 6, 'ansiDmt': 4, 'gDmt': 5, 'autoSelect': 3, 'gLite': 2, 'etsiAnnexB': 7.
               dmtAlDslNetworkProfile_LineConfig_LineLatencyDown 1.3.6.1.4.1.529.23.10.1.1.59 integer read-write
The DMT line latency to be used for the downstream data transport. Enumeration: 'interleave': 3, 'none': 1, 'fast': 2, 'both': 4.
               dmtAlDslNetworkProfile_LineConfig_LineLatencyUp 1.3.6.1.4.1.529.23.10.1.1.60 integer read-write
The DMT line latency to be used for the upstream data transport. Enumeration: 'interleave': 3, 'none': 1, 'fast': 2, 'both': 4.
               dmtAlDslNetworkProfile_LineConfig_TrellisEncoding 1.3.6.1.4.1.529.23.10.1.1.61 integer read-write
TRUE if trellis encoding is to be enabled, FALSE otherwise. Enumeration: 'yes': 2, 'no': 1.
               dmtAlDslNetworkProfile_LineConfig_GainDefault 1.3.6.1.4.1.529.23.10.1.1.62 integer read-write
The default gain value in db to be used for the AGC. Enumeration: 'n-16Db': 1, 'n-20Db': 2.
               dmtAlDslNetworkProfile_SparingMode 1.3.6.1.4.1.529.23.10.1.1.63 integer read-write
Port sparing operational mode for this port. Enumeration: 'automatic': 3, 'inactive': 1, 'manual': 2.
               dmtAlDslNetworkProfile_LineConfig_UpstreamStartBin 1.3.6.1.4.1.529.23.10.1.1.64 integer read-write
The starting upstream frequency bin.
               dmtAlDslNetworkProfile_LineConfig_UpstreamEndBin 1.3.6.1.4.1.529.23.10.1.1.65 integer read-write
The ending upstream frequency bin.
               dmtAlDslNetworkProfile_LineConfig_DownstreamStartBin 1.3.6.1.4.1.529.23.10.1.1.66 integer read-write
The starting downstream frequency bin.
               dmtAlDslNetworkProfile_LineConfig_DownstreamEndBin 1.3.6.1.4.1.529.23.10.1.1.67 integer read-write
The ending downstream frequency bin.
               dmtAlDslNetworkProfile_LineConfig_LoopBack 1.3.6.1.4.1.529.23.10.1.1.69 integer read-write
Configuration of different modem loopbacks. Enumeration: 'none': 1, 'analog': 2, 'digital': 3.
               dmtAlDslNetworkProfile_LineConfig_BitSwapping 1.3.6.1.4.1.529.23.10.1.1.70 integer read-write
Controls wether Bit-Swapping is enabled or no. On 12 port DMT card and 48 port G.lite card has not effect. Enumeration: 'yes': 2, 'no': 1.
               dmtAlDslNetworkProfile_LineConfig_FbmDbmMode 1.3.6.1.4.1.529.23.10.1.1.71 integer read-write
Controls wether the line is in Fixed-Bit-Map or Dual-Bit-Map mode. Only relevant for Annex-C cards. Enumeration: 'dbm': 2, 'fbm': 1.
               dmtAlDslNetworkProfile_ThreshProfile 1.3.6.1.4.1.529.23.10.1.1.72 displaystring read-write
The name of the DSL-THRESHOLD profile which applies to this ADSL line.
               dmtAlDslNetworkProfile_IgnoreLineup 1.3.6.1.4.1.529.23.10.1.1.73 integer read-write
Ignore line up value for this port. Enumeration: 'yes': 3, 'no': 2, 'systemDefined': 1.
               dmtAlDslNetworkProfile_LineConfig_AlcatelUs413Boost 1.3.6.1.4.1.529.23.10.1.1.74 integer read-write
Provides an increase in upstream rate in T1.413 mode for 24/48 Port Annex A boards based on the Globespan chip set when connected to an Alcatel CPE. Irrelevant for any other situtation. Use with extreme caution. Enumeration: 'new': 1, 'old': 2, 'unknown': 3.