ASCEND-HDSL2-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-HDSL2-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-WAN-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hdsl2LineStatusTable 1.3.6.1.4.1.529.4.12.1 no-access
HDSL2 status parameters.
     hdsl2LineStatusEntry 1.3.6.1.4.1.529.4.12.1.1 no-access
A interface status entry containing objects to describe the interface.
         hdsl2StatusIfEntryIndex 1.3.6.1.4.1.529.4.12.1.1.1 integer read-only
Interface group index assigned to this port.
         hdsl2StatusShelfIndex 1.3.6.1.4.1.529.4.12.1.1.2 integer read-only
TNT's HDSL2 modules Shelf ID.
         hdsl2StatusSlotIndex 1.3.6.1.4.1.529.4.12.1.1.3 integer read-only
TNT's HDSL2 modules Slot ID.
         hdsl2StatusLineIndex 1.3.6.1.4.1.529.4.12.1.1.4 integer read-only
HDSL2 modules line ID.
         hdsl2StatusUnitType 1.3.6.1.4.1.529.4.12.1.1.5 integer read-only
Unit type defines if the unit is operating either as a Central Office Equipment (COE) or Customer Premiss equipment (CPE). Enumeration: 'other': 1, 'coe': 2, 'cpe': 3.
         hdsl2StatusLineState 1.3.6.1.4.1.529.4.12.1.1.6 integer read-only
Interface state describes the current ports operating state. States are: Config, Pend Down, Up, Down, Start-up, or N/A. Enumeration: 'configure': 2, 'deactive-lost': 4, 'deactivate': 3, 'analog-loopback': 10, 'start-up': 5, 'up': 7, 'digital-loopback': 11, 'pend-port-up': 6, 'other': 1, 'pend-deactivate': 8, 'out-of-service': 9.
         hdsl2StatusOpRate 1.3.6.1.4.1.529.4.12.1.1.7 integer read-write
The current symetrical operation rate Enumeration: 'm1552000': 1552000.
         hdsl2StatusVendorId 1.3.6.1.4.1.529.4.12.1.1.8 integer read-only
Vendor identification.
         hdsl2StatusMajorFirmWareVer 1.3.6.1.4.1.529.4.12.1.1.9 integer read-only
Major firmware version.
         hdsl2StatusMinorFirmWareVer 1.3.6.1.4.1.529.4.12.1.1.10 integer read-only
Minor firmware version.
         hdsl2StatusHardWareVer 1.3.6.1.4.1.529.4.12.1.1.11 integer read-only
Hardware version.
 hdsl2LineStatisticTable 1.3.6.1.4.1.529.4.12.2 no-access
HDSL2 statistical parameters.
     hdsl2LineStatisticEntry 1.3.6.1.4.1.529.4.12.2.1 no-access
A interface statistical entry containing objects to describe the interface.
         hdsl2StatIfEntryIndex 1.3.6.1.4.1.529.4.12.2.1.1 integer read-only
The interface groups interface index is used to index into this table.
         hdsl2StatShelfIndex 1.3.6.1.4.1.529.4.12.2.1.2 integer read-only
HDSL2 modules Shelf ID.
         hdsl2StatSlotIndex 1.3.6.1.4.1.529.4.12.2.1.3 integer read-only
HDSL2 modules Slot ID.
         hdsl2StatLineIndex 1.3.6.1.4.1.529.4.12.2.1.4 integer read-only
HDSL2 modules interface ID.
         hdsl2StatConnUpDays 1.3.6.1.4.1.529.4.12.2.1.5 integer read-only
Connection up day count.
         hdsl2StatConnUpHours 1.3.6.1.4.1.529.4.12.2.1.6 integer read-only
Connection Up 24 hour count.
         hdsl2StatConnUpMinutes 1.3.6.1.4.1.529.4.12.2.1.7 integer read-only
Connection up minute count.
         hdsl2StatRxSignalPresent 1.3.6.1.4.1.529.4.12.2.1.8 integer read-only
Receive signal present detection. Enumeration: 'yes': 2, 'no': 1.
         hdsl2StatLineQualityDb 1.3.6.1.4.1.529.4.12.2.1.9 integer read-only
Lines noise margin. Reliable data will transfer with a reading of ??? or greater.
         hdsl2StatUpDwnCntr 1.3.6.1.4.1.529.4.12.2.1.10 integer read-only
Line Up Down counter value displays the number of times the interface transitions from a down to up state.
         hdsl2StatLineSelfTest 1.3.6.1.4.1.529.4.12.2.1.11 integer read-only
Line hardware self test results (Passed or Failed). Enumeration: 'other': 4, 'passed': 3, 'localLoopBackFailed': 2, 'selfTestFailed': 1.
         hdsl2StatTxPower 1.3.6.1.4.1.529.4.12.2.1.12 integer read-only
Lines transmit power.
         hdsl2StatFramerCrcErrors 1.3.6.1.4.1.529.4.12.2.1.13 integer read-only
Lines framer CRC errors.
         hdsl2StatFramerSyncStatus 1.3.6.1.4.1.529.4.12.2.1.14 integer read-only
Lines framer sync status .
         hdsl2StatFramerLosdCnt 1.3.6.1.4.1.529.4.12.2.1.15 integer read-only
Lines framer ???.
         hdsl2StatFramerSegaCnt 1.3.6.1.4.1.529.4.12.2.1.16 integer read-only
Lines framer ???.
         hdsl2StatFramerSegdCnt 1.3.6.1.4.1.529.4.12.2.1.17 integer read-only
Lines framer ???.
         hdsl2StatFramerRxHecErrors 1.3.6.1.4.1.529.4.12.2.1.18 integer read-only
Lines framer ???.
         hdsl2StatBertTimer 1.3.6.1.4.1.529.4.12.2.1.19 integer read-write
BER test duration configuration. The BER test lasts for the duration of this timer. Enumeration: 'three-minutes': 3, 'four-minutes': 4, 'fifteen-minutes': 7, 'thirty-minutes': 9, 'two-minutes': 2, 'twenty-minutes': 8, 'five-minutes': 5, 'ten-minutes': 6, 'one-minute': 1.
         hdsl2StatBertEna 1.3.6.1.4.1.529.4.12.2.1.20 integer read-write
Enable/disable of the BER test. If nodes are connected, then the BER test is ran between the units. If this node is not connected to a remote node, then the interface is placed into analog loopback and the BER test is started. Enumeration: 'yes': 2, 'no': 1.
         hdsl2StatBertState 1.3.6.1.4.1.529.4.12.2.1.21 integer read-only
BER test states. When this node is not connected to another node, the test is disabled. When two nodes are connected then the BER test waits for the other node to start it's BER test and then starts collecting bit errors immediately. Enumeration: 'bert-los': 6, 'start-up': 3, 'waiting': 4, 'stopped': 2, 'active': 1, 'pend-active': 5.
         hdsl2StatBertErrorCounter 1.3.6.1.4.1.529.4.12.2.1.22 integer read-only
BER test bit error counter.