ARUBAWIRED-VSX-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT PACKARD


 Home MIB: ARUBAWIRED-VSX-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ARUBAWIRED-NETWORKING-OID, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 arubaWiredVsxMIB 1.3.6.1.4.1.47196.4.1.1.3.7
This is the MIB module related to HPE Aruba VSX feature
     arubaWiredVsxConfig 1.3.6.1.4.1.47196.4.1.1.3.7.1
         arubaWiredVsxIslConfig 1.3.6.1.4.1.47196.4.1.1.3.7.1.1
             arubaWiredVsxIslPort 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.1 displaystring read-write
Interface name corresponding to the VSX InterSwitchLink port. A value of 0 means there is no ISL port configuration.
             arubaWiredVsxIslHelloInterval 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.2 integer32 read-write
ISLP hello interval in seconds. The default value is 1.
             arubaWiredVsxIslHoldTime 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.3 integer32 read-write
ISL port-flap hold time in seconds. The default value is 0.
             arubaWiredVsxIslHelloTimeout 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.4 integer32 read-write
ISL hello timeout in seconds. The default value is 3.
             arubaWiredVsxIslSystemID 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.5 displaystring read-only
Device identifier. This is advertised over ISL.
             arubaWiredVsxIslPlatformName 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.6 displaystring read-only
Device type. This is advertised over ISL.
             arubaWiredVsxIslSwVersion 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.7 displaystring read-only
S/W version running on the device type. This is advertised over ISL.
             arubaWiredVsxIslVIDList 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.8 vidlist read-only
VLAN IDs that the ISL port is a member of.
         arubaWiredVsxKeepAliveConfig 1.3.6.1.4.1.47196.4.1.1.3.7.1.2
             arubaWiredVsxKeepAliveSrcIPAddrType 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.1 inetaddresstype read-write
The KeepAlive source address type. It can be IPv4 or IPv6.
             arubaWiredVsxKeepAliveSrcIPAddr 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.2 inetaddress read-write
The KeepAlive source address. It can be IPv4 or IPv6.
             arubaWiredVsxKeepAliveVrf 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.3 displaystring read-write
The KeepAlive VRF domain.
             arubaWiredVsxKeepAliveUdpPort 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.4 integer32 read-write
The KeepAlive UDP port. Same port is used as source and destination UDP ports.
             arubaWiredVsxKeepAlivePeerIPAddrType 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.5 inetaddresstype read-write
The KeepAlive peer address type. It can be IPv4 or IPv6.
             arubaWiredVsxKeepAlivePeerIPAddr 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.6 inetaddress read-write
The KeepAlive peer address. It can be IPv4 or IPv6.
             arubaWiredVsxKeepAliveHelloInterval 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.7 integer32 read-write
KeepAlive hello interval in seconds. The default value is 1.
             arubaWiredVsxKeepAliveHelloTimeout 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.8 integer32 read-write
KeepAlive hello timeout in seconds. The default value is 3.
             arubaWiredVsxKeepAliveSystemID 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.9 displaystring read-only
Device identifier that will be advertised via KeepAlive protocol.
             arubaWiredVsxKeepAlivePlatformName 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.10 displaystring read-only
Device type that will be advertised via KeepAlive protocol.
             arubaWiredVsxKeepAliveSwVersion 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.11 displaystring read-only
S/W version that will be advertised via KeepAlive protocol.
         arubaWiredVsxAggregatorConfig 1.3.6.1.4.1.47196.4.1.1.3.7.1.3
             arubaWiredVsxAggregatorTable 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1 no-access
This table supplements the table 'dot3adAggTable' in ieee802.3ad mib.
                 arubaWiredVsxAggregatorEntry 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1 no-access
The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib.
                     arubaWiredVsxAggregatorIndex 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.1 interfaceindex no-access
The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.
                     arubaWiredVsxAggregatorType 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.2 integer read-only
This field specifies the aggregator/lag type. Enumeration: 'multiChassis': 2, 'point2Point': 1.
                     arubaWiredVsxVlanList 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.3 vidlist read-only
VLANs that this aggregator is a member of. This is used for configuration consistency validation.
                     arubaWiredVsxLoopProtectEnabled 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.4 truthvalue read-only
Loop Protect protocol admin state for this VSX. This is used for configuration consistency validation.
                     arubaWiredVsxLoadBalanceScheme 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.5 integer read-only
Load balance scheme configured for this VSX. This is used for configuration consistency validation. Enumeration: 'l3-Src-Dst': 2, 'l4-Src-Dst': 3, 'l2-Src-Dst': 1.
                     arubaWiredVsxCosOverride 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.6 integer read-only
CoS override configuration for this VSX. This is used for configuration consistency validation.
                     arubaWiredVsxDscpOverride 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.7 integer read-only
DSCP override configuration for this VSX. This is used for configuration consistency validation.
                     arubaWiredVsxQoSTrust 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.8 integer read-only
Port QoS trust mode configured for this VSX. This is used for configuration consistency validation. Enumeration: 'cos': 1, 'dscp': 2.
         arubaWiredVsxGlobalConfiguration 1.3.6.1.4.1.47196.4.1.1.3.7.1.4
             arubaWiredVsxDeviceRole 1.3.6.1.4.1.47196.4.1.1.3.7.1.4.1 integer read-only
VSX device role. Enumeration: 'primary': 1, 'notConfigured': 3, 'secondary': 2.
             arubaWiredVsxConfigSync 1.3.6.1.4.1.47196.4.1.1.3.7.1.4.2 integer read-only
VSX config sync. Enumeration: 'disabled': 2, 'enabled': 1.
     arubaWiredVsxStatus 1.3.6.1.4.1.47196.4.1.1.3.7.2
         arubaWiredVsxIslStatus 1.3.6.1.4.1.47196.4.1.1.3.7.2.1
             arubaWiredVsxIslOperState 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.1 integer read-only
ISL operational state. Enumeration: 'init': 1, 'outSync': 2, 'inSync': 3.
             arubaWiredVsxIslPduTx 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.2 integer32 read-only
Number of ISL PDUs transmitted by this device.
             arubaWiredVsxIslPduRx 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.3 integer32 read-only
Number of ISL PDUs received by this device.
             arubaWiredVsxIslHelloTx 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.4 integer32 read-only
Number of ISL Hello packets transmitted by this device.
             arubaWiredVsxIslHelloRx 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.5 integer32 read-only
Number of ISL Hello packets received by this device.
             arubaWiredVsxDeviceOperSystemID 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.6 displaystring read-only
System identifier used by this device - derived from system identifier values of the 2 devices.
         arubaWiredVsxKeepAliveStatus 1.3.6.1.4.1.47196.4.1.1.3.7.2.2
             arubaWiredVsxKeepAliveOperState 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.1 integer read-only
KeepAlive protocol operational state. Enumeration: 'inSyncEstablished': 3, 'configured': 2, 'outofSyncEstablished': 4, 'failed': 6, 'init': 1, 'stopped': 7, 'initEstablished': 5.
             arubaWiredVsxKeepAlivePacketsTx 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.2 integer32 read-only
Number of KeepAlive protocol packets transmitted by this device.
             arubaWiredVsxKeepAlivePacketsRx 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.3 integer32 read-only
Number of KeepAlive protocol packets received by this device.
             arubaWiredVsxKeepAlivePacketsDrop 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.4 integer32 read-only
Number of KeepAlive protocol packets dropped.
             arubaWiredVsxKeepAliveTimeoutCount 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.5 integer32 read-only
Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry.
             arubaWiredVsxKeepAliveLastEstablishedTime 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.6 timeticks read-only
Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established.
             arubaWiredVsxKeepAliveLastFailedTime 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.7 timeticks read-only
Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed.
     arubaWiredVsxNotifications 1.3.6.1.4.1.47196.4.1.1.3.7.3
         arubaWiredVsxTraps 1.3.6.1.4.1.47196.4.1.1.3.7.3.1
             islUp 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.1
An islUp trap signifies that ISL transitioned to inSync state
             islDown 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.2
An islDown trap signifies that ISL transitioned to outOfSync state
             keepAliveUp 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.3
A keepAliveUp trap signifies that KA is in established state
             keepAliveDown 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.4
A keepAliveDown trap signifies that KA is in failed state
             mclagLocalUpPeerUp 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.5
A mclagLocalUpPeerUp trap signifies that the McLAG is up in both the primary and secondary VSX devices.
             mclagLocalUpPeerDown 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.6
A mclagLocalUpPeerDown trap signifies that the McLAG is up in the local device but down in the peer VSX device.
             mclagLocalDownPeerUp 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.7
A mclagLocalDownPeerUp trap signifies that the McLAG is down in the local device but up in the peer VSX device.
             mclagLocalDownPeerDown 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.8
A mclagLocalDownPeerDown trap signifies that the McLAG is down in both the primary and secondary VSX devices.