ARUBAWIRED-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT PACKARD


 Home MIB: ARUBAWIRED-INTERFACE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ARUBAWIRED-NETWORKING-OID, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 arubaWiredInterfaceMIB 1.3.6.1.4.1.47196.4.1.1.3.24
This MIB module describes settings and properties that are applicable to interfaces
       arubaWiredInterfaceSettings 1.3.6.1.4.1.47196.4.1.1.3.24.1
           arubaWiredInterfaceTable 1.3.6.1.4.1.47196.4.1.1.3.24.1.1 no-access
Table of interface entries
               arubaWiredInterfaceEntry 1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1 no-access
An entry containing information applicable to a particular interface.
                   arubaWiredInterfaceIndex 1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.1 interfaceindex no-access
The index value that uniquely identifies the port on which the client IP tracker entry is enabled. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                   arubaWiredInterfaceAutoneg 1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.2 integer read-write
The desired auto-negotiation setting for the interface. Note that the configured setting may be ignored if the interface is not capable of auto-negotiation. Enumeration: 'on': 1, 'off': 2.
                   arubaWiredInterfaceDuplex 1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.3 integer read-write
The desired duplex setting for the interface. This setting may be ignored or set to default when auto-negotiation is on. Enumeration: 'full': 1, 'half': 2.
                   arubaWiredInterfaceSpeeds 1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.4 bits read-write
The desired list of operating speeds for the interface. When the interface auto-negotiates speed, this is the set of speeds to offer. When the interface does not auto-negotiate, this is the speed to use. Note that the configured speeds may be ignored if they are not compatible with the interface hardware or installed transceiver. Bits: 'speed2p5G': 3, 'speed40G': 7, 'speed400G': 11, 'speed200G': 10, 'speed1G': 2, 'speed800G': 12, 'speed100G': 9, 'speed50G': 8, 'speed10G': 5, 'speed5G': 4, 'speed100M': 1, 'speed25G': 6, 'speed10M': 0.
       arubaWiredInterfaceConformance 1.3.6.1.4.1.47196.4.1.1.3.24.2
           arubaWiredInterfaceGroups 1.3.6.1.4.1.47196.4.1.1.3.24.2.1
               arubaWiredInterfaceConfig 1.3.6.1.4.1.47196.4.1.1.3.24.2.1.1
A collection of objects providing interface config
           arubaWiredInterfaceCompliances 1.3.6.1.4.1.47196.4.1.1.3.24.2.2
               arubaWiredInterfaceCompliance 1.3.6.1.4.1.47196.4.1.1.3.24.2.2.1
The compliance statement for HP Switches with support for arubaWired client IP tracker objects.