ARRIS-D5-QAM-MIB: View SNMP OID List / Download MIB

VENDOR: ARRIS INTERACTIVE LLC


 Home MIB: ARRIS-D5-QAM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, DOCS-IF-MIB, ARRIS-D5-VIDEO-MIB, ENTITY-MIB, ARRIS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 d5QamMib 1.3.6.1.4.1.4115.1.8.1.5
Arris D5 UEQ QAM Management MIB
     d5QamRFObjects 1.3.6.1.4.1.4115.1.8.1.5.1
         d5QamRFChannelTable 1.3.6.1.4.1.4115.1.8.1.5.1.1 no-access
This table extends docsIfDownstreamChannelTable with extra RF properties.
             d5QamRFChannelEntry 1.3.6.1.4.1.4115.1.8.1.5.1.1.1 no-access
An entry for a D5 QAM Channel RF Properties
                 d5QamRFChannelAnnex 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.1 integer read-only
The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-J83 is used. annexB : Annex B from ITU-J83 is used. annexC : Annex C from ITU-J83 is used. Enumeration: 'annexA': 1, 'annexB': 2, 'other': 0, 'annexC': 3.
                 d5QamRFChannelFrequency 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.2 unsigned32 read-only
The center of the downstream frequency associated with this channel.
                 d5QamRFChannelModulation 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.3 integer read-only
The modulation type associated with this downstream channel. Enumeration: 'qam128': 7, 'qam256': 8, 'other': 0, 'qam64': 6.
                 d5QamRFChannelFECInterleaverLevel 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.4 integer read-only
This value contains the interleaving level in Annex B standard. Level 1 (static) is specified for 64-QAM transmission only. This mode accommodates the installed based of legacy 64-QAM only digital set top. While in this level, a single interleaving depth is supported, nameley I=128, J=1. Level 2 (variable) encompasses both 64-QAM and 256-QAM transmissions and is capable of supporting variable interleaving, whose depth is specified in d5QamRFChannelFECInterleaverMode Enumeration: 'variable': 2, 'fixed': 1.
                 d5QamRFChannelFECInterleaverMode 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.5 integer read-only
This value contain the control word representing a specific interleaving depth for Annex B level 2 (variable) interleaving standard, which is one of the following: 0 - I=128 J=1 1 - I=128 J=1 2 - I=128 J=2 3 - I=64 J=2 4 - I=128 J=3 5 - I=32 J=4 6 - I=128 J=4 7 - I=16 J=8 8 - I=128 J=5 9 - I=8 J=16 10 - I=128 J=6 11 - reserved 13 - I=128 J=6 12 - I=128 J=7 14 - I=128 J=8 15 - reserved 16 - reserved
                 d5QamRFChannelPower 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.6 tenthdbmv read-only
the transmit power associated with this channel.
                 d5QamRFChannelSpectralInversion 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.7 truthvalue read-only
true(1) if QAM Channel carrier spectrum is inverted
                 d5QamRFChannelSymbolRate 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.8 unsigned32 read-only
Symbol rate of current transmission, this value is fixed for 64-QAM and 256-QAM transmission in Annex B standard. It is variable in Annex A standard and can only be changed while in this mode.
                 d5QamRFChannelWidth 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.9 unsigned32 read-only
The distance between the center frequencies of the downstream frequency associated with this channel.
                 d5QamRFChannelRowStatus 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.99 rowstatus read-only
The RowStatus for controlling entries in this table.
     d5QamStatObjects 1.3.6.1.4.1.4115.1.8.1.5.3
         d5QamStatProgramCounterTable 1.3.6.1.4.1.4115.1.8.1.5.3.1 no-access
This table contains counters of all MPEG packets whose PIDs are associated with a program currently being streamed through a QAM interface
             d5QamStatProgramCounterEntry 1.3.6.1.4.1.4115.1.8.1.5.3.1.1 no-access
An entry for a single program stream on a QAM interface
                 d5QamStatProgramCounterQamIfIndex 1.3.6.1.4.1.4115.1.8.1.5.3.1.1.1 interfaceindex read-only
QAM interface associated with program stream.
                 d5QamStatProgramCounterProgram 1.3.6.1.4.1.4115.1.8.1.5.3.1.1.2 d5program read-only
Program Number of program stream.
                 d5QamStatProgramCounterPackets 1.3.6.1.4.1.4115.1.8.1.5.3.1.1.3 counter32 read-only
Count of all MPEG packets associated with the program stream.
     d5QamSpareObjects 1.3.6.1.4.1.4115.1.8.1.5.4
         d5QamSpareGroupTable 1.3.6.1.4.1.4115.1.8.1.5.4.1 no-access
This table contains QAM physical entities that are part of redundancy spare groups. Spare groups are identified by the spare entity itself through its physical index. A group must contain 1 to N primaries QAM entities allowing 1:1 or 1:N redundancy ability.
             d5QamSpareGroupEntry 1.3.6.1.4.1.4115.1.8.1.5.4.1.1 no-access
Each entry describe a single QAM physical entity and its relationship to and role within a spare group.
                 d5QamSpareGroupPrimaryPhysicalIndex 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.1 physicalindex read-only
The Physical Index of the QAM entity.
                 d5QamSpareGroupSparePhysicalIndex 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.2 physicalindex read-only
The Physical Index of the QAM spare entity. Spare must identify itself.
                 d5QamSpareGroupFailbackMode 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.3 integer read-only
Must be 'none' for primary entities. For spare entities, it defines the failback mode when the fault has cleared. Enumeration: 'auto': 2, 'none': 0, 'manual': 1.
                 d5QamSpareGroupFailoverStatus 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.4 integer read-only
The status of this physical entity in spare group. active: indicates that a primary entity is running normally. indicates that a spare entity has been failed over. standby: indicates that spare entity is standing by. switched: indicates that a primary entity has failed over to spare. fail: indicates that either primary or spare are not in service. Enumeration: 'active': 1, 'standby': 2, 'fail': 4, 'switched': 3.
                 d5QamSpareGroupRowStatus 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.99 rowstatus read-only
The RowStatus for controlling entries in this table.
         d5QamSpareGroupTraps 1.3.6.1.4.1.4115.1.8.1.5.4.2
             d5QamSpareGroupFailOver 1.3.6.1.4.1.4115.1.8.1.5.4.2.1
This event signifies that a primary QAM physical entity has been switched over to its spare.
             d5QamSpareGroupFailBack 1.3.6.1.4.1.4115.1.8.1.5.4.2.2
This event signifies that a primary QAM physical entity is no longer switched over to spare, which has been restored to stand-by duty.
     d5QamDocsisObjects 1.3.6.1.4.1.4115.1.8.1.5.5
         d5QamDocsisChannelTable 1.3.6.1.4.1.4115.1.8.1.5.5.1 no-access
This table extends docsIfDownstreamChannelTable with DOCSIS properties.
             d5QamDocsisChannelEntry 1.3.6.1.4.1.4115.1.8.1.5.5.1.1 no-access
An entry for a D5 QAM Channel DOCSIS Properties
                 d5QamDocsisChannelDtiOffset 1.3.6.1.4.1.4115.1.8.1.5.5.1.1.1 integer read-write
DOCSIS Timing Interface: offset to be added to egress SYNC timestamp messages.
     d5QamMonitorObjects 1.3.6.1.4.1.4115.1.8.1.5.6
         d5QamSnoopObjects 1.3.6.1.4.1.4115.1.8.1.5.6.1
             d5QamSnoopTable 1.3.6.1.4.1.4115.1.8.1.5.6.1.1 no-access
This table lists of QAM channels under snoop.
                 d5QamSnoopEntry 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1 no-access
An entry for a single D5 QAM channel snoop
                     d5QamSnoopProbe 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.1 integer read-only
This value returns the probe type for snooping, which can be one of: post-mux: probe after muxing stage and before RF modulation post-rf: probe after RF modulation using builtin demodulator Enumeration: 'post-rf': 2, 'post-mux': 1.
                     d5QamSnoopTSID 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.2 unsigned32 read-only
After row creation, this value is read only and returns the current Transport Stream Identifier for this QAM channel. On row creation, if this value is non-zero, it will be used as an alternative identifier to ifIndex for the QAM channel; in which case, ifIndex must be 0.
                     d5QamSnoopEncapsulation 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.3 integer read-only
The value contains the encapsulation type for snooped data. Enumeration: 'udp': 0.
                     d5QamSnoopIpSrc 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.4 ipaddress read-only
This value returns the source IP address of snooped packets
                     d5QamSnoopPortSrc 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.5 unsigned32 read-only
This value returns the source port of snooped packets
                     d5QamSnoopIpDest 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.6 ipaddress read-only
This value contains the target IP address of snooped packets
                     d5QamSnoopPortDest 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.7 unsigned32 read-only
This value contains the target port of snooped packets
                     d5QamSnoopRowStatus 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.99 rowstatus read-only
The RowStatus for controlling entries in this table.
             d5QamSnoopTOS 1.3.6.1.4.1.4115.1.8.1.5.6.1.2 unsigned32 read-write
The value is used to fill in the Type Of Service field for egress IP packets containing snooped data.
             d5QamSnoopVlanPriority 1.3.6.1.4.1.4115.1.8.1.5.6.1.3 unsigned32 read-write
The value is used to fill in the VLAN priority field for egress Ethernet frames containing snooped IP packets.
         d5QamRFSignalObjects 1.3.6.1.4.1.4115.1.8.1.5.6.2
             d5QamRFSignalQualityTable 1.3.6.1.4.1.4115.1.8.1.5.6.2.1 no-access
This table lists signal quality for QAM channels.
                 d5QamRFSignalQualityEntry 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1 no-access
An entry for a single D5 QAM channel
                     d5QamRFSigQMeasureControl 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.1 integer read-only
This value indicates wether on-board demodulator scans this channel for RF signal quality measurement. Enumeration: 'off': 0, 'scan': 1.
                     d5QamRFSigQMeasureDelay 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.2 unsigned32 read-only
This value contains the amount of time in milliseconds the demodulator stay on this channel once it has acquired a lock. The longer the time, the more relevant the measurement, a value of zero means that only lock status will be a meaningful measurement.
                     d5QamRFSigQMpegLock 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.3 truthvalue read-only
This value returns whether the on-board demodulator has acquired a full MPEG lock the last time if was scanning this channel.
                     d5QamRFSigQBitErrorRate 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.4 gauge32 read-only
This value returns the bit error rate measured during the last scan period. This value is in the order of 10E-08.
                     d5QamRFSigQUnerroreds 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.5 counter32 read-only
The value returns the accumulated count of unerrored codewords for all previous scan periods since this counter was cleared.
                     d5QamRFSigQCorrecteds 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.6 counter32 read-only
The value returns the accumulated count of corrected codewords for all previous scan periods since this counter was cleared.
                     d5QamRFSigQUncorrectables 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.7 counter32 read-only
The value returns the accumulated count of uncorrected codewords for all previous scan periods since this counter was cleared.
                     d5QamRFSigQSignalNoise 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.8 tenthdb read-only
This value returns the Signal To Noise ratio measured during the last scan period.
     d5QamConformance 1.3.6.1.4.1.4115.1.8.1.5.99
           d5QamObjectGroups 1.3.6.1.4.1.4115.1.8.1.5.99.1
               d5QamRFObjectGroup 1.3.6.1.4.1.4115.1.8.1.5.99.1.1
The d5QamRF group of objects.
               d5QamStatObjectGroup 1.3.6.1.4.1.4115.1.8.1.5.99.1.2
The d5QamStat group of objects.
               d5QamSpareObjectGroup 1.3.6.1.4.1.4115.1.8.1.5.99.1.3
The d5QamSpare group of objects.
               d5QamDocsisObjectGroup 1.3.6.1.4.1.4115.1.8.1.5.99.1.4
The d5Docsis group of objects.
               d5QamSnoopObjectGroup 1.3.6.1.4.1.4115.1.8.1.5.99.1.5
The d5QamSnoop group of objects.
               d5QamRFSigQObjectGroup 1.3.6.1.4.1.4115.1.8.1.5.99.1.6
The d5QamRFSignalQuality group of objects.
           d5QamNotificationGroups 1.3.6.1.4.1.4115.1.8.1.5.99.2
               d5QamSpareGroupNotificationGroup 1.3.6.1.4.1.4115.1.8.1.5.99.2.1
The d5QamSpare group of notifications.
           d5QamCompliances 1.3.6.1.4.1.4115.1.8.1.5.99.3
               d5QamCompliance 1.3.6.1.4.1.4115.1.8.1.5.99.3.1
The compliance statement for ARRIS-D5-QAM-MIB.