ARRIS-CM-DEVICE-MIB: View SNMP OID List / Download MIB

VENDOR: ARRIS INTERACTIVE LLC


 Home MIB: ARRIS-CM-DEVICE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ARRIS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 arrisCmDevMib 1.3.6.1.4.1.4115.1.3.1
This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices.
     arrisCmDevMibObjects 1.3.6.1.4.1.4115.1.3.1.1
         arrisCmDevBase 1.3.6.1.4.1.4115.1.3.1.1.1
             arrisCmDevWanIsolationState 1.3.6.1.4.1.4115.1.3.1.1.1.1 integer read-write
The object controls the state of WAN Isolation. The meaning of the state is as follows: off-InActiveMode(1) - Data traffic passes freely between the home user's network and the outside network (i.e. the Internet). In this mode, the WAN Isolation state is considered 'InActive'. on-ActiveMode(2) - The home user's network is isolated from the Internet. Data traffic will not pass between the home user's network and the Internet. In this mode, the WAN Isolation state is considered 'Active'. Enumeration: 'off-InActiveMode': 1, 'on-ActiveMode': 2.
             arrisCmDevSwImageName 1.3.6.1.4.1.4115.1.3.1.1.1.2 displaystring read-only
The name of the software image currently operating on this device.
             arrisCmDevSwImageBuildTime 1.3.6.1.4.1.4115.1.3.1.1.1.3 displaystring read-only
The build date and time of the software image currently operating on this device.
         arrisCmDevCmSetup 1.3.6.1.4.1.4115.1.3.1.1.2
             arrisCmDevPermanentSetup 1.3.6.1.4.1.4115.1.3.1.1.2.2
             arrisCmDevOperationalSetup 1.3.6.1.4.1.4115.1.3.1.1.2.3
                 arrisCmDevProvMethodIndicator 1.3.6.1.4.1.4115.1.3.1.1.2.3.2 arrscmdevprovmethod read-write
Indicates the method used to provision the device. This object should only be changed by the configuration file. The following provisioning methods are supported: docsisOnly(0) - DOCSIS-only provisioning fullPacketCable(1) - fully PacketCable compliant provisioning packetCableMinusKDC(2) - same as 'fullPacketCable', except with IPSEC and SNMPv3 disabled cps(3) - compatible with CPS2000 (SNMPv2; IPSEC disabled) gupi(4) - SNMPv2, with no SNMP Informs and IPSEC disabled singleMAC(5) - single config file (SNMPv2, single IP address, single MAC address, no SNMP Informs, IPSEC disabled)
                 arrisCmDevEnableDocsis20 1.3.6.1.4.1.4115.1.3.1.1.2.3.3 truthvalue read-write
This object is used to enable/disable DOCSIS 2.0 operation mode. This object is stored into NVRAM and will be operational after the next reboot of the device. Set to true(1) to enable DOCSIS 2.0 operation mode. Set to false(2) to disable DOCSIS 2.0 operation mode. Setting this object to the same value that is already stored in NVRAM will do nothing. After the successful setting of this object, the device will automatically reboot.
             arrisCmDevSalesSetup 1.3.6.1.4.1.4115.1.3.1.1.2.4
         arrisCmDevCmTest 1.3.6.1.4.1.4115.1.3.1.1.3
             arrisCmDevManufacturingTest 1.3.6.1.4.1.4115.1.3.1.1.3.2
             arrisCmDevOperationalTest 1.3.6.1.4.1.4115.1.3.1.1.3.3