ARCserve-Alarm-MIB: View SNMP OID List / Download MIB

VENDOR: CHEYENNE SOFTWARE


 Home MIB: ARCserve-Alarm-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cheyenne 1.3.6.1.4.1.46
       arcServe 1.3.6.1.4.1.46.877
               arcServeRev 1.3.6.1.4.1.46.877.1
                   arcServeevMajor 1.3.6.1.4.1.46.877.1.1 integer read-only
The major revision level of ARCserve (left of the decimal). Used for presence checking.
                   arcServeRevMinor 1.3.6.1.4.1.46.877.1.2 integer read-only
The minor revision level of ARCserve (right of the decimal).
               arcServeParmsTrapEnable 1.3.6.1.4.1.46.877.2 integer read-write
Indicates whether agent should or should not send traps.
               arcServeParmsPollTime 1.3.6.1.4.1.46.877.3 integer read-write
Seconds between checking for traps.
               arcServeServerName 1.3.6.1.4.1.46.877.4 octet string read-only
ARCserve server which generated trap.
               arcServetrapdesc 1.3.6.1.4.1.46.877.5 octet string read-only
A description of a specific Cheyenne trap
                 arcServetrapHigh 1.3.6.1.4.1.46.8770.1
ARCserve Critical Trap A Critical trap has been generated by ARCserve. Refer to the trap summary information for a detailed description of this trap. A critical trap normally indicates a serious error has occurred.
                 arcServetrapMed 1.3.6.1.4.1.46.8770.2
ARCserve Minor Trap A minor trap has been generated by ARCserve. Minor traps are used by ARCserve to warn the user of unusual, but not fatal incidents. Review the message summary to determine if this trap should concern you.
                 arcServetrapLow 1.3.6.1.4.1.46.8770.3
ARCserve Informational Trap An ARCserve informational trap has been generated by ARCserve.
                 arcServetrap4 1.3.6.1.4.1.46.8770.4
Failed to locate job list service. This trap signifies that ARCserve was unable to locate it's NetWare queue or Windows NT/UNIX Job list. This problem can be caused in NetWare by Bindery or Directory Services corruption or by the deletion of the ARCserve queue.
                 arcServetrap5 1.3.6.1.4.1.46.8770.5
Failed to retrieve job from Job List Service. This trap signifies that ARCserve cannot process jobs. Under NetWare, this is normally due to a Bindery or Directory Services corruption. Please verify that ARCserve was completely installed and that your Bindery/Directory is not corrupted.
                 arcServetrap6 1.3.6.1.4.1.46.8770.7
Failed to allocate memory. This trap signifies that ARCserve was unable to allocate memory. More server memory may be required if this message occurs on a regular basis. This message is not normally fatal, unless repeated attempts for memory fail.
                 arcServetrap7 1.3.6.1.4.1.46.8770.8
Server is low on memory, cannot start jobs. This trap signifies that server is so low on memory that jobs cannot be processed. Shutdown any unnecessary modules to obtain additional memory so that jobs can be processed. Jobs will be processed when sufficeint memory has been restored on the server.
                 arcServetrap9 1.3.6.1.4.1.46.8770.9
Failed to format tape. This trap signifies that ARCserve was unable to format a tape. This could be caused by hardware or media failure. Verify tape drive has been cleaned and all cable connections. This message can also occur when an invalid board driver has been loaded.
                 arcServetrap8 1.3.6.1.4.1.46.8770.9
Same license found on another server. This trap signifies that another server has the same license as the server which generated the server. You must install different licenses on each ARCserve server.
                 arcServetrap10 1.3.6.1.4.1.46.8770.10
Failed to read tape header. This trap signifies a hardware or device failure when trying to read the tape header. Verify that the tape is an ARCserve formatted tape. Also verify that the tape drive has been cleaned and all cables are properly connected. This message can also be displayed when an invalid board driver has been loaded.
                 arcServetrap11 1.3.6.1.4.1.46.8770.11
Failed to access tape. This trap signifies that ARCserve was unable to access the the tape. Also verify that the tape drive has been cleaned and all cables are properly connected. This message can also be displayed when an invalid board driver has been loaded.
                 arcServetrap12 1.3.6.1.4.1.46.8770.12
Backup Operation Cancelled. This trap indicates that the backup job has been cancelled. This is normally due to an operator cancelling/deleting a job from the ARCserve job list.
                 arcServetrap13 1.3.6.1.4.1.46.8770.13
Backup Operation Successful This trap signifies that the backup operation completed successfully.
                 arcServetrap14 1.3.6.1.4.1.46.8770.14
Backup Operation Incomplete This trap signifies that the backup operation completed with warnings. Refer to the activity log to determine if important nodes selected for backup have been missed.
                 arcServetrap15 1.3.6.1.4.1.46.8770.15
Backup Operation Failed This trap signifies that backup operation failed. This message indicates that the backup encountered serious processing errors. Refer to the activity log for a description of the problems en- countered which caused the backup failed.