ALTEON-TIGON-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: ALTEON NETWORKS


 Home MIB: ALTEON-TIGON-SWITCH-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ALTEON-ROOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hardware 1.3.6.1.4.1.1872.2.1.1
     hwPartNumber 1.3.6.1.4.1.1872.2.1.1.1 displaystring read-only
The hardware part number of the Alteon Switch.
     hwRevision 1.3.6.1.4.1.1872.2.1.1.2 displaystring read-only
The hardware revision. If the revision is not available, a zero length string should be returned.
     hwPowerSupplyStatus 1.3.6.1.4.1.1872.2.1.1.3 integer read-only
The status of the internal power supply. Enumeration: 'bad': 2, 'ok': 1.
     hwRedundantPSPresent 1.3.6.1.4.1.1872.2.1.1.4 integer read-only
Existence of redundant power supply. Enumeration: 'notPresent': 3, 'present': 4.
     hwRedundantPSStatus 1.3.6.1.4.1.1872.2.1.1.5 integer read-only
The status of the redundant power supply. Enumeration: 'bad': 2, 'ok': 1, 'notPresent': 3.
     hwSensor1Temp 1.3.6.1.4.1.1872.2.1.1.6 integer read-only
The temperature of the rear left sensor in degrees Celsius.
     hwSensor2Temp 1.3.6.1.4.1.1872.2.1.1.7 integer read-only
The temperature of the rear middle sensor in degrees Celsius.
     hwSensor3Temp 1.3.6.1.4.1.1872.2.1.1.8 integer read-only
The temperature of the front middle sensor in degrees Celsius.
     hwSensor4Temp 1.3.6.1.4.1.1872.2.1.1.9 integer read-only
The temperature of the front right sensor in degrees Celsius.
 agent 1.3.6.1.4.1.1872.2.1.2
     agGeneral 1.3.6.1.4.1.1872.2.1.2.1
         agSaveConfiguration 1.3.6.1.4.1.1872.2.1.2.1.1 integer read-write
This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read. Enumeration: 'notSaveActive': 3, 'ok': 1, 'saveActive': 2.
         agApplyConfiguration 1.3.6.1.4.1.1872.2.1.2.1.2 integer read-write
This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. Enumeration: 'apply': 2, 'other': 1.
         agApplyPending 1.3.6.1.4.1.1872.2.1.2.1.3 integer read-only
This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above. Enumeration: 'applyNeeded': 2, 'noApplyNeeded': 3.
         agReset 1.3.6.1.4.1.1872.2.1.2.1.4 integer read-write
This is an action object to reboot the agent. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)... Enumeration: 'warmReset': 3, 'other': 1, 'coldReset': 2.
         agConfigForNxtReset 1.3.6.1.4.1.1872.2.1.2.1.5 integer read-write
The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block Enumeration: 'active': 2, 'default': 4, 'backup': 3.
         agImageForNxtReset 1.3.6.1.4.1.1872.2.1.2.1.6 integer read-write
The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 Enumeration: 'image2': 3, 'image1': 2.
         agSoftwareVersion 1.3.6.1.4.1.1872.2.1.2.1.7 displaystring read-only
The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.
         agBootVer 1.3.6.1.4.1.1872.2.1.2.1.8 displaystring read-only
The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
         agImage1Ver 1.3.6.1.4.1.1872.2.1.2.1.9 displaystring read-only
The version of the software image stored in image 1 storage in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
         agImage2Ver 1.3.6.1.4.1.1872.2.1.2.1.10 displaystring read-only
The version of the software image stored in image 2 storage in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
         agRtcDate 1.3.6.1.4.1.1872.2.1.2.1.11 displaystring read-write
The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
         agRtcTime 1.3.6.1.4.1.1872.2.1.2.1.12 displaystring read-write
The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
         agTftpServerIpAddr 1.3.6.1.4.1.1872.2.1.2.1.13 ipaddress read-write
The TFTP server IP address.
         agTftpImageFileName 1.3.6.1.4.1.1872.2.1.2.1.14 displaystring read-write
The image file name to be downloaded.
         agTftpImage 1.3.6.1.4.1.1872.2.1.2.1.15 integer read-write
Whether the image file should be loaded in image1 or image2 in flash. Enumeration: 'image2': 3, 'image1': 2.
         agTftpDownload 1.3.6.1.4.1.1872.2.1.2.1.16 integer read-write
This is an action object to cause to download software image according to the setup of agTftpServerIpAddr, agTftpImageFileName, agTftpImage when download(2) is issued. other(1) is returned always when read. Enumeration: 'download': 2, 'other': 1.
         agLastSetErrorReason 1.3.6.1.4.1.1872.2.1.2.1.17 displaystring read-only
The error reason of the last SET failure.
         agTftpServer 1.3.6.1.4.1.1872.2.1.2.1.18 displaystring read-write
The TFTP server IP address or domain name.
         agTftpCfgFileName 1.3.6.1.4.1.1872.2.1.2.1.19 displaystring read-write
The configuration file name.
         agTftpDumpFileName 1.3.6.1.4.1.1872.2.1.2.1.20 displaystring read-write
The file name for core dump.
         agTftpAction 1.3.6.1.4.1.1872.2.1.2.1.21 integer read-write
This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. other(1) is returned always when read. Enumeration: 'img-get': 2, 'other': 1, 'dump-put': 5, 'cfg-get': 3, 'cfg-put': 4.
         agTftpLastActionStatus 1.3.6.1.4.1.1872.2.1.2.1.22 displaystring read-only
The recorded status of the previous TFTP activity.
         agRevert 1.3.6.1.4.1.1872.2.1.2.1.23 integer read-write
This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read. Enumeration: 'other': 1, 'revert': 2.
         agRevertApply 1.3.6.1.4.1.1872.2.1.2.1.24 integer read-write
This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. Enumeration: 'revertApply': 2, 'other': 1.
         agEnabledSwFeatures 1.3.6.1.4.1.1872.2.1.2.1.25 displaystring read-only
The software features that are enabled on the switch.
         agClrSyslogMsgs 1.3.6.1.4.1.1872.2.1.2.1.26 integer read-write
Clears all current Syslog messages. Enumeration: 'reset': 2, 'other': 1.
         agSavePending 1.3.6.1.4.1.1872.2.1.2.1.27 integer read-only
This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash. Enumeration: 'noSaveNeeded': 2, 'saveNeeded': 1.
         agEnabledGslbKey 1.3.6.1.4.1.1872.2.1.2.1.28 integer read-only
Query if software key Global slb enabled on switch. Enumeration: 'disabled': 2, 'enabled': 1.
         agEnabledBwmKey 1.3.6.1.4.1.1872.2.1.2.1.29 integer read-only
Query if software key Bandwidth Mgmt. enabled on switch. Enumeration: 'disabled': 2, 'enabled': 1.
         agSlotNumber 1.3.6.1.4.1.1872.2.1.2.1.30 integer read-only
Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
         agEnabledRurlKey 1.3.6.1.4.1.1872.2.1.2.1.31 integer read-only
The status of the RURL software key. Enumeration: 'disabled': 2, 'enabled': 1.
     agGeneralConfig 1.3.6.1.4.1.1872.2.1.2.2
         agNewCfgSyslogHost 1.3.6.1.4.1.1872.2.1.2.2.1 ipaddress read-write
The syslog host IP address, in the new_configuration block.
         agCurCfgSyslogHost 1.3.6.1.4.1.1872.2.1.2.2.2 ipaddress read-only
The syslog host IP address, as currently configured in the current_configuration block.
         agNewCfgBootp 1.3.6.1.4.1.1872.2.1.2.2.3 integer read-write
Enable or disable the use of BootP, in the new_configuration block. Enumeration: 'disabled': 3, 'enabled': 2.
         agCurCfgBootp 1.3.6.1.4.1.1872.2.1.2.2.4 integer read-only
Enable or disable the use of BootP, as currently configured in the current_configuration block. Enumeration: 'disabled': 3, 'enabled': 2.
         agNewCfgSpanningTree 1.3.6.1.4.1.1872.2.1.2.2.5 integer read-write
Turn On or Off Spanning Tree Protocol for the switch, in the new_configuration block. Enumeration: 'on': 2, 'off': 3.
         agCurCfgSpanningTree 1.3.6.1.4.1.1872.2.1.2.2.6 integer read-only
The state of Spanning Tree Protocol for the switch, as currently configured in the current_configuration block. Enumeration: 'on': 2, 'off': 3.
         agTrapHostTableMaxEnt 1.3.6.1.4.1.1872.2.1.2.2.7 integer read-only
The maximum number of rows in the trap host table.
         agCurCfgTrapHostTable 1.3.6.1.4.1.1872.2.1.2.2.8 no-access
The table of trap hosts which to send SNMP traps in the current_configuration block.
             agCurCfgTrapHostEntry 1.3.6.1.4.1.1872.2.1.2.2.8.1 no-access
A row in the trap host table in the current_configuration block.
                 agCurCfgTrapHostIndx 1.3.6.1.4.1.1872.2.1.2.2.8.1.1 integer read-only
The index of the row in trap host table.
                 agCurCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.1.2.2.8.1.2 ipaddress read-only
The IP address of a trap host.
                 agCurCfgTrapHostCommString 1.3.6.1.4.1.1872.2.1.2.2.8.1.3 displaystring read-only
The SNMP community string to use with the trap host
         agNewCfgTrapHostTable 1.3.6.1.4.1.1872.2.1.2.2.9 no-access
The table of trap hosts which to send SNMP traps in the new_configuration block.
             agNewCfgTrapHostEntry 1.3.6.1.4.1.1872.2.1.2.2.9.1 no-access
A row in the trap host table in the new_configuration block.
                 agNewCfgTrapHostIndx 1.3.6.1.4.1.1872.2.1.2.2.9.1.1 integer read-only
The index of the row in trap host table.
                 agNewCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.1.2.2.9.1.2 ipaddress read-write
The IP address of a trap host.
                 agNewCfgTrapHostCommString 1.3.6.1.4.1.1872.2.1.2.2.9.1.3 displaystring read-write
The SNMP community string to use with the trap host
         agCurCfgHttpServerPort 1.3.6.1.4.1.1872.2.1.2.2.10 integer read-only
The TCP port number that the HTTP server is listening to in the current_configuration block.
         agNewCfgHttpServerPort 1.3.6.1.4.1.1872.2.1.2.2.11 integer read-write
The TCP port number that the HTTP server is listening to in the new_configuration block.
         agCurCfgLoginBanner 1.3.6.1.4.1.1872.2.1.2.2.12 displaystring read-only
The user defined login banner.
         agNewCfgLoginBanner 1.3.6.1.4.1.1872.2.1.2.2.13 displaystring read-write
The user defined login banner.
         agNewCfgSyslog2Host 1.3.6.1.4.1.1872.2.1.2.2.14 ipaddress read-write
The second syslog host IP address, in the new_configuration block.
         agCurCfgSyslog2Host 1.3.6.1.4.1.1872.2.1.2.2.15 ipaddress read-only
The second syslog host IP address, as currently configured in the current_configuration block.
         agCurCfgSyslogFac 1.3.6.1.4.1.1872.2.1.2.2.16 integer read-only
The facility of syslog host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
         agNewCfgSyslogFac 1.3.6.1.4.1.1872.2.1.2.2.17 integer read-write
The facility of syslog host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
         agCurCfgSyslog2Fac 1.3.6.1.4.1.1872.2.1.2.2.18 integer read-only
The facility of syslog2 host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
         agNewCfgSyslog2Fac 1.3.6.1.4.1.1872.2.1.2.2.19 integer read-write
The facility of syslogs host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
         agCurCfgSmtpHost 1.3.6.1.4.1.1872.2.1.2.2.20 displaystring read-only
The user defined SMTP host.
         agNewCfgSmtpHost 1.3.6.1.4.1.1872.2.1.2.2.21 displaystring read-write
The user defined SMTP host.
         agCurCfgConsole 1.3.6.1.4.1.1872.2.1.2.2.22 integer read-only
Enable or disable console output of syslog messages. Enumeration: 'disabled': 2, 'enabled': 1.
         agNewCfgConsole 1.3.6.1.4.1.1872.2.1.2.2.23 integer read-write
Enable or disable console output of syslog messages. Enumeration: 'disabled': 2, 'enabled': 1.
         agCurCfgMgmtNetwork 1.3.6.1.4.1.1872.2.1.2.2.24 ipaddress read-only
The management network - corresponding to the mnet command of the slb configuration menu.
         agNewCfgMgmtNetwork 1.3.6.1.4.1.1872.2.1.2.2.25 ipaddress read-write
The management network - corresponding to the mnet command of the system menu.
         agCurCfgMgmtMask 1.3.6.1.4.1.1872.2.1.2.2.26 ipaddress read-only
The management subnet mask - corresponding to the mmask command of the system configuration menu.
         agNewCfgMgmtMask 1.3.6.1.4.1.1872.2.1.2.2.27 ipaddress read-write
The management subnet mask - corresponding to the mmask command of the system configuration menu.
         agNTP 1.3.6.1.4.1.1872.2.1.2.2.28
               agCurCfgNTPServer 1.3.6.1.4.1.1872.2.1.2.2.28.1 ipaddress read-only
The NTP Server Address.
               agNewCfgNTPServer 1.3.6.1.4.1.1872.2.1.2.2.28.2 ipaddress read-write
The NTP Server Address.
               agCurCfgNTPResyncInterval 1.3.6.1.4.1.1872.2.1.2.2.28.3 integer read-only
The NTP Server resync interval in minutes.
               agNewCfgNTPResyncInterval 1.3.6.1.4.1.1872.2.1.2.2.28.4 integer read-write
The NTP Server resync interval in minutes.
               agCurCfgNTPTzone 1.3.6.1.4.1.1872.2.1.2.2.28.5 displaystring read-only
The NTP Server timezone offset from GMT in hours.
               agNewCfgNTPTzone 1.3.6.1.4.1.1872.2.1.2.2.28.6 displaystring read-write
The NTP Server timezone offset from GMT in hours.
               agCurCfgNTPDlight 1.3.6.1.4.1.1872.2.1.2.2.28.7 integer read-only
Enable/disable daylight savings time. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgNTPDlight 1.3.6.1.4.1.1872.2.1.2.2.28.8 integer read-write
Enable/disable daylight savings time. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgNTPService 1.3.6.1.4.1.1872.2.1.2.2.28.9 integer read-only
Enable/disable NTP Service. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgNTPService 1.3.6.1.4.1.1872.2.1.2.2.28.10 integer read-write
Enable/disable NTP Service. Enumeration: 'disabled': 2, 'enabled': 1.
         agLog 1.3.6.1.4.1.1872.2.1.2.2.29
               agNewCfgSyslogTrapConsole 1.3.6.1.4.1.1872.2.1.2.2.29.1 integer read-write
Enable or disable console syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapConsole 1.3.6.1.4.1.1872.2.1.2.2.29.2 integer read-only
Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapSystem 1.3.6.1.4.1.1872.2.1.2.2.29.3 integer read-write
Enable or disable system level syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapSystem 1.3.6.1.4.1.1872.2.1.2.2.29.4 integer read-only
Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapMgmt 1.3.6.1.4.1.1872.2.1.2.2.29.5 integer read-write
Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapMgmt 1.3.6.1.4.1.1872.2.1.2.2.29.6 integer read-only
Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapCli 1.3.6.1.4.1.1872.2.1.2.2.29.7 integer read-write
Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapCli 1.3.6.1.4.1.1872.2.1.2.2.29.8 integer read-only
Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapStp 1.3.6.1.4.1.1872.2.1.2.2.29.9 integer read-write
Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapStp 1.3.6.1.4.1.1872.2.1.2.2.29.10 integer read-only
Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapVlan 1.3.6.1.4.1.1872.2.1.2.2.29.11 integer read-write
Enable or disable VLAN syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapVlan 1.3.6.1.4.1.1872.2.1.2.2.29.12 integer read-only
Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapSlb 1.3.6.1.4.1.1872.2.1.2.2.29.13 integer read-write
Enable or disable SLB syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapSlb 1.3.6.1.4.1.1872.2.1.2.2.29.14 integer read-only
Enable or disable SLB syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapGslb 1.3.6.1.4.1.1872.2.1.2.2.29.15 integer read-write
Enable or disable GSLB syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapGslb 1.3.6.1.4.1.1872.2.1.2.2.29.16 integer read-only
Enable or disable GSLB syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapFilter 1.3.6.1.4.1.1872.2.1.2.2.29.17 integer read-write
Enable or disable filter syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapFilter 1.3.6.1.4.1.1872.2.1.2.2.29.18 integer read-only
Enable or disable filter syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapSsh 1.3.6.1.4.1.1872.2.1.2.2.29.19 integer read-write
Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapSsh 1.3.6.1.4.1.1872.2.1.2.2.29.20 integer read-only
Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapVrrp 1.3.6.1.4.1.1872.2.1.2.2.29.21 integer read-write
Enable or disable VRRP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapVrrp 1.3.6.1.4.1.1872.2.1.2.2.29.22 integer read-only
Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapBgp 1.3.6.1.4.1.1872.2.1.2.2.29.23 integer read-write
Enable or disable BGP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapBgp 1.3.6.1.4.1.1872.2.1.2.2.29.24 integer read-only
Enable or disable BGP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapNtp 1.3.6.1.4.1.1872.2.1.2.2.29.25 integer read-write
Enable or disable NTP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapNtp 1.3.6.1.4.1.1872.2.1.2.2.29.26 integer read-only
Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapIsd 1.3.6.1.4.1.1872.2.1.2.2.29.27 integer read-write
Enable or disable ISD syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapIsd 1.3.6.1.4.1.1872.2.1.2.2.29.28 integer read-only
Enable or disable ISD syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapIp 1.3.6.1.4.1.1872.2.1.2.2.29.31 integer read-write
Enable or disable IP related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapIp 1.3.6.1.4.1.1872.2.1.2.2.29.32 integer read-only
Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapWeb 1.3.6.1.4.1.1872.2.1.2.2.29.35 integer read-write
Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapWeb 1.3.6.1.4.1.1872.2.1.2.2.29.36 integer read-only
Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapSynAtk 1.3.6.1.4.1.1872.2.1.2.2.29.37 integer read-write
Enable or disable SYN attack detection related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapSynAtk 1.3.6.1.4.1.1872.2.1.2.2.29.38 integer read-only
Enable or disable SYN attack detection related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agNewCfgSyslogTrapTcpLim 1.3.6.1.4.1.1872.2.1.2.2.29.39 integer read-write
Enable or disable TCP rate limiting related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
               agCurCfgSyslogTrapTcpLim 1.3.6.1.4.1.1872.2.1.2.2.29.40 integer read-only
Enable or disable TCP rate limiting related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
 stats 1.3.6.1.4.1.1872.2.1.8
     memStats 1.3.6.1.4.1.1872.2.1.8.12
           memStatsAllocs 1.3.6.1.4.1.1872.2.1.8.12.1 counter read-only
The total number of memory allocations.
           memStatsFrees 1.3.6.1.4.1.1872.2.1.8.12.2 counter read-only
The total number of memory frees.
           memStatsAllocFails 1.3.6.1.4.1.1872.2.1.8.12.3 counter read-only
The total number of memory allocations failed.
           memStatsBytesCurr 1.3.6.1.4.1.1872.2.1.8.12.4 gauge read-only
The outstanding memory in bytes have been allocated.
           memStatsBytesHiwat 1.3.6.1.4.1.1872.2.1.8.12.5 gauge read-only
Bytes allocated witch high water mark.
           memStatsPoolBytes 1.3.6.1.4.1.1872.2.1.8.12.6 gauge read-only
The total bytes in the memory pool.
           memStatsLargest 1.3.6.1.4.1.1872.2.1.8.12.7 gauge read-only
The largest block has been allocated.
     pktStats 1.3.6.1.4.1.1872.2.1.8.13
           pktStatsAllocs 1.3.6.1.4.1.1872.2.1.8.13.1 counter read-only
The total packets have been allocated.
           pktStatsFrees 1.3.6.1.4.1.1872.2.1.8.13.2 counter read-only
The total packets have been freed.
           pktStatsAllocFails 1.3.6.1.4.1.1872.2.1.8.13.3 counter read-only
The total packet allocations failed.
           pktStatsMediums 1.3.6.1.4.1.1872.2.1.8.13.4 counter read-only
The number of medium size packets have been allocated.
           pktStatsJumbos 1.3.6.1.4.1.1872.2.1.8.13.5 counter read-only
The number of jumbo size packets have been allocated.
           pktStatsSmalls 1.3.6.1.4.1.1872.2.1.8.13.6 counter read-only
The number of small size packets have been allocated.
     mpCpuStats 1.3.6.1.4.1.1872.2.1.8.16
           mpCpuAStatsUtil1Second 1.3.6.1.4.1.1872.2.1.8.16.1 integer read-only
The utilization of MP CPU A over 1 second. It shows the percentage.
           mpCpuBStatsUtil1Second 1.3.6.1.4.1.1872.2.1.8.16.2 integer read-only
The utilization of MP CPU B over 4 seconds. It shows the percentage.
           mpCpuAStatsUtil4Seconds 1.3.6.1.4.1.1872.2.1.8.16.3 integer read-only
The utilization of MP CPU A over 4 seconds. It shows the percentage.
           mpCpuBStatsUtil4Seconds 1.3.6.1.4.1.1872.2.1.8.16.4 integer read-only
The utilization of MP CPU B over 4 seconds. It shows the percentage.
           mpCpuAStatsUtil64Seconds 1.3.6.1.4.1.1872.2.1.8.16.5 integer read-only
The utilization of MP CPU A over 64 seconds. It shows the percentage.
           mpCpuBStatsUtil64Seconds 1.3.6.1.4.1.1872.2.1.8.16.6 integer read-only
The utilization of MP CPU B over 64 second. It shows the percentage.
 information 1.3.6.1.4.1.1872.2.1.9
 altswitchTraps 1.3.6.1.4.1.1872.2.1.13
 operCmds 1.3.6.1.4.1.1872.2.1.14
 radius 1.3.6.1.4.1.1872.2.1.16
       radCurCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.1.16.1 ipaddress read-only
The IP address of the Primary RADIUS server.
       radNewCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.1.16.2 ipaddress read-write
The IP address of the Primary RADIUS server.
       radCurCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.1.16.3 ipaddress read-only
The IP address of the Secondary RADIUS server.
       radNewCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.1.16.4 ipaddress read-write
The IP address of the Secondary RADIUS server.
       radCurCfgPort 1.3.6.1.4.1.1872.2.1.16.5 integer read-only
Specify the RADIUS port number.
       radNewCfgPort 1.3.6.1.4.1.1872.2.1.16.6 integer read-write
Speicfy the RADIUS port number.
       radCurCfgTimeout 1.3.6.1.4.1.1872.2.1.16.7 integer read-only
The maximum number of seconds before resending authentication to RADIUS server.
       radNewCfgTimeout 1.3.6.1.4.1.1872.2.1.16.8 integer read-write
The maximum number of seconds before resending authentication to RADIUS server.
       radCurCfgRetries 1.3.6.1.4.1.1872.2.1.16.9 integer read-only
Number of retries to the RADIUS server.
       radNewCfgRetries 1.3.6.1.4.1.1872.2.1.16.10 integer read-write
Number of retries to the RADIUS server.
       radCurCfgState 1.3.6.1.4.1.1872.2.1.16.11 integer read-only
Enable or disbale RADIUS authentication. Enumeration: 'disabled': 3, 'enabled': 2.
       radNewCfgState 1.3.6.1.4.1.1872.2.1.16.12 integer read-write
Enable or disable RADIUS authentication. Enumeration: 'disabled': 3, 'enabled': 2.
       radCurCfgAuthenString 1.3.6.1.4.1.1872.2.1.16.13 displaystring read-only
The RADIUS authentication string.
       radNewCfgAuthenString 1.3.6.1.4.1.1872.2.1.16.14 displaystring read-write
The RADIUS authentication string.
       radCurCfgTelnet 1.3.6.1.4.1.1872.2.1.16.15 integer read-only
Enable or disbale RADIUS backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
       radNewCfgTelnet 1.3.6.1.4.1.1872.2.1.16.16 integer read-write
Enable or disable RADIUS backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.