ALTEON-CHEETAH-LAYER4-MIB: View SNMP OID List / Download MIB

VENDOR: ALTEON NETWORKS


 Home MIB: ALTEON-CHEETAH-LAYER4-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ALTEON-ROOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 layer4 1.3.6.1.4.1.1872.2.5.4
The MIB module for the Alteon OS Layer 4 configuration, statistics and information .
     layer4Configs 1.3.6.1.4.1.1872.2.5.4.1
         slbCfg 1.3.6.1.4.1.1872.2.5.4.1.1
             slbGeneralCfg 1.3.6.1.4.1.1872.2.5.4.1.1.1
                 slbCurCfgGlobalControl 1.3.6.1.4.1.1872.2.5.4.1.1.1.1 integer read-only
The global state of Server Load Balancing. Enumeration: 'disabled': 3, 'enabled': 2.
                 slbNewCfgGlobalControl 1.3.6.1.4.1.1872.2.5.4.1.1.1.2 integer read-write
The global state of Server Load Balancing. Enumeration: 'disabled': 3, 'enabled': 2.
                 slbCurCfgImask 1.3.6.1.4.1.1872.2.5.4.1.1.1.3 ipaddress read-only
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
                 slbNewCfgImask 1.3.6.1.4.1.1872.2.5.4.1.1.1.4 ipaddress read-write
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
                 slbCurCfgMnet 1.3.6.1.4.1.1872.2.5.4.1.1.1.5 ipaddress read-only
The management network - corresponding to the mnet command of the slb configuration menu.
                 slbNewCfgMnet 1.3.6.1.4.1.1872.2.5.4.1.1.1.6 ipaddress read-write
The management network - corresponding to the mnet command of the slb configuration menu.
                 slbCurCfgMmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.7 ipaddress read-only
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
                 slbNewCfgMmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.8 ipaddress read-write
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
                 slbCurCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.1.9 displaystring read-only
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
                 slbNewCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.1.10 displaystring read-write
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
                 slbCurCfgDirectMode 1.3.6.1.4.1.1872.2.5.4.1.1.1.11 integer read-only
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgDirectMode 1.3.6.1.4.1.1872.2.5.4.1.1.1.12 integer read-write
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgPmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.13 ipaddress read-only
The persistent mask - corresponding to the pmask command of the slb configuration menu.
                 slbNewCfgPmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.14 ipaddress read-write
The persistent mask - corresponding to the pmask command of the slb configuration menu.
                 slbCurCfgGrace 1.3.6.1.4.1.1872.2.5.4.1.1.1.15 integer read-only
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgGrace 1.3.6.1.4.1.1872.2.5.4.1.1.1.16 integer read-write
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.5.4.1.1.1.17 integer read-only
Enable or disable Virtual Matrix Architecture. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.5.4.1.1.1.18 integer read-write
Enable or disable Virtual Matrix Architecture. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgFastage 1.3.6.1.4.1.1872.2.5.4.1.1.1.19 integer read-only
Session table fast-age (1 sec) period bit shift.
                 slbNewCfgFastage 1.3.6.1.4.1.1872.2.5.4.1.1.1.20 integer read-write
Session table fast-age (1 sec) period bit shift.
                 slbCurCfgSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.21 integer read-only
Session table slow-age (2 min) period bit shift.
                 slbNewCfgSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.22 integer read-write
Session table slow-age (2 min) period bit shift.
                 slbCurCfgTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.1.23 integer read-only
Enable or disable Transparent Proxy Cache Protocol. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.1.24 integer read-write
Enable or disable Transparent Proxy Cache Protocol. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgMetricInterval 1.3.6.1.4.1.1872.2.5.4.1.1.1.25 integer read-only
The interval of response and bandwidth metric updates.
                 slbNewCfgMetricInterval 1.3.6.1.4.1.1872.2.5.4.1.1.1.26 integer read-write
The interval of response and bandwidth metric updates.
                 slbCurCfgLdapVersion 1.3.6.1.4.1.1872.2.5.4.1.1.1.27 integer read-only
The version number for LDAP. Enumeration: 'version2': 1, 'version3': 2.
                 slbNewCfgLdapVersion 1.3.6.1.4.1.1872.2.5.4.1.1.1.28 integer read-write
The Version number of LDAP. Enumeration: 'version2': 1, 'version3': 2.
                 slbCurCfgAllowHttpHc 1.3.6.1.4.1.1872.2.5.4.1.1.1.29 integer read-only
Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgAllowHttpHc 1.3.6.1.4.1.1872.2.5.4.1.1.1.30 integer read-write
Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.31 integer read-only
Enable or disable Source MAC Address substitution. Enabling this feature supercedes individual real server setting for Source MAC Address substitution. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.32 integer read-write
Enable or disable Source MAC Address substitution. Enabling this feature supercedes individual real server setting for Source MAC Address substitution. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgProxyGratArp 1.3.6.1.4.1.1872.2.5.4.1.1.1.33 integer read-only
Enable or disable Proxy IP Gratuitous ARP. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgProxyGratArp 1.3.6.1.4.1.1872.2.5.4.1.1.1.34 integer read-write
Enable or disable Proxy IP Gratuitous ARP. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgRtsVlan 1.3.6.1.4.1.1872.2.5.4.1.1.1.35 integer read-only
Enable or disable use VLAN info for real server lookup Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgRtsVlan 1.3.6.1.4.1.1872.2.5.4.1.1.1.36 integer read-write
Enable or disable use VLAN info for real server lookup Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgVirtualServiceStats 1.3.6.1.4.1.1872.2.5.4.1.1.1.37 integer read-only
Enable/disable Virtual Service Statistics. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgVirtualServiceStats 1.3.6.1.4.1.1872.2.5.4.1.1.1.38 integer read-write
Enable/disable Virtual Service Statistics. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgSlbSessAtkIntrval 1.3.6.1.4.1.1872.2.5.4.1.1.1.39 integer read-only
Set SLB session attack inspection interval.
                 slbNewCfgSlbSessAtkIntrval 1.3.6.1.4.1.1872.2.5.4.1.1.1.40 integer read-write
Set SLB session attack inspection interval.
                 slbCurCfgSlbSessAtkAllowlim 1.3.6.1.4.1.1872.2.5.4.1.1.1.41 integer read-only
Set SLB session attack alert allowable limit.
                 slbNewCfgSlbSessAtkAllowlim 1.3.6.1.4.1.1872.2.5.4.1.1.1.42 integer read-write
Set SLB session attack alert allowable limit.
                 slbCurCfgNewSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.43 integer read-only
Session table slow-age (2 min) period bit shift.
                 slbNewCfgNewSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.44 integer read-write
Session table slow-age (2 min) period bit shift.
                 slbCurCfgPortBind 1.3.6.1.4.1.1872.2.5.4.1.1.1.45 integer read-only
Enable/disable ingress port for session table Binding. SP uses ingress port for session lookup when set to enable. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgPortBind 1.3.6.1.4.1.1872.2.5.4.1.1.1.46 integer read-write
Enable/disable ingress port for session table Binding. SP uses ingress port for session lookup when set to enable. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgVmaSrcPort 1.3.6.1.4.1.1872.2.5.4.1.1.1.47 integer read-only
Enable/disable VMA source port. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgVmaSrcPort 1.3.6.1.4.1.1872.2.5.4.1.1.1.48 integer read-write
Enable/disable VMA source port. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgIpTcpCksum 1.3.6.1.4.1.1872.2.5.4.1.1.1.49 integer read-only
Enable/disable Layer 7 IP/TCP Checksum Validation. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgIpTcpCksum 1.3.6.1.4.1.1872.2.5.4.1.1.1.50 integer read-write
Enable/disable Layer 7 IP/TCP Checksum Validation. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgAuxRipHash 1.3.6.1.4.1.1872.2.5.4.1.1.1.51 integer read-only
Enable/disable Include RIP in AUX table hashing. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgAuxRipHash 1.3.6.1.4.1.1872.2.5.4.1.1.1.52 integer read-write
Enable/disable Include RIP in AUX table hashing. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgClearBackup 1.3.6.1.4.1.1872.2.5.4.1.1.1.53 integer read-only
Enable/Disable clear backup in the current config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgClearBackup 1.3.6.1.4.1.1872.2.5.4.1.1.1.54 integer read-write
Enable/Disable clear backup in the new config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgmStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.55 integer read-only
Measuring period for Acceleration, HTTP and SSL offloading statistics in the current config.
                 slbNewCfgmStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.56 integer read-write
Measuring period for Acceleration, HTTP and SSL offloading statistics in the new config.
                 slbCurCfgvStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.57 integer read-only
Enable/Disable Virtual Service Statistics in the current config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgvStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.58 integer read-write
Enable/Disable Virtual Service Statistics in the new config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgVmaDip 1.3.6.1.4.1.1872.2.5.4.1.1.1.59 integer read-only
Enable/Disable VMA with destination IP in the current config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgVmaDip 1.3.6.1.4.1.1872.2.5.4.1.1.1.60 integer read-write
Enable/Disable VMA with destination IP in the new config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgClsRst 1.3.6.1.4.1.1872.2.5.4.1.1.1.61 integer read-only
Enable/Disable Session clear on RST in the current config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgClsRst 1.3.6.1.4.1.1872.2.5.4.1.1.1.62 integer read-write
Enable/Disable Session clear on RST in the new config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgRtsIpLkp 1.3.6.1.4.1.1872.2.5.4.1.1.1.63 integer read-only
Enable/Disable RTS-IP lookup in the current config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgRtsIpLkp 1.3.6.1.4.1.1872.2.5.4.1.1.1.64 integer read-write
Enable/Disable RTS-IP lookup in the new config. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgPprefix 1.3.6.1.4.1.1872.2.5.4.1.1.1.65 integer read-only
The ipv6 persistent prefix length - corresponding to the pmask command of the slb configuration menu.
                 slbNewCfgPprefix 1.3.6.1.4.1.1872.2.5.4.1.1.1.66 integer read-write
The ipv6 persistent prefix length - corresponding to the pmask command of the slb configuration menu.
                 slbCurCfgSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.67 integer read-only
Enable or disable DMAC substitution. Enabling this feature supercedes individual real server setting for DMAC substitution. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.68 integer read-write
Enable or disable DMAC substitution. Enabling this feature supercedes individual real server setting for DMAC substitution. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgpVlanTag 1.3.6.1.4.1.1872.2.5.4.1.1.1.69 integer read-only
Enable or disable preserving vlan tag during packet forwarding Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgpVlanTag 1.3.6.1.4.1.1872.2.5.4.1.1.1.70 integer read-write
Enable or disable preserving vlan tag during packet forwarding Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgNmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.71 ipaddress read-only
The session mask in the current config block.
                 slbNewCfgNmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.72 ipaddress read-write
The session mask in the new config block.
             realServerCfg 1.3.6.1.4.1.1872.2.5.4.1.1.2
                 slbRealServerMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.2.1 integer32 read-only
The maximum number of entries in SLB RealServerTable.
                 slbCurCfgRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.2 no-access
The table of Real Server configuration in the current_config.
                     slbCurCfgRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1 no-access
Information about a particular Real Server configuration.
                         slbCurCfgRealServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.1 integer32 read-only
The real server number
                         slbCurCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.2 ipaddress read-only
IP address of the real server identified by the instance of the slbRealServerIndex.
                         slbCurCfgRealServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.3 integer read-only
The server weight.
                         slbCurCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.4 integer read-only
The maximum number of connections that are allowed.
                         slbCurCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.5 integer read-only
The maximum number of minutes an inactive connection remains open.
                         slbCurCfgRealServerBackUp 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.6 integer32 read-only
The backup server number for this server.
                         slbCurCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.7 integer read-only
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
                         slbCurCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.8 integer read-only
The number of failed attempts to declare this server DOWN.
                         slbCurCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.9 integer read-only
The number of successful attempts to declare a server UP.
                         slbCurCfgRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.10 integer read-only
Enable or disable the server and remove the existing sessions using disabled-with-fastage option. Enumeration: 'disabled': 3, 'disabled-with-fastage': 4, 'enabled': 2.
                         slbCurCfgRealServerType 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.11 integer read-only
The server type. It participates in global server load balancing when it is configured as remote-server. Enumeration: 'local-server': 1, 'remote-server': 2.
                         slbCurCfgRealServerName 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.12 displaystring read-only
The name of the real server.
                         slbCurCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.13 octet string read-only
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
                         slbCurCfgRealServerCookie 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.14 integer read-only
The real server that will handle client requests that doesn't contain an URL cookie if Cookie loadbalance is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.15 integer read-only
The real server will handle requests that don't match the loadbalance string if it is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.16 integer read-only
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerProxy 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.17 integer read-only
The real server config to enable/disable client proxy operation. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerLdapwr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.18 integer read-only
The real server config to enable/disable LDAP write server. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerOid 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.19 displaystring read-only
The OID to be sent in the SNMP get request packet.
                         slbCurCfgRealServerCommString 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.20 displaystring read-only
The community string to be used in the SNMP get request packet.
                         slbCurCfgRealServerIdsvlan 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.21 integer read-only
The VLAN to be associated with the IDS server.
                         slbCurCfgRealServerIdsport 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.22 integer32 read-only
The port to be connected to the IDS server.
                         slbCurCfgRealServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.23 integer read-only
The remote real server Global SLB availability.
                         slbCurCfgRealServerFastHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.24 integer read-only
The real server config to enable/disable Fast Health Check Operation. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.25 integer read-only
The real server config to enable/disable MAC DA substitution for L4 traffic. If disabled, we will NOT substitute the MAC DA of client-to-server frames. If enabled(default), we will substitute the MAC DA. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerOverflow 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.26 integer read-only
The real server config to enable/disable Overflow. If enabled(default) allows Backup server to kick in if real server reaches maximum connections. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerBkpPreempt 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.27 integer read-only
The real server config to enable/disable backup preemption. If enabled (default)allows to preempt the backup server when the primary server comes up. If disabled the backup server will continue to serve the traffic even when primary server comes up. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgRealServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.28 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         slbCurCfgRealServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.29 displaystring read-only
IPV6 address of the real server identified by the instance of the slbRealServerIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                 slbNewCfgRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.3 no-access
The table of Real Server configuration in the new_config.
                     slbNewCfgRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1 no-access
Information about a particular Real Server configuration.
                         slbNewCfgRealServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.1 integer32 read-only
The real server number
                         slbNewCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.2 ipaddress read-only
IP address of the real server identified by the instance of slbRealServerIndex.
                         slbNewCfgRealServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.3 integer read-only
The server weight.
                         slbNewCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.4 integer read-only
The maximum number of connections that are allowed.
                         slbNewCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.5 integer read-only
The maximum number of minutes an inactive connection remains open.
                         slbNewCfgRealServerBackUp 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.6 integer32 read-only
The backup server number for this server.
                         slbNewCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.7 integer read-only
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
                         slbNewCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.8 integer read-only
The number of failed attempts to declare this server DOWN.
                         slbNewCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.9 integer read-only
The number of successful attempts to declare a server UP.
                         slbNewCfgRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.10 integer read-only
Enable or disable the server and remove the existing sessions using disabled-with-fastage option. Enumeration: 'disabled': 3, 'disabled-with-fastage': 4, 'enabled': 2.
                         slbNewCfgRealServerDelete 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.11 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgRealServerType 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.12 integer read-only
The server type. It participates in global server load balancing when it is configured as remote-server. Enumeration: 'local-server': 1, 'remote-server': 2.
                         slbNewCfgRealServerName 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.13 displaystring read-only
The name of the real server.
                         slbNewCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.14 octet string read-only
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
                         slbNewCfgRealServerAddUrl 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.15 integer32 read-only
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read.
                         slbNewCfgRealServerRemUrl 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.16 integer32 read-only
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read.
                         slbNewCfgRealServerCookie 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.17 integer read-only
Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.18 integer read-only
Enable or disable exclusionary matching string on real server. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.19 integer read-only
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerProxy 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.20 integer read-only
The real server config to enable/disable client proxy operation. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerLdapwr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.21 integer read-only
The real server config to enable/disable LDAP write server. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerOid 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.22 displaystring read-only
The OID to be sent in the SNMP get request packet.
                         slbNewCfgRealServerCommString 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.23 displaystring read-only
The community string to be used in the SNMP get request packet.
                         slbNewCfgRealServerIdsvlan 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.24 integer read-only
The VLAN to be associated with IDS server.
                         slbNewCfgRealServerIdsport 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.25 integer32 read-only
The port to be connected to IDS server.
                         slbNewCfgRealServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.26 integer read-only
The remote real server Global SLB availability.
                         slbNewCfgRealServerFastHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.27 integer read-only
The real server config to enable/disable Fast Health Check Operation. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.28 integer read-only
The real server config to enable/disable MAC DA substitution for L4 traffic. If disabled, we will NOT substitute the MAC DA of client-to-server frames. If enabled(default), we will substitute the MAC DA. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerOverflow 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.29 integer read-only
The real server config to enable/disable Overflow. If enabled(default) allows Backup server to kick in if real server reaches maximum connections. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerBkpPreempt 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.30 integer read-only
The real server config to enable/disable backup preemption. If enabled (default)allows to preempt the backup server when the primary server comes up. If disabled the backup server will continue to serve the traffic even when primary server comes up. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgRealServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.31 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         slbNewCfgRealServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.32 displaystring read-only
IPV6 address of the real server identified by the instance of the slbRealServerIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         slbNewCfgRealServerNxtRportIdx 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.33 integer read-only
The next available free slot index number, to add the real port to the server. Value 0 will be returned if no free slot available.
                         slbNewCfgRealServerNxtBuddyIdx 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.34 integer read-only
The next available free slot Buddy index number, to add the Buddy Server to the Real server. Value 0 will be returned if no free slot available.
                 slbRealServPortTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.2.4 integer32 read-only
The maximum number of entries in SLB RealServPortTable.
                 slbCurCfgRealServPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.5 no-access
The table of real server service ports.
                     slbCurCfgRealServPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1 no-access
A row in the real server service ports table.
                         slbCurCfgRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.1 integer32 read-only
The number of the real server.
                         slbCurCfgRealServPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.2 integer32 read-only
The port index. This has no external meaning
                         slbCurCfgRealServRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.3 integer read-only
The layer4 real service port number.
                 slbNewCfgRealServPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.6 no-access
The table of real server service ports.
                     slbNewCfgRealServPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1 no-access
A row in the real server service ports table.
                         slbNewCfgRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.1 integer32 read-only
The number of the real server.
                         slbNewCfgRealServPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.2 integer32 read-only
The port index. This has no external meaning
                         slbNewCfgRealServRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.3 integer read-only
The layer4 real service port number.
                         slbNewCfgRealServPortDelete 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.4 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgRealServRealPortFreeIdx 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.5 integer read-only
The first free port index number of the real server. Value 0 will be returned when all 64 ports are configured for a real server.
                 slbBuddyTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.2.7 integer32 read-only
The maximum number of entries in SLB real buddy server table.
                 slbCurCfgBuddyTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.8 no-access
The table of buddy information.
                     slbCurCfgBuddyEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1 no-access
A row in the buddy server table.
                         slbCurCfgRealSerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.1 integer32 read-only
The number of the real server.
                         slbCurCfgBuddyIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.2 integer32 read-only
The buddy index. This has no external meaning
                         slbCurCfgBuddyRealIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.3 integer32 read-only
The buddy server's real server number.
                         slbCurCfgBuddyGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.4 integer32 read-only
The buddy server's real group number.
                         slbCurCfgBuddyService 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.5 integer read-only
The buddy server's service.
                 slbNewCfgBuddyTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.9 no-access
The table of buddy servers.
                     slbNewCfgBuddyEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1 no-access
A row in the real server buddy table.
                         slbNewCfgRealSerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.1 integer32 read-only
The number of the real server.
                         slbNewCfgBuddyIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.2 integer32 read-only
The buddy index. This has no external meaning
                         slbNewCfgBuddyRealIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.3 integer32 read-only
The buddy server's real server number.
                         slbNewCfgBuddyGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.4 integer32 read-only
The buddy server's real group number.
                         slbNewCfgBuddyService 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.5 integer read-only
The buddy server's service.
                         slbNewCfgBuddyDelete 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.6 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
             realServerGroupCfg 1.3.6.1.4.1.1872.2.5.4.1.1.3
                 slbGroupTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.3.1 integer32 read-only
The maximum number of entries in SLB group tables.
                 slbGroupMaxIdsSize 1.3.6.1.4.1.1872.2.5.4.1.1.3.2 integer32 read-only
The maximum number of groups IDS can be enabled on.
                 slbCurCfgGroupTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.3 no-access
The table of groups
                     slbCurCfgGroupEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1 no-access
A row in the slbCurCfgGroupTable
                         slbCurCfgGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.1 integer32 read-only
The group number for which the information pertains.
                         slbCurCfgGroupRealServers 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.2 octet string read-only
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
                         slbCurCfgGroupMetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.3 integer read-only
The metric used to select next server in group. Enumeration: 'svcLeast': 8, 'hash': 4, 'leastConnections': 2, 'minMisses': 3, 'bandwidth': 6, 'phash': 7, 'roundRobin': 1, 'response': 5.
                         slbCurCfgGroupBackupServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.4 integer32 read-only
The backup real server for this group.
                         slbCurCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.5 integer32 read-only
The backup real server group for this group.
                         slbCurCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.6 displaystring read-only
The specific content which is examined during health checks. The content depends on the type of health check.
                         slbCurCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.7 integer read-only
The OSI layer at which servers are health checked. Enumeration: 'tcp': 2, 'wtls': 30, 'radiusacs': 39, 'ldap': 31, 'rtsp': 42, 'sipping': 43, 'pop3': 6, 'httphead': 44, 'script44': 143, 'script41': 140, 'wsp': 29, 'script58': 157, 'script59': 158, 'script52': 151, 'script53': 152, 'script50': 149, 'script51': 150, 'script56': 155, 'script57': 156, 'script54': 153, 'script55': 154, 'arp': 33, 'script39': 138, 'script30': 129, 'script31': 130, 'script32': 131, 'script33': 132, 'script34': 133, 'script35': 134, 'script36': 135, 'script37': 136, 'script28': 127, 'radius': 10, 'script63': 162, 'ftp': 8, 'radiusaa': 48, 'script49': 148, 'script48': 147, 'script45': 144, 'dhcp': 47, 'script47': 146, 'script46': 145, 'nntp': 7, 'script40': 139, 'script43': 142, 'script42': 141, 'wtp': 41, 'script29': 128, 'wts': 46, 'script23': 122, 'script22': 121, 'script21': 120, 'script20': 119, 'script27': 126, 'script26': 125, 'script25': 124, 'script24': 123, 'udpdns': 32, 'tftp': 40, 'script38': 137, 'script18': 117, 'script19': 118, 'script16': 27, 'script17': 116, 'script14': 25, 'script15': 26, 'script12': 23, 'script13': 24, 'script10': 21, 'script11': 22, 'sslh': 11, 'dns': 4, 'sslv3': 49, 'snmp5': 38, 'snmp4': 37, 'snmp1': 34, 'snmp3': 36, 'snmp2': 35, 'link': 28, 'icmp': 1, 'imap': 9, 'sipoptions': 45, 'smtp': 5, 'script4': 15, 'script5': 16, 'script6': 17, 'script7': 18, 'script1': 12, 'script2': 13, 'script3': 14, 'script8': 19, 'script9': 20, 'script64': 163, 'http': 3, 'script62': 161, 'script61': 160, 'script60': 159.
                         slbCurCfgGroupName 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.8 displaystring read-only
The name of the real server group.
                         slbCurCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.9 integer read-only
The minimum number of real servers available. If at any time, the number reaches this minimum limit, a SYSLOG ALERT message is send to to the configured syslog servers stating that the real server threshold has been reached for the concerned group.
                         slbCurCfgGroupVipHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.10 integer read-only
Enable or disable VIP health checking in DSR mode. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgGroupIdsState 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.11 integer read-only
Enable or disable intrusion detection. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgGroupIdsPort 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.12 integer read-only
The intrusion detection port. A value of 1 is invalid.
                         slbCurCfgGroupIdsFlood 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.13 integer read-only
Enable or disable intrusion detection group flood. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgGroupMinmissHash 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.14 integer read-only
24|32 number of ip bits used for minmisses hash in the current_configuration block. Enumeration: 'minmiss-32': 2, 'minmiss-24': 1.
                         slbCurCfgGroupPhashMask 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.15 ipaddress read-only
IP address mask used by the persistent hash metric.
                         slbCurCfgGroupRmetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.16 integer read-only
The metric used to select next rport in server. Enumeration: 'roundRobin': 1, 'hash': 2, 'leastConnections': 3.
                         slbCurCfgGroupHealthCheckFormula 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.17 displaystring read-only
The formula used to state the actual health of a virtual service. It allows user to use the symbols of '(', ')', '|', '&' to construct a formula to state the health of the server group. This string can take the following formats : '(1&2|3..)', '128' or 'none' Example: Consider a group with 4 reals 1, 2, 3, 4. An example of a formuala to mark the server group failed for the virtual server if 1 and 2 FAILED or 3 and 4 FAILED is (1|2)&(3|4) This formula will mark the virtual server UP, if 1 or 2 and 3 or 4 are health checked sucessfully.
                         slbCurCfgGroupOperatorAccess 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.18 integer read-only
Enable or disable access to this group for operator. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgGroupWlm 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.19 integer32 read-only
The Workload Manager for this Group.
                         slbCurCfgGroupRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.20 displaystring read-only
The group RADIUS authentication string. The string is used for generating encrypted authentication string while doing RADIUS health check for this group radius servers.
                         slbCurCfgGroupSecBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.21 integer32 read-only
The Secondary backup real server group for this group.
                         slbCurCfgGroupSlowstart 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.22 integer32 read-only
The slow-start time for this group.
                         slbCurCfgGroupMinThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.23 integer32 read-only
The minimum threshold value for this group.
                         slbCurCfgGroupMaxThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.24 integer32 read-only
The maximum threshold value for this group.
                         slbCurCfgGroupIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.25 integer read-only
The type of real server group IP address. Enumeration: 'mixed': 3, 'ipv4': 1, 'ipv6': 2.
                         slbCurCfgGroupBackup 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.26 displaystring read-only
The backup real group or real server for this group.
                 slbNewCfgGroupTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.4 no-access
The table of groups
                     slbNewCfgGroupEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1 no-access
A row in the slbNewCfgGroupTable
                         slbNewCfgGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.1 integer32 read-only
The group number for which the information pertains.
                         slbNewCfgGroupRealServers 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.2 octet string read-only
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
                         slbNewCfgGroupAddServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.3 integer32 read-only
The real server to be added to the group. When read, 0 is returned.
                         slbNewCfgGroupRemoveServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.4 integer32 read-only
The real server to be removed from the group. When read, 0 is returned.
                         slbNewCfgGroupMetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.5 integer read-only
The metric used to select next server in group. Enumeration: 'svcLeast': 8, 'hash': 4, 'leastConnections': 2, 'minMisses': 3, 'bandwidth': 6, 'phash': 7, 'roundRobin': 1, 'response': 5.
                         slbNewCfgGroupBackupServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.6 integer32 read-only
The backup real server for this group.
                         slbNewCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.7 integer32 read-only
The backup real server group for this group.
                         slbNewCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.8 displaystring read-only
The specific content which is examined during health checks. The content depends on the type of health check.
                         slbNewCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.9 integer read-only
The OSI layer at which servers are health checked. Enumeration: 'tcp': 2, 'wtls': 30, 'radiusacs': 39, 'ldap': 31, 'rtsp': 42, 'sipping': 43, 'pop3': 6, 'httphead': 44, 'script44': 143, 'script41': 140, 'wsp': 29, 'script58': 157, 'script59': 158, 'script52': 151, 'script53': 152, 'script50': 149, 'script51': 150, 'script56': 155, 'script57': 156, 'script54': 153, 'script55': 154, 'arp': 33, 'script39': 138, 'script30': 129, 'script31': 130, 'script32': 131, 'script33': 132, 'script34': 133, 'script35': 134, 'script36': 135, 'script37': 136, 'script28': 127, 'radius': 10, 'script63': 162, 'ftp': 8, 'radiusaa': 48, 'script49': 148, 'script48': 147, 'script45': 144, 'dhcp': 47, 'script47': 146, 'script46': 145, 'nntp': 7, 'script40': 139, 'script43': 142, 'script42': 141, 'wtp': 41, 'script29': 128, 'wts': 46, 'script23': 122, 'script22': 121, 'script21': 120, 'script20': 119, 'script27': 126, 'script26': 125, 'script25': 124, 'script24': 123, 'udpdns': 32, 'tftp': 40, 'script38': 137, 'script18': 117, 'script19': 118, 'script16': 27, 'script17': 116, 'script14': 25, 'script15': 26, 'script12': 23, 'script13': 24, 'script10': 21, 'script11': 22, 'sslh': 11, 'dns': 4, 'sslv3': 49, 'snmp5': 38, 'snmp4': 37, 'snmp1': 34, 'snmp3': 36, 'snmp2': 35, 'link': 28, 'icmp': 1, 'imap': 9, 'sipoptions': 45, 'smtp': 5, 'script4': 15, 'script5': 16, 'script6': 17, 'script7': 18, 'script1': 12, 'script2': 13, 'script3': 14, 'script8': 19, 'script9': 20, 'script64': 163, 'http': 3, 'script62': 161, 'script61': 160, 'script60': 159.
                         slbNewCfgGroupName 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.10 displaystring read-only
The name of the real server group.
                         slbNewCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.11 integer read-only
The minimum number of real servers available. If at any time, the number reaches this minimum limit, a SYSLOG ALERT message is send to to the configured syslog servers stating that the real server threshold has been reached for the concerned group.
                         slbNewCfgGroupVipHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.12 integer read-only
Enable or disable VIP health checking in DSR mode. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgGroupIdsState 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.13 integer read-only
Enable or disable intrusion detection. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgGroupIdsPort 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.14 integer read-only
The intrusion detection port. A value of 1 is invalid.
                         slbNewCfgGroupDelete 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.15 integer read-only
By setting the value to delete(2), the entire group is deleted. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgGroupIdsFlood 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.16 integer read-only
Enable or disable intrusion detection group flood. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgGroupMinmissHash 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.17 integer read-only
24|32 number of sip bits used for minmisses hash in the new_configuration block. Enumeration: 'minmiss-32': 2, 'minmiss-24': 1.
                         slbNewCfgGroupPhashMask 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.18 ipaddress read-only
IP address mask used by the persistent hash metric.
                         slbNewCfgGroupRmetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.19 integer read-only
The metric used to select next rport in server. Enumeration: 'roundRobin': 1, 'hash': 2, 'leastConnections': 3.
                         slbNewCfgGroupHealthCheckFormula 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.20 displaystring read-only
The formula used to state the actual health of a virtual service. It allows user to use the symbols of '(', ')', '|', '&' to construct a formula to state the health of the server group. This string can take the following formats : '(1&2|3..)', '128' or 'none' Example: Consider a group with 4 reals 1, 2, 3, 4. An example of a formuala to mark the server group failed for the virtual server if 1 and 2 FAILED or 3 and 4 FAILED is (1|2)&(3|4) This formula will mark the virtual server UP, if 1 or 2 and 3 or 4 are health checked sucessfully.
                         slbNewCfgGroupOperatorAccess 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.21 integer read-only
Enable or disable access to this group for operator. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgGroupWlm 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.22 integer32 read-only
The Workload Manager for this Group.
                         slbNewCfgGroupRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.23 displaystring read-write
The group RADIUS authentication string. The string is used for generating encrypted authentication string while doing RADIUS health check for this group radius servers.
                         slbNewCfgGroupSecBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.24 integer32 read-only
The Secondary backup real server group for this group.
                         slbNewCfgGroupSlowstart 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.25 integer32 read-only
The slow-start time for this group.
                         slbNewCfgGroupMinThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.26 integer32 read-only
The minimum threshold value for this group.
                         slbNewCfgGroupMaxThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.27 integer32 read-only
The maximum threshold value for this group.
                         slbNewCfgGroupIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.28 integer read-only
The type of real server group IP address. Enumeration: 'mixed': 3, 'ipv4': 1, 'ipv6': 2.
                         slbNewCfgGroupBackup 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.29 displaystring read-only
The backup real group or real server for this group.
                         slbNewCfgGroupBackupType 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.30 integer read-only
Backup type of the real server group. Enumeration: 'none': 1, 'group': 3, 'server': 2.
                 slbCurCfgGroupRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.5 no-access
The table of real servers per group.
                     slbCurCfgGroupRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1 no-access
A row in the Real server group table.
                         slbCurCfgRealServGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.1 integer32 read-only
The real server group index.
                         slbCurCfgGroupRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.2 integer32 read-only
The real server index.
                         slbCurCfgGroupRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.3 integer read-only
Enable/disable a real server gracefully on a per group basis. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgGroupRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.6 no-access
The table of real server per group.
                     slbNewCfgGroupRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1 no-access
A row in the Real server group table.
                         slbNewCfgRealServGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.1 integer32 read-only
The real server group index.
                         slbNewCfgGroupRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.2 integer32 read-only
The real server index.
                         slbNewCfgGroupRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.3 integer read-only
Enable/disable a real server gracefully on a per group basis. Enumeration: 'disabled': 2, 'enabled': 1.
             virtualServerCfg 1.3.6.1.4.1.1872.2.5.4.1.1.4
                 slbVirtServerTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.1 integer32 read-only
The maximum number of entries in SLB VirtServerTable.
                 slbCurCfgVirtServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.2 no-access
The table of virtual Servers.
                     slbCurCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1 no-access
A row in the virtual server table.
                         slbCurCfgVirtServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.1 integer32 read-only
Virtual Server Number
                         slbCurCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.2 ipaddress read-only
IP address of the virtual server.
                         slbCurCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.3 integer read-only
Enable or disable layer3 only balancing. Enumeration: 'disabled': 2, 'layer3Only': 1.
                         slbCurCfgVirtServerState 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.4 integer read-only
Enable or disable the virtual server. Enumeration: 'disabled': 3, 'enabled': 2.
                         slbCurCfgVirtServerDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.5 displaystring read-only
The domain name of the virtual server.
                         slbCurCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.6 integer32 read-only
The default BW contract of virtual server.
                         slbCurCfgVirtServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.7 integer read-only
The virtual server Global SLB weight.
                         slbCurCfgVirtServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.8 integer read-only
The virtual server Global SLB availability.
                         slbCurCfgVirtServerRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.9 octet string read-only
The Global SLB rules for the domain. The rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented rule belongs to the domain 0 - The represented rule does not belong to the domain
                         slbCurCfgVirtServerVname 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.10 displaystring read-only
The name of the virtual server.
                         slbCurCfgVirtServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.11 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         slbCurCfgVirtServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.12 displaystring read-only
The IPv6 address of the virtual server. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         slbCurCfgVirtServerCReset 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.13 integer read-only
Enable/disable client connection reset for invalid VPORT. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgVirtServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.3 no-access
The table of virtual Servers.
                     slbNewCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1 no-access
A row in the virtual server table.
                         slbNewCfgVirtServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.1 integer32 read-only
The Virtual Server Number
                         slbNewCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.2 ipaddress read-only
IP address of the virtual server.
                         slbNewCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.3 integer read-only
Enable or disable layer3 only balancing. Enumeration: 'disabled': 2, 'layer3Only': 1.
                         slbNewCfgVirtServerState 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.4 integer read-only
Enable or disable the virtual server. Enumeration: 'disabled': 3, 'enabled': 2.
                         slbNewCfgVirtServerDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.6 displaystring read-only
The domain name of the virtual server.
                         slbNewCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.7 integer32 read-only
The default BW contract number of the virtual server.
                         slbNewCfgVirtServerDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.8 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgVirtServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.9 integer read-only
The virtual server Global SLB weight.
                         slbNewCfgVirtServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.10 integer read-only
The virtual server Global SLB availability.
                         slbNewCfgVirtServerRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.11 octet string read-only
The Global SLB rules for the domain. The rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented rule belongs to the domain 0 - The represented rule does not belong to the domain
                         slbNewCfgVirtServerAddRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.12 integer32 read-only
The rule to be added to the domain. When read, 0 is returned.
                         slbNewCfgVirtServerRemoveRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.13 integer32 read-only
The rule to be removed from the domain. When read, 0 is returned.
                         slbNewCfgVirtServerVname 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.14 displaystring read-only
The name of the virtual server.
                         slbNewCfgVirtServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.15 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         slbNewCfgVirtServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.16 displaystring read-only
The IPv6 address of the virtual server. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         slbNewCfgVirtServerFreeServiceIdx 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.17 integer read-only
The first free service index number of the virtual server. Value 0 will be returned when all 8 virtual services are configured for a virtual server.
                         slbNewCfgVirtServerCReset 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.18 integer read-only
Enable/disable client connection reset for invalid VPORT. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbVirtServicesTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.4 integer32 read-only
The maximum number of entries in SLB Virtual Services Table.
                 slbCurCfgVirtServicesTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.5 no-access
The table of virtual services.
                     slbCurCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1 no-access
A row in the virtual services table.
                         slbCurCfgVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.1 integer32 read-only
The number of the virtual server.
                         slbCurCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.2 integer32 read-only
The service index. This has no external meaning
                         slbCurCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.3 integer read-only
The layer4 virtual port number of the service.
                         slbCurCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.4 integer32 read-only
The real server group number for this service.
                         slbCurCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.5 integer read-only
The layer4 real port number of the service.
                         slbCurCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.6 integer read-only
Enable, disable or stateless the UDP balancing for the virtual port. Enumeration: 'disabled': 3, 'stateless': 4, 'enabled': 2.
                         slbCurCfgVirtServiceHname 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.7 displaystring read-only
The host name of the virtual service.
                         slbCurCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.8 integer32 read-only
The BWM contract number for this service.
                         slbCurCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.9 integer read-only
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceRtspUrlParse 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.10 integer read-only
Select RTSP URL load balancing type. Enumeration: 'none': 1, 'hash': 3, 'patternMatch': 4, 'l4hash': 2.
                         slbCurCfgVirtServiceDBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.11 integer read-only
Enable/disable/forceproxy delayed binding. Enumeration: 'disabled': 2, 'enabled': 1, 'forceproxy': 3.
                         slbCurCfgVirtServiceFtpParsing 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.12 integer read-only
Enable or Disable the ftp parsing for the virtual service. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceRemapUDPFrags 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.13 integer read-only
Enable or disable remapping UDP server fragments Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceDnsSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.14 integer read-only
Enable or disable DNS query load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceResponseCount 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.15 integer read-only
The number of cookie search response count.
                         slbCurCfgVirtServicePBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.16 integer read-only
Enable or disable persistent bindings for the virtual port. Enumeration: 'disabled': 3, 'cookie': 5, 'clientip': 2, 'sslid': 4.
                         slbCurCfgVirtServiceCname 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.17 displaystring read-only
The cookie name of the virtual server used for cookie load balance.
                         slbCurCfgVirtServiceCoffset 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.18 integer read-only
The starting byte offset of the cookie value.
                         slbCurCfgVirtServiceClength 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.19 integer read-only
The number of bytes to extract from the cookie value.
                         slbCurCfgVirtServiceUriCookie 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.20 integer read-only
Enable or disable cookie search in URI Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceCExpire 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.21 displaystring read-only
The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format absolute mode or for relative mode.
                         slbCurCfgVirtServiceCookieMode 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.22 integer read-only
Select cookie persistence mode. Enumeration: 'passive': 2, 'insert': 3, 'disabled': 4, 'rewrite': 1.
                         slbCurCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.23 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'headerhash': 8, 'urlslb': 2, 'disabled': 1, 'host': 5, 'version': 9, 'cookie': 4, 'others': 7, 'urlhash': 3, 'browser': 6.
                         slbCurCfgVirtServiceHttpSlbOption 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.24 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'and': 1, 'none': 3, 'or': 2.
                         slbCurCfgVirtServiceHttpSlb2 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.25 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'headerhash': 8, 'urlslb': 2, 'disabled': 1, 'host': 5, 'version': 9, 'cookie': 4, 'others': 7, 'urlhash': 3, 'browser': 6.
                         slbCurCfgVirtServiceHttpHdrName 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.26 displaystring read-only
The HTTP header name of the virtual server.
                         slbCurCfgVirtServiceUrlHashLen 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.27 integer read-only
The number of bytes used to hash onto server, A zero means URL hashing disabled.
                         slbCurCfgVirtServiceDirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.28 integer read-only
Enable or disable DAM for this service. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceThash 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.29 integer read-only
Set hash parameter. Enumeration: 'sip': 1, 'sip-sport': 2.
                         slbCurCfgVirtServiceLdapreset 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.30 integer read-only
Enable or disable LDAP Server Reset Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceLdapslb 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.31 integer read-only
Enable or disable LDAP Server load balancing Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceSip 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.32 integer read-only
Enable/disable SIP load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceXForwardedFor 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.33 integer read-only
Enable/disable X-Forwarded-For for proxy mode. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.34 integer read-only
Enable/disable HTTP/HTTPS redirect for GSLB. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServicePbindRport 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.35 integer read-only
Enable or disable use of rport in the session lookup for a persistent session. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceEgressPip 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.36 integer read-only
Enable/disable pip selection based on egress port/vlan. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceCookieDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.37 integer read-only
Select dname for insert cookie persistence mode. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceWts 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.38 integer read-only
Enable or disable WTS loadbalancing and persistence. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceUhash 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.39 integer read-only
Enable when there is no Session Directory server. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.40 integer read-only
The maximum number of minutes an inactive connection remains open.
                         slbCurCfgVirtServiceSdpNat 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.41 integer read-only
Enable/disable SIP Media portal NAT. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.42 integer read-only
Enable/disable session mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceSoftGrid 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.43 integer read-only
Enable/disable softgrid load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtServiceConnPooling 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.44 integer read-only
Enable/disable connection pooling for HTTP traffic. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgVirtPersistentTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.45 integer read-only
The maximum number of minutes a persistent session should exist.
                 slbNewCfgVirtServicesTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.6 no-access
The table of virtual Services.
                     slbNewCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1 no-access
A row in the virtual services table.
                         slbNewCfgVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.1 integer32 read-only
The number of the virtual server.
                         slbNewCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.2 integer32 read-only
The service index. This has no external meaning
                         slbNewCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.3 integer read-only
The layer4 virtual port number of the service.
                         slbNewCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.4 integer32 read-only
The real server group number for this service.
                         slbNewCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.5 integer read-only
The layer4 real port number of the service.
                         slbNewCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.6 integer read-only
Enable, disable or stateless the UDP balancing for the virtual port. Enumeration: 'disabled': 3, 'stateless': 4, 'enabled': 2.
                         slbNewCfgVirtServiceHname 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.7 displaystring read-only
The host name of the virtual service.
                         slbNewCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.8 integer32 read-only
The BWM contract number for this service.
                         slbNewCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.9 integer read-only
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceRtspUrlParse 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.10 integer read-only
Select RTSP URL load balancing type. Enumeration: 'none': 1, 'hash': 3, 'patternMatch': 4, 'l4hash': 2.
                         slbNewCfgVirtServiceDBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.11 integer read-only
Enable/disable/forceproxy delayed binding. Enumeration: 'disabled': 2, 'enabled': 1, 'forceproxy': 3.
                         slbNewCfgVirtServiceFtpParsing 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.12 integer read-only
Enable or Disable the ftp parsing for the virtual service. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceRemapUDPFrags 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.13 integer read-only
Enable or disable remapping UDP server fragments Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceDnsSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.14 integer read-only
Enable or disable DNS query load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceResponseCount 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.15 integer read-only
The number of cookie search response count.
                         slbNewCfgVirtServicePBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.16 integer read-only
Enable or disable persistent bindings for the virtual port. Enumeration: 'disabled': 3, 'cookie': 5, 'clientip': 2, 'sslid': 4.
                         slbNewCfgVirtServiceCname 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.17 displaystring read-only
The cookie name of the virtual server used for cookie load balance.
                         slbNewCfgVirtServiceCoffset 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.18 integer read-only
The starting byte offset of the cookie value.
                         slbNewCfgVirtServiceClength 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.19 integer read-only
The number of bytes to extract from the cookie value.
                         slbNewCfgVirtServiceUriCookie 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.20 integer read-only
Enable or disable cookie search in URI Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceCExpire 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.21 displaystring read-only
The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format absolute mode or for relative mode.
                         slbNewCfgVirtServiceCookieMode 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.22 integer read-only
Select cookie persistence mode. Enumeration: 'passive': 2, 'insert': 3, 'rewrite': 1.
                         slbNewCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.23 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'headerhash': 8, 'urlslb': 2, 'disabled': 1, 'host': 5, 'version': 9, 'cookie': 4, 'others': 7, 'urlhash': 3, 'browser': 6.
                         slbNewCfgVirtServiceHttpSlbOption 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.24 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'and': 1, 'none': 3, 'or': 2.
                         slbNewCfgVirtServiceHttpSlb2 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.25 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'headerhash': 8, 'urlslb': 2, 'disabled': 1, 'host': 5, 'version': 9, 'cookie': 4, 'others': 7, 'urlhash': 3, 'browser': 6.
                         slbNewCfgVirtServiceHttpHdrName 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.26 displaystring read-only
The HTTP header name of the virtual server.
                         slbNewCfgVirtServiceUrlHashLen 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.27 integer read-only
The number of bytes used to hash onto server, A zero means URL hashing disabled.
                         slbNewCfgVirtServiceDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.28 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgVirtServiceDirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.29 integer read-only
Enable or disable DAM for this service. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceThash 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.30 integer read-only
Set hash parameter. Enumeration: 'sip': 1, 'sip-sport': 2.
                         slbNewCfgVirtServiceLdapreset 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.31 integer read-only
Enable or disable LDAP Server Reset Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceLdapslb 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.32 integer read-only
Enable or disable LDAP Server load balancing Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceSip 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.33 integer read-only
Enable/disable SIP load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceXForwardedFor 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.34 integer read-only
Enable/disable X-Forwarded-For for proxy mode. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.35 integer read-only
Enable/disable HTTP/HTTPS redirect for GSLB. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServicePbindRport 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.36 integer read-only
Enable or disable use of rport in the session lookup for a persistent session. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceEgressPip 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.37 integer read-only
Enable/disable pip selection based on egress port/vlan. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceCookieDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.38 integer read-only
Select dname for insert cookie persistence mode. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceWts 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.39 integer read-only
Enable or disable WTS loadbalancing and persistence. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceUhash 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.40 integer read-only
Enable when there is no Session Directory server. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.41 integer read-only
The maximum number of minutes an inactive connection remains open.
                         slbNewCfgVirtServiceSdpNat 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.42 integer read-only
Enable/disable SIP Media portal NAT. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.43 integer read-only
Enable/disable session mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceSoftGrid 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.44 integer read-only
Enable/disable softgrid load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtServiceConnPooling 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.45 integer read-only
Enable/disable connection pooling for HTTP traffic. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgVirtPersistentTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.46 integer read-only
The maximum number of minutes a persistent session should exist.
                 slbUrlBwmTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.7 integer32 read-only
The maximum number of entries in SLB URL BWM Table.
                 slbCurCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.8 no-access
The table of URL based BWM for Virtual Services.
                     slbCurCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1 no-access
A row in the URL based BWM virtual services table.
                         slbCurCfgUrlBwmVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.1 integer32 read-only
The number of the virtual server.
                         slbCurCfgUrlBwmVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.2 integer32 read-only
The service index. This has no external meaning
                         slbCurCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.3 integer32 read-only
The URL Path Identifier.
                         slbCurCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.4 integer32 read-only
The BW contract number.
                 slbNewCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.9 no-access
The table of URL based BWM for Virtual Services.
                     slbNewCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1 no-access
A row in the URL based BWM virtual services table.
                         slbNewCfgUrlBwmVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.1 integer32 read-only
The number of the virtual server.
                         slbNewCfgUrlBwmVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.2 integer32 read-only
The service index. This has no external meaning
                         slbNewCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.3 integer32 read-only
The URL Path Identifier.
                         slbNewCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.4 integer32 read-only
The BW contract number.
                         slbNewCfgUrlBwmDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.5 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                 slbCurCfgContRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.10 no-access
The table of Content based Services Rules.
                       slbCurCfgContRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1 no-access
A row in the Content Based Services Rules table.
                           slbCurCfgContVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.1 integer32 read-only
The number of the virtual server.
                           slbCurCfgContVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.2 integer32 read-only
The service index. This has no external meaning
                           slbCurCfgContRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.3 integer32 read-only
The content based service rule index.
                           slbCurCfgContRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.4 displaystring read-only
The Content Rule Name.
                           slbCurCfgContRuleContClass 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.5 displaystring read-only
The Content Class for the rule.
                           slbCurCfgContRuleAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.6 integer read-only
Action type of the rule. Enumeration: 'discard': 3, 'appredir': 2, 'group': 1, 'goto': 4.
                           slbCurCfgContRuleRealGrpNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.7 integer read-only
The group number of real server.
                           slbCurCfgContRuleGotoRuleNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.8 integer read-only
The group number of real server.
                           slbCurCfgContRuleRedirection 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.9 displaystring read-only
Application redirection for the rule.
                           slbCurCfgContRuleState 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.10 integer read-only
Enable or disable Content Based Services Rule . Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgContRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.11 no-access
The table of Content based Services Rules.
                       slbNewCfgContRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1 no-access
A row in the Content Based Services Rules table.
                           slbNewCfgContVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.1 integer32 read-only
The number of the virtual server.
                           slbNewCfgContVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.2 integer32 read-only
The service index. This has no external meaning
                           slbNewCfgContRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.3 integer32 read-only
The content based service index.
                           slbNewCfgContRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.4 displaystring read-only
The Content Rule Name.
                           slbNewCfgContRuleContClass 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.5 displaystring read-only
The Content Class for the rule.
                           slbNewCfgContRuleAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.6 integer read-only
Action type of the rule. Enumeration: 'discard': 3, 'appredir': 2, 'group': 1, 'goto': 4.
                           slbNewCfgContRuleRealGrpNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.7 integer read-only
The group number of real server.
                           slbNewCfgContRuleGotoRuleNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.8 integer read-only
The group number of real server.
                           slbNewCfgContRuleRedirection 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.9 displaystring read-only
Application redirection for the rule.
                           slbNewCfgContRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.10 integer read-only
The Number to which current rule is to be copied.
                           slbNewCfgContRuleState 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.11 integer read-only
Enable or disable Content Based Services Rule . Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgContRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.12 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                 slbCurCfgVirtServicesSecondPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.12 no-access
The table of virtual Services.
                       slbCurCfgVirtServicesSecondPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1 no-access
A row in the virtual services table.
                           slbCurCfgVirtServSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.1 integer32 read-only
The number of the virtual server.
                           slbCurCfgVirtServiceSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.2 integer32 read-only
The service index. This has no external meaning
                           slbCurCfgVirtServiceConnmgtStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.3 integer read-only
Connection management configuration for HTTP traffic(Enable/disable/pooling) [Default: Disable]. Enumeration: 'disabled': 0, 'pooling': 1, 'muxenabled': 2.
                           slbCurCfgVirtServiceConnmgtTimeout 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.4 integer read-only
Connection management server side connection idle timeout in minutes [0-32768] [Default: 10].
                           slbCurCfgVirtServiceCachepol 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.5 displaystring read-only
Cache policy name associated with this virtual service.
                           slbCurCfgVirtServiceComppol 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.6 displaystring read-only
Compression policy name associated with this virtual service.
                           slbCurCfgVirtServiceSSLpol 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.7 displaystring read-only
SSL policy name associated with this virtual service.
                           slbCurCfgVirtServiceServCert 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.8 displaystring read-only
Server Certificate name associated with this virtual service.
                           slbCurCfgVirtServiceHttpmodList 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.9 displaystring read-only
HTTP Content Modifications Rule-list associated with this virtual service.
                           slbCurCfgVirtServiceCloaksrv 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.10 integer read-only
Enable/disable server cloaking. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbCurCfgVirtServErrcodeStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.11 integer read-only
Enable/disable/clear error-code configuration. Enumeration: 'disabled': 2, 'clear': 3, 'enabled': 1.
                           slbCurCfgVirtServErrcodeMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.12 displaystring read-only
Match error-code(s), e.g 203,204 .
                           slbCurCfgVirtServErrcodeHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.13 integer read-only
Use http redirection [yes/no] [Default: yes]. Enumeration: 'yes': 1, 'no': 2.
                           slbCurCfgVirtServErrcodeUrl 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.14 displaystring read-only
URL for redirection.
                           slbCurCfgVirtServErrcode 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.15 displaystring read-only
Set error code [Default: 302].
                           slbCurCfgVirtServErrcodeNew 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.16 displaystring read-only
Enter Cur error code [Default: 302].
                           slbCurCfgVirtServErrcodeReason 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.17 displaystring read-only
Enter error reason.
                           slbCurCfgVirtServUrlchangStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.18 integer read-only
Enter enabled/disabled/clear [Default: clear]. Enumeration: 'clear': 3, 'enable': 1, 'disable': 2.
                           slbCurCfgVirtServUrlchangHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.19 integer read-only
Enter hostname match type [sufx|prefx|eq|incl|any] [Default: any] Enumeration: 'prefx': 2, 'incl': 4, 'sufx': 1, 'eq': 3, 'any': 5.
                 slbCurCfgVirtServicesThirdPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.13 no-access
The table of virtual Services.
                       slbCurCfgVirtServicesThirdPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1 no-access
A row in the virtual services table.
                           slbCurCfgVirtServThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.1 integer32 read-only
The number of the virtual server.
                           slbCurCfgVirtServiceThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.2 integer32 read-only
The service index. This has no external meaning
                           slbCurCfgVirtServUrlchangHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.3 displaystring read-only
Enter hostname to match.
                           slbCurCfgVirtServUrlchangPathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.4 integer read-only
Enter path match type [sufx|prefx|eq|incl|any]. Enumeration: 'none': 6, 'eq': 3, 'prefx': 2, 'sufx': 1, 'incl': 4, 'any': 5.
                           slbCurCfgVirtServUrlchangPathMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.5 displaystring read-only
Enter path to match.
                           slbCurCfgVirtServUrlchangPageName 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.6 displaystring read-only
Enter page name to match or none.
                           slbCurCfgVirtServUrlchangPageType 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.7 displaystring read-only
Enter page type to match or none.
                           slbCurCfgVirtServUrlchangActnType 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.8 integer read-only
Enter path action type. Enumeration: 'insert': 1, 'none': 4, 'remove': 3, 'replace': 2.
                           slbCurCfgVirtServUrlchangPathInsrt 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.9 displaystring read-only
Enter path to insert.
                           slbCurCfgVirtServUrlchangInsrtPostn 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.10 integer read-only
Insert the specified path before or after the matched section? Enumeration: 'after': 2, 'before': 1.
                 slbCurCfgVirtServicesFourthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.14 no-access
The table of virtual Services.
                       slbCurCfgVirtServicesFourthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1 no-access
A row in the virtual services table.
                           slbCurCfgVirtServFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.1 integer32 read-only
The number of the virtual server.
                           slbCurCfgVirtServiceFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.2 integer32 read-only
The service index. This has no external meaning
                           slbCurCfgVirtServUrlchangNewPgName 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.3 displaystring read-only
Enter Cur page name or none.
                           slbCurCfgVirtServUrlchangNewPgType 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.4 displaystring read-only
Enter Cur page type or none.
                           slbCurCfgVirtServPathHideStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.5 integer read-only
Enter enabled/disabled/clear [Default: clear]. Enumeration: 'clear': 3, 'enable': 1, 'disable': 2.
                           slbCurCfgVirtServPathHideHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.6 integer read-only
Enter hostname type [sufx|prefx|eq|incl|any] [Default: any]. Enumeration: 'prefx': 2, 'incl': 4, 'sufx': 1, 'eq': 3, 'any': 5.
                           slbCurCfgVirtServPathHideHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.7 displaystring read-only
Enter hostname to match.
                           slbCurCfgVirtServPathHidePathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.8 integer read-only
Enter path match type [sufx|prefx|eq|none]. Enumeration: 'prefx': 2, 'sufx': 1, 'eq': 3, 'none': 4.
                           slbCurCfgVirtServPathHidePathName 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.9 displaystring read-only
Enter path to remove.
                           slbCurCfgVirtServTextrepStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.10 integer read-only
Enter enabled/disabled/clear [Default: clear]. Enumeration: 'clear': 3, 'enable': 1, 'disable': 2.
                           slbCurCfgVirtServTextrepAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.11 integer read-only
Enter action [replace|remove|none]. Enumeration: 'none': 0, 'remove': 2, 'replace': 1.
                 slbCurCfgVirtServicesFifthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.15 no-access
The table of virtual Services.
                       slbCurCfgVirtServicesFifthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1 no-access
A row in the virtual services table.
                           slbCurCfgVirtServFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.1 integer32 read-only
The number of the virtual server.
                           slbCurCfgVirtServiceFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.2 integer32 read-only
The service index. This has no external meaning
                           slbCurCfgVirtServTextrepMatchText 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.3 displaystring read-only
Enter text to be replaced.
                           slbCurCfgVirtServTextrepReplacTxt 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.4 displaystring read-only
Enter Cur text/ text to remove.
                           slbCurCfgVirtServApplicationType 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.5 integer read-only
Application Type for virtual service. Enumeration: 'ftp': 3, 'sip': 10, 'http': 6, 'https': 7, 'wts': 11, 'rtsp': 9, 'ssl': 8, 'ftp-data': 4, 'basic-slb': 1, 'dns': 2, 'ldap': 5, 'tftp': 12.
                           slbCurCfgVirtServiceName 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.6 displaystring read-only
The name of the virtual service.
                           slbCurCfgVirtServiceAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.7 integer read-only
Action type of the service.If we set value as group(1) it will Load balance the traffic between the servers defined in the group field after performing all other services actions.when set to a value of redirect(2) for http/https services, an http/s redirection will be performed with the values set in the application redirection.If we set value as discard(3) it will drop the session. Enumeration: 'redirect': 2, 'discard': 3, 'group': 1.
                           slbCurCfgVirtServiceRedirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.8 displaystring read-only
application redirection location.We need to provide this value When action type is set to redirect(2).
                           slbCurCfgVirtServiceServCertGrpMark 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.9 integer read-only
Group Mark for Server Certificate. If we set value as cert(0) It will denote that the server certificate (name) associated with this virtual service, represents a certificate. Otherwise, a value of group(1), denotes that the server certificate (name) represents a group. Enumeration: 'cert': 1, 'group': 2.
                           slbCurCfgVirtServiceDnsType 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.10 integer read-only
Set DNS type for this service (DNS, DNSSEC). Enumeration: 'both': 3, 'dnssec': 2, 'dns': 1.
                           slbCurCfgVirtServiceClntproxType 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.11 integer read-only
Set client proximity type for this service. Enumeration: 'none': 1, 'http': 2, 'https': 3.
                           slbCurCfgVirtServiceZerowinSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.12 integer read-only
Enable or disable zero window size in SYN+ACK for this service. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbCurCfgVirtServiceCookiePath 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.13 displaystring read-only
The cookie path name of the virtual server used for cookie load balance.
                           slbCurCfgVirtServiceCookieSecure 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.14 integer read-only
Is cookie secure [yes/no] [Default: no]. Enumeration: 'yes': 2, 'no': 1.
                           slbCurCfgVirtServiceNoRtsp 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.15 integer read-only
Enable or disable only rtsp SLB for this service. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbCurCfgVirtServiceCkRebind 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.16 integer read-only
Server rebalancing when cookie is absent. When enabled, server load balancing will happen for subsequent request comes without cookie. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbCurCfgVirtServiceParseLimit 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.17 integer read-only
Enable or disable buffer limit for content based selection. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbCurCfgVirtServiceParseLength 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.18 integer read-only
The buffer length for content based selection.
                           slbCurCfgVirtServiceUriNorm 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.19 integer read-only
Enable or disable URI normalization for HTTP content matching. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgVirtServicesSecondPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.16 no-access
The table of virtual Services.
                       slbNewCfgVirtServicesSecondPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1 no-access
A row in the virtual services table.
                           slbNewCfgVirtServSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.1 integer32 read-only
The number of the virtual server.
                           slbNewCfgVirtServiceSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.2 integer32 read-only
The service index. This has no external meaning
                           slbNewCfgVirtServiceConnmgtStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.3 integer read-only
Connection management configuration for HTTP traffic(Enable/disable/pooling) [Default: Disable]. Enumeration: 'disabled': 0, 'pooling': 1, 'muxenabled': 2.
                           slbNewCfgVirtServiceConnmgtTimeout 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.4 integer read-only
Connection management server side connection idle timeout in minutes [0-32768] [Default: 10].
                           slbNewCfgVirtServiceCachepol 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.5 displaystring read-only
Cache policy name associated with this virtual service.Set none to delete entry
                           slbNewCfgVirtServiceComppol 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.6 displaystring read-only
Compression policy name associated with this virtual service.Set none to delete entry
                           slbNewCfgVirtServiceSSLpol 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.7 displaystring read-only
SSL policy name associated with this virtual service.Set none to delete entry
                           slbNewCfgVirtServiceServCert 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.8 displaystring read-only
Server Certificate name associated with this virtual service.
                           slbNewCfgVirtServiceHttpmodList 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.9 displaystring read-only
HTTP Content Modifications Rule-list associated with this virtual service.Set none to delete entry
                           slbNewCfgVirtServiceCloaksrv 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.10 integer read-only
Enable/disable server cloaking. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgVirtServErrcodeStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.11 integer read-only
Enable/disable/clear error-code configuration. Enumeration: 'disabled': 2, 'clear': 3, 'enabled': 1.
                           slbNewCfgVirtServErrcodeMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.12 displaystring read-only
Match error-code(s), e.g 203,204 .
                           slbNewCfgVirtServErrcodeHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.13 integer read-only
Use http redirection [yes/no] [Default: yes]. Enumeration: 'yes': 1, 'no': 2.
                           slbNewCfgVirtServErrcodeUrl 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.14 displaystring read-only
URL for redirection.
                           slbNewCfgVirtServErrcode 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.15 displaystring read-only
set error code [Default: 302].
                           slbNewCfgVirtServErrcodeNew 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.16 displaystring read-only
Enter new error code [Default: 302].
                           slbNewCfgVirtServErrcodeReason 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.17 displaystring read-only
Enter error reason.
                           slbNewCfgVirtServUrlchangStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.18 integer read-only
Enter enabled/disabled/clear [Default: clear]. Enumeration: 'clear': 3, 'enable': 1, 'disable': 2.
                           slbNewCfgVirtServUrlchangHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.19 integer read-only
Enter hostname match type [sufx|prefx|eq|incl|any] [Default: any] Enumeration: 'prefx': 2, 'incl': 4, 'sufx': 1, 'eq': 3, 'any': 5.
                 slbNewCfgVirtServicesThirdPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.17 no-access
The table of virtual Services.
                       slbNewCfgVirtServicesThirdPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1 no-access
A row in the virtual services table.
                           slbNewCfgVirtServThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.1 integer32 read-only
The number of the virtual server.
                           slbNewCfgVirtServiceThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.2 integer32 read-only
The service index. This has no external meaning
                           slbNewCfgVirtServUrlchangHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.3 displaystring read-only
Enter hostname to match.
                           slbNewCfgVirtServUrlchangPathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.4 integer read-only
Enter path match type [sufx|prefx|eq|incl|any|none]. Enumeration: 'none': 6, 'eq': 3, 'prefx': 2, 'sufx': 1, 'incl': 4, 'any': 5.
                           slbNewCfgVirtServUrlchangPathMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.5 displaystring read-only
Enter path to match.
                           slbNewCfgVirtServUrlchangPageName 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.6 displaystring read-only
Enter page name to match or none.
                           slbNewCfgVirtServUrlchangPageType 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.7 displaystring read-only
Enter page type to match or none.
                           slbNewCfgVirtServUrlchangActnType 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.8 integer read-only
Enter path action type. Enumeration: 'insert': 1, 'none': 4, 'remove': 3, 'replace': 2.
                           slbNewCfgVirtServUrlchangPathInsrt 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.9 displaystring read-only
Enter path to insert.
                           slbNewCfgVirtServUrlchangInsrtPostn 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.10 integer read-only
Insert the specified path before or after the matched section? Enumeration: 'after': 2, 'before': 1.
                 slbNewCfgVirtServicesFourthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.18 no-access
The table of virtual Services.
                       slbNewCfgVirtServicesFourthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1 no-access
A row in the virtual services table.
                           slbNewCfgVirtServFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.1 integer32 read-only
The number of the virtual server.
                           slbNewCfgVirtServiceFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.2 integer32 read-only
The service index. This has no external meaning
                           slbNewCfgVirtServUrlchangNewPgName 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.3 displaystring read-only
Enter new page name or none.
                           slbNewCfgVirtServUrlchangNewPgType 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.4 displaystring read-only
Enter new page type or none.
                           slbNewCfgVirtServPathHideStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.5 integer read-only
Enter enabled/disabled/clear [Default: clear]. Enumeration: 'clear': 3, 'enable': 1, 'disable': 2.
                           slbNewCfgVirtServPathHideHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.6 integer read-only
Enter hostname type [sufx|prefx|eq|incl|any] [Default: any]. Enumeration: 'prefx': 2, 'incl': 4, 'sufx': 1, 'eq': 3, 'any': 5.
                           slbNewCfgVirtServPathHideHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.7 displaystring read-only
Enter hostname to match.
                           slbNewCfgVirtServPathHidePathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.8 integer read-only
Enter path match type [sufx|prefx|eq|none]. Enumeration: 'prefx': 2, 'sufx': 1, 'eq': 3, 'none': 4.
                           slbNewCfgVirtServPathHidePathName 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.9 displaystring read-only
Enter path to remove.
                           slbNewCfgVirtServTextrepStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.10 integer read-only
Enter enabled/disabled/clear [Default: clear]. Enumeration: 'clear': 3, 'enable': 1, 'disable': 2.
                           slbNewCfgVirtServTextrepAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.11 integer read-only
Enter action [replace|remove|none]. Enumeration: 'none': 0, 'remove': 2, 'replace': 1.
                 slbNewCfgVirtServicesFifthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.19 no-access
The table of virtual Services.
                       slbNewCfgVirtServicesFifthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1 no-access
A row in the virtual services table.
                           slbNewCfgVirtServFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.1 integer32 read-only
The number of the virtual server.
                           slbNewCfgVirtServiceFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.2 integer32 read-only
The service index. This has no external meaning
                           slbNewCfgVirtServTextrepMatchText 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.3 displaystring read-only
Enter text to be replaced.
                           slbNewCfgVirtServTextrepReplacTxt 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.4 displaystring read-only
Enter new text/ text to remove.
                           slbNewCfgVirtServApplicationType 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.5 integer read-only
Application Type for virtual service. Enumeration: 'ftp': 3, 'sip': 10, 'http': 6, 'https': 7, 'wts': 11, 'rtsp': 9, 'ssl': 8, 'ftp-data': 4, 'basic-slb': 1, 'dns': 2, 'ldap': 5, 'tftp': 12.
                           slbNewCfgVirtServiceName 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.6 displaystring read-only
The name of the virtual service.
                           slbNewCfgVirtServiceAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.7 integer read-only
Action type of the service.If we set value as group(1) it will Load balance the traffic between the servers defined in the group field after performing all other services actions.when set to a value of redirect(2) for http/https services, an http/s redirection will be performed with the values set in the application redirection.If we set value as discard(3) it will drop the session. Enumeration: 'redirect': 2, 'discard': 3, 'group': 1.
                           slbNewCfgVirtServiceRedirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.8 displaystring read-only
application redirection location.We need to provide this value When action type is set to redirect(2).
                           slbNewCfgVirtServiceServCertGrpMark 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.9 integer read-only
Group Mark for Server Certificate. If we set value as cert(0) It will denote that the server certificate (name) associated with this virtual service, represents a certificate. Otherwise, a value of group(1), denotes that the server certificate (name) represents a group. Enumeration: 'cert': 1, 'group': 2.
                           slbNewCfgVirtServiceDnsType 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.10 integer read-only
Set DNS type for this service (DNS, DNSSEC). Enumeration: 'both': 3, 'dnssec': 2, 'dns': 1.
                           slbNewCfgVirtServiceClntproxType 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.11 integer read-only
Set client proximity type for this service. Enumeration: 'none': 1, 'http': 2, 'https': 3.
                           slbNewCfgVirtServiceZerowinSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.12 integer read-only
Enable or disable zero window size in SYN+ACK for this service. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgVirtServiceCookiePath 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.13 displaystring read-only
The cookie path name of the virtual server used for cookie load balance.
                           slbNewCfgVirtServiceCookieSecure 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.14 integer read-only
Is cookie secure [yes/no] [Default: no]. Enumeration: 'yes': 2, 'no': 1.
                           slbNewCfgVirtServiceNoRtsp 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.15 integer read-only
Enable or disable only rtsp SLB for this service. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgVirtServiceCkRebind 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.16 integer read-only
Enable or disable server rebalancing when cookie is absent. When enabled, server load balancing will happen for subsequent request comes without cookie. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgVirtServiceParseLimit 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.17 integer read-only
Enable or disable buffer limit for content based selection. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgVirtServiceParseLength 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.18 integer read-only
The buffer length for content based selection.
                           slbNewCfgVirtServiceUriNorm 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.19 integer read-only
Enable or disable URI normalization for HTTP content matching. Enumeration: 'disabled': 2, 'enabled': 1.
             portCfg 1.3.6.1.4.1.1872.2.5.4.1.1.5
                 slbPortTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.5.1 integer32 read-only
The maximum number of entries in SLB Port Table.
                 slbCurCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.5.2 no-access
The table of ports and their SLB states
                     slbCurCfgPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1 no-access
A row in the slbPortTable
                         slbCurCfgPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.1 integer32 read-only
The port number for which the SLB information pertains.
                         slbCurCfgPortSlbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.2 integer read-only
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port Enumeration: 'none': 1, 'client': 2, 'client-server': 4, 'server': 3.
                         slbCurCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.3 integer read-only
Enable or disable hot standby processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.4 integer read-only
Enable or disable inter-switch processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbPipState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.5 integer read-only
Enable or disable use of proxy IP address on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbRtsState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.6 integer read-only
Enable or disable RTS processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbIdslbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.7 integer read-only
Enable or disable Intrusion Detection server load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.9 integer read-only
Enable or disable Filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbServState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.10 integer read-only
Enable or disable server processing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbClntState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.11 integer read-only
Enable or disable client processing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbL3Filter 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.12 integer read-only
Enable or disable Layer3 Filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbCurCfgPortSlbFilterBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.13 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
                         slbCurCfgPortInterSwitchVlan 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.14 integer read-only
VLAN for inter-switch processing.
                         slbCurCfgPortVlanBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.15 octet string read-only
VLANs associated with this port. The VLANs are presented in a bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 9 || || || ||___ VLAN 8 || |____ VLAN 7 || . . . ||_________ VLAN 2 |__________ VLAN 1 where x : 1 - VLAN is associated 0 - VLAN is not associated
                 slbNewCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.5.3 no-access
The table of ports and their SLB states
                     slbNewCfgPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1 no-access
A row in the slbPortTable
                         slbNewCfgPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.1 integer32 read-only
The port number for which the SLB information pertains.
                         slbNewCfgPortSlbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.2 integer read-write
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port Enumeration: 'none': 1, 'client': 2, 'client-server': 4, 'server': 3.
                         slbNewCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.3 integer read-write
Enable or disable hot standby processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.4 integer read-write
Enable or disable inter-switch processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbPipState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.5 integer read-write
Enable or disable use of proxy IP address on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbRtsState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.6 integer read-write
Enable or disable RTS processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortDelete 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.7 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgPortSlbIdslbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.8 integer read-write
Enable or disable Intrusion Detection server load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.10 integer read-write
Enable or disable Filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbAddFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.11 integer read-write
Specify the Filter Number to be added to this Port table.
                         slbNewCfgPortSlbRemFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.12 integer read-write
Specify the Filter Number to be deleted from this Port table.
                         slbNewCfgPortSlbServState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.13 integer read-write
Enable or disable Server Processing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbClntState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.14 integer read-write
Enable or disable Client Processing. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbL3Filter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.15 integer read-write
Enable or disable Layer3 Filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                         slbNewCfgPortSlbFilterBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.16 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
                         slbNewCfgPortInterSwitchVlan 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.17 integer read-write
VLAN for inter-switch processing.
                         slbNewCfgPortVlanBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.18 octet string read-only
VLANs associated with this port. The VLANs are presented in a bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 9 || || || ||___ VLAN 8 || |____ VLAN 7 || . . . ||_________ VLAN 2 |__________ VLAN 1 where x : 1 - VLAN is associated 0 - VLAN is not associated
             syncCfg 1.3.6.1.4.1.1872.2.5.4.1.1.6
                 syncGeneralCfg 1.3.6.1.4.1.1872.2.5.4.1.1.6.1
                     slbCurCfgSyncFilt 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.1 integer read-only
Enable or disable synch filter configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncFilt 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.2 integer read-write
Enable or disable synch filter configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncPort 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.3 integer read-only
Enable or disable synch port configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncPort 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.4 integer read-write
Enable or disable synch port configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncVrrp 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.5 integer read-only
Enable or disable synch VRRP Priorities. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncVrrp 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.6 integer read-write
Enable or disable synch VRRP Priorities. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.7 integer read-only
Enable or disable synch proxy IP addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.8 integer read-write
Enable or disable synch proxy IP addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncSfo 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.9 integer read-only
Enable or disable synch stateful failover. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncSfo 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.10 integer read-write
Enable or disable synch stateful failover. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncSfoUpdatePeriod 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.11 integer read-only
The stateful failover update period in seconds.
                     slbNewCfgSyncSfoUpdatePeriod 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.12 integer read-write
The stateful failover update period in seconds.
                     slbCurCfgSyncBwm 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.13 integer read-only
Enable or disable syncing BWM configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncBwm 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.14 integer read-write
Enable or disable syncing BWM configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncPeerPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.15 integer read-only
Enable or disable synch peer proxy IP addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncPeerPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.16 integer read-write
Enable or disable synch peer proxy IP addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncCerts 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.17 integer read-only
Enable or disable syncing certificate repository components. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncCerts 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.18 integer read-write
Enable or disable syncing certificate repository components. If Enable option is selected then Passphrase to encrypt/decrypt certificates and private keys during configuration sync must be set in all peer switches. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbCurCfgSyncCertsPassPhrase 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.19 displaystring read-only
Set passphrase to encrypt/decrypt synced certificates' and dnssec private keys.
                     slbNewCfgSyncCertsPassPhrase 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.20 displaystring read-write
Set passphrase to encrypt/decrypt synced certificates' and dnssec private keys.Same PassPhrase should be set at all peer switches.
                     slbNewCfgSyncCertsConfPassPhrase 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.21 displaystring read-write
This character string is used to confirm Passphrase which is already entered in slbNewCfgSyncCertsPassPhrase.
                     slbCurCfgSyncRoute 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.22 integer read-only
Enable or disable synch static route configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbNewCfgSyncRoute 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.23 integer read-write
Enable or disable synch static route configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbPeerTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.6.2 integer32 read-only
The maximum number of entries in SLB Peer Table.
                 slbCurCfgPeerTable 1.3.6.1.4.1.1872.2.5.4.1.1.6.3 no-access
The table of Synch Peer Switch configuration in the current_config.
                     slbCurCfgPeerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1 no-access
Information about Synch Peer Switch configuration.
                         slbCurCfgPeerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.1 integer32 read-only
The index for synch peer switchs.
                         slbCurCfgPeerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.2 ipaddress read-only
The IP address of the peer switch.
                         slbCurCfgPeerState 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.3 integer read-only
Enable or disable the peer switch. Enumeration: 'enable': 1, 'disable': 2.
                         slbCurCfgPeerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.4 displaystring read-only
The IPv6 address of the Peer switch. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         slbCurCfgPeerIpVersion 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.5 integer read-only
Peer Ip Address Version. Enumeration: 'ipv4': 4, 'ipv6': 6.
                 slbNewCfgPeerTable 1.3.6.1.4.1.1872.2.5.4.1.1.6.4 no-access
The table of Synch Peer Switch configuration in the new_config.
                     slbNewCfgPeerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1 no-access
Information about synch peer switch configuration.
                         slbNewCfgPeerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.1 integer32 read-only
The index number for synch peer switchs.
                         slbNewCfgPeerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.2 ipaddress read-only
The IP address of the peer switch.
                         slbNewCfgPeerState 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.3 integer read-only
Enable or disable the peer switch. Enumeration: 'enable': 1, 'disable': 2.
                         slbNewCfgPeerDelete 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                         slbNewCfgPeerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.5 displaystring read-only
The IPv6 address of the Peer switch. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         slbNewCfgPeerIpVersion 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.6 integer read-only
Peer Ip Address Version. Enumeration: 'ipv4': 4, 'ipv6': 6.
             wapCfg 1.3.6.1.4.1.1872.2.5.4.1.1.7
                 slbCurCfgWapTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.7.1 integer read-only
Enable or disable WAP load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgWapTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.7.2 integer read-write
Enable or disable WAP load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgWapDebug 1.3.6.1.4.1.1872.2.5.4.1.1.7.3 integer read-only
WAP Debug level.
                 slbNewCfgWapDebug 1.3.6.1.4.1.1872.2.5.4.1.1.7.4 integer read-write
WAP Debug level.
             waphcCfg 1.3.6.1.4.1.1872.2.5.4.1.1.8
                 slbCurCfgWaphcWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.1 integer read-only
The WSP port number to health check.
                 slbNewCfgWaphcWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.2 integer read-write
The WSP port number to health check.
                 slbCurCfgWaphcOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.3 integer read-only
The offset in received WSP packet.
                 slbNewCfgWaphcOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.4 integer read-write
The offset in received WSP packet.
                 slbCurCfgWaphcSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.5 octet string read-only
The content to be sent to the WAP gateway.
                 slbNewCfgWaphcSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.6 octet string read-write
The content to be sent to the WAP gateway.
                 slbCurCfgWaphcRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.7 octet string read-only
The content to be received from the WAP gateway.
                 slbNewCfgWaphcRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.8 octet string read-write
The content to be received from the WAP gateway.
                 slbCurCfgWaphcWTLSPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.9 integer read-only
The WTLS port number to health check.
                 slbNewCfgWaphcWTLSPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.10 integer read-write
The WTLS port number to health check.
                 slbCurCfgWaphcWTPSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.11 octet string read-only
The WTP+WSP content to be sent to the WAP gateway.
                 slbNewCfgWaphcWTPSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.12 octet string read-write
The WTP+WSP content to be sent to the WAP gateway.
                 slbCurCfgWaphcWTPRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.13 octet string read-only
The WTP+WSP content to be received from the WAP gateway.
                 slbNewCfgWaphcWTPRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.14 octet string read-write
The WTP+WSP content to be received from the WAP gateway.
                 slbCurCfgWaphcWTPConnContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.15 octet string read-only
The WTP+WSP CONNECT content to be sent to the WAP gateway.
                 slbNewCfgWaphcWTPConnContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.16 octet string read-write
The WTP+WSP CONNECT content to be sent to the WAP gateway.
                 slbCurCfgWaphcWTPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.17 integer read-only
The WTP port number to health check.
                 slbNewCfgWaphcWTPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.18 integer read-write
The WTP port number to health check.
                 slbCurCfgWaphcWTLSWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.19 integer read-only
The WTLS+WSP port number to health check.
                 slbNewCfgWaphcWTLSWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.20 integer read-write
The WTLS+WSP port number to health check.
                 slbCurCfgWaphcWTPOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.21 integer read-only
The offset in received WTP packet.
                 slbNewCfgWaphcWTPOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.22 integer read-write
The offset in received WTP packet.
                 slbCurCfgWaphcCouple 1.3.6.1.4.1.1872.2.5.4.1.1.8.23 integer read-only
Enable or disable coupling of WAP and RADIUS Accounting health checks. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbNewCfgWaphcCouple 1.3.6.1.4.1.1872.2.5.4.1.1.8.24 integer read-write
Enable or disable coupling of WAP and RADIUS Accounting health checks. Enumeration: 'disabled': 2, 'enabled': 1.
                 slbCurCfgWaphcConnPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.25 octet string read-only
The CONNECT PDU to be sent to the WAP gateway.
                 slbNewCfgWaphcConnPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.26 octet string read-write
The CONNECT PDU to be sent to the WAP gateway.
                 slbCurCfgWaphcSndPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.27 octet string read-only
The GET PDU to be sent to the WAP gateway.
                 slbNewCfgWaphcSndPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.28 octet string read-write
The GET PDU to be sent to the WAP gateway.
                 slbCurCfgWaphcRcvPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.29 octet string read-only
The REPLY PDU to be received from the WAP gateway.
                 slbNewCfgWaphcRcvPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.30 octet string read-write
The REPLY PDU to be received from the WAP gateway.
             synAttackDetCfg 1.3.6.1.4.1.1872.2.5.4.1.1.9
                 synAttackCurCfgInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.1 integer read-only
The interval specified in seconds determines how frequently the switch checks for SYN attacks.
                 synAttackNewCfgInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.2 integer read-write
The interval specified in seconds determines how frequently the switch checks for SYN attacks.
                 synAttackCurCfgThreshhold 1.3.6.1.4.1.1872.2.5.4.1.1.9.3 integer read-only
The threshhold indicating the number of new half-open sessions per second.
                 synAttackNewCfgThreshhold 1.3.6.1.4.1.1872.2.5.4.1.1.9.4 integer read-write
The threshhold indicating the number of new half-open sessions per second.
                 synAttackCurCfgResponseInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.5 integer read-only
The interval specified in milliseconds determines how frequently the switch generate new SYN cookie value.
                 synAttackNewCfgResponseInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.6 integer read-write
The interval specified in milliseconds determines how frequently the switch generate new SYN cookie value.
                 synAttackCurCfgOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.9.7 integer read-only
Globally ON or OFF of SYN Protection. Enumeration: 'on': 1, 'off': 2.
                 synAttackNewCfgOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.9.8 integer read-write
Globally ON or OFF of SYN Protection. Enumeration: 'on': 1, 'off': 2.
             hcsCfg 1.3.6.1.4.1.1872.2.5.4.1.1.13
                   hcsTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.13.1 integer32 read-only
The maximum number of scriptable health check entries.
                   hcsCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.13.2 no-access
The scriptable health check table in the current configuration block.
                       hcsCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1 no-access
A row in the scriptable health check table.
                           hcsCurCfgScriptIndex 1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1.1 integer32 read-only
The index in the scriptable health check table.
                           hcsCurCfgScriptString 1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1.2 octet string read-only
The scriptable health check string.
                   hcsNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.13.3 no-access
The scriptable health check table in the new configuration block.
                       hcsNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1 no-access
A row in the scriptable health check table.
                           hcsNewCfgScriptIndex 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.1 integer32 read-only
The index the scriptable health check.
                           hcsNewCfgScriptString 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.2 octet string read-only
The scriptable health check string.
                           hcsNewCfgAddSendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.4 displaystring read-only
Append an 'send' command to the script. The set value of this object should be the exact characters to be sent on the port opened with the 'open' command. The 'send ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'send ' characters will be counted as characters in the script.
                           hcsNewCfgAddExpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.5 displaystring read-only
Append an 'expect' command to the script. The set value of this object should be the exact characters expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'expect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'expect ' characters will be counted as characters in the script.
                           hcsNewCfgAddCloseCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.6 integer read-only
Add close command to end of the script. When set to the value of 2 (add), 'close' will be appended to the script. Also, a 'null terminator'(\0) will be automatically appended. The null terminator and the 'close' characters will be counted as characters in the script. This command is only valid for TCP. Enumeration: 'close': 2, 'other': 1.
                           hcsNewCfgRemLastCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.7 integer read-only
Remove the last command from the script. When set to the value of 2 (remove), last command will be removed from the script. When read, other(1) is returned. Enumeration: 'other': 1, 'remove': 2.
                           hcsNewCfgDeleteScript 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.8 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                           hcsNewCfgAddOffsetCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.9 integer read-only
Append an 'offset' command to the script. The set value of this object should be the offset from the beginning of the data area of the TCP/UDP packet to start matching the string configured in the last bexpect command. The 'offset ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'offset ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
                           hcsNewCfgAddWaitCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.10 integer read-only
Append a 'wait' command to the script. The set value of this object should be the maximum waiting time for the packet containing the content configured in the last expect command. Wait time is in units of milliseconds, and the maximum supported is 65535 ms. The 'wait ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'wait ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
                           hcsNewCfgAddOpenProtCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.11 displaystring read-only
Append an 'open' command to the script. The value of this object should be real server port number or name, followed by a comma, and then the protocol (either tcp or udp), e.g. '80,tcp'. Only the port number or name, and tcp or udp should be set. The 'open ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'open ' characters will be counted as characters in the script.
                           hcsNewCfgAddNsendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.12 displaystring read-only
Append an 'nsend' command to the script. The 'nsend' command is used to append additional content to the packet generated by the 'bsend' command when the desired 'bsend' content is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nsend ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'nsend ' characters will be counted as characters in the script.
                           hcsNewCfgAddNexpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.13 displaystring read-only
Append an 'nexpect' command to the script. The 'nexpect' command is used to append additional characters to the 'bexpect' string when the desired 'bexpect' string is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nexpect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'nexpect ' characters will be counted as characters in the script.
                           hcsNewCfgAddDepthCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.14 integer read-only
Append a 'depth' command to the script. The set value of this object should be the depth (search window) within the data area of the TCP/UDP packet for matching the string configured in the last bexpect command. The 'depth ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'depth ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
                           hcsNewCfgAddLongBsendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.15 octet string read-only
Append a 'bsend' command to the script. The set value of this object should be the exact binary data in hex format to be sent on the port opened with the 'open' command. The 'bsend ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'bsend ' characters will be counted as characters in the script.
                           hcsNewCfgAddLongBexpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.16 octet string read-only
Append a 'bexpect' command to the script. The set value of this object should be the exact binary data in hex format expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'bexpect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'bexpect ' characters will be counted as characters in the script.
                           hcsNewCfgAddLongSendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.17 octet string read-only
Append an 'send' command to the script. The set value of this object should be the exact characters to be sent on the port opened with the 'open' command. The 'send ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'send ' characters will be counted as characters in the script.
                           hcsNewCfgAddLongExpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.18 octet string read-only
Append an 'expect' command to the script. The set value of this object should be the exact characters expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'expect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'expect ' characters will be counted as characters in the script.
                           hcsNewCfgAddLongNsendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.19 octet string read-only
Append an 'nsend' command to the script. The 'nsend' command is used to append additional content to the packet generated by the 'bsend' command when the desired 'bsend' content is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nsend ' characters will be automatically appended. Also a 'null terminator' (\0) will be automatically appended. The null terminator and the 'nsend ' characters will be counted as characters in the script.
                           hcsNewCfgAddLongNexpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.20 octet string read-only
Append an 'nexpect' command to the script. The 'nexpect' command is used to append additional characters to the 'bexpect' string when the desired 'bexpect' string is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nexpect ' characters will be automatically appended. Also a 'null terminator'(\0) will be automatically appended. The null terminator and the 'nexpect ' characters will be counted as characters in the script.
             snmphcCfg 1.3.6.1.4.1.1872.2.5.4.1.1.14
                   snmphcTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.14.1 integer32 read-only
The maximum number of SNMP health check entries.
                   snmphcCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.14.2 no-access
The SNMP health check table in the current configuration block.
                       snmphcCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1 no-access
A row in the SNMP health check table.
                           snmphcCurCfgIndex 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.1 integer32 read-only
The index of the SNMP health check.
                           snmphcCurCfgOid 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.2 displaystring read-only
The OID to be sent in the SNMP get request packet.
                           snmphcCurCfgCommString 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.3 displaystring read-only
The community string to be used in the SNMP get request packet.
                           snmphcCurCfgRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.4 displaystring read-only
The content expected in the SNMP response packet. The content specified can be either a string or an integer value.
                           snmphcCurCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.5 integer read-only
When the invert option is enabled the health check will fail if the response packet contains the value specified in the receive content field. Enumeration: 'disabled': 2, 'enabled': 1.
                           snmphcCurCfgUseWeight 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.6 integer read-only
When the weight option is enabled the real server weights are adjusted dynamically based on the SNMP health check response. Enumeration: 'disabled': 2, 'enabled': 1.
                   snmphcNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.14.3 no-access
The SNMP health check table in the new configuration block.
                       snmphcNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1 no-access
A row in the SNMP health check table.
                           snmphcNewCfgIndex 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.1 integer32 read-only
The index of the SNMP health check.
                           snmphcNewCfgOid 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.2 displaystring read-only
The OID to be sent in the SNMP get request packet.
                           snmphcNewCfgCommString 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.3 displaystring read-only
The community string to be used in the SNMP get request packet.
                           snmphcNewCfgRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.4 displaystring read-only
The content expected in the SNMP response packet. The content specified can be either a string or an integer value.
                           snmphcNewCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.5 integer read-only
When the invert option is enabled the health check will fail if the response packet contains the value specified in the receive content field. Enumeration: 'disabled': 2, 'enabled': 1.
                           snmphcNewCfgDeleteHc 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.6 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                           snmphcNewCfgUseWeight 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.7 integer read-only
When the weight option is enabled the real server weights are adjusted dynamically based on the SNMP health check response. Enumeration: 'disabled': 2, 'enabled': 1.
             pipTblCfg 1.3.6.1.4.1.1872.2.5.4.1.1.15
                   pipTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.15.1 integer32 read-only
The maximum number of PIP entries.
                   pipCurCfgBaseType 1.3.6.1.4.1.1872.2.5.4.1.1.15.2 integer read-only
The PIP base. 1 = port based, 2 = VLAN based Enumeration: 'vlan': 2, 'port': 1.
                   pipCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.3 no-access
The PIP table in the current configuration block.
                       pipCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1 no-access
A row in the PIP table.
                           pipCurCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.1 ipaddress read-only
Proxy IP address by the instance of the pipCurCfgIndex.
                           pipCurCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.2 octet string read-only
This is a bit map of port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
                           pipCurCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.3 octet string read-only
This is a bit map of VLAN. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
                   pipNewCfgBaseType 1.3.6.1.4.1.1872.2.5.4.1.1.15.4 integer read-write
The PIP base. 1 = port based, 2 = VLAN based Enumeration: 'vlan': 2, 'port': 1.
                   pipNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.5 no-access
The PIP table in the New configuration block.
                       pipNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1 no-access
A row in the PIP table.
                           pipNewCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.1 ipaddress read-only
PIP address by the instance of the pipCurCfgIndex.
                           pipNewCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.2 octet string read-only
The bit map of port for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
                           pipNewCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.3 octet string read-only
The bit map of VLAN for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
                           pipNewCfgDelete 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                           pipNewCfgAddPortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.5 integer32 read-only
The Port or VLAN to be associated with the PIP. When read, 0 is returned.
                           pipNewCfgRemovePortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.6 integer32 read-only
The Port or VLAN to be disassociated from the PIP. When read, 0 is returned.
                           pipNewCfgAddPort 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.7 integer32 read-only
The Port to be associated with the PIP. When read, 0 is returned.
                           pipNewCfgAddVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.8 integer32 read-only
The VLAN to be associated with the PIP. When read, 0 is returned.
                           pipNewCfgRemovePort 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.9 integer32 read-only
The Port to be disassociated from the PIP. When read, 0 is returned.
                           pipNewCfgRemoveVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.10 integer32 read-only
The VLAN to be disassociated from the PIP. When read, 0 is returned.
                   pip6CurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.6 no-access
The IPv6 PIP table in the current configuration block.
                       pip6CurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1 no-access
A row in the IPv6 PIP table.
                           pip6CurCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.1 displaystring read-only
IPv6 Proxy IP address by the instance of the pip6CurCfgIndex.
                           pip6CurCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.2 octet string read-only
This is a bit map of port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
                           pip6CurCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.3 octet string read-only
This is a bit map of VLAN. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
                   pip6NewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.7 no-access
The IPv6 PIP table in the New configuration block.
                       pip6NewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1 no-access
A row in the IPv6 PIP table.
                           pip6NewCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.1 displaystring read-only
IPv6 PIP address by the instance of the pip6CurCfgIndex.
                           pip6NewCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.2 octet string read-only
The bit map of port for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
                           pip6NewCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.3 octet string read-only
The bit map of VLAN for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
                           pip6NewCfgDelete 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                           pip6NewCfgAddPortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.5 integer32 read-only
The Port or VLAN to be associated with the PIP. When read, 0 is returned.
                           pip6NewCfgRemovePortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.6 integer32 read-only
The Port or VLAN to be disassociated from the PIP. When read, 0 is returned.
                           pip6NewCfgAddPort 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.7 integer32 read-only
The Port to be associated with the PIP. When read, 0 is returned.
                           pip6NewCfgAddVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.8 integer32 read-only
The VLAN to be associated with the PIP. When read, 0 is returned.
                           pip6NewCfgRemovePort 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.9 integer32 read-only
The Port to be disassociated from the PIP. When read, 0 is returned.
                           pip6NewCfgRemoveVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.10 integer32 read-only
The VLAN to be disassociated from the PIP. When read, 0 is returned.
             linklbCfg 1.3.6.1.4.1.1872.2.5.4.1.1.16
                   slbCurCfgLinklbState 1.3.6.1.4.1.1872.2.5.4.1.1.16.1 integer read-only
Enable or disable Inbound Link load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                   slbNewCfgLinklbState 1.3.6.1.4.1.1872.2.5.4.1.1.16.2 integer read-write
Enable or disable Inbound Link load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                   slbCurCfgLinklbRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.16.3 integer32 read-only
The real server group number for Link load balancing.
                   slbNewCfgLinklbRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.16.4 integer32 read-write
The real server group number for Link load balancing.
                   slbLinklbDrecord 1.3.6.1.4.1.1872.2.5.4.1.1.16.5
                       slbDrecordTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.1 integer32 read-only
The maximum number of entries in Drecord table.
                       slbCurCfgDrecordTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2 no-access
The table of Domain records for Inbound link load balancing in the current configuration block.
                           slbCurCfgDrecordEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1 no-access
A row in the Domain record table for Inbound Link Load balancing.
                               slbCurCfgDrecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.1 integer read-only
The index of the Domain record table.
                               slbCurCfgDomainRecordState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.2 integer read-only
Enable/disable a domain record. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurCfgDomainRecordName 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.3 displaystring read-only
The name of the domain record.
                       slbNewCfgDrecordTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3 no-access
The table of Domain records for Inbound link load balancing in the new configuration block.
                           slbNewCfgDrecordEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1 no-access
A row in the Domain record table for Inbound Link Load balancing.
                               slbNewCfgDrecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.1 integer read-only
The index of the Domain record table.
                               slbNewCfgDomainRecordState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.2 integer read-only
Enable/disable a domain record. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgDomainRecordName 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.3 displaystring read-only
The name of the domain record.
                               slbNewCfgDrecordDelete 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                       slbDrecordVirtRealMappingTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.4 integer32 read-only
The maximum number of entries in Drecord Virtual Real server mapping Table.
                       slbCurCfgDrecordVirtRealMappingTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5 no-access
The table of Domain records and virtual server and real server mappings.
                           slbCurCfgDrecordVirtRealMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1 no-access
A row in the Domain record and virtual/real server mapping table for Inbound Link Load balancing.
                               slbCurCfgDomainRecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.1 integer read-only
The number of the domain record.
                               slbCurCfgEntryIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.2 integer read-only
The number of the entry virtual real server mapping.
                               slbCurCfgDrecordVirtServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.3 integer32 read-only
The virtual server number.
                               slbCurCfgDrecordRealServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.4 integer32 read-only
The Real server number.
                               slbCurCfgDrecordEntryState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.5 integer read-only
Enable/disable a mapping in this table. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgDrecordVirtRealMappingTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6 no-access
The table of Domain records and virtual server and real server mappings.
                           slbNewCfgDrecordVirtRealMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1 no-access
A row in the Domain record and virtual/real server mapping table for Inbound Link Load balancing.
                               slbNewCfgDomainRecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.1 integer read-only
The number of the domain record.
                               slbNewCfgEntryIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.2 integer read-only
The number of the virtual real server mapping.
                               slbNewCfgDrecordVirtServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.3 integer32 read-only
The virtual server number.
                               slbNewCfgDrecordRealServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.4 integer32 read-only
The Real server number.
                               slbNewCfgDrecordEntryState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.5 integer read-only
Enable/disable a mapping in this table. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgDrecordEntryDelete 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.6 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                   slbCurCfgLinklbTTL 1.3.6.1.4.1.1872.2.5.4.1.1.16.6 integer read-only
Set Time to Live for DNS resource records.
                   slbNewCfgLinklbTTL 1.3.6.1.4.1.1872.2.5.4.1.1.16.7 integer read-write
Set Time to Live for DNS resource records.
             smtportCfg 1.3.6.1.4.1.1872.2.5.4.1.1.17
                   slbSmtportTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.17.1 integer32 read-only
The maximum number of entries in service mapping real port table.
                   slbCurCfgSmtportTable 1.3.6.1.4.1.1872.2.5.4.1.1.17.2 no-access
The service mapping real port table.
                       slbCurCfgSmtportEntry 1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1 no-access
A row in the service mapping real port table.
                           slbCurCfgSmtportIndex 1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1.1 integer32 read-only
The service mapping real port index.
                           slbCurCfgSmtportNum 1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1.2 integer read-only
The service mapping real port number.
                   slbNewCfgSmtportTable 1.3.6.1.4.1.1872.2.5.4.1.1.17.3 no-access
The table of real server service ports.
                       slbNewCfgSmtportEntry 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1 no-access
A row in the service mapping real port table.
                           slbNewCfgSmtportIndex 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.1 integer32 read-only
The service mapping real port index
                           slbNewCfgSmtportNum 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.2 integer read-only
The service mapping real port number.
                           slbNewCfgSmtportDelete 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.3 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                   slbSmtportTableAvaibleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.17.4 integer32 read-only
The first free real port index of the Service Mapping Table. Value 0 will be returned when all 16 real ports are configured.
             acclCfg 1.3.6.1.4.1.1872.2.5.4.1.1.18
                   caching 1.3.6.1.4.1.1872.2.5.4.1.1.18.1
                       slbCurAcclCfgCachememcache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.1 integer read-only
Maximum percentage of Alteon RAM to be allocate for caching.
                       slbNewAcclCfgCachememcache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.2 integer read-write
Defines the maximum percentage of Alteon RAM to be allocate for caching.
                       slbCurAcclCfgCacheOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.3 integer read-only
Globally ON or OFF of caching. Enumeration: 'on': 1, 'off': 2.
                       slbNewAcclCfgCacheOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.4 integer read-write
Globally ON or OFF of caching. Enumeration: 'on': 1, 'off': 2.
                       slbCurAcclCfgCachePolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5 no-access
The table for configuring caching policy.
                           slbCurAcclCfgCachePolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1 no-access
A row in the caching policy table.
                               slbCurAcclCfgCachePolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.1 displaystring read-only
The caching policy ID(key id) as an index.
                               slbCurAcclCfgCachePolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.2 displaystring read-only
Cache policy name.
                               slbCurAcclCfgCachePolExpireTime 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.3 integer read-only
Maximum expiration time in seconds.
                               slbCurAcclCfgCachePolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.4 integer read-only
Minimum Object size to be stored in bytes.
                               slbCurAcclCfgCachePolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.5 integer read-only
Maximum Object size to be stored in bytes.
                               slbCurAcclCfgCachePolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.6 displaystring read-only
URL list which is associated with this policy.
                               slbCurAcclCfgCachePolStore 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.7 integer read-only
Caching behavior for storing new objects in cache. Enumeration: 'cacheall': 2, 'srvrhdr': 1.
                               slbCurAcclCfgCachePolServe 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.8 integer read-only
Cache behavior when serving clients with objects. Enumeration: 'cache': 3, 'clnthdr': 1, 'refresh': 2.
                               slbCurAcclCfgCachePolQuery 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.9 integer read-only
Specifies whether query parameters added to object URL should be considered when storing/serving object from cache. Enumeration: 'ignore': 2, 'consider': 1.
                               slbCurAcclCfgCachePolBrowser 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.10 integer read-only
Optimize browser cache. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurAcclCfgCachePolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.11 integer read-only
Status (enable/disable) of caching policy. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCachePolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6 no-access
The table for configuring caching policy.
                           slbNewAcclCfgCachePolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1 no-access
A row in the caching policy table.
                               slbNewAcclCfgCachePolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.1 displaystring read-only
The caching policy ID(key id) as an index, length of the string should be 32 charecters.
                               slbNewAcclCfgCachePolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.2 displaystring read-only
Cache policy name, length of the string should be 32 charecters.
                               slbNewAcclCfgCachePolExpireTime 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.3 integer read-only
Set maximum expiration time, Range is 60- 43,200,000 seconds (~500 days).
                               slbNewAcclCfgCachePolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.4 integer read-only
Minimum Object size to be stored [Bytes], Values: 1-65536.
                               slbNewAcclCfgCachePolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.5 integer read-only
Maximum Object size to be stored [Bytes], Values: 1-512000000.
                               slbNewAcclCfgCachePolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.6 displaystring read-only
URL list to be associated with this policy, Values: 1-32 character string.
                               slbNewAcclCfgCachePolStore 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.7 integer read-only
Define caching behavior for storing New objects in cache. Enumeration: 'cacheall': 2, 'srvrhdr': 1.
                               slbNewAcclCfgCachePolServe 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.8 integer read-only
Define cache behavior when serving clients with objects. Enumeration: 'cache': 3, 'clnthdr': 1, 'refresh': 2.
                               slbNewAcclCfgCachePolQuery 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.9 integer read-only
Specifies whether query parameters added to object URL should be considered when storing/serving object from cache. Enumeration: 'ignore': 2, 'consider': 1.
                               slbNewAcclCfgCachePolBrowser 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.10 integer read-only
Optimize browser cache. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCachePolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.11 integer read-only
Enable or disable caching policy. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCachePolDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.12 integer read-only
Delete Caching policy. Enumeration: 'other': 1, 'delete': 2.
                       slbCurAcclCfgCacheUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7 no-access
The table for configuring caching URL LIST.
                           slbCurAcclCfgCacheUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1 no-access
A row in the caching URL LIST table.
                               slbCurAcclCfgCacheUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.1 displaystring read-only
The caching policy URL LIST (key id) as an index.
                               slbCurAcclCfgCacheUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.2 displaystring read-only
Cache URL LIST name.
                               slbCurAcclCfgCacheUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.3 integer read-only
Status (enable/disable) of caching URL LIST. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCacheUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8 no-access
The table for configuring caching URL LIST.
                           slbNewAcclCfgCacheUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1 no-access
A row in the caching URL LIST table.
                               slbNewAcclCfgCacheUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.1 displaystring read-only
The caching policy URL LIST (key id) as an index.
                               slbNewAcclCfgCacheUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.2 displaystring read-only
Cache URL LIST name.
                               slbNewAcclCfgCacheUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.3 integer read-only
Status (enable/disable) of caching URL LIST. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCacheUrlListDel 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.5 integer read-only
Delete Caching URL list. Enumeration: 'other': 1, 'delete': 2.
                               slbNewAcclCfgCacheUrlListCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.6 displaystring read-only
Duplicating an entire Rule-List by defining the destination Rule-list id.
                       slbCurAcclCfgCacheUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9 no-access
The table for configuring caching URL Rules.
                           slbCurAcclCfgCacheUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1 no-access
A row in the caching URL Rule table.
                               slbCurAcclCfgCacheUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.1 displaystring read-only
The caching policy URL LIST (key id) as an index.
                               slbCurAcclCfgCacheUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.2 integer read-only
The caching URL Rule number as an index.
                               slbCurAcclCfgCacheUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.3 displaystring read-only
The caching URL Rule name.
                               slbCurAcclCfgCacheUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.4 integer read-only
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                               slbCurAcclCfgCacheUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.5 displaystring read-only
Defines the Virtual Host for which this rule applies.
                               slbCurAcclCfgCacheUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.6 integer read-only
Defines whether URL matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                               slbCurAcclCfgCacheUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.7 displaystring read-only
Defines URL of specific object (file/folder) to be matched by this rule.
                               slbCurAcclCfgCacheUrlRuleExpire 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.8 integer read-only
The Maximum time for the cache object to served from cache (in seconds).
                               slbCurAcclCfgCacheUrlRuleCache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.9 integer read-only
Defines if the matched response should be cached or not. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurAcclCfgCacheUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.10 integer read-only
Status (enable/disable) of caching URL Rule. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCacheUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10 no-access
The table for configuring caching URL Rules.
                             slbNewAcclCfgCacheUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1 no-access
A row in the caching URL Rule table.
                                 slbNewAcclCfgCacheUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.1 displaystring read-only
The caching policy URL LIST (key id) as an index.
                                 slbNewAcclCfgCacheUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.2 integer read-only
The caching URL Rule number as an index.
                                 slbNewAcclCfgCacheUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.3 displaystring read-only
The caching URL Rule name.
                                 slbNewAcclCfgCacheUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.4 integer read-only
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                                 slbNewAcclCfgCacheUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.5 displaystring read-only
Defines the Virtual Host for which this rule applies.
                                 slbNewAcclCfgCacheUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.6 integer read-only
Defines whether URL matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                                 slbNewAcclCfgCacheUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.7 displaystring read-only
Defines URL of specific object (file/folder) to be matched by this rule.
                                 slbNewAcclCfgCacheUrlRuleExpire 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.8 integer read-only
The Maximum time for the cache object to served from cache (in seconds).
                                 slbNewAcclCfgCacheUrlRuleCache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.9 integer read-only
Defines if the matched response should be cached or not. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewAcclCfgCacheUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.10 integer read-only
Status (enable/disable) of caching URL Rule. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewAcclCfgCacheUrlRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.11 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                                 slbNewAcclCfgCacheUrlRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.12 integer read-only
Copy rule to another index in the same rule-list. When read, zero is returned.
                   compression 1.3.6.1.4.1.1872.2.5.4.1.1.18.2
                       slbCurAcclCfgCompOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.1 integer read-only
Globally ON or OFF of compression. Enumeration: 'on': 1, 'off': 2.
                       slbNewAcclCfgCompOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.2 integer read-write
Globally ON or OFF of compression. Enumeration: 'on': 1, 'off': 2.
                       slbCurAcclCfgCompPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3 no-access
The table for configuring compression policy.
                           slbCurAcclCfgCompPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1 no-access
A row in the compression policy table.
                               slbCurAcclCfgCompPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.1 displaystring read-only
The compression policy ID(key id) as an index.
                               slbCurAcclCfgCompPolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.2 displaystring read-only
Compression policy name.
                               slbCurAcclCfgCompPolAlgrthm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.3 integer read-only
Preferred compression algorithm. Enumeration: 'gzip': 1, 'deflate': 2.
                               slbCurAcclCfgCompPolComplv1 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.4 integer read-only
Compression level.
                               slbCurAcclCfgCompPolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.5 integer read-only
Minimum file size to be compressed [Byte].
                               slbCurAcclCfgCompPolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.6 integer read-only
Maximum file size to be compressed [Byte].
                               slbCurAcclCfgCompPolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.7 displaystring read-only
URL list which is associated with this policy.
                               slbCurAcclCfgCompPolBrwsList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.8 displaystring read-only
Browser list which is associated with this policy.
                               slbCurAcclCfgCompPolPreDefBrwsRuleList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.9 integer read-only
Enable/Disable predefined browser exceptions rule-list. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurAcclCfgCompPolCompsrv 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.10 integer read-only
Enable/Disable compression by real server. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurAcclCfgCompPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.11 integer read-only
Status (enable/disable) of compression policy. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCompPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4 no-access
The table for configuring compression policy.
                           slbNewAcclCfgCompPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1 no-access
A row in the compression policy table.
                               slbNewAcclCfgCompPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.1 displaystring read-only
The compression policy ID(key id) as an index.
                               slbNewAcclCfgCompPolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.2 displaystring read-only
Compression policy name.
                               slbNewAcclCfgCompPolAlgrthm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.3 integer read-only
Preferred compression algorithm. Enumeration: 'gzip': 1, 'deflate': 2.
                               slbNewAcclCfgCompPolComplv1 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.4 integer read-only
Compression level.
                               slbNewAcclCfgCompPolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.5 integer read-only
Minimum file size to be compressed [Byte].
                               slbNewAcclCfgCompPolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.6 integer read-only
Maximum file size to be compressed [Byte], Values: 1-2000000000, 0-Unlimited
                               slbNewAcclCfgCompPolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.7 displaystring read-only
URL list which is associated with this policy.
                               slbNewAcclCfgCompPolBrwsList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.8 displaystring read-only
Browser list which is associated with this policy.
                               slbNewAcclCfgCompPolPreDefBrwsRuleList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.9 integer read-only
Enable/Disable predefined browser exceptions rule-list. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCompPolCompsrv 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.10 integer read-only
Enable/Disable compression by real server. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCompPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.11 integer read-only
Status (enable/disable) of compression policy. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCompPolDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.12 integer read-only
Delete compression policy. Enumeration: 'other': 1, 'delete': 2.
                       slbCurAcclCfgCompUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5 no-access
The table for configuring compression URL LIST.
                           slbCurAcclCfgCompUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1 no-access
A row in the compression URL LIST table.
                               slbCurAcclCfgCompUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.1 displaystring read-only
The compression policy URL LIST (key id) as an index.
                               slbCurAcclCfgCompUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.2 displaystring read-only
Compression URL LIST name.
                               slbCurAcclCfgCompUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.3 integer read-only
Status (enable/disable) of compression URL LIST. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCompUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6 no-access
The table for configuring compression URL LIST.
                           slbNewAcclCfgCompUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1 no-access
A row in the compression URL LIST table.
                               slbNewAcclCfgCompUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.1 displaystring read-only
The compression policy URL LIST (key id) as an index.
                               slbNewAcclCfgCompUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.2 displaystring read-only
Compression URL LIST name.
                               slbNewAcclCfgCompUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.3 integer read-only
Status (enable/disable) of compression URL LIST. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCompUrlListDel 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.4 integer read-only
Delete Compression URL list. Enumeration: 'other': 1, 'delete': 2.
                               slbNewAcclCfgCompUrlListCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.5 displaystring read-only
Duplicating an entire Rule-List by defining the destination Rule-list id.
                       slbCurAcclCfgCompUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7 no-access
The table for configuring compression URL Rules.
                           slbCurAcclCfgCompUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1 no-access
A row in the compression URL Rule table.
                               slbCurAcclCfgCompUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.1 displaystring read-only
The compression URL LIST (key id) as an index.
                               slbCurAcclCfgCompUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.2 integer read-only
The compression URL Rule number as an index.
                               slbCurAcclCfgCompUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.3 displaystring read-only
The compression URL Rule name.
                               slbCurAcclCfgCompUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.4 integer read-only
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                               slbCurAcclCfgCompUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.5 displaystring read-only
Defines the Virtual Host for which this rule applies.
                               slbCurAcclCfgCompUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.6 integer read-only
Defines whether URL matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                               slbCurAcclCfgCompUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.7 displaystring read-only
Defines URL of specific object (file/folder) to be matched by this rule.
                               slbCurAcclCfgCompUrlRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.8 integer read-only
Enable/Disable the compression. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurAcclCfgCompUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.9 integer read-only
Status (enable/disable) of compression URL Rule. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCompUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8 no-access
The table for configuring compression URL Rules.
                           slbNewAcclCfgCompUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1 no-access
A row in the compression URL Rule table.
                               slbNewAcclCfgCompUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.1 displaystring read-only
The compression URL LIST (key id) as an index.
                               slbNewAcclCfgCompUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.2 integer read-only
The compression URL Rule number as an index.
                               slbNewAcclCfgCompUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.3 displaystring read-only
The compression URL Rule name.
                               slbNewAcclCfgCompUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.4 integer read-only
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                               slbNewAcclCfgCompUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.5 displaystring read-only
Defines the Virtual Host for which this rule applies.
                               slbNewAcclCfgCompUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.6 integer read-only
Defines whether URL matching should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                               slbNewAcclCfgCompUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.7 displaystring read-only
Defines URL of specific object (file/folder) to be matched by this rule.
                               slbNewAcclCfgCompUrlRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.8 integer read-only
Enable/Disable the compression. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCompUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.9 integer read-only
Status (enable/disable) of compression URL Rule. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewAcclCfgCompUrlRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.10 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                               slbNewAcclCfgCompUrlRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.11 displaystring read-only
Copy rule to another index in the same rule-list.
                       slbCurAcclCfgCompBrwsListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9 no-access
The table for configuring compression browser LIST.
                           slbCurAcclCfgCompBrwsListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1 no-access
A row in the compression browser LIST table.
                               slbCurAcclCfgCompBrwsListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.1 displaystring read-only
The compression policy browser LIST (key id) as an index.
                               slbCurAcclCfgCompBrwsListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.2 displaystring read-only
Compression browser list name.
                               slbCurAcclCfgCompBrwsListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.3 integer read-only
Status (enable/disable) of compression browser list. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCompBrwsListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10 no-access
The table for configuring compression browser list.
                             slbNewAcclCfgCompBrwsListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1 no-access
A row in the compression browser list table.
                                 slbNewAcclCfgCompBrwsListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.1 displaystring read-only
The compression policy browser list (key id) as an index.
                                 slbNewAcclCfgCompBrwsListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.2 displaystring read-only
Compression browser list name.
                                 slbNewAcclCfgCompBrwsListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.3 integer read-only
Status (enable/disable) of compression browser list. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewAcclCfgCompBrwsListDel 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.4 integer read-only
Delete Compression Browser list. Enumeration: 'other': 1, 'delete': 2.
                                 slbNewAcclCfgCompBrwsListCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.5 displaystring read-only
Duplicating an entire browser list by defining the destination browser list id.
                       slbCurAcclCfgCompBrwsRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11 no-access
The table for configuring compression browser Rules.
                             slbCurAcclCfgCompBrwsRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1 no-access
A row in the compression browser Rule table.
                                 slbCurAcclCfgCompBrwsRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.1 displaystring read-only
The compression browser list (key id) as an index.
                                 slbCurAcclCfgCompBrwsRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.2 integer read-only
The compression browser Rule number as an index.
                                 slbCurAcclCfgCompBrwsRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.3 displaystring read-only
The compression browser Rule name.
                                 slbCurAcclCfgCompBrwsRuleAgentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.4 integer read-only
Defines whether user agent field should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                                 slbCurAcclCfgCompBrwsRuleAgent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.5 displaystring read-only
Defines the User-Agent string for which this rule applies.
                                 slbCurAcclCfgCompBrwsRuleContentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.6 integer read-only
Defines whether content type should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                                 slbCurAcclCfgCompBrwsRuleContent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.7 displaystring read-only
Defines the Content-type string for which this rule applies.
                                 slbCurAcclCfgCompBrwsRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.8 integer read-only
Enable/Disable the compression. Defines if the matched response should be compressed or not Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurAcclCfgCompBrwsRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.9 integer read-only
Status (enable/disable) of compression browser Rule. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewAcclCfgCompBrwsRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12 no-access
The table for configuring compression browser Rules.
                             slbNewAcclCfgCompBrwsRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1 no-access
A row in the compression browser Rule table.
                                 slbNewAcclCfgCompBrwsRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.1 displaystring read-only
The compression browser list (key id) as an index.
                                 slbNewAcclCfgCompBrwsRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.2 integer read-only
The compression browser Rule number as an index.
                                 slbNewAcclCfgCompBrwsRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.3 displaystring read-only
The compression browser Rule name.
                                 slbNewAcclCfgCompBrwsRuleAgentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.4 integer read-only
Defines whether user agent field should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                                 slbNewAcclCfgCompBrwsRuleAgent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.5 displaystring read-only
Defines the User-Agent string for which this rule applies.
                                 slbNewAcclCfgCompBrwsRuleContentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.6 integer read-only
Defines whether content type should be evaluated as String, Regex or match, any (default any). Enumeration: 'regex': 3, 'text': 2, 'any': 1.
                                 slbNewAcclCfgCompBrwsRuleContent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.7 displaystring read-only
Defines the Content-type string for which this rule applies.
                                 slbNewAcclCfgCompBrwsRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.8 integer read-only
Enable/Disable the compression. Defines if the matched response should be compressed or not Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewAcclCfgCompBrwsRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.9 integer read-only
Status (enable/disable) of compression browser Rule. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewAcclCfgCompBrwsRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.10 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                                 slbNewAcclCfgCompBrwsRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.11 integer read-only
Copy rule to another index in the same rule-list.
             sslCfg 1.3.6.1.4.1.1872.2.5.4.1.1.19
                   slbCurSslCfgSSLAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.1 integer read-only
Status (enable/disable) of SSL policy. Enumeration: 'disabled': 2, 'enabled': 1.
                   slbNewSslCfgSSLAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.2 integer read-only
Status (enable/disable) of SSL policy. Enumeration: 'disabled': 2, 'enabled': 1.
                   sslPol 1.3.6.1.4.1.1872.2.5.4.1.1.19.3
                       slbCurSslCfgSSLPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5 no-access
The table for configuring ssl policy.
                           slbCurSslCfgSSLPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1 no-access
A row in the ssl policy table.
                               slbCurSslCfgSSLPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.1 displaystring read-only
The SSL policy name(key id) as an index.
                               slbCurSslCfgSSLPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.2 displaystring read-only
SSL policy name.
                               slbCurSslCfgSSLPolPassInfoCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.3 displaystring read-only
The SSL cipher-suite header name.
                               slbCurSslCfgSSLPolPassInfoCipherFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.4 integer read-only
SSL cipher-suite information to backend servers enabled.
                               slbCurSslCfgSSLPolPassInfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.5 displaystring read-only
SSL version header name.
                               slbCurSslCfgSSLPolPassInfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.6 integer read-only
SSL version information to backend servers enabled.
                               slbCurSslCfgSSLPolPassInfoHeadBitsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.7 displaystring read-only
The passive cipher bits information to backend server.
                               slbCurSslCfgSSLPolPassInfoHeadBitsFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.8 integer read-only
Cipher bits information to backend servers enabled.
                               slbCurSslCfgSSLPolPassInfoFrontend 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.9 integer read-only
Enable/Disable add Front-End-Https: on header.
                               slbCurSslCfgSSLPolCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.10 integer read-only
Cipher name for SSL.
                               slbCurSslCfgSSLPolCipherUserdef 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.11 displaystring read-only
Cipher-suite allowed for SSL.
                               slbCurSslCfgSSLPolIntermcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.12 displaystring read-only
Intermediate CA certificate chain name.
                               slbCurSslCfgSSLPolIntermcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.13 displaystring read-only
Intermediate CA certificate chain type certificate=cert,Group=group,None=.
                               slbCurSslCfgSSLPolBecipher 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.14 integer read-only
Allowed cipher-suites in backend SSL [0-low, 1-midium, 2-high] . Enumeration: 'high': 2, 'medium': 1, 'low': 0.
                               slbCurSslCfgSSLPolAuthpol 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.15 displaystring read-only
Client authentication policy.
                               slbCurSslCfgSSLPolConvuri 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.16 displaystring read-only
Host regex for HTTP redirection conversion.
                               slbCurSslCfgSSLPolBessl 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.17 integer read-only
Enable/Disable backend SSL encryption. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurSslCfgSSLPolConvert 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.18 integer read-only
Enable/Disable HTTP redirection conversion. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurSslCfgSSLPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.19 integer read-only
Enable or disable ssl policy. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewSslCfgSSLPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7 no-access
The table for configuring ssl policy.
                           slbNewSslCfgSSLPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1 no-access
A row in the ssl policy table.
                               slbNewSslCfgSSLPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.1 displaystring read-only
The SSL policy name(key id) as an index.
                               slbNewSslCfgSSLPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.2 displaystring read-only
SSL policy name,length of the string should be 32 charecters.
                               slbNewSslCfgSSLPolPassInfoCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.3 displaystring read-only
The SSL cipher-suite header name.
                               slbNewSslCfgSSLPolPassInfoCipherFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.4 integer read-only
Enable/Disable cipher-suite information to backend servers. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolPassInfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.5 displaystring read-only
SSL version header name.
                               slbNewSslCfgSSLPolPassInfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.6 integer read-only
Enable/Disable SSL version information to backend servers. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolPassInfoHeadBitsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.7 displaystring read-only
The passive cipher bits information to backend server.
                               slbNewSslCfgSSLPolPassInfoHeadBitsFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.8 integer read-only
Enable/Disable Cipher bits information to backend servers. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolPassInfoFrontend 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.9 integer read-only
Enable/Disable add Front-End-Https: on header. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.10 integer read-only
Cipher name for SSL.
                               slbNewSslCfgSSLPolCipherUserdef 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.11 displaystring read-only
Cipher-suite allowed for SSL.
                               slbNewSslCfgSSLPolIntermcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.12 displaystring read-only
Intermediate CA certificate chain name.
                               slbNewSslCfgSSLPolIntermcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.13 displaystring read-only
Intermediate CA certificate chain type certificate=cert,Group=group,None=.
                               slbNewSslCfgSSLPolBecipher 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.14 integer read-only
Allowed cipher-suites in backend SSL [0-low, 1-midium, 2-high]. Enumeration: 'high': 2, 'medium': 1, 'low': 0.
                               slbNewSslCfgSSLPolAuthpol 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.15 displaystring read-only
Client authentication policy.
                               slbNewSslCfgSSLPolConvuri 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.16 displaystring read-only
Host regex for HTTP redirection conversion.
                               slbNewSslCfgSSLPolBessl 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.17 integer read-only
Enable/Disable backend SSL encryption. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolConvert 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.18 integer read-only
Enable/Disable HTTP redirection conversion. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.19 integer read-only
Enable or disable ssl policy. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgSSLPolDel 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.20 integer read-only
Delete SSL policy. Enumeration: 'other': 1, 'delete': 2.
                   authPol 1.3.6.1.4.1.1872.2.5.4.1.1.19.4
                       slbCurSslCfgAuthPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1 no-access
The table for configuring Client Authentication policy.
                           slbCurSslCfgAuthPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1 no-access
A row in the Client Authentication policy table.
                               slbCurSslCfgAuthPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.1 displaystring read-only
The Auth policy name(key id) as an index.
                               slbCurSslCfgAuthPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.2 displaystring read-only
Auth policy name.
                               slbCurSslCfgAuthPolValidityMethod 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.3 integer read-only
Certificate validation check method.
                               slbCurSslCfgAuthPolValidityStaturi 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.4 displaystring read-only
Static URI for OCSP validation requests.
                               slbCurSslCfgAuthPolValidityUriprior 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.5 integer read-only
OCSP URI priority. Enumeration: 'staticuri': 2, 'clientcert': 1.
                               slbCurSslCfgAuthPolValidityCachtime 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.6 integer read-only
OCSP response cache time.
                               slbCurSslCfgAuthPolValidityTimedev 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.7 integer read-only
OCSP response time deviation.
                               slbCurSslCfgAuthPolValidityAlgorthmName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.8 displaystring read-only
Allowed signing algorithm for the OCSP response[all, md5, sha1, sha256, sha384, sha512].
                               slbCurSslCfgAuthPolValidityVchain 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.9 integer read-only
Enable/Disable validating every CA certificate in the CA chain u. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurSslCfgAuthPolValiditySecure 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.10 integer read-only
Enable/Disable secure OCSP response by sending random nonce with. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurSslCfgAuthPolPassinfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.11 displaystring read-only
Certificate version header.
                               slbCurSslCfgAuthPolPassinfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.12 integer read-only
Pass certificate version information to backend server?.
                               slbCurSslCfgAuthPolPassinfoSerialName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.13 displaystring read-only
Certificate serial-number header .
                               slbCurSslCfgAuthPolPassinfoSerialFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.14 integer read-only
Pass certificate serial-number to backend server?.
                               slbCurSslCfgAuthPolPassinfoAlgoName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.15 displaystring read-only
Certificate signature algorithm header name.
                               slbCurSslCfgAuthPolPassinfoAlgoFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.16 integer read-only
Pass certificate Signature Algorithm to backend server?
                               slbCurSslCfgAuthPolPassinfoIssuerName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.17 displaystring read-only
Certificate issuer header.
                               slbCurSslCfgAuthPolPassinfoIssuerFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.18 integer read-only
Pass certificate issuer information to backend server?
                               slbCurSslCfgAuthPolPassinfoNbeforeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.19 displaystring read-only
Certificate 'Not Before Validity Dates' header.
                               slbCurSslCfgAuthPolPassinfoNbeforeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.20 integer read-only
Pass certificate 'Not Before' Validity Date to backend serverr?
                               slbCurSslCfgAuthPolPassinfoNafterName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.21 displaystring read-only
Certificate 'Not After Validity Dates' header.
                               slbCurSslCfgAuthPolPassinfoNafterFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.22 integer read-only
Pass certificate 'Not After' Validity Date to backend server?
                               slbCurSslCfgAuthPolPassinfoSubjectName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.23 displaystring read-only
Certificate subject header name.
                               slbCurSslCfgAuthPolPassinfoSubjectFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.24 integer read-only
Pass certificate subject to backend server?
                               slbCurSslCfgAuthPolPassinfoKeytypeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.25 displaystring read-only
Certificate Public Key Type header.
                               slbCurSslCfgAuthPolPassinfoKeytypeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.26 integer read-only
Pass certificate Public Key Type information to backend servers?
                               slbCurSslCfgAuthPolPassinfoMd5Name 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.27 displaystring read-only
Certificate MD5 Hash header.
                               slbCurSslCfgAuthPolPassinfoMd5Flag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.28 integer read-only
Pass certificate MD5 Hash information to backend servers?
                               slbCurSslCfgAuthPolPassinfoCertName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.29 displaystring read-only
Certificate header.
                               slbCurSslCfgAuthPolPassinfoCertFormat 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.30 integer read-only
Certificate Header Lines Format.
                               slbCurSslCfgAuthPolPassinfoCertFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.31 integer read-only
Pass certificate information to backend servers?
                               slbCurSslCfgAuthPolPassinfoCharset 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.32 integer read-only
Set the character set to be used for information.
                               slbCurSslCfgAuthPolTrustcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.33 displaystring read-only
Trusted client's CA certificate.
                               slbCurSslCfgAuthPolTrustcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.34 displaystring read-only
Tusted client's CA certificate type certificate=cert,Group=group,None=.
                               slbCurSslCfgAuthPolCadepth 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.35 integer read-only
Maximum depth to search the trusted CA in the CA certificate.
                               slbCurSslCfgAuthPolCaverify 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.36 integer read-only
Certificate's CA verification level.
                               slbCurSslCfgAuthPolFailurl 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.37 displaystring read-only
URL for redirection when client authentication fails
                               slbCurSslCfgAuthPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.38 integer read-only
Enable or disable Auth policy. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurSslCfgAuthPolPassinfoComp2424 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.39 integer read-only
Enable/Disable the 2424SSL Headers Compliance Mode. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewSslCfgAuthPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3 no-access
The table for configuring Client Authentication policy.
                           slbNewSslCfgAuthPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1 no-access
A row in the Client Authentication policy table.
                               slbNewSslCfgAuthPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.1 displaystring read-only
The Auth policy name(key id) as an index.
                               slbNewSslCfgAuthPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.2 displaystring read-only
Auth policy name.
                               slbNewSslCfgAuthPolValidityMethod 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.3 integer read-only
Certificate validation check method.
                               slbNewSslCfgAuthPolValidityStaturi 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.4 displaystring read-only
Static URI for OCSP validation requests.
                               slbNewSslCfgAuthPolValidityUriprior 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.5 integer read-only
OCSP URI priority. Enumeration: 'staticuri': 2, 'clientcert': 1.
                               slbNewSslCfgAuthPolValidityCachtime 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.6 integer read-only
OCSP response cache time.
                               slbNewSslCfgAuthPolValidityTimedev 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.7 integer read-only
OCSP response time deviation.
                               slbNewSslCfgAuthPolValidityAlgorthmName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.8 displaystring read-only
Allowed signing algorithm for the OCSP response [all, md5, sha1, sha256, sha384, sha512].
                               slbNewSslCfgAuthPolValidityVchain 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.9 integer read-only
Enable/Disable validating every CA certificate in the CA chain u. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolValiditySecure 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.10 integer read-only
Enable/Disable secure OCSP response by sending random nonce with. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.11 displaystring read-only
Certificate version header.
                               slbNewSslCfgAuthPolPassinfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.12 integer read-only
Pass certificate version information to backend server?. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoSerialName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.13 displaystring read-only
Certificate serial-number header.
                               slbNewSslCfgAuthPolPassinfoSerialFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.14 integer read-only
Pass certificate serial-number to backend server? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoAlgoName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.15 displaystring read-only
Certificate signature algorithm header name.
                               slbNewSslCfgAuthPolPassinfoAlgoFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.16 integer read-only
Pass certificate Signature Algorithm to backend server? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoIssuerName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.17 displaystring read-only
Certificate issuer header.
                               slbNewSslCfgAuthPolPassinfoIssuerFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.18 integer read-only
Pass certificate issuer information to backend server? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoNbeforeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.19 displaystring read-only
Certificate 'Not Before Validity Dates' header.
                               slbNewSslCfgAuthPolPassinfoNbeforeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.20 integer read-only
Pass certificate 'Not Before' Validity Date to backend serverr? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoNafterName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.21 displaystring read-only
Certificate 'Not After Validity Dates' header.
                               slbNewSslCfgAuthPolPassinfoNafterFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.22 integer read-only
Pass certificate 'Not After' Validity Date to backend server? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoSubjectName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.23 displaystring read-only
Certificate subject header name.
                               slbNewSslCfgAuthPolPassinfoSubjectFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.24 integer read-only
Pass certificate subject to backend server? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoKeytypeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.25 displaystring read-only
Certificate Public Key Type header.
                               slbNewSslCfgAuthPolPassinfoKeytypeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.26 integer read-only
Pass certificate Public Key Type information to backend servers? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoMd5Name 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.27 displaystring read-only
Certificate MD5 Hash header.
                               slbNewSslCfgAuthPolPassinfoMd5Flag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.28 integer read-only
Pass certificate MD5 Hash information to backend servers? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoCertName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.29 displaystring read-only
Certificate header.
                               slbNewSslCfgAuthPolPassinfoCertFormat 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.30 integer read-only
Certificate Header Lines Format.
                               slbNewSslCfgAuthPolPassinfoCertFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.31 integer read-only
Pass certificate information to backend servers? Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolPassinfoCharset 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.32 integer read-only
Set the character set to be used for information.
                               slbNewSslCfgAuthPolTrustcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.33 displaystring read-only
Trusted client's CA certificate name.
                               slbNewSslCfgAuthPolTrustcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.34 displaystring read-only
Trusted client's CA certificate type certificate=cert,Group=group,None=.
                               slbNewSslCfgAuthPolCadepth 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.35 integer read-only
Maximum depth to search the trusted CA in the CA certificate.
                               slbNewSslCfgAuthPolCaverify 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.36 integer read-only
Certificate's CA verification level.
                               slbNewSslCfgAuthPolFailurl 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.37 displaystring read-only
URL for redirection when client authentication fails
                               slbNewSslCfgAuthPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.38 integer read-only
Enable or disable Auth policy. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewSslCfgAuthPolDelete 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.39 integer read-only
Delete Client Authentication Policy. Enumeration: 'other': 1, 'delete': 2.
                               slbNewSslCfgAuthPolPassinfoComp2424 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.40 integer read-only
Enable/Disable the 2424SSL Headers Compliance Mode. Enumeration: 'disabled': 2, 'enabled': 1.
                   certs 1.3.6.1.4.1.1872.2.5.4.1.1.19.5
                       slbCurSslCfgCertsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1 no-access
.
                           slbCurSslCfgCertsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1 no-access
.
                               slbCurSslCfgCertsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.1 displaystring read-only
.
                               slbCurSslCfgCertsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.2 integer read-only
. Enumeration: 'certificateRequest': 2, 'intermediateCertificate': 5, 'trustedCertificate': 4, 'key': 1, 'serverCertificate': 3.
                               slbCurSslCfgCertsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.3 displaystring read-only
.
                               slbCurSslCfgCertsKeySize 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.4 integer read-only
. Enumeration: 'unknown': 6, 'ks4096': 4, 'ks1024': 2, 'ks2048': 3, 'ks512': 1.
                               slbCurSslCfgCertsExpirty 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.5 displaystring read-only
.
                               slbCurSslCfgCertsCommonName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.6 displaystring read-only
.
                               slbCurSslCfgCertsHashAlgo 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.7 integer read-only
. Enumeration: 'sha1': 2, 'unknown': 6, 'sha384': 4, 'sha256': 3, 'sha512': 5, 'md5': 1.
                               slbCurSslCfgCertsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.8 displaystring read-only
.
                               slbCurSslCfgCertsPrpvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.9 displaystring read-only
.
                               slbCurSslCfgCertsLocalityName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.10 displaystring read-only
.
                               slbCurSslCfgCertsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.11 displaystring read-only
.
                               slbCurSslCfgCertsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.12 displaystring read-only
.
                               slbCurSslCfgCertsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.13 displaystring read-only
.
                               slbCurSslCfgCertsValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.14 integer read-only
.
                               slbCurSslCfgCertsStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.15 integer read-only
Shows if the current certificate is generated. Enumeration: 'generated': 1, 'notGenerated': 2.
                       slbNewSslCfgCertsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2 no-access
.
                           slbNewSslCfgCertsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1 no-access
.
                               slbNewSslCfgCertsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.1 displaystring read-only
.
                               slbNewSslCfgCertsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.2 integer read-only
. Enumeration: 'certificateRequest': 2, 'intermediateCertificate': 5, 'trustedCertificate': 4, 'key': 1, 'serverCertificate': 3.
                               slbNewSslCfgCertsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.3 displaystring read-write
.
                               slbNewSslCfgCertsKeySize 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.4 integer read-only
. Enumeration: 'unknown': 6, 'ks4096': 4, 'ks1024': 2, 'ks2048': 3, 'ks512': 1.
                               slbNewSslCfgCertsExpirty 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.5 displaystring read-only
.
                               slbNewSslCfgCertsCommonName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.6 displaystring read-only
.
                               slbNewSslCfgCertsHashAlgo 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.7 integer read-only
. Enumeration: 'sha1': 2, 'unknown': 6, 'sha384': 4, 'sha256': 3, 'sha512': 5, 'md5': 1.
                               slbNewSslCfgCertsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.8 displaystring read-only
.
                               slbNewSslCfgCertsPrpvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.9 displaystring read-only
.
                               slbNewSslCfgCertsLocalityName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.10 displaystring read-only
.
                               slbNewSslCfgCertsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.11 displaystring read-only
.
                               slbNewSslCfgCertsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.12 displaystring read-only
.
                               slbNewSslCfgCertsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.13 displaystring read-only
.
                               slbNewSslCfgCertsValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.14 integer read-only
.
                               slbNewSslCfgCertsDelete 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.15 integer read-write
Delete certificate. Enumeration: 'other': 1, 'delete': 2.
                               slbNewSslCfgCertsGenerate 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.16 integer read-write
By setting the value to generate(2), the Certicicate will be generated. Enumeration: 'other': 1, 'generate': 2.
                               slbNewSslCfgCertsStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.17 integer read-only
Shows if the current certificate is generated. Enumeration: 'generated': 1, 'inProgress': 3, 'notGenerated': 2.
                       slbSslCfgCertsDefaults 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3
                           slbCurSslCfgCertsDefaultsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.1 displaystring read-only
SSL certificate Country Name in 2 letter code.
                           slbNewSslCfgCertsDefaultsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.2 displaystring read-write
SSL certificate Country Name in 2 letter code.
                           slbCurSslCfgCertsDefaultsProvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.3 displaystring read-only
SSL Certificate State or Province Name.
                           slbNewSslCfgCertsDefaultsProvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.4 displaystring read-write
SSL Certificate State or Province Name.
                           slbCurSslCfgCertsDefaultsLocallyName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.5 displaystring read-only
SSL certificate locality name (e.g. city).
                           slbNewSslCfgCertsDefaultsLocallyName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.6 displaystring read-write
SSL certificate locality name (e.g. city).
                           slbCurSslCfgCertsDefaultsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.7 displaystring read-only
SSL certificate Organization Name (e.g. company).
                           slbNewSslCfgCertsDefaultsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.8 displaystring read-write
SSL certificate Organization Name (e.g. company).
                           slbCurSslCfgCertsDefaultsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.9 displaystring read-only
SSL certificate Organizational Unit Name (e.g. accounting).
                           slbNewSslCfgCertsDefaultsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.10 displaystring read-write
SSL certificate Organizational Unit Name (e.g. accounting).
                           slbCurSslCfgCertsDefaultsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.11 displaystring read-only
SSL certificate Email (e.g. admin@company.com).
                           slbNewSslCfgCertsDefaultsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.12 displaystring read-write
SSL certificate Email (e.g. admin@company.com).
                       slbCurSslCfgGroupsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4 no-access
.
                           slbCurSslCfgGroupsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1 no-access
.
                               slbCurSslCfgGroupsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.1 displaystring read-only
.
                               slbCurSslCfgGroupsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.2 displaystring read-only
.
                               slbCurSslCfgGroupsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.3 integer read-only
. Enumeration: 'intermediateCertificate': 5, 'trustedCertificate': 4, 'serverCertificate': 3.
                               slbCurSslCfgGroupsDefaultCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.4 displaystring read-only
.
                               slbCurSslCfgGroupsCertBmap 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.5 octet string read-only
List of Certificates the group holds - Selected certificates are presented in a bitmap format. Receiving order is as: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Cert 9 || || || ||___ Cert 4 || |____ Cert 3 || . . . ||_________ Cert 2 |__________ Cert 1 where x : 1 - The represented certficate is selected 0 - The represented certificate is not selected.
                       slbNewSslCfgGroupsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5 no-access
.
                           slbNewSslCfgGroupsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1 no-access
.
                               slbNewSslCfgGroupsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.1 displaystring read-only
.
                               slbNewSslCfgGroupsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.2 displaystring read-write
.
                               slbNewSslCfgGroupsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.3 integer read-write
. Enumeration: 'intermediateCertificate': 5, 'trustedCertificate': 4, 'serverCertificate': 3.
                               slbNewSslCfgGroupsDelete 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.4 integer read-write
Delete certificate group. Enumeration: 'other': 1, 'delete': 2.
                               slbNewSslCfgGroupsDefaultCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.5 displaystring read-write
.
                               slbNewSslCfgGroupsAddCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.6 displaystring read-write
Add cerificate to the group
                               slbNewSslCfgGroupsRemCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.7 displaystring read-write
Remove cerificate from the group
                               slbNewSslCfgGroupsCertBmap 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.8 octet string read-only
List of Certificates the group holds - Selected certificates are presented in a bitmap format. Receiving order is as: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Cert 9 || || || ||___ Cert 4 || |____ Cert 3 || . . . ||_________ Cert 2 |__________ Cert 1 where x : 1 - The represented certficate is selected 0 - The represented certificate is not selected.
             sapCfg 1.3.6.1.4.1.1872.2.5.4.1.1.20
                   slbSapAslrTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.20.1 integer32 read-only
The maximum number of entries in SAP ASLR connection management table.
                   slbCurCfgSapAslrTable 1.3.6.1.4.1.1872.2.5.4.1.1.20.2 no-access
The SAP ASLR connection management table.
                       slbCurCfgSapAslrEntry 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1 no-access
A row in the SAP ASLR connection management table.
                           slbCurCfgSapAslrIndex 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.1 integer32 read-only
The Sap Aslr number
                           slbCurCfgSapAslrIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.2 ipaddress read-only
IP address of the Sap Aslr identified by the instance of the slbCurCfgSapAslrIndex.
                           slbCurCfgSapAslrIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.3 displaystring read-only
IPV6 address of the Sap Aslr manager identified by the instance of the slbCurCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbCurCfgSapAslrIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.4 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                           slbCurCfgSapAslrPortNum 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.5 integer read-only
The Sap Aslr service port number.
                           slbCurCfgSapAslrVipAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.6 ipaddress read-only
IP address of the VIP identified by the instance of the slbNewCfgSapAslrIndex.
                           slbCurCfgSapAslrVipv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.7 displaystring read-only
IPV6 address of the VIP identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbCurCfgSapAslrVipIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.8 integer read-only
The type of VIP IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                           slbCurCfgSapAslrInterval 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.9 integer read-only
Set the Sap Aslr server inspection interval.
                           slbCurCfgSapAslrState 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.10 integer read-only
Enable or disable the Sap Aslr server sampling. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbCurCfgSapAslrName 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.11 displaystring read-only
The name of the Sap Aslr connection.
                           slbCurCfgSapAslrLastAct 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.12 displaystring read-only
The Sap Aslr connection last activity time stamp.
                           slbCurCfgSapAslrAutoConfig 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.13 integer read-only
Defines the configuration update process. When set the value to basic (1), the configuration is limited, comparing to full (2) Enumeration: 'full': 2, 'basic': 1.
                           slbCurCfgSapAslrSessionInfo 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.14 integer read-only
Set the Sap Aslr session information. When read, zero is returned.
                           slbCurCfgSapAslrDelete 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.15 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                           slbCurCfgSapAslrSignature 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.16 displaystring read-only
The Sap Aslr connection signature.
                           slbCurCfgSapAslrServCert 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.17 displaystring read-only
Server Certificate name associated with this virtual service.
                   slbNewCfgSapAslrTable 1.3.6.1.4.1.1872.2.5.4.1.1.20.3 no-access
The SAP ASLR connection management table.
                       slbNewCfgSapAslrEntry 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1 no-access
A row in the SAP ASLR connection management table.
                           slbNewCfgSapAslrIndex 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.1 integer32 read-only
The Sap Aslr number
                           slbNewCfgSapAslrIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.2 ipaddress read-only
IP address of the Sap Aslr identified by the instance of the slbNewCfgSapAslrIndex.
                           slbNewCfgSapAslrIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.3 displaystring read-only
IPV6 address of the Sap Aslr manager identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbNewCfgSapAslrIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.4 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                           slbNewCfgSapAslrPortNum 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.5 integer read-only
The Sap Aslr service port number.
                           slbNewCfgSapAslrVipAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.6 ipaddress read-only
IP address of the VIP identified by the instance of the slbNewCfgSapAslrIndex.
                           slbNewCfgSapAslrVipv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.7 displaystring read-only
IPV6 address of the VIP identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbNewCfgSapAslrVipIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.8 integer read-only
The type of VIP IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                           slbNewCfgSapAslrInterval 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.9 integer read-only
Set the Sap Aslr server inspection interval.
                           slbNewCfgSapAslrState 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.10 integer read-only
Enable or disable the Sap Aslr server sampling. Enumeration: 'disabled': 2, 'enabled': 1.
                           slbNewCfgSapAslrName 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.11 displaystring read-only
The name of the Sap Aslr connection.
                           slbNewCfgSapAslrLastAct 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.12 displaystring read-only
The Sap Aslr last activity time stamp.
                           slbNewCfgSapAslrAutoConfig 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.13 integer read-only
Defines the configuration update process. When set the value to basic (1), the configuration is limited, comparing to full (2) Enumeration: 'full': 2, 'basic': 1.
                           slbNewCfgSapAslrSessionInfo 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.14 integer read-only
Set the Sap Aslr session information. When read, zero is returned.
                           slbNewCfgSapAslrDelete 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.15 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                           slbNewCfgSapAslrSignature 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.16 displaystring read-only
The Sap Aslr connection signature.
                           slbNewCfgSapAslrServCert 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.17 displaystring read-only
Server Certificate name associated with this virtual service.
             peerpipTblCfg 1.3.6.1.4.1.1872.2.5.4.1.1.21
                   slbCurCfgPeerPIPTable 1.3.6.1.4.1.1872.2.5.4.1.1.21.1 no-access
The table of Peer PIP configuration in the current_config.
                       slbCurCfgPeerPIPEntry 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1 no-access
Information about Peer PIP configuration.
                           slbCurCfgPeerPIPIndex 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.1 integer32 read-only
The index for peer PIP.
                           slbCurCfgPeerPIPAddr 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.2 ipaddress read-only
The IP address of the peer PIP.
                           slbCurCfgPeerPIPv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.3 displaystring read-only
The IPv6 address of the Peer PIP. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                   slbNewCfgPeerPIPTable 1.3.6.1.4.1.1872.2.5.4.1.1.21.2 no-access
The table of Peer PIP configuration in the new_config.
                       slbNewCfgPeerPIPEntry 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1 no-access
Information about Peer PIP configuration.
                           slbNewCfgPeerPIPIndex 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.1 integer32 read-only
The index for peer PIP.
                           slbNewCfgPeerPIPAddr 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.2 ipaddress read-only
The IP address of the peer PIP.
                           slbNewCfgPeerPIPv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.3 displaystring read-only
The IPv6 address of the Peer PIP. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbNewCfgPeerPIPDelete 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
             nwclssCfg 1.3.6.1.4.1.1872.2.5.4.1.1.22
                   slbCurNwclssCfgNetworkClassesTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.1 no-access
Current network classes table.
                       slbCurNwclssCfgNetworkClassesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1 no-access
A row in the network classes table.
                           slbCurNwclssCfgNetworkClassesId 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.1 displaystring read-only
Network class id.
                           slbCurNwclssCfgNetworkClassesName 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.2 displaystring read-only
Network class name.
                           slbCurNwclssCfgNetworkClassesIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.3 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                   slbNewNwclssCfgNetworkClassesTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.2 no-access
New network classes table.
                       slbNewNwclssCfgNetworkClassesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1 no-access
A row in the new network classes table.
                           slbNewNwclssCfgNetworkClassesId 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.1 displaystring read-only
Network class id.
                           slbNewNwclssCfgNetworkClassesName 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.2 displaystring read-only
Network class name.
                           slbNewNwclssCfgNetworkClassesIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.3 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                           slbNewNwclssCfgNetworkClassesDel 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                           slbNewNwclssCfgNetworkClassesCopy 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.5 displaystring read-only
Duplicating an entire Network class by defining the destination Network class id.
                   slbCurNwclssCfgNetworkElementsTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.3 no-access
Current network elements table.
                       slbCurNwclssCfgNetworkElementsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1 no-access
A row in the network elements table.
                           slbCurNwclssCfgNetworkElementsNcId 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.1 displaystring read-only
Id of network class which owns network element.
                           slbCurNwclssCfgNetworkElementsId 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.2 displaystring read-only
Network element id.
                           slbCurNwclssCfgNetworkElementsNetType 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.3 integer read-only
The type of network. Enumeration: 'subnet': 1, 'range': 2.
                           slbCurNwclssCfgNetworkElementsIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.4 ipaddress read-only
IPv4 address of network element.
                           slbCurNwclssCfgNetworkElementsMask 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.5 ipaddress read-only
Subnet mask of network element.
                           slbCurNwclssCfgNetworkElementsFromIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.6 ipaddress read-only
From IP address of network element.
                           slbCurNwclssCfgNetworkElementsToIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.7 ipaddress read-only
To IP address of network element.
                           slbCurNwclssCfgNetworkElementsIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.8 displaystring read-only
The IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbCurNwclssCfgNetworkElementsPrefixLen 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.9 integer read-only
The prefix length associated with the network IP address .
                           slbCurNwclssCfgNetworkElementsFromIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.10 displaystring read-only
The from IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbCurNwclssCfgNetworkElementsToIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.11 displaystring read-only
The to IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbCurNwclssCfgNetworkElementsMatchType 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.12 integer read-only
The match type of network element. Enumeration: 'exclude': 2, 'include': 1.
                   slbNewNwclssCfgNetworkElementsTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.4 no-access
New network elements table.
                       slbNewNwclssCfgNetworkElementsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1 no-access
A row in the new network elements table.
                           slbNewNwclssCfgNetworkElementsNcId 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.1 displaystring read-only
ID of network class which owns network element.
                           slbNewNwclssCfgNetworkElementsId 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.2 displaystring read-only
Network class ID.
                           slbNewNwclssCfgNetworkElementsNetType 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.3 integer read-only
The type of network. Enumeration: 'subnet': 1, 'range': 2.
                           slbNewNwclssCfgNetworkElementsIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.4 ipaddress read-only
IP address of network element.
                           slbNewNwclssCfgNetworkElementsMask 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.5 ipaddress read-only
Subnet mask of network element.
                           slbNewNwclssCfgNetworkElementsFromIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.6 ipaddress read-only
From IP address of network element.
                           slbNewNwclssCfgNetworkElementsToIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.7 ipaddress read-only
To IP address of network element.
                           slbNewNwclssCfgNetworkElementsIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.8 displaystring read-only
The IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbNewNwclssCfgNetworkElementsPrefixLen 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.9 integer read-only
The prefix length associated with the network IP address .
                           slbNewNwclssCfgNetworkElementsFromIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.10 displaystring read-only
The from IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbNewNwclssCfgNetworkElementsToIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.11 displaystring read-only
The to IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                           slbNewNwclssCfgNetworkElementsMatchType 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.12 integer read-only
The match type of network element. Enumeration: 'exclude': 2, 'include': 1.
                           slbNewNwclssCfgNetworkElementsDel 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.13 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
         filterCfg 1.3.6.1.4.1.1872.2.5.4.1.2
             fltCfgTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.2.1 integer32 read-only
The maximum number of filtering table entries.
             fltCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.2.2 no-access
The filtering table in the current configuration block.
                 fltCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.2.1 no-access
A row in the filtering table.
                     fltCurCfgIndx 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.1 integer32 read-only
The filtering table index.
                     fltCurCfgSrcIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.2 ipaddress read-only
The source IP address to be filtered.
                     fltCurCfgSrcIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.3 ipaddress read-only
The source IP sub-net mask for filtering.
                     fltCurCfgDstIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.4 ipaddress read-only
The destination IP address to be filtered.
                     fltCurCfgDstIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.5 ipaddress read-only
The destination IP sub-net mask for filtering.
                     fltCurCfgProtocol 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.6 integer read-only
The protocol to be filtered.
                     fltCurCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.7 integer read-only
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltCurCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.8 integer read-only
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltCurCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.9 integer read-only
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltCurCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.10 integer read-only
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltCurCfgAction 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.11 integer read-only
The action for the filtering rule. Enumeration: 'redirect': 3, 'deny': 2, 'nat': 4, 'allow': 1, 'goto': 5.
                     fltCurCfgRedirPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.12 integer read-only
The real server port number used for redirection.
                     fltCurCfgRedirGroup 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.13 integer32 read-only
The real server group to be redirected to.
                     fltCurCfgLog 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.14 integer read-only
Enable or disable logging. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgState 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.15 integer read-only
The state of this filtering rule. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgNat 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.16 integer read-only
The selection of destination or source or multicast for network address translation. Enumeration: 'multicast-address': 3, 'destination-address': 1, 'source-address': 2.
                     fltCurCfgCache 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.17 integer read-only
Enable or disable caching sessions that match filter. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.18 integer read-only
Turn the invert logic on or off for the filter entry. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgClientProxy 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.19 integer read-only
Enable or disable client proxy. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.20 integer read-only
Enable or disable filtering on matching TCP ACK and RST flag. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgSrcMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.22 physaddress read-only
The source MAC address to be filtered.
                     fltCurCfgDstMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.23 physaddress read-only
The Destination MAC address to be filtered.
                     fltCurCfgFtpNatActive 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.24 integer read-only
Enable or disable FTP NAT for active ftp only. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgAclTcpUrg 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.25 integer read-only
Enable or disable TCP URG packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgAclTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.26 integer read-only
Enable or disable TCP ACK packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgAclTcpPsh 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.27 integer read-only
Enable or disable TCP PSH packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgAclTcpRst 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.28 integer read-only
Enable or disable TCP RST packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgAclTcpSyn 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.29 integer read-only
Enable or disable TCP SYN packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgAclTcpFin 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.30 integer read-only
Enable or disable TCP FIN packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgAclIcmp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.31 integer read-only
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
                     fltCurCfgAclIpOption 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.32 integer read-only
Enable or disable IP option matching. Enumeration: 'enable': 1, 'disable': 2.
                     fltCurCfgBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.33 integer32 read-only
Filt default BW contract number.
                     fltCurCfgAclIpTos 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.34 integer read-only
The IP TOS value to be filtered.
                     fltCurCfgAclIpTosMask 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.35 integer read-only
The IP TOS mask for filtering.
                     fltCurCfgAclIpTosNew 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.36 integer read-only
The new IP TOS value to over-write when filtering fired.
                     fltCurCfgFwlb 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.37 integer read-only
Enable or disable filtering on firewall redirect hash method. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgNatTimeout 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.38 integer read-only
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
                     fltCurCfgLinklb 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.39 integer read-only
Enable or disable WAN link load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgWapRadiusSnoop 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.40 integer read-only
Enable or disable WAP RADIUS snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgSrcIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.41 integer read-only
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field. Enumeration: 'ip': 1, 'mac': 2.
                     fltCurCfgDstIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.42 integer read-only
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field. Enumeration: 'ip': 1, 'mac': 2.
                     fltCurCfgIdslbHash 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.43 integer read-only
Set hash parameter for intrusion detection server load balancing. Enumeration: 'both': 3, 'sip': 1, 'dip': 2.
                     fltCurCfgVlan 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.44 integer read-only
Set the VLAN assoicated with the filter.
                     fltCurCfgName 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.45 displaystring read-only
The name of the filter.
                     fltCurCfgTcpRateLimit 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.46 integer read-only
Enable or disable protocol rate limiting. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgTcpRateMaxConn 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.47 integer read-only
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in units of 10).
                     fltCurCfgHash 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.48 integer read-only
Set hash parameter for the filter. Enumeration: 'auto': 1, 'sip': 2, 'dip': 3, 'sipsport': 5, 'both': 4.
                     fltCurCfgLayer7DenyState 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.50 integer read-only
Enable or disable layer 7 deny filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgLayer7DenyUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.51 octet string read-only
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
                     fltCurCfgGotoFilter 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.52 integer32 read-only
The filter ID for GOTO action in the current config.
                     fltCurCfgRadiusWapPersist 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.53 integer read-only
Enable or disable Radius/WAP persistence. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgPbind 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.54 integer read-only
Enable or disable filter persistent binding. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgTimeWindow 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.55 integer read-only
The time window for protocol rate limiting (in seconds).
                     fltCurCfgHoldDuration 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.56 integer read-only
The hold down duration for protocol rate limiting (in minutes).
                     fltCurCfgPatternMatch 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.57 integer read-only
Enable or disable binary pattern matching. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgLayer7DenyMatchAll 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.58 integer read-only
Enable or disable match-all criteria for L7 deny string matching. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgProxyIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.59 ipaddress read-only
The client proxy IP address for NAT and REDIR filter.
                     fltCurCfgLayer7ParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.60 integer read-only
Enable or disable layer 7 lookup (parsing) of all packets. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgSecurityParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.61 integer read-only
Enable or disable pattern string lookup (parsing) of all packets. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgPatternMatchGroupBmap 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.62 octet string read-only
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
                     fltCurCfg8021pBitsValue 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.63 integer read-only
The 802.1p bits value to match.
                     fltCurCfg8021pBitsMatch 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.64 integer read-only
Enable or disable matching on 802.1p bits in the packets. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgAclIpLength 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.65 integer read-only
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
                     fltCurCfgIdsGroup 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.66 integer32 read-only
The real server group for IDS load balancing. A value of 0 indicates 'none'.
                     fltCurCfgEgressPip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.67 integer read-only
Enable or disable pip selection based on egress port/vlan. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgDbind 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.68 integer read-only
Enable or disable filter delayed binding. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgRevBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.69 integer32 read-only
Filt reverse session BWM contract number.
                     fltCurCfgReverse 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.70 integer read-only
Enable or disable creating session for reverse side traffic. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgParseChn 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.71 integer read-only
Enable or disable chained pgroup match criteria for l7 filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgRtpBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.72 integer32 read-only
BWM contract for SIP RTP traffic.
                     fltCurCfgSipParsing 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.73 integer read-only
Enable or disable SIP NAT. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.74 integer read-only
Enable or disable session mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgIpVer 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.75 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                     fltCurCfgIpv6Sip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.76 displaystring read-only
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltCurCfgIpv6Sprefix 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.77 integer read-only
The prefix length associated with source IP address .
                     fltCurCfgIpv6Dip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.78 displaystring read-only
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltCurCfgIpv6Dprefix 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.79 integer read-only
The prefix length associated with destination IP address .
                     fltCurCfgHdrHash 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.80 integer read-only
The header hash filter. Enumeration: 'headerhash': 2, 'none': 1.
                     fltCurCfgHdrName 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.81 displaystring read-only
The header name of the filter.
                     fltCurCfgHdrHashLen 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.82 integer read-only
The header hash length of the filter.
                     fltCurCfgL3Filter 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.83 integer read-only
The L3 filter processing state for this filter. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgNatIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.84 ipaddress read-only
The nat IP address to be filtered.
                     fltCurCfgIpv6Nip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.85 displaystring read-only
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltCurCfgIpv6Proxy 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.86 displaystring read-only
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltCurCfgL7SipFilt 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.87 integer read-only
Enable/Disable L7 application SIP UDP filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgNatMcastVlan 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.88 integer read-only
Multicast VLAN.
                     fltCurCfgNbind 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.89 integer read-only
Enable or disable subnet binding for redirection. Enumeration: 'disabled': 2, 'enabled': 1.
             fltNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.2.3 no-access
The filtering table in the new configuration block.
                 fltNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.3.1 no-access
A row in the filtering table.
                     fltNewCfgIndx 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.1 integer32 read-only
The filtering table index.
                     fltNewCfgSrcIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.2 ipaddress read-only
The source IP address to be filtered.
                     fltNewCfgSrcIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.3 ipaddress read-only
The source IP sub-net mask for filtering.
                     fltNewCfgDstIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.4 ipaddress read-only
The destination IP address to be filtered.
                     fltNewCfgDstIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.5 ipaddress read-only
The destination IP sub-net mask for filtering.
                     fltNewCfgProtocol 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.6 integer read-only
The protocol to be filtered.
                     fltNewCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.7 integer read-only
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltNewCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.8 integer read-only
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltNewCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.9 integer read-only
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltNewCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.10 integer read-only
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                     fltNewCfgAction 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.11 integer read-only
The action for the filtering rule. Enumeration: 'redirect': 3, 'deny': 2, 'nat': 4, 'allow': 1, 'goto': 5.
                     fltNewCfgRedirPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.12 integer read-only
The real server port number used for redirection.
                     fltNewCfgRedirGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.13 integer32 read-only
The real server group to be redirected to.
                     fltNewCfgLog 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.14 integer read-only
Enable or disable logging. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgState 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.15 integer read-only
The state of this filtering rule. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgDelete 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.16 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                     fltNewCfgNat 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.17 integer read-only
The selection of destination or source or multicast for network address translation. Enumeration: 'multicast-address': 3, 'destination-address': 1, 'source-address': 2.
                     fltNewCfgCache 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.18 integer read-only
Enable or disable caching sessions that match filter. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.19 integer read-only
Turn the invert logic on or off for the filter entry. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgClientProxy 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.20 integer read-only
Enable or disable client proxy. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.21 integer read-only
Enable or disable filtering on matching TCP ACK and RST flag. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgSrcMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.23 physaddress read-only
The source MAC address to be filtered.
                     fltNewCfgDstMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.24 physaddress read-only
The Destination MAC address to be filtered.
                     fltNewCfgFtpNatActive 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.25 integer read-only
Enable or disable FTP NAT for active ftp. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgAclTcpUrg 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.26 integer read-only
Enable or disable TCP URG packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgAclTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.27 integer read-only
Enable or disable TCP ACK packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgAclTcpPsh 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.28 integer read-only
Enable or disable TCP PSH packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgAclTcpRst 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.29 integer read-only
Enable or disable TCP RST packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgAclTcpSyn 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.30 integer read-only
Enable or disable TCP SYN packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgAclTcpFin 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.31 integer read-only
Enable or disable TCP FIN packet. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgAclIcmp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.32 integer read-only
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
                     fltNewCfgAclIpOption 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.33 integer read-only
Enable or disable IP option matching. Enumeration: 'enable': 1, 'disable': 2.
                     fltNewCfgBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.34 integer32 read-only
Filt default BW contract number.
                     fltNewCfgAclIpTos 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.35 integer read-only
The IP TOS value to be filtered.
                     fltNewCfgAclIpTosMask 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.36 integer read-only
The IP TOS mask for filtering.
                     fltNewCfgAclIpTosNew 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.37 integer read-only
The new IP TOS value to over-write when filtering fired.
                     fltNewCfgFwlb 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.38 integer read-only
Enable or disable filtering on firewall redirect hash method. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgNatTimeout 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.39 integer read-only
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
                     fltNewCfgLinklb 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.40 integer read-only
Enable or disable WAN link load balancing. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgWapRadiusSnoop 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.41 integer read-only
Enable or disable WAP RADIUS snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgSrcIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.42 integer read-only
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field. Enumeration: 'ip': 1, 'mac': 2.
                     fltNewCfgDstIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.43 integer read-only
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field. Enumeration: 'ip': 1, 'mac': 2.
                     fltNewCfgIdslbHash 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.44 integer read-only
Set hash parameter for intrusion detection server load balancing. Enumeration: 'both': 3, 'sip': 1, 'dip': 2.
                     fltNewCfgVlan 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.45 integer read-only
Set the VLAN assoicated with the filter.
                     fltNewCfgName 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.46 displaystring read-only
The name of the filter.
                     fltNewCfgTcpRateLimit 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.47 integer read-only
Enable or disable protocol rate limiting. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgTcpRateMaxConn 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.48 integer read-only
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in units of 10).
                     fltNewCfgHash 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.49 integer read-only
Set hash parameter for the filter. Enumeration: 'auto': 1, 'sip': 2, 'dip': 3, 'sipsport': 5, 'both': 4.
                     fltNewCfgLayer7DenyState 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.51 integer read-only
Enable or disable layer 7 deny filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgLayer7DenyUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.52 octet string read-only
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
                     fltNewCfgLayer7DenyAddUrl 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.53 integer32 read-only
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
                     fltNewCfgLayer7DenyRemUrl 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.54 integer32 read-only
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
                     fltNewCfgGotoFilter 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.55 integer32 read-only
The filter ID for GOTO action in the new config.
                     fltNewCfgRadiusWapPersist 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.56 integer read-only
Enable or disable Radius/WAP persistence. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgPbind 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.57 integer read-only
Enable or disable filter persistent binding. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgTimeWindow 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.58 integer read-only
The time window for protocol rate limiting (in seconds).
                     fltNewCfgHoldDuration 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.59 integer read-only
The hold down duration for protocol rate limiting (in minutes).
                     fltNewCfgPatternMatch 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.60 integer read-only
Enable or disable binary pattern matching. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgLayer7DenyMatchAll 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.61 integer read-only
Enable or disable match-all criteria for L7 deny string matching. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgProxyIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.62 ipaddress read-only
The client proxy IP address for NAT and REDIR filter.
                     fltNewCfgLayer7ParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.63 integer read-only
Enable or disable layer 7 lookup (parsing) of all packets. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgSecurityParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.64 integer read-only
Enable or disable pattern string lookup (parsing) of all packets. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgPatternMatchGroupBmap 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.65 octet string read-only
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
                     fltNewCfgAddPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.66 integer32 read-only
The pattern match group to be added to the security filter. A zero is returned when read.
                     fltNewCfgRemPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.67 integer32 read-only
The pattern match group to be to be removed from the security filter. A zero is returned when read.
                     fltNewCfg8021pBitsValue 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.68 integer read-only
The 802.1p bits value to match.
                     fltNewCfg8021pBitsMatch 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.69 integer read-only
Enable or disable matching on 802.1p bits in the packets. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgAclIpLength 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.70 integer read-only
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
                     fltNewCfgIdsGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.71 integer32 read-only
The real server group for IDS load balancing. A value of 0 indicates 'none'.
                     fltNewCfgEgressPip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.72 integer read-only
Enable or disable pip selection based on egress port/vlan. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgDbind 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.73 integer read-only
Enable or disable filter delayed binding. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgRevBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.74 integer32 read-only
Filt reverse session BWM contract number.
                     fltNewCfgReverse 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.75 integer read-only
Enable or disable creating session for reverse side traffic. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgParseChn 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.76 integer read-only
Enable or disable chained pgroup match criteria for l7 filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgRtpBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.77 integer32 read-only
BWM contract for SIP RTP traffic.
                     fltNewCfgSipParsing 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.78 integer read-only
Enable or disable SIP NAT. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.79 integer read-only
Enable or disable session mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgIpVer 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.80 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                     fltNewCfgIpv6Sip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.81 displaystring read-only
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltNewCfgIpv6Sprefix 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.82 integer read-only
The prefix length associated with source IP address .
                     fltNewCfgIpv6Dip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.83 displaystring read-only
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltNewCfgIpv6Dprefix 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.84 integer read-only
The prefix length associated with destination IP address .
                     fltNewCfgHdrHash 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.85 integer read-only
The header hash filter. Enumeration: 'headerhash': 2, 'none': 1.
                     fltNewCfgHdrName 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.86 displaystring read-only
The header name of the filter. Headerhash should be enabled before header name is configured.
                     fltNewCfgHdrHashLen 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.87 integer read-only
The header hash length of the filter. Headerhash should be enabled before hash length is configured.
                     fltNewCfgL3Filter 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.88 integer read-only
The L3 filter processing state for this filter. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgNatIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.89 ipaddress read-write
The nat IP address to be filtered.
                     fltNewCfgIpv6Nip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.90 displaystring read-write
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltNewCfgIpv6Proxy 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.91 displaystring read-write
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     fltNewCfgL7SipFilt 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.92 integer read-write
Enable/Disable L7 application SIP UDP filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgNatMcastVlan 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.93 integer read-write
Multicast VLAN.
                     fltNewCfgNbind 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.94 integer read-only
Enable or disable subnet binding for redirection. Enumeration: 'disabled': 2, 'enabled': 1.
             fltCurCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.2.4 no-access
The filtering port table in the current configuration block.
                 fltCurCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.4.1 no-access
A row in the filtering port table.
                     fltCurCfgPortIndx 1.3.6.1.4.1.1872.2.5.4.1.2.4.1.1 integer32 read-only
The port index.
                     fltCurCfgPortState 1.3.6.1.4.1.1872.2.5.4.1.2.4.1.2 integer read-only
Enable or disable filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltCurCfgPortFiltBmap 1.3.6.1.4.1.1872.2.5.4.1.2.4.1.3 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
             fltNewCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.2.5 no-access
The filtering port table in the new configuration block.
                 fltNewCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.5.1 no-access
A row in the filtering port table.
                     fltNewCfgPortIndx 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.1 integer32 read-only
The port index.
                     fltNewCfgPortState 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.2 integer read-only
Enable or disable filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                     fltNewCfgPortFiltBmap 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.3 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
                     fltNewCfgPortAddFiltRule 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.4 integer32 read-only
This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
                     fltNewCfgPortRemFiltRule 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.5 integer32 read-only
This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
             fltUrlBwmTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.2.6 integer32 read-only
The maximum number of URL based BWM entries.
             fltCurCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.2.7 no-access
The table of URL based BWM for filtering.
                 fltCurCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.2.7.1 no-access
A row in the URL based BWM filtering table.
                     fltCurCfgUrlBwmFltIndex 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.1 integer32 read-only
The number of the filter.
                     fltCurCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.2 integer32 read-only
The URL Path Identifier.
                     fltCurCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.3 integer32 read-only
The BW contract.
                     fltCurCfgUrlReverseBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.4 integer32 read-only
The BWM contract for reverse traffic.
             fltNewCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.2.8 no-access
The table of URL based BWM for filtering.
                 fltNewCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.2.8.1 no-access
A row in the URL based BWM filtering table.
                     fltNewCfgUrlBwmFltIndex 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.1 integer32 read-only
The number of the filter.
                     fltNewCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.2 integer32 read-only
The URL Path Identifier.
                     fltNewCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.3 integer32 read-only
The BW traffic contract.
                     fltNewCfgUrlBwmDelete 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.4 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                     fltNewCfgUrlReverseBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.5 integer32 read-only
The BWM contract for reverse traffic.
             fltCfgHttpRedirMappingTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.2.9 integer32 read-only
The maximum number of entries in HttpRedirMappingTable.
             fltCurCfgHttpRedirMappingTable 1.3.6.1.4.1.1872.2.5.4.1.2.10 no-access
The table of HTTP redirection mapping table.
                   fltCurCfgHttpRedirMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.2.10.1 no-access
A row in the HTTP redirect mapping table.
                       fltCurCfgHttpRedirMappingFilter 1.3.6.1.4.1.1872.2.5.4.1.2.10.1.1 integer32 read-only
The filter number.
                       fltCurCfgHttpRedirMappingFromStr 1.3.6.1.4.1.1872.2.5.4.1.2.10.1.2 integer read-only
This index is the string ID of Layer7 string table. If HTTP request matches this string, then switch issues a HTTP REDIRECT to client with the fltCurCfgHttpRedirMappingToStr string.
                       fltCurCfgHttpRedirMappingToStr 1.3.6.1.4.1.1872.2.5.4.1.2.10.1.3 integer read-only
The string ID of Layer7 string table. The switch sends HTTP Redirect back to client with this string when HTTP request matches the fltCurCfgHttpRedirMappingFromStr string
             fltNewCfgHttpRedirMappingTable 1.3.6.1.4.1.1872.2.5.4.1.2.11 no-access
The table of HTTP redirection mapping table.
                   fltNewCfgHttpRedirMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.2.11.1 no-access
A row in the HTTP redirect mapping table.
                       fltNewCfgHttpRedirMappingFilter 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.1 integer32 read-only
The filter number.
                       fltNewCfgHttpRedirMappingFromStr 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.2 integer read-only
The string ID of Layer7 string table. If HTTP request matches this string then switch issues a HTTP REDIRECT to client with the fltNewCfgHttpRedirMappingToStr string.
                       fltNewCfgHttpRedirMappingToStr 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.4 integer read-only
The string ID of Layer7 string table. The switch sends HTTP Redirect back to client with this string when the HTTP request matches fltNewCfgHttpRedirMappingFromStr string.
                       fltNewCfgHttpRedirMappingDelete 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.6 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
             fltNewCfgExtendedTable 1.3.6.1.4.1.1872.2.5.4.1.2.12 no-access
The filtering table in the new configuration block.
                   fltNewCfgExtendedTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.12.1 no-access
A row in the filtering table.
                       fltNewCfgExtendedIndx 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.1 integer32 read-only
The filtering table index.
                       fltNewCfgExtendedLayer7DenyState 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.3 integer read-only
Enable or disable layer 7 deny filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedLayer7DenyUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.4 octet string read-only
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
                       fltNewCfgExtendedLayer7DenyAddUrl 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.5 integer32 read-only
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
                       fltNewCfgExtendedLayer7DenyRemUrl 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.6 integer32 read-only
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
                       fltNewCfgExtendedGotoFilter 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.7 integer32 read-only
The filter ID for GOTO action in the new config.
                       fltNewCfgExtendedRadiusWapPersist 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.8 integer read-only
Enable or disable Radius/WAP persistence. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedPbind 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.9 integer read-only
Enable or disable filter persistent binding. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedTimeWindow 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.10 integer read-only
The time window for protocol rate limiting (in seconds).
                       fltNewCfgExtendedHoldDuration 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.11 integer read-only
The hold down duration for protocol rate limiting (in minutes).
                       fltNewCfgExtendedPatternMatch 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.12 integer read-only
Enable or disable binary pattern matching. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedLayer7DenyMatchAll 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.13 integer read-only
Enable or disable match-all criteria for L7 deny string matching. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedProxyIp 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.14 ipaddress read-only
The client proxy IP address for NAT and REDIR filter.
                       fltNewCfgExtendedLayer7ParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.15 integer read-only
Enable or disable layer 7 lookup (parsing) of all packets. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedSecurityParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.16 integer read-only
Enable or disable pattern string lookup (parsing) of all packets. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedPatternMatchGroupBmap 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.17 octet string read-only
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
                       fltNewCfgExtendedAddPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.18 integer32 read-only
The pattern match group to be added to the security filter. A zero is returned when read.
                       fltNewCfgExtendedRemPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.19 integer32 read-only
The pattern match group to be to be removed from the security filter. A zero is returned when read.
                       fltNewCfgExtended8021pBitsValue 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.20 integer read-only
The 802.1p bits value to match.
                       fltNewCfgExtended8021pBitsMatch 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.21 integer read-only
Enable or disable matching on 802.1p bits in the packets. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedAclIpLength 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.22 integer read-only
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
                       fltNewCfgExtendedIdsGroup 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.23 integer32 read-only
The real server group for IDS load balancing. A value of 0 indicates 'none'.
                       fltNewCfgExtendedEgressPip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.24 integer read-only
Enable or disable pip selection based on egress port/vlan. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedDbind 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.25 integer read-only
Enable or disable filter delayed binding. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedRevBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.26 integer32 read-only
Filt reverse session BWM contract number.
                       fltNewCfgExtendedReverse 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.27 integer read-only
Enable or disable creating session for reverse side traffic. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedParseChn 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.28 integer read-only
Enable or disable chained pgroup match criteria for l7 filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedRtpBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.29 integer32 read-only
BWM contract for SIP RTP traffic.
                       fltNewCfgExtendedSipParsing 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.30 integer read-only
Enable or disable SIP NAT. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.31 integer read-only
Enable or disable session mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedIpVer 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.32 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                       fltNewCfgExtendedIpv6Sip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.33 displaystring read-only
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                       fltNewCfgExtendedIpv6Sprefix 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.34 integer read-only
The prefix length associated with source IP address .
                       fltNewCfgExtendedIpv6Dip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.35 displaystring read-only
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                       fltNewCfgExtendedIpv6Dprefix 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.36 integer read-only
The prefix length associated with destination IP address .
                       fltNewCfgExtendedHdrHash 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.37 integer read-only
The header hash filter. Enumeration: 'headerhash': 2, 'none': 1.
                       fltNewCfgExtendedHdrName 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.38 displaystring read-only
The header name of the filter. Headerhash should be enabled before header name is configured.
                       fltNewCfgExtendedHdrHashLen 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.39 integer read-only
The header hash length of the filter. Headerhash should be enabled before hash length is configured.
                       fltNewCfgExtendedNatIp 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.40 ipaddress read-write
The nat IP address to be filtered.
                       fltNewCfgExtendedIpv6Nip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.41 displaystring read-write
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                       fltNewCfgExtendedIpv6Proxy 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.42 displaystring read-write
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                       fltNewCfgExtendedL7SipFilt 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.43 integer read-write
Enable/Disable L7 application SIP UDP filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedNatMcastVlan 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.44 integer read-write
Multicast VLAN.
                       fltNewCfgExtendedNbind 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.45 integer read-only
Enable or disable subnet binding for redirection. Enumeration: 'disabled': 2, 'enabled': 1.
                       fltNewCfgExtendedL3State 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.46 integer read-only
The L3 filter processing state for this filter. Enumeration: 'disabled': 2, 'enabled': 1.
         gslbCfg 1.3.6.1.4.1.1872.2.5.4.1.3
             gslbGeneralCfg 1.3.6.1.4.1.1872.2.5.4.1.3.1
                 gslbCurCfgGenState 1.3.6.1.4.1.1872.2.5.4.1.3.1.1 integer read-only
Turn on or off Distributed Server Load Balance. Enumeration: 'on': 1, 'off': 2.
                 gslbNewCfgGenState 1.3.6.1.4.1.1872.2.5.4.1.3.1.2 integer read-write
Turn on or off Distributed Server Load Balance. Enumeration: 'on': 1, 'off': 2.
                 gslbCurCfgGenHttpRedirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.7 integer read-only
Enable/Disable HTTP redirect based GSLB in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbNewCfgGenHttpRedirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.8 integer read-write
Enable/Disable HTTP redirect based GSLB in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbCurCfgGenMinco 1.3.6.1.4.1.1872.2.5.4.1.3.1.13 integer read-only
Minmum number of site connections in the current_configuration block.
                 gslbNewCfgGenMinco 1.3.6.1.4.1.1872.2.5.4.1.3.1.14 integer read-write
Minmum number of site connections in the new_configuration block.
                 gslbCurCfgGenUsern 1.3.6.1.4.1.1872.2.5.4.1.3.1.17 integer read-only
Enable/Disable HTTP redirect to real server name. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbNewCfgGenUsern 1.3.6.1.4.1.1872.2.5.4.1.3.1.18 integer read-write
Enable/Disable HTTP redirect to real server name. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbCurCfgGenNoremote 1.3.6.1.4.1.1872.2.5.4.1.3.1.25 integer read-only
Enable/Disable no remote real SLB. Enabling will prevent the switch from load balancing incoming traffic to remote reals in the event that all local reals are down. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbNewCfgGenNoremote 1.3.6.1.4.1.1872.2.5.4.1.3.1.26 integer read-write
Enable/Disable no remote real SLB. Enabling will prevent the switch from load balancing incoming traffic to remote reals in the event that all local reals are down. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbCurCfgGenEncrypt 1.3.6.1.4.1.1872.2.5.4.1.3.1.27 integer read-only
Enable/Disable encrypting remote site update. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbNewCfgGenEncrypt 1.3.6.1.4.1.1872.2.5.4.1.3.1.28 integer read-write
Enable/Disable encrypting remote site update. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbCurCfgGenRemSiteUpdatePort 1.3.6.1.4.1.1872.2.5.4.1.3.1.29 integer read-only
TCP port number for remote site updates in the current configuration block.
                 gslbNewCfgGenRemSiteUpdatePort 1.3.6.1.4.1.1872.2.5.4.1.3.1.30 integer read-write
TCP port number for remote site updates in the new configuration block.
                 gslbCurCfgGenSessUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.31 integer read-only
Session utilization capacity threshold in the current configuration block.
                 gslbNewCfgGenSessUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.32 integer read-write
Session utilization capacity threshold in the new configuration block.
                 gslbCurCfgGenCpuUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.33 integer read-only
CPU utilization capacity threshold in the current configuration block.
                 gslbNewCfgGenCpuUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.34 integer read-write
CPU utilization capacity threshold in the new configuration block.
                 gslbCurCfgGenSourceIpNetmask 1.3.6.1.4.1.1872.2.5.4.1.3.1.35 ipaddress read-only
Source IP netmask for DNS persistence cache in the current configuration block.
                 gslbNewCfgGenSourceIpNetmask 1.3.6.1.4.1.1872.2.5.4.1.3.1.36 ipaddress read-write
Source IP netmask for DNS persistence cache in the new configuration block.
                 gslbCurCfgGenTimeout 1.3.6.1.4.1.1872.2.5.4.1.3.1.37 integer read-only
Timeout in minutes for DNS persistence cache in the current configuration block.
                 gslbNewCfgGenTimeout 1.3.6.1.4.1.1872.2.5.4.1.3.1.38 integer read-write
Timeout in minutes for DNS persistence cache in the new configuration block.
                 gslbCurCfgGenDnsDirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.39 integer read-only
Enable/Disable authoritative DNS direct based Global SLB in the current configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbNewCfgGenDnsDirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.40 integer read-write
Enable/Disable authoritative DNS direct based Global SLB in the new configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbCurCfgGenRemSiteUpdateVersion 1.3.6.1.4.1.1872.2.5.4.1.3.1.41 integer read-only
DSSP version 1,2,3,4 or 5 to send out remote site updates in the current configuration block.
                 gslbNewCfgGenRemSiteUpdateVersion 1.3.6.1.4.1.1872.2.5.4.1.3.1.42 integer read-write
DSSP version 1,2,3,4 or 5 to send out remote site updates in the new configuration block.
                 gslbCurCfgGenHostname 1.3.6.1.4.1.1872.2.5.4.1.3.1.43 integer read-only
Enable/Disable virtual service hostname matching in the current configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbNewCfgGenHostname 1.3.6.1.4.1.1872.2.5.4.1.3.1.44 integer read-write
Enable/Disable virtual service hostname matching in the new configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbCurCfgGenRemSiteUpdateIntervalSeconds 1.3.6.1.4.1.1872.2.5.4.1.3.1.45 integer read-only
The time interval in seconds for updating remote site status in the current_configuration block.
                 gslbNewCfgGenRemSiteUpdateIntervalSeconds 1.3.6.1.4.1.1872.2.5.4.1.3.1.46 integer read-write
The time interval in seconds for updating remote site status in the new_configuration block.
                 gslbCurCfgGenNoResp 1.3.6.1.4.1.1872.2.5.4.1.3.1.47 integer read-only
DNS response code when no server is returned for the current_configuration block.
                 gslbNewCfgGenNoResp 1.3.6.1.4.1.1872.2.5.4.1.3.1.48 integer read-write
DNS response code when no server is returned for the new_configuration block.
                 gslbCurCfgProximityTime 1.3.6.1.4.1.1872.2.5.4.1.3.1.49 integer read-only
Current_configuration block maximum time allowed for Client Proximity calculation.
                 gslbNewCfgProximityTime 1.3.6.1.4.1.1872.2.5.4.1.3.1.50 integer read-write
New_configuration block maximum time allowed for Client Proximity calculation.
                 gslbCurCfgProximityMask 1.3.6.1.4.1.1872.2.5.4.1.3.1.51 integer read-only
Client Proximity default netmask of the client cache for the current_configuration block.
                 gslbNewCfgProximityMask 1.3.6.1.4.1.1872.2.5.4.1.3.1.52 integer read-write
Client Proximity default netmask of the client cache for the new_configuration block.
                 gslbCurCfgProximityAge 1.3.6.1.4.1.1872.2.5.4.1.3.1.53 integer read-only
Client Proximity Age timeout of each client network entries for the current_configuration block.
                 gslbNewCfgProximityAge 1.3.6.1.4.1.1872.2.5.4.1.3.1.54 integer read-write
Client Proximity Age timeout of each client network entries for the new_configuration block.
                 gslbCurCfgGenSourceIpv6Prefix 1.3.6.1.4.1.1872.2.5.4.1.3.1.55 integer read-only
Source IPv6 prefix for DNS persistence cache in the current configuration block.
                 gslbNewCfgGenSourceIpv6Prefix 1.3.6.1.4.1.1872.2.5.4.1.3.1.56 integer read-write
Source IPv6 prefix for DNS persistence cache in the new configuration block.
             gslbSitesCfg 1.3.6.1.4.1.1872.2.5.4.1.3.2
                 gslbRemSiteTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.2.1 integer32 read-only
The maximum number of GSLB remote sites.
                 gslbCurCfgRemSiteTable 1.3.6.1.4.1.1872.2.5.4.1.3.2.2 no-access
The GSLB remote site table in the current configuration block.
                     gslbCurCfgRemSiteTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1 no-access
A row in the GSLB remote site table.
                         gslbCurCfgRemSiteIndx 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.1 integer32 read-only
The GSLB remote site table index.
                         gslbCurCfgRemSitePrimaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.2 ipaddress read-only
The primary IP address of the remote site in the current_configuration block.
                         gslbCurCfgRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.3 ipaddress read-only
The secondary IP address of the remote site in the current_configuration block.
                         gslbCurCfgRemSiteState 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.4 integer read-only
Enable/Disable GSLB for the remote site in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbCurCfgRemSiteUpdate 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.5 integer read-only
Enable/Disable GSLB for the remote site status update in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbCurCfgRemSiteName 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.6 displaystring read-only
The name of the GSLB remote site.
                         gslbCurCfgRemSitePrimaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.8 integer read-only
The primary IP address version of the remote site. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbCurCfgRemSitePrimaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.9 displaystring read-only
Primary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         gslbCurCfgRemSiteSecondaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.10 integer read-only
The secondary IP address version of the remote site. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbCurCfgRemSiteSecondaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.11 displaystring read-only
Secondary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                 gslbNewCfgRemSiteTable 1.3.6.1.4.1.1872.2.5.4.1.3.2.3 no-access
The GSLB remote site table in the current configuration block.
                     gslbNewCfgRemSiteTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1 no-access
A row in the GSLB remote site table in the current configuration block.
                         gslbNewCfgRemSiteIndx 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.1 integer32 read-only
The GSLB remote site table index.
                         gslbNewCfgRemSitePrimaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.2 ipaddress read-only
The primary IP address of the remote site in the new_configuration block.
                         gslbNewCfgRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.3 ipaddress read-only
The secondary IP address of the remote site in the new_configuration block.
                         gslbNewCfgRemSiteState 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.4 integer read-only
Enable/Disable GSLB for the remote site in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbNewCfgRemSiteUpdate 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.5 integer read-only
Enable/Disable GSLB for the remote site status update in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbNewCfgRemSiteDelete 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.6 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                         gslbNewCfgRemSiteName 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.7 displaystring read-only
The name of the GSLB remote site.
                         gslbNewCfgRemSitePrimaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.9 integer read-only
The primary IP address version of the remote site. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbNewCfgRemSitePrimaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.10 displaystring read-only
Primary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         gslbNewCfgRemSiteSecondaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.11 integer read-only
The secondary IP address version of the remote site. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbNewCfgRemSiteSecondaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.12 displaystring read-only
Secondary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
             gslbEnhNetworkCfg 1.3.6.1.4.1.1872.2.5.4.1.3.4
                 gslbEnhNetworkTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.4.1 integer32 read-only
The maximum number of Global SLB networks.
                 gslbCurCfgEnhNetworkTable 1.3.6.1.4.1.1872.2.5.4.1.3.4.2 no-access
The table of network preference in the current_config.
                     gslbCurCfgEnhNetworkTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1 no-access
The table about a network preference entry configuration.
                         gslbCurCfgEnhNetworkIndx 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.1 integer32 read-only
The current network preference table index.
                         gslbCurCfgEnhNetworkState 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.2 integer read-only
Enable/Disable Global SLB for the network in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbCurCfgEnhNetworkSourceIp 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.3 ipaddress read-only
The Source IP address of the network preference table.
                         gslbCurCfgEnhNetworkNetMask 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.4 ipaddress read-only
The Net mask of the network preference table.
                         gslbCurCfgEnhNetworkVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.5 octet string read-only
The virtual servers in the network. The virtual servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented virtual server belongs to the network 0 - The represented virtual server does not belong to the network
                         gslbCurCfgEnhNetworkRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.6 octet string read-only
The remote real servers in the network. The remote real servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented remote real server belongs to the network 0 - The represented remote real server does not belong to the network
                         gslbCurCfgEnhNetworkSourceIpV6 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.7 displaystring read-only
The Source IPV6 address of the network table Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         gslbCurCfgEnhNetworkVer 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.8 integer read-only
The secondary IP address version of the remote site. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbCurCfgEnhNetworkSprefix 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.9 integer read-only
The prefix length associated with the source IPV6 address of the network table.
                 gslbNewCfgEnhNetworkTable 1.3.6.1.4.1.1872.2.5.4.1.3.4.3 no-access
The table of network preference in the new_config.
                     gslbNewCfgEnhNetworkTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1 no-access
The table about a network preference entry configuration.
                         gslbNewCfgEnhNetworkIndx 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.1 integer32 read-only
The new network preference table index.
                         gslbNewCfgEnhNetworkState 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.2 integer read-only
Enable/Disable Global SLB for the network in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbNewCfgEnhNetworkSourceIp 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.3 ipaddress read-only
The Source IP address of the network table.
                         gslbNewCfgEnhNetworkNetMask 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.4 ipaddress read-only
The Net mask of the network preference table.
                         gslbNewCfgEnhNetworkDelete 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.5 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                         gslbNewCfgEnhNetworkVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.6 octet string read-only
The virtual servers in the network. The virtual servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented virtual server belongs to the network 0 - The represented virtual server does not belong to the network
                         gslbNewCfgEnhNetworkRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.7 octet string read-only
The remote real servers in the network. The remote real servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented remote real server belongs to the network 0 - The represented remote real server does not belong to the network
                         gslbNewCfgEnhNetworkAddVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.8 integer32 read-only
The virtual server to be added to the network. When read, 0 is returned.
                         gslbNewCfgEnhNetworkRemoveVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.9 integer32 read-only
The virtual server to be removed from the network. When read, 0 is returned.
                         gslbNewCfgEnhNetworkAddRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.10 integer32 read-only
The remote real server to be added to the network. When read, 0 is returned.
                         gslbNewCfgEnhNetworkRemoveRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.11 integer32 read-only
The remote real server to be removed from the network. When read, 0 is returned.
                         gslbNewCfgEnhNetworkSourceIpV6 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.12 displaystring read-only
The Source IPV6 address of the network table Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         gslbNewCfgEnhNetworkVer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.13 integer read-only
The secondary IP address version of the remote site. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbNewCfgEnhNetworkSprefix 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.14 integer read-only
The prefix length associated with the source IPV6 address of the network table.
             gslbRuleCfg 1.3.6.1.4.1.1872.2.5.4.1.3.5
                 gslbRuleTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.5.1 integer32 read-only
The maximum number of Global SLB rules.
                 gslbCurCfgRuleTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.2 no-access
The rule table in the current configuration block.
                     gslbCurCfgRuleTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1 no-access
An entry in the rule table in the current configuration block.
                         gslbCurCfgRuleIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.1 integer32 read-only
The rule table index in the current configuration block.
                         gslbCurCfgRuleState 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.2 integer read-only
Enable/Disable the rule in the current configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbCurCfgRuleStartHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.3 integer read-only
Start hour in 24-hour format for the rule in the current configuration block.
                         gslbCurCfgRuleStartMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.4 integer read-only
Start minutes for the rule in the current configuration block.
                         gslbCurCfgRuleEndHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.5 integer read-only
End hour in 24-hour format for the rule in the current configuration block.
                         gslbCurCfgRuleEndMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.6 integer read-only
End minutes for the rule in the current configuration block.
                         gslbCurCfgRuleTTL 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.7 integer read-only
Time to live in seconds of DNS resource records for the rule in the current configuration block.
                         gslbCurCfgRuleRR 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.8 integer read-only
DNS resource records in DNS response for the rule in the current configuration block.
                         gslbCurCfgRuleDname 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.9 displaystring read-only
Network preference domain name for rule.
                 gslbNewCfgRuleTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.3 no-access
The rule table in the new configuration block.
                     gslbNewCfgRuleTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1 no-access
An entry in the rule table in the new configuration block.
                         gslbNewCfgRuleIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.1 integer32 read-only
The rule table index in the new configuration block.
                         gslbNewCfgRuleState 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.2 integer read-only
Enable/Disable the rule in the new configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbNewCfgRuleStartHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.3 integer read-write
Start hour in 24-hour format for the rule in the new configuration block.
                         gslbNewCfgRuleStartMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.4 integer read-write
Start minutes for the rule in the new configuration block.
                         gslbNewCfgRuleEndHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.5 integer read-write
End hour in 24-hour format for the rule in the new configuration block.
                         gslbNewCfgRuleEndMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.6 integer read-write
End minutes for the rule in the new configuration block.
                         gslbNewCfgRuleTTL 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.7 integer read-write
Time to live in seconds of DNS resource records for the rule in the new configuration block.
                         gslbNewCfgRuleRR 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.8 integer read-write
DNS resource records in DNS response for the rule in the new configuration block.
                         gslbNewCfgRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.9 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                         gslbNewCfgRuleDname 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.10 displaystring read-only
Network preference domain name for rule
                 gslbMetricTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.5.4 integer32 read-only
The maximum number of Global SLB metrics for each Global SLB rule.
                 gslbCurCfgMetricTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.5 no-access
The metric table in the current configuration block.
                     gslbCurCfgMetricTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1 no-access
An entry in the metric table in the current configuration block.
                         gslbCurCfgRuleMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.1 integer32 read-only
The rule table index in the current configuration block.
                         gslbCurCfgMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.2 integer32 read-only
The metric table index in the current configuration block.
                         gslbCurCfgMetricMetric 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.3 integer read-only
The metric to use to select next server in the current configuration block. Enumeration: 'none': 14, 'remote': 13, 'qos': 8, 'network': 5, 'always': 12, 'leastconns': 1, 'random': 6, 'availability': 7, 'minmisses': 9, 'geographical': 4, 'hash': 10, 'roundrobin': 2, 'local': 11, 'response': 3, 'persistence': 15.
                         gslbCurCfgMetricNetworkBmap 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.4 octet string read-only
The networks added to the metric. The networks added are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ network 9 || || || ||___ network 8 || |____ network 7 || . . . ||_________ network 2 |__________ network 1 where x : 1 - The represented network added to the metric 0 - The represented network added to the metric
                 gslbNewCfgMetricTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.6 no-access
The metric table in the current configuration block.
                     gslbNewCfgMetricTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1 no-access
An entry in the metric table in the current configuration block.
                         gslbNewCfgRuleMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.1 integer32 read-only
The rule table index in the new configuration block.
                         gslbNewCfgMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.2 integer32 read-only
The metric table index in the new configuration block.
                         gslbNewCfgMetricMetric 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.3 integer read-write
The metric to use to select next server in the new configuration block. Enumeration: 'none': 14, 'remote': 13, 'qos': 8, 'network': 5, 'always': 12, 'leastconns': 1, 'random': 6, 'availability': 7, 'minmisses': 9, 'geographical': 4, 'hash': 10, 'roundrobin': 2, 'local': 11, 'response': 3, 'persistence': 15.
                         gslbNewCfgMetricNetworkBmap 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.4 octet string read-only
The networks added to the metric. The networks added are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ network 9 || || || ||___ network 8 || |____ network 7 || . . . ||_________ network 2 |__________ network 1 where x : 1 - The represented network added to the metric 0 - The represented network added to the metric
                         gslbNewCfgMetricAddNetwork 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.5 integer32 read-write
This is an action object to add network to a metric. The range of the valid index is between 1 and gslbEnhNetworkTableMaxSize. When read, the value '0' is returned always.
                         gslbNewCfgMetricRemNetwork 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.6 integer32 read-write
This is an action object to remove network to a metric. The range of the valid index is between 1 and gslbEnhNetworkTableMaxSize. When read, the value '0' is returned always.
             gslbDnsSecCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6
                 gslbDnsSecGlobalCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6.1
                     gslbCurCfgDnsSecGlobalEnabled 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.1 integer read-only
. Enumeration: 'disabled': 2, 'enabled': 1.
                     gslbNewCfgDnsSecGlobalEnabled 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.2 integer read-write
. Enumeration: 'disabled': 2, 'enabled': 1.
                     gslbCurCfgDnsSecGlobalRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.3 integer read-only
Automatic Roll Over Timer - In Hours.
                     gslbNewCfgDnsSecGlobalRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.4 integer read-write
Automatic Roll Over Timer - In Hours.
                     gslbCurCfgDnsSecGlobalType 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.5 integer read-only
Automatic Roll Over Timer - In Hours. Enumeration: 'nsec': 1, 'nsec3': 2.
                     gslbNewCfgDnsSecGlobalType 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.6 integer read-write
Automatic Roll Over Timer - In Hours. Enumeration: 'nsec': 1, 'nsec3': 2.
                     gslbCurCfgDnsSecGlobalKskRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.9 integer read-only
Automatic KSK Roll Over Timer - In Hours.
                     gslbNewCfgDnsSecGlobalKskRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.10 integer read-write
Automatic KSK Roll Over Timer - In Hours.
                     gslbCurCfgDnsSecGlobalNsec3SaltLen 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.11 integer read-only
NSEC3 Salt Length in bytes.
                     gslbNewCfgDnsSecGlobalNsec3SaltLen 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.12 integer read-write
NSEC3 Salt Length in bytes.
                     gslbCurCfgDnsSecGlobalNsec3SaltLifetime 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.13 integer read-only
NSEC3 Salt Lifetime in seconds.
                     gslbNewCfgDnsSecGlobalNsec3SaltLifetime 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.14 integer read-write
NSEC3 Salt Lifetime in seconds.
                     gslbCurCfgDnsSecGlobalNsec3HashIterations 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.15 integer read-only
NSEC3 Salt Hash Iterations.
                     gslbNewCfgDnsSecGlobalNsec3HashIterations 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.16 integer read-write
NSEC3 Salt Hash Iterations.
                     gslbCurCfgDnsSecGlobalSMPTServerUserName 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.17 displaystring read-only
SMPT Server User Name.
                     gslbNewCfgDnsSecGlobalSMPTServerUserName 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.18 displaystring read-write
SMPT Server User Name.
                 gslbDnsSecKeyCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6.2
                     gslbCurDnsSecKeyTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1 no-access
.
                         gslbCurDnsSecKeyEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1 no-access
.
                             gslbCurDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.1 displaystring read-only
DNS Sec Table Key.
                             gslbCurDnsSecKeyUseCount 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.2 integer read-only
Usage count.
                             gslbCurDnsSecKeyType 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.3 integer read-only
KSK or ZSK. Enumeration: 'keyTypeInvalid': 3, 'keyTypeKSK': 1, 'keyTypeZSK': 2.
                             gslbCurDnsSecKeyStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.4 integer read-only
Key status. Enumeration: 'enable': 1, 'disable': 2.
                             gslbCurDnsSecKeySize 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.5 integer read-only
Size of key (bits). Enumeration: 'keySize1024': 1, 'keySizeInvalid': 4, 'keySize2048': 2, 'keySize4096': 3.
                             gslbCurDnsSecKeyAlgo 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.6 integer read-only
Signing algorithm. Enumeration: 'keyAlgoRsaSha512': 3, 'keyAlgoRsaSha256': 2, 'keyAlgoRsaSha1': 1.
                             gslbCurDnsSecKeyTTL 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.7 integer read-only
DNSSEC - TTL in Seconds.
                             gslbCurDnsSecKeyExpPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.8 unsigned32 read-only
Expiration period in Seconds.
                             gslbCurDnsSecKeyRollOverPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.9 unsigned32 read-only
RollOver period in Seconds.
                             gslbCurDnsSecKeyValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.10 unsigned32 read-only
Signature validity period in Seconds.
                             gslbCurDnsSecKeyPublicationPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.11 unsigned32 read-only
Signature publication period in Seconds.
                     gslbNewDnsSecKeyTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2 no-access
.
                         gslbNewDnsSecKeyEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1 no-access
.
                             gslbNewDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.1 displaystring read-only
DNS Sec Table Key.
                             gslbNewDnsSecKeyUseCount 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.2 integer read-only
Usage count.
                             gslbNewDnsSecKeyType 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.3 integer read-only
KSK or ZSK. Enumeration: 'keyTypeInvalid': 3, 'keyTypeKSK': 1, 'keyTypeZSK': 2.
                             gslbNewDnsSecKeyStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.4 integer read-write
Key state. Enumeration: 'enable': 1, 'disable': 2.
                             gslbNewDnsSecKeySize 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.5 integer read-only
Size of key (bits). Enumeration: 'keySize1024': 1, 'keySizeInvalid': 4, 'keySize2048': 2, 'keySize4096': 3.
                             gslbNewDnsSecKeyAlgo 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.6 integer read-only
Signing algorithm. Enumeration: 'keyAlgoRsaSha512': 3, 'keyAlgoRsaSha256': 2, 'keyAlgoRsaSha1': 1.
                             gslbNewDnsSecKeyTTL 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.7 integer read-write
DNSSEC - TTL.
                             gslbNewDnsSecKeyExpPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.8 unsigned32 read-write
Expiration period in Seconds.
                             gslbNewDnsSecKeyRollOverPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.9 unsigned32 read-write
RollOver period in Seconds.
                             gslbNewDnsSecKeyValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.10 unsigned32 read-write
Signature validity period in Seconds.
                             gslbNewDnsSecKeyPublicationPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.11 unsigned32 read-write
Signature publication period in Seconds.
                             gslbNewDnsSecKeyDelete 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.13 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                             gslbNewDnsSecKeyGenerate 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.14 integer read-only
By setting the value to generate(2), the key will be generated. Enumeration: 'other': 1, 'generate': 2.
                             gslbNewDnsSecKeyGenerateStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.15 integer read-only
Returns the generate status. Enumeration: 'generated': 2, 'inProgress': 3, 'notGenerated': 1.
                 gslbDnsSecZoneCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6.3
                     gslbCurDnsSecZoneTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1 no-access
.
                         gslbCurDnsSecZoneEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1 no-access
.
                             gslbCurDnsSecZoneID 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.1 displaystring read-only
Zone ID.
                             gslbCurDnsSecZoneName 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.2 displaystring read-only
Zone name (virt's dname).
                             gslbCurDnsSecZoneKSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.3 displaystring read-only
KSK 1 of the zone.
                             gslbCurDnsSecZoneKSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.4 displaystring read-only
KSK 2 of the zone.
                             gslbCurDnsSecZoneKSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.5 displaystring read-only
KSK 3 of the zone.
                             gslbCurDnsSecZoneZSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.6 displaystring read-only
ZSK 1 of the zone.
                             gslbCurDnsSecZoneZSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.7 displaystring read-only
ZSK 2 of the zone.
                             gslbCurDnsSecZoneZSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.8 displaystring read-only
ZSK 1 of the zone.
                             gslbCurDnsSecZoneStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.9 integer read-only
Zone status - Enabled/Disabled. Enumeration: 'enable': 1, 'disable': 2.
                             gslbCurDnsSecZoneParentIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.10 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                             gslbCurDnsSecZoneParentIPv4 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.11 ipaddress read-only
Parent IP.
                             gslbCurDnsSecZoneParentIPv6 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.12 displaystring read-only
IPV6 address of the Parent IP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                     gslbNewDnsSecZoneTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2 no-access
.
                         gslbNewDnsSecZoneEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1 no-access
.
                             gslbNewDnsSecZoneID 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.1 displaystring read-only
Zone ID.
                             gslbNewDnsSecZoneName 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.2 displaystring read-write
Zone name (virt's dname).
                             gslbNewDnsSecZoneKSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.3 displaystring read-write
KSK 1 of the zone.
                             gslbNewDnsSecZoneKSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.4 displaystring read-write
KSK 2 of the zone.
                             gslbNewDnsSecZoneKSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.5 displaystring read-write
KSK 3 of the zone.
                             gslbNewDnsSecZoneZSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.6 displaystring read-write
ZSK 1 of the zone.
                             gslbNewDnsSecZoneZSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.7 displaystring read-write
ZSK 2 of the zone.
                             gslbNewDnsSecZoneZSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.8 displaystring read-write
ZSK 3 of the zone.
                             gslbNewDnsSecZoneStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.9 integer read-write
Zone status - Enabled/Disabled. Enumeration: 'enable': 1, 'disable': 2.
                             gslbNewDnsSecZoneParentIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.10 integer read-only
The type of IP address. Enumeration: 'ipv4': 1, 'ipv6': 2.
                             gslbNewDnsSecZoneParentIPv4 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.11 ipaddress read-write
IPV4 address of the Parent IP.
                             gslbNewDnsSecZoneParentIPv6 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.12 displaystring read-write
IPV6 address of the Parent IP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                             gslbNewDnsSecZoneDelete 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.13 integer read-write
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                 gslbDnsSecImportExport 1.3.6.1.4.1.1872.2.5.4.1.3.6.4
                     gslbDnsSecImportExportSCPHostName 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.1 displaystring read-write
SCP Server Host Name or Server IP Address.
                     gslbDnsSecImportExportSCPFileName 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.2 displaystring read-write
SCP Server File name.
                     gslbDnsSecImportExportSCPUserName 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.3 displaystring read-write
SCP Server User Name.
                     gslbDnsSecImportExportSCPPassword 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.4 displaystring read-write
SCP Server Password.
                     gslbDnsSecImportExportKeyID 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.5 displaystring read-write
DNSSEC Key ID.
                     gslbDnsSecImportExportZoneID 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.6 displaystring read-write
DNSSEC Zone ID.
                     gslbDnsSecImportExportPassphrase 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.7 displaystring read-write
Passphrase.
                     gslbDnsSecImportExportComponentType 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.8 integer read-write
Component type to import/export: key, dnskey or ds record. Currently only the key is Supported Enumeration: 'dsrecord': 3, 'none': 0, 'dnskey': 2, 'key': 1.
                     gslbDnsSecImportExportPortType 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.9 integer read-write
The port type: management or data. Enumeration: 'data': 0, 'mgmt': 1.
                     gslbDnsSecImportExportImpKeyType 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.10 integer read-write
KSK or ZSK. Enumeration: 'keyTypeKSK': 1, 'keyTypeZSK': 2.
                     gslbDnsSecImportExportImpKeyStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.11 integer read-write
Key status. Enumeration: 'enable': 1, 'disable': 2.
                     gslbDnsSecImportExportImpKeySize 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.12 integer read-only
Size of key (bits). Enumeration: 'keySize1024': 1, 'keySize2048': 2, 'keySize4096': 3.
                     gslbDnsSecImportExportImpKeyAlgo 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.13 integer read-write
Signing algorithm. Enumeration: 'keyAlgoRsaSha512': 3, 'keyAlgoRsaSha256': 2, 'keyAlgoRsaSha1': 1.
                     gslbDnsSecImportExportImpKeyTTL 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.14 integer read-write
DNSSEC - TTL in Seconds.
                     gslbDnsSecImportExportImpKeyExpPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.15 unsigned32 read-write
Expiration period in Seconds.
                     gslbDnsSecImportExportImpKeyRollOverPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.16 unsigned32 read-write
RollOver period in Seconds.
                     gslbDnsSecImportExportImpKeyValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.17 unsigned32 read-write
Signature validity period in Seconds.
                     gslbDnsSecImportExportImpKeyPublicationPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.18 unsigned32 read-write
Signature publication period in Seconds.
                     gslbDnsSecImportExportAction 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.19 integer read-write
Component type to import/export: key or dnskey. Enumeration: 'import': 1, 'none': 0, 'export': 2.
             gslbDnsResVipCfg 1.3.6.1.4.1.1872.2.5.4.1.3.7
                 gslbCurDnsResVipTable 1.3.6.1.4.1.1872.2.5.4.1.3.7.1 no-access
.
                     gslbCurDnsResVipEntry 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1 no-access
.
                         gslbCurDnsResVipIndex1 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.1 integer read-only
DNS Responder VIP Index 1.
                         gslbCurDnsResVipIndex2 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.2 integer read-only
DNS Responder VIP Index 2.
                         gslbCurDnsResVipName 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.3 displaystring read-only
DNS Responder VIP Name.
                         gslbCurDnsResVipIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.4 integer read-only
The type of IP address of DNS Responder VIP. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbCurDnsResVipV4 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.5 ipaddress read-only
IPV4 address of the DNS Responder VIP.
                         gslbCurDnsResVipV6 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.6 displaystring read-only
IPV6 address of the DNS Responder VIP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         gslbCurDnsResVipStatus 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.7 integer read-only
Zone status - Enabled/Disabled. Enumeration: 'enable': 1, 'disable': 2.
                 gslbNewDnsResVipTable 1.3.6.1.4.1.1872.2.5.4.1.3.7.2 no-access
.
                     gslbNewDnsResVipEntry 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1 no-access
.
                         gslbNewDnsResVipIndex1 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.1 integer read-only
DNS Responder VIP Index 1.
                         gslbNewDnsResVipIndex2 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.2 integer read-only
DNS Responder VIP Index 2.
                         gslbNewDnsResVipName 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.3 displaystring read-write
DNS Responder VIP Name.
                         gslbNewDnsResVipIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.4 integer read-write
The type of IP address of DNS Responder VIP. Enumeration: 'ipv4': 1, 'ipv6': 2.
                         gslbNewDnsResVipV4 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.5 ipaddress read-write
IPV4 address of the DNS Responder VIP.
                         gslbNewDnsResVipV6 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.6 displaystring read-write
IPV6 address of the DNS Responder VIP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                         gslbNewDnsResVipStatus 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.7 integer read-write
Zone status - Enabled/Disabled. Enumeration: 'enable': 1, 'disable': 2.
                         gslbNewDnsResVipDelete 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.8 integer read-write
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                 gslbDnsResVipEmptyIndexesTable 1.3.6.1.4.1.1872.2.5.4.1.3.7.3 no-access
.
                     gslbDnsResVipEmptyIndexesEntry 1.3.6.1.4.1.1872.2.5.4.1.3.7.3.1 no-access
.
                         gslbDnsResVipEmptyIndexesIndex 1.3.6.1.4.1.1872.2.5.4.1.3.7.3.1.1 integer read-only
DNS Responder VIP Index.
         layer4TableSize 1.3.6.1.4.1.1872.2.5.4.1.4
             curCfgFilterTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.1 integer32 read-only
Indicates the number of entries in the filter table current configuration.
             newCfgFilterTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.2 integer32 read-only
Indicates the number of entries in the filter table new configuration.
             curCfgRealServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.3 integer32 read-only
Indicates the number of entries in the SLB real server table current configuration.
             newCfgRealServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.4 integer32 read-only
Indicates the number of entries in the SLB real server table new configuration.
             curCfgRealServerGroupTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.5 integer32 read-only
Indicates the number of entries in the SLB real server group table current configuration.
             newCfgRealServerGroupTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.6 integer32 read-only
Indicates the number of entries in the SLB real server group table new configuration.
             curCfgVirtServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.7 integer32 read-only
Indicates the number of entries in the SLB virtual server table current configuration.
             newCfgVirtServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.8 integer32 read-only
Indicates the number of entries in the SLB virtual server table new configuration.
         wlmCfg 1.3.6.1.4.1.1872.2.5.4.1.6
             slbWlmTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.6.1 integer32 read-only
The maximum number of entries in Workload Manager table.
             slbCurCfgWlmTable 1.3.6.1.4.1.1872.2.5.4.1.6.2 no-access
The table of Workload Managers configuration.
                 slbCurCfgWlmEntry 1.3.6.1.4.1.1872.2.5.4.1.6.2.1 no-access
Information about a particular Workload Manager configuration.
                     slbCurCfgWlmIndex 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.1 integer32 read-only
The Workload Manager number
                     slbCurCfgWlmIpAddr 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.2 ipaddress read-only
IP address of the Workload Manager.
                     slbCurCfgWlmPort 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.3 integer read-only
The port number for the Workload Manager.
                     slbCurCfgWlmGroups 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.4 displaystring read-only
The group number for the Workload Manager.
                     slbCurCfgWlmState 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.5 integer read-only
Connection state of the Workload Manager. Enumeration: 'disabled': 2, 'enabled': 1.
             slbNewCfgWlmTable 1.3.6.1.4.1.1872.2.5.4.1.6.3 no-access
The table of Workload Managers configuration.
                 slbNewCfgWlmEntry 1.3.6.1.4.1.1872.2.5.4.1.6.3.1 no-access
Information about a particular Workload Manager configuration.
                     slbNewCfgWlmIndex 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.1 integer32 read-only
The Workload Manager number
                     slbNewCfgWlmIpAddr 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.2 ipaddress read-only
IP address of the Workload Manager.
                     slbNewCfgWlmPort 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.3 integer read-only
The port number for the Workload Manager.
                     slbNewCfgWlmDelete 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                     slbNewCfgWlmGroups 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.5 displaystring read-only
The group number for the Workload Manager.
                     slbNewCfgWlmState 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.6 integer read-only
Connection state of the Workload Manager. Enumeration: 'disabled': 2, 'enabled': 1.
     layer4Stats 1.3.6.1.4.1.1872.2.5.4.2
         slbSpStats 1.3.6.1.4.1.1872.2.5.4.2.1
             slbStatSpRealServerTable 1.3.6.1.4.1.1872.2.5.4.2.1.1 no-access
The sp-server statistics table. This table shows the statistics of real servers for a particular SP.
                 slbStatSpRealServerEntry 1.3.6.1.4.1.1872.2.5.4.2.1.1.1 no-access
A row in the sp-server statistics table.
                     slbStatSpRealServerSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.1 integer32 read-only
The SP index.
                     slbStatSpRealServerServerIndex 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.2 integer32 read-only
The real server number that identifies the server.
                     slbStatSpRealServerCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.3 gauge32 read-only
The current sessions for the real server.
                     slbStatSpRealServerTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.4 counter32 read-only
The total number of sessions for the real server.
                     slbStatSpRealServerHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.5 counter32 read-only
The lower 32 bit value of the total octets received and transmitted out of the real server on a particular SP.
                     slbStatSpRealServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.6 counter32 read-only
The higher 32 bit value of the total octets received and transmitted out of the real server on a particular SP.
                     slbStatSpRealServerHCOctets 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.7 counter64 read-only
The total octets received and transmitted by the real server on a particular SP.
             slbStatSpFltTable 1.3.6.1.4.1.1872.2.5.4.2.1.4 no-access
The filter statistics table. This table shows the statistics of filters for a particular SP.
                 slbStatSpFltEntry 1.3.6.1.4.1.1872.2.5.4.2.1.4.1 no-access
A row in the filter statistics table.
                     slbStatSpFltSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.4.1.1 integer32 read-only
The SP index.
                     slbStatSpFltIndex 1.3.6.1.4.1.1872.2.5.4.2.1.4.1.2 integer32 read-only
The filter number.
                     slbStatSpFltFirings 1.3.6.1.4.1.1872.2.5.4.2.1.4.1.3 counter32 read-only
The number of instances that the received packet matches the filter rule on this SP.
             slbStatSpMaintTable 1.3.6.1.4.1.1872.2.5.4.2.1.5 no-access
The table of SLB SP maintenance statistics.
                 slbStatSpMaintEntry 1.3.6.1.4.1.1872.2.5.4.2.1.5.1 no-access
A row in the SLB SP maintenance statistics table.
                     slbStatSpMaintSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.1 integer32 read-only
The SP number for which the statistics apply.
                     slbStatSpMaintMaximumSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.2 integer32 read-only
The maximun number of entries per SP in the session table.
                     slbStatSpMaintCurBindings 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.3 gauge32 read-only
The current number of sessions on the SP.
                     slbStatSpMaintCurBindings4Seconds 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.4 gauge32 read-only
The 4 second average current number of sessions on the SP.
                     slbStatSpMaintCurBindings64Seconds 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.5 gauge32 read-only
The 64 second average current number of sessions on the SP.
                     slbStatSpMaintTerminatedSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.6 counter32 read-only
The count of the number of sessions closed because the server failed.
                     slbStatSpMaintBindingFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.7 counter32 read-only
The total number of binding failures on the SP. A binding failure occurs when a SP runs out of session table entries.
                     slbStatSpMaintNonTcpFrames 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.8 counter32 read-only
The total number of non-TCP/IP frames dropped on the SP.
                     slbStatSpMaintTcpFragments 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.9 counter32 read-only
The total number of TCP fragments dropped on the SP.
                     slbStatSpMaintUdpDatagrams 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.10 counter32 read-only
The total number of UDP datagrams dropped on the SP.
                     slbStatSpMaintIncorrectVIPs 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.11 counter32 read-only
The total number of frames with incorrect VIPs that are dropped on the SP.
                     slbStatSpMaintIncorrectVports 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.12 counter32 read-only
The total number of frames with incorrect Virtual Port that are dropped on the SP.
                     slbStatSpMaintRealServerNoAvails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.13 counter32 read-only
The total number of frames that are dropped on the SP because no real server is available.
                     slbStatSpMaintFilteredDeniedFrames 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.14 counter32 read-only
The total number of frames that are denied on the SP by the filter.
                     slbStatSpMaintLandAttacks 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.15 counter32 read-only
The total number of attacks that frames contain the same source and destination IP addresses.
                     slbStatSpMaintIpFragTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.16 counter32 read-only
The total number of fragment sessions processed on the SP.
                     slbStatSpMaintIpFragCurSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.17 gauge32 read-only
The number of sessions in the IP fragment binding table on the SP.
                     slbStatSpMaintIpFragDiscards 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.18 counter32 read-only
The total number of fragments discarded on the SP because there is no entry in the IP fragment binding table.
                     slbStatSpMaintIpFragTableFull 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.19 counter32 read-only
The total number of times IP fragment binding table is full on the SP.
                     slbStatSpMaintClear 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.20 integer read-write
This is an action object to clear the non-operational SLB statistics on the particular SP. ok(1) is returned when read. Enumeration: 'clear': 2, 'ok': 1.
                     slbStatSpMaintOOSFinPktDrops 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.21 counter32 read-only
The total number of Out of state FIN Packets received on the SP.
                     slbStatSpMaintSymSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.22 counter32 read-only
Number of Symantec sessions.
                     slbStatSpMaintSymValidSegments 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.23 counter32 read-only
Number of Symantec valid segments.
                     slbStatSpMaintSymFragSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.24 counter32 read-only
Number of Symantec fragment sessions.
                     slbStatSpMaintSymSegAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.25 counter32 read-only
Number of Symantec segment allocation fails.
                     slbStatSpMaintSymBufferAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.26 counter32 read-only
Number of Symantec buffers allocation fails.
                     slbStatSpMaintSymConnAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.27 counter32 read-only
Number of Symantec Connection allocation fails.
                     slbStatSpMaintSymInvalidBuffers 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.28 counter32 read-only
Number of Symantec Invalid buffers.
                     slbStatSpMaintSymSegReallocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.29 counter32 read-only
Number of Symantec Segment reallocation fails.
                     slbStatSpMaintSymPacketsIn 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.30 counter32 read-only
Symantec Deuce Inspection Stats - No. of packets in.
                     slbStatSpMaintSymPacketsWithNoData 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.31 counter32 read-only
Symantec Deuce Inspection Stats - No. of packets with no data.
                     slbStatSpMaintSymTcpPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.32 counter32 read-only
Symantec Deuce Inspection Stats - No. of TCP packets
                     slbStatSpMaintSymUdpPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.33 counter32 read-only
Symantec Deuce Inspection Stats - No. of UDP Packets
                     slbStatSpMaintSymIcmpPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.34 counter32 read-only
Symantec Deuce Inspection Stats - No. of ICMP Packets
                     slbStatSpMaintSymOtherPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.35 counter32 read-only
Symantec Deuce Inspection Stats - No. of Packets other than TCP UDP or ICMP
                     slbStatSpMaintSymMatchCount 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.36 counter32 read-only
Symantec Deuce Inspection Stats - Match Count
                     slbStatSpMaintSymFetchErrors 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.37 counter32 read-only
Symantec Deuce Inspection Stats - No. of Fetch Errors
                     slbStatSpMaintSymTruncPayloadToMp 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.38 counter32 read-only
Symantec Deuce Inspection Stats - No. of Truncated payload to MP
                     slbStatSpMaintSymPacketsInFastPath 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.39 counter32 read-only
Symantec Deuce Inspection Stats - No. of Packets in fast path
             slbStatSpAuxSessTable 1.3.6.1.4.1.1872.2.5.4.2.1.6 no-access
The auxiliary session table statistics for a particular SP.
                 slbStatSpAuxSessEntry 1.3.6.1.4.1.1872.2.5.4.2.1.6.1 no-access
The statistics of a particular auxiliary session table entry.
                     slbStatSpAuxSessSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.1 integer32 read-only
The SP number.
                     slbStatSpAuxSessIndex 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.2 integer32 read-only
The auxiliary session table number.
                     slbStatSpAuxSessCurConn 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.3 gauge32 read-only
The number of connections in this auxiliary sessions table.
                     slbStatSpAuxSessMaxConn 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.4 integer32 read-only
The maximum number of connections handled by this auxiliary session table.
                     slbStatSpAuxSessAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.5 counter32 read-only
The total number of allocation failures for this auxiliary session table.
         slbStatRServerTable 1.3.6.1.4.1.1872.2.5.4.2.2 no-access
The real server statistics table.
             slbStatRServerEntry 1.3.6.1.4.1.1872.2.5.4.2.2.1 no-access
The statistics of a particular real server.
                 slbStatRServerIndex 1.3.6.1.4.1.1872.2.5.4.2.2.1.1 integer32 read-only
The real server number that identifies the server.
                 slbStatRServerCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.2.1.2 gauge32 read-only
The number of sessions that are currently handled by the real server.
                 slbStatRServerTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.2.1.3 counter32 read-only
The total number of sessions that are handled by the real server.
                 slbStatRServerFailures 1.3.6.1.4.1.1872.2.5.4.2.2.1.4 counter32 read-only
The total number of times that the real server is claimed down.
                 slbStatRServerHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.2.1.5 counter32 read-only
The highest sessions that have been handled by the real server.
                 slbStatRServerHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.2.1.6 counter32 read-only
The lower 32 bit value of octets received and transmitted out of the real server.
                 slbStatRServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.2.1.7 counter32 read-only
The higher 32 bit value of octets received and transmitted out of the real server.
                 slbStatRServerHCOctets 1.3.6.1.4.1.1872.2.5.4.2.2.1.8 counter64 read-only
The total number of octets received and transmitted by the real server.
         slbStatGroupTable 1.3.6.1.4.1.1872.2.5.4.2.3 no-access
The real server group statistics table.
             slbStatGroupEntry 1.3.6.1.4.1.1872.2.5.4.2.3.1 no-access
The statistics of a particular real server group.
                 slbStatGroupIndex 1.3.6.1.4.1.1872.2.5.4.2.3.1.1 integer32 read-only
The real server group number that identifies the group.
                 slbStatGroupCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.3.1.2 gauge32 read-only
The number of sessions that are currently handled by the real server group.
                 slbStatGroupTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.3.1.3 counter32 read-only
The total number of sessions that are handled by the real server group.
                 slbStatGroupHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.3.1.4 counter32 read-only
The highest sessions that have been handled by the real server group.
                 slbStatGroupHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.3.1.5 counter32 read-only
The lower 32 bit value of octets received and transmitted out of the real server group.
                 slbStatGroupHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.3.1.6 counter32 read-only
The higher 32 bit value of octets received and transmitted out of the real server group.
                 slbStatGroupHCOctets 1.3.6.1.4.1.1872.2.5.4.2.3.1.7 counter64 read-only
The total octets received and transmitted by the real server group.
                 slbStatGroupWlmUpdates 1.3.6.1.4.1.1872.2.5.4.2.3.1.8 counter32 read-only
Total weight updates from work load manager.
         slbStatVServerTable 1.3.6.1.4.1.1872.2.5.4.2.4 no-access
The virtual server statistics table.
             slbStatVServerEntry 1.3.6.1.4.1.1872.2.5.4.2.4.1 no-access
The statistics of a particular virtual server group.
                 slbStatVServerIndex 1.3.6.1.4.1.1872.2.5.4.2.4.1.1 integer32 read-only
The virtual server number that identifies the server.
                 slbStatVServerCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.2 gauge32 read-only
The number of sessions that are currently handled by the virtual server.
                 slbStatVServerTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.3 counter32 read-only
The total number of sessions that are handled by the virtual server.
                 slbStatVServerHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.4 counter32 read-only
The highest sessions that have been handled by the virtual server.
                 slbStatVServerHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.4.1.5 counter32 read-only
The lower 32 bit value of octets received and transmitted out of the virtual server.
                 slbStatVServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.4.1.6 counter32 read-only
The higher 32 bit value of octets received and transmitted out of the virtual server.
                 slbStatVServerHeaderHits 1.3.6.1.4.1.1872.2.5.4.2.4.1.8 counter32 read-only
The current HTTP header hits.
                 slbStatVServerHeaderMisses 1.3.6.1.4.1.1872.2.5.4.2.4.1.9 counter32 read-only
The current HTTP header misses.
                 slbStatVServerHeaderTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.10 counter32 read-only
The total HTTP header sessions.
                 slbStatVServerCookieRewrites 1.3.6.1.4.1.1872.2.5.4.2.4.1.11 counter32 read-only
The total Cookie Rewrites.
                 slbStatVServerCookieInserts 1.3.6.1.4.1.1872.2.5.4.2.4.1.12 counter32 read-only
The total Cookie Inserts.
                 slbStatVServerHCOctets 1.3.6.1.4.1.1872.2.5.4.2.4.1.13 counter64 read-only
The total octets received and transmitted by the virtual server.
                 slbStatVServerIpAddress 1.3.6.1.4.1.1872.2.5.4.2.4.1.14 displaystring read-only
IP address of the virtual server.
         slbMaintStats 1.3.6.1.4.1.1872.2.5.4.2.5
             slbStatMaintMaximumSessions 1.3.6.1.4.1.1872.2.5.4.2.5.1 integer32 read-only
The maximun number entries in the session table.
             slbStatMaintCurBindings 1.3.6.1.4.1.1872.2.5.4.2.5.2 gauge32 read-only
The current number of bindings on the port.
             slbStatMaintCurBindings4Seconds 1.3.6.1.4.1.1872.2.5.4.2.5.3 gauge32 read-only
The 4 second average current number of bindings on the port.
             slbStatMaintCurBindings64Seconds 1.3.6.1.4.1.1872.2.5.4.2.5.4 gauge32 read-only
The 64 second average current number of bindings on the port.
             slbStatMaintTerminatedSessions 1.3.6.1.4.1.1872.2.5.4.2.5.5 counter32 read-only
The count of the number of sessions closed because the server failed.
             slbStatMaintAllocFailures 1.3.6.1.4.1.1872.2.5.4.2.5.6 counter32 read-only
The total number of Binding failures on the port. A Binding Failure occurs when a port runs out of binding table entries.
             slbStatMaintNonTcpFrames 1.3.6.1.4.1.1872.2.5.4.2.5.7 counter32 read-only
The total number of non-TCP/IP frames dropped on the port.
             slbStatMaintTcpFragments 1.3.6.1.4.1.1872.2.5.4.2.5.8 counter32 read-only
The total number of TCP fragments dropped on the port.
             slbStatMaintUdpDatagrams 1.3.6.1.4.1.1872.2.5.4.2.5.9 counter32 read-only
The total number of UDP datagrams dropped on the port.
             slbIncorrectVirtServs 1.3.6.1.4.1.1872.2.5.4.2.5.10 counter32 read-only
Incorrect Virtual Servers specified for Server Load Balancing.
             slbIncorrectVports 1.3.6.1.4.1.1872.2.5.4.2.5.11 counter32 read-only
Incorrect Virtual ports specified for Server Load Balancing.
             slbNoRealServs 1.3.6.1.4.1.1872.2.5.4.2.5.12 counter32 read-only
No Real Servers available for Server Load Balancing.
             slbStatMaintBackupServActs 1.3.6.1.4.1.1872.2.5.4.2.5.13 counter32 read-only
The total number of times that backup servers become active due to failure of primary servers.
             slbStatMaintOverflowServActs 1.3.6.1.4.1.1872.2.5.4.2.5.14 counter32 read-only
The total number of times that backup servers become active due to primary servers reach overflow situation.
             slbStatMaintFilteredDeniedFrames 1.3.6.1.4.1.1872.2.5.4.2.5.15 counter32 read-only
The total number of frames that are denied on the port by the filter.
             slbStatMaintLandAttacks 1.3.6.1.4.1.1872.2.5.4.2.5.16 counter32 read-only
The total number of attacks that frames contain the same source and destination IP addresses.
             slbStatMaintIpFragTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.5.17 counter32 read-only
The total number of fragment sessions processed.
             slbStatMaintIpFragCurSessions 1.3.6.1.4.1.1872.2.5.4.2.5.18 gauge32 read-only
The number of sessions in the IP fragment binding table.
             slbStatMaintIpFragDiscards 1.3.6.1.4.1.1872.2.5.4.2.5.19 counter32 read-only
The total number of fragmemts discarded on the SP because there is no entry in the IP fragment binding table.
             slbStatMaintIpFragTableFull 1.3.6.1.4.1.1872.2.5.4.2.5.20 counter32 read-only
The total number times IP fragment binding table is full on the SP.
             slbStatMaintIp6CurrSessions 1.3.6.1.4.1.1872.2.5.4.2.5.21 counter32 read-only
The number of sessions for ipv6.
             slbIncorrectIp6Vip 1.3.6.1.4.1.1872.2.5.4.2.5.22 counter32 read-only
Incorrect Ip6 VIPs specified for server load balancing.
             slbIncorrectIp6Vports 1.3.6.1.4.1.1872.2.5.4.2.5.23 counter32 read-only
Incorrect Ip6 virtual ports specified for server load balancing.
             slbStatMaintIp6PktDropped 1.3.6.1.4.1.1872.2.5.4.2.5.24 counter32 read-only
The total number of Ip6 pacekets dropped.
             slbStatMaintOOSFinPktDrops 1.3.6.1.4.1.1872.2.5.4.2.5.25 counter32 read-only
The total number Out of state FIN Packet drops.
             slbStatMaintSymSessions 1.3.6.1.4.1.1872.2.5.4.2.5.26 counter32 read-only
Total number of Symantec sessions.
             slbStatMaintSymValidSegments 1.3.6.1.4.1.1872.2.5.4.2.5.27 counter32 read-only
Total number of Symantec valid segments.
             slbStatMaintSymFragSessions 1.3.6.1.4.1.1872.2.5.4.2.5.28 counter32 read-only
Total number of Symantec fragment sessions.
             slbStatMaintSymSegAllocFails 1.3.6.1.4.1.1872.2.5.4.2.5.29 counter32 read-only
Total number of Symantec segment allocation fails.
             slbStatMaintSymBufferAllocFails 1.3.6.1.4.1.1872.2.5.4.2.5.30 counter32 read-only
Total number of Symantec buffers allocation fails.
             slbStatMaintSymConnAllocFails 1.3.6.1.4.1.1872.2.5.4.2.5.31 counter32 read-only
Total number of Symantec Connection allocation fails.
             slbStatMaintSymInvalidBuffers 1.3.6.1.4.1.1872.2.5.4.2.5.32 counter32 read-only
Total number of Symantec Invalid buffers.
             slbStatMaintSymSegReallocFails 1.3.6.1.4.1.1872.2.5.4.2.5.33 counter32 read-only
Total number of Symantec Segment reallocation fails.
             slbStatMaintSymPacketsIn 1.3.6.1.4.1.1872.2.5.4.2.5.34 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of Packets in.
             slbStatMaintSymPacketsWithNoData 1.3.6.1.4.1.1872.2.5.4.2.5.35 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of Packets with no data.
             slbStatMaintSymTcpPackets 1.3.6.1.4.1.1872.2.5.4.2.5.36 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of TCP packets
             slbStatMaintSymUdpPackets 1.3.6.1.4.1.1872.2.5.4.2.5.37 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of UDP Packets
             slbStatMaintSymIcmpPackets 1.3.6.1.4.1.1872.2.5.4.2.5.38 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of ICMP Packets
             slbStatMaintSymOtherPackets 1.3.6.1.4.1.1872.2.5.4.2.5.39 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of Packets other than TCP UDP or ICMP
             slbStatMaintSymMatchCount 1.3.6.1.4.1.1872.2.5.4.2.5.40 counter32 read-only
Symantec Deuce Inspection Stats - Total Match Count
             slbStatMaintSymFetchErrors 1.3.6.1.4.1.1872.2.5.4.2.5.41 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of Fetch Errors
             slbStatMaintSymTruncPayloadToMp 1.3.6.1.4.1.1872.2.5.4.2.5.42 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of Truncated payload to MP
             slbStatMaintSymPacketsInFastPath 1.3.6.1.4.1.1872.2.5.4.2.5.43 counter32 read-only
Symantec Deuce Inspection Stats - Total no. of Packets in fast path
         filterStats 1.3.6.1.4.1.1872.2.5.4.2.6
             fltStatTable 1.3.6.1.4.1.1872.2.5.4.2.6.1 no-access
The filter statistics table.
                 fltStatTableEntry 1.3.6.1.4.1.1872.2.5.4.2.6.1.1 no-access
A row in filter statistics table.
                     fltStatFltIndex 1.3.6.1.4.1.1872.2.5.4.2.6.1.1.1 integer32 read-only
The number that identifies the filter.
                     fltStatFltFirings 1.3.6.1.4.1.1872.2.5.4.2.6.1.1.2 counter32 read-only
The number of instances that the received packet matches the filter rule.
         gslbStats 1.3.6.1.4.1.1872.2.5.4.2.7
             gslbStatRemRealServerTable 1.3.6.1.4.1.1872.2.5.4.2.7.1 no-access
The GSLB remote real server statistics table.
                 gslbStatRemRealServerEntry 1.3.6.1.4.1.1872.2.5.4.2.7.1.1 no-access
A row in the remote real server statistics table.
                     gslbStatRemRealServerIndex 1.3.6.1.4.1.1872.2.5.4.2.7.1.1.1 integer32 read-only
The server number that identifies the remote real server.
                     gslbStatRemRealServerDnsHandoffs 1.3.6.1.4.1.1872.2.5.4.2.7.1.1.2 counter32 read-only
The number of DNS handoffs by the remote real server.
                     gslbStatRemRealServerHttpRedirs 1.3.6.1.4.1.1872.2.5.4.2.7.1.1.3 counter32 read-only
The number of HTTP redirections by the remote real server.
             gslbMaintStats 1.3.6.1.4.1.1872.2.5.4.2.7.2
                 gslbStatMaintInGoodSiteUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.2.1 counter32 read-only
The number of good DSSPv1 remote site updates received.
                 gslbStatMaintInBadSiteUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.2.2 counter32 read-only
The number of bad remote site packets received.
                 gslbStatMaintOutSiteUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.2.3 counter32 read-only
The number of DSSPv1 remote site updates sent.
                 gslbStatMaintInGoodSiteUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.2.4 counter32 read-only
The number of good DSSPv2 remote site updates received.
                 gslbStatMaintOutSiteUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.2.5 counter32 read-only
The number of DSSPv2 remote site updates sent.
                 gslbStatMaintLocalSitePers 1.3.6.1.4.1.1872.2.5.4.2.7.2.8 counter32 read-only
The number of local site DNS persistence cache entries added.
                 gslbStatMaintInDns 1.3.6.1.4.1.1872.2.5.4.2.7.2.10 counter32 read-only
The number of DNS queries received.
                 gslbStatMaintInBadDns 1.3.6.1.4.1.1872.2.5.4.2.7.2.11 counter32 read-only
The number of bad DNS queries received.
                 gslbStatMaintOutDns 1.3.6.1.4.1.1872.2.5.4.2.7.2.12 counter32 read-only
The number of DNS responses sent.
                 gslbStatMaintInHttp 1.3.6.1.4.1.1872.2.5.4.2.7.2.13 counter32 read-only
The number of HTTP requests received.
                 gslbStatMaintInBadHttp 1.3.6.1.4.1.1872.2.5.4.2.7.2.14 counter32 read-only
The number of bad HTTP requests received.
                 gslbStatMaintOutHttp 1.3.6.1.4.1.1872.2.5.4.2.7.2.15 counter32 read-only
The number of HTTP responses sent.
                 gslbStatMaintNoServer 1.3.6.1.4.1.1872.2.5.4.2.7.2.16 counter32 read-only
The number of times no server returned.
                 gslbStatMaintNoDomain 1.3.6.1.4.1.1872.2.5.4.2.7.2.17 counter32 read-only
The number of times no matching domain.
                 gslbStatMaintHostHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.18 counter32 read-only
The number of hostname domain hits.
                 gslbStatMaintRuleHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.19 counter32 read-only
The number of network domain hits.
                 gslbStatMaintVirtHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.20 counter32 read-only
The number of basic domain hits.
                 gslbStatMaintNoServerHost 1.3.6.1.4.1.1872.2.5.4.2.7.2.21 counter32 read-only
The number of times no server returned for hostname domain.
                 gslbStatMaintNoServerRule 1.3.6.1.4.1.1872.2.5.4.2.7.2.22 counter32 read-only
The number of times no server returned for network domain.
                 gslbStatMaintNoServerVirt 1.3.6.1.4.1.1872.2.5.4.2.7.2.23 counter32 read-only
The number of times no server returned for basic domain.
                 gslbStatMaintLastNoResultDomain 1.3.6.1.4.1.1872.2.5.4.2.7.2.24 displaystring read-only
The last no result domain.
                 gslbStatMaintLastSrcIp 1.3.6.1.4.1.1872.2.5.4.2.7.2.25 ipaddress read-only
The last source IP address.
                 gslbStatMaintThresholdHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.26 counter32 read-only
The number of times any servers not returned due to threshold exceeded for the corresponding server.
                 gslbStatMaintLastSrcIpV6 1.3.6.1.4.1.1872.2.5.4.2.7.2.27 displaystring read-only
The last source IPV6 address.
             gslbStatGroupTable 1.3.6.1.4.1.1872.2.5.4.2.7.3 no-access
The GSLB group statistics table.
                 gslbStatGroupEntry 1.3.6.1.4.1.1872.2.5.4.2.7.3.1 no-access
A row in the GSLB group statistics table.
                     gslbStatGroupIndex 1.3.6.1.4.1.1872.2.5.4.2.7.3.1.1 integer32 read-only
The group number that identifies the real server group.
                     gslbStatGroupDnsHandoffs 1.3.6.1.4.1.1872.2.5.4.2.7.3.1.2 counter32 read-only
The total number of DNS hand-offs sent to the remote real servers in the group.
                     gslbStatGroupHttpRedirs 1.3.6.1.4.1.1872.2.5.4.2.7.3.1.3 counter32 read-only
The total number of HTTP redirects sent to the remote real servers in the group.
             gslbStatVirtServerTable 1.3.6.1.4.1.1872.2.5.4.2.7.4 no-access
The Global SLB virtual server statistics table.
                 gslbStatVirtServerEntry 1.3.6.1.4.1.1872.2.5.4.2.7.4.1 no-access
A row in the Global SLB virtual server statistics table.
                     gslbStatVirtServerIdx 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.1 integer32 read-only
The virtual server number that identifies the virtual server.
                     gslbStatVirtServerServiceIdx 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.2 integer32 read-only
The virtual server service number that identifies the virtual service.
                     gslbStatVirtServerRserverIdx 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.3 integer32 read-only
The real server number that identifies a remote site. A index of 0 indicates a local virtual server number.
                     gslbStatVirtServerVirtPort 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.4 integer32 read-only
The virtual server service port.
                     gslbStatVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.5 ipaddress read-only
The IP address of the virtual server or remote real server.
                     gslbStatVirtServerResponseTime 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.6 integer32 read-only
The average time (current weight) that each service takes to respond to information exchanges with its peers The time is specified in ticks of 65 milliseconds.
                     gslbStatVirtServerMinSessAvail 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.7 gauge32 read-only
The current number of sessions available for serving client requests. This number will change as client traffic loads change, or as real servers under the virtual server or remote sites go in or out of service.
                     gslbStatVirtServerDname 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.8 displaystring read-only
The domain name of the virtual server and remote real server.
                     gslbStatVirtServerRemSite 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.9 integer32 read-only
The remote site of the remote real server. For virtual server, the remote site is 0.
                     gslbStatVirtDnsDirect 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.10 counter32 read-only
The total number of DNS directs sent to the virtual server or remote real server.
             gslbStatRemSiteTable 1.3.6.1.4.1.1872.2.5.4.2.7.5 no-access
The Global SLB remote site statistics table.
                 gslbStatRemSiteTableEntry 1.3.6.1.4.1.1872.2.5.4.2.7.5.1 no-access
A row in the Global SLB remote site statistics table.
                     gslbStatRemSiteIdx 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.1 integer32 read-only
The remote site number that identifies the remote site.
                     gslbStatRemSiteOutUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.2 counter32 read-only
The number of DSSPv1 remote site updates sent.
                     gslbStatRemSiteInUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.3 counter32 read-only
The number of good DSSPv1 remote site updates received.
                     gslbStatRemSiteOutUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.4 counter32 read-only
The number of DSSPv2 remote site updates sent.
                     gslbStatRemSiteInUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.5 counter32 read-only
The number of good DSSPv2 remote site updates received.
                     gslbStatRemSiteInBadUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.6 counter32 read-only
The number of bad remote site updates received.
             gslbStatEnhNetworkTable 1.3.6.1.4.1.1872.2.5.4.2.7.6 no-access
The Global SLB network statistics table.
                 gslbStatEnhNetworkTableEntry 1.3.6.1.4.1.1872.2.5.4.2.7.6.1 no-access
A row in the Global SLB network statistics table.
                     gslbStatEnhNetworkIdx 1.3.6.1.4.1.1872.2.5.4.2.7.6.1.1 integer32 read-only
The network number that identifies the network.
                     gslbStatEnhNetworkHit 1.3.6.1.4.1.1872.2.5.4.2.7.6.1.2 counter32 read-only
The number of times network is selected.
             gslbStatRuleTable 1.3.6.1.4.1.1872.2.5.4.2.7.7 no-access
The Global SLB rule statistics table.
                 gslbStatRuleTableEntry 1.3.6.1.4.1.1872.2.5.4.2.7.7.1 no-access
A row in the Global SLB rule statistics table.
                     gslbStatRuleIdx 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.1 integer32 read-only
The rule number that identifies the rule.
                     gslbStatRuleLeastconns 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.2 counter32 read-only
The number of times leastconns is used.
                     gslbStatRuleRoundrobin 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.3 counter32 read-only
The number of times roundrobin is used.
                     gslbStatRuleMinmisses 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.4 counter32 read-only
The number of times minmisses is used.
                     gslbStatRuleHash 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.5 counter32 read-only
The number of times hash is used.
                     gslbStatRuleResponse 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.6 counter32 read-only
The number of times response is used.
                     gslbStatRuleGeographical 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.7 counter32 read-only
The number of times geographical is used.
                     gslbStatRuleNetwork 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.8 counter32 read-only
The number of times network is used.
                     gslbStatRuleRandom 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.9 counter32 read-only
The number of times random is used.
                     gslbStatRuleAvailability 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.10 counter32 read-only
The number of times availability is used.
                     gslbStatRuleQos 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.11 counter32 read-only
The number of times qos is used.
                     gslbStatRulePersistence 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.12 counter32 read-only
The number of times persistence is used.
                     gslbStatRuleLocal 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.13 counter32 read-only
The number of times local is used.
                     gslbStatRuleAlways 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.14 counter32 read-only
The number of times always is used.
                     gslbStatRuleRemote 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.15 counter32 read-only
The number of times remote is used.
                     gslbStatRuleTotal 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.16 counter32 read-only
The number of times all the metrics are used.
             gslbStatGeo 1.3.6.1.4.1.1872.2.5.4.2.7.8
                 gslbStatGeoNA 1.3.6.1.4.1.1872.2.5.4.2.7.8.1 counter32 read-only
The number of times North America is selected.
                 gslbStatGeoSA 1.3.6.1.4.1.1872.2.5.4.2.7.8.2 counter32 read-only
The number of times South America is selected.
                 gslbStatGeoEU 1.3.6.1.4.1.1872.2.5.4.2.7.8.3 counter32 read-only
The number of times Europe is selected.
                 gslbStatGeoCA 1.3.6.1.4.1.1872.2.5.4.2.7.8.4 counter32 read-only
The number of times Caribbean is selected.
                 gslbStatGeoPR 1.3.6.1.4.1.1872.2.5.4.2.7.8.5 counter32 read-only
The number of times Pacific Rim is selected.
                 gslbStatGeoSS 1.3.6.1.4.1.1872.2.5.4.2.7.8.6 counter32 read-only
The number of times Sub-Sahara is selected.
                 gslbStatGeoJP 1.3.6.1.4.1.1872.2.5.4.2.7.8.7 counter32 read-only
The number of times Japan is selected.
                 gslbStatGeoTotal 1.3.6.1.4.1.1872.2.5.4.2.7.8.8 counter32 read-only
The number of times any of the regions are selected.
                 gslbStatGeoAF 1.3.6.1.4.1.1872.2.5.4.2.7.8.9 counter32 read-only
The number of times Africa is selected.
             gslbStatPers 1.3.6.1.4.1.1872.2.5.4.2.7.9
                 gslbStatPersCurrent 1.3.6.1.4.1.1872.2.5.4.2.7.9.1 counter32 read-only
The current number of entries in the DNS persistence cache.
                 gslbStatPersHiwat 1.3.6.1.4.1.1872.2.5.4.2.7.9.2 counter32 read-only
The highest number of entries recorded in the DNS persistence cache.
                 gslbStatPersMax 1.3.6.1.4.1.1872.2.5.4.2.7.9.3 counter32 read-only
The maximum number of entries supported in the DNS persistence cache.
         wapStats 1.3.6.1.4.1.1872.2.5.4.2.8
             radiusAcctReqsStats 1.3.6.1.4.1.1872.2.5.4.2.8.1
                 radiusAcctReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.1 counter32 read-only
Radius Account Request.
                 radiusAcctWrapReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.2 counter32 read-only
Radius Account Wrap Request.
                 radiusAcctStartReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.3 counter32 read-only
Radius Account Start Request.
                 radiusAcctUpdateReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.4 counter32 read-only
Radius Account Update Request.
                 radiusAcctStopReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.5 counter32 read-only
Radius Account stop Request.
                 radiusAcctBadReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.6 counter32 read-only
Radius Account Bad Request.
                 radiusAcctAddSessionReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.7 counter32 read-only
Radius Account add session Request.
                 radiusAcctDeleteSessionReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.8 counter32 read-only
Radius Account delete session Request.
                 radiusAcctReqFailsSPDead 1.3.6.1.4.1.1872.2.5.4.2.8.1.10 counter32 read-only
Radius Account request fails SP Dead.
                 radiusAcctReqFailsDMAFails 1.3.6.1.4.1.1872.2.5.4.2.8.1.11 counter32 read-only
Radius Account request fails DMA fails.
                 radiusAcctReqWithFramedIp 1.3.6.1.4.1.1872.2.5.4.2.8.1.12 counter32 read-only
Radius Account request containing the FRAMED_IP field.
                 radiusAcctReqWithoutFramedIp 1.3.6.1.4.1.1872.2.5.4.2.8.1.13 counter32 read-only
Radius Account request not containing the FRAMED_IP field.
             tpcpAddSessReqsStats 1.3.6.1.4.1.1872.2.5.4.2.8.2
                 tpcpAddSessReqs 1.3.6.1.4.1.1872.2.5.4.2.8.2.1 counter32 read-only
WAP add Session requests.
                 tpcpAddSessReqsFailsSPDead 1.3.6.1.4.1.1872.2.5.4.2.8.2.3 counter32 read-only
WAP add Session Fails as the SP is dead.
             tpcpDeleteSessReqsStats 1.3.6.1.4.1.1872.2.5.4.2.8.3
                 tpcpDeleteSessReqs 1.3.6.1.4.1.1872.2.5.4.2.8.3.1 counter32 read-only
TPCP Delete Session Requests.
                 tpcpDeleteSessReqsFailsSPDead 1.3.6.1.4.1.1872.2.5.4.2.8.3.3 counter32 read-only
TPCP Delete Session Fails as the SP is dead.
             wapRequestToWrongSP 1.3.6.1.4.1.1872.2.5.4.2.8.4 counter32 read-only
The WAP delete Session Entries sent to wrong SP.
         ftpStats 1.3.6.1.4.1.1872.2.5.4.2.10
               ftpSlbStatTotal 1.3.6.1.4.1.1872.2.5.4.2.10.1 counter32 read-only
The number of times the switch receives both active and passive FTP connections.
               ftpNatStatTotal 1.3.6.1.4.1.1872.2.5.4.2.10.2 counter32 read-only
The number of times the switch receives the 'port' command from the client.
               ftpStatActiveNatIndex 1.3.6.1.4.1.1872.2.5.4.2.10.3 counter32 read-only
The number of times the switch creates a new index due to 'port' command from the client.
               ftpStatNatAckSeqDiff 1.3.6.1.4.1.1872.2.5.4.2.10.4 counter32 read-only
The difference in the numbers of ACK and SEQ that the switch needs for packet adjustment.
               ftpStatSlbParseIndex 1.3.6.1.4.1.1872.2.5.4.2.10.5 counter32 read-only
The number of times the switch creates a new index in response to the 'pasv' command from the client.
               ftpStatSlbParseAckSeqDiff 1.3.6.1.4.1.1872.2.5.4.2.10.6 counter32 read-only
The difference in the numbers of ACK and SEQ that the switch needs for FTP SLB parsing.
               ftpStatModeSwitchError 1.3.6.1.4.1.1872.2.5.4.2.10.7 counter32 read-only
The number of times the switch is not able to switch modes from active to passive and vice versa.
         rtspStats 1.3.6.1.4.1.1872.2.5.4.2.11
               rtspStatControlConns 1.3.6.1.4.1.1872.2.5.4.2.11.1 counter32 read-only
Total number of active RTSP control connections.
               rtspStatUDPStreams 1.3.6.1.4.1.1872.2.5.4.2.11.2 counter32 read-only
Total number of active UDP streams.
               rtspStatRedirects 1.3.6.1.4.1.1872.2.5.4.2.11.3 counter32 read-only
Total number of switch redirects.
               rtspStatConnDenied 1.3.6.1.4.1.1872.2.5.4.2.11.4 counter32 read-only
Total connections denied due to RTSP connection limit.
               rtspStatAllocFails 1.3.6.1.4.1.1872.2.5.4.2.11.5 counter32 read-only
Total cases of heap memory allocation failures.
               rtspStatBufferAllocs 1.3.6.1.4.1.1872.2.5.4.2.11.6 gauge32 read-only
The total number of buffer allocations used.
         tcpLimitStats 1.3.6.1.4.1.1872.2.5.4.2.12
               tcpLimitStatHoldDowns 1.3.6.1.4.1.1872.2.5.4.2.12.1 counter32 read-only
Total number of client hold downs triggered.
               tcpLimitStatClientEntries 1.3.6.1.4.1.1872.2.5.4.2.12.2 gauge32 read-only
Current number of TCP rate limiting per-client state entries.
               udpLimitStatHoldDowns 1.3.6.1.4.1.1872.2.5.4.2.12.3 counter32 read-only
Total number of UDP client hold downs triggered.
               icmpLimitStatHoldDowns 1.3.6.1.4.1.1872.2.5.4.2.12.4 counter32 read-only
Total number of ICMP client hold downs triggered.
               udpLimitStatClientEntries 1.3.6.1.4.1.1872.2.5.4.2.12.5 counter32 read-only
Current number of UDP rate limiting per-client state entries.
               icmpLimitStatClientEntries 1.3.6.1.4.1.1872.2.5.4.2.12.6 counter32 read-only
Current number of ICMP rate limiting per-client state entries.
         dnsSlbStats 1.3.6.1.4.1.1872.2.5.4.2.13
               dnsSlbStatTCPQueries 1.3.6.1.4.1.1872.2.5.4.2.13.1 counter32 read-only
Total number of TCP DNS queries.
               dnsSlbStatUDPQueries 1.3.6.1.4.1.1872.2.5.4.2.13.2 counter32 read-only
Total number of UDP DNS queries.
               dnsSlbStatInvalidQueries 1.3.6.1.4.1.1872.2.5.4.2.13.3 counter32 read-only
Total number of invalid DNS queries.
               dnsSlbStatMultipleQueries 1.3.6.1.4.1.1872.2.5.4.2.13.4 counter32 read-only
Total number of multiple DNS queries.
               dnsSlbStatDnameParseErrors 1.3.6.1.4.1.1872.2.5.4.2.13.5 counter32 read-only
Total number of domain name parse errors.
               dnsSlbStatFailedMatches 1.3.6.1.4.1.1872.2.5.4.2.13.6 counter32 read-only
Total number of failed real server name matches.
               dnsSlbStatInternalErrors 1.3.6.1.4.1.1872.2.5.4.2.13.7 counter32 read-only
Total number of DNS parsing internal errors.
         slbStatsClear 1.3.6.1.4.1.1872.2.5.4.2.15 integer read-write
This is an action object to clear the non-operational SLB statistics. ok(1) is returned when read. Enumeration: 'clear': 2, 'ok': 1.
         sslSlbStats 1.3.6.1.4.1.1872.2.5.4.2.16
               sslSlbStatSessIdAllocFails 1.3.6.1.4.1.1872.2.5.4.2.16.1 counter32 read-only
The number of times allocation of a session table entry failed when attempting to store a SessionId in the table.
               sslSlbStatCurSessions 1.3.6.1.4.1.1872.2.5.4.2.16.2 gauge32 read-only
The current number of different TCP sessions using SSL service.
               sslSlbStatTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.16.3 counter32 read-only
The total number of different TCP sessions using SSL service.
               sslSlbStatHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.16.4 counter32 read-only
The high water mark of current sessions of different TCP sessions using SSL service.
               sslSlbStatUniqCurSessions 1.3.6.1.4.1.1872.2.5.4.2.16.5 gauge32 read-only
The current number of unique SSL sessions seen on the switch.
               sslSlbStatUniqTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.16.6 counter32 read-only
The total number of unique SSL sessions seen on the switch.
               sslSlbStatUniqHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.16.7 counter32 read-only
The high water mark of unique SSL sessions seen on the switch.
               sslSlbStatPersistPortCurSessions 1.3.6.1.4.1.1872.2.5.4.2.16.8 gauge32 read-only
The current number of SessionIds maintained on SP 4, to allow for persistence across different client ports.
               sslSlbStatPersistPortTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.16.9 counter32 read-only
The total number of SessionIds maintained on SP 4, to allow for persistence across different client ports.
               sslSlbStatPersistPortHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.16.10 counter32 read-only
The high water mask of SessionIds maintained on SP 4, to allow for persistence across different client ports.
               sslOffNewHandShake 1.3.6.1.4.1.1872.2.5.4.2.16.11 integer32 read-only
Number of new SSL handshakes between clients and AAS per second.
               sslOffReusedHandShake 1.3.6.1.4.1.1872.2.5.4.2.16.12 integer32 read-only
Number of existing SSL handshakes reused by clients to communicate with AAS per second.
               sslOffPerReusedHandShake 1.3.6.1.4.1.1872.2.5.4.2.16.13 integer32 read-only
Percentage of SSL session re-using keys.
               sslOffPercSessUsingSSLv2 1.3.6.1.4.1.1872.2.5.4.2.16.14 integer32 read-only
Percentage of session using SSLv2 out of all session during measuring period.
               sslOffPercSessUsingSSLv3 1.3.6.1.4.1.1872.2.5.4.2.16.15 integer read-only
Percentage of session using SSLv3 out of all session during measuring period.
               sslOffPercSessUsingTLS 1.3.6.1.4.1.1872.2.5.4.2.16.16 integer read-only
Percentage of session using TLS1.0 out of all session during measuring period.
               sslOffPerServStatsTable 1.3.6.1.4.1.1872.2.5.4.2.16.17 no-access
A table for SSL statistics per virtual service.
                     sslOffPerServStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.16.17.1 no-access
The row definition for SSL statistics per virtual service table.
                         sslOffPerServVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.1 integer32 read-only
Virtual server number.
                         sslOffPerServVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.2 integer32 read-only
Virtual server service index.
                         sslOffPerServVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.3 integer32 read-only
Virtual server service port number.
                         sslOffPerServSslPolId 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.4 displaystring read-only
SSL policy identifier associated with the virtual service.
                         sslOffPerServNewhandShake 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.5 integer32 read-only
Number of New SSL handshakes between Clients and AAS per second for this virtual service.
                         sslOffPerServReusedhandShake 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.6 integer32 read-only
Number of existing SSL handshakes re-used by clients to communicate with AAS per second for virtual service.
                         sslOffPerServPercReusedhandShake 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.7 integer32 read-only
Percentage of SSL session re-using keys for virtual service.
                         sslOffPerServSessUsingSSLv2 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.8 integer32 read-only
Percentage of session using SSLv2 out of all session during measuring period for virtual service.
                         sslOffPerServSessUsingSSLv3 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.9 integer32 read-only
Percentage of session using SSLv3 out of all session during measuring period for virtual service.
                         sslOffPerServSessUsingTLS 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.10 integer32 read-only
Percentage of session using TLS1.0 out of all session during measuring period for virtual service.
                         sslOffPerServSessUsingTLS11 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.11 integer32 read-only
Percentage of session using TLS1.1 out of all session during measuring period for virtual service.
               sslOffPercSessUsingTLS11 1.3.6.1.4.1.1872.2.5.4.2.16.18 integer read-only
Percentage of session using TLS1.1 out of all session during measuring period.
         slbStatAuxSessTable 1.3.6.1.4.1.1872.2.5.4.2.17 no-access
The auxiliary session table statistics.
               slbStatAuxSessEntry 1.3.6.1.4.1.1872.2.5.4.2.17.1 no-access
The statistics of a particular auxiliary session table entry.
                   slbStatAuxSessIndex 1.3.6.1.4.1.1872.2.5.4.2.17.1.1 integer32 read-only
The auxiliary session table number.
                   slbStatAuxSessCurConn 1.3.6.1.4.1.1872.2.5.4.2.17.1.2 gauge32 read-only
The number of connections in this auxiliary sessions table.
                   slbStatAuxSessMaxConn 1.3.6.1.4.1.1872.2.5.4.2.17.1.3 integer32 read-only
The maximum number of connections handled by this auxiliary session table.
                   slbStatAuxSessAllocFails 1.3.6.1.4.1.1872.2.5.4.2.17.1.4 counter32 read-only
The total number of allocation failures for this auxiliary session table.
         slbStatVirtServiceTable 1.3.6.1.4.1.1872.2.5.4.2.18 no-access
The virtual service statistics table.
               slbStatVirtServiceEntry 1.3.6.1.4.1.1872.2.5.4.2.18.1 no-access
The statistics of a particular virtual service.
                   slbStatVirtServerIndex 1.3.6.1.4.1.1872.2.5.4.2.18.1.1 integer32 read-only
The virtual server number that identifies the service.
                   slbStatVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.18.1.2 integer32 read-only
The virtual service number that identifies the service.
                   slbStatRealServerIndex 1.3.6.1.4.1.1872.2.5.4.2.18.1.3 integer32 read-only
The real server index.
                   slbStatVirtServiceCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.18.1.4 gauge32 read-only
The number of sessions that are currently handled by the virtual service.
                   slbStatVirtServiceTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.18.1.5 counter32 read-only
The total number of sessions that are handled by the virtual service.
                   slbStatVirtServiceHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.18.1.6 counter32 read-only
The highest sessions that have been handled by the virtual service.
                   slbStatVirtServiceHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.18.1.7 counter32 read-only
The lower 32 bit value of octets received and transmitted out of the virtual service.
                   slbStatVirtServiceHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.18.1.8 counter32 read-only
The higher 32 bit value of octets received and transmitted out of the virtual service.
                   slbStatVirtServiceHCOctets 1.3.6.1.4.1.1872.2.5.4.2.18.1.9 counter64 read-only
The total octets received and transmitted by the virtual service.
         sipStats 1.3.6.1.4.1.1872.2.5.4.2.20
               sipTotalClientParseErrors 1.3.6.1.4.1.1872.2.5.4.2.20.1 counter32 read-only
Total number of SIP Client parse Errors.
               sipTotalServerParseErrors 1.3.6.1.4.1.1872.2.5.4.2.20.2 counter32 read-only
Total number of SIP Server parse Errors.
               sipTotalUnknownMethodReq 1.3.6.1.4.1.1872.2.5.4.2.20.3 counter32 read-only
Total number of SIP unknown method requests.
               sipTotalIncompleteMsgs 1.3.6.1.4.1.1872.2.5.4.2.20.4 counter32 read-only
Total number of SIP Incomplete messages.
               sipTotalSdpNatPackets 1.3.6.1.4.1.1872.2.5.4.2.20.5 counter32 read-only
Total number of SDP NAT packets.
         wlmStats 1.3.6.1.4.1.1872.2.5.4.2.21
               slbStatWlmTable 1.3.6.1.4.1.1872.2.5.4.2.21.1 no-access
The WLM statistics table.
                   slbStatWlmEntry 1.3.6.1.4.1.1872.2.5.4.2.21.1.1 no-access
The statistics of a particular work load manager.
                       slbStatWlmIndex 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.1 integer32 read-only
The work load manager number.
                       slbStatWlmRegReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.2 counter32 read-only
Total number of registration request messages sent by the switch.
                       slbStatWlmRegRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.3 counter32 read-only
Total number of registration replies received from the GWM.
                       slbStatWlmRegRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.4 counter32 read-only
Total number of registration replies received where the return code indicates an error.
                       slbStatWlmDeregReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.5 counter32 read-only
Total number of deregistration request messages sent by the switch.
                       slbStatWlmDeregRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.6 counter32 read-only
Total number of deregistration replies received from the GWM.
                       slbStatWlmDeregRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.7 counter32 read-only
Total number of deregistration replies received where the return code flag set indicating an error in processing of the deregistration request.
                       slbStatWlmLbStateReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.8 counter32 read-only
Total number of set LB state request messages sent by the switch.
                       slbStatWlmLbStateRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.9 counter32 read-only
Total number of set LB state replies received from the GWM.
                       slbStatWlmLbStateRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.10 counter32 read-only
Total number of set LB state replies received where the return code code flag set indicating an error in processing of the set LB state request.
                       slbStatWlmMembStateReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.11 counter32 read-only
Total number of set member state request messages sent by the switch.
                       slbStatWlmMembStateRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.12 counter32 read-only
Total number of set member state replies received from the GWM.
                       slbStatWlmMembStateRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.13 counter32 read-only
Total number of set member state replies received where the return code code flag set indicating an error in processing of the set member state request.
                       slbStatWlmWtMsgRecv 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.14 counter32 read-only
Total number of weight updates received from the GWM.
                       slbStatWlmWtMsgParErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.15 counter32 read-only
Total number of errorsencountered during parsing of the send weights message.
                       slbStatWlmTotInvalidLb 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.16 counter32 read-only
This counter is incremented when the LB name in send weights message does not match the switch LB name.
                       slbStatWlmTotInvalidGrp 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.17 counter32 read-only
This counter is incremented when the group name in send weights message does not match with any of the groups configured on the switch.
                       slbStatWlmTotInvalidRealSer 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.18 counter32 read-only
This counter is incremented when the real server name in send weights message does not match with any of the reals configured on the switch.
                       slbStatWlmMsgInvalidSASPHeader 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.19 counter32 read-only
Total number of messages received from the GWM with invalid headers.
                       slbStatWlmMsgParseErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.20 counter32 read-only
Total number of parse errors.
                       slbStatWlmMsgUnsupMsgType 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.21 counter32 read-only
Total messages received where the message type is not supported by the switch.
         sessMirrorStats 1.3.6.1.4.1.1872.2.5.4.2.22
               sessMirrorTotalCreateSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.1 counter32 read-only
Total number of create session messages received.
               sessMirrorTotalCreateSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.2 counter32 read-only
Total number of create session messages transmitted .
               sessMirrorTotalCreateDataSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.3 counter32 read-only
Total number of create data session messages received.
               sessMirrorTotalCreateDataSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.4 counter32 read-only
Total number of create data session messages transmitted.
               sessMirrorTotalUpdateSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.5 counter32 read-only
Total number of update session messages received.
               sessMirrorTotalUpdateSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.6 counter32 read-only
Total number of update session messages transmitted.
               sessMirrorTotalUpdateDataSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.7 counter32 read-only
Total number of update data session messages received.
               sessMirrorTotalUpdateDataSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.8 counter32 read-only
Total number of update data session messages transmitted.
               sessMirrorTotalDeleteSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.9 counter32 read-only
Total number of delete session messages received.
               sessMirrorTotalDeleteSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.10 counter32 read-only
Total number of delete session messages transmitted.
               sessMirrorTotalDeleteDataSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.11 counter32 read-only
Total number of delete data session messages received.
               sessMirrorTotalDeleteDataSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.12 counter32 read-only
Total number of delete data session messages transmitted.
               sessMirrorTotalSessionsCreated 1.3.6.1.4.1.1872.2.5.4.2.22.13 counter32 read-only
Total number of sessions created.
               sessMirrorTotalDataSessionsCreated 1.3.6.1.4.1.1872.2.5.4.2.22.14 counter32 read-only
Total number of data sessions created.
               sessMirrorTotalSessionsUpdated 1.3.6.1.4.1.1872.2.5.4.2.22.15 counter32 read-only
Total number of sessions updated.
               sessMirrorTotalDataSessionsUpdated 1.3.6.1.4.1.1872.2.5.4.2.22.16 counter32 read-only
Total number of data sessions updated.
               sessMirrorTotalSessionsDeleted 1.3.6.1.4.1.1872.2.5.4.2.22.17 counter32 read-only
Total number of sessions deleted.
               sessMirrorTotalDataSessionsDeleted 1.3.6.1.4.1.1872.2.5.4.2.22.18 counter32 read-only
Total number of data sessions deleted.
               sessMirrorSessionTableFullErr 1.3.6.1.4.1.1872.2.5.4.2.22.19 counter32 read-only
Error indicates session table full.
               sessMirrorNoPortErr 1.3.6.1.4.1.1872.2.5.4.2.22.20 counter32 read-only
Error indicates unavailable port.
               sessMirrorSessionPresentErr 1.3.6.1.4.1.1872.2.5.4.2.22.21 counter32 read-only
Error indicates session already present.
               sessMirrorSessionNotFoundErr 1.3.6.1.4.1.1872.2.5.4.2.22.22 counter32 read-only
Error indicates session not found.
               sessMirrorCtrlSessionNotFoundErr 1.3.6.1.4.1.1872.2.5.4.2.22.23 counter32 read-only
Error indicates control session not found.
         accelStats 1.3.6.1.4.1.1872.2.5.4.2.23
               cachStats 1.3.6.1.4.1.1872.2.5.4.2.23.1
                   cachStatSummTotObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.1 integer32 read-only
Number of Objects served by cache within the measuring period.
                   cachStatSummHitPerc 1.3.6.1.4.1.1872.2.5.4.2.23.1.2 integer32 read-only
Percent of HTTP requests served by objects from cache.
                   cachStatSummServRate 1.3.6.1.4.1.1872.2.5.4.2.23.1.3 integer32 read-only
Rate of requests served by cache every second.
                   cachStatSummNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.4 integer32 read-only
Amount of new objects cached during the measuring period.
                   cachStatSummRateNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.5 integer32 read-only
Average number of new objects cached every second.
                   cachStatSummNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.6 integer32 read-only
Amount of new bytes cached during the measuring period.
                   cachStatSummRateNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.7 integer32 read-only
Average number of new bytes cached every second.
                   cachStatSummObjSmaller10K 1.3.6.1.4.1.1872.2.5.4.2.23.1.8 integer32 read-only
Amount of objects cached during last measuring period of size smaller than 10KB.
                   cachStatSummObj11KTO50K 1.3.6.1.4.1.1872.2.5.4.2.23.1.9 integer32 read-only
Amount of objects cached during last measuring period of size between 11KB and 50KB.
                   cachStatSummObj51KTO100K 1.3.6.1.4.1.1872.2.5.4.2.23.1.10 integer32 read-only
Amount of objects cached during last measuring period of size between 51KB and 100KB.
                   cachStatSummObj101KTO1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.11 integer32 read-only
Amount of objects cached during last measuring period of size between 101KB and 1MB.
                   cachStatSummObjLarger1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.12 integer32 read-only
Amount of objects cached during last measuring period of size larger than 1MB.
                   cachPerServStatTable 1.3.6.1.4.1.1872.2.5.4.2.23.1.13 no-access
A table for cache statistics per virtual service.
                         cachPerServStatEntry 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1 no-access
The row definition for cache statistics per virtual service table.
                             cachStatPerServVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.1 integer32 read-write
Virtual server index.
                             cachStatPerServVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.2 integer32 read-write
Virtual server service index.
                             cachStatPerServVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.3 integer32 read-write
Virtual server service port number.
                             cachStatPerServCachePolId 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.4 displaystring read-only
Cache policy identifier associated with the virtual service.
                             cachStatPerServTotObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.5 integer32 read-only
Number of objects served by cache during the measuring period for virtual service.
                             cachStatPerServHitPerc 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.6 integer32 read-only
Percent of HTTP requests served by objects from cache for virtual service.
                             cachStatPerServServRate 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.7 integer32 read-only
Rate of requests served by cache every second for virtual service.
                             cachStatPerServNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.8 integer32 read-only
Amount of new objects cached during the measuring period for virtual service.
                             cachStatPerServRateNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.9 integer32 read-only
Average number of new objects cached every second for virtual service.
                             cachStatPerServNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.10 integer32 read-only
Amount of new bytes cached during the measuring period for virtual service.
                             cachStatPerServRateNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.11 integer32 read-only
Average number of new bytes cached every second for virtual service.
                             cachStatPerServObjSmaller10K 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.12 integer32 read-only
Amount of objects cached during last measuring period of size smaller than 10KB for virtual service.
                             cachStatPerServObj11KTO50K 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.13 integer32 read-only
Amount of objects cached during last measuring period of size between 11KB and 50KB for virtual service.
                             cachStatPerServObj51KTO100K 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.14 integer32 read-only
Amount of objects cached during last measuring period of size between 51KB and 100KB for virtual service.
                             cachStatPerServObj101KTO1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.15 integer32 read-only
Amount of objects cached during last measuring period of size between 101KB and 1MB for virtual service.
                             cachStatPerServObjLarger1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.16 integer32 read-only
Amount of objects cached during last measuring period of size larger than 1MB for virtual service.
                   cachPerRuleListStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.1.14 no-access
A table for cache statistics per rule list.
                         cachPerRuleListStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1 no-access
The row definition for cache statistics per rule list table.
                             cachRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.1 integer32 read-only
Cache rule list index.
                             cachRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.2 displaystring read-only
Cache rule list identifier.
                             cachRuleListNumOfObjCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.3 integer32 read-only
Number of objects cached by this rule list.
                             cachRuleListNumOfBytesCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.4 integer32 read-only
Number of bytes cached by this rule list.
                   cachPerRuleStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.1.15 no-access
A table for cache statistics per rule.
                         cachPerRuleStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1 no-access
The row definition for cache statistics per rule table.
                             cachRuleRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.1 integer32 read-only
Cache rule rule-list index.
                             cachRuleIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.2 integer32 read-only
Cache rule number.
                             cachRuleRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.3 displaystring read-only
Cache rule rule-list identifier.
                             cachRuleNumOfObjCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.4 integer32 read-only
Number of objects cached by the rule.
                             cachRuleNumOfBytesCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.5 integer32 read-only
Number of bytes cached by the rule.
               compStats 1.3.6.1.4.1.1872.2.5.4.2.23.2
                   compUnCompressedThrputKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.1 integer32 read-only
Total throughput of compressible object before compression counted during measuring period.
                   compAvgSizeBefCompKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.2 integer32 read-only
Average object size before compression.
                   compCompressedThrputKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.3 integer32 read-only
Total throughput of compressible objects after compression counted during measuring period.
                   compAvgSizeAftCompKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.4 integer32 read-only
Average object size after compression.
                   compAvgCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.5 integer32 read-only
Average compression ratio during measuring period.
                   compThrputCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.6 integer32 read-only
Effective compression ratio out of total traffic.
                   compStatPerServTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.7 no-access
A table for compression statistics per virtual service.
                       compStatPerServEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1 no-access
The row definition for compression statistics per virtual service table.
                           compStatPerServVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.1 integer32 read-write
Virtual server number.
                           compStatPerServVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.2 integer32 read-write
Virtual server service index.
                           compStatPerServVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.3 integer32 read-write
Virtual server service port number.
                           compStatPerServCompPolId 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.4 displaystring read-only
Compression policy identifier associated with the virtual service.
                           compStatPerServUnComprTputKb 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.5 integer32 read-only
Total throughput of compressible object before compression counted during measuring period for virtual service.
                           compStatPerServComprTputKb 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.6 integer32 read-only
Total throughput of compressible objects after compression counted during measuring period for virtual service.
                           compStatPerServAvgSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.7 integer32 read-only
Average object size before compression for virtual service.
                           compStatPerServAvgSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.8 integer32 read-only
Average object size after compression for virtual service.
                           compStatPerServAvgCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.9 integer32 read-only
Average compression ratio during measuring period for virtual service.
                           compStatPerServThrputCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.10 integer32 read-only
Effective compression ratio out of total traffic for virtual service.
                   compPerBrowRuleListStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.8 no-access
A table for compression statistics per rule list.
                       compPerBrowRuleListStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1 no-access
The row definition for compression statistics per rule list table.
                           compBrowRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.1 integer32 read-only
Compression browsing rule list index.
                           compBrowRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.2 displaystring read-only
Compression browsing rule list identifier.
                           compBrowRuleListNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.3 integer32 read-only
Number of objects matched by this rule-list during measuring period.
                           compBrowRuleListSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.4 integer32 read-only
Total size of all matched objects by this browser rule-list before compression.
                           compBrowRuleListSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.5 integer32 read-only
Total size of all matched objects by this browser rule-list after compression.
                           compBrowRuleListCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.6 integer32 read-only
Compression ratio per rule list.
                   compPerBrowRuleStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.9 no-access
A table for compression statistics per browser rule.
                       compPerBrowRuleStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1 no-access
The row definition for compression statistics per browser rule.
                           compBrowRuleRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.1 integer32 read-only
Compression browser rule rule-list index.
                           compBrowRuleIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.2 integer32 read-only
Compression browser rule index.
                           compBrowRuleRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.3 displaystring read-only
Compression browser rule rule-list identifier.
                           compBrowRuleNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.4 integer32 read-only
Number of objects matched by this browser rule during measuring period.
                           compBrowRuleSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.5 integer32 read-only
Total size of all matched objects for this browser rule before compression.
                           compBrowRuleSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.6 integer32 read-only
Total size of all matched objects for this browser rule after compression.
                           compBrowRuleCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.7 integer32 read-only
Compression ratio per browser rule.
                   compPerUrlRuleListStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.10 no-access
A table for compression statistics per URL Rule list.
                         compPerUrlRuleListStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1 no-access
The row definition for this table.
                             compUrlRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.1 integer32 read-only
Compression url rule list index.
                             compUrlRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.2 displaystring read-only
Compression url rule list identifier.
                             compUrlRuleListNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.3 integer32 read-only
Number of objects matched by this url rule list during measuring period.
                             compUrlRuleListSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.4 integer32 read-only
Total size of all matched objects for this url rule list before compression.
                             compUrlRuleListSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.5 integer32 read-only
Total size of all matched objects this url rule list after compression.
                             compUrlRuleListCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.6 integer32 read-only
Compression ratio for this url rule list.
                   compPerUrlRuleStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.11 no-access
A table for compression statistics per URL Rule.
                         compPerUrlRuleStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1 no-access
The row definition for this table.
                             compUrlRuleRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.1 integer32 read-only
Compression url rule rule-list index.
                             compUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.2 integer32 read-only
Compression url rule index.
                             compUrlRuleRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.3 displaystring read-only
Compression url rule rule-list identifier.
                             compUrlRuleNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.4 integer32 read-only
Number of objects matched by this url rule during measuring period.
                             compUrlRuleSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.5 integer32 read-only
Total size of all matched objects for this url rule before compression.
                             compUrlRuleSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.6 integer32 read-only
Total size of all matched objects for this url rule after compression.
                             compUrlRuleCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.7 integer32 read-only
Compression ratio for this url rule.
         httpStats 1.3.6.1.4.1.1872.2.5.4.2.24
               httpStatSummCliusingKeepAliv 1.3.6.1.4.1.1872.2.5.4.2.24.1 integer32 read-only
Number of clients sending connection: keep-alive.
               httpStatSummHTTP10Per 1.3.6.1.4.1.1872.2.5.4.2.24.2 integer32 read-only
Percent of requests done using HTTP 1.0 during the measuring period.
               httpStatSummHTTP11Per 1.3.6.1.4.1.1872.2.5.4.2.24.3 integer32 read-only
Percent of requests done using HTTP 1.1 during measuring period.
               httpStatSummHttpToHttpsRedir 1.3.6.1.4.1.1872.2.5.4.2.24.4 integer32 read-only
Number of HTTP redirect location headers updated from HTTP to HTTPS by AAS.
               httpStatSummAvgNumReqPerConn 1.3.6.1.4.1.1872.2.5.4.2.24.5 integer32 read-only
The average number of requests done over each client connection.
               httpStatSummResSmall1Kb 1.3.6.1.4.1.1872.2.5.4.2.24.6 integer32 read-only
Number of responses for which content size reported smaller than 1KB.
               httpStatSummRes1KbTo10Kb 1.3.6.1.4.1.1872.2.5.4.2.24.7 integer32 read-only
Number of responses for which content size reported between 1KB and 10KB.
               httpStatSummRes11KbTo50Kb 1.3.6.1.4.1.1872.2.5.4.2.24.8 integer32 read-only
Number of responses for which content size reported between 11KB and 50KB.
               httpStatSummRes51KbTo100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.9 integer32 read-only
Number of responses for which content size reported between 51KB and 100KB.
               httpStatSummResLarger100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.10 integer32 read-only
Number of responses for which content size reported larger than 100KB.
               httpTransSummReqCliToAas 1.3.6.1.4.1.1872.2.5.4.2.24.11 integer32 read-only
Number of clients requests from AAS done in the measuring period .
               httpTransSummReqAasToSer 1.3.6.1.4.1.1872.2.5.4.2.24.12 integer32 read-only
Number of AAS requests from servers done in the measuring period.
               httpTransSummResSerToAas 1.3.6.1.4.1.1872.2.5.4.2.24.13 integer32 read-only
Number of servers responses to AAS in the measuring period.
               httpTransSummResAasToCli 1.3.6.1.4.1.1872.2.5.4.2.24.14 integer32 read-only
Number of AAS responses to clients in the measuring period.
               httpTransSummTransRate 1.3.6.1.4.1.1872.2.5.4.2.24.15 integer32 read-only
HTTP transactions per second.
               httpPerServStatsTable 1.3.6.1.4.1.1872.2.5.4.2.24.16 no-access
A table for HTTP statistics per virtual service.
                     httpPerServStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.24.16.1 no-access
The row definition for HTTP statistics per virtual service table.
                         httpPerServStatsVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.1 integer32 read-write
Virtual server number.
                         httpPerServStatsVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.2 integer32 read-write
Virtual server service index.
                         httpPerServStatsVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.3 integer32 read-write
Virtual server service port number.
                         httpPerServStatsCliUseKeepAlive 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.4 integer32 read-only
Number of clients sending Connection: Keep-Alive for virtual service.
                         httpPerServStatsHttp10VsHttp11Ratio 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.5 integer32 read-only
Ratio of requests done using HTTP 1.0 and HTTP 1.1 during measuring period for virtual service.
                         httpPerServStatsHttpToHTTPSRedir 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.6 integer32 read-only
Number of HTTP redirect location headers updated from HTTP to HTTPS by AAS for virtual service.
                         httpPerServStatsAvgNumReqPerConn 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.7 integer32 read-only
The average number of requests done over each client connection for virtual service.
                         httpPerServStatsRespSmall1Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.8 integer32 read-only
Number of responses for which content size reported smaller than 1KB for virtual service.
                         httpPerServStatsResp1KbTo10Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.9 integer32 read-only
Number of responses for which content size reported between 1KB and 10KB for virtual service.
                         httpPerServStatsResp11KbTo50Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.10 integer32 read-only
Number of responses for which content size reported between 11KB and 50KB for virtual service.
                         httpPerServStatsResp51KbTo100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.11 integer32 read-only
Number of responses for which content size reported between 51KB and 100KB for virtual service.
                         httpPerServStatsRespLarger100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.12 integer32 read-only
Number of responses for which content size reported larger than 100KB for virtual service.
                         httpPerServStatsReqCliToAas 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.13 integer32 read-only
Number of clients requests from AAS done in the measuring period for virtual service.
                         httpPerServStatsReqAasToSer 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.14 integer32 read-only
Number of AAS requests from servers done in the measuring period for virtual service.
                         httpPerServStatsRespSerToAas 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.15 integer32 read-only
Number of servers responses to AAS in the measuring period for virtual service.
                         httpPerServStatsRespAasToCli 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.16 integer32 read-only
Number of AAS responses to clients in the measuring period for virtual service.
                         httpPerServStatsTransRate 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.17 integer32 read-only
Transactions rate for virtual service.
               connmngStats 1.3.6.1.4.1.1872.2.5.4.2.24.17
                     connmngStatSummServConn 1.3.6.1.4.1.1872.2.5.4.2.24.17.1 integer32 read-only
Number of concurrent backend server connections.
                     connmngStatSummCliReq 1.3.6.1.4.1.1872.2.5.4.2.24.17.2 integer32 read-only
Number of client requests passed to AX.
                     connmngStatSummMulRatio 1.3.6.1.4.1.1872.2.5.4.2.24.17.3 integer32 read-only
Connection multiplexing ratio.
                     connmngPerServStatsTable 1.3.6.1.4.1.1872.2.5.4.2.24.17.4 no-access
A table for connection management statistics per virtual service.
                         connmngPerServStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1 no-access
The row definition for connection management statistics per virtual service table.
                             connmngPerServStatsVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.1 integer32 read-write
Virtual server number.
                             connmngPerServStatsVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.2 integer32 read-write
Virtual server service index.
                             connmngPerServStatsVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.3 integer32 read-write
Virtual server service port number.
                             connmngPerServStatsServConn 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.4 integer32 read-only
Number of concurrent backend server connections for virtual service.
                             connmngPerServStatsCliReq 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.5 integer32 read-only
Number of client requests passed to AX for virtual service.
                             connmngPerServStatsMulRatio 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.6 integer32 read-only
Connection multiplexing ratio for virtual service.
         sapStats 1.3.6.1.4.1.1872.2.5.4.2.25
               slbStatSapAslrTable 1.3.6.1.4.1.1872.2.5.4.2.25.1 no-access
The sap aslrr statistics table. This table shows the statistics of sap aslr for a particular vip.
                   slbStatSapAslrEntry 1.3.6.1.4.1.1872.2.5.4.2.25.1.1 no-access
A row in the sap aslr statistics table.
                       slbStatSapAslrIndex 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.1 integer32 read-only
The Sap Aslr table index.
                       slbStatSapAslrSampling 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.2 counter32 read-only
The number of Sap Aslr server lookups.
                       slbStatSapAslrFailure 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.3 counter32 read-only
The number of Sap Aslr server lookup failures.
                       slbStatSapAslrDeviceUpdates 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.4 counter32 read-only
The number of Alteon automated configuration updates.
                       slbStatSapAslrDeviceFailure 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.5 counter32 read-only
The number of Alteon automated configuration failure.
                       slbStatSapAslrLastAct 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.6 displaystring read-only
The Sap Aslr last activity time stamp.
     layer4Info 1.3.6.1.4.1.1872.2.5.4.3
         slbRealServerInfoTable 1.3.6.1.4.1.1872.2.5.4.3.1 no-access
The table of real server run-time information.
             slbRealServerInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.1.1 no-access
A row in the real server information table.
                 slbRealServerInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.1.1.1 integer32 read-only
The real server index
                 slbRealServerInfoIpAddr 1.3.6.1.4.1.1872.2.5.4.3.1.1.2 ipaddress read-only
IP address of the real server.
                 slbRealServerMacAddr 1.3.6.1.4.1.1872.2.5.4.3.1.1.3 physaddress read-only
The MAC address of the real server.
                 slbRealServerInfoSwitchPort 1.3.6.1.4.1.1872.2.5.4.3.1.1.4 integer32 read-only
The switch port that the real server is connected to.
                 slbRealServerInfoHealthLayer 1.3.6.1.4.1.1872.2.5.4.3.1.1.5 integer read-only
The OSI layer at which the real server functionality is verified. Enumeration: 'layer3': 3, 'layer1': 1, 'layer4': 4.
                 slbRealServerInfoOverflow 1.3.6.1.4.1.1872.2.5.4.3.1.1.6 integer read-only
The overflow state of the real server. Enumeration: 'overflow': 1, 'no-overflow': 2.
                 slbRealServerInfoState 1.3.6.1.4.1.1872.2.5.4.3.1.1.7 integer read-only
The state of the real server. Enumeration: 'disabled': 4, 'failed': 3, 'running': 2.
                 slbRealServerInfoVlan 1.3.6.1.4.1.1872.2.5.4.3.1.1.8 integer32 read-only
The VLAN that the real server belongs to.
         slbRealServerRportInfoTable 1.3.6.1.4.1.1872.2.5.4.3.3 no-access
The table of real server rport run-time information.
             slbRealServerRportInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.3.1 no-access
A row in the real server rport information table.
                 slbRealServerRportRealIndex 1.3.6.1.4.1.1872.2.5.4.3.3.1.1 integer32 read-only
The real server index
                 slbRealServerRportServIndex 1.3.6.1.4.1.1872.2.5.4.3.3.1.2 integer32 read-only
The real server service index
                 slbRealServerRportInfoRport 1.3.6.1.4.1.1872.2.5.4.3.3.1.3 integer32 read-only
The real server real port number
                 slbRealServerRportInfoState 1.3.6.1.4.1.1872.2.5.4.3.3.1.4 integer read-only
The state of the real server port. Enumeration: 'down': 2, 'slowstart': 3, 'up': 1.
                 slbRealServerRportInfoGroup 1.3.6.1.4.1.1872.2.5.4.3.3.1.5 integer read-only
The real server group number.
         slbVirtServicesInfoTable 1.3.6.1.4.1.1872.2.5.4.3.4 no-access
The table of virtual server services run-time information.
             slbVirtServicesInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.4.1 no-access
A row in the virtual service information table.
                 slbVirtServicesInfoVirtServIndex 1.3.6.1.4.1.1872.2.5.4.3.4.1.1 integer32 read-only
The virtual server index.
                 slbVirtServicesInfoSvcIndex 1.3.6.1.4.1.1872.2.5.4.3.4.1.2 integer32 read-only
The virtual service index.
                 slbVirtServicesInfoRealServIndex 1.3.6.1.4.1.1872.2.5.4.3.4.1.3 integer32 read-only
The real server index.
                 slbVirtServicesInfoVport 1.3.6.1.4.1.1872.2.5.4.3.4.1.4 integer32 read-only
The layer 4 virtual port number for the service.
                 slbVirtServicesInfoRport 1.3.6.1.4.1.1872.2.5.4.3.4.1.5 integer32 read-only
The layer 4 real port number for the service.
                 slbVirtServicesInfoState 1.3.6.1.4.1.1872.2.5.4.3.4.1.6 integer read-only
The state of the real server for this virtual service. Enumeration: 'disabled': 4, 'failed': 3, 'running': 2, 'slowstart': 5, 'blocked': 1.
                 slbVirtServicesInfoResponseTime 1.3.6.1.4.1.1872.2.5.4.3.4.1.7 integer32 read-only
The health check response time for the real server for this virtual service.
                 slbVirtServicesInfoWeight 1.3.6.1.4.1.1872.2.5.4.3.4.1.8 integer32 read-only
The real server weight.
         slbSessionInfo 1.3.6.1.4.1.1872.2.5.4.3.5
             slbSessionInfoState 1.3.6.1.4.1.1872.2.5.4.3.5.1 integer read-write
When this object is read the current state is returned. idle(2) indicates that there is no session binding table request in progress. When a read on this object returns inprogress(3) indicates that a session binding table retrieval request is in progress. Setting the value to start(1), will start a new session table retrieval operation based on the filtering criteria. complete(4) indicates that the session table has been retrieved. Once the slbSessionInfoTable is read the state should be set back to 'idle' which frees the session table buffer and others can issue a request command via SNMP. Enumeration: 'start': 1, 'idle': 2, 'inprogress': 3, 'complete': 4.
             slbSessionInfoType 1.3.6.1.4.1.1872.2.5.4.3.5.2 integer read-write
This identifies the filtering criteria for the session binding table request. all(1) : Show all session entries cip(2) : Show all session entries with source IP address cport(3) : Show all session entries with source port dip(4) : Show all session entries with destination IP address dport(5) : Show all session entries with destination port pip(6) : Show all session entries with proxy IP address pport(7) : Show all session entries with proxy port filter(8): Show all session entries with matching filter flag(9) : Show all session entries with matching flag port(10) : Show all session entries with ingress port real(11) : Show all session entries with real IP address. Enumeration: 'real': 11, 'all': 1, 'cport': 3, 'pport': 7, 'filter': 8, 'pip': 6, 'flag': 9, 'cip': 2, 'dport': 5, 'dip': 4, 'port': 10.
             slbSessionInfoIpAddr 1.3.6.1.4.1.1872.2.5.4.3.5.3 ipaddress read-write
IP address of the requested filtering criteria 0.0.0.0 if the filtering criteria is not to match session entries with the same IP address.
             slbSessionInfoFilterId 1.3.6.1.4.1.1872.2.5.4.3.5.4 integer32 read-write
This field indicates that the session is created by filtering code as a result of the IP header keys matching the filtering criteria. 0 if slbSessionInfoFilterID is not the matching criteria.
             slbSessionInfoPortId 1.3.6.1.4.1.1872.2.5.4.3.5.5 integer32 read-write
The if the filtering criteria is (port) to match all session entries with the matching ingress port or this represents the if the requested filtering criteria is to match session entries with (pport) proxy port, (cport) source port, (dport) destination port, This entry is 0 if the filtering criteria is not to match session entries with the same port.
             slbSessionInfoFlag 1.3.6.1.4.1.1872.2.5.4.3.5.6 integer read-write
If the filtering criteria is flag select one of e|l|n|p|s|t|u|w(Flag) none(20) is selected if flag is not the fitering criteria. eFlag: Indicates the session is in use and will be aged out if no traffic is received within session timeout value. lFlag: Indicates the session is a link load balance session. nFlag: Indicates the session only translates the destination MAC when forwarding client traffic to the real server. pFlag: Indicates the session is a persistent session and is not to be aged out. Fields (6), (7) and (8) are not shown for persistent session. sFlag: Indicates the session is a persistent session and the application is SSL or Cookie Pbind. tFlag: Indicates the session is TCP rate limiting per-client entry. uFlag: Indicates the session is L7 delay binding and switch is trying to open TCP connection to real server. wFlag: Indicates the session only translates the destination MAC when forwarding layer 7 WCR traffic to the real server. ruFlag: Indicates the session is a UDP rate limiting per-client entry. riFlag: Indicates the session is a ICMP rate limiting per-client entry. viFlag: Indicates the session is a SIP INVITE session. vrFlag: Indicates the session is a SIP REGISTER session. vsFlag: Indicates the session is a SIP SUBSCRIBE session. vmFlag: Indicates the session is a SIP MESSAGE session. vdFlag: Indicates the session is a SIP NAT data session. Enumeration: 'vrFlag': 12, 'none': 20, 'pFlag': 4, 'ruFlag': 9, 'wFlag': 8, 'nFlag': 3, 'vsFlag': 13, 'vmFlag': 14, 'eFlag': 1, 'vdFlag': 15, 'riFlag': 10, 'sFlag': 5, 'tFlag': 6, 'viFlag': 11, 'uFlag': 7, 'lFlag': 2.
             slbSessionInfoStringFormatFlag 1.3.6.1.4.1.1872.2.5.4.3.5.7 integer read-write
The flag which determines if the session table entries have to be formatted or (none) indicates no formatting to be done. Enumeration: 'none': 2, 'formatted': 1.
             slbSessionInfoTable 1.3.6.1.4.1.1872.2.5.4.3.5.8 no-access
The table of SLB session entries.
                 slbSessionInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.5.8.1 no-access
Information about SLB sessions.
                     slbSessionInfoSpIndex 1.3.6.1.4.1.1872.2.5.4.3.5.8.1.1 integer32 read-only
The SP which created the session.
                     slbSessionInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.5.8.1.2 integer32 read-only
The index to the slbSessionInfoTable.
                     slbSessionInfoString 1.3.6.1.4.1.1872.2.5.4.3.5.8.1.3 octet string read-only
The string representing the SLB session entries in the formatted case: The fields, (1)-(13), associated with a session, as identified in the example below are described in the following. 3, 01: 1.1.1.1 4586, 2.2.2.1 http -> 3567 3.3.3.1 http age 6 f:10 ELNPSRtUW c:# (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) 3, 01: 1.1.1.1 4586, 2.2.2.1 http -> (1) (2) (3) (4) (5) (6) 1.1.1.2 3567 3.3.3.1 http age 6 f:10 ELNPSRtUW c:# (7a) (7) (8) (9) (10) (11) (12) (13) ------------------------------------------------------------------ (1) SP number: This field indicates which SP created the session. (2) Ingress port: This field shows the physical port# of the client traffic that entered to the switch. (3) Source IP address: This field contains the source IP address from client IP packet. (4) Source port: This field identifies the TCP/UDP source port from client packet. (5) Destination IP address: This is the destination IP address from client TCP/UDP packet. For load balancing, this address is the virtual IP address. For filtering redirect, this address is the destination server's address. (6) Destination port: This field identifies the TCP/UDP destination port from client packet. (7a)Proxy IP address: This field contains the proxy IP address substituted by the switch. (7) Proxy port: This field identifies the TCP/UDP source port substituted by the switch. The switch does this substitution when Direct Access Mode is enabled or Proxy is enabled. (8) Real server IP address: For load balancing, this field contains the IP address of the real server that the switch selects to forward client packet to. If the switch does not find live server, this field is the same as destination IP address(5). e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 2.2.2.1 http age 10 For filtering, this field also shows the real server IP address. No address is shown if the filter action is Allow, Deny or NAT. It will show ALLOW, DENY or NAT instead. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 f:11 3,01: 1.1.1.1 1040, 2.2.2.1 http ALLOW age 10 f:22 (9) Server port: For load balancing, this field is the same as destination port(6) except for the RTSP UDP session. For RTSP UDP session, this server port is obtained from client-server negotiation. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 3,01: 1.1.1.1 6970, 2.2.2.1 rtsp -> 3.3.3.1 21220 age 10 P For filtering, this field is the filtering application port. It is for internal use only. This field can be urlwcr, wcr, idslb, linkslb or nonat. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 urlwcr age 4 f:123 2,07: 1.1.1.1 1706, 2.2.2.1 http -> 192.168.4.10 linklb age 8 f:10 E (10) Age: This is the session timeout value. If no packet is received within the value specified, the session is freed. e.g. age 10 - The session is aged out in 10 minutes. age < 160 - The session is aged out in 160 minutes. This < indicates that slowage is used(user configures /cfg/slb/adv/slowage) (11) Filter number: This field indicates that the session is created by filtering code as a result of the IP header keys matching the filtering criteria. (12) Flag: E: Indicates the session is in use and will be aged out if no traffic is received within session timeout value. L: Indicates the session is a link load balance session. N: Indicates the session only translates the destination MAC when forwarding client traffic to the real server. P: Indicates the session is a persistent session and is not to be aged out. Fields (6), (7) and (8) are not shown for persistent session. S: Indicates the session is a persistent session and the application is SSL or Cookie Pbind. Rt: Indicates the session is TCP rate limiting per-client entry. Ru: Indicates the session is UDP rate limiting per-client entry. Ri: Indicates the session is ICMP rate limiting per-client entry. U: Indicates the session is L7 delay binding and switch is trying to open TCP connection to real server. W: Indicates the session only translates the destination MAC when forwarding layer 7 WCR traffic to the real server. (13) Persistent session user count: This counter indicates the number of client sessions created associated with this persistent session.
             slbSessionInfoMaxSessDump 1.3.6.1.4.1.1872.2.5.4.3.5.9 integer32 read-only
The maximum number of sessions that can exist at any given time.
         gslbInfo 1.3.6.1.4.1.1872.2.5.4.3.6
             gslbInfoRemRealServerTable 1.3.6.1.4.1.1872.2.5.4.3.6.1 no-access
The Global SLB virtual server information table.
                 gslbInfoRemRealServerEntry 1.3.6.1.4.1.1872.2.5.4.3.6.1.1 no-access
A row in the Global SLB remote real server information table.
                     gslbInfoRemRealServerIdx 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.1 integer32 read-only
The remote real server number that identifies the remote real server.
                     gslbInfoRemRealServerIpAddr 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.2 ipaddress read-only
IP address of the remote real server.
                     gslbInfoRemRealServerName 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.3 displaystring read-only
The name of the remote real server.
                     gslbInfoRemRealServerState 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.4 integer read-only
The state of the remote real server. Enumeration: 'disabled': 4, 'failed': 3, 'running': 2.
             gslbInfoVirtServerTable 1.3.6.1.4.1.1872.2.5.4.3.6.2 no-access
The Global SLB virtual server information table.
                 gslbInfoVirtServerEntry 1.3.6.1.4.1.1872.2.5.4.3.6.2.1 no-access
A row in the Global SLB virtual server information table.
                     gslbInfoVirtServerIdx 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.1 integer32 read-only
The virtual server number that identifies the virtual server.
                     gslbInfoVirtServerServiceIdx 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.2 integer32 read-only
The virtual server service number that identifies the virtual service.
                     gslbInfoVirtServerRserverIdx 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.3 integer32 read-only
The real server number that identifies a remote real server. An index of 0 indicates virtual server.
                     gslbInfoVirtServerDname 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.4 displaystring read-only
The domain name of the virtual server and remote real server.
                     gslbInfoVirtServerVirtPort 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.5 integer32 read-only
The service port of the virtual server and remote real server.
                     gslbInfoVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.6 ipaddress read-only
The IP address of the virtual server or remote real server.
                     gslbInfoVirtServerResponse 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.7 integer32 read-only
The health check response time of the virtual server or remote real server.
                     gslbInfoVirtServerSessAvail 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.8 integer32 read-only
The available sessions of the virtual server or remote real server.
                     gslbInfoVirtServerSessCur 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.9 integer32 read-only
The current sessions of the virtual server or remote real server.
                     gslbInfoVirtServerSessMax 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.10 integer32 read-only
The maximum sessions supported by the virtual server or remote real server.
                     gslbInfoVirtServerSessUtil 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.11 integer read-only
The sessions utilization (current/max) of the virtual server or remote real server.
                     gslbInfoVirtServerCpuUtil 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.12 integer read-only
The CPU utilization of the virtual server or remote real server.
                     gslbInfoVirtServerRemSite 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.13 integer32 read-only
The remote site of the remote real server. For virtual server, the remote site is 0.
                     gslbInfoVirtServerWeight 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.14 integer read-only
The weight of the virtual server or remote real server.
                     gslbInfoVirtServerAvail 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.15 integer read-only
The availability of the virtual server or remote real server.
                     gslbInfoVirtServerRegion 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.16 integer read-only
The region of the virtual server or remote real server. Enumeration: 'europe': 3, 'northamerica': 1, 'caribbean': 4, 'subsahara': 6, 'unknown': 0, 'africa': 9, 'pacificrim': 5, 'southamerica': 2, 'japan': 7, 'caribbeansubsahara': 8.
             gslbInfoRemSiteTable 1.3.6.1.4.1.1872.2.5.4.3.6.3 no-access
The Global SLB remote site information table.
                 gslbInfoRemSiteEntry 1.3.6.1.4.1.1872.2.5.4.3.6.3.1 no-access
A row in the Global SLB remote site information table.
                     gslbInfoRemSiteIdx 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.1 integer32 read-only
The remote site number that identifies the remote site.
                     gslbInfoRemSitePrimaryIp 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.2 ipaddress read-only
The primary IP address of the remote site.
                     gslbInfoRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.3 ipaddress read-only
The secondary IP address of the remote site.
                     gslbInfoRemSiteName 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.4 displaystring read-only
The name of the remote site.
                     gslbInfoRemSiteState 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.5 integer read-only
The state of the remote site. Enumeration: 'disabled': 4, 'failed': 3, 'running': 2.
             gslbInfoDnsSec 1.3.6.1.4.1.1872.2.5.4.3.6.4
                 gslbInfoDnsSecKey 1.3.6.1.4.1.1872.2.5.4.3.6.4.2
                     gslbInfoDnsSecKeyTable 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1 no-access
.
                         gslbInfoDnsSecKeyEntry 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1 no-access
.
                             gslbInfoDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1.1 displaystring read-only
DNS Sec Table Key.
                             gslbInfoDnsSecKeyStatus 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1.4 integer read-only
Key status. Enumeration: 'oldKeyRemoval': 4, 'newKeyCreated': 2, 'rolloverNotRunning': 8, 'invalid': 9, 'waitDsChangeOnParent': 7, 'newZskKeyDeployed': 3, 'newKskKeyDeployed': 6, 'initRollProess': 1, 'expired': 10, 'retrDsFromParent': 5.
         wlmInfo 1.3.6.1.4.1.1872.2.5.4.3.7
             slbWlmInfoTable 1.3.6.1.4.1.1872.2.5.4.3.7.1 no-access
The table of workload manager run-time information.
                 slbWlmInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.7.1.1 no-access
A row in the workload manager information table.
                     slbWlmInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.1 integer32 read-only
The workload manager index.
                     slbWlmInfoIpAddr 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.2 ipaddress read-only
IP address of the workload manager.
                     slbWlmInfoPort 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.3 integer read-only
The port number of the workload manager.
                     slbWlmInfoState 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.4 integer read-only
The state of the workload manager. Enumeration: 'notconnected': 2, 'connected': 1.
         slbPortInfo 1.3.6.1.4.1.1872.2.5.4.3.8
             slbPortInfoTable 1.3.6.1.4.1.1872.2.5.4.3.8.1 no-access
The table of port information.
                 slbPortInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.8.1.1 no-access
A row in the port information table.
                     slbPortInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.1 integer32 read-only
Index of slb port.
                     slbPortClientState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.2 integer read-only
Client state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortSerState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.3 integer read-only
Server state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortFltState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.4 integer read-only
Filter state on the slb port . Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortRTSState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.5 integer read-only
RTS processing state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortHotStandbyState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.6 integer read-only
Hot standby state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortInterSWState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.7 integer read-only
Inter-switch processing state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortProxyState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.8 integer read-only
Proxy state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortIdSlbState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.9 integer read-only
Intrusion detection server load balancing state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortSymantecState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.10 integer read-only
Symantec Processing state on the slb port. Enumeration: 'disabled': 2, 'enabled': 1.
                     slbPortFitersAdded 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.11 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port.
         synAttackInfo 1.3.6.1.4.1.1872.2.5.4.3.9
             synAtkState 1.3.6.1.4.1.1872.2.5.4.3.9.1 integer read-only
State of the Syn Attack, represents whether it is running or not. Enumeration: 'on': 1, 'off': 2.
             synAtkInterval 1.3.6.1.4.1.1872.2.5.4.3.9.2 integer32 read-only
Specifies interval period of syn attack inspection in seconds, it returns 0 if synAtk is OFF.
             synAtkThreshhold 1.3.6.1.4.1.1872.2.5.4.3.9.3 integer32 read-only
Specifies threshold of syn attack alram, it returns 0 if synAtk is OFF .
             synAtkWarningFired 1.3.6.1.4.1.1872.2.5.4.3.9.4 integer32 read-only
Specifies number of times syn attack warnings fired.
             synAtkResponseInterval 1.3.6.1.4.1.1872.2.5.4.3.9.5 integer32 read-only
Specifies interval period of syn cookie generation in milliseconds, it returns 0 if synAtk is OFF.
             synAtkOnOff 1.3.6.1.4.1.1872.2.5.4.3.9.6 integer read-only
Globaly set SYN Protection ON/FF. Enumeration: 'on': 1, 'off': 2.
         slbFreeVirtualServerIndexInfo 1.3.6.1.4.1.1872.2.5.4.3.10 integer read-only
Retrieve the next virtual server index
         slbFreeRealGroupIndexInfo 1.3.6.1.4.1.1872.2.5.4.3.11 integer read-only
Retrieve the next server group index
         slbFreeRealServerIndexInfo 1.3.6.1.4.1.1872.2.5.4.3.12 integer read-only
Retrieve the next real server index
     layer4Oper 1.3.6.1.4.1.1872.2.5.4.4
         slbOperRealServerTable 1.3.6.1.4.1.1872.2.5.4.4.1 no-access
The table of real servers.
             slbOperRealServerEntry 1.3.6.1.4.1.1872.2.5.4.4.1.1 no-access
A row in the slbOperRealServerTable
                 slbOperRealServerIndex 1.3.6.1.4.1.1872.2.5.4.4.1.1.1 integer32 read-only
The index for the real server.
                 slbOperRealServerStatus 1.3.6.1.4.1.1872.2.5.4.4.1.1.2 integer read-write
This an action object which is used to temporarily enable/disable a real server. The real server will be returned to its configured operational mode when the switch is reset. Setting the value to 'cookiepersistant' allows cookie persistent HTTP 1.0 sessions when the real server is offline.'fastage' option is for removing the existing sessions. And 'cookiepersistentfastage' allows cookie persistent sessions and remove the existing sessions when real server is offline. Enumeration: 'cookiepersistent': 3, 'enable': 1, 'fastage': 4, 'cookiepersistentfastage': 5, 'disable': 2.
         slbOperClearSessionTable 1.3.6.1.4.1.1872.2.5.4.4.2 integer read-write
This is an action object to clear session binding table. ok(1) is returned when read. Enumeration: 'clear': 2, 'ok': 1.
         slbOperConfigSync 1.3.6.1.4.1.1872.2.5.4.4.3 integer read-write
When set to a value of 'sync(2)' it synchronizes the SLB, filter and VRRP configuration on a peer switch. To take effect, peers must be configured on the switches and the administrator password on the switches must be identical. 'ok(1)' is returned when the object os read. Enumeration: 'ok': 1, 'sync': 2.
         gslbOper 1.3.6.1.4.1.1872.2.5.4.4.4
             gslbOperQuery 1.3.6.1.4.1.1872.2.5.4.4.4.1
                 gslbOperQueryDomain 1.3.6.1.4.1.1872.2.5.4.4.4.1.1 displaystring read-write
Domain to query Global SLB selection.
                 gslbOperQuerySrcIp 1.3.6.1.4.1.1872.2.5.4.4.4.1.2 ipaddress read-write
Source Ip Address to query Global SLB selection.
                 gslbOperSendQuery 1.3.6.1.4.1.1872.2.5.4.4.4.1.3 integer read-write
Query Global SLB selection.When set to a value of Query(2) it sends Global SLB selection query.Ok(1) is returned when this object is read. Enumeration: 'query': 2, 'ok': 1.
                 gslbOperQuerySrcIpV6 1.3.6.1.4.1.1872.2.5.4.4.4.1.4 displaystring read-write
Source Ip V6 Address to query Global SLB selection. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                 gslbOperQuerySrcIpVer 1.3.6.1.4.1.1872.2.5.4.4.4.1.5 integer read-only
Source Ip Version to query Global SLB selection. Enumeration: 'ipv4': 1, 'ipv6': 2.
                 gslbOperQueryType 1.3.6.1.4.1.1872.2.5.4.4.4.1.6 integer read-write
Global SLB selection Query Type. Enumeration: 'a': 1, 'aaaa': 2.
             gslbOperAdd 1.3.6.1.4.1.1872.2.5.4.4.4.2
                 gslbOperAddDomain 1.3.6.1.4.1.1872.2.5.4.4.4.2.1 displaystring read-write
Domain to be added into Global SLB DNS Presistence cache.
                 gslbOperAddSrcIp 1.3.6.1.4.1.1872.2.5.4.4.4.2.2 ipaddress read-write
Source Ip Address to be added into Global SLB DNS Persistence cache.
                 gslbOperAddServerIp 1.3.6.1.4.1.1872.2.5.4.4.4.2.3 ipaddress read-write
Server Ip Address to be added into Global SLB DNS Persistence cache.
                 gslbOperAddEntry 1.3.6.1.4.1.1872.2.5.4.4.4.2.4 integer read-write
Add entry to Global SLB DNS persistence cache. When set to a value of add(2) Entry will be added into Global SLB DNS persistence cache. Ok(1) is returned when object is read. Enumeration: 'add': 2, 'ok': 1.
                 gslbOperAddSrcIp6 1.3.6.1.4.1.1872.2.5.4.4.4.2.5 displaystring read-write
Source Ip Address to be added into Global SLB DNS Persistence cache. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
                 gslbOperAddServerIp6 1.3.6.1.4.1.1872.2.5.4.4.4.2.6 displaystring read-write
Server IPV6 Address to be added into Global SLB DNS Persistence cache. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
             gslbOperRemove 1.3.6.1.4.1.1872.2.5.4.4.4.3 integer read-write
This is an action object to Remove all entries from Global SLB DNS persistence cache. ok(1) is returned when read. Enumeration: 'ok': 1, 'remove': 2.
             gslbOperAvPersis 1.3.6.1.4.1.1872.2.5.4.4.4.4
                 gslbOperAvPersisVirtNum 1.3.6.1.4.1.1872.2.5.4.4.4.4.1 integer read-write
Enter Virtual Server Number for which GSLB availability persistence should be enabled/disabled.
                 gslbOperAvPersisState 1.3.6.1.4.1.1872.2.5.4.4.4.4.2 integer read-write
Enable or Disable GSLB availability persistence. Enumeration: 'disabled': 2, 'enabled': 1.
                 gslbOperAvpersistence 1.3.6.1.4.1.1872.2.5.4.4.4.4.3 integer read-write
When we set to a value of 2(config),it enable/disable GSLB availability persistence for configures virtual server. Ok(1) is returned when this object is read. Enumeration: 'config': 2, 'ok': 1.
             gslbOperClear 1.3.6.1.4.1.1872.2.5.4.4.4.5 integer read-write
This is an action object when we set to a value of(2) it clear the client cache of dynamic entries. ok(1) is returned when read. Enumeration: 'clear': 2, 'ok': 1.
             gslbOperDnsSec 1.3.6.1.4.1.1872.2.5.4.4.4.6
                 gslbOperDnsSecTable 1.3.6.1.4.1.1872.2.5.4.4.4.6.1 no-access
.
                     gslbOperDnsSecEntry 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1 no-access
.
                         gslbOperDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.1 displaystring read-only
DNS Sec Table Key.
                         gslbOperDnsSecEmergencyRollover 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.2 integer read-write
By setting the value to rollover(2), DNSSEC emergency rollover procedure of a key will be Performed. Enumeration: 'rollover': 2, 'other': 1.
                         gslbOperDnsSecImmediateRollover 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.3 integer read-write
By setting the value to rollover(2), DNSSEC immediate rollover procedure of a key will be Performed. Enumeration: 'rollover': 2, 'other': 1.
         slbOperGroupRealServerTable 1.3.6.1.4.1.1872.2.5.4.4.5 no-access
The table of real server per group.
             slbOperGroupRealServerEntry 1.3.6.1.4.1.1872.2.5.4.4.5.1 no-access
A row in the Real server group table.
                 slbOperRealServGroupIndex 1.3.6.1.4.1.1872.2.5.4.4.5.1.1 integer32 read-only
The real server group index.
                 slbOperGroupRealServIndex 1.3.6.1.4.1.1872.2.5.4.4.5.1.2 integer32 read-only
The real server index.
                 slbOperGroupRealServerState 1.3.6.1.4.1.1872.2.5.4.4.5.1.3 integer read-write
This an action object which is used to temporarily enable/disable a real server in group. The real server will be returned to its configured operational mode when the switch is reset. Enumeration: 'enable': 1, 'disable': 2.
         slbOperSessionDel 1.3.6.1.4.1.1872.2.5.4.4.6
             slbOperSessionDelSrcIp 1.3.6.1.4.1.1872.2.5.4.4.6.1 ipaddress read-write
Session Source IP Address to be deleted
             slbOperSessionDelSrcPort 1.3.6.1.4.1.1872.2.5.4.4.6.2 integer read-write
Session Source Port to be deleted
             slbOperSessionDelDestIp 1.3.6.1.4.1.1872.2.5.4.4.6.3 ipaddress read-write
Session Destination IP Address to be deleted
             slbOperSessionDelDestPort 1.3.6.1.4.1.1872.2.5.4.4.6.4 integer read-write
Session Destination Port to be deleted
             slbOperSessionDelTransType 1.3.6.1.4.1.1872.2.5.4.4.6.5 integer read-write
Set a flag indicating whether Transport Type is TCP or UDP Enumeration: 'udp': 2, 'tcp': 1.
             slbOperSessionDelete 1.3.6.1.4.1.1872.2.5.4.4.6.6 integer read-write
This is an action object to delete session table entry. when set to a value of delete(2) it deletes session table entry. Ok(1) is returned when object is read. Enumeration: 'ok': 1, 'delete': 2.
         slbOperHttpCachePurgeTable 1.3.6.1.4.1.1872.2.5.4.4.7 no-access
The table of services per server.
             slbOperHttpCachePurgeEntry 1.3.6.1.4.1.1872.2.5.4.4.7.1 no-access
A row in the http cache purge service table.
                 slbOperHttpCachePurgeServerIndex 1.3.6.1.4.1.1872.2.5.4.4.7.1.1 integer32 read-only
The Http Cache purge server index.
                 slbOperHttpCachePurgeServiceIndex 1.3.6.1.4.1.1872.2.5.4.4.7.1.2 integer32 read-only
The Http Cache purge service index.
                 slbOperHttpCachePurgeURL 1.3.6.1.4.1.1872.2.5.4.4.7.1.3 displaystring read-only
Set object URL or all.
         ocspCachePurge 1.3.6.1.4.1.1872.2.5.4.4.8
             slbOperOcspCachePurge 1.3.6.1.4.1.1872.2.5.4.4.8.1 displaystring read-write
Client authentication policy id or All.