ALPINE-GEN-CARD-TDCM-MIB: View SNMP OID List / Download MIB

VENDOR: ALPINE OPTOELECTRONICS INC


 Home MIB: ALPINE-GEN-CARD-TDCM-MIB
Download as:   
SNMPv2-CONF, ALPINE-ROOT, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alpineGenCardTdcm 1.3.6.1.4.1.52326.1.2
     alpineGenCardTdcmInfosTable 1.3.6.1.4.1.52326.1.2.1 no-access
Description.
         alpineGenCardTdcmInfosEntry 1.3.6.1.4.1.52326.1.2.1.1 no-access
Description.
             gctiSlotNum 1.3.6.1.4.1.52326.1.2.1.1.1 integer32 read-only
Slot number.
             gctiWorkMode 1.3.6.1.4.1.52326.1.2.1.1.2 integer32 read-write
Work mode of TDCM. 1. Manual Mode. 2. Auto Mode.
             gctiDefaultDispersion 1.3.6.1.4.1.52326.1.2.1.1.3 integer32 read-write
The default dipersion value for line card startup.
             gctiCurrentDispersion 1.3.6.1.4.1.52326.1.2.1.1.4 integer32 read-only
Current dispersion setting.
             gctiAutoModeSwitch 1.3.6.1.4.1.52326.1.2.1.1.5 integer32 read-write
Turn on/off auto engine when current work mode is auto. 1. Turn on auto monitor and tunning for current monitor fiber. 2. Turn off auto monitor and tunning. Note, this value is only available when current work mode 'gctiWorkMode' is auto.
             gctiSaveConfig 1.3.6.1.4.1.52326.1.2.1.1.6 integer32 read-write
Save current configuration into flash for non-valatile setting. 0: Idle/Save Done. 1: Issue save command. 2: Saving. Only value 1 can be accepted in snmp set.