ALCATEL-IND1-PIM-BSR-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-PIM-BSR-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alaPimBsrMIB 1.3.6.1.4.1.6486.801.1.2.1.10.6.3
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the Bootstrap Router (BSR) mechanism for PIM routers. This MIB is based on the Internet Draft developed by the IETF PIM Working Group. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alaPimBsrNotifications 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.0
         alaPimBsrElectedBSRLostElection 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.0.1
A alaPimBsrElectedBSRLostElection trap should be generated when current E-BSR lost election to a new Candidate BSR current E-BSR, start sending BootStrap Messages. Only an E-BSR should generate this trap. This notification is generated when alaPimBsrCandidateBSRElectedBSR becomes FALSE.
         alaPimBsrCandidateBSRWinElection 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.0.2
A alaPimBsrCandidateBSRWinElection trap should be generated when a C-BSR wins BSR Election. Only an E-BSR should generate this trap. This notification is generated when alaPimBsrCandidateBSRElectedBSR becomes TRUE
     alaPimBsrObjects 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1
         alaPimBsrCandidateRPTable 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1 no-access
The (conceptual) table listing the IP multicast group prefixes for which the local router is to advertise itself as a Candidate-RP.
             alaPimBsrCandidateRPEntry 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1 no-access
An entry (conceptual row) in the alaBsrCandidateRPTable.
                 alaPimBsrCandidateRPAddressType 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.1 inetaddresstype no-access
The Inet address type of the Candidate-RP.
                 alaPimBsrCandidateRPAddress 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.2 inetaddress no-access
The (unicast) address which will be advertised as a Candidate-RP. The InetAddressType is given by the alaPimBsrCandidateRPAddressType object.
                 alaPimBsrCandidateRPGroupAddress 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.3 inetaddress no-access
The IP multicast group address which, when combined with the corresponding value of alaPimBsrCandidateRPGroupPrefixLength, identifies a group prefix for which the local router will advertise itself as a Candidate-RP. The InetAddressType is given by the alaPimBsrCandidateRPAddressType object.
                 alaPimBsrCandidateRPGroupPrefixLength 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.4 inetaddressprefixlength no-access
The multicast group address mask which, when combined with the corresponding value of alaPimBsrCandidateRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a Candidate-RP. The InetAddressType is given by the alaPimBsrCandidateRPAddressType object.
                 alaPimBsrCandidateRPBidir 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.5 truthvalue read-only
If this object is set to TRUE, this group range is advertised with this RP as a BIDIR-PIM group range. If it is set to FALSE, it is advertised as a PIM-SM group range.
                 alaPimBsrCandidateRPAdvTimer 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.6 timeticks read-only
The time remaining before the local router next sends a Candidate-RP-Advertisement to the elected BSR for this address type.
                 alaPimBsrCandidateRPPriority 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.7 unsigned32 read-only
The priority for this Candidate RP advertised in Candidate-RP-Advertisements.
                 alaPimBsrCandidateRPAdvInterval 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.8 unsigned32 read-only
A Candidate RP generates Candidate-RP-Advertisements periodically. This object represents the time interval in seconds between two consecutive advertisements.
                 alaPimBsrCandidateRPHoldtime 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.9 unsigned32 read-only
Holdtime for this Candidate RP. The amount of time (in seconds) this Candidate-RP entry is valid.
                 alaPimBsrCandidateRPStatus 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.10 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table.
         alaPimBsrElectedBSRRPSetTable 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2 no-access
The (conceptual) table listing BSR-specific information about PIM group mappings learned via C-RP advertisements or created locally using configurations. This table is maintained only on the Elected BSR. An Elected BSR uses this table to create Bootstrap Messages after applying a local policy to include some or all of the group mappings in this table.
             alaPimBsrElectedBSRRPSetEntry 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1 no-access
An entry (conceptual row) in the alaPimBsrElectedBSRRPSetTable.
                 alaPimBsrElectedBSRGrpMappingAddrType 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.2 inetaddresstype no-access
The Inet address type of the IP multicast group prefix.
                 alaPimBsrElectedBSRGrpMappingGrpAddr 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.3 inetaddress no-access
The IP multicast group address which, when combined with alaPimBsrElectedBSRGrpMappingGrpPrefixLen, gives the group prefix for this mapping. The InetAddressType is given by the alaPimBsrElectedBSRGrpMappingAddrType object. This address object is only significant up to alaPimBsrElectedBSRGrpMappingGrpPrefixLen bits. The remainder of the address bits are zero. This is especially important for this field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry.
                 alaPimBsrElectedBSRGrpMappingGrpPrefixLen 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.4 inetaddressprefixlength no-access
The multicast group prefix length that, when combined with alaPimBsrElectedBSRGrpMappingGrpAddr, gives the group prefix for this mapping. The InetAddressType is given by the alaPimBsrElectedBSRGrpMappingAddrType object. If alaPimBsrElectedBSRGrpMappingAddrType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If alaPimBsrElectedBSRGrpMappingAddrType is 'ipv6' or 'ipv6z', this object must be in the range 8..128.
                 alaPimBsrElectedBSRGrpMappingRPAddr 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.5 inetaddress no-access
The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the alaPimBsrElectedBSRGrpMappingAddrType object.
                 alaPimBsrElectedBSRRPSetPriority 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.6 unsigned32 read-only
The priority for RP. Numerically higher values for this object indicate lower priorities, with the value zero denoting the highest priority.
                 alaPimBsrElectedBSRRPSetHoldtime 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.7 unsigned32 read-only
The holdtime for RP
                 alaPimBsrElectedBSRRPSetExpiryTime 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.8 timeticks read-only
The minimum time remaining before this entry will be aged out. The value zero indicates that this entry will never be aged out.
                 alaPimBsrElectedBSRRPSetGrpBidir 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.9 truthvalue read-only
If this object is TRUE, this group range with this RP is a BIDIR-PIM group range. If it is set to FALSE, it is a PIM-SM group range.
         alaPimBsrCandidateBSRTable 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3 no-access
The (conceptual) table containing Candidate-BSR configuration for the local router. The table contains one row for each address family for which the local router is to advertise itself as a Candidate-BSR.
             alaPimBsrCandidateBSREntry 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1 no-access
An entry (conceptual row) in the alaPimBsrCandidateBSRTable.
                 alaPimBsrCandidateBSRAddressType 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.1 inetaddresstype no-access
The address type of the Candidate-BSR.
                 alaPimBsrCandidateBSRAddress 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.2 inetaddress read-only
The (unicast) address which the local router will use to advertise itself as a Candidate-BSR. The InetAddressType is given by the alaPimBsrCandidateBSRAddressType object.
                 alaPimBsrCandidateBSRPriority 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.3 unsigned32 read-only
The priority value for the local router as a Candidate-BSR for this address type. Numerically higher values for this object indicate higher priorities.
                 alaPimBsrCandidateBSRHashMaskLength 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.4 unsigned32 read-only
The hash mask length (used in the RP hash function) that the local router will advertise in its Bootstrap messages for this address type. This object defaults to 30 if alaPimBsrCandidateBSRAddressType is 'ipv4' or 'ipv4z' , and defaults to 126 if alaPimBsrCandidateBSRAddressType is 'ipv6' or 'ipv6z'.
                 alaPimBsrCandidateBSRElectedBSR 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.5 truthvalue read-only
Whether the local router is the elected BSR for this address type.
                 alaPimBsrCandidateBSRBootstrapTimer 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.6 timeticks read-only
The time remaining before the local router next originates a Bootstrap message for this address type. Value of this object is zero if alaPimBsrCandidateBSRElectedBSR is 'FALSE'.
                 alaPimBsrCandidateBSRStatus 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.7 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table.
         alaPimBsrElectedBSRTable 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4 no-access
The (conceptual) table containing information about elected BSRs. The table contains one row for each address family for which there is an elected BSR.
             alaPimBsrElectedBSREntry 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1 no-access
An entry (conceptual row) in the alaPimBsrElectedBSRTable.
                 alaPimBsrElectedBSRAddressType 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.1 inetaddresstype no-access
The address type of the elected BSR.
                 alaPimBsrElectedBSRAddress 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.2 inetaddress read-only
The (unicast) address of the elected BSR. The InetAddressType is given by the alaPimBsrElectedBSRAddressType object.
                 alaPimBsrElectedBSRPriority 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.3 unsigned32 read-only
The priority value for the elected BSR for this address type. Numerically higher values for this object indicate higher priorities.
                 alaPimBsrElectedBSRHashMaskLength 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.4 unsigned32 read-only
The hash mask length (used in the RP hash function) advertised by the elected BSR for this address type.
                 alaPimBsrElectedBSRExpiryTime 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.5 timeticks read-only
The minimum time remaining before the elected BSR for this address type will be declared down.
     alaPimBsrConformance 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2
         alaPimBsrCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.1
             alaPimBsrCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.1.1
The compliance statement for PIM routers that implement the Bootstrap Router (BSR) mechanism.
         alaPimBsrGroups 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.2
             alaPimBsrObjectGroup 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.2.1
A collection of objects for managing PIM routers.
             alaPimBsrDiagnosticsGroup 1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.2.2
Objects providing additonal diagnostics related to BSR mechanism of PIM router.