ALCATEL-IND1-OSPF-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-OSPF-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, OSPF-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1OSPFMIB 1.3.6.1.4.1.6486.801.1.2.1.10.4.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global OSPF Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1OSPFMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1
Branch For Open Shortest Path First (OSPF) Subsystem Managed Objects.
         alaProtocolOspf 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1
             alaOspfRedistAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.1 integer read-write
Enable or disable redistribution of routes into OSPF. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'enable': 1, 'disable': 2.
             alaOspfRedistRouteTag 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.2 integer read-write
A 32-bit value tagged to each OSPF internal route that is redistributed in to other routing protocol domains. The lower 16-bits typically indicate the autonomous system number.
             alaOspfTimerSpfDelay 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.3 integer read-write
Number of seconds to delay the SPF calculation after receiving a topology change. This value should not be greater than SPF hold time.
             alaOspfTimerSpfHold 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.4 integer read-write
Minimum time, in seconds, between two consecutive SPF calculations. This value should not be less than SPF delay time.
             alaOspfRouteNumber 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.7 counter32 read-only
The number of network routes in OSPF routing table.
             alaOspfMTUCheck 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.8 integer read-write
Enable or disable the check for MTU size in database description packets. Disabled by default Enumeration: 'enable': 1, 'disable': 2.
             alaOspfAsBdrRtr 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.9 integer read-write
Enable or disable the switch being configured as an ASBR (Autonomous System Border Router. NOT SUPPORTED - Use IETF_OSPF.mib variable ospfASBdrRtrStatus. Enumeration: 'enable': 1, 'disable': 2.
             alaOspfRedistProtoTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10 no-access
Protocol based configuration for route redistribution using OSPF. This table has been deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib.
                   alaOspfRedistProtoEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1 no-access
A range of routes from a protocol to be redistributed using OSPF. This entry has been deprecated. Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib.
                       alaOspfRedistProtoId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.1 integer read-only
The routing mechanism via which the routes, to be redistributed using OSPF, are learned. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'directHost': 4, 'ospf': 6, 'rip': 5, 'bgp': 8, 'other': 1, 'static': 3, 'ospf8': 230, 'ospf4': 102, 'ospf5': 134, 'isis': 7, 'ospf7': 198, 'ospf6': 166, 'local': 2, 'ospf3': 70, 'ospf2': 38.
                       alaOspfRedistProtoSubnets 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.2 integer read-write
Enable/disable the reditribution of subnet routes. Default value is enable. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'enable': 1, 'disable': 2.
                       alaOspfRedistProtoMetricType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.3 integer read-write
Type of metric to be used for redistribution. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'type1': 1, 'type2': 2.
                       alaOspfRedistProtoMetric 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.4 integer read-write
Default metric to be used for redistributing routes using type1 metric type. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                       alaOspfRedistProtoStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.5 rowstatus read-write
Row status of this entry. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                       alaOspfRedistProtoRouteTag 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.6 counter32 read-only
Associated route tag. This object has been deprecated.
             alaOspfRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12 no-access
OSPF routing table which contains the network routes.
                   alaOspfRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1 no-access
OSPF routing table which contains the network routes.
                       alaOspfRouteDest 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.1 ipaddress read-only
The destination IP address of this route.
                       alaOspfRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.2 ipaddress read-only
The network mask for this route.
                       alaOspfRouteTos 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.3 integer read-only
Type Of Service (TOS) for this route.
                       alaOspfRouteNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.4 ipaddress read-only
The address of the next hop to reach this route.
                       alaOspfRouteIfIndex 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.5 integer read-only
The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
                       alaOspfRouteType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.6 integer read-only
The type of route. Enumeration: 'nssaExternalType1': 5, 'interArea': 2, 'externalType2': 4, 'nssaExternalType2': 6, 'intraArea': 1, 'externalType1': 3.
                       alaOspfRouteAge 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.7 timeticks read-only
The number of seconds since this route was last updated or otherwise determined to be correct.
                       alaOspfRouteTag 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.8 integer read-only
The associated route tag for external roues. It's 0 for routes internal to the autonomous system.
                       alaOspfRouteMetric1 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.9 integer read-only
The primary routing metric for this route.
                       alaOspfRouteMetric2 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.10 integer read-only
An alternate routing metric for this route. It's 0 for internal routes. For an external route, it's the metric to reach the ASBR that announced the external route.
                       alaOspfRouteStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.11 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
             alaOspfBdrRouterTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13 no-access
OSPF routing table which contains the routes to border (ABR and ASBR) routers.
                   alaOspfBdrRouterEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1 no-access
OSPF routing table which contains the routes to border (ABR and ASBR) routers.
                       alaOspfBdrRouterAreaId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.1 ipaddress read-only
The area to which the border router belongs to.
                       alaOspfBdrRouterId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.2 ipaddress read-only
The router idenitifer of this border router.
                       alaOspfBdrRouterTos 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.3 integer read-only
Type Of Service (TOS) for this route.
                       alaOspfBdrRouterNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.4 ipaddress read-only
The address of the next hop to reach this border router.
                       alaOspfBdrRouterIfIndex 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.5 integer read-only
The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
                       alaOspfBdrRouterType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.6 integer read-only
The type of border router. Enumeration: 'asbr': 2, 'abr': 1, 'abrAsbr': 3.
                       alaOspfBdrRouterAge 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.7 timeticks read-only
The number of seconds since this route was last updated or otherwise determined to be correct.
                       alaOspfBdrRouterMetric 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.8 integer read-only
The cost to reach the border router.
                       alaOspfBdrRouterStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.9 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
             alaOspfRedistRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14 no-access
A configuration table which controls the routes to be redistributed by OSPF from other routing protocols. This table has been deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib.
                   alaOspfRedistRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1 no-access
A configuration table which controls the routes to be redistributed by OSPF from other routing protocols. This entry has been deprecated. Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib.
                       alaOspfRedistRouteProto 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.1 integer read-write
Protocol from which this route is to be imported into OSPF. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'isis': 7, 'rip': 5, 'bgp': 8, 'other': 1, 'static': 3, 'local': 2, 'directHost': 4.
                       alaOspfRedistRouteDest 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.2 ipaddress read-only
The destination IP address of this route. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                       alaOspfRedistRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.3 ipaddress read-only
The network mask for this route. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                       alaOspfRedistRouteMetric 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.4 integer read-write
The metric to be used for the redistributed route. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                       alaOspfRedistRouteControl 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.5 integer read-write
Specifies how routes matching this entry are to be redistributed into OSPF. The different mechanisms possible are to redistribute all the subnet routes, redistribute an aggregated route if there are one or more actual routes which match this entry or redistribute only an exactly matching route. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'redistributeAsAggregate': 2, 'redistributeAllSubnets': 1, 'redistributeExactMatch': 3.
                       alaOspfRedistRouteTagMatch 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.6 integer read-write
Redistribute the route only when the route tag matches with this value. It defaults to 0 which matches all route tags. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                       alaOspfRedistRouteEffect 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.7 integer read-write
Specifies whether the redistribution of routes in this range is allowed or denied. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'doNotRedistribute': 2, 'redistribute': 1.
                       alaOspfRedistRouteStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.8 rowstatus read-write
The row status variable, used according to row installation and removal conventions. This object has been deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
             alaOspfIfMd5Table 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16 no-access
The OSPF Interface MD5 Table describes the MD5 key management for OSPF interfaces.
                   alaOspfIfMd5Entry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1 no-access
The OSPF Interface MD5 Entry describes the MD5 key management for OSPF interfaces.
                       alaOspfIfMd5IpAddress 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.1 ipaddress read-only
The IP address of this OSPF MD5 key interface.
                       alaOspfIfMd5KeyId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.2 integer read-only
A key identifier which identifies the algorithm and MD5 secret key associated with this interface.
                       alaOspfIfMd5Key 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.3 octet string read-write
The MD5 message digest key.
                       alaOspfIfMd5KeyStartAccept 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.4 timeticks read-write
The time that OSPF router will start accepting packets that have been created with this key.
                       alaOspfIfMd5KeyStopAccept 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.5 timeticks read-write
The time that OSPF router will stop accepting packets that have been created with this key.
                       alaOspfIfMd5KeyStartGenerate 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.6 timeticks read-write
The time that OSPF router will start using this key for packet generation.
                       alaOspfIfMd5KeyStopGenerate 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.7 timeticks read-write
The time that OSPF router will stop using this key for packet generation.
                       alaOspfIfMd5RowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.8 rowstatus read-write
Row status of this entry.
                       alaOspfIfMd5EncryptKey 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.9 alaauthenticationencryptkey read-write
The MD5 message digest Encrypted key.
             alaOspfIfAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17 no-access
Expansion for ospfIfTable
                   alaOspfIfAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1 no-access
An entry of alaOspfIfAugTable
                       alaOspfIfEncryptKey 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.1 alaauthenticationencryptkey read-only
The authentication encryption key that is used to decypher OSPF passwords.
                       alaOspfIfIpMask 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.2 ipaddress read-only
The IP mask of this OSPF interface.
                       alaOspfIfVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.3 integer32 read-only
Vlan Identifier associated with this interface
                       alaOspfIfDrRouterid 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.4 ipaddress read-only
Router Id of Designated router for this interface
                       alaOspfIfBdrRouterid 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.5 ipaddress read-only
Router Id of Backup Designated router for this interface
                       alaOspfIfMTU 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.6 counter32 read-only
Max Transfer size of OSPF packets on this interface
                       alaOspfIfInitNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.7 counter32 read-only
Number of ospf INIT state neighbors on this interface
                       alaOspfIfExchNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.8 counter32 read-only
Number of ospf EXCHANGE state neighbors on this interface
                       alaOspfIfFullNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.9 counter32 read-only
Number of ospf FULL state neighbors on this interface
                       alaOspfIfLinkType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.10 integer read-only
Type of physical medium used for transmission of OSPF packets Enumeration: 'broadcast': 1.
                       alaOspfIfOperStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.11 integer read-only
Operational status of this interface Enumeration: 'down': 0, 'up': 1.
                       alaOspfIfIntfName 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.12 displaystring read-only
The user defined name used to identify the IP interface
                       alaOspfIf2WayNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.13 counter32 read-only
Number of ospf 2-WAY state neighbors on this interface
                       alaOspfIfBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.14 integer read-only
Enables/Disables OSPF for a BFD interface Enumeration: 'enable': 1, 'disable': 2.
                       alaOspfIfBfdDrsOnly 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.15 integer read-only
Enables/Disables Drs Only option for a BFD interface Enumeration: 'enable': 1, 'disable': 2.
             alaOspfVirtIfAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18 no-access
Expansion for ospfVirtIfTable
                   alaOspfVirtIfAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1 no-access
An entry of alaOspfVirtIfAugTable
                       alaOspfVirtIfEncryptKey 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1.1 alaauthenticationencryptkey read-only
The authentication encryption key that is used to decypher OSPF passwords.
                       alaOspfVirtIfOperStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1.2 integer read-only
Operational status of the virtual link Enumeration: 'down': 0, 'up': 1.
             alaOspfRestartHelperSupport 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.19 integer read-write
The router's support for acting as an OSPF hitless restart helper. Enumeration: 'enable': 1, 'disable': 2.
             alaOspfRestartHelperStrictLSAChecking 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.20 integer read-write
Indicates whether or not a changed LSA will result in termination of graceful restart by a helping router. Enumeration: 'enable': 1, 'disable': 2.
             alaOspfRestartHelperStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.21 integer read-only
Indicates whether this OSPF router is operating as a Helper to a restarting router. Enumeration: 'helping': 1, 'notHelping': 2.
             alaOspfRFC1583Compatibility 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.22 truthvalue read-only
Indicates metrics used to choose among multiple AS- external-LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external-LSAs advertising the same destination. When RFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties.
             alaOspfOpaqueLsaSupport 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.23 truthvalue read-only
The router's support for Opaque LSA types.
             alaOspfTrafficEngineeringSupport 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.24 truthvalue read-only
The router's support for OSPF traffic engineering.
             alaOspfReferenceBandwidth 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.25 unsigned32 read-only
Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS)
             alaOspfRestartSupport 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.26 integer read-write
The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. Enumeration: 'plannedAndUnplanned': 3, 'none': 1, 'plannedOnly': 2.
             alaOspfRestartInterval 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.27 integer32 read-write
Configured OSPF hitless restart timeout interval.
             alaOspfRestartStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.28 integer read-only
Current status of OSPF hitless restart. The status of hitless restart is unplannedRestart after a CMM takeover. Before CMM takeover, the status is plannedRestart. Enumeration: 'unplannedRestart': 3, 'notRestarting': 1, 'plannedRestart': 2.
             alaOspfRestartAge 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.29 unsigned32 read-only
Remaining time in current OSPF hitless restart interval.
             alaOspfRestartExitReason 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.30 integer read-only
Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway. Enumeration: 'none': 1, 'timedOut': 4, 'completed': 3, 'inProgress': 2, 'topologyChanged': 5.
             alaOspfNbrAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31 no-access
Extensions to the ospfNbrTable
                   alaOspfNbrAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1 no-access
Additions to neighbor table
                       alaOspfNbrRestartHelperStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.1 integer read-only
Indicates whether the router is acting as a hitless restart helper for the neighbor. Enumeration: 'helping': 2, 'notHelping': 1.
                       alaOspfNbrRestartHelperAge 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.2 unsigned32 read-only
Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.
                       alaOspfNbrRestartHelperExitReason 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.3 integer read-only
Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. Enumeration: 'none': 1, 'timedOut': 4, 'completed': 3, 'inProgress': 2, 'topologyChanged': 5.
                       alaOspfNbrAreaId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.4 ipaddress read-only
The area to which this neighbor belongs
                       alaOspfNbrDrAddress 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.5 ipaddress read-only
Designated router of this neighbor
                       alaOspfNbrBdrAddress 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.6 ipaddress read-only
Backup Designated router of this neighbor
                       alaOspfNbrType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.7 integer read-only
Neighbors learned via the OSPF Hello protocol are dynamic. Configured neighbors are static Enumeration: 'static': 2, 'dynamic': 1.
                       alaOspfNbrMode 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.8 integer read-only
Current neighbor mode. This is applicable only during adjacency formation Enumeration: 'master': 2, 'slave': 1, 'slaveHold': 3.
                       alaOspfNbrMd5SeqNo 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.9 counter32 read-only
Sequence number used in Md5 authentication
                       alaOspfNbrLastHello 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.10 counter32 read-only
No of seconds elapsed since the last hello was received from this neighbor
                       alaOspfNbrPendingLSreq 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.11 counter32 read-only
Number of outstanding link state requests to be sent to this neighbor
                       alaOspfNbrPendingLSack 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.12 counter32 read-only
Number of outstanding link state acknowledgements to be sent to this neighbor
                       alaOspfNbrPendingLSupd 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.13 counter32 read-only
Number of outstanding link state update packets to be sent to this neighbor
             alaOspfVirtNbrAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32 no-access
Extensions to ospfVirtNbrTable
                   alaOspfVirtNbrAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1 no-access
Information regarding a single virtual neighbor.
                       alaOspfVirtNbrRestartHelperStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.1 integer read-only
Indicates whether the router is acting as a hitless restart helper for the neighbor. Enumeration: 'helping': 2, 'notHelping': 1.
                       alaOspfVirtNbrRestartHelperAge 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.2 unsigned32 read-only
Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.
                       alaOspfVirtNbrRestartHelperExitReason 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.3 integer read-only
Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. Enumeration: 'none': 1, 'timedOut': 4, 'completed': 3, 'inProgress': 2, 'topologyChanged': 5.
                       alaOspfVirtNbrDrAddr 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.4 ipaddress read-only
Designated router of this virtual neighbor
                       alaOspfVirtNbrBdrAddr 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.5 ipaddress read-only
Backup Designated router of this virtual neighbor
                       alaOspfVirtNbrMode 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.6 integer read-only
Current neighbor mode. This is applicable only during adjacency formation Enumeration: 'master': 2, 'slave': 1, 'slaveHold': 3.
                       alaOspfVirtNbrMd5SeqNo 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.7 counter32 read-only
Sequence number used in Md5 authentication
                       alaOspfVirtNbrLastHello 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.8 counter32 read-only
No of seconds elapsed since the last hello was received from this neighbor
                       alaOspfVirtNbrPendingLSreq 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.9 counter32 read-only
Number of outstanding link state requests to be sent to this neighbor
                       alaOspfVirtNbrPendingLSack 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.10 counter32 read-only
Number of outstanding link state acknowledgements to be sent to this neighbor
                       alaOspfVirtNbrPendingLSupd 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.11 counter32 read-only
Number of outstanding link state update packets to be sent to this neighbor
             alaOspfRestartInitiate 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.33 integer read-write
Initiates a planned graceful restart, if set to plannedRestart. Enumeration: 'notRestarting': 1, 'plannedRestart': 2.
             alaOspfAreaAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35 no-access
Extensions to ospfAreaTable
                   alaOspfAreaAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1 no-access
Area table additions
                       alaOspfAreaOperStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.1 integer read-only
Operational status of the area Enumeration: 'down': 3, 'inactive': 1, 'up': 2.
                       alaOspfAreaLastSpfRun 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.2 counter32 read-only
Time in secs since last SPF ran for this area
                       alaOspfAreaActiveVlinks 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.3 counter32 read-only
Number of active virtual links in this area
                       alaOspfAreaIncrSpfRuns 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.4 counter32 read-only
The number of times that incremental SPF has been run for this area to calculate inter-area routes
                       alaOspfAreaInitNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.5 counter32 read-only
Number of ospf INIT state neighbors in this area
                       alaOspfAreaExchNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.6 counter32 read-only
Number of ospf EXCHANGE state neighbors in this area
                       alaOspfAreaFullNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.7 counter32 read-only
Number of ospf FULL state neighbors in this area
                       alaOspfAreaNumIntfs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.8 counter32 read-only
Number of interfaces in this area
                       alaOspfAreaAttachedIntfs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.9 octet string read-only
List of interfaces attached to this area
                       alaOspfArea2WayNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.10 counter32 read-only
Number of ospf 2-WAY state neighbors in this area
                       alaOspfAreaNssaTranslatorRole 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.11 integer read-only
Specifies whether or not an NSSA border router will unconditionally translate Type-7 LSAs into Type-5 LSAs. When set to always, an NSSA border router always translates Type-7 LSAs into Type-5 LSAs regardless of the translator state of other NSSA border routers. When set to candidate, an NSSA border router participates in the translator election process. For non-NSSA border routers, this value is none. Enumeration: 'always': 2, 'none': 3, 'candidate': 1.
                       alaOspfAreaNssaTranslatorStabilityInterval 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.12 integer read-only
Defines the length of time (in seconds) an elected Type-7 translator will continue to perform its translator duties once it has determined that its translator status has been deposed by another NSSA border router translator. For non-NSSA border routers, this value is not defined and will be 0.
                       alaOspfAreaNssaImportSetPbit 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.13 integer read-only
Specifies whether or not an NSSA AS boundary router sets the P-bit when external routes are imported into the NSSA as Type-7 LSAs. For non-NSSA boundary routers, this value is not defined and will be none. Enumeration: 'doNotPropagate': 2, 'none': 3, 'propagate': 1.
                       alaOspfAreaNssaTranslatorState 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.14 integer read-only
The state of the NSSA Translator, for NSSA border routers. For non-NSSA border routers, the state is none. Enumeration: 'disabled': 1, 'elected': 3, 'none': 4, 'enabled': 2.
                       alaOspfAreaNssaElectedTranslatorRouterId 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.15 ipaddress read-only
The elected/current NSSA translator router id elected by this NSSA border router. For non-NSSA border router, this object is not defined.
             alaOspfExtLsdbAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36 no-access
Extensions to ospfExtLsdbTable
                   alaOspfExtLsdbAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1 no-access
External Link state database additions
                       alaOspfExtLsdbProto 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.1 integer read-only
Protocol through which this external LSA was learnt Enumeration: 'isis': 6, 'local': 1, 'direct': 3, 'rip': 4, 'bgp': 7, 'static': 2, 'ospf': 5.
                       alaOspfExtLsdbRouteTag 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.2 counter32 read-only
A 32-bit value attached to each external route.
                       alaOspfExtLsdbFwdAddr 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.3 ipaddress read-only
The address to which data traffic for the advertised destination is to be forwarded. If the Forwarding address is set to 0.0.0.0, data traffic is to be forwarded to the LSA's originator.
                       alaOspfExtLsdbMetricType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.4 integer read-only
The type of external metric. Enumeration: 'type1': 1, 'type2': 2.
                       alaOspfExtLsdbMetric 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.5 integer32 read-only
The OSPF External TOS 0 Metric.
                       alaOspfExtLsdbLength 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.6 integer32 read-only
The length of the AS External Link-State Advertisement.
                       alaOspfExtLsdbMask 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.7 ipaddress read-only
The IP address mask for the advertised destination.
             alaOspfAreaInterfaceTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37 no-access
This table holds the mapping between area ID and the interfaces attached to it
                   alaOspfAreaInterfaceEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37.1 no-access
Lests all interfaces attached to a specific area
                       alaOspfIfIpAddress 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37.1.1 ipaddress read-only
The IP address of this OSPF interface.
                       alaOspfAddressLessIf 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37.1.2 integer32 read-only
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
             alaOspfAreaAggregateAugTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38 no-access
Extensions to ospfAreaAggregateTable
                   alaOspfAreaAggregateAugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38.1 no-access
Additions to the area aggregate table
                       alaOspfAreaAggregateMetric 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38.1.1 integer read-write
If set, this value is used as the metric for the area aggregate route, overriding the calculated metric
             alaOspfDefaultOriginate 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.39 integer read-write
Indicates whether this ASBR router originates the default route into the OSPF normal area(s). If set to 'only', the default route is advertised into the OSPF normal area, provided the ASBR has a route to 0.0.0.0/0 in its routing table. Alternatively, if set to 'always', a default route is advertised into the OSPF domain regardless of whether the ASBR has a route to 0.0.0.0/0. A value of 'none' has the effect of not originating the default route. Enumeration: 'always': 3, 'none': 1, 'only': 2.
             alaOspfDefaultOriginateMetricType 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.40 integer read-write
Type of metric to be used with the default route. Enumeration: 'type1': 1, 'type2': 2.
             alaOspfDefaultOriginateMetric 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.41 integer read-write
Default metric to be used for the default route.
             alaOspfBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.42 integer read-write
Enables or disables bfd for OSPF protocol Enumeration: 'enable': 1, 'disable': 2.
             alaOspfBfdAllInterfaceStatus 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.43 integer read-write
Enables or disables bfd for all OSPF interfaces Enumeration: 'enable': 1, 'disable': 2.
         alaOspfDebugConfig 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2
             alaOspfDebugLevel 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.1 integer32 read-write
This Object is deprecated in favour of alaDrcTmOspfDebug Configuration
             alaOspfDebugError 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.2 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugError MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugWarning 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.3 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugWarning MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugState 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.4 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugState MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugRecv 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.5 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugRecv MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugSend 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.6 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugSend MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugFlood 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.7 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugFlood MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugSPF 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.8 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugSPF MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugLsdb 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.9 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugLsdb MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugRdb 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.10 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugRdb MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugAge 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.11 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugAge MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugVlink 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.12 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugVlink MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugRedist 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.13 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugRedist MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugSummary 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.14 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugSummary MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugDbexch 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.15 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugDbexch MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugHello 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.16 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugHello MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugAuth 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.17 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugAuth MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugArea 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.18 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugArea MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugIntf 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.19 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugIntf MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugMip 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.20 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugMip MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugInfo 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.21 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugInfo MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugSetup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.22 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugSetup MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugTime 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.23 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugTime MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugTm 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.24 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugTm MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugAll 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.25 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugAll MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugRestart 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.26 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugRestart MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
             alaOspfDebugHelper 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.27 integer read-write
This Object is deprecated in favour of alaDrcTmOspfDebugHelper MIB Object of alaDrcTmOspfDebug Configuration Enumeration: 'enable': 1, 'disable': 2.
         alaOspfGeneralTable 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3
             alaOspfTotalSpfRuns 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.1 counter32 read-only
Total number of SPF runs performed on this router
             alaOspfTotalIncrSpfRuns 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.2 counter32 read-only
Total number of Incremental SPF runs performed on this router
             alaOspfTotalInitNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.3 counter32 read-only
Number of INIT state neighbors on this router
             alaOspfTotalExchNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.4 counter32 read-only
Number of EXCHANGE state neighbors on this router
             alaOspfTotalFullNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.5 counter32 read-only
Number of FULL state neighbors on this router
             alaOspfTotalAreas 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.6 counter32 read-only
Total Number of areas configured on this router
             alaOspfTotalActiveAreas 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.7 counter32 read-only
Total Number of active areas configured on this router
             alaOspfTotalTransitAreas 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.8 counter32 read-only
Number of transit areas on this router
             alaOspfTotalNSSA 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.9 counter32 read-only
Total Number of NSSA areas on this router
             alaOspfTotal2wayNbrs 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.10 counter32 read-only
Number of 2-way state neighbors on this router
     alcatelIND1OSPFMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2
Branch For Open Shortest Path First (OSPF) Subsystem Conformance Information.
         alcatelIND1OSPFMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1
Branch For Open Shortest Path First (OSPF) Subsystem Units Of Conformance.
             alaOspfMiscellaneousGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.1
Collection of Miscellaneous objects for management of OSPF.
             alaOspfRedistProtoGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.2
Collection of objects for management of Route Redistribution Protocol. These objects have been deprecated, and the group is no longer mandatory.
             alaOspfDebugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.3
Collection of objects for management of Debugging configuration.
             alaOspfRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.4
Collection of objects for management of Network Route configuration.
             alaOspfBdrRouterGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.5
Collection of objects for management of routes to Border Routers.
             alaOspfRedistRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.6
Collection of objects for management of Route Redistribution configuration. These objects have been deprecated, and the group is no longer mandatory.
             alaOspfAreaInterfaceGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.7
all interfaces attached to a specific area.
             alaOspfIfMd5Group 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.8
Collection of objects for management of Interface MD5 configuration.
             alaOspfGeneralGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.9
Collection of objects for management of Interface MD5 configuration.
             alaOspfAreaAggregateAugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.10
Additions to the area aggregate table.
             alaOspfAreaAugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.11
Area table additions.
             alaOspfExtLsdbAugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.12
External Link state database additions.
             alaOspfIfAugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.13
             alaOspfNbrAugEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.14
             alaProtocolOspfGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.15
             alaOspfVirtNbrAugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.16
         alcatelIND1OSPFMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.2
Branch For Open Shortest Path First (OSPF) Subsystem Compliance Statements.
             alcatelIND1OSPFMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.2.1
Compliance statement for Open Shortest Path First (OSPF) Subsystem.