ALCATEL-IND1-LPS-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-LPS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1LearnedPortSecurityMIB 1.3.6.1.4.1.6486.801.1.2.1.8.2
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the MIB module for address learning mac addresses entity. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1LearnedPortSecurityMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.8.2.0
Branch For LAG MIB Subsystem Notifications.
         lpsViolationTrap 1.3.6.1.4.1.6486.801.1.2.1.8.2.0.1
Learned Port Security Violation Trap.
         lpsPortUpAfterLearningWindowExpiredTrap 1.3.6.1.4.1.6486.801.1.2.1.8.2.0.2
When an LPS port joins or is enabled after the Learning Window is expired, the MAC address learning on the port will be disabled, and this trap is generated as a notification.
         lpsLearnMac 1.3.6.1.4.1.6486.801.1.2.1.8.2.0.3
When an LPS port learns a bridged MAC, this trap will be generated.
     alcatelIND1LearnedPortSecurityMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.8.2.1
Branch For Learned Port Security Module MIB Subsystem Managed Objects.
         learnedPortSecurityTable 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1 no-access
A table contains Learned Port Security information.
             learnedPortSecurityEntry 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1 no-access
Definition of the Learned Port Security port security table entries.
                 lpsViolationOption 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.1 integer read-only
The handle option for LPS violation Enumeration: 'restrict': 1, 'discard': 3, 'shutdown': 2.
                 lpsMaxMacNum 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.2 integer32 read-only
The maximum number of MAC addresses that the LPS port could learn.
                 lpsLoMacRange 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.3 macaddress read-only
The low end of Mac range which is allowed to be learned on LPS port
                 lpsHiMacRange 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.4 macaddress read-only
The high end of Mac range which is allowed to be learned on LPS port
                 lpsAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.5 integer read-only
This object specifies the desired administrative state of the Learned Port Security feature on this port. Enumeration: 'disabled': 2, 'locked': 3, 'enabled': 1.
                 lpsOperStatus 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.6 integer read-only
This object identifies the current operational state of the LPS port. Enumeration: 'down': 2, 'securityViolated': 3, 'up': 1.
                 lpsRowStatus 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.7 rowstatus read-only
The RowStatus for this table.
                 lpsRelease 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.8 integer read-only
This object causes the release of LPS port if it is in violated state. Enumeration: 'release': 1.
                 lpsMaxFilteredMacNum 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.9 integer32 read-only
The maximum number of Filtered MAC addresses that the LPS port could learn. The default is 5.
                 lpsLearnTrapThreshold 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.10 integer32 read-only
When the number of bridged MACs learned goes over this value, a trap will be generated for every additional MAC that is learned.
                 lpsViolatingMac 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.1.1.11 macaddress read-only
The MAC Address which cause the Violation on this Port. This field is set when LPS port is in Violated state, it is cleared when Port comes out of violation
         learnedPortSecurityGlobalGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3
             lpsLearningWindowTime 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.1 integer32 read-write
The learning time window that can be configured on the switch to learn new MACs on the LPS port. This paramater applies to the whole switch and the granularity is in minutes.
             lpsLearningWindowTimeWithStaticConversion 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.2 integer read-write
If it is enabled, when the learning window is expired, the dynamic MACs learned on all LPS ports will be converted to static. It is configurable only when the learning window is enabled. Enumeration: 'enable': 1, 'disable': 2.
             lpsConvertToStatic 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.3 integer32 read-write
It converts the L2 addresses learned on the given port in IfIndex format from dynamic to static, Value 2147483647 converts the L2 addresses learned for all ports.
             lpsLearningWindowNoAging 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.4 integer read-write
If it is enabled, all mac-address learnt on the port would be deffered from aging Enumeration: 'enable': 1, 'disable': 2.
             lpsLearningWindowBootupStatus 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.5 integer read-write
If it is enabled, Learning window will start at boot-up time Enumeration: 'enable': 1, 'disable': 2.
             lpsLearningWindowTimeRemaining 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.3.6 integer32 read-only
Amount of time (in seconds) remaining until the learning window expires.
         learnedPortSecurityL2MacAddressTable 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4 no-access
A table contains Learned Port Security L2 Mac addresses.
             learnedPortSecurityL2MacAddressEntry 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1 no-access
Definition of the Learned Port Security port security mac-address table entries.
                 lpsL2VlanId 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.1 integer32 no-access
The Vlan Id assigned to the packet.
                 lpsL2MacAddress 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.2 macaddress no-access
The MacAddress that is either configured or dynamically learnt on the LPS port.
                 lpsL2MacAddressLearnType 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.3 integer read-only
Learned L2 MAC address type. Enumeration: 'filtered': 3, 'configured': 1, 'dynamic': 2, 'quarantined': 4.
                 lpsL2MacAddressRowStatus 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.4.1.4 rowstatus read-only
The RowStatus for this table.
         lpsTrapsObj 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5
             lpsTrapSwitchName 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.1 snmpadminstring read-only
The name of the switch.
             lpsTrapSwitchIpAddr 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.2 ipaddress read-only
The IP address of switch.
             lpsTrapSwitchSlice 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.3 integer32 read-only
The physical slice number for the LPS port on which violation occured.
             lpsTrapSwitchPort 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.4 integer32 read-only
The physical port number on which violation occured.
             lpsTrapViolatingMac 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.5 macaddress read-only
The violating MAC address.
             lpsTrapViolationType 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.6 integer read-only
The type of violation that occured on the LPS port. Enumeration: 'restrict': 1, 'discard': 3, 'shutdown': 2.
             lpsTrapSwitchVlan 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.7 integer32 read-only
The VLAN number on which violation occured.
             lpsTrapBridgeMac 1.3.6.1.4.1.6486.801.1.2.1.8.2.1.5.8 macaddress read-only
The Bridge MAC address when learn trap threshold exceeds.
     alcatelIND1LearnedPortSecurityMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.8.2.2
Branch for Learned Port Security Module MIB Subsystem Conformance Information.
         alcatelIND1LearnedPortSecurityMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1
Branch for Learned Port Security Module MIB Subsystem Units of Conformance.
             learnedPortSecurityGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.1
Collection of objects for learned port security table.
             learnedPortSecurityGlobGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.2
Collection of objects for learned port security global group.
             learnedPortSecurityTrapsGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.3
Collection of notifications for learned port security.
             learnedPortSecurityL2MacAddressGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.4
Collection of objects for learned port security MacAddress table.
             learnedPortSecurityTrapsObjGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.6
Collection of objects for learned port security Notofocation Object Group.
             learnedPortSecurityNotificationGroup 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.1.7
Collection of notifications for LPS.
         alcatelIND1LearnedPortSecurityMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.2
Branch for Learned Port Security Module MIB Subsystem Compliance Statements.
             alcatelIND1LearnedPortSecurityMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.8.2.2.2.1
Compliance statement for Learned Port Security.