ALCATEL-IND1-IPX-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-IPX-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1IPXMIB 1.3.6.1.4.1.6486.801.1.2.1.10.8.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This is the proprietary MIB for the IPX routing sub-sytem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1IPXMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1
         alaIpxRoutingGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1
IPX routing information.
             alaIpxStaticRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1 no-access
The Static Routes table is used and add entries and extract information from the static routes configured in the system.
                 alaIpxStaticRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1 no-access
Each entry corresponds to one static route.
                     alaIpxStaticRouteNetNum 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1.1 netnumber no-access
The IPX network number of the route's destination.
                     alaIpxStaticRouteNextHopNet 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1.2 netnumber read-only
The IPX network number of the router used to reach the first hop in the static route.
                     alaIpxStaticRouteNextHopNode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1.3 hostaddress read-only
The IPX node number of the router used to reach the first hop in the static route.
                     alaIpxStaticRouteTicks 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1.4 integer read-only
The delay, in ticks, to reach the route's destination.
                     alaIpxStaticRouteHopCount 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1.5 integer read-only
The number of hops necessary to reach the destination.
                     alaIpxStaticRouteRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.1.1.6 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxStaticRouteTable is constrained by the operational state of the corresponding static route. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaIpxDefRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.2 no-access
The default route table contains information about the destinations to which all packets are sent when the destination network is not known.
                 alaIpxDefRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.2.1 no-access
One table entry per switch for default route.
                     alaIpxDefRouteVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.2.1.1 integer no-access
The VlanId for this filter. If VlanId equals 0, the filter is applied globally.
                     alaIpxDefRouteNet 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.2.1.2 netnumber read-only
The IPX network number of the router used to reach the first hop in the default route.
                     alaIpxDefRouteNode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.2.1.3 hostaddress read-only
The IPX node number of the router used to reach the first hop in the default route.
                     alaIpxDefRouteRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.2.1.4 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxDefRouteTable is constrained by the operational state of the corresponding default route entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaIpxExtMsgTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.3 no-access
The extended RIP and SAP messages table contains information about which vlans use extended RIP and SAP packets.
                 alaIpxExtMsgEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.3.1 no-access
One table entry per Vlan.
                     alaIpxExtMsgVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.3.1.1 integer no-access
The VlanId for this filter. If VlanId equals 0, the filter is applied globally.
                     alaIpxExtMsgMode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.3.1.2 integer read-only
Indicates whether extended RIP/SAP packets are sent and received. Enumeration: 'disabled': 1, 'enabled': 2.
                     alaIpxExtMsgRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.3.1.3 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxExtMsgTable is constrained by the operational state of the corresponding watchdog entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaIpxFlush 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.1.4 integer read-write
Flushes the routing and the SAP tables. The tables will then be rebuilt from the broadcast messages received from the networks. Reading this variable is undefined Enumeration: 'both': 3, 'sap': 2, 'rip': 1.
         alaIpxFilterGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2
IPX filtering information.
             alaIpxRipSapFilterTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1 no-access
The IPX Rip/Sap Filter Table contains information about all filters that have been defined.
                 alaIpxRipSapFilterEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1 no-access
Each entry corresponds to one filter.
                     alaIpxRipSapFilterVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.1 integer no-access
The VlanId for this filter. If VlanId equals 0, the filter is applied globally.
                     alaIpxRipSapFilterType 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.2 integer no-access
The type of filter. Enumeration: 'gnsOutput': 3, 'ripInput': 5, 'sapInput': 2, 'sapOutput': 1, 'ripOutput': 4.
                     alaIpxRipSapFilterNet 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.3 netnumber no-access
The IPX Network Address to filter. A network address of all 0 's is used to denote All Networks.
                     alaIpxRipSapFilterNetMask 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.4 netnumber no-access
The IPX Network Mask to be used.
                     alaIpxRipSapFilterNode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.5 hostaddress no-access
The IPX node address to filter. A node address of all 0 's is used to denote All Nodes.
                     alaIpxRipSapFilterNodeMask 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.6 hostaddress no-access
The IPX node address mask to be used.
                     alaIpxRipSapFilterSvcType 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.7 integer no-access
The SAP service type on which to filter. The SAP service types are defined by Novell.A value of ALL(65535) indicates that all services will be filtered.
                     alaIpxRipSapFilterMode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.8 integer read-only
The action defined by this filter. block (1) means packets matching this filter will be blocked, and allow(0) means that packets matching this filter will be allowed. Enumeration: 'block': 2, 'allow': 1.
                     alaIpxRipSapFilterRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.1.1.10 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxRipSapFilterTable is constrained by the operational state of the corresponding filter entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaIpxWatchdogSpoofTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.2 no-access
The IPX Watchdog Spoofing Table contains information about all of the current IPX WAN watchdog spoofing entry statuses.
                 alaIpxWatchdogSpoofEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.2.1 no-access
Each entry corresponds to one WAN routing service.
                     alaIpxWatchdogSpoofVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.2.1.1 integer no-access
The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans.
                     alaIpxWatchdogSpoofMode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.2.1.2 integer read-only
This controls whether the IPX Watchdog Spoofing is enabled or disabled.When enabled, this routing service will spoof IPX Watchdog packets.When disabled, this routing service will not spoof IPX Watchdog packets. Enumeration: 'disabled': 1, 'enabled': 2.
                     alaIpxWatchdogSpoofRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.2.1.3 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxWatchdogSpoofTable is constrained by the operational state of the corresponding watchdog entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaIpxSerialFilterTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.3 no-access
The IPX Serialization Filtering Table contains information about all of the current IPX WAN serialization filtering entry statuses.
                 alaIpxSerialFilterEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.3.1 no-access
Each entry corresponds to one WAN routing service.
                     alaIpxSerialFilterVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.3.1.1 integer no-access
The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans.
                     alaIpxSerialFilterMode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.3.1.2 integer read-only
This controls whether the IPX Serialization Filtering is enabled or disabled.When enabled, this routing service will filter IPX Serialization packets.When disabled, this routing service will not filter IPX Serialization packets. Enumeration: 'disabled': 1, 'enabled': 2.
                     alaIpxSerialFilterRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.3.1.3 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxSerialFilterTable is constrained by the operational state of the corresponding filter entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaSpxKeepaliveSpoofTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.4 no-access
The SPX Keepalive Spoofing Table contains information about all of the current IPX WAN SPX spoofing filtering entry statuses.
                 alaSpxKeepaliveSpoofEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.4.1 no-access
Each entry corresponds to one WAN routing service.
                     alaSpxKeepaliveSpoofVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.4.1.1 integer no-access
The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans.
                     alaSpxKeepaliveSpoofMode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.4.1.2 integer read-only
This controls whether the SPX Keepalive Spoofing is enabled or disabled.When enabled, this routing service will spoof SPX Keepalive packets.When disabled, this routing service will not spoof SPX Keepalive packets. Enumeration: 'disabled': 1, 'enabled': 2.
                     alaSpxKeepaliveSpoofRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.4.1.3 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxKeepaliveSpoofTable is constrained by the operational state of the corresponding keepalive entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
             alaIpxType20Table 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.5 no-access
The IPX Type 20 Table contains information about all of the current Type 20 filtering entry statuses.
                 alaIpxType20Entry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.5.1 no-access
Each entry corresponds to one Virtual LAN.
                     alaIpxType20VlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.5.1.1 integer no-access
The VLAN Id of the routing interface that this entry applies to. If VlanId equals 0, the filter is applied globally.
                     alaIpxType20Mode 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.5.1.2 integer read-only
This controls whether IPX Type 20 packet are enabled or disabled.When enabled, this routing interface will forward Type 20 packets.When disabled, the packets will not. Enumeration: 'disabled': 1, 'enabled': 2.
                     alaIpxType20RowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.2.5.1.3 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxType20Table is constrained by the operational state of the corresponding type 20 entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
         alaIpxTimerGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3
IPX timer information.
             alaIpxTimerTable 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3.1 no-access
The IPX Timer Table contains information about all of the current Timer adjustments entry statuses.
                 alaIpxTimerEntry 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3.1.1 no-access
Each entry corresponds to one Virtual LAN.
                     alaIpxTimerVlanId 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3.1.1.1 integer no-access
The VLAN Id of the routing interface that this entry applies to. If VlanId equals 0, the filter is applied globally.
                     alaIpxTimerSap 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3.1.1.2 integer read-only
This controls whether IPX SAP packet timer duration.
                     alaIpxTimerRip 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3.1.1.3 integer read-only
This controls whether IPX RIP packet timer duration.
                     alaIpxTimerRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.1.3.1.1.4 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxTimerTable is constrained by the operational state of the corresponding timer entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system.
     alcatelIND1IPXMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2
         alcatelIND1IPXMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.1
             alcatelIND1IPXMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.1.1
The compliance statement for IPX Subsystem and ALCATEL-IND1-IPX-MIB.
         alcatelIND1IPXMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2
             alcatelIND1IPXMIBStaticRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.1
A collection of objects from Static Route Table.
             alcatelIND1IPXMIBDefRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.2
A collection of objects from Default Route Table.
             alcatelIND1IPXMIBExtMsgGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.3
A collection of objects from Extended Message Table.
             alcatelIND1IPXMIBFlushGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.4
A collection of objects to flush the RIP and SAP tables.
             alcatelIND1IPXMIBRipSapFilterGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.5
A collection of objects from the RIP and SAP Filter tables.
             alcatelIND1IPXMIBWatchdogSpoofGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.6
A collection of objects from the Watchdog spoof tables.
             alcatelIND1IPXMIBSerialFilterGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.7
A collection of objects from the Serialization Filter tables.
             alcatelIND1IPXMIBKeepaliveSpoofGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.8
A collection of objects from the Keepalive Spoof tables.
             alcatelIND1IPXMIBType20Group 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.9
A collection of objects from the Type 20 packet tables.
             alcatelIND1IPXMIBTimerGroup 1.3.6.1.4.1.6486.801.1.2.1.10.8.1.2.2.10
A collection of objects from the RIP and SAP Timer tables.