ALCATEL-IND1-IPV6-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-IPV6-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, IPV6-MIB, SNMP-FRAMEWORK-MIB, ALCATEL-IND1-VIRTUALROUTER-MIB, SNMPv2-SMI, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1IPv6MIB 1.3.6.1.4.1.6486.801.1.2.1.29.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary IPv6 MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1IPv6MIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.29.1.0
Branch For IPv6 MIB Subsystem Notifications.
         ndpMaxLimitReached 1.3.6.1.4.1.6486.801.1.2.1.29.1.0.1
This notification is generated when hardware table has reached supported Maximum entries. OS6400 will not generate new ARP request for new nexthops
         alaIPv6NeighborLimitExceeded 1.3.6.1.4.1.6486.801.1.2.1.29.1.0.2
Notification that the system-wide neighbor cache limit has been exceeded.
         alaIPv6NeighborVRFLimitExceeded 1.3.6.1.4.1.6486.801.1.2.1.29.1.0.3
Notification that a per-VRF neighbor cache limit has been exceeded.
         alaIPv6InterfaceNeighborLimitExceeded 1.3.6.1.4.1.6486.801.1.2.1.29.1.0.4
Notification that a per-interface neighbor cache limit has been exceeded.
     alcatelIND1IPv6MIBObjects 1.3.6.1.4.1.6486.801.1.2.1.29.1.1
         alaIPv6Config 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1
             alaIPv6ClearNeighbors 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.1 integer read-write
Clear all non-static entries from the Neighbor table. Enumeration: 'clear': 1.
             alaIPv6ClearTraffic 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.2 integer read-write
Reset all IPv6 traffic counters. Enumeration: 'clear': 1.
             alaIPv6ClearPMTUTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.3 integer read-write
Clear the path MTU table. Enumeration: 'clear': 1.
             alaIPv6PMTUMinLifetime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.4 unsigned32 read-write
Set the minimum lifetime for entries in the path MTU table.
             alaIPv6NeighborStaleLifetime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.5 unsigned32 read-write
Set the minimum lifetime for neighbor entries in the stale state. In older versions of this MIB the default was specified as 1440 minutes.
             alaIPv6GlobalID 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.6 octet string read-write
The global ID used in the creation of local IPv6 unicast addresses (RFC 4193). An explicit value may be specified for the global ID or this object may be set to all zero to have a global ID be created based on the algorithm from the RFC.
             alaIPv6VirtualSourceMAC 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.7 integer read-write
If set to enable(1) when a packet's source address is a VRRP virtual IPv6 address, the corresponding VRRP virtual MAC will be used as the source L2 address. If set to disable(2), the default, the interface's real MAC will be used as the source L2 address. Enumeration: 'enable': 1, 'disable': 2.
             alaIPv6NeighborLimit 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.8 unsigned32 read-write
The system-wide maximum size of the neighbor cache. A value of 0 indicates that no limit will be enforced. The minimum value is 200 entries.
             alaIPv6NeighborVRFLimit 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.1.9 unsigned32 read-write
The maximum size of the neighbor cache for a specific VRF. A value of 0 indicates that no limit is set. The minimum value is 200 entries.
         alaIPv6InterfaceTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2 no-access
Table allowing the creation and removal of IPv6 interfaces. The table is indexed by ipv6IfIndex. The value of ipv6IfIndex shall be a four byte value in one of the following formats: 0x0000vvvv - The interface for VLAN vvvv 0x0100tttt - The interface for tunnel tttt 0x02000001 - The IPv6 loopback interface The loopback interface configuration cannot be modified.
             alaIPv6InterfaceEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1 no-access
An IPv6 interface entry.
                 alaIPv6InterfaceRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.1 rowstatus read-only
Used to control the addition and removal of IPv6 interfaces.
                 alaIPv6InterfaceDescription 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.2 snmpadminstring read-only
The IPv6 interface's description.
                 alaIPv6InterfaceMtu 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.3 unsigned32 read-only
The IPv6 interface's maximum transmission unit.
                 alaIPv6InterfaceType 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.4 integer read-only
The interface type. Enumeration: 'tunnel': 3, 'other': 1, 'vlan': 2, 'loopback': 4.
                 alaIPv6InterfaceAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.5 integer read-only
Interface administrative status. Enumeration: 'enable': 1, 'disable': 2.
                 alaIPv6InterfaceSendRouterAdvertisements 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.6 integer read-only
Specify whether the router sends periodic router advertisements and responds to router solicitations on the interface. The default value for most interfaces is enable(1). Some interface types (e.g. 6to4 tunnel) cannot send router advertisements so the default (and only) value for those interfaces is disable(2). Enumeration: 'enable': 1, 'disable': 2.
                 alaIPv6InterfaceMaxRtrAdvInterval 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.7 unsigned32 read-only
The maximum time allowed between sending unsolicited multicast router advertisements from the interface.
                 alaIPv6InterfaceAdvManagedFlag 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.8 truthvalue read-only
The TRUE/FALSE value to be placed in the 'Managed address configuration' flag field in router advertisements.
                 alaIPv6InterfaceAdvOtherConfigFlag 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.9 truthvalue read-only
The TRUE/FALSE value to be placed in the 'Other stateful configuration' flag field in router advertisements.
                 alaIPv6InterfaceAdvReachableTime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.10 unsigned32 read-only
The value to be placed in the Reachable Time field in the router advertisements sent over this interface. The value zero means unspecified by this router.
                 alaIPv6InterfaceAdvRetransTimer 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.11 unsigned32 read-only
The value to be placed in the Retrans Timer field in the router advertisements sent over this interface. The value zero means unspecified by this router.
                 alaIPv6InterfaceAdvDefaultLifetime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.12 unsigned32 read-only
The value to be placed in the Router Lifetime field in the router advertisements sent over this interface. The value MUST be either zero, 1, or between alaIPv6InterfaceMaxRtrAdvInterval and 9000 seconds. The special value zero indicates that the router is not to be used as a default router. The special value 1 indicates that this object's true value should be computed using the formula 3 * alaIPv6InterfaceMaxRtrAdvInterval.
                 alaIPv6InterfaceName 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.13 snmpadminstring read-only
The mandatory user-assigned name for the interface. Since the loopback interface is created without user interaction, the name 'loopback' will be automatically assigned.
                 alaIPv6InterfaceAdvSendMtu 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.14 truthvalue read-only
The TRUE/FALSE value that determines whether the MTU option is sent in Router Advertisements.
                 alaIPv6InterfaceReachableTime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.15 unsigned32 read-only
In the absence of any reachability notification, the amount of time a neighbor reached via this interface will remain in the reachable state before transitioning to the stale state. Computed to be between .5 and 1.5 times the alaIPv6InterfaceBaseReachableTime.
                 alaIPv6InterfaceBaseReachableTime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.16 unsigned32 read-only
The base value used to compute the reachable time for neighbors reached via this interface. See alaIPv6InterfaceReachableTime above.
                 alaIPv6InterfaceMinRtrAdvInterval 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.17 unsigned32 read-only
The minimum time allowed between sending unsolicited multicast router advertisements from the interface. The time must be a minimum of 3 seconds and no more than .75 times the value of alaIPv6InterfaceMaxRtrAdvInterval. Setting this object to the special value of 0 indicates that the minimum interval should be automatically recalculated using the formula .33 times the value of alaIPv6InterfaceMaxRtrAdvInterval.
                 alaIPv6InterfaceClockSkew 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.18 unsigned32 read-only
Router Advertisement decrementing timers must be consistent in all Advertisements on the link. The clock skew accounts for link propogation delays and poorly synchronized clocks.
                 alaIPv6InterfaceRetransTimer 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.19 unsigned32 read-only
The amount of time to wait before retransmitting a Neighbor Solicitation during neighbor discovery.
                 alaIPv6InterfaceDADTransmits 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.20 unsigned32 read-only
The number of Neighbor Solicitations to send during Duplicate Address Detection. A value of 0 indicates that DAD will not be performed for addresses assigned to the interface.
                 alaIPv6InterfaceAdvHopLimit 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.21 unsigned32 read-only
The value placed in the current hop limit field of router advertisements.
                 alaIPv6InterfaceLPND 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.22 integer read-only
Enable/disable local proxy neighbor discovery. Enumeration: 'enable': 1, 'disable': 2.
                 alaIPv6InterfaceRAFilter 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.23 integer read-only
Enable/disable RA filtering. Enumeration: 'enable': 1, 'disable': 2.
                 alaIPv6InterfaceNeighborLimit 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.24 unsigned32 read-only
The maximum number o neighbor entries that may be cached on this interface. A value of 0 indicates that no limit is set. The minimum value is 10.
                 alaIPv6InterfaceRetransBackoff 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.25 unsigned32 read-only
The neighbor unreachability detection exponential backoff base. A value of 1 indicates the use of fixed interval retransmissions.
                 alaIPv6InterfaceRetransMax 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.2.1.26 unsigned32 read-only
The maximum number of neighbor solicitations to be sent during neighbor discovery or neighbor unreachability detection.
         alaIPv6TunnelConfig 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.3
             alaIPv6ConfigTunnelTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.3.2 no-access
Table for IPv6 configured tunnels. This table contains the tunnel-specific information extending the corresponding tunnel interface entry in alaIPv6InterfaceTable.
                 alaIPv6ConfigTunnelEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.3.2.1 no-access
A entry contains the objects for an IPv6 configured tunnel.
                     alaIPv6ConfigTunnelV4Source 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.3.2.1.1 ipaddress read-only
The source IPv4 address for the tunnel.
                     alaIPv6ConfigTunnelV4Dest 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.3.2.1.2 ipaddress read-only
The destination IPv4 address for the tunnel.
         alaIPv6InterfaceAddressTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4 no-access
Table allowing the creation and removal of IPv6 addresses assigned to interfaces.
             alaIPv6InterfaceAddressEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4.1 no-access
An IPv6 interface address entry. The same link-local address may be assigned to multiple interfaces. A global address may only be assigned to a single interface.
                 alaIPv6InterfaceAddressRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4.1.1 rowstatus read-only
Used to control the addition and removal of IPv6 interface addresses.
                 alaIPv6InterfaceAddress 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4.1.2 ipv6address no-access
An IPv6 address (or prefix for EUI-64 addresses) assigned to the interface.
                 alaIPv6InterfaceAddressPrefixLength 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4.1.3 unsigned32 read-only
The number of bits that are significant in the IPv6 address' prefix.
                 alaIPv6InterfaceAddressAnycastFlag 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4.1.4 truthvalue read-only
This object has the value 'true(1)', if this address is an anycast address and the value 'false(2)' otherwise.
                 alaIPv6InterfaceAddressDADStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.4.1.5 integer read-only
The status of duplicate address detection for this address. The only value that may be set via SNMP is 'check' when the current status is 'duplicate'. In such cases, duplicate address detection will be performed again for the address. Enumeration: 'unknown': 0, 'duplicate': 2, 'passed': 3, 'pending': 1, 'check': 4.
         alaIPv6InterfaceEUI64AddressTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.5 no-access
Table allowing the creation and removal of IPv6 addresses formed by appending an EUI-64 interface identifier to the specified prefix. This table is mainly used for the creation of such addresses. After creation they can be managed via the alaIPv6InterfaceAddressTable.
             alaIPv6InterfaceEUI64AddressEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.5.1 no-access
An IPv6 interface EUI-64 address entry.
                 alaIPv6InterfaceEUI64AddressRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.5.1.1 rowstatus read-only
Used to control the addition and removal of IPv6 interface EUI-64 addresses.
                 alaIPv6InterfaceEUI64AddressPrefix 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.5.1.2 alaipv6addressprefix no-access
The prefix for the EUI-64 address.
                 alaIPv6InterfaceEUI64AddressPrefixLength 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.5.1.3 unsigned32 read-only
The number of bits that are significant in the IPv6 address' prefix.
                 alaIPv6InterfaceEUI64AddressIdentifier 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.5.1.4 octet string read-only
The interface's EUI-64 identifier which is combined with the prefix to form the IPv6 address.
         alaIPv6NeighborTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6 no-access
The IPv6 neighbor table. Much of this information is available in the RFC-2465 ipv6NetToMediaTable. However, that table does not allow the static configuration of neighbor entries (all objects except for ipv6NetToMediaValid are read-only).
             alaIPv6NeighborEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1 no-access
Each entry contains one IPv6 address to `physical' address equivalence (a neighbor).
                 alaIPv6NeighborNetAddress 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.1 ipv6address no-access
The neighbor's IPv6 Address.
                 alaIPv6NeighborPhysAddress 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.2 physaddress read-only
The neighbor's media-dependent `physical' address.
                 alaIPv6NeighborSlot 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.3 unsigned32 read-only
The slot used to reach the neighbor. When creating a static neighbor the slot must be specified. On read, a value of zero indicates the slot is not known/not applicable.
                 alaIPv6NeighborPort 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.4 unsigned32 read-only
The port used to reach the neighbor. When creating a static neighbor the port must be specified. On read, a value of zero indicates the port is not known/not applicable.
                 alaIPv6NeighborType 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.5 integer read-only
The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address. All entries added via this table will have the type static(3) and only static entries may be removed via this table. Enumeration: 'static': 3, 'other': 1, 'dynamic': 2, 'local': 4.
                 alaIPv6NeighborState 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.6 integer read-only
The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used. Enumeration: 'unknown': 6, 'probe': 4, 'invalid': 5, 'delay': 3, 'reachable': 1, 'stale': 2.
                 alaIPv6NeighborLastUpdated 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.7 timestamp read-only
The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
                 alaIPv6NeighborRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.8 rowstatus read-only
Used to control the addition and removal of static entries in the neighbor table.
                 alaIPv6NeighborLifetime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.9 unsigned32 read-only
The remaining time the neighbor will stay in its current state. External events may cause a state change before the expiry of this lifetime. A value of zero indicates the neighbor will remain in its current state indefinitely.
                 alaIPv6NeighborReachability 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.10 integer read-only
The reachability status of the neighbor. Enumeration: 'confirmed': 1, 'incomplete': 3, 'unconfirmed': 2.
                 alaIPv6NeighborChassis 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.6.1.11 unsigned32 read-only
On a multi-chasis system, the chassis used to reach the neighbor. On a single-chassis system this value is always 0. On read, a value of zero may indicate that the chassis is not known/not applicable.
         alaIPv6StaticRouteTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7 no-access
This table has been superseded by alaIprmV6StaticRouteTable in ALCATEL-IND1-IPRMV6-MIB. Table allowing the creation and removal of static IPv6 routes.
             alaIPv6StaticRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1 no-access
A static route entry.
                 alaIPv6StaticRouteDest 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1.1 ipv6address no-access
The destination IPv6 address of this static route. This object may not take a Multicast address value.
                 alaIPv6StaticRoutePfxLength 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1.2 integer32 no-access
Indicates the prefix length of the destination address.
                 alaIPv6StaticRouteIfIndex 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1.3 ipv6ifindexorzero read-only
If the next hop address is a link-local address, this is the ipv6IfIndex value of the interface over which the destination is reached. For all other next hop address types the value is zero.
                 alaIPv6StaticRouteNextHop 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1.4 ipv6address read-only
The IPv6 address of the next hop towards the destination.
                 alaIPv6StaticRouteMetric 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1.5 unsigned32 read-only
The routing metric for this route. The lower the value, the higher the priority for the static route.
                 alaIPv6StaticRouteRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.7.1.6 rowstatus read-only
Used to control the addition and removal of static routes.
         alaIPv6HostTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.8 no-access
Local table mapping host names to IPv6 addresses. This provides the equivalent of /etc/hosts for IPv6.
             alaIPv6HostEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.8.1 no-access
A entry maps a host name to an IPv6 address.
                 alaIPv6HostName 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.8.1.1 snmpadminstring no-access
A host name to be mapped to an IPv6 address.
                 alaIPv6HostAddress 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.8.1.2 ipv6address no-access
The IPv6 address mapped to the host name.
                 alaIPv6HostRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.8.1.3 rowstatus read-only
Allows host name/IPv6 address mappings to be created and deleted in this table.
         alaIPv6InterfacePrefixTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9 no-access
Table allowing the creation and removal of IPv6 prefixes to be placed in Prefix Information options in Router Advertisement messages sent from the interface. Default: all prefixes that the router advertises via routing protocols as being on-link for the interface from which the advertisement is sent. The link-local prefix is not included in the list of advertised prefixes.
             alaIPv6InterfacePrefixEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1 no-access
An IPv6 interface prefix entry.
                 alaIPv6InterfacePrefixRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.1 rowstatus read-only
Used to control the addition and removal of IPv6 interface prefixes for Router ADvertisement messages.
                 alaIPv6InterfacePrefix 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.2 ipv6address no-access
The prefix associated with this interface.
                 alaIPv6InterfacePrefixLength 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.3 unsigned32 no-access
The length of the prefix in bits.
                 alaIPv6InterfacePrefixValidLifetime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.4 unsigned32 read-only
The value to be placed in the Valid Lifetime in the Prefix Information option, in seconds. The designated value of 4,294,967,295 represents infinity.
                 alaIPv6InterfacePrefixOnLinkFlag 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.5 truthvalue read-only
The value to be placed in the on-link flag (L-bit) field in the Prefix Information option.
                 alaIPv6InterfacePrefixPreferredLifetime 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.6 unsigned32 read-only
The value to be placed in the Preferred Lifetime in the Prefix Information option, in seconds. The designated value of 4,294,967,295 represents infinity.
                 alaIPv6InterfacePrefixAutonomousFlag 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.7 truthvalue read-only
The value to be placed in the Autonomous Flag field in the Prefix Information option.
                 alaIPv6InterfacePrefixSource 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.8 integer read-only
The source of this prefix. If configured by management the value will be configured(3). If determined automatically from IPv6 interface address configuration the value will be dynamic(2). Enumeration: 'configured': 3, 'other': 1, 'dynamic': 2.
                 alaIPv6InterfacePrefixValidLifetimeDecrement 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.9 truthvalue read-only
If true, use the remaining seconds derived from alaIPv6InterfacePrefixValidLifetime in the Router Advertisement. If false, use the static value alaIPv6InterfacePrefixValidLifetime.
                 alaIPv6InterfacePrefixValidLifetimeExpire 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.10 dateandtime read-only
The date and time when the advertised prefix Valid Lifetime expires. To use this value, alaIPv6InterfaceValidLifetimeDecrement must be set to true.
                 alaIPv6InterfacePrefixPreferredLifetimeDecrement 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.11 truthvalue read-only
If true, use the remaining seconds derived from alaIPv6InterfacePrefixPreferredLifetime in the Router Advertisement. If false, use the static value alaIPv6InterfacePrefixPreferredLifetime.
                 alaIPv6InterfacePrefixPreferredLifetimeExpire 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.9.1.12 dateandtime read-only
The date and time when the advertised prefix Preferred Lifetime expires. To use this value, alaIPv6InterfacePreferredLifetimeDecrement must be set to true.
         alaIPv6PMTUTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10 no-access
Table allowing the retrieval of the known IPv6 path MTU value.
               alaIPv6PMTUEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10.1 no-access
An IPv6 path MTU entry.
                   alaIPv6PMTUDest 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10.1.1 ipv6address no-access
The destination address of the IPv6 path.
                   alaIPv6PMTU 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10.1.2 unsigned32 read-only
The path's MTU.
                   alaIPv6PMTUExpire 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10.1.3 unsigned32 read-only
The minimum time remaining before the PMTU entry is removed from the table.
                   alaIPv6PMTUHits 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10.1.4 counter32 read-only
The number of times the path MTU entry has been used.
                   alaIPv6PMTUUpdates 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.10.1.5 counter32 read-only
The number of times the path MTU entry has been updated.
         alaIPv6RouteFlagsTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11 no-access
Table allowing the retrieval of the flags for IPv6 route entries.
               alaIPv6RouteFlagsEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1 no-access
An IPV6 route flags entry.
                   alaIPv6RouteFlagsUp 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.1 truthvalue read-only
True if the Up (U) flag is set on the route.
                   alaIPv6RouteFlagsGateway 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.2 truthvalue read-only
True if the Gateway (G) flag is set on the route.
                   alaIPv6RouteFlagsHost 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.3 truthvalue read-only
True if the Host (H) flag is set on the route.
                   alaIPv6RouteFlagsStatic 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.4 truthvalue read-only
True if the Static (S) flag is set on the route.
                   alaIPv6RouteFlagsCloneable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.5 truthvalue read-only
True if the Cloneable (C) flag is set on the route.
                   alaIPv6RouteFlagsDiscard 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.6 truthvalue read-only
True if the Discard/Blackhole (B) flag is set on the route.
                   alaIPv6RouteFlagsECMP 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.7 truthvalue read-only
True if the ECMP (E) flag is set on the route.
                   alaIPv6RouteFlagsTransient 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.11.1.8 truthvalue read-only
True if route has not been replaced by valid route after takeover.
         alaIPv6LocalUnicastTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13 no-access
Table allowing the creation and removal of local IPv6 unicast addresses (RFC 4193) on an interface.
               alaIPv6LocalUnicastEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1 no-access
An local unicast IPv6 address entry.
                   alaIPv6LocalUnicastGlobalID 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1.1 octet string no-access
The global ID portion of the local IPv6 unicast address. Leave the value as all zero when adding a new addres to use the alaIPv6GlobalID value.
                   alaIPv6LocalUnicastSubnetID 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1.2 octet string no-access
The subnet ID portion of the local IPv6 unicast address.
                   alaIPv6LocalUnicastInterfaceID 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1.3 octet string no-access
The interface identifier portion of the local IPv6 unicast address. When alaIPv6LocalUnicastEUI64 is true(1) the value of this object should be all zero.
                   alaIPv6LocalUnicastPrefixLength 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1.4 unsigned32 read-only
The number of bits that are significant in the IPv6 address prefix.
                   alaIPv6LocalUnicastEUI64 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1.5 truthvalue read-only
If true(1) the interface identifier is formed from an automatically generated EUI-64 value.
                   alaIPv6LocalUnicastRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.13.1.6 rowstatus read-only
Used to control the addition and removal of local IPv6 unicast addresses.
         alaIPv6RAFilterTrustedTable 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.14 no-access
Table allowing the creation and removal of trusted ports for an interface's RA filtering.
               alaIPv6RAFilterTrustedEntry 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.14.1 no-access
An RA filter trusted port entry.
                   alaIPv6RAFilterTrustedChassis 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.14.1.1 unsigned32 no-access
On a multi-chasis system, the chassis on which the trusted port resides. On a single-chassis system or when specifying a link aggregation this value is always 0.
                   alaIPv6RAFilterTrustedSlot 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.14.1.2 unsigned32 no-access
The slot on which the trusted port resides. When specifying a link aggregation this value is always 0.
                   alaIPv6RAFilterTrustedPort 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.14.1.3 unsigned32 no-access
The trusted port's physical port number or the id of a link aggregation.
                   alaIPv6RAFilterTrustedRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.1.1.14.1.4 rowstatus read-only
Used to control the addition and removal of an RA filter's trusted ports.
     alcatelIND1IPv6MIBConformance 1.3.6.1.4.1.6486.801.1.2.1.29.1.2
         alcatelIND1IPv6MIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.1
             alaIPv6Compliance 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.1.1
The compliance statement for switches with Alcatel IPv6 stack and implementing ALCATEL-IND1-IPV6-MIB.
         alcatelIND1IPv6MIBGroups 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2
             alaIPv6TunnelConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.1
A collection of objects to support management of Alcatel IPv6 tunneling.
             alaIPv6ConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.2
A collection of objects to support management of configuration parameters of Alcatel IPv6 stack.
             alaIPv6NeighborGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.3
A collection of objects to support management of IPv6 neighbors.
             alaIPv6StaticRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.4
A collection of objects to support management of IPv6 static routes.
             alaIPv6InterfaceGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.5
A collection of objects to support management of IPv6 interfaces.
             alaIPv6InterfaceAddressGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.6
A collection of objects to support management of IPv6 addresses assigned to interfaces.
             alaIPv6InterfaceEUI64AddressGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.7
A collection of objects to support management of IPv6 EUI-64 addresses assigned to interfaces.
             alaIPv6InterfacePrefixGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.8
A collection of objects to support management of IPv6 prefixes assigned to interfaces.
             alaIPv6PMTUGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.9
A collection of objects to support management of IPv6 path MTUs.
             alaIPv6RouteFlagsGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.10
A collection of objects to support management of IPv6 route flags.
             alaIPv6LocalUnicastGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.11
A collection of objects to support management of local IPv6 unicast addresses (RFC 4193).
             alaIPv6HostGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.12
A collection of objects to support management of IPv6 addresses assigned to Host.
             alcatelIND1IPv6NotificationGroup 1.3.6.1.4.1.6486.801.1.2.1.29.1.2.2.13
The AlcatelIND1IPv6 MIB Notification Group.