ALCATEL-IND1-IPRM-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-IPRM-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, IANA-RTPROTO-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1IPRMMIB 1.3.6.1.4.1.6486.801.1.2.1.10.2.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IPRM global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2010 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1IPRMMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1
         alaIprmConfig 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1
             alaIprmRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1 no-access
IPRM's Routing table.
                 alaIprmRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1 no-access
A particular route to a particular destination
                     alaIprmRouteDest 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.1 ipaddress no-access
The destination IP address of this route.
                     alaIprmRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.2 ipaddress no-access
The mask of this route
                     alaIprmRouteTos 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.3 integer32 no-access
The TOS for this route
                     alaIprmRouteNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.4 ipaddress no-access
The Gateway for this route
                     alaIprmRouteProto 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.5 ianaiprouteprotocol read-only
The protocol that this route was learned from
                     alaIprmRouteMetric 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.6 integer32 read-only
The metric for this route
                     alaIprmRoutePriority 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.7 integer32 read-only
The priority for this route
             alaIprmStaticRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2 no-access
IPRM's Static Route table.
                 alaIprmStaticRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1 no-access
A route entered by the user
                     alaIprmStaticRouteDest 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.1 ipaddress no-access
The destination IP address of this route.
                     alaIprmStaticRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.2 ipaddress no-access
The mask of this route
                     alaIprmStaticRouteNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.3 ipaddress no-access
The Gateway for this route
                     alaIprmStaticRouteMetric 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.4 integer32 read-only
The metric for this route
                     alaIprmStaticRouteStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.5 rowstatus read-only
The status of this entry. Enabling causes a new static route to be created, disabled causes that static route to be deleted.
                     alaIprmStaticRouteBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.6 alaiprmadminstatus read-only
For enabling or disabling the BFD status on this static route.
                     alaIprmStaticRouteType 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.7 alaiprmstaticroutetypes read-only
Type of static route.
                     alaIprmStaticRouteTag 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.8 unsigned32 read-only
Tag associated with static route.
                     alaIprmStaticRouteName 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.9 snmpadminstring read-only
A comment associated with the static route.
             alaIprmStaticAllBfd 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.3 alaiprmadminstatus read-write
For attempting to enable/disable the BFD state on all static routes.
             alaIprmPrimaryAddress 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.4 ipaddress read-write
Defines the Primary IP Address of this Router.
             alaIprmRouterId 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.5 ipaddress read-write
Defines the Router-id for this Router.
             alaIprmRouteDistinguisher 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.6 snmpadminstring read-write
Associates a route distinguisher to a VRF. Syntax for a route distinguisher and route target as defined in [RFC4364].
             alaIprmRouteTargetTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7 no-access
This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN.
                 alaIprmRouteTargetEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1 no-access
An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. See [RFC4364] for a complete definition of a route target.
                     alaIprmRouteTarget 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.1 snmpadminstring no-access
A Virtual Router Route Target. Syntax for a route distinguisher and route target as defined in [RFC4364].
                     alaIprmRouteTargetType 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.2 alamplsl3vpnroutetype read-only
The route target distribution type.
                     alaIprmRouteTargetRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.3 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
             alaIprmRtPrefTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8 no-access
This table specifies the route preference values for various types of routes.
                 alaIprmRtPrefTableEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1 no-access
An entry is in this table for each route preference type.
                     alaIprmRtPrefEntryType 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1.1 alaiprmrtpreftype no-access
The type of route (associated with a route preference value)
                     alaIprmRtPrefEntryValue 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1.2 integer32 read-write
The route preference value used for this type of route.
             alaIprmExportRouteMap 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.9 integer32 read-write
A route-map index representing the route-map used to filter routes exported to the Global Route Table. A value of -1 indicates no routes should be exported. A value of 0 indicates all routes should be exported. Otherwise, the value is the route-map index to use for filtering.
             alaIprmImportVrfTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10 no-access
This table specifies VRFs to import routes from.
                   alaIprmImportVrfEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1 no-access
An entry in this table is created for each VRF to import routes from.
                       alaIprmImportVrfName 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.1 snmpadminstring no-access
The name of the VRF that routes should be imported from. An empty string indicates the default VRF.
                       alaIprmImportVrfRouteMap 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.2 integer32 read-only
A route-map index representing the route-map used to filter imported routes.
                       alaIprmImportVrfRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.3 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
             alaIprmImportIsidTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11 no-access
This table specifies ISIS L3VPN ISIDs to import routes from.
                   alaIprmImportIsidEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1 no-access
An entry in this table is created for each ISID to import routes from.
                       alaIprmImportIsid 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.1 unsigned32 no-access
The ISIS SPB L3VPN ISID that routes should be imported from.
                       alaIprmImportIsidRouteMap 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.2 integer32 read-only
A route-map index representing the route-map used to filter imported routes.
                       alaIprmImportIsidRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.3 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
             alaIprmExportToAllVrfsRouteMap 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.12 integer32 read-write
Used to export routes to all other VRFs that don't already have an entry in the Import Vrf Table. The object is a route-map index representing the route-map used to filter the exported routes. A value of -1 indicates no routes should be exported. A value of 0 indicates all routes should be exported. Otherwise, the value is the route-map index to use for filtering.
     alcatelIND1IPRMMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2
         alcatelIND1IPRMMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.1
             alaIprmCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.1.1
The compliance statement for routers running IPRM and implementing the ALCATEL-IND1-IPRM MIB.
         alcatelIND1IPRMMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.2
             alaIprmConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.2.1
A collection of objects to support management of global configuration parameters of the IPRM Module.