ALCATEL-IND1-DA-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-DA-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, ALCATEL-IND1-TIMETRA-TC-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1DaMIB 1.3.6.1.4.1.6486.801.1.2.1.63.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alaIND1DaMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.63.1.0
Branch For DA Subsystem Notifications.
         unpMcLagMacIgnored 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.1
This trap is generated if a MAC/User is dropped due to vlan not existing or UNP is not enabled on the MCLAG
         unpMcLagConfigInconsistency 1.3.6.1.4.1.6486.801.1.2.1.63.1.0.2
This trap is generated when configuration becomes Out_of_Sync.
     alaIND1DaMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.63.1.1
Branch For DA Subsystem Managed Objects.
         alaDaUserNetProfileTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1 no-access
This table stores the UNP profiles created in the system. The entries would be mapped to vlan ID which would be used by device authentication for classifying users.
             alaDaUserNetProfileEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1 no-access
User Network Profile entry
                 alaDaUserNetProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.1 snmpadminstring no-access
The name of this profile.
                 alaDaUserNetProfileVlanID 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.2 integer32 read-only
The VLAN id for this profile.
                 alaDaUserNetProfileRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.3 rowstatus read-only
The status of this table entry.
                 alaDaUserNetProfileQosPolicyListName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.4 snmpadminstring read-only
The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device along with alaDaUserNetProfileVlanID.
                 alaDaUserNetProfileMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.5 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
                 alaDaUserNetProfileSaaProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.6 snmpadminstring read-only
The name of the SAA profile that is associated to this profile.
         alaDaUNPIpNetRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2 no-access
A list of IP network address rules. This is used to match the InetAddress of a packet to a User Network Profile entry.
             alaDaUNPIpNetRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1 no-access
An IP network address rule entry.
                 alaDaUNPIpNetRuleAddrType 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.1 inetaddresstype no-access
The IP network address type used for VLAN classification. For now Only IPv4 is supported.
                 alaDaUNPIpNetRuleAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.2 inetaddress no-access
The IP network address used for VLAN classification. Only IPv4 is supported.
                 alaDaUNPIpNetRuleMask 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.3 inetaddress no-access
The IP network mask applying to the IP network address.
                 alaDaUNPIpNetRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.4 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                 alaDaUNPIpNetRuleVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.5 integer32 read-only
The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated.
                 alaDaUNPIpNetRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.6 rowstatus read-only
Row Status for creating/deleting rules.
                 alaDaUNPIpNetRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.7 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
         alaDaUNPMacRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3 no-access
A list of MAC address rules. This is used to match the MAC Address of a packet to a User Network Profile entry
             alaDaUNPMacRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1 no-access
A MAC rule entry.
                 alaDaUNPMacRuleAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.1 macaddress no-access
The MAC address used for VLAN classification.
                 alaDaUNPMacRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.2 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                 alaDaUNPMacRuleVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.3 integer32 read-only
The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated.
                 alaDaUNPMacRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.4 rowstatus read-only
Row Status for creating/deleting rules.
                 alaDaUNPMacRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.5 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
         alaDaUNPMacRangeRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4 no-access
A list of MAC range rules. This is used to match the MAC Address Range of a packet to a User Network Profile entry.
             alaDaUNPMacRangeRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1 no-access
A MAC range rule entry.
                 alaDaUNPMacRangeRuleLoAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.1 macaddress no-access
The lower bound of MAC address range used for VLAN classification.
                 alaDaUNPMacRangeRuleHiAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.2 macaddress read-only
The upper bound of MAC address range used for VLAN classification.
                 alaDaUNPMacRangeRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.3 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                 alaDaUNPMacRangeRuleVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.4 integer32 read-only
The vlan tag to be used for classification of tagged pkts. The range states the valid vlan range in the system. Vlan tag of 0 indicates no VLAN is associated.
                 alaDaUNPMacRangeRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.5 rowstatus read-only
Row Status for creating/deleting rules.
                 alaDaUNPMacRangeRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.6 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
         alaDaUNPVlanTagRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5 no-access
A list of Vlan Tag based classification rules. This is used to match the vlan tag in a packet to a User Network Profile entry
             alaDaUNPVlanTagRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1 no-access
A Vlan Tag rule entry.
                 alaDaUNPVlanTagRuleVlan 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.1 integer32 no-access
The Vlan Tag used for VLAN classification. The range states the valid Vlan range in the system.
                 alaDaUNPVlanTagRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.2 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                 alaDaUNPVlanTagRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.3 rowstatus read-only
Row Status for creating/deleting rules.
                 alaDaUNPVlanTagRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.4 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
         alaDaMacUserTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6 no-access
A table of MAC address learned on an UNP port.
             alaDaMacUserEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1 no-access
Non 802.1x supplicant information.
                 alaDaMacUserIntfNum 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.1 interfaceindex no-access
The ifIndex representing the slot and port where the non 802.1x supplicant is learned.
                 alaDaMacUserMACAddress 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.2 macaddress no-access
The MAC address of the non 802.1x supplicant.
                 alaDaMacUserVlanID 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.3 integer32 read-only
The Id of the VLAN on which the non 802.1x supplicant is learned.
                 alaDaAuthenticationStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.4 integer read-only
Authentication status of the non 802.1x supplicant. Enumeration: 'failedNoServer': 6, 'authenticated': 3, 'failedTimeout': 5, 'failedNoResources': 7, 'failed': 4, 'idle': 1, 'inProgress': 2.
                 alaDaMacUserIpAddress 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.5 ipaddress read-only
The ip address from which the mac user is sending the packets
                 alaDaMacUserUnpUsed 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.6 snmpadminstring read-only
The UNP used for classifying the mac user
                 alaDaMacUserLoginTimeStamp 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.7 dateandtime read-only
The Login time stamp of the mac user
                 alaDaMacUserAuthtype 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.8 integer read-only
The authentication type of the mac user Enumeration: 'macAuthentication': 0, 'others': 1.
                 alaDaMacUserClassificationSource 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.9 aladaclassificationpolicytype read-only
Classification policy under which the non 802.1x supplicant is learned.
         alaDaUNPPortTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7 no-access
A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
             alaDaUNPPortEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1 no-access
Each of these entries represents a user port on which UNP is enabled and their configuration.
                 alaDaUNPPortIfIndex 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.1 interfaceindexorzero no-access
The interface index of the UNP enabled port.
                 alaDaUNPPortDefaultProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.2 snmpadminstring read-only
The default UNP name.
                 alaDaUNPPortPassAltProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.3 snmpadminstring read-only
The Pass alternate UNP name.
                 alaDaUNPPortRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.4 rowstatus read-only
The status of this table entry.
                 alaDaUNPPortMacAuthFlag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.5 integer read-only
The flag to indicate if MAC AUTH is enabled on port. Enumeration: 'enable': 1, 'disable': 2.
                 alaDaUNPPortClassificationFlag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.6 integer read-only
The flag to indicate if Classification is enabled on port. Enumeration: 'enable': 1, 'disable': 2.
                 alaDaUNPPortTrustTagStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.7 integer read-only
The flag to indicate whether the vlan tag in the incoming packet could be used for classifying the user when mac authentication fails and classification rules dont match. Enumeration: 'enable': 1, 'disable': 2.
                 alaDaUNPPortMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.8 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
                 alaDaUNPPortCustomerDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.9 unsigned32 read-only
The Customer Domain that this port belongs to. Default is on domain 0.
                 alaDaUNPPortType 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.10 integer read-only
The object defines the port as UNP enable bridge port (1), spb-access-port (2). Enumeration: 'bridgePort': 1, 'spbAccessPort': 2.
                 alaDaUNPPortPassAltSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.11 snmpadminstring read-only
The Pass alternate Spb Profile name. This is to be used on a successful authentication and there is no SPB profile passed back from the Authentication Server.
                 alaDaUNPPortDefaultSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.12 snmpadminstring read-only
The default Spb Profile name.
         alaDaUNPGlobalConfiguration 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8
             alaDaUNPDynamicVlanConfigFlag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.1 integer read-write
Indicated whether dynamic vlan configuration is enabled or not. Enumeration: 'enable': 1, 'disable': 2.
             alaDaUNPAuthServerDownUnp 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.2 snmpadminstring read-write
The UNP to be used for classification if the authentication server is not reachable.
             alaDaUNPAuthServerDownTimeout 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.3 integer32 read-write
The timeout, in seconds, after which all the users learned in the auth-server-down UNP will be sent for re-authentication.
             alaDaUNPDynamicVlanMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.4 alamultichassisconfigstatus read-only
Indicated whether dynamic vlan configuration is sync across both MCLAG chassis or not. All rows will be created as local. Actual status will be set through remote chassis synchronization.
             alaDaUNPAuthServerDownUNPMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.5 alamultichassisconfigstatus read-only
Indicated whether Auth server down UNP config is sync across both MCLAG chassis or not. All rows will be created as local. Actual status will be set through remote chassis synchronization.
             alaDaUNPAuthServerDownTimeoutMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.6 alamultichassisconfigstatus read-only
Indicated whether Auth server down timeout config is sync across both MCLAG chassis or not. All rows will be created as local. Actual status will be set through remote chassis synchronization.
             alaDaUNPDynamicProfileConfigFlag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.7 integer read-write
Indicated whether dynamic profile configuration is enabled or not. Enumeration: 'enable': 1, 'disable': 2.
             alaDaUNPDynamicProfileConfigMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.8 alamultichassisconfigstatus read-only
Indicated whether dynamic profile creation is sync across both MCLAG chassis or not.
             alaDaUNPReloadVsiTypeDB 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.8.9 integer read-write
The object triggers the system to reload the VSI Type DB from flash. Once the operation is done it is reset to zero (0). Enumeration: 'default': 0, 'true': 1.
         alaDaMacVlanUserTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9 no-access
A table of non 802.1x supplicants learned on 802.1x authenticated ports.
             alaDaMacVlanUserEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1 no-access
Non 802.1x supplicant information.
                 alaDaMacVlanUserIntfNum 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.1 interfaceindex no-access
The ifIndex representing the slot and port where the non 802.1x supplicant is learned.
                 alaDaMacVlanUserMACAddress 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.2 macaddress no-access
The MAC address of the non 802.1x supplicant.
                 alaDaMacVlanUserVlanID 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.3 integer32 no-access
The Id of the VLAN on which the non 802.1x supplicant is learned.
                 alaDaMacVlanUserAuthStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.4 integer read-only
Authentication status of the non 802.1x supplicant. Enumeration: 'failedNoServer': 6, 'authenticated': 3, 'failedTimeout': 5, 'failedNoResources': 7, 'failed': 4, 'idle': 1, 'inProgress': 2.
                 alaDaMacVlanUserIpAddressType 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.5 inetaddresstype read-only
The type of the IP address of the user. For now only IPv4 is supported.
                 alaDaMacVlanUserIpAddress 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.6 inetaddress read-only
The ip address from which the mac user is sending the packets
                 alaDaMacVlanUserUnpUsed 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.7 snmpadminstring read-only
The UNP used for classifying the mac user
                 alaDaMacVlanUserLoginTimeStamp 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.8 dateandtime read-only
The Login time stamp of the mac user
                 alaDaMacVlanUserAuthtype 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.9 integer read-only
The authentication type of the mac user Enumeration: 'macAuthentication': 0, 'others': 1.
                 alaDaMacVlanUserClassificationSource 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.10 aladaclassificationpolicytype read-only
Classification policy under which the non 802.1x supplicant is learned.
                 alaDaMacVlanUserMCLagLearningLoc 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.11 integer read-only
Source of Learning. Informs whether the Mac was learnt locally or through remote. Enumeration: 'remote': 2, 'local': 1.
         alaDaUNPNotificationObjects 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10
               alaDaUnpMacAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.1 macaddress no-access
The mac which failed to get configured on peer chassis.
               alaDaUnpSourceIpAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.2 ipaddress no-access
The ip-address of mac which failed to get configured on peer chassis.
               alaDaUnpNativeVlan 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.3 integer32 no-access
The native vlan of MCLAG on which the mac ingressed.
               alaDaUnpVlan 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.4 integer32 no-access
The vlan on which mac was classified on local chassis
               alaDaUnpMCLAGId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.5 integer32 no-access
The lag id for MCLAG
               alaDaUnpCommandType 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.6 integer no-access
Indicates which configuration command is out-of-sync Enumeration: 'authServerTimerConfigCmd': 7, 'vlanTagRuleConfigCmd': 5, 'ipRuleConfigCmd': 4, 'unpConfigCmd': 1, 'authServerUnpConfigCmd': 6, 'macRangeRuleConfigCmd': 3, 'dynamicVlanConfigCmd': 8, 'dynamicProfileConfigCmd': 10, 'lagConfigCmd': 9, 'macRuleConfigCmd': 2.
               alaDaUnpName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.7 snmpadminstring no-access
Indicates which unp profile is out-of-sync. If there is no UNP Profile associated then zero length string is sent
               alaDaUnpMacAddr1 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.8 macaddress no-access
The mac for mac rule or the lower limit of mac-range rule.
               alaDaUnpMacAddr2 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.9 macaddress no-access
The upper limit of mac-range rule.
               alaDaUnpIpAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.10 ipaddress no-access
The ip-address in ip-rule
               alaDaUnpIpMask 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.11 inetaddress no-access
The ip-address in ip-rule
               alaDaUnpVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.10.12 integer32 no-access
The vlan vlan-tag rule. Zero value means it is not applicable
         alaDaUnpCustomerDomainTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11 no-access
This table creates and deletes the UNP group within a switch.
               alaDaUnpCustomerDomainEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1 no-access
UNP Group: entry
                   alaDaUnpCustomerDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.1 unsigned32 no-access
The Customer Domain ID. Domain ID zero (0) is the default and is always present in the switch.
                   alaDaUnpCustomerDomainDesc 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.2 snmpadminstring read-only
A field to provide meaningful description of the Customer Domain for easy identification of the domain.
                   alaDaUnpCustomerDomainRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.3 rowstatus read-only
The status of this table entry.
         alaDaSpbProfileTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12 no-access
This table stores the Service Classification profiles created in the system. The entries provides information to classify device in the Service domain.
               alaDaSpbProfileEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1 no-access
Service Classification Profile entry
                   alaDaSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.1 snmpadminstring no-access
The name of this profile.
                   alaDaSpbProfileEncapVal 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.2 tmnxencapval read-only
The encapsulation to be used for the SAP connecting to the service.
                   alaDaSpbProfileQosPolicyListName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.3 snmpadminstring read-only
The name of the QoS Policy List name that will be used if this User Network Profile is applied for a given device along with alaDaSpbProfileVlanID.
                   alaDaSpbProfileIsid 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.4 unsigned32 read-only
The object represnet the I-SID that is to be dynamically created when alaDaSpbProfileServiceID does not exist in the system and must be used along with alaDaSpbProfileBVlan.
                   alaDaSpbProfileBVlan 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.5 unsigned32 read-only
The Backbone VLAN ID (BVLAN) used for the I-SID specified in alaDaSpbProfileIsid. This object must be specified along with alaDaSpbProfileIsid.
                   alaDaSpbProfileRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.6 rowstatus read-only
The row status of this table entry.
                   alaDaSpbProfileMulticastMode 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.7 integer read-only
To configure the multicast replication mode for each service: Head-end(1) where a non-unicast packet entering the SAP port is replicated once for each receiver in the b-domain using its unicast BMAC. Tandem(2) where a non-unicast packet entering the SAP port is replicated once at each node using the multicast group address. Enumeration: 'headend': 1, 'tandem': 2.
                   alaDaSpbProfileSapVlanXlation 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.8 integer read-only
To enable/disable the vlan translation for all the SAPs configured in this service if the corresponding access ports for the SAPs also has the vlan translation enabled. Enumeration: 'enable': 1, 'disable': 2.
         alaDaUNPCustDomainEvbGpIdRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13 no-access
A list of EVB group ID based classification rules. This is used to match the EVB Group ID passed from EVB to a User Network Profile entry
               alaDaUNPCustDomainEvbGpIdRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1 no-access
A EVB Group ID rule entry.
                   alaDaUNPCustDomainEvbGpIdRuleCustomerDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.1 unsigned32 no-access
The UNP Customer Domain ID that will be used for profile lookup.
                   alaDaUNPCustDomainEvbGpIdRuleGroupId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.2 unsigned32 no-access
The EVB Group ID used for profile lookup.
                   alaDaUNPCustDomainEvbGpIdRuleVlanProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.3 snmpadminstring read-only
The VLAN profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainEvbGpIdRuleSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.4 snmpadminstring read-only
The SBP profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainEvbGpIdRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.5 rowstatus read-only
Row Status for creating/deleting rules.
         alaDaUNPCustDomainVlanTagRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14 no-access
A list of Customer Domain and Vlan Tag based classification rules. This is used to match the vlan tag in a packet and the port's UNP Customer Domain to a User Network Profile entry
               alaDaUNPCustDomainVlanTagRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1 no-access
A Vlan Tag rule entry.
                   alaDaUNPCustDomainVlanTagRuleDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.1 integer32 no-access
The UNP Customer Domain ID for profile lookup.
                   alaDaUNPCustDomainVlanTagRuleVlan 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.2 integer32 no-access
The Vlan Tag used for VLAN classification. The range states the valid Vlan range in the system.
                   alaDaUNPCustDomainVlanTagRuleVlanProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.3 snmpadminstring read-only
The VLAN profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainVlanTagRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.4 rowstatus read-only
Row Status for creating/deleting rules.
                   alaDaUNPCustDomainVlanTagRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.5 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
                   alaDaUNPCustDomainVlanTagRuleSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.6 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainVlanTagRuleTagPosition 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.7 integer read-only
This object specify the tag position to apply this Vlan Tag rule for double tagged frames. Enumeration: 'innerTag': 2, 'notApplicable': 0, 'outerTag': 1.
         alaDaUNPCustDomainIpNetRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15 no-access
A list of IP network address rules. This is used to match the InetAddress of a packet to a User Network Profile entry.
               alaDaUNPCustDomainIpNetRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1 no-access
An IP network address rule entry.
                   alaDaUNPCustDomainIpNetRuleDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.1 integer32 no-access
The UNP Customer Domain ID for profile lookup.
                   alaDaUNPCustDomainIpNetRuleAddrType 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.2 inetaddresstype no-access
The IP network address type used for VLAN classification. For now Only IPv4 is supported.
                   alaDaUNPCustDomainIpNetRuleAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.3 inetaddress no-access
The IP network address used for VLAN classification. Only IPv4 is supported.
                   alaDaUNPCustDomainIpNetRuleMask 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.4 inetaddress no-access
The IP network mask applying to the IP network address.
                   alaDaUNPCustDomainIpNetRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.5 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainIpNetRuleVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.6 integer32 read-only
The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated.
                   alaDaUNPCustDomainIpNetRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.7 rowstatus read-only
Row Status for creating/deleting rules.
                   alaDaUNPCustDomainIpNetRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.8 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
                   alaDaUNPCustDomainIpNetRuleSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.9 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
         alaDaUNPCustDomainMacRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16 no-access
A list of MAC address rules. This is used to match the MAC Address of a packet to a User Network Profile entry
               alaDaUNPCustDomainMacRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1 no-access
A MAC rule entry.
                   alaDaUNPCustDomainMacRuleDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.1 integer32 no-access
The UNP Customer Domain ID for profile lookup.
                   alaDaUNPCustDomainMacRuleAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.2 macaddress no-access
The MAC address used for VLAN classification.
                   alaDaUNPCustDomainMacRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.3 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainMacRuleVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.4 integer32 read-only
The vlan tag to be used for classification of tagged pkts. Vlan tag of 0 indicates no VLAN is associated.
                   alaDaUNPCustDomainMacRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.5 rowstatus read-only
Row Status for creating/deleting rules.
                   alaDaUNPCustDomainMacRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.6 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
                   alaDaUNPCustDomainMacRuleSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.7 snmpadminstring read-only
The SBP profile name in the User Network Profile Table to be applied.
         alaDaUNPCustDomainMacRangeRuleTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17 no-access
A list of MAC range rules. This is used to match the MAC Address Range of a packet to a User Network Profile entry.
               alaDaUNPCustDomainMacRangeRuleEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1 no-access
A MAC range rule entry.
                   alaDaUNPCustDomainMacRangeRuleDomainId 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.1 integer32 no-access
The UNP Customer Domain ID for profile lookup.
                   alaDaUNPCustDomainMacRangeRuleLoAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.2 macaddress no-access
The lower bound of MAC address range used for VLAN classification.
                   alaDaUNPCustDomainMacRangeRuleHiAddr 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.3 macaddress read-only
The upper bound of MAC address range used for VLAN classification.
                   alaDaUNPCustDomainMacRangeRuleProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.4 snmpadminstring read-only
The profile name in the User Network Profile Table to be applied.
                   alaDaUNPCustDomainMacRangeRuleVlanTag 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.5 integer32 read-only
The vlan tag to be used for classification of tagged pkts. The range states the valid vlan range in the system. Vlan tag of 0 indicates no VLAN is associated.
                   alaDaUNPCustDomainMacRangeRuleRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.6 rowstatus read-only
Row Status for creating/deleting rules.
                   alaDaUNPCustDomainMacRangeRuleMCLagConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.7 alamultichassisconfigstatus read-only
Result of MCLAG Consistency Check. All rows will be created as local. Actual status will be set through remote chassis synchronization.
                   alaDaUNPCustDomainMacRangeRuleSpbProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.8 snmpadminstring read-only
The SBP profile name in the User Network Profile Table to be applied.
         alaDaSaaProfileTable 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18 no-access
This table stores the SAA Performance Monitoring profiles that holds the Latency and Jitter Threshold of a network connection.
               alaDaSaaProfileEntry 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1 no-access
Service Classification Profile entry
                   alaDaSaaProfileName 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.1 snmpadminstring no-access
The name of this profile.
                   alaDaSaaProfileLatencyThreshold 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.4 integer32 read-only
The object holds the Latency Threshold. A value of zero (0) means no threshold
                   alaDaSaaProfileJitterThreshold 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.5 integer32 read-only
The object holds the Jitter Threshold. A value of zero (0) means no threshold
                   alaDaSaaProfileRowStatus 1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.6 rowstatus read-only
The row status of this table entry.
     alaIND1DaMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.63.1.2
Branch for DA Module MIB Subsystem Conformance Information.
         alaIND1DaMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1
Branch for DA Module MIB Subsystem Units of Conformance.
             alaDaUserNetProfileGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.1
Collection of DA objects for UNP Table
             alaDaUNPIpNetRuleGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.2
Collection of DA objects for system level UNP Ip rule
             alaDaUNPMacRuleGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.3
Collection of DA objects for system level UNP Mac Rule
             alaDaUNPMacRangeGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.4
Collection of DA objects for system level UNP Mac Range Rule
             alaDaUNPVlanTagGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.5
Collection of DA objects for system level Vlan Tag Rule
             alaDaMacUserGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.6
Collection of DA objects for UNP Mac User
             alaDaUNPPortGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.7
Collection of DA UNP Ports
             alaDaUNPGlobalGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.8
Collection of DA objects for Global parameters
             alaDaNotificationObjectGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.9
Collection of DA objects for Notifications
             alaDaNotificationsGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.10
Collection of Notifications for management of DA.
             alaDaMacVlanUserGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.11
Collection of DA objects for UNP Mac User
             alaDaUnpCustomerDomainGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.12
Collection of DA objects for UNP Group
             alaDaSpbProfileGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.13
Collection of DA objects for Service Classification Profile.
             alaDaUNPCustDomainEvbGpIdRuleGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.14
Collection of DA objects for system level EVB Group ID Rule.
             alaDaUNPCustDomainVlanTagRuleGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.15
Collection of DA objects for system level Vlan Tag Rule
             alaDaUNPCustDomainIpNetRuleGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.16
Collection of DA objects for system level UNP Ip rule
             alaDaUNPCustDomainMacRuleGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.17
Collection of DA objects for system level UNP Mac Rule
             alaDaUNPCustDomainMacRangeGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.18
Collection of DA objects for system level UNP Mac Range Rule
             alaDaUNPGroupObjects 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.19
Collection of DA objects created to keep SNMP4J compiler happy.
             alaDaSaaProfileGroup 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.1.20
Collection of DA objects for SAA Profile.
         alaIND1DaMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.63.1.2.2
Compliance statement for Alcatel DA module.