ALCATEL-IND1-BGP-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-BGP-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, SNMPv2-SMI, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1BGPMIB 1.3.6.1.4.1.6486.801.1.2.1.10.5.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global BGP Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1BGPMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1
Branch For Border Gateway Protocol (BGP) Subsystem Managed Objects.
         alaBgpGlobal 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1
             alaBgpProtoStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.1 integer read-write
Enable/Disable BGP protocol Enumeration: 'enable': 1, 'disable': 2.
             alaBgpAutonomousSystemNumber 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.2 integer read-write
Autonomous System Number.
             alaBgpRouterId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.3 ipaddress read-only
Configured BGP router ID.
             alaBgpIgpSynchStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.4 integer read-write
Enable/Disable BGP IGP Synchronization. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpMedAlways 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.5 integer read-write
Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between routes from different Autonomous Systems. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpDefaultLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.6 gauge32 read-write
The default LOCAL_PREF to be applied to routes learnt from neighbouring autonomous system.
             alaBgpMissingMed 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.7 integer read-write
Specifies how to a missing med in a path attribute. Enumeration: 'worst': 1, 'best': 2.
             alaBgpManualTag 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.8 gauge32 read-only
Manual tag to be used. A value of 0 means no manual tagging.
             alaBgpPromiscuousNeighbours 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.9 integer read-write
Enable/Disable BGP to accept connections from neighbours that are not configured. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpConfedId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.10 integer read-write
Confederation identifier. A value of 0 means this local speaker is not a member of any confederation
             alaBgpDampening 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.11 integer read-write
Enable/Disable BGP route dampening Enumeration: 'enable': 1, 'disable': 2.
             alaBgpDampHalfLifeReach 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.12 integer no-access
The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains reachable. Obsoleted by the variable alaBgpDampHalfLife.
             alaBgpDampHalfLifeUnReach 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.13 integer no-access
The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains unreachable. Obsoleted by the variable alaBgpDampHalfLife.
             alaBgpDampMaxFlapHistory 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.14 integer read-write
The time in seconds the flap history of a route is retained.
             alaBgpDebugLevel 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.15 integer read-write
This object has been deprecated in favour of alaDrcTmBgpDebug Configuration.
             alaBgpFastExternalFailOver 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.16 integer read-write
Enable/Disable Resetting session immediately if a link to a directly connected external peer is operationally down. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpPeerChanges 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.17 integer read-write
Enable/Disable logging of peer state changes to the syslog. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpVersion 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.18 integer read-only
The BGP Version in use.
             alaBgpProtoOperState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.19 integer read-only
The BGP protocol operational state. Enumeration: 'down': 2, 'up': 1.
             alaBgpMaxPeers 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.20 integer read-only
Maximum BGP peers supported.
             alaBgpNumActiveRoutes 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.21 gauge32 read-only
The number of active known routes in the BGP routing table
             alaBgpNumEstabExternalPeers 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.22 counter32 read-only
The number of External Peers that are in ESTABLISHED state.
             alaBgpNumEstabInternalPeers 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.23 counter32 read-only
The number of Internal Peers that are in ESTABLISHED state.
             alaBgpNumPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.24 counter32 read-only
The total number of paths known to the system.
             alaBgpNumFeasiblePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.25 counter32 read-only
The total number of feasible paths known to the system.
             alaBgpNumDampenedPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.26 counter32 read-only
The total number of dampened paths known to the system.
             alaBgpNumIgpSyncWaitPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.27 counter32 read-only
The total number of paths learnt from internal peers that are waiting to be synchronized with IGP.
             alaBgpNumPolicyChgPaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.28 counter32 read-only
The total number of paths that are currently rejected but stored anticipating an inbound policy change for an external peer which is configured to accept dynamic policy changes.
             alaBgpMultiPath 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.29 integer read-write
Enable/Disable Equal-Cost MultiPaths Enumeration: 'enable': 1, 'disable': 2.
             alaBgpRouteReflection 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.30 integer read-write
Enable/Disable Route reflection Enumeration: 'enable': 1, 'disable': 2.
             alaBgpClusterId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.31 ipaddress read-write
The local cluster id of this route reflection cluster.
             alaBgpDampeningClear 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.32 integer read-write
Writing a value of clear into this variable will clear the dampening history. Enumeration: 'clear': 1.
             alaBgpDampCutOff 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.33 integer read-write
When a route's figure of merit reaches this value, the route is considered damped. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 ,a value of 9.45 is encoded as 945.
             alaBgpDampReuse 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.34 integer read-write
When a route's figure of merit decays to this value, the route can be reused. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90 , a value of 9.45 is encoded as 945.
             alaBgpDampCeil 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.35 integer read-only
The maximum value that the figure of merit of a route can attain. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.
             alaBgpAspathCompare 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.36 integer read-write
Specifies whether to include aspath comparison in route selection. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpAsOriginInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.37 integer read-write
The minimum interval in seconds between successive updates advertising the networks belonging to the local autonomous system.
             alaBgpDampHalfLife 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.38 integer read-write
The time in seconds in which the penalty to a flapping route decreases to half its initial value.
             alaBgpGracefulRestart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.39 integer read-write
Enables BGP graceful restart capability. Enumeration: 'enable': 1, 'disable': 2.
             alaBgpRestartInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.40 integer read-write
Determines how long, in seconds, peering BGP routers are told to wait for this router to complete graceful restart and re-establish peering session. It is recommended that this value not be more than the configured Hold Time interval.
             alaBgpRestartStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.41 integer read-only
Indicates whether the router is currently performing a graceful restart. Enumeration: 'inProgress': 2, 'notRestarting': 1.
             alaBgpMultiProtocolIpv4 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.42 integer read-write
Indicates whether IPv4 BGP4 capability is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
             alaBgpMultiProtocolIpv6 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.43 integer read-write
Indicates whether IPv6 BGP4 capability is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
             alaBgpBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.44 integer read-write
Enables/Disables BFd for BGP protocol. Enumeration: 'disabled': 2, 'enabled': 1.
             alaBgpBfdAllNeighborStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.1.45 integer read-write
Enables/Disables BFd for all BGP Neighbors. Enumeration: 'disabled': 2, 'enabled': 1.
         alaBgpPeerTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2 no-access
BGP IPv4 peer table.
             alaBgpPeerEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1 no-access
BGP IPv4 Peer configuration entry.
                 alaBgpPeerAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.1 ipaddress read-only
Ip Address of the peer.
                 alaBgpPeerAS 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.2 integer read-only
Autonomous system of the peer.
                 alaBgpPeerPassive 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.3 integer read-only
Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.4 displaystring read-only
A symbolic name for the neighbour.
                 alaBgpPeerMultiHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.5 integer read-only
If enabled the external peer is allowed to be multiple hops away. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerMaxPrefix 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.6 gauge32 read-only
The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
                 alaBgpPeerMaxPrefixWarnOnly 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.7 integer read-only
If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must be activated and debug level set to 20. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerNextHopSelf 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.8 integer read-only
If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the ip address of the interface attached to this peer. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerSoftReconfig 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.9 integer read-only
Enable/Disable dynamic policy configurability on the connection to this peer. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerInSoftReset 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.10 integer read-only
Route refresh capability is Enabled/Disabled on the connection to this peer. Enumeration: 'disabled': 2, 'enabled': 1.
                 alaBgpPeerIpv4Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.11 integer read-only
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer . Enumeration: 'disabled': 2, 'enabled': 1.
                 alaBgpPeerIpv4Multicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.12 integer read-only
Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer . Enumeration: 'disabled': 2, 'enabled': 1.
                 alaBgpPeerRcvdRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.13 counter32 read-only
The number of route refresh messages received from this peer.
                 alaBgpPeerSentRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.14 counter32 read-only
The number of route refresh messages sent to this peer.
                 alaBgpPeerRouteMapOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.15 displaystring read-only
The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.
                 alaBgpPeerRouteMapIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.16 displaystring read-only
The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.
                 alaBgpPeerLocalAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.17 ipaddress read-only
Local Ip Address of this connection.
                 alaBgpPeerLastDownReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.18 integer read-only
The general reason for termination of last established session with the peer since the protocol was operationally up. Enumeration: 'none': 9, 'fsmUnexpectedEvent': 5, 'peerNotify': 7, 'peerClosed': 6, 'connectionTimeout': 2, 'badMsg': 4, 'holdTimeout': 3, 'transportError': 8, 'userRequest': 1.
                 alaBgpPeerLastDownTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.19 timeticks read-only
The time elapsed since the BGP session with the peer was terminated.
                 alaBgpPeerLastReadTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.20 timeticks read-only
The time elapsed since we last read data from the peer.
                 alaBgpPeerRcvdNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.21 counter32 read-only
The Number of notification messages received from this peer.
                 alaBgpPeerSentNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.22 counter32 read-only
The Number of notification messages sent to this peer.
                 alaBgpPeerLastSentNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.23 integer read-only
The last notification reason sent. Enumeration: 'updateAsLoop': 17, 'openBadId': 6, 'openBadHoldtime': 9, 'updateBadAttrFlags': 14, 'openUnsuppVersion': 4, 'updateMalformAttr': 11, 'openUnsuppCapability': 10, 'ceaseConnCollisionResolution': 30, 'ceaseConnRejected': 28, 'updateBadAspath': 21, 'msghdrBadLen': 2, 'ceaseOutOfResources': 31, 'openUnsuppOption': 7, 'ceaseAdminShutdown': 25, 'ceaseAdminReset': 27, 'openAuthFail': 8, 'ceaseOtherConfChange': 29, 'updateBadNexthop': 18, 'updateBadOrigin': 16, 'updateBadOptAttr': 19, 'updateBadNet': 20, 'holdTimeout': 22, 'fsmError': 23, 'msghdrNoSync': 1, 'none': 32, 'openBadAs': 5, 'msghdrBadType': 3, 'updateUnsuppWknwnAttr': 12, 'updateMissingWknwnAttr': 13, 'ceaseMaxPrefixReached': 24, 'updateBadAttrLen': 15, 'ceasePeerDeconfigured': 26.
                 alaBgpPeerLastRecvNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.24 integer read-only
The last notification reason received. Enumeration: 'updateAsLoop': 17, 'openBadId': 6, 'openBadHoldtime': 9, 'updateBadAttrFlags': 14, 'openUnsuppVersion': 4, 'updateMalformAttr': 11, 'openUnsuppCapability': 10, 'ceaseConnCollisionResolution': 30, 'ceaseConnRejected': 28, 'updateBadAspath': 21, 'msghdrBadLen': 2, 'ceaseOutOfResources': 31, 'openUnsuppOption': 7, 'ceaseAdminShutdown': 25, 'ceaseAdminReset': 27, 'openAuthFail': 8, 'ceaseOtherConfChange': 29, 'updateBadNexthop': 18, 'updateBadOrigin': 16, 'updateBadOptAttr': 19, 'updateBadNet': 20, 'holdTimeout': 22, 'fsmError': 23, 'msghdrNoSync': 1, 'none': 32, 'openBadAs': 5, 'msghdrBadType': 3, 'updateUnsuppWknwnAttr': 12, 'updateMissingWknwnAttr': 13, 'ceaseMaxPrefixReached': 24, 'updateBadAttrLen': 15, 'ceasePeerDeconfigured': 26.
                 alaBgpPeerRcvdPrefixes 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.25 counter32 read-only
The Number of prefixes received from this peer.
                 alaBgpPeerDownTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.26 counter32 read-only
The Number of times this peer session transitioned to IDLE state.
                 alaBgpPeerType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.27 integer read-only
This indicates whether the peer belongs to the local autonomous system(internal) or another autonmous system. Enumeration: 'internal': 1, 'external': 2.
                 alaBgpPeerClearCounter 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.28 integer read-only
Setting a value of clear into this variable will clear the per peer statistics. Enumeration: 'clear': 1.
                 alaBgpPeerAutoReStart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.29 integer read-only
Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerClientStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.30 integer read-only
If enabled this peer is a route reflection client. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerConfedStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.31 integer read-only
If enabled this peer is a member of our confederation. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerRemovePrivateAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.32 integer read-only
If enabled private as numbers are stripped out in the updates sent to this peer. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerTTL 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.33 integer read-only
TTL count for packets on this TCP connection.
                 alaBgpPeerAspathListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.34 displaystring read-only
The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.
                 alaBgpPeerAspathListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.35 displaystring read-only
The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.
                 alaBgpPeerPrefixListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.36 displaystring read-only
The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.
                 alaBgpPeerPrefixListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.37 displaystring read-only
The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.
                 alaBgpPeerCommunityListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.38 displaystring read-only
The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.
                 alaBgpPeerCommunityListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.39 displaystring read-only
The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.
                 alaBgpPeerRestart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.40 integer read-only
Setting a value of restart into this variable will restart the peer. Enumeration: 'restart': 1.
                 alaBgpPeerDefaultOriginate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.41 integer read-only
If enabled a default route is sent to this neighbour. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpPeerReconfigureInBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.42 integer read-only
Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer. Enumeration: 'reconfigure': 1.
                 alaBgpPeerReconfigureOutBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.43 integer read-only
Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer. Enumeration: 'reconfigure': 1.
                 alaBgpPeerMD5Key 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.44 displaystring read-only
Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.
                 alaBgpPeerMD5KeyEncrypt 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.45 octet string read-only
Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.
                 alaBgpPeerRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.46 rowstatus read-only
Row status variable.
                 alaBgpPeerUpTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.47 counter32 read-only
The Number of times this peer session transitioned to ESTABLISHED state.
                 alaBgpPeerLastWriteTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.48 timeticks read-only
The time elapsed since we last sent data to the peer.
                 alaBgpPeerRcvdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.49 counter32 read-only
The Number of messages received from the peer.
                 alaBgpPeerSentMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.50 counter32 read-only
The Number of messages sent to the peer.
                 alaBgpPeerRcvdUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.51 counter32 read-only
The Number of update messages received from the peer.
                 alaBgpPeerSentUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.52 counter32 read-only
The Number of update messages sent to the peer.
                 alaBgpPeerLastTransitionTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.53 timeticks read-only
The time elapsed since the BGP session was operationally up or down to the peer.
                 alaBgpPeerLastUpTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.54 timeticks read-only
The time elapsed since the BGP session with the peer was established.
                 alaBgpPeerBgpId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.55 ipaddress read-only
BGP Identifier of the peer.
                 alaBgpPeerLocalIntfName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.56 displaystring read-only
The user defined name used to identify the local IP interface for this peer's TCP connection.
                 alaBgpPeerRestartTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.57 integer read-only
The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability.
                 alaBgpPeerRestartState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.58 integer read-only
Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart. Enumeration: 'none': 3, 'notRestarting': 1, 'restarting': 2.
                 alaBgpPeerRestartFwdState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.59 integer read-only
Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved. Enumeration: 'notPreserved': 1, 'preserved': 2.
                 alaBgpPeerIpv6Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.60 integer read-only
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message. Enumeration: 'disabled': 2, 'enabled': 1.
                 alaBgpPeerIpv6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.61 ipv6address read-only
The IPv6 nexthop for IPv6 routes advertised to this peer.
                 alaBgpPeerLocalPort 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.62 integer read-only
The local port number for this peer's TCP connection.
                 alaBgpPeerTcpWindowSize 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.63 integer read-only
The size of the socket buffers, in bytes, used for this TCP connection.
                 alaBgpPeerActivateIpv6 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.64 integer read-only
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message. Enumeration: 'disabled': 2, 'enabled': 1.
                 alaBgpPeerBfdStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.65 integer read-only
Enables/Disables BFd for a particular Peer. Enumeration: 'disabled': 2, 'enabled': 1.
                 alaBgpPeerPrefix6ListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.66 displaystring read-only
The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId.
                 alaBgpPeerPrefix6ListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.2.1.67 displaystring read-only
The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId.
         alaBgpAggrTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3 no-access
BGP Aggregate configuration table.
             alaBgpAggrEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1 no-access
BGP Aggregation entry.
                 alaBgpAggrAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.1 ipaddress read-only
Aggregate address.
                 alaBgpAggrMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.2 ipaddress read-only
Aggregate Mask.
                 alaBgpAggrSummarize 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.3 integer read-only
If enabled only aggregate is advertised. Otherwise more specific routes are also advertised. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpAggrSet 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.4 integer read-only
If enabled aggregate all aspaths. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpAggrState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.5 integer read-only
if active the aggregate is actively being advertised. Enumeration: 'active': 1, 'inactive': 2.
                 alaBgpAggrMetric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.6 gauge32 read-only
This specifies the MED to be used when advertising this aggregate to external peers. A value of 0 indicates not to send MED.
                 alaBgpAggrLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.7 gauge32 read-only
This specifies the override default LOCAL PREF to be used when advertising this aggregate to internal peers. A value of 0 indicates not to override the default.
                 alaBgpAggrCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.8 displaystring read-only
The value to set the COMMUNITY attribute when advertising this aggregate.
                 alaBgpAggrRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.3.1.9 rowstatus read-only
Row status variable.
         alaBgpNetworkTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4 no-access
BGP Network configuration table.
             alaBgpNetworkEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1 no-access
BGP Network entry.
                 alaBgpNetworkAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.1 ipaddress read-only
Aggregate address.
                 alaBgpNetworkMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.2 ipaddress read-only
Aggregate Mask.
                 alaBgpNetworkState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.3 integer read-only
Indicates whether the network is being actively advertised or not. Enumeration: 'active': 1, 'inactive': 2.
                 alaBgpNetworkMetric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.4 gauge32 read-only
This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.
                 alaBgpNetworkLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.5 gauge32 read-only
This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.
                 alaBgpNetworkCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.6 displaystring read-only
The value to set the COMMUNITY attribute when advertising this network.
                 alaBgpNetworkRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.4.1.7 rowstatus read-only
Row status variable.
         alaBgpRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5 no-access
BGP Routing table.
             alaBgpRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1 no-access
BGP Route entry.
                 alaBgpRouteAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.1 ipaddress read-only
Destination address.
                 alaBgpRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.2 ipaddress read-only
Destination Mask.
                 alaBgpRouteState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.3 integer read-only
Indicates whether the route is being actively advertised or not. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRoutePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.4 counter32 read-only
Number of total paths available to this destination.
                 alaBgpRouteFeasiblePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.5 counter32 read-only
Number of Feasible paths available to this destination.
                 alaBgpRouteNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.6 ipaddress read-only
The BGP Nexthop to reach this destination.
                 alaBgpRouteIgpNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.7 ipaddress read-only
The IGP Nexthop to reach this destination.
                 alaBgpRouteIsHidden 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.8 integer read-only
Indicates whether the route is hidden by an aggregate. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsAggregate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.9 integer read-only
Indicates whether the route is an aggregate. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsAggregateContributor 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.10 integer read-only
Indicates whether the route is a contributor to an aggregate. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteAdvNeighbors 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.11 displaystring read-only
List of (addresses of) neighbours to whom this route has been advertised is encoded here.
                 alaBgpRouteIsAggregateList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.12 integer read-only
Indicates whether the route is on an aggregate list. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsAggregateWait 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.13 integer read-only
Indicates whether the route is an aggregate waiting for a contributor. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsOnEbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.14 integer read-only
Indicates whether the route is placed on list of EBGP routes. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsOnIbgpClientChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.15 integer read-only
Indicates whether the route is placed on list of IBGP reflector-client routes. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsOnIbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.16 integer read-only
Indicates whether the route is placed on list of IBGP non-reflector-client routes. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsOnLocalChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.17 integer read-only
Indicates whether the route is placed on list of local routes. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsOnDeleteList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.18 integer read-only
Indicates whether the route is placed on delete list. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpRouteIsDampened 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.5.1.19 integer read-only
Indicates whether the route is being route flap dampened. Enumeration: 'yes': 1, 'no': 2.
         alaBgpPathTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6 no-access
BGP Path table.
             alaBgpPathEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1 no-access
BGP path entry.
                 alaBgpPathAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.1 ipaddress read-only
Destination address.
                 alaBgpPathMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.2 ipaddress read-only
Destination Mask.
                 alaBgpPathPeerAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.3 ipaddress read-only
The IP address or the BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0. For peers with an IPv4 address, the value will be the peer's IPv4 address, and the value of alaBgpPathPeerInetType will be ipv4. For peers with an IPv6 address, the value will be the peer's BGP Identifier, and the value of alaBgpPathPeerInetType will be ipv6.
                 alaBgpPathSrcProto 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.4 integer read-only
The protocol from which the path was learnt. Enumeration: 'directHost': 4, 'network': 12, 'ospf': 6, 'ebgp': 9, 'rip': 5, 'ibgp': 10, 'other': 1, 'static': 3, 'aggregate': 11, 'isis': 7, 'local': 2.
                 alaBgpPathWeight 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.5 integer read-only
The weight assigned to this path.
                 alaBgpPathPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.6 gauge32 read-only
The degree of preference assigned to this path.
                 alaBgpPathState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.7 integer read-only
Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart. Enumeration: 'none': 6, 'dampened': 5, 'unSynchronized': 4, 'policyWait': 3, 'stale': 7, 'feasible': 2, 'best': 1.
                 alaBgpPathOrigin 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.8 integer read-only
The ORIGIN attribute of the path. Enumeration: 'none': 9, 'egp': 2, 'incomplete': 3, 'igp': 1.
                 alaBgpPathNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.9 ipaddress read-only
The NEXTHOP attribute of the path.
                 alaBgpPathAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.10 displaystring read-only
The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;.
                 alaBgpPathLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.11 integer read-only
The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.
                 alaBgpPathMed 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.12 gauge32 read-only
The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute.
                 alaBgpPathAtomic 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.13 integer read-only
Indicates whether this path is generated without selecting a less specific route. Enumeration: 'yes': 1, 'no': 2.
                 alaBgpPathAggregatorAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.14 integer read-only
The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.
                 alaBgpPathAggregatorAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.15 ipaddress read-only
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
                 alaBgpPathCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.16 displaystring read-only
The community attribute of the path. The communities are represented as series of 4 octet values.
                 alaBgpPathUnknownAttr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.17 octet string read-only
One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
                 alaBgpPathOriginatorId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.18 ipaddress read-only
The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
                 alaBgpPathClusterList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.19 displaystring read-only
Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
                 alaBgpPathPeerInetType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.20 integer read-only
Indicates whether the peer who sent this path has an IPv4 address or an IPv6 address. If set to ipv4, the peer has an IPv4 address, and the value of alaBgpPathPeerAddr is the peer's IPv4 address. If set to ipv6, the peer has an IPv6 address, and the value of alaBgpPathPeerAddr is the peer's BGP Identifier. For locally sourced routes, the value is set to unknown. Enumeration: 'unknown': 0, 'ipv4': 1, 'ipv6': 2.
                 alaBgpPathPeerName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.6.1.21 displaystring read-only
The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'.
         alaBgpDampTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7 no-access
BGP Dampened paths table.
             alaBgpDampEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1 no-access
BGP Network entry.
                 alaBgpDampAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.1 ipaddress read-only
Destination address.
                 alaBgpDampMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.2 ipaddress read-only
Destination mask.
                 alaBgpDampPeerAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.3 ipaddress read-only
Neighbour address.
                 alaBgpDampFigureOfMerit 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.4 integer read-only
The figure of merit value. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 90, a value of 9.45 is encoded as 945.
                 alaBgpDampFlaps 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.5 counter32 read-only
The number of times this route has flapped.
                 alaBgpDampDuration 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.6 timeticks read-only
Time in seconds since the flap was noticed.
                 alaBgpDampLastUpdateTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.7 timeticks read-only
Time in seconds since this damp entry (figure of merit) was last updated.
                 alaBgpDampReuseTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.8 timeticks read-only
Time in seconds until this route will be reused.
                 alaBgpDampClear 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.7.1.9 integer read-write
A value of clear will clear this damp history information. Enumeration: 'clear': 1.
         alaBgpPolicy 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8
             alaBgpRouteMapTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1 no-access
BGP Policy RouteMap table.
                 alaBgpRouteMapEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1 no-access
BGP Route Map Entry.
                     alaBgpRouteMapName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.1 displaystring read-only
Name of the route map.
                     alaBgpRouteMapInst 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.2 integer read-only
Instance of this route map.
                     alaBgpRouteMapAsPathMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.3 displaystring read-write
This is same as alaBgpAspathMatchListId. It identifies the matching criteria list of Autonomous system paths. Empty quotes indicate no autonomous system paths matching criteria is to be applied.
                     alaBgpRouteMapPrefixMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.4 displaystring read-write
This is same as alaBgpPrefixMatchListId. It identifies the matching criteria list of prefixes. Empty quotes indicate no prefix matching criteria is to be applied.
                     alaBgpRouteMapCommunityMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.5 displaystring read-write
This is same as alaBgpCommunityMatchListId. It identifies the matching criteria list of communities. Empty quotes indicate no community matching criteria is to be applied.
                     alaBgpRouteMapOrigin 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.6 integer read-write
The value to set the origin of the routes matched by this RouteMap instance. A value of none means no origin is to be set. Enumeration: 'none': 255, 'egp': 2, 'incomplete': 3, 'igp': 1.
                     alaBgpRouteMapLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.7 gauge32 read-write
The value to set the LOCAL PREF attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the LOCAL PREF attribute in conjunction with the associated value of alaBgpRouteMapLocalPrefMode.
                     alaBgpRouteMapLocalPrefMode 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.8 integer read-write
This variable specifies how alaBgpRouteMapLocalPref is to be operated on an existing LPREF attribute of a route on which this RouteMap instance is applied to. Enumeration: 'none': 1, 'dec': 3, 'rep': 4, 'inc': 2.
                     alaBgpRouteMapMed 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.9 gauge32 read-write
The value to set the MULTI EXIT DISC attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the MULTI EXIT DISC attribute in conjunction with the associated value of alaBgpRouteMapMedMode.
                     alaBgpRouteMapMedMode 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.10 integer read-write
This variable specifies how alaBgpRouteMapMed is to be operated on an existing MULTI EXIT DISC attribute of a route on which this RouteMap instance is applied to. Enumeration: 'none': 1, 'dec': 3, 'rep': 4, 'inc': 2.
                     alaBgpRouteMapAsPrepend 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.11 displaystring read-write
The value to prepend to the AS_PATH attribute of the routes matched by this RouteMap instance. Empty quotes indicates no AS_PATH prepending is to be done.
                     alaBgpRouteMapSetCommunityMode 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.12 integer read-write
Determines whether alaBgpRouteMapCommunity will be adding to or replacing the COMMUNITY attribute of the routes matched by this RouteMap instance. Enumeration: 'add': 1, 'replace': 2.
                     alaBgpRouteMapCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.13 displaystring read-write
The value to set the COMMUNITY attribute of the routes matched by this RouteMap instance.
                     alaBgpRouteMapMatchAsRegExp 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.14 displaystring read-write
AsPath regular expression matching primitive.
                     alaBgpRouteMapMatchPrefix 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.15 ipaddress read-write
Prefix match primitive.
                     alaBgpRouteMapMatchMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.16 ipaddress read-write
Prefix match mask primitive
                     alaBgpRouteMapMatchCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.17 displaystring read-write
Community match primitive
                     alaBgpRouteMapWeight 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.18 integer read-write
This sets the weight for the incoming route. This parameter has no effect on outbound policy.
                     alaBgpRouteMapAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.19 integer read-write
This determines whether to allow a matching route to pass through. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpRouteMapRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.1.1.20 rowstatus read-write
Row status variable
             alaBgpAspathMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2 no-access
BGP Policy Aspath criteria matching table.
                 alaBgpAspathMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1 no-access
Aspath matching entry .
                     alaBgpAspathMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.1 displaystring read-only
Identifier of this list of autonomous system path matching criteria.
                     alaBgpAspathMatchListRegExp 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.2 displaystring read-only
The regular expression identifying the autnomous system paths to be matched by this instance.
                     alaBgpAspathMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.3 integer read-write
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathMatchListId.
                     alaBgpAspathMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.4 integer read-write
This determines whether to accept or reject a matching route. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpAspathMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.5 rowstatus read-write
Row status variable
                     alaBgpAspathMatchListSubIndex 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.2.1.6 integer read-only
The primary index of this list.
             alaBgpPrefixMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3 no-access
BGP Policy prefix matching criteria table.
                 alaBgpPrefixMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1 no-access
BGP Prefix matching instance.
                     alaBgpPrefixMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.1 displaystring read-only
Identifier of this list of autonomous system path matching criteria.
                     alaBgpPrefixMatchListAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.2 ipaddress read-only
The address to be matched.
                     alaBgpPrefixMatchListMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.3 ipaddress read-only
The mask to be matched.
                     alaBgpPrefixMatchListGE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.4 integer read-write
Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListGE must be > length of (alaBgpPrefixMatchListMask) and < alaBgpPrefixMatchListLE.
                     alaBgpPrefixMatchListLE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.5 integer read-write
Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListLE must be >= alaBgpPrefixMatchListGE and <= 32.
                     alaBgpPrefixMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.6 integer read-write
This determines whether to accept or reject a matching route. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpPrefixMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.3.1.7 rowstatus read-write
Row status variable
             alaBgpCommunityMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4 no-access
BGP Policy Community criteria matching table.
                 alaBgpCommunityMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1 no-access
Community matching entry .
                     alaBgpCommunityMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.1 displaystring read-only
Identifier of this list of communities matching criteria.
                     alaBgpCommunityMatchListString 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.2 displaystring read-only
The string identifying the communities to be matched by this instance.
                     alaBgpCommunityMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.3 integer read-write
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityMatchListId.
                     alaBgpCommunityMatchListType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.4 integer read-write
This determines the matching type. Enumeration: 'exact': 1, 'occur': 2.
                     alaBgpCommunityMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.5 integer read-write
This determines whether to accept or reject a matching route. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpCommunityMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.6 rowstatus read-write
Row status variable.
                     alaBgpCommunityMatchListSubIndex 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.4.1.7 integer read-only
The primary index of this list.
             alaBgpAspathPriMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5 no-access
Priority sorted view of BGP Policy Aspath matching table.
                 alaBgpAspathPriMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1 no-access
Aspath matching entry .
                     alaBgpAspathPriMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.1 displaystring read-only
Identifier of this list of autonomous system path matching criteria.
                     alaBgpAspathPriMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.2 integer read-only
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathPriMatchListId.
                     alaBgpAspathPriMatchListIntIdx 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.3 integer read-only
This is the order in which the matching regular expressions are created in the list identified by alaBgpAspathPriMatchListId.
                     alaBgpAspathPriMatchListRegExp 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.4 displaystring read-only
The regular expression identifying the autnomous system paths to be matched by this instance
                     alaBgpAspathPriMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.5 integer read-only
This determines whether to accept or reject a matching route. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpAspathPriMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.5.1.6 rowstatus read-only
Row status variable.
             alaBgpCommunityPriMatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6 no-access
Priority sorted view of BGP Policy Community matching table.
                 alaBgpCommunityPriMatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1 no-access
Community matching entry .
                     alaBgpCommunityPriMatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.1 displaystring read-only
Identifier of this list of communities matching criteria.
                     alaBgpCommunityPriMatchListPriority 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.2 integer read-only
This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityPriMatchListId.
                     alaBgpCommunityPriMatchListIntIdx 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.3 integer read-only
This determines the order in which the matching regular expressions are created in the list identified by alaBgpCommunityPriMatchListId.
                     alaBgpCommunityPriMatchListString 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.4 displaystring read-only
The string identifying the communities to be matched by this instance.
                     alaBgpCommunityPriMatchListType 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.5 integer read-only
This determines the matching type. Enumeration: 'exact': 1, 'occur': 2.
                     alaBgpCommunityPriMatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.6 integer read-only
This determines whether to accept or reject a matching route. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpCommunityPriMatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.6.1.7 rowstatus read-only
Row status variable
             alaBgpPrefix6MatchListTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7 no-access
BGP Policy prefix6 matching criteria table.
                 alaBgpPrefix6MatchListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1 no-access
BGP Prefix6 matching instance.
                     alaBgpPrefix6MatchListId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.1 displaystring no-access
Identifier of this list of autonomous system path matching criteria.
                     alaBgpPrefix6MatchListAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.2 ipv6address no-access
The IPv6 Prefix to be matched. A value of 0 indicates default route prefix.
                     alaBgpPrefix6MatchListAddrLength 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.3 integer no-access
The length in bits of the IPv6 prefix being matched. A value of 0 indicates default route prefix.
                     alaBgpPrefix6MatchListGE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.4 integer read-only
Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListGE must be > length of (alaBgpPrefix6MatchListAddrLength) and < alaBgpPrefix6MatchListLE.
                     alaBgpPrefix6MatchListLE 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.5 integer read-only
Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListLE must be >= alaBgpPrefix6MatchListGE and <= 32.
                     alaBgpPrefix6MatchListAction 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.6 integer read-only
This determines whether to accept or reject a matching route. Enumeration: 'deny': 2, 'permit': 1.
                     alaBgpPrefix6MatchListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.8.7.1.7 rowstatus read-only
Row status variable
         alaBgpRedistRouteTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9 no-access
A configuration table which controls the routes to be redistributed by BGP from other routing protocols. This table has been deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib.
             alaBgpRedistRouteEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1 no-access
A configuration table which controls the routes to be redistributed by BGP from other routing protocols. This entry has been deprecated. Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib.
                 alaBgpRedistRouteProto 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.1 integer read-write
Protocol from where this route is to be imported from. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'ospf': 6, 'rip': 5, 'static': 3, 'ospf8': 230, 'ospf5': 134, 'ospf4': 102, 'ospf7': 198, 'ospf6': 166, 'local': 2, 'ospf3': 70, 'ospf2': 38.
                 alaBgpRedistRouteDest 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.2 ipaddress read-only
The destination IP address of this route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                 alaBgpRedistRouteMask 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.3 ipaddress read-only
The network mask for this route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                 alaBgpRedistRouteMetric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.4 gauge32 read-write
The med to be sent to external peers. If 0, no med is sent. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                 alaBgpRedistRouteLocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.5 gauge32 read-write
The value to override the default local pref sent to internal peers. If 0, no override is applied. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                 alaBgpRedistRouteCommunity 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.6 displaystring read-write
The value to set the COMMUNITY attribute when advertising this network. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
                 alaBgpRedistRouteSubnetMatch 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.7 integer read-write
Redistribute all the subnet routes if it is enabled. Otherwise, redistribute only matching network route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'enable': 1, 'disable': 2.
                 alaBgpRedistRouteEffect 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.8 integer read-write
Controls the redistribution of routes in this range. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. Enumeration: 'doNotRedistribute': 2, 'redistribute': 1.
                 alaBgpRedistRouteRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.9.1.9 rowstatus read-write
Row status variable. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
         alaBgpDebugTable 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10 no-access
BGP debugging table - has been deprecated in favour of alaDrcTmBgpDebug Configuration.
               alaBgpDebugEntry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1 no-access
BGP debugging entry - has been deprecated in favour of alaDrcTmBgpDebug Configuration.
                   alaBgpDebugEvent 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.1 integer read-only
All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration. Enumeration: 'all': 22, 'sync': 10, 'tcp': 12, 'sendupd': 4, 'notify': 7, 'open': 5, 'keepalive': 6, 'errors': 14, 'damp': 1, 'tm': 19, 'policy': 8, 'mip': 18, 'local': 17, 'warnings': 13, 'redist': 15, 'peer': 16, 'restart': 21, 'info': 20, 'route': 9, 'fsm': 2, 'recvupd': 3, 'aggr': 11.
                   alaBgpDebugStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.2 integer read-write
All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpDebugDescription 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.10.1.3 displaystring read-only
All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration.
         alaBgpNetwork6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11 no-access
BGP Network6 configuration table.
               alaBgpNetwork6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1 no-access
BGP Network6 entry.
                   alaBgpNetwork6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.1 ipv6address read-write
The IPv6 address of the BGP Network.
                   alaBgpNetwork6MaskLen 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.2 unsigned32 read-write
The number of bits that are significant in the IPv6 address prefix of the BGP Network.
                   alaBgpNetwork6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.3 integer read-only
Indicates whether the network is being actively advertised or not. Enumeration: 'active': 1, 'inactive': 2.
                   alaBgpNetwork6Metric 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.4 gauge32 read-write
This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED.
                   alaBgpNetwork6LocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.5 gauge32 read-write
This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default.
                   alaBgpNetwork6Community 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.6 displaystring read-write
The value to set the COMMUNITY attribute when advertising this network.
                   alaBgpNetwork6RowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.11.1.7 rowstatus read-write
Row status variable.
         alaBgpRoute6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12 no-access
BGP IPv6 Routing table.
               alaBgpRoute6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1 no-access
BGP Route entry.
                   alaBgpRoute6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.1 ipv6address read-only
Destination address.
                   alaBgpRoute6MaskLen 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.2 unsigned32 read-only
Destination address length.
                   alaBgpRoute6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.3 integer read-only
Indicates whether the route is being actively advertised or not. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6Paths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.4 counter32 read-only
Number of total paths available to this destination.
                   alaBgpRoute6FeasiblePaths 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.5 counter32 read-only
Number of Feasible paths available to this destination.
                   alaBgpRoute6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.6 ipv6address read-only
The BGP Nexthop to reach this destination.
                   alaBgpRoute6IgpNextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.7 ipv6address read-only
The IGP Nexthop to reach this destination.
                   alaBgpRoute6IsHidden 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.8 integer read-only
Indicates whether the route is hidden by an aggregate. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsAggregate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.9 integer read-only
Indicates whether the route is an aggregate. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsAggregateContributor 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.10 integer read-only
Indicates whether the route is a contributor to an aggregate. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6AdvNeighbors 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.11 displaystring read-only
List of (addresses of) neighbours to whom this route has been advertised is encoded here.
                   alaBgpRoute6IsAggregateList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.12 integer read-only
Indicates whether the route is on an aggregate list. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsAggregateWait 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.13 integer read-only
Indicates whether the route is an aggregate waiting for a contributor. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsOnEbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.14 integer read-only
Indicates whether the route is placed on list of EBGP routes. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsOnIbgpClientChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.15 integer read-only
Indicates whether the route is placed on list of IBGP reflector-client routes. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsOnIbgpChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.16 integer read-only
Indicates whether the route is placed on list of IBGP non-reflector-client routes. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsOnLocalChgList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.17 integer read-only
Indicates whether the route is placed on list of local routes. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsOnDeleteList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.18 integer read-only
Indicates whether the route is placed on delete list. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpRoute6IsDampened 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.12.1.19 integer read-only
Indicates whether the route is being route flap dampened. Enumeration: 'yes': 1, 'no': 2.
         alaBgpPath6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13 no-access
BGP Path table.
               alaBgpPath6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1 no-access
BGP path6 entry.
                   alaBgpPath6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.1 ipv6address read-only
Destination address.
                   alaBgpPath6MaskLen 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.2 unsigned32 read-only
Destination address length.
                   alaBgpPath6PeerBgpId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.3 ipaddress read-only
The BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0.
                   alaBgpPath6SrcProto 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.4 integer read-only
The protocol from which the path was learnt. Enumeration: 'directHost': 4, 'network': 12, 'ospf': 6, 'ebgp': 9, 'rip': 5, 'ibgp': 10, 'other': 1, 'static': 3, 'aggregate': 11, 'isis': 7, 'local': 2.
                   alaBgpPath6Weight 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.5 integer read-only
The weight assigned to this path.
                   alaBgpPath6Pref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.6 gauge32 read-only
The degree of preference assigned to this path.
                   alaBgpPath6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.7 integer read-only
Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system. Stale indicates that the peer that advertised this route's nexthop is in the process of graceful restart. Enumeration: 'none': 6, 'dampened': 5, 'unSynchronized': 4, 'policyWait': 3, 'stale': 7, 'feasible': 2, 'best': 1.
                   alaBgpPath6Origin 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.8 integer read-only
The ORIGIN attribute of the path. Enumeration: 'none': 9, 'egp': 2, 'incomplete': 3, 'igp': 1.
                   alaBgpPath6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.9 ipv6address read-only
The NEXTHOP attribute of the path.
                   alaBgpPath6As 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.10 displaystring read-only
The sequence of AS path segments. Each AS path segment is represented by a triple . The TYPE is a 1-octet field which has two possible values: (1) AS_SET : unordered set of ASs a route in the UPDATE message has traversed. (2) AS_SEQUENCE : ordered set of ASs a route in the UPDATE message has traversed. The LENGTH is a 1-octet field containing the number of ASs in the value field. The VALUE field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
                   alaBgpPath6LocalPref 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.11 integer read-only
The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute.
                   alaBgpPath6Med 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.12 gauge32 read-only
The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute.
                   alaBgpPath6Atomic 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.13 integer read-only
Indicates whether this path is generated without selecting a less specific route. Enumeration: 'yes': 1, 'no': 2.
                   alaBgpPath6AggregatorAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.14 integer read-only
The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute.
                   alaBgpPath6AggregatorAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.15 ipaddress read-only
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
                   alaBgpPath6Community 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.16 displaystring read-only
The community attribute of the path. The communities are represented as series of 4 octet values.
                   alaBgpPath6UnknownAttr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.17 octet string read-only
One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
                   alaBgpPath6OriginatorId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.18 ipaddress read-only
The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
                   alaBgpPath6ClusterList 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.19 displaystring read-only
Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indicates the absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Section 7
                   alaBgpPath6PeerName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.13.1.20 displaystring read-only
The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'.
         alaBgpPeer6Table 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14 no-access
BGP IPv6 peer table.
               alaBgpPeer6Entry 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1 no-access
BGP IPv6 Peer configuration entry.
                   alaBgpPeer6Addr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.1 ipv6address read-only
Ipv6 Address of the peer.
                   alaBgpPeer6AS 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.2 integer read-write
Autonomous system of the peer.
                   alaBgpPeer6Passive 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.3 integer read-write
Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6Name 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.4 displaystring read-write
A symbolic name for the neighbour.
                   alaBgpPeer6MultiHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.5 integer read-write
If enabled the external peer is allowed to be multiple hops away. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6MaxPrefix 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.6 gauge32 read-write
The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
                   alaBgpPeer6MaxPrefixWarnOnly 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.7 integer read-write
If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must be activated and debug level set to 20. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6NextHopSelf 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.8 integer read-write
If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the IPv6 address of the interface attached to this peer. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6SoftReconfig 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.9 integer read-write
Enable/Disable dynamic policy configurability on the connection to this peer. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6InSoftReset 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.10 integer read-only
Route refresh capability is Enabled/Disabled on the connection to this peer. Enumeration: 'disabled': 2, 'enabled': 1.
                   alaBgpPeer6Ipv4Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.11 integer read-only
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer . Enumeration: 'disabled': 2, 'enabled': 1.
                   alaBgpPeer6Ipv4Multicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.12 integer read-only
Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer . Enumeration: 'disabled': 2, 'enabled': 1.
                   alaBgpPeer6RcvdRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.13 counter32 read-only
The number of route refresh messages received from this peer.
                   alaBgpPeer6SentRtRefreshMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.14 counter32 read-only
The number of route refresh messages sent to this peer.
                   alaBgpPeer6RouteMapOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.15 displaystring read-write
The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName.
                   alaBgpPeer6RouteMapIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.16 displaystring read-write
The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName.
                   alaBgpPeer6LocalAddr 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.17 ipv6address read-write
Local IPv6 address of this connection.
                   alaBgpPeer6LastDownReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.18 integer read-only
The general reason for termination of last established session with the peer since the protocol was operationally up. Enumeration: 'none': 9, 'fsmUnexpectedEvent': 5, 'peerNotify': 7, 'peerClosed': 6, 'connectionTimeout': 2, 'badMsg': 4, 'holdTimeout': 3, 'transportError': 8, 'userRequest': 1.
                   alaBgpPeer6LastDownTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.19 timeticks read-only
The time elapsed since the BGP session with the peer was terminated.
                   alaBgpPeer6LastReadTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.20 timeticks read-only
The time elapsed since we last read data from the peer.
                   alaBgpPeer6RcvdNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.21 counter32 read-only
The Number of notification messages received from this peer.
                   alaBgpPeer6SentNotifyMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.22 counter32 read-only
The Number of notification messages sent to this peer.
                   alaBgpPeer6LastSentNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.23 integer read-only
The last notification reason sent. Enumeration: 'updateAsLoop': 17, 'openBadId': 6, 'openBadHoldtime': 9, 'updateBadAttrFlags': 14, 'openUnsuppVersion': 4, 'updateMalformAttr': 11, 'openUnsuppCapability': 10, 'ceaseConnCollisionResolution': 30, 'ceaseConnRejected': 28, 'updateBadAspath': 21, 'msghdrBadLen': 2, 'ceaseOutOfResources': 31, 'openUnsuppOption': 7, 'ceaseAdminShutdown': 25, 'ceaseAdminReset': 27, 'openAuthFail': 8, 'ceaseOtherConfChange': 29, 'updateBadNexthop': 18, 'updateBadOrigin': 16, 'updateBadOptAttr': 19, 'updateBadNet': 20, 'holdTimeout': 22, 'fsmError': 23, 'msghdrNoSync': 1, 'none': 32, 'openBadAs': 5, 'msghdrBadType': 3, 'updateUnsuppWknwnAttr': 12, 'updateMissingWknwnAttr': 13, 'ceaseMaxPrefixReached': 24, 'updateBadAttrLen': 15, 'ceasePeerDeconfigured': 26.
                   alaBgpPeer6LastRecvNotifyReason 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.24 integer read-only
The last notification reason received. Enumeration: 'updateAsLoop': 17, 'openBadId': 6, 'openBadHoldtime': 9, 'updateBadAttrFlags': 14, 'openUnsuppVersion': 4, 'updateMalformAttr': 11, 'openUnsuppCapability': 10, 'ceaseConnCollisionResolution': 30, 'ceaseConnRejected': 28, 'updateBadAspath': 21, 'msghdrBadLen': 2, 'ceaseOutOfResources': 31, 'openUnsuppOption': 7, 'ceaseAdminShutdown': 25, 'ceaseAdminReset': 27, 'openAuthFail': 8, 'ceaseOtherConfChange': 29, 'updateBadNexthop': 18, 'updateBadOrigin': 16, 'updateBadOptAttr': 19, 'updateBadNet': 20, 'holdTimeout': 22, 'fsmError': 23, 'msghdrNoSync': 1, 'none': 32, 'openBadAs': 5, 'msghdrBadType': 3, 'updateUnsuppWknwnAttr': 12, 'updateMissingWknwnAttr': 13, 'ceaseMaxPrefixReached': 24, 'updateBadAttrLen': 15, 'ceasePeerDeconfigured': 26.
                   alaBgpPeer6RcvdPrefixes 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.25 counter32 read-only
The Number of prefixes received from this peer.
                   alaBgpPeer6DownTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.26 counter32 read-only
The Number of times this peer session transitioned to IDLE state.
                   alaBgpPeer6Type 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.27 integer read-only
This indicates whether the peer belongs to the local autonomous system(internal) or another autonomous system. Enumeration: 'internal': 1, 'external': 2.
                   alaBgpPeer6ClearCounter 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.28 integer read-write
Setting a value of clear into this variable will clear the per peer statistics. Enumeration: 'clear': 1.
                   alaBgpPeer6AutoReStart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.29 integer read-write
Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6ClientStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.30 integer read-write
If enabled this peer is a route reflection client. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6ConfedStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.31 integer read-write
If enabled this peer is a member of our confederation. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6RemovePrivateAs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.32 integer read-write
If enabled private as numbers are stripped out in the updates sent to this peer. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6TTL 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.33 integer read-write
TTL count for packets on this TCP connection.
                   alaBgpPeer6AspathListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.34 displaystring read-write
The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId.
                   alaBgpPeer6AspathListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.35 displaystring read-write
The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId.
                   alaBgpPeer6PrefixListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.36 displaystring read-write
The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId.
                   alaBgpPeer6PrefixListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.37 displaystring read-write
The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId.
                   alaBgpPeer6CommunityListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.38 displaystring read-write
The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId.
                   alaBgpPeer6CommunityListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.39 displaystring read-write
The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId.
                   alaBgpPeer6Restart 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.40 integer read-write
Setting a value of restart into this variable will restart the peer. Enumeration: 'restart': 1.
                   alaBgpPeer6DefaultOriginate 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.41 integer read-write
If enabled a default route is sent to this neighbour. Enumeration: 'enable': 1, 'disable': 2.
                   alaBgpPeer6ReconfigureInBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.42 integer read-write
Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer. Enumeration: 'reconfigure': 1.
                   alaBgpPeer6ReconfigureOutBound 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.43 integer read-write
Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer. Enumeration: 'reconfigure': 1.
                   alaBgpPeer6MD5Key 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.44 displaystring read-write
Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant.
                   alaBgpPeer6MD5KeyEncrypt 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.45 octet string read-only
Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot.
                   alaBgpPeer6RowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.46 rowstatus read-write
Row status variable.
                   alaBgpPeer6UpTransitions 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.47 counter32 read-only
The Number of times this peer session transitioned to ESTABLISHED state.
                   alaBgpPeer6LastWriteTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.48 timeticks read-only
The time elapsed since we last sent data to the peer.
                   alaBgpPeer6RcvdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.49 counter32 read-only
The Number of messages received from the peer.
                   alaBgpPeer6SentMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.50 counter32 read-only
The Number of messages sent to the peer.
                   alaBgpPeer6RcvdUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.51 counter32 read-only
The Number of update messages received from the peer.
                   alaBgpPeer6SentUpdMsgs 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.52 counter32 read-only
The Number of update messages sent to the peer.
                   alaBgpPeer6LastTransitionTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.53 timeticks read-only
The time elapsed since the BGP session was operationally up or down to the peer.
                   alaBgpPeer6LastUpTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.54 timeticks read-only
The time elapsed since the BGP session with the peer was established.
                   alaBgpPeer6BgpId 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.55 ipaddress read-only
BGP Identifier of the peer.
                   alaBgpPeer6LocalIntfName 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.56 displaystring read-write
The user defined name used to identify the local IPv6 interface for this peer's TCP connection.
                   alaBgpPeer6RestartTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.57 integer read-only
The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised this capability.
                   alaBgpPeer6RestartState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.58 integer read-only
Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart. Enumeration: 'none': 3, 'notRestarting': 1, 'restarting': 2.
                   alaBgpPeer6RestartFwdState 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.59 integer read-only
Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful restart capability. For peers that are not capable of graceful restart, this value will be notPreserved. Enumeration: 'notPreserved': 1, 'preserved': 2.
                   alaBgpPeer6Ipv6Unicast 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.60 integer read-only
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message. Enumeration: 'disabled': 2, 'enabled': 1.
                   alaBgpPeer6HoldTime 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.61 integer read-only
Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in alaBgpPeer6HoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the session has not been established with the peer, or, the value of alaBgpPeer6HoldTimeConfigured is zero (0).
                   alaBgpPeer6KeepAlive 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.62 integer read-only
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with alaBgpPeer6HoldTime, it has the same proportion as what alaBgpPeer6KeepAliveConfigured has when compared with alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), it indicates that the session has not been established with the peer, or, the value of alaBgpPeer6KeepAliveConfigured is zero (0).
                   alaBgpPeer6ConnRetryInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.63 integer read-write
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
                   alaBgpPeer6HoldTimeConfigured 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.64 integer read-write
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (alaBgpPeer6HoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be negotiated with the peer. The suggested value for this timer is 90 seconds.
                   alaBgpPeer6KeepAliveConfigured 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.65 integer read-write
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in alaBgpPeer6HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by alaBgpPeer6KeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of alaBgpPeer6HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
                   alaBgpPeer6Ipv4NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.66 ipaddress read-write
The IPv4 nexthop address to be used for IPv4 routes advertised to this peer.
                   alaBgpPeer6Ipv6NextHop 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.67 ipv6address read-write
The IPv6 nexthop address to be used for IPv6 routes advertised to this peer.
                   alaBgpPeer6AdminStatus 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.68 integer read-write
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication. Enumeration: 'start': 2, 'stop': 1.
                   alaBgpPeer6State 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.69 integer read-only
The BGP peer connection state. Enumeration: 'established': 6, 'openconfirm': 5, 'opensent': 4, 'idle': 1, 'connect': 2, 'active': 3.
                   alaBgpPeer6LocalPort 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.70 integer read-only
The local port number for this peer's TCP connection.
                   alaBgpPeer6TcpWindowSize 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.71 integer read-only
The size of the socket buffers, in bytes, used for this TCP connection.
                   alaBgpPeer6ActivateIpv6 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.72 integer read-write
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message. Enumeration: 'disabled': 2, 'enabled': 1.
                   alaBgpPeer6MinRouteAdvertisementInterval 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.73 integer read-write
Time interval in seconds for the MinRouteAdvertisementInterval timer.
                   alaBgpPeer6Prefix6ListOut 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.74 displaystring read-write
The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId.
                   alaBgpPeer6Prefix6ListIn 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.1.14.1.75 displaystring read-write
The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId.
     alcatelIND1BGPMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2
Branch For Border Gateway Protocol (BGP) Subsystem Conformance Information.
         alcatelIND1BGPMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1
Branch For Border Gateway Protocol (BGP) Subsystem Units Of Conformance.
             alabgpMIBGlobalsGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.1
A collection of objects providing information on global BGP state.
             alabgpMIBPeerGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.2
A collection of objects for managing BGP peers.
             alabgpMIBAggrGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.3
A collection of objects for managing BGP aggregates.
             alabgpMIBNetworkGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.4
A collection of objects for managing BGP networks.
             alabgpMIBRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.5
A collection of objects for managing BGP routes.
             alabgpMIBPathAttrGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.6
A collection of objects for managing BGP paths attributes.
             alabgpMIBDampGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.7
A collection of objects for managing BGP dampening.
             alabgpMIBRouteMapGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.8
A collection of objects for managing BGP route maps.
             alabgpMIBAspathListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.9
A collection of objects for managing BGP aspath lists.
             alabgpMIBPrefixListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.10
A collection of objects for managing BGP prefix lists.
             alabgpMIBCommunityListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.11
A collection of objects for managing BGP community lists.
             alabgpMIBAspathPriListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.12
A collection of objects for managing BGP aspath lists by priority.
             alabgpMIBCommunityPriListGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.13
A collection of objects for managing BGP community lists by priority.
             alabgpMIBRedistRouteGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.14
A collection of objects for managing BGP redistribution routes. These objects have been deprecated, and this group is no longer mandatory.
             alabgpMIBDebugGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.15
A collection of objects for managing BGP debug infos. These objects have been deprecated, and this group is no longer mandatory.
             alabgpMIBNetwork6Group 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.16
A collection of objects for managing BGP IPv6 networks.
             alabgpMIBRoute6Group 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.17
A collection of objects for managing BGP routes.
             alabgpMIBPath6AttrGroup 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.18
A collection of objects for managing BGP paths attributes.
             alabgpMIBPeer6Group 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.1.19
A collection of objects for managing BGP peers.
         alcatelIND1BGPMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.2
Branch For Border Gateway Protocol (BGP) Subsystem Compliance Statements.
             alcatelIND1BGPMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.5.1.2.2.1
The compliance statement for entities which implement the BGP4 mib.