AI-AP-MIB: View SNMP OID List / Download MIB

VENDOR: ARUBA


 Home MIB: AI-AP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ARUBA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 aiMIB 1.3.6.1.4.1.14823.2.3.3.1
This MIB is for managing Aruba Instant WLAN
     aiInfoGroup 1.3.6.1.4.1.14823.2.3.3.1.1
         aiVirtualControllerKey 1.3.6.1.4.1.14823.2.3.3.1.1.1 displaystring read-only
Unique Virtual Controller key
         aiVirtualControllerName 1.3.6.1.4.1.14823.2.3.3.1.1.2 displaystring read-only
Virtual Controller name
         aiVirtualControllerOrganization 1.3.6.1.4.1.14823.2.3.3.1.1.3 displaystring read-only
Virtual Controller organization
         aiVirtualControllerVersion 1.3.6.1.4.1.14823.2.3.3.1.1.4 displaystring read-only
Software Version
         aiVirtualControllerIPAddress 1.3.6.1.4.1.14823.2.3.3.1.1.5 ipaddress read-only
Virtual Controller IP Address. If this is not set, returns 0.0.0.0
         aiMasterIPAddress 1.3.6.1.4.1.14823.2.3.3.1.1.6 ipaddress read-only
IP Address of AP where virtual controller software is active
         aiWlanSSIDTable 1.3.6.1.4.1.14823.2.3.3.1.1.7 no-access
             aiWlanSSIDEntry 1.3.6.1.4.1.14823.2.3.3.1.1.7.1 no-access
                 aiSSIDIndex 1.3.6.1.4.1.14823.2.3.3.1.1.7.1.1 integer32 read-only
SSID Index
                 aiSSID 1.3.6.1.4.1.14823.2.3.3.1.1.7.1.2 displaystring read-only
SSID
                 aiSSIDStatus 1.3.6.1.4.1.14823.2.3.3.1.1.7.1.3 integer read-only
Indicates the whether the SSID is enabled(0) or disabled(1) Enumeration: 'enable': 0, 'disable': 1.
     aiStateGroup 1.3.6.1.4.1.14823.2.3.3.1.2
         aiAccessPointTable 1.3.6.1.4.1.14823.2.3.3.1.2.1 no-access
This contains all access points connected to the virtual controller. This table is empty on AP where virtual controller is not active
             aiAccessPointEntry 1.3.6.1.4.1.14823.2.3.3.1.2.1.1 no-access
                 aiAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.1 macaddress read-only
Access Point MAC Address
                 aiAPName 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.2 displaystring read-only
Access Point name
                 aiAPIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.3 ipaddress read-only
Access Point IP Address
                 aiAPSerialNum 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.4 displaystring read-only
Access Point Serial Number
                 aiAPModel 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.5 object identifier read-only
Access Point System OID
                 aiAPModelName 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.6 displaystring read-only
Access Point Model Name
                 aiAPCPUUtilization 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.7 integer32 read-only
Access Point CPU Utilization
                 aiAPMemoryFree 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.8 integer32 read-only
Amount of memory free in the access point in bytes
                 aiAPUptime 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.9 timeticks read-only
Access Point uptime
                 aiAPTotalMemory 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.10 integer32 read-only
Total amount of memory available in the AP in bytes
                 aiAPStatus 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.11 integer read-only
Indicates the Access Point Status Enumeration: 'down': 2, 'up': 1.
         aiRadioTable 1.3.6.1.4.1.14823.2.3.3.1.2.2 no-access
This table contains all radios of all access points connected to the virtual controller. This table is indexed by Access Point MAC Address and radio number
             aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.2.1 no-access
                 aiRadioAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1 macaddress read-only
MAC Address of access point where this radio is active
                 aiRadioIndex 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2 integer32 read-only
Radio number
                 aiRadioMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3 macaddress read-only
Radio MAC Address
                 aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.4 integer32 read-only
Radio channel. First byte contains primary channel and first two bits on second byte contains indicator for secondary channel. If first two bits of second byte is 0, it is a 20MHz channel. If first two bits of second byte is 01, secondary channel is above primary channel, if first two bits of second by is 10, secondary channel is below the primary channel.
                 aiRadioTransmitPower 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.5 integer32 read-only
Radio transmit power
                 aiRadioNoiseFloor 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.6 integer32 read-only
Radio noise floor in dBm
                 aiRadioUtilization4 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.7 integer32 read-only
Radio channel utilization 4 second average
                 aiRadioUtilization64 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.8 integer32 read-only
Radio channel utilization 64 second average
                 aiRadioTxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.9 counter32 read-only
Total transmitted frames
                 aiRadioTxMgmtFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.10 counter32 read-only
Transmitted management frames
                 aiRadioTxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.11 counter32 read-only
Transmitted data frames
                 aiRadioTxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.12 counter32 read-only
Transmitted data bytes
                 aiRadioTxDrops 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.13 counter32 read-only
Total frames dropped during transmission
                 aiRadioRxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.14 counter32 read-only
Total received frames
                 aiRadioRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.15 counter32 read-only
Received data frames
                 aiRadioRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.16 counter32 read-only
Received data bytes
                 aiRadioRxMgmtFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.17 counter32 read-only
Received management frames
                 aiRadioRxBad 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.18 counter32 read-only
Frames received in error
                 aiRadioPhyEvents 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.19 counter32 read-only
Number of phy events that indicates frames not received because of interference
                 aiRadioStatus 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.20 integer read-only
Radio state of AP - UP/DOWN Enumeration: 'down': 2, 'up': 1.
         aiWlanTable 1.3.6.1.4.1.14823.2.3.3.1.2.3 no-access
This table contains all BSSIDs active on this virtual controller. This table is indexed by Access Point MAC Address and a WLAN Index
             aiWlanEntry 1.3.6.1.4.1.14823.2.3.3.1.2.3.1 no-access
                 aiWlanAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.1 macaddress read-only
MAC Address of access point where WLAN is active
                 aiWlanIndex 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2 integer32 read-only
Index of WLAN. This is a unique index assigned to the WLAN active on the access point.
                 aiWlanESSID 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3 displaystring read-only
ESSID of WLAN
                 aiWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.4 macaddress read-only
BSSID of WLAN
                 aiWlanTxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.5 counter32 read-only
Total transmitted frames
                 aiWlanTxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.6 counter32 read-only
Transmitted data frames
                 aiWlanTxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.7 counter32 read-only
Transmitted data bytes
                 aiWlanRxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.8 counter32 read-only
Total received frames
                 aiWlanRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.9 counter32 read-only
Received data frames
                 aiWlanRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.10 counter32 read-only
Received data bytes
         aiClientTable 1.3.6.1.4.1.14823.2.3.3.1.2.4 no-access
This table contains information about all clients connected to the virtual controller. When a client roams from one access point to another, all counters in this table are reset to 0. aiClientUptime also get reset on a mobility event
             aiClientEntry 1.3.6.1.4.1.14823.2.3.3.1.2.4.1 no-access
                 aiClientMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.1 macaddress read-only
MAC Address of client
                 aiClientWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.2 macaddress read-only
BSSID of WLAN where client is associated
                 aiClientIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.3 ipaddress read-only
Client IP Address
                 aiClientAPIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.4 ipaddress read-only
Associated Access Point IP Address
                 aiClientName 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.5 displaystring read-only
Name of user using the client
                 aiClientOperatingSystem 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.6 displaystring read-only
Client operating system
                 aiClientSNR 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.7 integer32 read-only
Signal to noise ratio of client connection to the access point
                 aiClientTxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.8 counter32 read-only
Total frames transmitted by the client
                 aiClientTxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.9 counter32 read-only
Total bytes transmitted by the client
                 aiClientTxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.10 counter32 read-only
Total number of retry frames transmitted by the client
                 aiClientTxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.11 integer32 read-only
Transmit rate of client in mbps
                 aiClientRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.12 counter32 read-only
Total frames received by the client
                 aiClientRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.13 counter32 read-only
Total bytes received by the client
                 aiClientRxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.14 counter32 read-only
Total number of retry frames received by the client
                 aiClientRxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.15 integer32 read-only
Receive rate of client in mbps
                 aiClientUptime 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.16 timeticks read-only
Client uptime. On mobility event all counters are reset to 0 and uptime gets reset to 0.
         aiVoiceClientTable 1.3.6.1.4.1.14823.2.3.3.1.2.5 no-access
Table of voice clients
             aiVoiceClientEntry 1.3.6.1.4.1.14823.2.3.3.1.2.5.1 no-access
Entry of a voice client
                 aiClientMac 1.3.6.1.4.1.14823.2.3.3.1.2.5.1.1 macaddress read-only
MAC address of voice client
                 aiClientIP 1.3.6.1.4.1.14823.2.3.3.1.2.5.1.2 ipaddress read-only
IP address of voice client
                 aiClientAPMac 1.3.6.1.4.1.14823.2.3.3.1.2.5.1.3 macaddress read-only
MAC address of AP on which voice client is associated currently
                 aiClientAPName 1.3.6.1.4.1.14823.2.3.3.1.2.5.1.4 displaystring read-only
Name of AP on which voice client is associated currently
     aiManagedInfoGroup 1.3.6.1.4.1.14823.2.3.3.1.3
         aiManagedModeSinceLastSync 1.3.6.1.4.1.14823.2.3.3.1.3.1 displaystring read-only
Time since last config was applied
     aiTrapsGroup 1.3.6.1.4.1.14823.2.3.3.1.200
             aiTrapObjectsGroup 1.3.6.1.4.1.14823.2.3.3.1.200.1
                 wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 macaddress no-access
This object is used in the traps to indicate the wired MAC address of an access point, for which the trap is being raised.
                 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.2 ipaddress no-access
This object is used in the traps to indicate the IP address of an access point, for which the trap is being raised.
                 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.3 macaddress no-access
This object is used in the traps to indicate the BSSID of the access point, for which the trap is being raised.
                 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.3.1.200.1.4 displaystring no-access
This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised.
                 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.5 macaddress no-access
This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.
                 wlsxTrapTargetAPSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.6 displaystring no-access
This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.
                 wlsxTrapTargetAPChannel 1.3.6.1.4.1.14823.2.3.3.1.200.1.7 integer32 no-access
This object is used in the traps to indicate the channel of the access point, for which the trap is being raised. If an wlsxr monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.
                 wlsxTrapNodeMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.8 macaddress no-access
This object is used in the traps to indicate the MAC address of a node.
                 wlsxTrapSourceMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.9 macaddress no-access
This object is used in the traps to indicate the MAC address of the source.
                 wlsxReceiverMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.10 macaddress no-access
This object is used in the traps to indicate the MAC address of the receiver.
                 wlsxTrapTransmitterMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.11 macaddress no-access
This object is used in the traps to indicate the MAC address of the transmitter.
                 wlsxTrapReceiverMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.12 macaddress no-access
This object is used in the traps to indicate the MAC address of the receiver.
                 wlsxTrapSnr 1.3.6.1.4.1.14823.2.3.3.1.200.1.13 integer32 no-access
This object is used in the traps to indicate the Signal to Noise ratio.
                 wlsxTrapSignatureName 1.3.6.1.4.1.14823.2.3.3.1.200.1.14 displaystring no-access
This object is used in the traps to indicate the Signature Name.
                 wlsxTrapFrameType 1.3.6.1.4.1.14823.2.3.3.1.200.1.15 arubaframetype no-access
This object is used in the traps to indicate the Frame Type
                 wlsxTrapAddressType 1.3.6.1.4.1.14823.2.3.3.1.200.1.16 arubaaddresstype no-access
This object is used in the traps to indicate the Address type.
                 wlsxTrapAPLocation 1.3.6.1.4.1.14823.2.3.3.1.200.1.17 displaystring no-access
This object is used in the traps to indicate the Location of the AP.
                 wlsxTrapAPChannel 1.3.6.1.4.1.14823.2.3.3.1.200.1.18 integer32 no-access
This object is used in the traps to indicate the Current Channel.
                 wlsxTrapAPTxPower 1.3.6.1.4.1.14823.2.3.3.1.200.1.19 integer32 no-access
This object is used in the traps to indicate the AP Transmit Power.
                 wlsxTrapMatchedMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.20 macaddress no-access
This object is used in the traps to indicate the MAC address
                 wlsxTrapMatchedIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.21 ipaddress no-access
This object is used in the traps to indicate the IP address
                 wlsxTrapRogueIfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.22 displaystring no-access
This object is used to point to the WEBUI Rogue AP information URL.
                 wlsxTrapVlanId 1.3.6.1.4.1.14823.2.3.3.1.200.1.23 integer32 no-access
This object is used in the traps to indicate the VLAN Id.
                 wlsxTrapAdminStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.24 arubaenablevalue no-access
This object is used in the traps to indicate the admin status of VLAN.
                 wlsxTrapOperStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.25 arubaoperstatevalue no-access
This object is used in the traps to indicate the admin status of VLAN.
                 wlsxTrapAuthServerName 1.3.6.1.4.1.14823.2.3.3.1.200.1.26 displaystring no-access
This object is used in the traps to indicate the Authentication Server used for Authentication.
                 wlsxTrapAuthServerTimeout 1.3.6.1.4.1.14823.2.3.3.1.200.1.27 integer32 no-access
This object is used in the traps to indicate the Authentication Server Timeout.
                 wlsxTrapCardSlot 1.3.6.1.4.1.14823.2.3.3.1.200.1.28 integer32 no-access
This object is used in the traps to indicate the Slot in which this card is present.
                 wlsxTrapTemperatureValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.29 displaystring no-access
This object is used in the traps to indicate the Temperature Value.
                 wlsxTrapProcessName 1.3.6.1.4.1.14823.2.3.3.1.200.1.30 displaystring no-access
This object is used in the traps to indicate the Process name.
                 wlsxTrapFanNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.31 integer32 no-access
This object is used in the traps to indicate the Fan Number.
                 wlsxTrapVoltageType 1.3.6.1.4.1.14823.2.3.3.1.200.1.32 displaystring no-access
This object is used in the traps to indicate the type of Voltage.
                 wlsxTrapVoltageValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.33 displaystring no-access
This object is used in the traps to indicate the voltage value in Float.
                 wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.34 arubablacklistreason no-access
The Reason for which a station is black listed.
                 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.35 ipaddress no-access
This object is used in a trap to identify a spoofed IP address.
                 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.36 macaddress no-access
This object is used in a trap to identify an old MAC address.
                 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.37 macaddress no-access
This object is used in a trap to identify a New MAC address.
                 wlsxTrapDBName 1.3.6.1.4.1.14823.2.3.3.1.200.1.38 displaystring no-access
This object is used in a trap to identify name of the database.
                 wlsxTrapDBUserName 1.3.6.1.4.1.14823.2.3.3.1.200.1.39 displaystring no-access
This object is used in a trap to identify name of the database user.
                 wlsxTrapDBIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.40 displaystring no-access
This object is used in a trap to identify the IpAddress of the Database.
                 wlsxTrapDBType 1.3.6.1.4.1.14823.2.3.3.1.200.1.41 arubadbtype no-access
This object is used in a trap to identify the port of the user.
                 wlsxTrapVrrpID 1.3.6.1.4.1.14823.2.3.3.1.200.1.42 integer32 no-access
This object contains the Virtual Router Identifier.
                 wlsxTrapVrrpMasterIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.43 ipaddress no-access
This object contains the Master IP address.
                 wlsxTrapVrrpOperState 1.3.6.1.4.1.14823.2.3.3.1.200.1.44 arubavrrpstate no-access
This object represents the VRRP Operational state.
                 wlsxTrapESIServerGrpName 1.3.6.1.4.1.14823.2.3.3.1.200.1.45 displaystring no-access
This object represents the External Services Interface (ESI) Server Group name
                 wlsxTrapESIServerName 1.3.6.1.4.1.14823.2.3.3.1.200.1.46 displaystring no-access
This object represents the External Services Interface (ESI) Server Name
                 wlsxTrapESIServerIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.47 ipaddress no-access
This object represents the External Services Interface (ESI) Server IP address
                 wlsxTrapLicenseDaysRemaining 1.3.6.1.4.1.14823.2.3.3.1.200.1.48 integer32 no-access
This object represents number of the days remaining prior to a license expiry.
                 wlsxTrapSwitchIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.49 ipaddress no-access
This object represents the controller IP address.
                 wlsxTrapSwitchRole 1.3.6.1.4.1.14823.2.3.3.1.200.1.50 arubaswitchrole no-access
This object represents the Role of the controller.
                 wlsxTrapUserIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.51 ipaddress no-access
This object represents IP address of the User.
                 wlsxTrapUserPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.52 macaddress no-access
This object represents MAC address of the User.
                 wlsxTrapUserName 1.3.6.1.4.1.14823.2.3.3.1.200.1.53 displaystring no-access
This object represents the user name.
                 wlsxTrapUserRole 1.3.6.1.4.1.14823.2.3.3.1.200.1.54 displaystring no-access
This object represents the Authentication method of the user.
                 wlsxTrapUserAuthenticationMethod 1.3.6.1.4.1.14823.2.3.3.1.200.1.55 arubaauthenticationmethods no-access
This object represents the Authentication method of the user.
                 wlsxTrapAPRadioNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.56 integer32 no-access
This object represents the radio number.
                 wlsxTrapRogueInfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.57 displaystring no-access
This object is used to point to the WEBGUI Rogue AP information URL.
                 wlsxTrapInterferingAPInfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.58 displaystring no-access
This object is used to point to the WEBGUI Rogue interfering AP information URL.
                 wlsxTrapPortNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.59 integer32 no-access
This object is used in the traps to indicate the port number.
                 wlsxTrapTime 1.3.6.1.4.1.14823.2.3.3.1.200.1.60 dateandtime no-access
This object is used in all the enterprise traps to indicate the the time when the trap is generated on the controller.
                 wlsxTrapHostIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.61 ipaddress no-access
This object represents the Trap host.
                 wlsxTrapHostPort 1.3.6.1.4.1.14823.2.3.3.1.200.1.62 integer32 no-access
This object represents the Trap host port.
                 wlsxTrapConfigurationId 1.3.6.1.4.1.14823.2.3.3.1.200.1.63 integer32 no-access
This object represents the ID of the configuration, to be used in traps.
                 wlsxTrapCTSURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.64 displaystring no-access
This object represents the URL from which the transfer should happen.
                 wlsxTrapCTSTransferType 1.3.6.1.4.1.14823.2.3.3.1.200.1.65 displaystring no-access
This object represents the transfer type, upload or download.
                 wlsxTrapConfigurationState 1.3.6.1.4.1.14823.2.3.3.1.200.1.66 arubaconfigurationstate no-access
This object represents state of the configuration transfer.
                 wlsxTrapUpdateFailureReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.67 displaystring no-access
This object represents the reason for the update failure.
                 wlsxTrapUpdateFailedObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.68 displaystring no-access
This variable represents the AMAPI object which is the reason for the the update failure.
                 wlsxTrapTableEntryChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.69 arubaconfigurationchangetype no-access
This object represents type of the configuration change.
                 wlsxTrapGlobalConfigObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.70 displaystring no-access
This variable represents the AMAPI object corresponding to the global configuration change.
                 wlsxTrapTableGenNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.71 integer32 no-access
This object represents generation number of a table. Used in the MMS, to keep track of the table content changes.
                 wlsxTrapLicenseId 1.3.6.1.4.1.14823.2.3.3.1.200.1.72 integer32 no-access
This object is used in the traps to indicate the license ID.
                 wlsxTrapConfidenceLevel 1.3.6.1.4.1.14823.2.3.3.1.200.1.73 integer32 no-access
This object is used in the traps to indicate the Confidence Level as a percentage
                 wlsxTrapMissingLicenses 1.3.6.1.4.1.14823.2.3.3.1.200.1.74 displaystring no-access
This variable indicates any licenses that are not present during a configuration update
                 wlsxVoiceCurrentNumCdr 1.3.6.1.4.1.14823.2.3.3.1.200.1.75 integer32 no-access
This object represents the number of CDRs in buffer.
                 wlsxTrapTunnelId 1.3.6.1.4.1.14823.2.3.3.1.200.1.76 integer32 no-access
This Object represents the tunnel ID.
                 wlsxTrapTunnelStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.77 integer32 no-access
This Object represents the tunnel Status.
                 wlsxTrapTunnelUpReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.78 displaystring no-access
This Object represents the tunnel up reason.
                 wlsxTrapTunnelDownReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.79 displaystring no-access
This Object represents the tunnel down reason.
                 wlsxTrapApSerialNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.80 displaystring no-access
This object represents the AP Serial Number.
                 wlsxTrapTimeStr 1.3.6.1.4.1.14823.2.3.3.1.200.1.81 displaystring no-access
This object represents the Time in String format.
                 wlsxTrapMasterIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.82 ipaddress no-access
This object represents the master IP address.
                 wlsxTrapLocalIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.83 ipaddress no-access
This object represents the Local IP address.
                 wlsxTrapMasterName 1.3.6.1.4.1.14823.2.3.3.1.200.1.84 displaystring no-access
This object represents the master controller name.
                 wlsxTrapLocalName 1.3.6.1.4.1.14823.2.3.3.1.200.1.85 displaystring no-access
This object represents the local controller name.
                 wlsxTrapPrimaryControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.86 ipaddress no-access
This object represents the IP address of the AP's primary controller.
                 wlsxTrapBackupControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.87 ipaddress no-access
This object represents the IP address of the AP's backup controller.
                 wlsxTrapSpoofedFrameType 1.3.6.1.4.1.14823.2.3.3.1.200.1.88 displaystring no-access
This object is used in the traps to indicate the Spoofed Frame Type
                 wlsxTrapAssociationType 1.3.6.1.4.1.14823.2.3.3.1.200.1.89 displaystring no-access
This object is used in the traps to indicate the type of association
                 wlsxTrapDeviceIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.90 ipaddress no-access
This object represents the IP address of a device seen by an AP.
                 wlsxTrapDeviceMac 1.3.6.1.4.1.14823.2.3.3.1.200.1.91 macaddress no-access
This object represents the MAC address of a device seen by an AP.
                 wlsxTrapVcIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.92 ipaddress no-access
This object represents the Ip Address of a Voice client.
                 wlsxTrapVcMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.93 macaddress no-access
This object represents the MAC address of a Voice client.
                 wlsxTrapAPName 1.3.6.1.4.1.14823.2.3.3.1.200.1.94 displaystring no-access
This object is used in the traps to indicate the Name of the AP.
                 wlsxTrapApMode 1.3.6.1.4.1.14823.2.3.3.1.200.1.95 integer32 no-access
This Object represents the AP Mode.
                 wlsxTrapAPPrevChannel 1.3.6.1.4.1.14823.2.3.3.1.200.1.96 integer32 no-access
This object is used in the traps to indicate the Previous Channel.
                 wlsxTrapAPPrevChannelSec 1.3.6.1.4.1.14823.2.3.3.1.200.1.97 arubahtextchannel no-access
This object is used in the traps to indicate the Previous Secondary Channel.
                 wlsxTrapAPPrevTxPower 1.3.6.1.4.1.14823.2.3.3.1.200.1.98 integer32 no-access
This object is used in the traps to indicate previous AP Transmit Power.
                 wlsxTrapAPCurMode 1.3.6.1.4.1.14823.2.3.3.1.200.1.99 arubaaccesspointmode no-access
This Object represents the APs Current Mode.
                 wlsxTrapAPPrevMode 1.3.6.1.4.1.14823.2.3.3.1.200.1.100 arubaaccesspointmode no-access
This Object represents the APs Previous Mode.
                 wlsxTrapAPARMChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.101 arubaarmchangereason no-access
This Object represents the APs Previous Mode.
                 wlsxTrapAPChannelSec 1.3.6.1.4.1.14823.2.3.3.1.200.1.102 arubahtextchannel no-access
This object is used in the traps to indicate the Current Secondary Channel.
                 wlsxTrapUserAttributeChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.103 arubaconfigurationchangetype no-access
This object represents type of the configuration change.
                 wlsxTrapApControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.104 ipaddress no-access
IP address of the controller to which the AP is (or was most recently) registered.
                 wlsxTrapApMasterStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.105 arubaapmasterstatus no-access
Status of the AP as seen by the master when the status changes.
                 wlsxTrapCaName 1.3.6.1.4.1.14823.2.3.3.1.200.1.106 displaystring no-access
This object is used in the traps to indicate the name of the trustpoint.
                 wlsxTrapCrlName 1.3.6.1.4.1.14823.2.3.3.1.200.1.107 displaystring no-access
This object is used in the traps to indicate the name of the crl.
                 wlsxTrapCount 1.3.6.1.4.1.14823.2.3.3.1.200.1.108 integer32 no-access
This object represents the number of occurrence of this trap.
                 wlsxTrapAPPreviousUplinkType 1.3.6.1.4.1.14823.2.3.3.1.200.1.130 arubaapuplinktype no-access
This object specifies the up link type for an AP.
                 wlsxTrapAPPreviousUplinkActiveTime 1.3.6.1.4.1.14823.2.3.3.1.200.1.131 timeticks no-access
This object specifies the up link type for an AP.
                 wlsxTrapAPActiveUplinkType 1.3.6.1.4.1.14823.2.3.3.1.200.1.132 arubaapuplinktype no-access
This object specifies the up link type for an AP.
                 wlsxTrapAPUplinkChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.133 arubaapuplinkchangereason no-access
This object specifies the up link change reason.
                 wlsxTrapAPManagedModeConfigFailure 1.3.6.1.4.1.14823.2.3.3.1.200.1.138 displaystring no-access
This object indicates the error for the failure of config apply on IAP.
                 wlsxTrapAuthServerAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.139 ipaddress no-access
This object is used in the traps to indicate the Authentication Server IP used for Authentication.
                 wlsxTrapPortalServerName 1.3.6.1.4.1.14823.2.3.3.1.200.1.140 displaystring no-access
This object is used in the traps to indicate the Captive Portal Server used for Authentication.
                 wlsxTrapPortalServerAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.141 displaystring no-access
This object is used in the traps to indicate the Captive Portal Server IP or host name used for Authentication.
                 wlsxTrapPortalServerDownReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.142 arubaportalserverdownreason no-access
This object specifies the captive portal server down reason.
             aiTrapDefinitionsGroup 1.3.6.1.4.1.14823.2.3.3.1.200.2
                 wlsxNodeRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1003
This trap indicates that a node is exceeding the threshold set for the frame type.
                 wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014
This trap indicates that a new user was created.
                 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.1015
This trap indicates that a user was deleted.
                 wlsxNUserEntryAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1016
This trap indicates that a user is Authenticated.
                 wlsxNUserEntryDeAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1017
This trap indicates that a user is Deauthenticated.
                 wlsxNUserAuthenticationFailed 1.3.6.1.4.1.14823.2.3.3.1.200.2.1018
This trap indicates that a user authentication has failed.
                 wlsxNAuthServerReqTimedOut 1.3.6.1.4.1.14823.2.3.3.1.200.2.1019
This trap indicates that the authentication server request timed out.
                 wlsxNAuthServerTimedOut 1.3.6.1.4.1.14823.2.3.3.1.200.2.1020
This trap indicates that the authentication server timed out.
                 wlsxNAuthServerIsUp 1.3.6.1.4.1.14823.2.3.3.1.200.2.1021
This trap indicates that an authentication server is up.
                 wlsxNAccessPointIsUp 1.3.6.1.4.1.14823.2.3.3.1.200.2.1040
A Trap which indicates that an access point up.
                 wlsxNAccessPointIsDown 1.3.6.1.4.1.14823.2.3.3.1.200.2.1041
A Trap which indicates that an access point down.
                 wlsxNChannelChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1043
This trap indicates that an access point at Location wlsxTrapAPLocation has changed the channel.
                 wlsxNStationAddedToBlackList 1.3.6.1.4.1.14823.2.3.3.1.200.2.1044
This trap indicates that the station is black listed.
                 wlsxNStationRemovedFromBlackList 1.3.6.1.4.1.14823.2.3.3.1.200.2.1045
This trap indicates that the station is removed from the black list.
                 wlsxNRadioAttributesChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1049
A Trap which indicates changes in the Radio attributes of an access point.
                 wlsxUnsecureAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1053
This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address.
                 wlsxUnsecureAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1054
This trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network.
                 wlsxStaImpersonation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1055
This trap indicates that an AM detected Station Impersonation.
                 wlsxReservedChannelViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1056
This trap indicates that an AM detected an access point which is violating the Reserved Channel configuration.
                 wlsxValidSSIDViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1057
This trap indicates that an AP has detected an access point is violating Valid SSID configuration by using an SSID that is reserved for use by a valid AP only.
                 wlsxChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1058
This trap indicates that an AP detected an access point that has a channel misconfiguration because it is using a channel that is not valid.
                 wlsxOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1059
This trap indicates that an AP detected an access point that has an OUI misconfiguration because it is using an OUI that is not valid.
                 wlsxSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1060
This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using an SSID that is not valid.
                 wlsxShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1061
This trap indicates that an access point has bad Short preamble configuration.
                 wlsxWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1062
This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA.
                 wlsxAdhocNetworkDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1063
This trap indicates that an AM has detected an Ad hoc network.
                 wlsxAdhocNetworkRemoved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1064
This trap indicates that a previously detected Ad hoc Network is no longer present in the network.
                 wlsxStaPolicyViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1065
This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy. For more info check: http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0019
                 wlsxRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1066
This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets.
                 wlsxWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1067
This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector. For more info check: http://www.wve.org/entries/show/WVE-2005-0021
                 wlsxChannelInterferenceDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1068
This trap indicates that an AP has detected channel interference.
                 wlsxChannelInterferenceCleared 1.3.6.1.4.1.14823.2.3.3.1.200.2.1069
This trap indicates that a previously detected channel interference is no longer present.
                 wlsxAPInterferenceDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1070
This trap indicates that an AP has detected interference for an access point.
                 wlsxAPInterferenceCleared 1.3.6.1.4.1.14823.2.3.3.1.200.2.1071
This trap indicates that the previously detected interference for an access point is no longer present.
                 wlsxStaInterferenceDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1072
This trap indicates that an AP has detected interference for a station.
                 wlsxStaInterferenceCleared 1.3.6.1.4.1.14823.2.3.3.1.200.2.1073
This trap indicates that the previously detected interference for a station is no longer present.
                 wlsxFrameRetryRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1074
This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
                 wlsxFrameReceiveErrorRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1075
This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate.
                 wlsxFrameFragmentationRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1076
This trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate.
                 wlsxFrameBandWidthRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1077
This trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate.
                 wlsxFrameLowSpeedRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1078
This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate.
                 wlsxFrameNonUnicastRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1079
This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate.
                 wlsxLoadbalancingEnabled 1.3.6.1.4.1.14823.2.3.3.1.200.2.1080
This trap indicates that an AM is reporting that an AP has enabled Load balancing.
                 wlsxLoadbalancingDisabled 1.3.6.1.4.1.14823.2.3.3.1.200.2.1081
This trap indicates that an AM is reporting that an AP has enabled Load balancing.
                 wlsxChannelFrameRetryRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1082
This trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel.
                 wlsxChannelFrameFragmentationRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1083
This trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel.
                 wlsxChannelFrameErrorRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1084
This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel.
                 wlsxSignatureMatchAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1085
This trap indicates that an AP detected a signature match in a frame from an access point.
                 wlsxSignatureMatchSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1086
This trap indicates that an AP detected a signature match in a frame from a Station.
                 wlsxChannelRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1087
This trap indicates that an AP detected frames on a channel which exceed the configured IDS rate threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxNodeRateAnomalyAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1088
This trap indicates that an AP detected frames transmitted or received by an access point, which exceed the configured IDS rate threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxNodeRateAnomalySta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1089
This trap indicates that an AP detected frames transmitted or received by a node, which exceed the configured IDS rate threshold.
                 wlsxEAPRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1090
This trap indicates that the rate of EAP Handshake packets received by an AP has exceeded the configured IDS EAP Handshake rate threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0049
                 wlsxSignalAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1091
This trap indicates that an AM detected a Signal Anomaly.
                 wlsxSequenceNumberAnomalyAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1092
This trap indicates that an AM received packets from an AP which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. For more info check: http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxSequenceNumberAnomalySta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1093
This trap indicates that an AM received packets from a Node which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. For more info check: http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0047 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxDisconnectStationAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1094
This trap indicates that an AM detected a station Disconnect attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxApFloodAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1095
This trap indicates that the number of potential fake APs detected by an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands. For more info check: http://www.wve.org/entries/show/WVE-2005-0056
                 wlsxAdhocNetwork 1.3.6.1.4.1.14823.2.3.3.1.200.2.1096
This trap indicates that an AM detected an Ad hoc Network. An Station is connected to an ad hoc AP.
                 wlsxWirelessBridge 1.3.6.1.4.1.14823.2.3.3.1.200.2.1097
This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses.
                 wlsxInvalidMacOUIAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1098
This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
                 wlsxInvalidMacOUISta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1099
This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
                 wlsxWEPMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1100
This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled.
                 wlsxStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1101
This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets.
                 wlsxStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1102
This trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector.
                 wlsxStaAssociatedToUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1103
This trap indicates that an AM detected a client associated with a Rogue access point.
                 wlsxStaUnAssociatedFromUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1104
This trap indicates that a previously detected rogue access point association is no longer present.
                 wlsxAdhocNetworkBridgeDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1105
This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network
                 wlsxInterferingApDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1106
This trap indicates that an AP detected an access point classified as Interfering. The access point is declared Interfering because it is neither authorized or classified as Rogue.
                 wlsxColdStart 1.3.6.1.4.1.14823.2.3.3.1.200.2.1111
An enterprise version of cold start trap, which contains the controller time stamp.
                 wlsxWarmStart 1.3.6.1.4.1.14823.2.3.3.1.200.2.1112
An enterprise version of warm start trap, which contains the controller time stamp.
                 wlsxAPImpersonation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1113
This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold. The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
                 wlsxNAuthServerIsDown 1.3.6.1.4.1.14823.2.3.3.1.200.2.1115
This trap indicates that an authentication server is down.
                 wlsxWindowsBridgeDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1129
This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network
                 wlsxSignAPNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1134
This trap indicates that an AP detected a signature match for Netstumbler from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0025
                 wlsxSignStaNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1135
This trap indicates that an AP detected a signature match for Netstumbler from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0025
                 wlsxSignAPAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1136
This trap indicates that an AP detected a signature match for ASLEAP from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0027
                 wlsxSignStaAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1137
This trap indicates that an AP detected a signature match for ASLEAP from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0027
                 wlsxSignAPAirjack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1138
This trap indicates that an AP detected a signature match for AirJack from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0018
                 wlsxSignStaAirjack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1139
This trap indicates that an AP detected a signature match for AirJack from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0018
                 wlsxSignAPNullProbeResp 1.3.6.1.4.1.14823.2.3.3.1.200.2.1140
This trap indicates that an AP detected a signature match for Null-Probe-Response from an access point. For more info check: http://www.wve.org/entries/show/WVE-2006-0064
                 wlsxSignStaNullProbeResp 1.3.6.1.4.1.14823.2.3.3.1.200.2.1141
This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station. For more info check: http://www.wve.org/entries/show/WVE-2006-0064
                 wlsxSignAPDeauthBcast 1.3.6.1.4.1.14823.2.3.3.1.200.2.1142
This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045
                 wlsxSignStaDeauthBcast 1.3.6.1.4.1.14823.2.3.3.1.200.2.1143
This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045
                 wlsxWindowsBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1144
This trap indicates that an AP is detecting an access point that is bridging from a wireless network to a wired network.
                 wlsxWindowsBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1145
This trap indicates that an AP is detecting a station that is bridging from a wireless network to a wired network.
                 wlsxAdhocNetworkBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1146
This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network
                 wlsxAdhocNetworkBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1147
This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network
                 wlsxDisconnectStationAttackAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1148
This trap indicates that an AM detected a station disconnect attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxDisconnectStationAttackSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1149
This trap indicates that an AM detected a station Disconnect attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxSuspectUnsecureAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1150
This trap indicates that an access point, classified as Suspected Rogue, has been detected by a Controller. The AP is suspected to be rogue, with the supplied confidence level, because it was matched to the wired MAC address.
                 wlsxSuspectUnsecureAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1151
This trap indicates that a previously detected access point, classified Suspected Rogue, is either no longer present in the network or has changed its state.
                 wlsxHtGreenfieldSupported 1.3.6.1.4.1.14823.2.3.3.1.200.2.1157
This trap indicates that an AP detected an access point that supports HT Greenfield mode. For more info check: http://www.wve.org/entries/show/WVE-2008-0005
                 wlsxHT40MHzIntoleranceAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1158
This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. For more info check: http://www.wve.org/entries/show/WVE-2008-0004
                 wlsxHT40MHzIntoleranceSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1159
This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station. For more info check: http://www.wve.org/entries/show/WVE-2008-0004
                 wlsxNAuthServerAllInService 1.3.6.1.4.1.14823.2.3.3.1.200.2.1160
This trap indicates that all authentication servers is a server group are brought back in service.
                 wlsxNAdhocNetwork 1.3.6.1.4.1.14823.2.3.3.1.200.2.1161
This trap indicates that an AP detected an ad hoc network where a station is connected to an ad hoc access point.
                 wlsxNAdhocNetworkBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1162
This trap indicates that an AP detected an ad hoc network that is bridging to a wired network.
                 wlsxNAdhocNetworkBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1163
This trap indicates that an AP detected an ad hoc network that is bridging to a wired network.
                 wlsxClientFloodAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1170
This trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. For more info check: http://www.wve.org/entries/show/WVE-2005-0056
                 wlsxValidClientNotUsingEncryption 1.3.6.1.4.1.14823.2.3.3.1.200.2.1171
This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point.
                 wlsxAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1172
This trap indicates that an AP detected an ad hoc network using a valid/protected SSID. For more info check: http://www.wve.org/entries/show/WVE-2005-0008
                 wlsxAPSpoofingDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1173
This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing. For more info check: http://www.wve.org/entries/show/WVE-2005-0019
                 wlsxClientAssociatingOnWrongChannel 1.3.6.1.4.1.14823.2.3.3.1.200.2.1174
This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel. This can be a sign that the BSSID is being spoofed in order to fool the client into thinking the AP is operating on another channel.
                 wlsxNDisconnectStationAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1175
This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets received by that client exceeds the configured threshold. For more info check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048
                 wlsxNStaUnAssociatedFromUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1176
This trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association.
                 wlsxOmertaAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1177
This trap indicates that an AP detected an Omerta attack. For more info check: http://www.wve.org/entries/show/WVE-2005-0053
                 wlsxTKIPReplayAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1178
This trap indicates that an AP detected a TKIP replay attack. If successful this could be the precursor to more advanced attacks. For more info check: http://www.wve.org/entries/show/WVE-2008-0013
                 wlsxChopChopAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1179
This trap indicates that an AP detected a ChopChop attack. For more info check: http://www.wve.org/entries/show/WVE-2006-0038
                 wlsxFataJackAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1180
This trap indicates that an AP detected a FATA-Jack attack. For more info check: http://www.wve.org/entries/show/WVE-2006-0057
                 wlsxInvalidAddressCombination 1.3.6.1.4.1.14823.2.3.3.1.200.2.1181
This trap indicates that an AP detected an invalid source and destination combination. For more info check: http://www.wve.org/entries/show/WVE-2008-0011
                 wlsxValidClientMisassociation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1182
This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP.
                 wlsxMalformedHTIEDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1183
This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack.
                 wlsxMalformedAssocReqDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1184
This trap indicates that an AP detected a malformed association request with a NULL SSID. For more info check: http://www.wve.org/entries/show/WVE-2008-0010
                 wlsxOverflowIEDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1185
This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. For more info check: http://www.wve.org/entries/show/WVE-2008-0008
                 wlsxOverflowEAPOLKeyDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1186
This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. For more info check: http://www.wve.org/entries/show/WVE-2008-0009
                 wlsxMalformedFrameLargeDurationDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1187
This trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting. For more info check: http://www.wve.org/entries/show/WVE-2005-0051
                 wlsxMalformedFrameWrongChannelDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1188
This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP. For more info check: http://www.wve.org/entries/show/WVE-2006-0050
                 wlsxMalformedAuthFrame 1.3.6.1.4.1.14823.2.3.3.1.200.2.1189
This trap indicates that an AP detected an authentication frame with either a bad algorithm (similar to Fata-Jack) or a bad transaction. For more info check: http://www.wve.org/entries/show/WVE-2006-0057
                 wlsxCTSRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1190
This trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold.
                 wlsxRTSRateAnomaly 1.3.6.1.4.1.14823.2.3.3.1.200.2.1191
This trap indicates that the rate of RTS packets received by an AP exceeds the configured IDS threshold.
                 wlsxNRogueAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1192
This trap indicates that an unauthorized access point is connected to the wired network. The access point is classified as Rogue by the system.
                 wlsxNRogueAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1193
This trap indicates that a previously detected access point, classified as Rogue, is either no longer present in the network or it changed its state.
                 wlsxNeighborAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1194
This trap indicates that an access point has been classified as a Neighbor by the system.
                 wlsxNInterferingAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1195
This trap indicates that an access point has been classified as Interfering by the system. The access point is declared Interfering because it is not authorized, nor has it been classified as a Rogue.
                 wlsxNSuspectRogueAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1196
This trap indicates that an access point, classified as Suspected Rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level.
                 wlsxNSuspectRogueAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1197
This trap indicates that a previously detected access point, classified as Suspected Rogue, is either no longer present in the network or has changed its state.
                 wlsxBlockAckAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1198
This trap indicates that an attempt has been made to deny service to the source address by spoofing a block ACK add request that sets a sequence number window outside the currently used window. For more info check: http://www.wve.org/entries/show/WVE-2008-0006
                 wlsxHotspotterAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1199
This trap indicates that a new AP has appeared immediately following a client probe request. This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake hotspot or other wireless network. For more info check: http://www.wve.org/entries/show/WVE-2005-0054
                 wlsxNSignatureMatch 1.3.6.1.4.1.14823.2.3.3.1.200.2.1200
This trap indicates that an AP detected a signature match in a frame.
                 wlsxNSignatureMatchNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1201
This trap indicates that an AP detected a signature match for Netstumbler in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0025
                 wlsxNSignatureMatchAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1202
This trap indicates that an AP detected a signature match for ASLEAP in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0027
                 wlsxNSignatureMatchAirjack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1203
This trap indicates that an AP detected a signature match for Airjack in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0018
                 wlsxNSignatureMatchNullProbeResp 1.3.6.1.4.1.14823.2.3.3.1.200.2.1204
This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame. For more info check: http://www.wve.org/entries/show/WVE-2006-0064
                 wlsxNSignatureMatchDeauthBcast 1.3.6.1.4.1.14823.2.3.3.1.200.2.1205
This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045
                 wlsxNSignatureMatchDisassocBcast 1.3.6.1.4.1.14823.2.3.3.1.200.2.1206
This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. For more info check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0046
                 wlsxNSignatureMatchWellenreiter 1.3.6.1.4.1.14823.2.3.3.1.200.2.1207
This trap indicates that an AP detected a signature match for Wellenreiter in a frame. For more info check: http://www.wve.org/entries/show/WVE-2006-0058
                 wlsxAPDeauthContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1208
This trap indicates that an AP has attempted to contain an access point by disconnecting its client.
                 wlsxClientDeauthContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1209
This trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with.
                 wlsxAPWiredContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1210
This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
                 wlsxClientWiredContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1211
This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
                 wlsxAPTaggedWiredContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1212
This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
                 wlsxClientTaggedWiredContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1213
This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
                 wlsxTarpitContainment 1.3.6.1.4.1.14823.2.3.3.1.200.2.1214
This trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit.
                 wlsxAPChannelChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1216
This trap indicates that an AP changed its channel.
                 wlsxAPPowerChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1217
This trap indicates that an AP changed its transmit power level.
                 wlsxAPModeChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1218
This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
                 wlsxUserEntryAttributesChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1219
This trap indicates that the user entry attributes have changed.
                 wlsxPowerSaveDosAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1220
This trap indicates that an AP detected a Power Save DoS attack.
                 wlsxNAPMasterStatusChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1221
This trap indicates that the status of the AP as seen by the master controller has changed.
                 wlsxNAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1222
This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID. For more info check: http://www.wve.org/entries/show/WVE-2005-0008
                 wlsxMgmtUserAuthenticationFailed 1.3.6.1.4.1.14823.2.3.3.1.200.2.1224
This trap indicates that a management user authentication has failed.
                 wlsxAPActiveUplinkChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1252
When the active uplink of an AP changes, a notification is sent to the Management Entity with the new uplink type
                 wlsxAPManagedModeConfigFailureTrap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1255
Indicated failure in applying config.
                 wlsxNAuthServerAcctTimedOut 1.3.6.1.4.1.14823.2.3.3.1.200.2.1256
This trap indicates that the authentication server accounting timed out.
                 wlsxPortalServerDown 1.3.6.1.4.1.14823.2.3.3.1.200.2.1259
This trap indicates that the portal server is down.
                 wlsxPortalServerUp 1.3.6.1.4.1.14823.2.3.3.1.200.2.1260
This trap indicates that the portal server is up.
                 wlsxIAPVoiceClientLocationUpdate 1.3.6.1.4.1.14823.2.3.3.1.200.2.1262
The trap represents a IAP voice client location update.