AGENT-GENERAL-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: AGENT-GENERAL-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Q-BRIDGE-MIB, INET-ADDRESS-MIB, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 agentGeneralMgmt 1.3.6.1.4.1.171.12.1
The structure of general management information for enterprise.
     agentBasicInfo 1.3.6.1.4.1.171.12.1.1
         agentMgmtProtocolCapability 1.3.6.1.4.1.171.12.1.1.1 integer read-only
The network management protocol(s) supported by this agent. Enumeration: 'snmp-ip-ipx': 4, 'other': 1, 'snmp-ip': 2, 'snmp-ipx': 3.
         agentMibCapabilityTable 1.3.6.1.4.1.171.12.1.1.2 no-access
A list of MIB capability entries supported by this agent.
             agentMibCapabilityEntry 1.3.6.1.4.1.171.12.1.1.2.1 no-access
A MIB capability entry containing objects that describe a particular MIB supported by this agent.
                 agentMibCapabilityIndex 1.3.6.1.4.1.171.12.1.1.2.1.1 integer32 read-only
A list of Agent MIB Capability Description entries.
                 agentMibCapabilityDescr 1.3.6.1.4.1.171.12.1.1.2.1.2 displaystring read-only
The name of the MIB supported by the agent.
                 agentMibCapabilityVersion 1.3.6.1.4.1.171.12.1.1.2.1.3 integer32 read-only
The version of the MIB specified in this entry.
                 agentMibCapabilityType 1.3.6.1.4.1.171.12.1.1.2.1.4 integer read-only
The type of MIB specified in this entry. Enumeration: 'other': 1, 'proprietary': 3, 'experiment': 4, 'standard': 2.
         agentStatusConsoleInUse 1.3.6.1.4.1.171.12.1.1.3 integer read-only
This indicates whether the console is currently in use. Enumeration: 'other': 1, 'in-use': 2, 'not-in-use': 3.
         agentStatusSaveCfg 1.3.6.1.4.1.171.12.1.1.4 integer read-only
This indicates the status of the device configuration. other (1) - This entry is currently in use but the conditions under which it will remain so are determined by each of the following values. proceeding (2) - The device configuration is currently being saved into NV-RAM. completed (3) - All of the device configuration parameters have been saved into NV-RAM. failed (4) - The process to save the device configuration has failed. Enumeration: 'failed': 4, 'completed': 3, 'other': 1, 'proceeding': 2.
         agentStatusFileTransfer 1.3.6.1.4.1.171.12.1.1.5 integer read-only
The status of the firmware download control. If the value is stated as 'other', the firmware has not been updated since the device was started. Enumeration: 'invalid-file': 3, 'in-process': 2, 'complete': 7, 'not-format': 9, 'violation': 4, 'memory-full': 10, 'other': 1, 'file-not-found': 5, 'time-out': 8, 'disk-full': 6.
         agentCPUutilization 1.3.6.1.4.1.171.12.1.1.6
             agentCPUutilizationIn5sec 1.3.6.1.4.1.171.12.1.1.6.1 integer32 read-only
The time scale is set at 5 second intervals. The value will be between 0% (idle) and 100% (very busy).
             agentCPUutilizationIn1min 1.3.6.1.4.1.171.12.1.1.6.2 integer32 read-only
The time scale is set at 1 minute intervals. The value will be between 0% (idle) and 100% (very busy).
             agentCPUutilizationIn5min 1.3.6.1.4.1.171.12.1.1.6.3 integer32 read-only
The time scale is set at 5 minute intervals. The value will be between 0% (idle) and 100% (very busy).
         agentDualImageStatus 1.3.6.1.4.1.171.12.1.1.7 integer read-only
The dual image status. Enumeration: 'supported': 1, 'not-supported': 0.
         agentPORTutilizationTable 1.3.6.1.4.1.171.12.1.1.8 no-access
This table specifies the current utilization of a specified port.
             agentPORTutilizationEntry 1.3.6.1.4.1.171.12.1.1.8.1 no-access
A list of information regarding the port utilization function.
                 agentPORTutilizationProtIndex 1.3.6.1.4.1.171.12.1.1.8.1.1 integer read-only
This object indicates the module's port number.
                 agentPORTutilizationTX 1.3.6.1.4.1.171.12.1.1.8.1.2 integer read-only
The current rate of transmitted frames on the specified port.
                 agentPORTutilizationRX 1.3.6.1.4.1.171.12.1.1.8.1.3 integer read-only
The current rate of received frames on the specified port.
                 agentPORTutilizationUtil 1.3.6.1.4.1.171.12.1.1.8.1.4 integer read-only
The current percentages regarding port statistics.
         agentDRAMutilizationTable 1.3.6.1.4.1.171.12.1.1.9 no-access
Information about DRAM memory.
             agentDRAMutilizationEntry 1.3.6.1.4.1.171.12.1.1.9.1 no-access
A list of information about DRAM memory.
                 agentDRAMutilizationUnitID 1.3.6.1.4.1.171.12.1.1.9.1.1 integer read-only
Specifies the unit ID. If the ID equals zero, it means the current device.
                 agentDRAMutilizationTotalDRAM 1.3.6.1.4.1.171.12.1.1.9.1.2 integer read-only
The size of total DRAM memory.
                 agentDRAMutilizationUsedDRAM 1.3.6.1.4.1.171.12.1.1.9.1.3 integer read-only
The size of used DRAM memory.
                 agentDRAMutilization 1.3.6.1.4.1.171.12.1.1.9.1.4 integer read-only
The percentage of used DRAM memory of the total DRAM memory available. The value will be between 0% (idle) and 100% (very busy).
         agentFLASHutilizationTable 1.3.6.1.4.1.171.12.1.1.10 no-access
Information about the flash memory.
               agentFLASHutilizationEntry 1.3.6.1.4.1.171.12.1.1.10.1 no-access
Information about the flash memory.
                   agentFLASHutilizationUnitID 1.3.6.1.4.1.171.12.1.1.10.1.1 integer read-only
Specifies the unit ID. If the ID equals zero, it means the current device.
                   agentFLASHutilizationTotalFLASH 1.3.6.1.4.1.171.12.1.1.10.1.2 integer read-only
The total size of flash memory.
                   agentFLASHutilizationUsedFLASH 1.3.6.1.4.1.171.12.1.1.10.1.3 integer read-only
The size of the used flash memory.
                   agentFLASHutilization 1.3.6.1.4.1.171.12.1.1.10.1.4 integer read-only
The percentage of used flash memory in total flash memory. The value will be between 0% (idle) and 100% (very busy).
         agentStatusReset 1.3.6.1.4.1.171.12.1.1.11 integer read-only
This indicates the status of 'agentReset'. Enumeration: 'failed': 3, 'completed': 2, 'proceeding': 1.
         agentSerialNumber 1.3.6.1.4.1.171.12.1.1.12 displaystring read-only
A text string containing the serial number of this device.
         agentFirmwareType 1.3.6.1.4.1.171.12.1.1.13 displaystring read-only
A text string containing the firmware type.
     agentBasicConfig 1.3.6.1.4.1.171.12.1.2
         agentBscSwFileTable 1.3.6.1.4.1.171.12.1.2.1 no-access
A list of MIB Basic Config entry support files updated by this agent.
             agentBscSwFileEntry 1.3.6.1.4.1.171.12.1.2.1.1 no-access
A basic configuration entry containing the objects that describe a particular MIB supported by this agent.
                 agentBscSwFileIndex 1.3.6.1.4.1.171.12.1.2.1.1.1 integer32 read-only
The table index for the file entry
                 agentBscSwFileDscr 1.3.6.1.4.1.171.12.1.2.1.1.2 displaystring read-write
The description of the software file purpose in this entry. Note: For systems that do not support a change to this object, setting a value for this object will cause the system to return bad-value error messages.
                 agentBscSwFileAddr 1.3.6.1.4.1.171.12.1.2.1.1.3 ipaddress read-write
The IP address where the file that needs to be downloaded is located, or the IP address where the file will be uploaded to.
                 agentBscSwFileTransferType 1.3.6.1.4.1.171.12.1.2.1.1.4 integer read-write
The channel through which the file will be downloaded or uploaded. Note: For systems that do not support all channels, setting a value to the unsupported channel will cause the system to return bad-value error messages. Enumeration: 'out-of-band-load': 3, 'other': 1, 'network-load': 2.
                 agentBscSwFile 1.3.6.1.4.1.171.12.1.2.1.1.5 displaystring read-write
The name of the file to be downloaded from, or uploaded to, the TFTP server.
                 agentBscSwFileLocateId 1.3.6.1.4.1.171.12.1.2.1.1.6 integer read-write
This object describes the type of file. runtime-code (1), log-file (2), cfg-file (3) Note: For systems that do not support changes to this object, setting a value for this object will cause the system to return bad-value error messages.
                 agentBscSwFileLoadType 1.3.6.1.4.1.171.12.1.2.1.1.7 integer read-write
This object provides the user with a choice of uploading or downloading the selected file. Note: For systems that do not support a change to this object, setting a value for this object will cause the system to return bad-value error messages. Enumeration: 'download': 3, 'other': 1, 'upload': 2.
                 agentBscSwFileCtrl 1.3.6.1.4.1.171.12.1.2.1.1.8 integer read-write
This object gives the user the option of downloading runtime software. This setting will take effect when the system restarts. See Note (1) below Note: For systems that do not support changes to this object, setting a value to this object will cause the system to return bad-value error messages. start - Activate firmware. delete (4) - Delete the firmware by indicated firmware ID. config-as-bootup (5) - Configured as bootup firmware by the indicated firmware(ID). apply (6) - Apply the configuration to be the active configuration by the indicated config ID. Enumeration: 'config-as-bootup': 5, 'start': 3, 'inactive': 2, 'apply': 6, 'other': 1, 'delete': 4.
                 agentBscSwFileBIncrement 1.3.6.1.4.1.171.12.1.2.1.1.9 truthvalue read-write
This object indicates whether the previous configuration will remain valid or not after downloading the configuration file. True: Keep valid False: Erase.
                 agentBscSwFileCtrlID 1.3.6.1.4.1.171.12.1.2.1.1.10 integer read-write
The section ID of the firmware image or configuration file. A value of 0 indicates the boot-up firmware image or configuration file.
                 agentBscSwFileCtrlUnitID 1.3.6.1.4.1.171.12.1.2.1.1.11 unitlist read-write
Specifies which unit of the switch stack the firmware image will be downloaded from. One or more units can be set in this list. Each bit from the left to the right represents the switch from unit ID 1 to unit ID 12. A null entry in this field denotes all switches in the switch stack.
                 agentBscSwFileIPv6Addr 1.3.6.1.4.1.171.12.1.2.1.1.12 ipv6address read-write
The IPv6 address where the file will be downloaded from or uploaded to.
                 agentBscSwFileBootUpImage 1.3.6.1.4.1.171.12.1.2.1.1.13 truthvalue read-write
The result of the download will depend on whether the boot_up option is specified. Case 1: In the case where the master unit provides the file system and the slave unit does not provide the file system, when boot_up is specified, the file will be downloaded to the boot_up image on the slave. If boot_up is not specified, then the file will not be downloaded to this slave unit. Case 2: In the case where the master unit does not provide the file system and the slave unit provides the file system, when boot_up is specified, the file will be downloaded to the boot_up image on the slave unit. If boot_up is not specified, the file will not be downloaded to this slave unit. Case 3: In the case where the master unit and the slave unit both support or do not support the file system, the file will be downloaded to the specified file on the slave unit. If boot_up is specified, the downloaded file will be assigned as the boot_up image. True: boot_up option is specified. False: boot_up option is not specified.
                 agentBscSwFileForceAgree 1.3.6.1.4.1.171.12.1.2.1.1.14 truthvalue read-write
When the force_agree option is specified, the reboot command will be executed immediately, without any further confirmation from the user. True: force_agree option is specified. False: force_agree option is not specified.
                 agentBscSwFileInterfaceName 1.3.6.1.4.1.171.12.1.2.1.1.15 displaystring read-write
This node is used to specify the interface name when the agentBscSwFileIPv6Addr is the link local address.
                 agentBscSwFileServerDomainName 1.3.6.1.4.1.171.12.1.2.1.1.16 displaystring read-write
This object indicates the domain name of the TFTP server.
         agentFileTransfer 1.3.6.1.4.1.171.12.1.2.2 integer read-write
This object will execute the download or upload action. If start (2) is chosen, it will begin to download/upload and no reset will follow. If start-and-reset (3) is chosen, then the reset will be activated after completing the download or upload. No action if noaction (4) is chosen. Note: Because these functions will be limited by the support for the system in question, some of the selected items will be invalid. When the user selects an invalid entry, the system will respond with a bad-value status. Enumeration: 'start': 2, 'other': 1, 'noaction': 4, 'start-and-reset': 3.
         agentSystemReset 1.3.6.1.4.1.171.12.1.2.3 integer read-write
This object indicates the agent system reset state. Setting this object to no-reset (4) has no effect. Setting this object to cold-start (2) or warm-start (3) will reset the agent. The agent always returns to no-reset (4) when this object is read. This object is replaced by 'agentReset'. Enumeration: 'other': 1, 'no-reset': 4, 'warm-start': 3, 'cold-start': 2.
         agentRs232PortConfig 1.3.6.1.4.1.171.12.1.2.4 integer read-write
This object indicates the RS-232C mode once the device has restarted. Enumeration: 'notAvail': 4, 'other': 1, 'console': 2, 'out-of-band': 3.
         agentOutOfBandBaudRateConfig 1.3.6.1.4.1.171.12.1.2.5 integer read-write
This object allows the user to specify an out-of-band baud rate, which will take effect upon system restart. Note: Because these functions will be limited by the support for the system in question, some of the selected items will be invalid. When the user selects an invalid entry, the system will respond with a bad-value error message. Enumeration: 'baudRate-9600': 3, 'baudRate-2400': 2, 'other': 1, 'baudRate-115200': 6, 'baudRate-38400': 5, 'baudRate-19200': 4.
         agentSaveCfg 1.3.6.1.4.1.171.12.1.2.6 integer read-write
This object indicates the type of save command to be executed, when saving to NV-RAM. other (1) - None of the following. cfg-id1 (2) - Save configuration ID1. cfg-id2 (3)- Save configuration ID2. log (4) - Save log. all (5) - Save both (active configuration and log). Enumeration: 'cfg-id2': 3, 'cfg-id1': 2, 'other': 1, 'log': 4, 'all': 5.
         swMultiImageInfoTable 1.3.6.1.4.1.171.12.1.2.7 no-access
             swMultiImageInfoEntry 1.3.6.1.4.1.171.12.1.2.7.1 no-access
A list of information about multiple image management.
                 swMultiImageInfoID 1.3.6.1.4.1.171.12.1.2.7.1.1 integer read-only
The stacking section ID of the firmware image. The stacking section ID = 256 * Unit ID + Image File ID.
                 swMultiImageVersion 1.3.6.1.4.1.171.12.1.2.7.1.2 displaystring read-only
The recorded downloaded firmware version.
                 swMultiImageSize 1.3.6.1.4.1.171.12.1.2.7.1.3 integer32 read-only
The recorded downloaded firmware size.
                 swMultiImageUpdateTime 1.3.6.1.4.1.171.12.1.2.7.1.4 displaystring read-only
The recorded firmware update time.
                 swMultiImageFrom 1.3.6.1.4.1.171.12.1.2.7.1.5 displaystring read-only
The recorded IP address of the TFTP server
                 swMultiImageSendUser 1.3.6.1.4.1.171.12.1.2.7.1.6 displaystring read-only
The record of the user who downloaded the firmware.
                 swMultiImageFileName 1.3.6.1.4.1.171.12.1.2.7.1.7 displaystring read-only
When the system is set to boot from SD card, this object will display the recorded path name of the boot firmware file.
         agentMultiCfgMgmt 1.3.6.1.4.1.171.12.1.2.8
             swMultiCfgInfoTable 1.3.6.1.4.1.171.12.1.2.8.1 no-access
                 swMultiCfgInfoEntry 1.3.6.1.4.1.171.12.1.2.8.1.1 no-access
A list of information about multiple configuration files.
                     swMultiCfgInfoID 1.3.6.1.4.1.171.12.1.2.8.1.1.1 integer read-only
The section ID of the configuration files.
                     swMultiCfgVersion 1.3.6.1.4.1.171.12.1.2.8.1.1.2 displaystring read-only
The recorded downloaded configuration version.
                     swMultiCfgSize 1.3.6.1.4.1.171.12.1.2.8.1.1.3 integer32 read-only
The recorded downloaded configuration size (in bytes).
                     swMultiCFgUpdateTime 1.3.6.1.4.1.171.12.1.2.8.1.1.4 displaystring read-only
The recorded configuration update time displayed in string format, i.e. yyyy/mon/dd hh:mm:ss.
                     swMultiCfgFrom 1.3.6.1.4.1.171.12.1.2.8.1.1.5 displaystring read-only
The recorded IP address of the TFTP server.
                     swMultiCfgSendUser 1.3.6.1.4.1.171.12.1.2.8.1.1.6 displaystring read-only
The record of the user who downloaded the configuration file
                     swMultiCfgFileName 1.3.6.1.4.1.171.12.1.2.8.1.1.7 displaystring read-only
When the system is set to boot from SD card, this object displays the recorded path name of the boot configuration file.
             swMultiCfgCurrentUsed 1.3.6.1.4.1.171.12.1.2.8.2 integer read-only
The indicated configuration file ID of the system currently in use.
             swMultiCfgBootUp 1.3.6.1.4.1.171.12.1.2.8.3 integer read-only
This object indicates the configuration file ID which will take effect upon the next reboot.
             swMultiCfgCtrlTable 1.3.6.1.4.1.171.12.1.2.8.4 no-access
                 swMultiCfgCtrlEntry 1.3.6.1.4.1.171.12.1.2.8.4.1 no-access
A list of information about multiple configuration management.
                     swMultiCfgCtrlID 1.3.6.1.4.1.171.12.1.2.8.4.1.1 integer read-only
The section ID of the configuration file. Enumeration: 'cfgId-1': 1, 'cfgId-2': 2.
                     swMultiCfgAction 1.3.6.1.4.1.171.12.1.2.8.4.1.2 integer read-write
save: Save configuration to active configuration ID when the parameter is omitted. active: Set any valid configuration as the active configuration. delete: Removes the configuration from the flash memory. This configuration cannot be the active or current configuration file. apply: Loads the indicated configuration file and applies it to the system. config-as-bootup-cfg: Configured as the boot-up configuration by the indicated configuration(ID). Enumeration: 'active': 1, 'apply': 3, 'none': 4, 'config-as-bootup-cfg': 5, 'delete': 2.
         systemSeverityControlMgmt 1.3.6.1.4.1.171.12.1.2.9
             systemSeverityTrapControl 1.3.6.1.4.1.171.12.1.2.9.1 agentnotifylevel read-write
Indicates the level of trap severity control. The system has a severity level control and each trap should have a severity control set. When trap events occur and its severity is higher than the system severity control level, the trap works as defined. If the event severity is lower than the system severity control level, the event is ignored as if it did not occur.
             systemSeverityLogControl 1.3.6.1.4.1.171.12.1.2.9.2 agentnotifylevel read-write
Indicates the level of trap severity control. The system has a severity level control and each trap should have a severity control set. When trap events occur and its severity is higher than the system severity control level, the trap works as defined. If the event severity is lower than the system severity control level, the event is ignored as if it did not occur.
         agentTrustedHostMgmt 1.3.6.1.4.1.171.12.1.2.10
               agentTrustedHostTable 1.3.6.1.4.1.171.12.1.2.10.1 no-access
This table contains the trusted host information.
                   agentTrustedHostEntry 1.3.6.1.4.1.171.12.1.2.10.1.1 no-access
A list of information about the trusted hosts.
                       agentTrustedHostIndex 1.3.6.1.4.1.171.12.1.2.10.1.1.1 integer read-only
The index of the trusted host entry.
                       agentTrustedHostIPAddress 1.3.6.1.4.1.171.12.1.2.10.1.1.2 ipaddress read-only
Specifies the IP address of the trusted host.
                       agentTrustedHostRowStatus 1.3.6.1.4.1.171.12.1.2.10.1.1.3 rowstatus read-only
Indicates the status of this entry. When creating a trusted host entry, the IP address should also be set.
                       agentTrustedHostIPSubnetMask 1.3.6.1.4.1.171.12.1.2.10.1.1.4 ipaddress read-only
Specifies the IP subnet mask of the trusted host.
                       agentTrustedHostForSNMP 1.3.6.1.4.1.171.12.1.2.10.1.1.5 integer read-only
Specifies the trusted host for SNMP. Enumeration: 'disabled': 2, 'enabled': 1.
                       agentTrustedHostForTELNET 1.3.6.1.4.1.171.12.1.2.10.1.1.6 integer read-only
Specifies the trusted host for Telnet. Enumeration: 'disabled': 2, 'enabled': 1.
                       agentTrustedHostForSSH 1.3.6.1.4.1.171.12.1.2.10.1.1.7 integer read-only
Specifies the trusted host for SSH. Enumeration: 'disabled': 2, 'enabled': 1.
                       agentTrustedHostForHTTP 1.3.6.1.4.1.171.12.1.2.10.1.1.8 integer read-only
Specifies the trusted host for HTTP. Enumeration: 'disabled': 2, 'enabled': 1.
                       agentTrustedHostForHTTPS 1.3.6.1.4.1.171.12.1.2.10.1.1.9 integer read-only
Specifies the trusted host for HTTPS. Enumeration: 'disabled': 2, 'enabled': 1.
                       agentTrustedHostForPING 1.3.6.1.4.1.171.12.1.2.10.1.1.10 integer read-only
Specifies the trusted host for PING. Enumeration: 'disabled': 2, 'enabled': 1.
                       agentTrustedHostAddrType 1.3.6.1.4.1.171.12.1.2.10.1.1.11 inetaddresstype read-only
The type of trusted host address as specified by the 'agentTrustedHostAddr' object.
                       agentTrustedHostAddr 1.3.6.1.4.1.171.12.1.2.10.1.1.12 inetaddress read-only
Specifies the IP address of the trusted host.
                       agentTrustedHostIPv6PrefixLen 1.3.6.1.4.1.171.12.1.2.10.1.1.13 integer read-only
Specifies the IPv6 prefix length of the IPv6 trusted host.
               agentTrustedHostDelAllState 1.3.6.1.4.1.171.12.1.2.10.2 integer read-write
Used to delete all trusted host entries. Enumeration: 'start': 2, 'none': 1.
         agentFDBMgmt 1.3.6.1.4.1.171.12.1.2.11
               agentFDBClearAllState 1.3.6.1.4.1.171.12.1.2.11.1 integer read-write
Used to clear all FDB entries. Enumeration: 'start': 2, 'other': 1.
               agentFDBClearByPortTable 1.3.6.1.4.1.171.12.1.2.11.2 no-access
Used to clear FDB entries by port.
                   agentFDBClearByPortEntry 1.3.6.1.4.1.171.12.1.2.11.2.1 no-access
This is an entry of the agentFDBClearByPortTable.
                       agentFDBClearPortIndex 1.3.6.1.4.1.171.12.1.2.11.2.1.1 integer no-access
This object indicates the port number.
                       agentFDBClearByPortAction 1.3.6.1.4.1.171.12.1.2.11.2.1.2 integer read-write
This object indicates whether to clear FDB or not. Enumeration: 'start': 2, 'other': 1.
               agentFDBClearByVlanTable 1.3.6.1.4.1.171.12.1.2.11.3 no-access
Used to clear FDB entries by port.
                   agentFDBClearByVlanEntry 1.3.6.1.4.1.171.12.1.2.11.3.1 no-access
This is an entry of agentFDBClearByPortTable.
                       agentFDBClearVid 1.3.6.1.4.1.171.12.1.2.11.3.1.1 vlanid no-access
This object indicates the VLAN-ID.
                       agentFDBClearByVlanAction 1.3.6.1.4.1.171.12.1.2.11.3.1.2 integer read-write
This object indicates whether to clear the FDB or not. Enumeration: 'start': 2, 'other': 1.
               agentFDBSecurityTable 1.3.6.1.4.1.171.12.1.2.11.4 no-access
Used to display the FDB entries that have been created by the security module.
                   agentFDBSecurityEntry 1.3.6.1.4.1.171.12.1.2.11.4.1 no-access
This is an entry of agentFDBSecurityTable.
                       agentFDBVid 1.3.6.1.4.1.171.12.1.2.11.4.1.1 vlanid no-access
This object indicates the VLAN-ID.
                       agentFDBMacAddress 1.3.6.1.4.1.171.12.1.2.11.4.1.2 macaddress no-access
This object indicates the MAC address.
                       agentFDBPort 1.3.6.1.4.1.171.12.1.2.11.4.1.3 integer read-only
This object indicates the port number.
                       agentFDBType 1.3.6.1.4.1.171.12.1.2.11.4.1.4 integer read-only
This object indicates the MAC address type. Enumeration: 'static': 2, 'dynamic': 1.
                       agentFDBStatus 1.3.6.1.4.1.171.12.1.2.11.4.1.5 integer read-only
This object indicates the MAC address's forwarding status. Enumeration: 'forward': 2, 'drop': 1.
                       agentFDBSecurityModule 1.3.6.1.4.1.171.12.1.2.11.4.1.6 integer read-only
This object is used to indicate which security module created the current MAC address. dot1x: 802.1X. wac: Web-based Access Control. jwac: Web-Based Access Control extension for Japan. port-security: Port Security. mac-based-access-control: MAC-based Access Control. compound-authentication: Compound Authentication. Enumeration: 'jwac': 3, 'wac': 2, 'dot1x': 1, 'mac-based-access-control': 5, 'port-security': 4, 'compound-authentication': 6.
         agentARPMgmt 1.3.6.1.4.1.171.12.1.2.12
               agentARPClearAllState 1.3.6.1.4.1.171.12.1.2.12.1 integer read-write
Used to clear all ARP entries. Enumeration: 'start': 2, 'other': 1.
               agentGratuitousARPMgmt 1.3.6.1.4.1.171.12.1.2.12.2
                   agentGratuitousARPSendIpifStatusUpState 1.3.6.1.4.1.171.12.1.2.12.2.1 integer read-write
This is used to enable/disable sending of gratuitous ARP request packets while the IPIF interface comes up. This is used to automatically announce the interface's IP address to other nodes. By default, the state is enabled, and only one ARP packet will be broadcast. Enumeration: 'disabled': 2, 'enabled': 1.
                   agentGratuitousARPSendDupIpDetectedState 1.3.6.1.4.1.171.12.1.2.12.2.2 integer read-write
This is used to enable/disable the sending of gratuitous ARP request packets while a duplicate IP is detected. By default, the state is enabled. The duplicate IP detected state indicates that the system has received an ARP request packet that was sent by an IP address that matches the system's own IP address. In this case, the system knows that somebody out there is using an IP address that is in conflict with the system. In order to reclaim the correct host of this IP address, the system can send out the gratuitous ARP request packet for this duplicate IP address. Enumeration: 'disabled': 2, 'enabled': 1.
                   agentGratuitousARPLearningState 1.3.6.1.4.1.171.12.1.2.12.2.3 integer read-write
This is used to enable/disable learning of an ARP entry in the ARP cache based on the received gratuitous ARP packet. If the switch receives a gratuitous ARP request/reply packet and the sender's IP address is in its ARP table, it should update the ARP entry. By default, the state is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                   agentGratuitousARPTable 1.3.6.1.4.1.171.12.1.2.12.2.4 no-access
Gratuitous ARP Table Information.
                       agentGratuitousARPEntry 1.3.6.1.4.1.171.12.1.2.12.2.4.1 no-access
A list of information from the Gratuitous ARP Table.
                           agentGratuitousARPInterfaceName 1.3.6.1.4.1.171.12.1.2.12.2.4.1.1 displaystring read-only
The name of the IP interface.
                           agentGratuitousARPPeriodicalSendInterval 1.3.6.1.4.1.171.12.1.2.12.2.4.1.2 integer read-write
This is used to configure the interval for the periodic sending of gratuitous ARP request packets. 0 means do not send gratuitous ARP request packets periodically.
                           agentGratuitousARPTrapState 1.3.6.1.4.1.171.12.1.2.12.2.4.1.3 integer read-write
This indicates the state of the gratuitous ARP trap. The switch can trap the IP conflict events to inform the administrator. By default, the trap is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                           agentGratuitousARPLogState 1.3.6.1.4.1.171.12.1.2.12.2.4.1.4 integer read-write
This indicates the state of the gratuitous Log trap. The switch can log the IP conflict events to inform the administrator. By default, the event log is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
               agentARPTotalARPEntries 1.3.6.1.4.1.171.12.1.2.12.3 integer read-only
Used to display the total number of ARP entries.
               agentARPRetryTimes 1.3.6.1.4.1.171.12.1.2.12.4 integer read-write
This indicates the retry times of the ARP request.
         swMultiImageCtrlTable 1.3.6.1.4.1.171.12.1.2.13 no-access
               swMultiImageCtrlEntry 1.3.6.1.4.1.171.12.1.2.13.1 no-access
A list of information about multiple image management.
                   swMultiImageCtrlID 1.3.6.1.4.1.171.12.1.2.13.1.1 integer read-only
The stacking section ID of the firmware image. The stacking section ID = 256 * Unit ID + Image File ID.
                   swMultiImageCtrlAction 1.3.6.1.4.1.171.12.1.2.13.1.2 integer read-write
This object indicates the running status of the image which is specified by swMultiImageCtrlID and swMultiImageCtrlUnitID. config-as-bootup-fw (1) - Configured as the bootup firmware by the indicated firmware(ID). delete (2) - Delete the firmware by indicated firmware ID. none (3) - No action. Enumeration: 'config-as-bootup-fw': 1, 'none': 3, 'delete': 2.
         agentOutOfBandDataBits 1.3.6.1.4.1.171.12.1.2.14 integer read-only
This object indicates the out-of-band data bits.
         agentOutOfBandParityBits 1.3.6.1.4.1.171.12.1.2.15 displaystring read-only
This object indicates the out-of-band parity bits.
         agentOutOfBandStopBits 1.3.6.1.4.1.171.12.1.2.16 integer read-only
This object indicates the out-of-band stop bits.
         agentOutOfBandAutoLogoutConfig 1.3.6.1.4.1.171.12.1.2.17 integer read-write
This object allows the user to specify an out-of-band auto logout time. Enumeration: 'minutes-5': 3, 'minutes-15': 5, 'never': 1, 'minutes-10': 4, 'minutes-2': 2.
         agentBscFileSystemMgmt 1.3.6.1.4.1.171.12.1.2.18
               agentBscFileSystemTable 1.3.6.1.4.1.171.12.1.2.18.1 no-access
A list of MIB File System Basic Configuration entries supported by the file update of this agent.
                   agentBscFileSystemEntry 1.3.6.1.4.1.171.12.1.2.18.1.1 no-access
A File System basic configuration entry that contains objects describing a particular MIB supported by this agent.
                       agentBscFileSystemIndex 1.3.6.1.4.1.171.12.1.2.18.1.1.1 integer32 read-only
The table index for the file entry. This object describes the file type. runtime-code (1), log-file (2), cfg-file (3), attack-log-file (7)
                       agentBscFileSystemDscr 1.3.6.1.4.1.171.12.1.2.18.1.1.2 displaystring read-only
The description of the software file purpose in this entry.
                       agentBscFileSystemServerAddr 1.3.6.1.4.1.171.12.1.2.18.1.1.3 ipaddress read-write
The IP address where the file to be downloaded is located, or the IP address where the file will be uploaded to.
                       agentBscFileSystemServerIPv6Addr 1.3.6.1.4.1.171.12.1.2.18.1.1.4 ipv6address read-write
The IPv6 address where the file is to be downloaded from or uploaded to.
                       agentBscFileSystemServerFileName 1.3.6.1.4.1.171.12.1.2.18.1.1.5 displaystring read-write
The name of the file to be downloaded from or uploaded to the TFTP server. If agentBscFileSystemDeviceFileName is not set, the switch will default to using the bootup file as the runtime image for the switch.
                       agentBscFileSystemDeviceDriverID 1.3.6.1.4.1.171.12.1.2.18.1.1.6 integer read-write
Specifies the drive of the device that the firmware to be uploaded/downloaded is located. If none (1) is specified, the switch will default to the current drive. Enumeration: 'c': 4, 'a': 2, 'none': 1, 'b': 3, 'e': 6, 'd': 5, 'g': 8, 'f': 7, 'i': 10, 'h': 9, 'k': 12, 'j': 11, 'm': 14, 'l': 13, 'o': 16, 'n': 15, 'q': 18, 'p': 17, 's': 20, 'r': 19, '': 22, 't': 21, 'w': 24, 'v': 23, 'y': 26, 'x': 25, 'z': 27.
                       agentBscFileSystemDeviceFileName 1.3.6.1.4.1.171.12.1.2.18.1.1.7 displaystring read-write
The name of the file to be downloaded to the device, or uploaded from the device. When downloading or uploading, the agentBscFileSystemServerFileName object must also be set.
                       agentBscFileSystemLoadType 1.3.6.1.4.1.171.12.1.2.18.1.1.8 integer read-write
This object allows the user to select a download or upload function for the file. Note: For systems that do not support changes to this object, setting a value for this object will cause the system to return a bad-value error message. Enumeration: 'download': 3, 'other': 1, 'upload': 2.
                       agentBscFileSystemCtrlUnitID 1.3.6.1.4.1.171.12.1.2.18.1.1.9 unitlist read-write
Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from. One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 to unit ID 12. If this list is set to null it represents all stack switches.
                       agentBscFileSystemBootUpImage 1.3.6.1.4.1.171.12.1.2.18.1.1.10 truthvalue read-write
The result of the download will depend on whether the boot_up option has been specified. Case 1: In the case of the master unit providing the file system and the slave unit not providing the file system, when the boot_up parameter is specified, then the file will be downloaded to the boot_up image on the slave. If the boot_up parameter is not specified, then the file will not be downloaded to this slave unit. Case 2: In the case of the master unit not providing the file system and the slave unit providing the file system, when the boot_up parameter is specified, then the file will be downloaded to the boot_up image on the slave unit. If boot_up is not specified, then the file will not be downloaded to this slave unit. Case 3: In the case of the master unit and the slave unit both supporting or not supporting the file system, the file will be downloaded to the specified file on the slave unit. If boot_up is specified, the downloaded file will be assigned as the boot_up image. True: boot_up option is specified. False: boot_up option is not specified..
                       agentBscFileSystemForceAgree 1.3.6.1.4.1.171.12.1.2.18.1.1.11 truthvalue read-write
When the force_agree option is specified, the reboot command will be executed immediately without any further confirmation from the user. True: force_agree option is specified. False: force_agree option is not specified..
                       agentBscFileSystemCtrl 1.3.6.1.4.1.171.12.1.2.18.1.1.12 integer read-write
This object allows the user to download runtime software. The settings will take effect when the system restarts. See Note (1) below Note 1: For systems which do not support value changes to this object, setting these values will cause the system to return a bad-value error message start (3) - activate firmware. Enumeration: 'inactive': 2, 'start': 3, 'other': 1.
                       agentBscFileSystemInterfaceName 1.3.6.1.4.1.171.12.1.2.18.1.1.13 displaystring read-write
This node is used to specify the interface name when agentBscFileSystemServerIPv6Addr is the local link address.
                       agentBscFileSystemServerDomainName 1.3.6.1.4.1.171.12.1.2.18.1.1.14 displaystring read-write
This object indicates the domain name of the TFTP server.
                       agentBscFileSystemIncrement 1.3.6.1.4.1.171.12.1.2.18.1.1.15 truthvalue read-write
If increment is specified, then the existing configuration will not be cleared before applying of the new configuration. If it is not specified, then the existing configuration will be cleared before applying of the new configuration. True : keep valid False : erase.
               agentBscFileSystemSaveConfigDriverID 1.3.6.1.4.1.171.12.1.2.18.2 integer read-write
The drive on the device that the configuration file is will be saved to. If none (1) is specified, the switch places the file on the current drive by default. Enumeration: 'c': 4, 'a': 2, 'none': 1, 'b': 3, 'e': 6, 'd': 5, 'g': 8, 'f': 7, 'i': 10, 'h': 9, 'k': 12, 'j': 11, 'm': 14, 'l': 13, 'o': 16, 'n': 15, 'q': 18, 'p': 17, 's': 20, 'r': 19, '': 22, 't': 21, 'w': 24, 'v': 23, 'y': 26, 'x': 25, 'z': 27.
               agentBscFileSystemSaveConfigFileName 1.3.6.1.4.1.171.12.1.2.18.3 displaystring read-write
The name of the configuration file that will be saved to the device. When agentBscFileSystemSaveCfg is set to cfg (2), and if the agentBscFileSystemSaveConfigFileName is not null, the configuration file will be saved to the set file name. If set to null, the configuration file will be saved to the boot_up CFG file.
               agentBscFileSystemSaveCfg 1.3.6.1.4.1.171.12.1.2.18.4 integer read-write
This indicates the method of saving information to the NV-RAM of the device. other (1) - None of the following. cfg (2) - Save configuration. log (3) - Save log. all (4) - Save both ( active configuration and log). Enumeration: 'cfg': 2, 'all': 4, 'other': 1, 'log': 3.
               agentFileSystemConfigTable 1.3.6.1.4.1.171.12.1.2.18.5 no-access
This table indicates the information about the bootup files.
                   agentFileSystemConfigEntry 1.3.6.1.4.1.171.12.1.2.18.5.1 no-access
A list of information about the bootup files for each unit of the switch stack.
                       agentFileSystemUnit 1.3.6.1.4.1.171.12.1.2.18.5.1.1 integer32 read-only
The unit ID.
                       agentFileSystemDriverID 1.3.6.1.4.1.171.12.1.2.18.5.1.2 integer read-write
The drive on the device that the configuration file will be saved to. If none (1) is specified, the switch will place the file to the current drive by default. Enumeration: 'c': 4, 'a': 2, 'none': 1, 'b': 3, 'e': 6, 'd': 5, 'g': 8, 'f': 7, 'i': 10, 'h': 9, 'k': 12, 'j': 11, 'm': 14, 'l': 13, 'o': 16, 'n': 15, 'q': 18, 'p': 17, 's': 20, 'r': 19, '': 22, 't': 21, 'w': 24, 'v': 23, 'y': 26, 'x': 25, 'z': 27.
                       agentFileSystemBootImage 1.3.6.1.4.1.171.12.1.2.18.5.1.3 displaystring read-write
When displayed, it shows the current bootup image file name. When set, the set name will be set as the bootup image.
                       agentFileSystemBootConfig 1.3.6.1.4.1.171.12.1.2.18.5.1.4 displaystring read-write
When displayed, it shows the current bootup configuration file name. When set, the set name will be set as the bootup configuration.
                       agentFileSystemActConfig 1.3.6.1.4.1.171.12.1.2.18.5.1.5 displaystring read-write
When displayed, it shows null. When set, the set name will be active at once, but the set name will not be set as the bootup configuration.
         agentReboot 1.3.6.1.4.1.171.12.1.2.19 integer read-write
Used to restart the switch. Enumeration: 'start': 2, 'none': 1.
         agentReset 1.3.6.1.4.1.171.12.1.2.20 integer read-write
Used to reset all switch parameters. none (1): No action. This is the default value of this object. config (2): All parameters are reset to default settings. The device will neither save nor reboot. system (3): All parameters are reset to default settings. The switch will then do a factory reset, save, and reboot. reset (4) : All parameters will be reset to default settings except for the IP address, user account, and history log. The device will neither save nor reboot. system-exclude-vlan(5) : All parameters are reset to default settings except for VLAN. The switch will then save its settings and reboot. system-exclude-ip(6) : All parameters are reset to default settings except IP address. The switch will then save its settings and reboot. system-exclude-vlan-ip(7): All parameters are reset to default settings except VLAN and IP address. The switch will then save its settings and reboot. Enumeration: 'reset': 4, 'system-exclude-ip': 6, 'none': 1, 'system-exclude-vlan': 5, 'system': 3, 'system-exclude-vlan-ip': 7, 'config': 2.
         agentFTPFileTable 1.3.6.1.4.1.171.12.1.2.21 no-access
A list of the MIB Basic Config entries support files updated by this agent.
               agentFTPFileEntry 1.3.6.1.4.1.171.12.1.2.21.1 no-access
A basic configuration entry containing the objects describing a particular MIB supported by this agent.
                   agentFTPFileIndex 1.3.6.1.4.1.171.12.1.2.21.1.1 integer32 read-only
The table index for the file entry. This object describes the file type runtime-code (1), log-file (2), cfg-file (3)
                   agentFTPFileDscr 1.3.6.1.4.1.171.12.1.2.21.1.2 displaystring read-write
The description of the software file purpose in this entry. Note: For systems which do not support changes to this object, setting a value for this object will cause the system to return bad-value error messages.
                   agentFTPFileLoadType 1.3.6.1.4.1.171.12.1.2.21.1.3 integer read-write
This object provides the user with a choice of uploading or downloading the selected file. Note: For systems which do not support a change of this object, setting a value to this object will cause the system to return bad-value error messages. Enumeration: 'download': 3, 'other': 1, 'upload': 2.
                   agentFTPFileAddr 1.3.6.1.4.1.171.12.1.2.21.1.4 ipaddress read-write
The IP address that the file to be downloaded is located on, or the IP address where the file will be uploaded to.
                   agentFTPTCPPort 1.3.6.1.4.1.171.12.1.2.21.1.5 integer read-write
The TCP port number being used to establish the command connection.
                   agentFTPFileName 1.3.6.1.4.1.171.12.1.2.21.1.6 displaystring read-write
The name of the file to be downloaded from, or uploaded to, the FTP server.
                   agentFTPUserName 1.3.6.1.4.1.171.12.1.2.21.1.7 displaystring read-write
This is the user name to enter in upload/download.
                   agentFTPPassword 1.3.6.1.4.1.171.12.1.2.21.1.8 displaystring read-write
This is the password to enter for an upload/download.
                   agentFTPFileCtrlID 1.3.6.1.4.1.171.12.1.2.21.1.9 integer read-write
The section ID of the firmware image or configuration file. A value of 0 indicates the boot-up firmware image or configuration file.
                   agentFTPFileBIncrement 1.3.6.1.4.1.171.12.1.2.21.1.10 truthvalue read-write
This object indicates whether the previous configuration will remain valid or not after downloading the configuration file. True: Keep valid False: Erase.
                   agentFTPFileCtrl 1.3.6.1.4.1.171.12.1.2.21.1.11 integer read-write
This object gives the user the option to download runtime software. The setting will take effect when the system restarts. See Note (1) below Note 1: For systems which do not support changes to this object, setting a value for this object will cause the system to return bad-value error messages. Enumeration: 'start': 2, 'other': 1.
                   agentFTPFileBootUpImage 1.3.6.1.4.1.171.12.1.2.21.1.12 truthvalue read-write
This object indicates whether to set the special file as a boot up file or not. True: The boot-up option is specified. False: The boot-up option is not specified.
                   agentFTPFileForceAgree 1.3.6.1.4.1.171.12.1.2.21.1.13 truthvalue read-write
When the force-agree option is specified, the reboot command will be executed immediately without any further confirmation from the user. True: Force-agree option is specified. False: Force-agree option is not specified.
                   agentFTPFileIPv6Addr 1.3.6.1.4.1.171.12.1.2.21.1.14 displaystring read-write
The IPv6 address where the file is to be downloaded from or uploaded to.
                   agentFTPFileInterfaceName 1.3.6.1.4.1.171.12.1.2.21.1.15 displaystring read-write
This node is used to specify the interface name when agentFTPFileIPv6Addr is the local link address.
                   agentFTPFileUnitID 1.3.6.1.4.1.171.12.1.2.21.1.16 unitlist read-write
Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from. One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 to unit ID 12.If this list is set to null it represents all stack switches.
         agentSnmpTrapState 1.3.6.1.4.1.171.12.1.2.22 integer read-write
This object indicates if the SNMP trap is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
         agentOutOfBandMgmt 1.3.6.1.4.1.171.12.1.2.23
               agentOutOfBandMgmtState 1.3.6.1.4.1.171.12.1.2.23.1 integer read-write
Enables or disables the interface. Enumeration: 'disabled': 2, 'enabled': 1.
               agentOutOfBandMgmtIpAddr 1.3.6.1.4.1.171.12.1.2.23.2 ipaddress read-write
The IP address for out of band management. This object can only take the value of the unicast IP address.
               agentOutOfBandMgmtSubnetMask 1.3.6.1.4.1.171.12.1.2.23.3 ipaddress read-write
The IP net mask for out of band management.
               agentOutOfBandMgmtGateway 1.3.6.1.4.1.171.12.1.2.23.4 ipaddress read-write
The gateway for out of band management.
               agentOutOfBandMgmtLinkStatus 1.3.6.1.4.1.171.12.1.2.23.5 integer read-only
The current Link status for out of band management. Enumeration: 'link-down': 2, 'link-up': 1.
         agentTrapMgmt 1.3.6.1.4.1.171.12.1.2.24
               agentTrapColdStart 1.3.6.1.4.1.171.12.1.2.24.1 integer read-write
When enabled (1), whenever the device detects a cold start event, a trap will be sent out. Enumeration: 'disabled': 2, 'enabled': 1.
               agentTrapWarmStart 1.3.6.1.4.1.171.12.1.2.24.2 integer read-write
When enabled (1), whenever the device detects a warm start event, a trap will be sent out. Enumeration: 'disabled': 2, 'enabled': 1.
               agentTrapRmonRisingAlarm 1.3.6.1.4.1.171.12.1.2.24.3 integer read-write
When enabled (1), whenever the device detects a RMON rising alarm event , a trap will be sent out. Enumeration: 'disabled': 2, 'enabled': 1.
               agentTrapRmonFallingAlarm 1.3.6.1.4.1.171.12.1.2.24.4 integer read-write
When enabled (1), whenever the device detects a RMON falling alarm event, a trap will be sent out. Enumeration: 'disabled': 2, 'enabled': 1.
               agentTrapCfgSave 1.3.6.1.4.1.171.12.1.2.24.5 integer read-write
When enabled (1), whenever the device detects a configuration saving completed event, a trap will be sent out. Enumeration: 'disabled': 2, 'enabled': 1.
               agentTrapCfgUpload 1.3.6.1.4.1.171.12.1.2.24.6 integer read-write
When enabled (1), whenever the device detects a configuration uploading completed event, a trap will be sent out. Enumeration: 'disabled': 2, 'enabled': 1.
               agentTrapCfgDownload 1.3.6.1.4.1.171.12.1.2.24.7 integer read-write
When enabled (1), whenever the device detects a configuration downloading completed event, a trap will be sent out Enumeration: 'disabled': 2, 'enabled': 1.
         agentFTPFileSystemTable 1.3.6.1.4.1.171.12.1.2.25 no-access
The FTP management table for the file system
               agentFTPFileSystemEntry 1.3.6.1.4.1.171.12.1.2.25.1 no-access
A File System basic configuration entry that contains objects describing a particular MIB supported by this agent.
                   agentFTPFileSystemIndex 1.3.6.1.4.1.171.12.1.2.25.1.1 integer32 no-access
The table index for the file entry.
                   agentFTPFileSystemDscr 1.3.6.1.4.1.171.12.1.2.25.1.2 displaystring read-only
The description of the software file purpose in this entry.
                   agentFTPFileSystemLoadType 1.3.6.1.4.1.171.12.1.2.25.1.3 integer read-write
This object allows the user to select a download or upload function for the file. Enumeration: 'download': 3, 'other': 1, 'upload': 2.
                   agentFTPFileSystemAddressType 1.3.6.1.4.1.171.12.1.2.25.1.4 inetaddresstype read-write
The address type of agentFTPFileSystemAddress.
                   agentFTPFileSystemAddress 1.3.6.1.4.1.171.12.1.2.25.1.5 inetaddress read-write
This object indicates the FTP server address.
                   agentFTPFileSystemTCPPort 1.3.6.1.4.1.171.12.1.2.25.1.6 integer read-write
The TCP port number being used to establish the control connection.
                   agentFTPFileSystemServerFileName 1.3.6.1.4.1.171.12.1.2.25.1.7 displaystring read-write
The name of the file to be downloaded from or uploaded to the FTP server.
                   agentFTPFileSystemDeviceFileName 1.3.6.1.4.1.171.12.1.2.25.1.8 displaystring read-write
The name of the file to be downloaded to the device, or uploaded from the device. If agentFTPFileSystemDeviceFileName is not set, the switch will default to the bootup file.
                   agentFTPFileSystemUserName 1.3.6.1.4.1.171.12.1.2.25.1.9 displaystring read-write
This object indicates the user name to access the FTP server.
                   agentFTPFileSystemPassword 1.3.6.1.4.1.171.12.1.2.25.1.10 displaystring read-write
This object indicates the password to access the FTP server.
                   agentFTPFileSystemCtrlUnitID 1.3.6.1.4.1.171.12.1.2.25.1.11 unitlist read-write
Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from. One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 to unit ID 12.If this list is set to null it represents all stack switches.
                   agentFTPFileSystemBootUpImage 1.3.6.1.4.1.171.12.1.2.25.1.12 truthvalue read-write
This object indicates whether to set the special file as the boot up file or not. True: The boot-up option is specified. False: The boot-up option is not specified.
                   agentFTPFileSystemCtrl 1.3.6.1.4.1.171.12.1.2.25.1.13 integer read-write
This object allows the user to execute an FTP download/upload. Enumeration: 'start': 2, 'other': 1.
         agentBscCMDLogState 1.3.6.1.4.1.171.12.1.2.26 integer read-write
This object indicates the command logging state. Enumeration: 'disabled': 2, 'enabled': 1.
         agentBscBroadcastPingReplyState 1.3.6.1.4.1.171.12.1.2.27 integer read-write
This object indicates the broadcast ping reply state. Enumeration: 'disabled': 2, 'enabled': 1.
         agentBscTftpConfigMgmt 1.3.6.1.4.1.171.12.1.2.28
               agentBscTftpCfgFirmwareFile 1.3.6.1.4.1.171.12.1.2.28.1 displaystring read-write
The firmware pathname that needs to be downloaded/uploaded from/to the TFTP server.
               agentBscTftpCfgConfigFile 1.3.6.1.4.1.171.12.1.2.28.2 displaystring read-write
The configuration pathname that needs to be downloaded/uploaded from/to the TFTP server.
               agentBscTftpCfgLogFile 1.3.6.1.4.1.171.12.1.2.28.3 displaystring read-write
The log pathname that needs to be uploaded to the TFTP server.
               agentBscTftpCfgAttackLogFile 1.3.6.1.4.1.171.12.1.2.28.4 displaystring read-write
The attack log pathname that needs to be uploaded to the TFTP server.
               agentBscTftpCfgCertificateFile 1.3.6.1.4.1.171.12.1.2.28.5 displaystring read-write
The certificate pathname that needs to be downloaded from the TFTP server.
               agentBscTftpCfgKeyFile 1.3.6.1.4.1.171.12.1.2.28.6 displaystring read-write
The key pathname that needs to be downloaded from the TFTP server.
               agentBscTftpCfgTechSuooprtFile 1.3.6.1.4.1.171.12.1.2.28.7 displaystring read-write
The technique's support information pathname that needs to be uploaded to the TFTP server.
               agentBscTftpCfgDebugLogFile 1.3.6.1.4.1.171.12.1.2.28.8 displaystring read-write
The debug log pathname that needs to be uploaded to the TFTP server.
               agentBscTftpCfgSIMFirmwareFile 1.3.6.1.4.1.171.12.1.2.28.9 displaystring read-write
The firmware pathname that needs to be downloaded/uploaded from/to the TFTP server when it is SIM enabled.
               agentBscTftpCfgSIMConfigFile 1.3.6.1.4.1.171.12.1.2.28.10 displaystring read-write
The configuration pathname that needs to be downloaded/uploaded from/to the TFTP server when it is SIM enabled.
               agentBscTftpCfgSIMLogFile 1.3.6.1.4.1.171.12.1.2.28.11 displaystring read-write
The log pathname that needs to be uploaded to the TFTP server when it is SIM enabled.
               agentBscTftpCfgServerIPAddr 1.3.6.1.4.1.171.12.1.2.28.12 ipaddress read-write
The IPv4 address of the TFTP server.
               agentBscTftpCfgServerIPv6Addr 1.3.6.1.4.1.171.12.1.2.28.13 ipv6address read-write
The IPv6 address of the TFTP server.
               agentBscTftpCfgServerDomainName 1.3.6.1.4.1.171.12.1.2.28.14 displaystring read-write
The domain name of the TFTP server.
         agentBscCommunityEncryptionState 1.3.6.1.4.1.171.12.1.2.29 integer read-write
This object indicates the encryption state on the SNMP community string. Enumeration: 'disabled': 2, 'enabled': 1.
     agentIpProtoConfig 1.3.6.1.4.1.171.12.1.3
         agentIpNumOfIf 1.3.6.1.4.1.171.12.1.3.1 integer32 read-only
The total number of IP interfaces supported by this agent.
         agentIpTftpServerAddr 1.3.6.1.4.1.171.12.1.3.2 ipaddress read-write
The IP address of the TFTP Server.
         agentIpGetIpFrom 1.3.6.1.4.1.171.12.1.3.3 integer read-write
This object indicates if the agent will get its system IP address from a Bootp/DHCP server at start up. Enumeration: 'disabled': 2, 'dhcp': 4, 'other': 1, 'bootp': 3.
         agentIpAutoconfig 1.3.6.1.4.1.171.12.1.3.4 integer read-write
Indicates the status of automatically getting the configuration information from a TFTP server connected to the device. Enumeration: 'disabled': 2, 'enabled': 1.
         agentIpAutoconfigTimeout 1.3.6.1.4.1.171.12.1.3.5 integer32 read-write
This timer is used to limit the length of time for getting the configuration information from a TFTP server connected to the device.
     agentIpTrapManager 1.3.6.1.4.1.171.12.1.4
         agentTrapManagerTable 1.3.6.1.4.1.171.12.1.4.2 no-access
A list of trap managers that the SNMP traps will be sent to.
             agentTrapManagerEntry 1.3.6.1.4.1.171.12.1.4.2.1 no-access
Each entry contains the particular trap manager's settings.
                 agentTrapManagerIndex 1.3.6.1.4.1.171.12.1.4.2.1.1 integer no-access
A value that uniquely identifies trapDestEntry.
                 agentTrapManagerIpAddr 1.3.6.1.4.1.171.12.1.4.2.1.2 ipaddress read-write
The destination IP address for SNMP traps.
                 agentTrapManagerComm 1.3.6.1.4.1.171.12.1.4.2.1.3 displaystring read-write
The community string used to encode SNMP trap packets being sent to the trap manager.
                 agentTrapManagerMsgVer 1.3.6.1.4.1.171.12.1.4.2.1.4 integer read-write
This object indicates the version of trap packets that will be sent to this trap manager. The default setting is SNMP Agent Version Dependent. Note: Because some of these functions will be limited by the support of the system in question, some selected items may be invalid. If one of these items is selected, a bad value error message will prompt the user. Enumeration: 'v2Trap': 3, 'v1Trap': 2, 'snmpAgentVersionDependent': 1.
                 agentTrapManagerStatus 1.3.6.1.4.1.171.12.1.4.2.1.5 integer read-write
This object indicates whether or not the trap should be sent to the trap manager. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     agentNotify 1.3.6.1.4.1.171.12.1.7
         agentNotifMgmt 1.3.6.1.4.1.171.12.1.7.1
             notifFirmwareMgmt 1.3.6.1.4.1.171.12.1.7.1.2
         agentNotifFirmware 1.3.6.1.4.1.171.12.1.7.2
             agentNotifyPrefix 1.3.6.1.4.1.171.12.1.7.2.0
                 agentsystemRestart 1.3.6.1.4.1.171.12.1.7.2.0.1
This trap contains the reboot information.
                 agentSaveToNVRAM 1.3.6.1.4.1.171.12.1.7.2.0.2
This trap is sent whenever all the device configuration has been saved to NV-RAM.
                 agentFileTransferStatusChange 1.3.6.1.4.1.171.12.1.7.2.0.3
File transfer status change notification.
                 agentSetToFactoryDefault 1.3.6.1.4.1.171.12.1.7.2.0.4
This trap is sent whenever the 'set to factory default' setting has been processed.
                 agentGratuitousARPTrap 1.3.6.1.4.1.171.12.1.7.2.0.5
This trap is sent when there is an IP address conflict.
                 agentLoginFailTrap 1.3.6.1.4.1.171.12.1.7.2.0.6
The trap is sent when a login has failed through one of the login types (console, Telnet, web, SSL or SSH).
                 agentFirmwareUpgrade 1.3.6.1.4.1.171.12.1.7.2.0.7
This trap is sent when the process of upgrading the firmware via SNMP has finished.
                 agentAccessFlashFailed 1.3.6.1.4.1.171.12.1.7.2.0.8
The trap is sent when access to the flash fails.
                 agentCfgOperCompleteTrap 1.3.6.1.4.1.171.12.1.7.2.0.9
The trap is sent when the configuration is completely saved, uploaded or downloaded.
             notificationBindings 1.3.6.1.4.1.171.12.1.7.2.1
                 unitID 1.3.6.1.4.1.171.12.1.7.2.1.1 integer no-access
The unit ID of the device which triggered the event.
                 trapInfosystemRestart 1.3.6.1.4.1.171.12.1.7.2.1.2 displaystring read-only
This object indicates the last time the device rebooted.
                 agentGratuitousARPIpAddr 1.3.6.1.4.1.171.12.1.7.2.1.3 ipaddress no-access
A duplicate IP address with the switch already exists.
                 agentGratuitousARPMacAddr 1.3.6.1.4.1.171.12.1.7.2.1.4 macaddress no-access
This object is the MAC address of the device which has the duplicate IP address.
                 agentGratuitousARPPortNumber 1.3.6.1.4.1.171.12.1.7.2.1.5 displaystring no-access
This indicates the portNum with a string. For example, if the device is in standalone mode, and the port number is 23, the string should be 23. If the device is in stacking mode, and the unit ID is 2, and the port number is 3, the string should be 2:3.
                 agentLoginType 1.3.6.1.4.1.171.12.1.7.2.1.6 integer no-access
The type is the user login method type. Enumeration: 'web': 3, 'console': 1, 'ssh': 5, 'telnet': 2, 'ssl': 4.
                 agentLoginAAAMethod 1.3.6.1.4.1.171.12.1.7.2.1.7 integer no-access
This method is the AAA login method. Enumeration: 'none': 1, 'local': 2, 'server': 3.
                 agentLoginUserName 1.3.6.1.4.1.171.12.1.7.2.1.8 displaystring no-access
This object is the name of the user that failed to login to the switch.
                 agentLoginIpAddr 1.3.6.1.4.1.171.12.1.7.2.1.9 ipaddress no-access
This object is the login type from the IP address.
                 agentLoginMacAddr 1.3.6.1.4.1.171.12.1.7.2.1.10 macaddress no-access
This object is the login type from a MAC address.
                 agentLoginAAAServerAddr 1.3.6.1.4.1.171.12.1.7.2.1.11 ipaddress no-access
This object is the login type through a console authenticated by an AAA server.
                 agentLoginFailInfo 1.3.6.1.4.1.171.12.1.7.2.1.12 integer no-access
This object indicates the reason for the login failure. Enumeration: 'server-timeout': 3, 'other': 1, 'authenticate-fail': 2.
                 agentAccessFlashOper 1.3.6.1.4.1.171.12.1.7.2.1.13 displaystring no-access
This object indicates the operation of the access flash failure.
                 agentAccessFlashAddr 1.3.6.1.4.1.171.12.1.7.2.1.14 integer no-access
This object indicates the address of the access flash failure.
                 agentCfgOperate 1.3.6.1.4.1.171.12.1.7.2.1.15 integer no-access
This object indicates the operation type of the configuration. Enumeration: 'download': 3, 'save': 1, 'upload': 2.