ADTRAN-DSUDPP-MIB: View SNMP OID List / Download MIB

VENDOR: ADTRAN


 Home MIB: ADTRAN-DSUDPP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 adtran 1.3.6.1.4.1.664
         adProducts 1.3.6.1.4.1.664.1
             adDSUDP 1.3.6.1.4.1.664.1.8
                   adDSUDPSelfTestPass 1.3.6.1.4.1.664.1.80.806
The DSUDP Self Diagnostics Passed.
                   adDSUDPSelfTestFail 1.3.6.1.4.1.664.1.80.807
The DSUDP Self Diagnostics Failed
                   adDSUDPNetworkINS 1.3.6.1.4.1.664.1.80.808
The network channel is In-Service. The OOS/OOF condition has cleared.
                   adDSUDPNetworkOOS 1.3.6.1.4.1.664.1.80.809
The network channel is in an Out-Of-Service state.
                   adDSUDPdsuLoopbackClear 1.3.6.1.4.1.664.1.80.810
The DSU Loopback test condition cleared.
                   adDSUDPdsuLoopback 1.3.6.1.4.1.664.1.80.811
The DSU Loopback test is active.
                   adDSUDPchannelLoopbackClear 1.3.6.1.4.1.664.1.80.812
The Channel Loopback test cleared.
                   adDSUDPchannelLoopback 1.3.6.1.4.1.664.1.80.813
The Channel Loopback test is active.
                   adDSUDPocuLoopbackClear 1.3.6.1.4.1.664.1.80.814
The OCU Loopback test cleared.
                   adDSUDPocuLoopback 1.3.6.1.4.1.664.1.80.815
The OCU Loopback test is active.
                   adDSUDPThrsAlertDailyUAS 1.3.6.1.4.1.664.1.80.867
The Daily Un-Available Seconds UAS parameter has reached or exceeds its threshold value.
                   adDSUDPThrsAlertDailyAvail 1.3.6.1.4.1.664.1.80.875
The daily percent channel availability has reached or dropped below its threshold value.
                   adDSUDPThrsAlertIntUAS 1.3.6.1.4.1.664.1.80.883
The Interval Un-Available Seconds (UAS) parameter has reached or exceeds its threshold value.
         adMgmt 1.3.6.1.4.1.664.2
             adDSUDPmg 1.3.6.1.4.1.664.2.8
                 adDSUDPprov 1.3.6.1.4.1.664.2.8.3
                     adDSUDPprovNet 1.3.6.1.4.1.664.2.8.3.1
                         adDSUDPnetLoopRate 1.3.6.1.4.1.664.2.8.3.1.1 integer read-write
Indicates the DS0 loop data rate Enumeration: 'bps56k': 6, 'bps38k': 5, 'bps2400': 1, 'bps9600': 3, 'bps19k': 4, 'bps4800': 2, 'bps64k': 7.
                         adDSUDPnetType 1.3.6.1.4.1.664.2.8.3.1.2 integer read-write
Selects the network type Enumeration: 'dds': 1, 'accunetSW56': 2, 'usSprintSW56': 3.
                         adDSUDPnetScrambler 1.3.6.1.4.1.664.2.8.3.1.3 integer read-write
Disables/Enables Scrambling Enumeration: 'suppressLBE': 3, 'normalData': 1, 'scrambledData': 2.
                         adDSUDPnetRemoteCfg 1.3.6.1.4.1.664.2.8.3.1.4 integer read-write
Enables/Disables configuration by a remote DSUDP Enumeration: 'enable': 1, 'disable': 2.
                     adDSUDPprovDte 1.3.6.1.4.1.664.2.8.3.2
                         adDSUDPdteRate 1.3.6.1.4.1.664.2.8.3.2.1 integer read-write
Selects bit rate of primary DTE Enumeration: 'bps56kor57p6k': 6, 'bps38k': 5, 'bps2400': 1, 'bps9600': 3, 'bps19k': 4, 'bps4800': 2, 'bps64k': 7.
                         adDSUDPdteFormat 1.3.6.1.4.1.664.2.8.3.2.2 integer read-write
Selects DTE data format Enumeration: 'synchronous': 2, 'asynchronous': 1.
                         adDSUDPdteWordLength 1.3.6.1.4.1.664.2.8.3.2.3 integer read-write
Selects DTE asynchronous word length Enumeration: 'bits11': 3, 'bits9': 1, 'bits10': 2.
                         adDSUDPdteInBandCommand 1.3.6.1.4.1.664.2.8.3.2.4 integer read-write
Selects DTE in-band command type Enumeration: 'disable': 1, 'enableV25BCCASY': 4, 'enableV25SDLC': 3, 'enableAT': 2.
                         adDSUDPdteTxClock 1.3.6.1.4.1.664.2.8.3.2.5 integer read-write
Selects transmit timing source Enumeration: 'internal': 1, 'external': 2.
                         adDSUDPdteCSOptions 1.3.6.1.4.1.664.2.8.3.2.6 integer read-write
Configures CS signal lead on primary DTE Enumeration: 'onWithRSandCD': 4, 'followsRS': 2, 'forceOn': 1, 'onWithCD': 3, 'off5secAfterLOCD': 5.
                         adDSUDPdteAntiStream 1.3.6.1.4.1.664.2.8.3.2.7 integer read-write
Configures DTE Anti-Streaming Disconnect Enumeration: 'active60Sec': 4, 'active30Sec': 3, 'disable': 1, 'active10Sec': 2.
                         adDSUDPdteCDOptions 1.3.6.1.4.1.664.2.8.3.2.8 integer read-write
Configures CD signal lead on primary DTE Enumeration: 'off5SecAfterLOCD': 3, 'forceOn': 1, 'normal': 2.
                         adDSUDPdteTROptions 1.3.6.1.4.1.664.2.8.3.2.9 integer read-write
Configures handling of TR lead from Primary DTE Enumeration: 'ignore': 1, 'offOnDials0': 3, 'offOnDials1': 4, 'normal': 2.
                         adDSUDPdteSROptions 1.3.6.1.4.1.664.2.8.3.2.10 integer read-write
Configures SR signal lead to primary DTE Enumeration: 'offInTestAndOOS': 5, 'offWithLOCD': 3, 'offInTest': 4, 'forceOn': 1, 'offWithOOS': 2, 'offInTestAndLOCD': 6.
                         adDSUDPdteRSCSDelay 1.3.6.1.4.1.664.2.8.3.2.11 integer read-write
Configures DTE signals RS-CS delay Enumeration: 'longDelay': 2, 'shortDelay': 1.
                     adDSUDPprovTest 1.3.6.1.4.1.664.2.8.3.3
                         adDSUDPtestTimeout 1.3.6.1.4.1.664.2.8.3.3.1 integer read-write
Configures test timeout in seconds
                         adDSUDPtestRdlCfg 1.3.6.1.4.1.664.2.8.3.3.2 integer read-write
Enables/Disables response to Remote Digital Loopback Enumeration: 'enable': 1, 'disable': 2.
                     adDSUDPprovDial 1.3.6.1.4.1.664.2.8.3.4
                         adDSUDPDialStored1 1.3.6.1.4.1.664.2.8.3.4.1 displaystring read-write
Edit or View stored Dial Location 1
                         adDSUDPDialStored2 1.3.6.1.4.1.664.2.8.3.4.2 displaystring read-write
Edit or View stored Dial Location 2
                         adDSUDPDialStored3 1.3.6.1.4.1.664.2.8.3.4.3 displaystring read-write
Edit or View stored Dial Location 3
                         adDSUDPDialStored4 1.3.6.1.4.1.664.2.8.3.4.4 displaystring read-write
Edit or View stored Dial Location 4
                         adDSUDPDialStored5 1.3.6.1.4.1.664.2.8.3.4.5 displaystring read-write
Edit or View stored Dial Location 5
                         adDSUDPDialStored6 1.3.6.1.4.1.664.2.8.3.4.6 displaystring read-write
Edit or View stored Dial Location 6
                         adDSUDPDialStored7 1.3.6.1.4.1.664.2.8.3.4.7 displaystring read-write
Edit or View stored Dial Location 7
                         adDSUDPDialStored8 1.3.6.1.4.1.664.2.8.3.4.8 displaystring read-write
Edit or View stored Dial Location 8
                         adDSUDPDialStored9 1.3.6.1.4.1.664.2.8.3.4.9 displaystring read-write
Edit or View stored Dial Location 9
                         adDSUDPDialStored10 1.3.6.1.4.1.664.2.8.3.4.10 displaystring read-write
Edit or View stored Dial Location 10
                         adDSUDPAutoAnswer 1.3.6.1.4.1.664.2.8.3.4.11 integer read-write
Enables/Disables automatic answer of incoming calls Enumeration: 'enable': 1, 'disable': 2.
                 adDSUDPperform 1.3.6.1.4.1.664.2.8.4
                     adDSUDPds0IntervalTable 1.3.6.1.4.1.664.2.8.4.2 no-access
The DS0 Interval Table.
                         adDSUDPds0IntervalEntry 1.3.6.1.4.1.664.2.8.4.2.1 no-access
An entry in the DS0 Interval Table.
                             adDSUDPds0IntervalIndex 1.3.6.1.4.1.664.2.8.4.2.1.1 integer read-only
The index value which uniquely identifies the DS0 interface to which this entry is applicable.
                             adDSUDPds0IntervalNumber 1.3.6.1.4.1.664.2.8.4.2.1.2 integer read-only
A number between 1 and 97, where 1 is the current accumulating 15 minute interval and 2-97 are completed 15 minute intervals. 2 is the most recent completed interval and 97 is the least recent completed 15 minute interval (assuming that all 97 intervals are valid).
                             adDSUDPds0IntervalUASs 1.3.6.1.4.1.664.2.8.4.2.1.3 counter read-only
The number of Unavailable Seconds encountered by a DS0 interface in one of the 97, individual 15 minute, intervals.
                     adDSUDPds0DailyTable 1.3.6.1.4.1.664.2.8.4.3 no-access
The DS0 Daily table.
                         adDSUDPds0DailyEntry 1.3.6.1.4.1.664.2.8.4.3.1 no-access
An entry in the DS0 Daily table.
                             adDSUDPds0DailyIndex 1.3.6.1.4.1.664.2.8.4.3.1.1 integer read-only
The index value which uniquely identifies the DS0 interface to which this entry is applicable.
                             adDSUDPds0DailyNumber 1.3.6.1.4.1.664.2.8.4.3.1.2 integer read-only
A number between 1 and 7, where 1 is the current accumulating Daily Interval and 2-7 are the completed Daily Intervals. 2 is the most recent completed Daily Interval and 7 is the least recent completed Daily Interval (assuming that all 7 Daily Intervals are valid).
                             adDSUDPds0DailyUASs 1.3.6.1.4.1.664.2.8.4.3.1.3 counter read-only
The number of Unavailable Seconds encountered by a DS0 interface in one of the 7 Daily Intervals.
                             adDSUDPds0DailyAvail 1.3.6.1.4.1.664.2.8.4.3.1.4 integer read-only
The percentage (times 100) of channel availability encountered by a DS0 interface in one of the 7 Daily Intervals.
                             adDSUDPds0DailyAvgAvail 1.3.6.1.4.1.664.2.8.4.3.1.5 integer read-only
The percentage (times 100) of channel availability averaged over the last 7 days
                     adDSUDPds0IntervalThrsTable 1.3.6.1.4.1.664.2.8.4.4 no-access
The DS0 Interval Threshold Table.
                         adDSUDPds0IntervalThrsEntry 1.3.6.1.4.1.664.2.8.4.4.1 no-access
An entry in the DS0 Threshold Table.
                             adDSUDPds0IntervalThrsIndex 1.3.6.1.4.1.664.2.8.4.4.1.1 integer read-only
The index value which uniquely identifies the DS0 interface to which this entry is applicable.
                             adDSUDPds0IntervalThrsUASs 1.3.6.1.4.1.664.2.8.4.4.1.2 integer read-write
The DS0 performance monitor Threshold Value for the 15 minute Unavailable Seconds parameter. The default value is 1, which equates to approximately 99.9% Availability for a 15 minute Interval.
                     adDSUDPds0DailyThrsTable 1.3.6.1.4.1.664.2.8.4.5 no-access
The DS0 Daily Threshold Table.
                         adDSUDPds0DailyThrsEntry 1.3.6.1.4.1.664.2.8.4.5.1 no-access
An entry in the DS0 Threshold Table.
                             adDSUDPds0DailyThrsIndex 1.3.6.1.4.1.664.2.8.4.5.1.1 integer read-only
The index value which uniquely identifies the DS0 interface to which this entry is applicable.
                             adDSUDPds0DailyThrsUASs 1.3.6.1.4.1.664.2.8.4.5.1.2 integer read-write
The DS0 performance monitor Threshold Value for the Daily Unavailable Seconds parameter. The default value is 86, which equates to approximately 99.9% Availability for a Daily Interval.
                             adDSUDPds0DailyThrsAvail 1.3.6.1.4.1.664.2.8.4.5.1.3 integer read-write
The DS0 performance monitor Threshold Value for the percentage channel Availability parameter. The default value is 9950 (% times 100), which equates to 99.5% Availability for a Daily Interval.
                     adDSUDPds0AlertTable 1.3.6.1.4.1.664.2.8.4.6 no-access
The DS0 Performance Monitor Alert Table
                         adDSUDPds0AlertEntry 1.3.6.1.4.1.664.2.8.4.6.1 no-access
An entry in the DS0 PM Alert Table
                             adDSUDPds0AlertIndex 1.3.6.1.4.1.664.2.8.4.6.1.1 integer read-only
The index value which uniquely identifies the DS0 PM interface to which this entry is applicable.
                             adDSUDPds0AlertStatus 1.3.6.1.4.1.664.2.8.4.6.1.2 integer read-only
This bit map variable indicates Threshold Crossing Events for DS0 performance monitored parameters. When a parameter exceeds its threshold value, the parameter's bit is set in this variable. A SNMP trap is generated if the parameter's alert enable bit is set. The alert event bit values are: 1 Interval UAS 2 Daily UAS 4 Daily percent Availability
                             adDSUDPds0AlertEnable 1.3.6.1.4.1.664.2.8.4.6.1.3 integer read-write
This bit map variable enables changes in the DS0 PM Alert Status to generate a SNMP Trap. The alert enable bit values are: 1 Interval UAS 2 Daily UAS 4 Daily percent Availability
                 adDSUDPalarm 1.3.6.1.4.1.664.2.8.5
                     adDSUDPAlarmStatus 1.3.6.1.4.1.664.2.8.5.1 integer read-only
This bit map variable indicates changes in the DSUDP status. When a status bit changes state, the the corresponding bit is set in this variable. The alarm event bit values are: 1 No Alarm 2 0 4 0 8 Self diagnostics failed 16 OOS/OOF from network 32 DSUDP Loopback 64 Channel Loopback 128 OCU Loopback
                     adDSUDPAlarmMajor 1.3.6.1.4.1.664.2.8.5.2 integer read-only
A bit mask to select items of the AlarmStatus which represent a Major Alarm
                     adDSUDPAlarmMinor 1.3.6.1.4.1.664.2.8.5.3 integer read-only
A bit mask to select items of the AlarmStatus which represent a Minor Alarm
                     adDSUDPAlarmAlert 1.3.6.1.4.1.664.2.8.5.4 integer read-only
A bit mask to select items of the AlarmStatus which represent an Alert Alarm
                     adDSUDPAlarmInfo 1.3.6.1.4.1.664.2.8.5.5 integer read-only
A bit mask to select items of the AlarmStatus which represent an Info Alarm
                     adDSUDPAlarmEnable 1.3.6.1.4.1.664.2.8.5.6 integer read-write
This bit map variable enables changes in the DSUDP Alarm Status to generate a SNMP Trap. The alarm enable bit values are: 1 0 2 0 4 0 8 Self diagnostics failed 16 OOS/OOF from network 32 DSUDP Loopback 64 Channel Loopback 128 OCU Loopback
                 adDSUDPtest 1.3.6.1.4.1.664.2.8.6
                     adDSUDPTestCmd 1.3.6.1.4.1.664.2.8.6.1 integer read-write
A SET performs the selected test Enumeration: 'doDTEOnly': 8, 'doTestPatternOnly': 5, 'doDTEAndLoop': 6, 'doSelfTest': 10, 'doRTTest': 7, 'doLocalDigital': 2, 'doRemoteLoopback': 3, 'doRemoteLoopbackPtrn': 4, 'doDTEAndPtrn': 9, 'noTest': 1.
                     adDSUDPTestStatus 1.3.6.1.4.1.664.2.8.6.2 integer read-only
Current test status Enumeration: 'remoteConfigMaster': 5, 'remoteTestFromCO': 12, 'localLoopFromCO': 11, 'remoteLoop': 7, 'remoteConfigSlave': 6, 'localAnalogLoopPtrn': 9, 'localAnalogLoop': 2, 'remoteLoopPtrn': 8, 'loopAndDTE': 4, 'testPattern': 10, 'remoteDigitalLoop': 13, 'localLoopRT': 3, 'noTest': 1.
                     adDSUDPTestErrors 1.3.6.1.4.1.664.2.8.6.3 integer read-write
This variable accumulates errors for the active test pattern. A SET operation will clear the error count.
                     adDSUDPTestRxPattern 1.3.6.1.4.1.664.2.8.6.4 integer read-only
Receive test pattern status Enumeration: 'patternSync': 3, 'noSync': 2, 'noTest': 1.
                     adDSUDPSelfDiagnostics 1.3.6.1.4.1.664.2.8.6.5 integer read-only
Current Self Test status Enumeration: 'failedEEPROM': 3, 'inTest': 1, 'failedBERT': 6, 'failedSRAM': 4, 'selfTestPass': 2, 'failedChecksum': 5.
                     adDSUDPTestTxPattern 1.3.6.1.4.1.664.2.8.6.6 integer read-write
SETs default transmit test pattern Enumeration: 'ptrnStress2': 4, 'ptrn511': 2, 'ptrnStress3': 5, 'ptrn2047': 1, 'ptrnStress1': 3, 'ptrnStress4': 6.
                     adDSUDPInjectError 1.3.6.1.4.1.664.2.8.6.7 integer read-write
SET injects one error into active test pattern
                 adDSUDPstatus 1.3.6.1.4.1.664.2.8.7
                     adDSUDPStatusEIA 1.3.6.1.4.1.664.2.8.7.1 integer read-only
Bit map status of Primay DTE EIA interface signals (off = 0, on = 1), where bit positions are: 1 RI 2 RD 4 SD 8 CD 16 CS 32 RS 64 SR 128 TR
                     adDSUDPStatusConnector 1.3.6.1.4.1.664.2.8.7.2 integer read-only
The jumper selected DTE interface connector on DSUDP Enumeration: 'connectorEIA232': 2, 'connectorV35': 1.
                     adDSUDPMode 1.3.6.1.4.1.664.2.8.7.3 integer read-only
Current mode of DSUDP Enumeration: 'incomingCall': 2, 'command': 5, 'idle': 1, 'data': 4, 'dialing': 3.
                     adDSUDPLedStatus 1.3.6.1.4.1.664.2.8.7.4 integer read-only
This variable contains bit encoded values for LED status (0=off, 1=on): 1 IDL 2 ALM 4 TST 8 ERR
                 adDSUDPcall 1.3.6.1.4.1.664.2.8.8
                     adDSUDPDialStored 1.3.6.1.4.1.664.2.8.8.1 integer read-write
Dials the stored number in register 1-10
                     adDSUDPManualDial 1.3.6.1.4.1.664.2.8.8.2 displaystring read-write
A SET dials the input command string
                     adDSUDPAnswerCall 1.3.6.1.4.1.664.2.8.8.3 integer read-write
A SET answers an incoming call
                     adDSUDPHangUp 1.3.6.1.4.1.664.2.8.8.4 integer read-write
A SET commands the DSUDP to go on-hook