ADTRAN-ATLAS-T1-MIB: View SNMP OID List / Download MIB

VENDOR: ADTRAN


 Home MIB: ADTRAN-ATLAS-T1-MIB
Download as:   
SNMPv2-CONF, ADTRAN-ATLAS-MODULE-MIB, IF-MIB, SNMPv2-SMI, ADTRAN-ATLAS-UNIT-MIB, RFC1406-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 adtran 1.3.6.1.4.1.664
         adMgmt 1.3.6.1.4.1.664.2
             adATLASmg 1.3.6.1.4.1.664.2.154
                     adGenATLASmg 1.3.6.1.4.1.664.2.154.1
                         adATLAST1mg 1.3.6.1.4.1.664.2.154.1.9
                             adATLAST1IfNumber 1.3.6.1.4.1.664.2.154.1.9.1 integer read-only
The number of T1 ports (regardless of their current state) present on this system.
                             adATLAST1IfTable 1.3.6.1.4.1.664.2.154.1.9.2 no-access
The Atlas T1 Interface Status Table
                                 adATLAST1IfEntry 1.3.6.1.4.1.664.2.154.1.9.2.1 no-access
An entry in the Atlas T1 Interface Status Table
                                     adATLAST1IfIndex 1.3.6.1.4.1.664.2.154.1.9.2.1.1 integer read-only
This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.
                                     adATLAST1IfSlotNum 1.3.6.1.4.1.664.2.154.1.9.2.1.2 integer read-only
This variable indicates the slot number of a particular ATLAS module with a T1 interface.
                                     adATLAST1IfPortNum 1.3.6.1.4.1.664.2.154.1.9.2.1.3 integer read-only
This variable indicates the port number of a particular T1 interface on an ATLAS module.
                                     adATLAST1IfAlarmStatus 1.3.6.1.4.1.664.2.154.1.9.2.1.4 integer read-only
This variable shows the status of each alarm by setting a bit. If the bit is set the alarm is active. Multiple bits can be set at one time. Bit # ALARM ------ ----- 0x01 LOS 0x02 Red 0x04 Yellow 0x08 Blue 0x10 DS0
                                     adATLAST1IfRxLevel 1.3.6.1.4.1.664.2.154.1.9.2.1.5 integer read-only
This variable represents the recieved signal strength in dB. Enumeration: 'neg15db': 3, 'neg7pt5db': 2, 'zerodb': 1, 'neg22pt5db': 4.
                                     adATLAST1IfCurrentLOFC 1.3.6.1.4.1.664.2.154.1.9.2.1.6 counter read-only
This variable indicates the value of the loss of frame count for the current 15 minute interval.
                                     adATLAST1IfTotalLOFC 1.3.6.1.4.1.664.2.154.1.9.2.1.7 counter read-only
This variable indicates the value of the loss of frame count for the current 24 hours.
                                     adATLAST1IfResetPRMStats 1.3.6.1.4.1.664.2.154.1.9.2.1.8 integer read-write
This variable resets the performance monitoring statistics for all of the intervals: current, 15 min, and total. Enumeration: 'reset': 1.
                             adATLAST1IfIntervalTable 1.3.6.1.4.1.664.2.154.1.9.3 no-access
The Atlas T1 Interface Interval Performance Table
                                 adATLAST1IfIntervalEntry 1.3.6.1.4.1.664.2.154.1.9.3.1 no-access
An entry in the Atlas T1 Interface Interval Performance Table
                                     adATLAST1IfIntervalIndex 1.3.6.1.4.1.664.2.154.1.9.3.1.1 integer read-only
This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.
                                     adATLAST1IfIntervalNumber 1.3.6.1.4.1.664.2.154.1.9.3.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
                                     adATLAST1IfIntervalLOFC 1.3.6.1.4.1.664.2.154.1.9.3.1.3 counter read-only
The Loss of Frame Count encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                             adATLAST1IfDS0Table 1.3.6.1.4.1.664.2.154.1.9.4 no-access
The Atlas T1 Interface DS0 Table
                                 adATLAST1IfDS0Entry 1.3.6.1.4.1.664.2.154.1.9.4.1 no-access
An entry in the Atlas T1 Interface DS0 Table
                                     adATLAST1IfDS0Index 1.3.6.1.4.1.664.2.154.1.9.4.1.1 integer read-only
This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.
                                     adATLAST1IfDS0Status 1.3.6.1.4.1.664.2.154.1.9.4.1.2 octet string read-only
This variable shows the overall status of each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 Unallocated 1 Inactive 2 Signalling Mismatch 3 Active B Channel 4 Active D Channel 5 Maintenance 6 Dedicated(Nailed) 7 Offhook-Originate(RBS) 8 Ringing(RBS)-Restart(ISDN) 9 Waiting Dialtone
                                     adATLAST1IfDS0Alarm 1.3.6.1.4.1.664.2.154.1.9.4.1.3 octet string read-only
This variable shows the overall alarm status of each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different alarm states in each octet: Value(decimal) Alarm -------------- ------ 0 No Alarm 1 D Channel Alarm 2 Frame Alarm 3 TBOP Alarm 4 PPP Alarm
                                     adATLAST1IfDS0RxSignalStatusA 1.3.6.1.4.1.664.2.154.1.9.4.1.4 octet string read-only
This variable shows the status of the receive signal's A bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Port Not Active
                                     adATLAST1IfDS0RxSignalStatusB 1.3.6.1.4.1.664.2.154.1.9.4.1.5 octet string read-only
This variable shows the status of the receive signal's B bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Port Not Active
                                     adATLAST1IfDS0TxSignalStatusA 1.3.6.1.4.1.664.2.154.1.9.4.1.6 octet string read-only
This variable shows the status of the transmit signal's A bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Transparent 3 Port Not Active
                                     adATLAST1IfDS0TxSignalStatusB 1.3.6.1.4.1.664.2.154.1.9.4.1.7 octet string read-only
This variable shows the status of the transmit signal's B bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Transparent 3 Port Not Active
                             adATLAST1TstTable 1.3.6.1.4.1.664.2.154.1.9.5 no-access
The Atlas T1 Test Table
                                 adATLAST1TstEntry 1.3.6.1.4.1.664.2.154.1.9.5.1 no-access
An entry in the Atlas T1 Test Table
                                     adATLAST1TstIndex 1.3.6.1.4.1.664.2.154.1.9.5.1.1 integer read-only
This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table.
                                     adATLAST1TstLocalLpBk 1.3.6.1.4.1.664.2.154.1.9.5.1.2 integer read-write
This variable sets the status of the local loopback for sending test signals. Enumeration: 'none': 1, 'line': 3, 'payload': 2.
                                     adATLAST1TstRemoteLpBk 1.3.6.1.4.1.664.2.154.1.9.5.1.3 integer read-write
This variable sets the status of the remote loopback for sending test signals. Enumeration: 'ansiFDLLine': 3, 'inbandNIU': 5, 'none': 1, 'attInbandLine': 2, 'ansiFDLPayload': 4.
                                     adATLAST1TstRemoteLpBkStatus 1.3.6.1.4.1.664.2.154.1.9.5.1.4 integer read-only
This variable indicates the current remote loopback status. Enumeration: 'remLpUpInProgress': 3, 'remLpUpStarted': 2, 'noRemoteLoops': 1, 'remLpUpTimeout': 4, 'remLpDwnDone': 8, 'remLpDwnInProgress': 7, 'remLpUpDone': 5, 'remLpDwnStarted': 6.
                                     adATLAST1TstPattern 1.3.6.1.4.1.664.2.154.1.9.5.1.5 integer read-write
This variable sets the pattern to be sent for testing. Enumeration: 'none': 1, 'allOnes': 2, 'allZeros': 3, 'qRSS': 4.
                                     adATLAST1TstPatternSync 1.3.6.1.4.1.664.2.154.1.9.5.1.6 integer read-only
This variable shows whether there is sync between transmitting and recieving the test pattern. Enumeration: 'synced': 1, 'noSync': 2.
                                     adATLAST1TstPatternSyncLost 1.3.6.1.4.1.664.2.154.1.9.5.1.7 integer read-only
This variable shows whether sync has been lost since it was last cleared. Enumeration: 'syncLost': 1, 'syncNotLost': 2.
                                     adATLAST1TstPatternESs 1.3.6.1.4.1.664.2.154.1.9.5.1.8 counter read-only
This variable shows the amount of errored seconds since it was last cleared.
                                     adATLAST1TstPatternBESs 1.3.6.1.4.1.664.2.154.1.9.5.1.9 counter read-only
This variable shows the amount of bursty errored seconds since it was last cleared.
                                     adATLAST1TstPatternSESs 1.3.6.1.4.1.664.2.154.1.9.5.1.10 counter read-only
This variable shows the amount of severely errored seconds since it was last cleared.
                                     adATLAST1TstClearResults 1.3.6.1.4.1.664.2.154.1.9.5.1.11 integer read-write
This variable is used to clear the results of the test. Enumeration: 'clear': 1.
                                     adATLAST1TstInjectError 1.3.6.1.4.1.664.2.154.1.9.5.1.12 integer read-write
This variable is used to inject an error in the test pattern. Enumeration: 'inject': 1.
                       adATLAST1RxYellowActive 1.3.6.1.4.1.664.2.1540.15400900
This trap indicates a yellow alarm is being received.
                       adATLAST1RxYellowInActive 1.3.6.1.4.1.664.2.1540.15400901
This trap indicates a yellow alarm is no longer being received.
                       adATLAST1RxAISActive 1.3.6.1.4.1.664.2.1540.15400902
This trap indicates an alarm indication signal (AIS) is being received.
                       adATLAST1RxAISInActive 1.3.6.1.4.1.664.2.1540.15400903
This trap indicates an alarm indication signal (AIS) is no longer being received.
                       adATLAST1RedAlarmActive 1.3.6.1.4.1.664.2.1540.15400904
This trap indicates a red alarm is active.
                       adATLAST1RedAlarmInActive 1.3.6.1.4.1.664.2.1540.15400905
This trap indicates a red alarm is inactive.
                       adATLAST1LOSActive 1.3.6.1.4.1.664.2.1540.15400906
This trap indicates a loss of signal (LOS) is active.
                       adATLAST1LOSInActive 1.3.6.1.4.1.664.2.1540.15400907
This trap indicates a loss of signal (LOS) is inactive.
                       adATLAST1TxAISActive 1.3.6.1.4.1.664.2.1540.15400908
This trap indicates an alarm indication signal (LOS) is being sent.
                       adATLAST1TxAISInActive 1.3.6.1.4.1.664.2.1540.15400909
This trap indicates an alarm indication signal (LOS) is no longer being sent.
                       adATLAST1TxYellowActive 1.3.6.1.4.1.664.2.1540.15400910
This trap indicates a yellow alarm is being sent.
                       adATLAST1TxYellowInActive 1.3.6.1.4.1.664.2.1540.15400911
This trap indicates a yellow alarm is no longer being sent.
                       adATLAST1CurrentES 1.3.6.1.4.1.664.2.1540.15400912
This trap indicates that the current interval errored second threshold has been exceeded.
                       adATLAST1CurrentSES 1.3.6.1.4.1.664.2.1540.15400913
This trap indicates that the current interval severely errored second threshold has been exceeded.
                       adATLAST1CurrentSEFS 1.3.6.1.4.1.664.2.1540.15400914
This trap indicates that the current interval severely errored framing second threshold has been exceeded.
                       adATLAST1CurrentUAS 1.3.6.1.4.1.664.2.1540.15400915
This trap indicates that the current interval unavailable second threshold has been exceeded.
                       adATLAST1CurrentCSS 1.3.6.1.4.1.664.2.1540.15400916
This trap indicates that the current interval controlled slip second threshold has been exceeded.
                       adATLAST1CurrentPCV 1.3.6.1.4.1.664.2.1540.15400917
This trap indicates that the current interval path coding violations threshold has been exceeded.
                       adATLAST1CurrentLES 1.3.6.1.4.1.664.2.1540.15400918
This trap indicates that the current interval line errored second threshold has been exceeded.
                       adATLAST1CurrentLCV 1.3.6.1.4.1.664.2.1540.15400919
This trap indicates that the current interval line code violations threshold has been exceeded.
                       adATLAST1TotalES 1.3.6.1.4.1.664.2.1540.15400920
This trap indicates that the total errored second threshold has been exceeded.
                       adATLAST1TotalSES 1.3.6.1.4.1.664.2.1540.15400921
This trap indicates that the total severely errored second threshold has been exceeded.
                       adATLAST1TotalSEFS 1.3.6.1.4.1.664.2.1540.15400922
This trap indicates that the total severely errored framing second threshold has been exceeded.
                       adATLAST1TotalUAS 1.3.6.1.4.1.664.2.1540.15400923
This trap indicates that the total unavailable second threshold has been exceeded.
                       adATLAST1TotalCSS 1.3.6.1.4.1.664.2.1540.15400924
This trap indicates that the total controlled slip second threshold has been exceeded.
                       adATLAST1TotalPCV 1.3.6.1.4.1.664.2.1540.15400925
This trap indicates that the total path coding violations threshold has been exceeded.
                       adATLAST1TotalLES 1.3.6.1.4.1.664.2.1540.15400926
This trap indicates that the total line errored second threshold has been exceeded.
                       adATLAST1TotalLCV 1.3.6.1.4.1.664.2.1540.15400927
This trap indicates that the total line code violations threshold has been exceeded.