ADIC-SANMGR-PROXY-MIB: View SNMP OID List / Download MIB

VENDOR: QUANTUM CORPORATION


 Home MIB: ADIC-SANMGR-PROXY-MIB
Download as:   
ADIC-INTELLIGENT-STORAGE-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sanmgr_proxy 1.3.6.1.4.1.3764.1.1.400.10
       pathlight 1.3.6.1.4.1.3764.1.1.400.10.10
             agent 1.3.6.1.4.1.3764.1.1.400.10.10.2
                 agentScalarTable 1.3.6.1.4.1.3764.1.1.400.10.10.2.1 no-access
                     agentScalarEntry 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1 no-access
A component entry containing objects for a particular component.
                         paIdentify 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.1 integer read-write
Flash the READY light on the SAN Data Gateway front panel. A non-zero value turns the LED on for the specified number of seconds. Zero turns LED off.
                         paReboot 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.2 reset read-write
Writing a reboot(2) value here causes immediate reboot.
                         paHealthCheckValue 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.3 gauge read-only
Value in percent of health check tests passed.
                         paHealthCheckLevel 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.4 integer read-write
Scrutiny level of health check function. Enumeration: 'interface': 2, 'simpleDevice': 3, 'none': 0, 'system': 1, 'deviceReady': 4.
                         paHealthCheckInterval 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.5 gauge read-write
Health Check interval in minutes.
                         paEvRptLevel 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.6 integer read-write
Used when retrieving Event Log. Events with log level greater than paEvRptLevel are not retrieved. Enumeration: 'information': 3, 'notice': 1, 'warning': 2, 'private': 0.
                         paEventLogLevels 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.7 octet string read-write
Each of 255 event types has an 8-bit level used when reading log. Currently valid LogLevel range is 0-3.
                         paTrapThresholds 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.8 octet string read-write
Each of 255 event types has an 8-bit threshold. When the number of events exceeds the Trap Threshold, a trap is generated and sent to all parties listed in the trap destination table (also under SNMP control) . Threshold 0 means Never Threshold 1 means Always Threshold 2 - 255 means Number of events per 10 minute period
                         paBaudRate 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.9 integer read-write
Serial baud rate for SAN Gateway Service Port. Currently, the Agent does not support baud rate change: the rate is hard-coded to 19200 baud. Enumeration: 'baud9600': 0, 'baud38400': 2, 'baud19200': 1.
                         paLogSize 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.11 gauge read-write
Number of records in entire event log. (Not just current records since boot.)
                         paCommand 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.12 integer read-write
Used for issuing command to SNMP agent. Enumeration: 'doHealthCheck': 8, 'logModeAbsolute': 7, 'clear': 4, 'logModeCurrent': 6, 'removeFile': 5, 'idle': 0, 'snapshot': 1, 'save': 3, 'scroll': 2.
                         paLogBoot 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.13 gauge read-only
Absolute index of first log entry at boot.
                         paLogNCurrent 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.14 gauge read-write
SNMP Get (read) returns number of records since boot subject to viewing level filtering. SNMP Set (write) copies this number of records since boot (subject to level filtering) into a buffer from which records are read. This mode of use is deprecated. The preferred way to get the event log since boot is to read paLogBoot, set paEvRptLevel and do a series of SNMP GetNext calls starting at instance paLogBoot until end of event log MIB table is reached.
                         paLogChronFirst 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.15 gauge read-write
Used to request range of records from paLogChronFirst to paLogChronLast
                         paLogChronLast 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.16 gauge read-write
Used to request range of records from paLogChronFirst to paLogChronLast
                         paLogScroll 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.17 integer read-write
Used to request previous/next range of records event log
                         paLogFilename 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.18 displaystring read-write
Used to save event log to a file.
                         paEnvironmentState 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.19 integer read-only
Temperature and Voltage Status of SAN Data Gateway: ********************************** (LSB) bit 0 Auxiliary Power bit 1 Main Power bit 2 Temperature Warning bit 3 Temperature Alarm
                         paGatewayFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.20 displaystring read-only
SAN Data Gateway Firmware Revision information.
                         paGatewayHWRev 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.21 displaystring read-only
SAN Data Gateway Hardware Revision information.
                         paSnmpFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.22 displaystring read-only
SNMP Agent Firmware Revision information.
                         paRidTag 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.23 displaystring read-only
SAN Data Gateway RIDTag.
                         paSerialNumber 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.24 displaystring read-only
SAN Data Gateway Serial Number.
                         paServerVersion 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.25 integer read-write
Remote Management software writes Server version information here to customize SNMP Agent behavior.
                         paProductType 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.26 pathlightproduct read-only
Type of SAN device
                         paVPSEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.27 boolean read-only
State of VPS Access Control enable.
                         paLicenseKey 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.28 displaystring read-write
Used to pass feature enabling license keys.
                         paThirdPartyCopyEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.29 boolean read-only
State of Extended 3rd Party Copy enable. Enabled means that a valid license key has been entered for this feature.
                         paVPSStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.30 integer read-write
State of Virtual Private SAN feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. Bit 1 is redundant with MIB var paVPSEnabled. Writing 1 to bit 0 makes VPS active if licensed. Writing 0 to bit 0 makes VPS inactive if licensed.
                         paThirdPartyCopyStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.31 integer read-write
State of Extended 3rd Party Copy feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. Bit 1 is redundant with MIB var paThirdPartyCopyEnabled. Writing 1 to bit 0 makes Third Party Copy active if licensed. Writing 0 to bit 0 makes Third Party Copy inactive if licensed.
                         paCommandControlLUN 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.32 integer read-write
Gateway/Router Command and Control LUN
                         paSanDirectorEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.33 boolean read-only
State of SAN Director Support for this device. To enable, user must write a valid license key to OID paLicenseKey or enter the license key from the service port.
                         paNodeName 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.34 octet string read-only
SAN Gateway Node Name.
                         paVPMStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.35 integer read-write
State of Virtual Private Map feature. bit 0 : active or inactive. bit 1 : licensed or not licensed.
                         paSRSStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.36 integer read-write
State of SAN Replication Services feature. bit 0 : active or inactive. bit 1 : licensed or not licensed.
                         paEthernetType 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.37 displaystring read-only
Current Ethernet Speed.
                         paTrapSequenceNumber 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.38 integer read-only
Sequence number of last trap sent by this SNMP Agent.
                         paSysNodeNameMode 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.39 integer read-write
Algorithm used when computing Fibre Channel World Wide Node Name for each port. If the value is sameForEachPort(0), then the World Wide Node Name is the same for each port and computed based on the World Wide Node Name of the gateway. If the value is differentForEachPort(1), then the World Wide Node Name is different for each port, computed based on the World Wide Port Name for that port. Enumeration: 'differentForEachPort': 1, 'sameForEachPort': 0.
                         paGhostIOTimeToLive 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.40 integer read-write
The amount of time that commands can remain queued in the SNC before being considered stale and discarded. 0 : Never discard (ghost I/O disabled) 1 - 30 : TTL in ticks (60th of a second)
                         paMaxLun 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.41 integer read-only
The maximum LUN value possible.
                         paEVPSEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.42 integer read-write
Bit 0: EVPS active if 1, inactive if 0 Bit 1: EVPS licensed if 1, unlicensed if 0
                         paMaxHostLun 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.43 integer read-only
The number of devices one host can see
                         paAMPStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.44 integer read-write
Status of Automatic Multipath feature. bit 0 : active or inactive. bit 1 : licensed or not licensed.
                         paEnableAllScsiTargets 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.45 integer read-write
Used to Enable/Disable all-scsi-targets. Enumeration: 'enable': 1, 'disable': 0.
                         paHPFStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.46 integer read-write
Bit 0: HPF active if 1, inactive if 0 Bit 1: HPF licensed if 1, unlicensed if 0
                         paSoip2iRescan 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.47 boolean read-write
Writing true(1) here causes SOIP2 initiator to rescan its bus.
                         paSoipiRescan 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.48 boolean read-write
Writing true(1) here causes SOIP initiator to rescan its bus.
                         paFLBStatus 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.49 integer read-write
Status of Load Balancing feature. bit 0 : active or inactive. bit 1 : licensed or not licensed.
                         paSoip2iScanPeriod 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.50 integer read-write
SOIP2 Initiator Scan period in seconds. 0 will disable scan.
                         paCommandFlowLogEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.2.1.1.51 boolean read-only
Returns TRUE iff Command Flow Logging is available. Returns FALSE otherwise.
                 paEventLog 1.3.6.1.4.1.3764.1.1.400.10.10.2.500 no-access
Entry point for the Agent Event Log Table.
                         paEventLogEntry 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1 no-access
                             paIndex 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.1 integer read-only
MIB EventLogEntry Table index.
                             paTime 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.2 timeticks read-only
Time stamp (since boot).
                             paProducer 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.3 integer read-only
Numeric identifier for this event's producer.
                             paEventClass 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.4 integer read-only
Numeric identifier for this event's class.
                             paEventCode 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.5 integer read-only
Numeric code for this event.
                             paSeq 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.6 integer read-only
Sequence number (relative record number) since boot.
                             paEventVars 1.3.6.1.4.1.3764.1.1.400.10.10.2.500.1.7 displaystring read-only
Text description of event.
             devices 1.3.6.1.4.1.3764.1.1.400.10.10.3
                 pdDevices 1.3.6.1.4.1.3764.1.1.400.10.10.3.1 no-access
Pathlight Physical Device Group *********************************** Each device attached to the Gateway has an entry here.
                     pdDevEntry 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1 no-access
                         pdIndex 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.1 integer read-only
MIB table index
                         pdUID 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.2 displaystring read-only
Universal Identifier
                         pdType 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.3 devicetype read-only
Device Type i.e. disk/tape/cd etc.
                         pdVendor 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.4 displaystring read-only
Device Vendor
                         pdProduct 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.5 displaystring read-only
Device Product Identifier
                         pdBlockSize 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.6 integer read-only
Block size in Bytes
                         pdCapacity 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.7 gauge read-only
Capacity in BLOCKS (see pdBlockSize)
                         pdAccess 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.8 integer read-only
                         pdRemovable 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.9 boolean read-only
Is device removable ?
                         pdStatus 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.10 pltstatus read-only
Device Status
                         pdSpeed 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.11 integer read-only
Device Speed in MBytes/second
                         pdWidth 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.12 integer read-only
Data path width in bits
                         pdSerial 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.13 displaystring read-only
Device Serial Number
                         pdIdentify 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.14 integer read-write
Number of seconds to flash identifying LED. Write here to flash LED on device if supported by Gateway and device. Zero turns LED off.
                         pdInterfaceType 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.15 interface read-only
This device's type of communication interface.
                         pdBus 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.16 integer read-only
SCSI bus number
                         pdId 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.17 integer read-only
SCSI Address ID
                         pdLun 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.18 integer read-only
SCSI Logical Unit Number.
                         pdCtlrIndex 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.19 integer read-only
Index of this device's controller in the Controllers MIB table and type-specific controller tables
                         pdHWRev 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.20 displaystring read-only
Device hardware revision number/identifier
                         pdFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.21 displaystring read-only
Device firmware revision number/identifier
                         pdReset 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.22 reset read-write
Generic device reset if supported. Write reset(1) here to reset device if supported by Gateway firmware and device.
                         pdStatusBits 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.23 integer read-only
Device status bits as per SCSI spec.
                         pdScsiAnsiLevel 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.24 scsiansilevel read-only
Device SCSI level.
                         pdTargetLun 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.25 integer read-only
This target device's Logical Unit Number as seen from attached host.
                         pdIpAddress 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.26 ipaddress read-only
This target device's IP Address if applicable. In case of SAN Gateway or Router, this information is used to allow arbitrary drill-down capability.
                         pdAltVendor 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.27 displaystring read-only
Device alternate Vendor
                         pdAltProduct 1.3.6.1.4.1.3764.1.1.400.10.10.3.1.1.28 displaystring read-only
Device alternate Product Identifier
             controllers 1.3.6.1.4.1.3764.1.1.400.10.10.4
                 pcControllers 1.3.6.1.4.1.3764.1.1.400.10.10.4.1 no-access
Pathlight Controller Group ******************************* All controllers installed in the SAN Data Gateway have an entry here AND a parallel entry in the controller-type specific table (Fibre Channnel, SSA, or SCSI).
                     pcCtlrEntry 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1 no-access
                         pcIndex 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.1 integer read-only
MIB Table index.
                         pcType 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.2 interface read-only
Communication Interface type.
                         pcVendorId 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.3 vendoridint read-only
Integer vendor ID for this controller.
                         pcProductId 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.4 integer read-only
Vendor's integer ID for this controller.
                         pcRevision 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.5 displaystring read-only
Revision information for this controller. See also pcHWRev and pcFWRev.
                         pcSubVendor 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.6 integer read-only
Integer sub-vendor ID for this controller.
                         pcSubProduct 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.7 integer read-only
Vendor's integer sub-product ID for this controller.
                         pcMaxBurst 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.8 integer read-write
Maximum burst transfer rate in MBytes/second
                         pcLatency 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.9 integer read-write
Latency Timer in Clock Ticks.
                         pcIdentify 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.10 integer read-write
Reserved for flashing identifying LED on device.
                         pcPCIBus 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.11 integer read-only
PCI Bus number in SAN Data Gateway for this controller.
                         pcPCIDev 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.12 integer read-only
PCI device number in SAN Data Gateway for this controller.
                         pcPCIFunc 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.13 integer read-only
PCI Function number in SAN Data Gateway for this contoller.
                         pcReset 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.14 reset read-write
Generic controller reset variable. Not supported for all controller types.
                         pcRescan 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.15 boolean read-write
Writing true(1) here causes controller to rescan its bus if rescan is supported for this controller type.
                         pcLED 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.16 octet string read-only
Is LED on?
                         pcHWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.17 displaystring read-only
Hardware revision for this controller.
                         pcFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.18 displaystring read-only
Firmware revision for this controller
                         pcPCISlot 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.19 integer read-only
Location of Channel Card on PCI bus
                         pcPMCSlot 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.20 integer read-only
Location of Card: PMC 1, 2 or 3. 0=> Not a PMC card
                         pcPCIClass 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.21 octet string read-only
Device class code as per PCI specification.
                         pcSplitMode 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.22 boolean read-write
Enable/Disable Split Mode for this controller.
                         pcChannelMask 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.23 gauge read-write
Specifies access permissions for this initiator in bits 0 through 18 ************************************************* -* SCSI Channels *- Bit 0 => Is access DISALLOWED to SCSI channel 1 ? Bit 1 => Is access DISALLOWED to SCSI channel 2 ? Bit 2 => Is access DISALLOWED to SCSI channel 3 ? Bit 3 => Is access DISALLOWED to SCSI channel 4 ? -* Ultra SCSI Channels *- Bit 4 => Is access DISALLOWED to Ultra SCSI channel 1 ? Bit 5 => Is access DISALLOWED to Ultra SCSI channel 2 ? Bit 6 => Is access DISALLOWED to Ultra SCSI channel 3 ? Bit 7 => Is access DISALLOWED to Ultra SCSI channel 4 ? Bit 8 => Is access DISALLOWED to Ultra SCSI channel 5 ? Bit 9 => Is access DISALLOWED to Ultra SCSI channel 6 ? -* Fibre Channel *- Bit 10 => Is access DISALLOWED to Fibre Channel 1 ? Bit 11 => Is access DISALLOWED to Fibre Channel 2 ? Bit 12 => Is access DISALLOWED to Fibre Channel 3 ? Bit 13 => Is access DISALLOWED to Fibre Channel 4 ? Bit 14 => Is access DISALLOWED to Fibre Channel 5 ? Bit 15 => Is access DISALLOWED to Fibre Channel 6 ? -* SSA Channels *- Bit 16 => Is access DISALLOWED to SSA channel 1 ? Bit 17 => Is access DISALLOWED to SSA Channel 2 ? Bit 18 => Is access DISALLOWED to SSA Channel 3 ?
                         pcPortHostType 1.3.6.1.4.1.3764.1.1.400.10.10.4.1.1.24 displaystring read-write
Host type for this port. Used if VPS is not enabled.
                 pcFCCtlrs 1.3.6.1.4.1.3764.1.1.400.10.10.4.2 no-access
Entry point for Fibre Channel Controller Device Group ****************************************************** This table parallels the Controller Table: a Fibre Channel controller with pcIndex N in the controller table appears here as index N as well, and in general there are rows in this table which are empty.
                     fcCtlrEntry 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1 no-access
                         fcStatus 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.1 fcstatus read-only
Status of the Fibre Channel Controller
                         fcMaxSpeed 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.2 gauge read-only
Maximum Transfer Speed in MBytes per second.
                         fcWWID 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.3 displaystring read-only
World Wide Identifier for this Fibre Channel Controller.
                         fcFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.4 displaystring read-only
Firmware revision number/identifier for this Fibre Channel Controller.
                         fcHWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.5 displaystring read-only
Hardware revision number/identifier for this Fibre Channel Controller.
                         fcLoopID 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.6 integer read-write
Fibre Channel Loop ID. soft = -1
                         fcFrameSize 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.7 integer read-write
Fibre Channel frame size.
                         fcPortType 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.8 fibreport read-write
Fibre Channel Port Type
                         fcMedia 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.9 fibremedia read-only
Media type for this Fibre Channel Controller
                         fcSerialNumber 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.10 displaystring read-only
Serial Number for this Fibre Channel Controller.
                         fcLoopIDMode 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.11 fibreloopidmode read-only
Fibre Channel Loop ID mode (soft or hard)
                         fcALPhysicalAddress 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.12 integer read-only
Arbitrated Loop Physical Address (ALPA)
                         fcPortMode 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.13 fibreportmode read-write
Fibre Channel Port Mode.
                         fcConnectionOptions 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.14 fibreconnoptions read-write
Connection options for ISP2200 FC chip. Values 4 - 8 are reserved.
                         fcCtlrChipType 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.15 integer read-only
Type of Fibre Channel controller chip. Valid types are 2100 , 2200 for QLogic ISP2100 and ISP2200 chips.
                         fcTapeFeature 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.16 boolean read-only
Status of Fibre Channel Tape Specification support. true means this controller supports FC Tape false means this controller does not support FC Tape
                         fcHardID 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.17 integer read-write
Fibre Channel Hard ID, the preferred loop ID for this controller. Even if the controller is in Hard Loop ID mode, the actual loop ID is not guaranteed to be fcHardID.
                         fcCurrentSpeedSetting 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.18 integer read-write
Speed in Gb/sec. 0: Auto, 1: 1Gb, 2: 2Gb
                         fcCurrentSpeed 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.19 integer read-only
Current Speed Indicator Gb/sec.
                         fcFrameBufferSize 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.20 integer read-only
Fibre Channel Frame Buffer Size
                         fcLinkFailureCount 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.21 integer read-only
Fibre Channel Link Failure Count
                         fcLossSyncCount 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.22 integer read-only
Fibre Channel Loss of Sync Count
                         fcLossSignalCount 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.23 integer read-only
Fibre Channel Loss of Signal Count
                         fcProtocolErrorCount 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.24 integer read-only
Fibre Channel Primitive Sequence Protocol Error Count
                         fcInvalidTxWordCount 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.25 integer read-only
Fibre Channel Invalid Transmission Word Count
                         fcInvalidCRCCount 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.26 integer read-only
Fibre Channel Invalid CRC Count
                         fcWWNodeName 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.27 displaystring read-only
The World Wide Node Name for this Fibre Channel Controller. The Node Name for this port may computer strictly on the World Wide Node Name for the gateway, or on a per port basis which uses the World Wide Port Name (fcWWID), thus giving each port a different Node Name. See paSysNodeNameMode to get or set which algorithm is in use.
                         fcPortID 1.3.6.1.4.1.3764.1.1.400.10.10.4.2.1.28 integer read-only
Fibre Channel Port Identifier 24 bit quantity which uniquely identifies the port within the loop or fabric.
                 pcSSACtlrs 1.3.6.1.4.1.3764.1.1.400.10.10.4.3 no-access
Entry point for SSA Controller Device Group **************************************************** This table parallels the Controller Table: an SSA controller with pcIndex N in the controller table appears here as row index N as well, and in general there are rows in this table which are empty.
                     ssaCtlrEntry 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1 no-access
                         ssaStatus1 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.1 pltstatus read-only
Status on port 1 of dual port SSA card
                         ssaStatus2 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.2 pltstatus read-only
Status on port 2 of dual port SSA card
                         ssaSpeed 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.3 integer read-write
SSA transfer speed 80 Mbytes/second or 160 MBytes/second Enumeration: 'ssa160': 2, 'ssa80': 1.
                         ssaUID 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.4 displaystring read-only
Universal Identifier for this SSA Controller.
                         ssaFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.5 displaystring read-only
Firmware revision number/identifier for this SSA controller.
                         ssaMaxTarg 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.6 gauge read-write
Maximum number of targets supported.
                         ssaMaxInit 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.7 gauge read-write
Maximum number of initiators supported.
                         ssaPathAlg 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.8 integer read-write
SSA pathing algorithm. Enumeration: 'default': 0, 'skipInitiators': 1, 'unknown': 2.
                         ssaHWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.9 displaystring read-only
Hardware revision number/identifier for this SSA controller.
                         ssaMasterPriority 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.10 integer read-only
The SSA Master Priority of an SSA node is a number from 0 to 7. SSA initiators elect a master based on this priority. If more than one SSA node has the same priority then the node with the highest UID is elected. Pathlight SSA host adapters default to a Master Priority of 4. SAN Gateway SSA Target adapters default to a priority of 5 to ensure that the Gateway node will be master in a multi-initiator loop. This value should never be set to 7 because this is the priority used to guarantee mastership to a node that is entering Service Mode.
                         ssaSATAQuota 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.11 integer read-only
The SSA SAT Quota A parameter is an 8 bit number that determines 'the maximum number of frames which can be originated from this port before the port is SATisfied and forwards the SAT character. A value of zero means that no SATs are forwarded or issued from this port.'
                         ssaSATBQuota 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.12 integer read-only
The SSA SAT Quota B parameter is an 8 bit number that determines 'the maximum number of frames which this port can originate without forwarding a SAT character. A value of zero means that an infinite number of frames can be sent without being subject to SAT pacing.'
                         ssaSATIQuota 1.3.6.1.4.1.3764.1.1.400.10.10.4.3.1.13 integer read-only
                 pcSCSICtlrs 1.3.6.1.4.1.3764.1.1.400.10.10.4.4 no-access
Entry point for SCSI Controller Device Group **************************************************** This table parallels the Controller Table: a SCSI controller with pcIndex N in the controller table appears here as row index N as well, and in general there are rows in this table which are empty.
                     scsiCtlrEntry 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1 no-access
                         scsiStatus 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.1 pltstatus read-only
Status for this SCSI controller.
                         scsiSpeed 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.2 scsispeed read-write
SCSI Transaction speed.
                         scsiRole 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.3 integer read-write
Is this a Target or an Initiator ? Enumeration: 'initiator': 1, 'target': 0.
                         scsiHostId 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.4 integer read-write
Host ID defaults to 7.
                         scsiMaxSpeed 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.5 scsispeed read-write
Maximum Speed of this SCSI Channel.
                         scsiTerm 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.6 integer read-write
State of internal SCSI bus terminations, if any. Enumeration: 'disabled': 0, 'notPresent': 2, 'enabled': 1.
                         scsiIoCard 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.7 scsicardtype read-only
Type of SCSI controller hardware.
                         scsiMaxIds 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.8 integer read-write
Maximum Number of IDs for this SCSI controller.
                         scsiMaxLuns 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.9 integer read-write
Maximum Number of LUNs for this SCSI controller.
                         scsiMaxWidth 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.10 integer read-only
Maximum transfer width in bits.
                         scsiHWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.11 displaystring read-only
Hardware revision for this SCSI controller.
                         scsiFWRev 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.12 displaystring read-only
Firmware revision for this SCSI controller.
                         scsiResetOnPowerUp 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.13 boolean read-write
Enables/Disables SCSI bus reset upon Gateway power-up for this SCSI controller.
                         scsiMultiInitEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.14 boolean read-write
Enables/Disables multi-initiator support on for this SCSI controller.
                         scsiAlternateHostId 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.15 integer read-write
Alternate Host ID for this SCSI controller. -1 means use automatic.
                         scsiTargetEnabled 1.3.6.1.4.1.3764.1.1.400.10.10.4.4.1.16 boolean read-only
Indicates target ScsiRole support for this SCSI controller.
             notification 1.3.6.1.4.1.3764.1.1.400.10.10.5
                 pnTrapDest 1.3.6.1.4.1.3764.1.1.400.10.10.5.1 no-access
Trap destination Group Table ****************************************** A list of IP addresses to which SNMP Traps are sent in parallel using UDP Port 162.
                     pnTrapDestEntry 1.3.6.1.4.1.3764.1.1.400.10.10.5.1.1 no-access
                         pnIndex 1.3.6.1.4.1.3764.1.1.400.10.10.5.1.1.1 integer read-write
Index into TrapDest table
                         pnIPAddr 1.3.6.1.4.1.3764.1.1.400.10.10.5.1.1.2 ipaddress read-write
IP Address of destination entity to which traps are sent.
                         pnUdpPort 1.3.6.1.4.1.3764.1.1.400.10.10.5.1.1.3 integer read-write
UDP Port on which traps are sent to this entity.
                         pnTrapStyle 1.3.6.1.4.1.3764.1.1.400.10.10.5.1.1.4 integer read-write
Style to be used when building a trap PDU to be sent to this entity. A value of proprietary(1) selects the proprietary format used by the Pathlight SAN Director management application. A value of rfc1215(2) selects the format as described in the RFC 1215 TRAP-TYPE objects included in this MIB document. The default is proprietary(1). Enumeration: 'proprietary': 1, 'rfc1215': 2.
                         pnTrapBroadcastMode 1.3.6.1.4.1.3764.1.1.400.10.10.5.1.1.5 integer read-write
Used to Enable/Disable the broadcasting of traps. Enumeration: 'enable': 1, 'disable': 0.
             panelLED 1.3.6.1.4.1.3764.1.1.400.10.10.6
             paHost 1.3.6.1.4.1.3764.1.1.400.10.10.7
                 hostCommandTable 1.3.6.1.4.1.3764.1.1.400.10.10.7.1 no-access
                     hostCommandEntry 1.3.6.1.4.1.3764.1.1.400.10.10.7.1.1 no-access
An object for issuing host-related commands to the SNC.
                         hostCommand 1.3.6.1.4.1.3764.1.1.400.10.10.7.1.1.1 integer read-write
Used to issue commands to VPS control software. Possible commands are: commitChanges: commits any pending LUN Mapping changes to persistent memory. Enumeration: 'commitChanges': 1.
                 hostInitiator 1.3.6.1.4.1.3764.1.1.400.10.10.7.2 no-access
Attached Host Group Table *************************** List of attached hosts and pertinent information.
                     hostInitiatorEntry 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1 no-access
                         hostIndex 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.1 integer read-write
Index into Host Initiator table
                         hostRowStatus 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.2 integer read-write
Row Status for this row.
                         hostWWName 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.3 displaystring read-write
World Wide name of this Initiator.
                         hostName 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.4 displaystring read-write
Name for this Initiator.
                         hostType 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.5 displaystring read-write
Operating System and other host environment information.
                         hostPortID 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.6 displaystring read-write
                         hostSANConnection 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.7 integer read-only
SAN Connection (1-6) to which this host is connected.
                         hostConnectionType 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.8 interface read-only
Type of data connection (FCAL , etc.)
                         hostITLData 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.9 octet string read-write
ITL Access Control data for this host. 256 possible LUNs with one Byte of data per LUN.
                         hostIPAddr 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.10 ipaddress read-only
IP Address of this host. Host is not required to have an IP address.
                         hostLunType 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.11 hostluntype read-write
The type of this host for EVPS. 8-bit, 16-bit, or volume set
                         hostLunMap 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.12 octet string read-write
EVPS Map data. 256 possible LUNs with two Bytes of data for each lun
                         hostInbandAccess 1.3.6.1.4.1.3764.1.1.400.10.10.7.2.1.13 integer read-write
The in-band access level of the host
             scsiMap 1.3.6.1.4.1.3764.1.1.400.10.10.8
                 scsiMapCommandTable 1.3.6.1.4.1.3764.1.1.400.10.10.8.1 no-access
                     scsiMapCommandEntry 1.3.6.1.4.1.3764.1.1.400.10.10.8.1.1 no-access
An object for issuing VPM-related commands to the SNC.
                         scsiMapCommand 1.3.6.1.4.1.3764.1.1.400.10.10.8.1.1.1 integer read-write
Used to issue commands to SCSI Channel map (VPM) routines.
                 scsiChannelMap 1.3.6.1.4.1.3764.1.1.400.10.10.8.2 no-access
SCSI Channel Device Map Table ****************************** List of devices presented to SCSI attached initiator. The initiator sees a series of (Target ID , LUN ) SCSI targets which are mapped to a logical device identified by a Pathlight assigned LUN.
                     scsiMapEntry 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1 no-access
                         scsiMapRowStatus 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.1 rowstatus read-write
Specifies the state of the row.
                         scsiMapPort 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.2 integer read-only
SCSI port (bus) number for this entry (1 thru 10).
                         scsiMapTid 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.3 integer read-only
SCSI Target ID for this entry.
                         scsiMapLun 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.4 integer read-only
SCSI LUN for this entry.
                         scsiMapAssignedLun 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.5 integer read-write
Pathlight LUN assigned to this entry. This assigned LUN maps to some device connected to the Gateway/Router by some other means (FC, SSA, SCSI, ...).
                         scsiMapComments 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.6 displaystring read-write
User's comments for this entry.
                         scsiMapPdIndex 1.3.6.1.4.1.3764.1.1.400.10.10.8.2.1.7 integer read-only
Index into Pathlight SANMgr MIB Device Table ( pd group ). The Device Table has more detailed information about attached devices.
             deviceMap 1.3.6.1.4.1.3764.1.1.400.10.10.9
                 deviceMapCommandTable 1.3.6.1.4.1.3764.1.1.400.10.10.9.1 no-access
                     deviceMapCommandEntry 1.3.6.1.4.1.3764.1.1.400.10.10.9.1.1 no-access
An object for issuing VPM-related commands to the SNC.
                         deviceMapCommand 1.3.6.1.4.1.3764.1.1.400.10.10.9.1.1.1 integer read-write
Used to issue commands to device map map routines. Enumeration: 'commit': 2, 'winnow': 3, 'clearCopy': 1, 'mapClearDatabase': 4.
                         deviceMapMultipathMode 1.3.6.1.4.1.3764.1.1.400.10.10.9.1.1.2 integer read-write
Used to set the Multipath mode. Enumeration: 'auto': 2, 'single': 0, 'manual': 1.
                         deviceMapRemoveDevice 1.3.6.1.4.1.3764.1.1.400.10.10.9.1.1.3 integer read-write
Used to remove a device from the Device Map given its Device-Id. Warning: This command stops the IO for this device before removing
                         deviceLoadBalancingMode 1.3.6.1.4.1.3764.1.1.400.10.10.9.1.1.4 integer read-write
Used to set the Load Balancing Mode. Enumeration: 'enable': 1, 'disable': 0.
                 dmDeviceMap 1.3.6.1.4.1.3764.1.1.400.10.10.9.2 no-access
Device Map Group *********************************** Each device attached to the Gateway has an entry here. Historical data of devices not presently connected may also appear here.
                     dmDevMapEntry 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1 no-access
                         dmRowStatus 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.1 rowstatus read-write
Row Control Object for this row
                         dmAssignedLun 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.2 integer read-only
Logical Unit Number assigned to this attached device. Range is 0 thru 255.
                         dmType 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.3 interface read-write
Type of device (FC, SCSI, SNA, SSA).
                         dmPort 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.4 integer read-write
SAN Gateway Port to which this device is connected. May be 1 thru 10 for SCSI, 1 thru 6 for Fibre Channel, 1 thru 3 for SSA.
                         dmTargetId 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.5 integer read-write
The Target ID of the attached target device. This is the actual target ID of the device, not fabricated by the Gateway or Router.
                         dmTargetLun 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.6 integer read-write
The Logical Unit Number of the attached target device. This is the actual LUN of the device, not fabricated by the Gateway or Router.
                         dmUid 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.7 octet string read-write
A universally unique identifier for this target device.
                         dmPath 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.8 integer read-only
The Multipath Mode of the device. The mode can only be single(0), manual(1), or auto(1). Enumeration: 'auto': 2, 'single': 0, 'manual': 1.
                         dmSerialNum 1.3.6.1.4.1.3764.1.1.400.10.10.9.2.1.9 displaystring read-only
The Serial Number of the device.
             replication 1.3.6.1.4.1.3764.1.1.400.10.10.10
                   srsDevTable 1.3.6.1.4.1.3764.1.1.400.10.10.10.1 no-access
Entry point for SAN Replication Service Device Group ***************************************************** Each SAN Replication Service Device has an entry in this table
                       srsDevEntry 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1 no-access
                           srsDevId 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.1 integer read-only
Device ID for this SRS Device.
                           srsDevState 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.2 integer read-only
State of this LUN Replicated Device. Enumeration: 'deleted': 4, 'unknown': 0, 'online': 2, 'error': 3, 'initialized': 1.
                           srsDevCommand 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.3 integer read-write
Used to invoke SAN Replication Services API commands. Parameters may be passed in the same SNMP Set varbind list with the srsDevCommand as the last varbind. ********************************************* create(1) - Creates a new SRS Device delete(2) - Deletes an existing SRS Device Enumeration: 'create': 1, 'remove': 2.
                           srsDevAssignedLun 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.4 integer read-write
Assigned LUN of the SAN Replication Service Device's Primary.
                           srsDevMemberCount 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.5 integer read-only
Number of members of this LUN Replicated Device.
                           srsDevMembersOnline 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.6 integer read-only
Number of members online.
                           srsDevFlags 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.7 integer read-write
SCSI device flags for this SAN Replication Service Device.
                           srsDevSizeInBlocks 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.8 gauge read-write
Size in blocks of this SAN Replication Services Device.
                           srsDevBlockSize 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.9 integer read-write
Block size in octets.
                           srsDevPrimary 1.3.6.1.4.1.3764.1.1.400.10.10.10.1.1.10 integer read-write
The Assigned LUN of this SRS Device's Primary.
                   srsMemTable 1.3.6.1.4.1.3764.1.1.400.10.10.10.2 no-access
Entry point for SAN Replication Services Member Group ***************************************************** This table lists the Members of each SRS Device.
                       srsMemEntry 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1 no-access
                           srsMemDeviceId 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.1 integer read-only
Device ID of the SAN Replication Services Device to which this member belongs.
                           srsMemId 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.2 integer read-only
Member ID (index) of this member device.
                           srsMemState 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.3 integer read-only
State of this SAN Replication Services Device Member. Enumeration: 'synchronized': 2, 'unknown': 0, 'synchronizing': 3, 'writeError': 6, 'suspended': 4, 'online': 1, 'offline': 7, 'readError': 5.
                           srsMemCommand 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.4 integer read-write
Used to invoke SAN Replication Services API methods. Parameters may be passed in the same SNMP Set varbind list with the lrmCommand as the last varbind. Enumeration: 'suspend': 2, 'quickSynchronize': 7, 'resume': 3, 'memberAdd': 1, 'remove': 4, 'fullSynchronize': 6, 'memberChange': 8, 'primarySet': 5.
                           srsMemType 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.5 integer read-only
Is this device a primary or secondary member. Enumeration: 'primary': 1, 'secondary': 2.
                           srsMemSyncPoint 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.6 integer read-only
Number of blocks synchronized so far. Used for monitoring synchronization.
                           srsMemAssignedLun 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.7 integer read-write
Assigned LUN for this SRS Member.
                           srsMemReadOptions 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.8 integer read-write
SRS Member read options. Enumeration: 'disabled': 1, 'enabled': 0.
                           srsMemWriteOptions 1.3.6.1.4.1.3764.1.1.400.10.10.10.2.1.9 integer read-write
SRS Member write options. Enumeration: 'asynchronous': 1, 'synchronous': 0.
             envData 1.3.6.1.4.1.3764.1.1.400.10.10.11
                   envDataTable 1.3.6.1.4.1.3764.1.1.400.10.10.11.1 no-access
Entry point for Environmental Data Group ***************************************************** This table lists the attributes of each environmental data.
                       envDataEntry 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1 no-access
                           envDataId 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.1 integer read-only
                           envDataName 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.2 displaystring read-only
Name of this environmental data
                           envNominalLo 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.3 displaystring read-only
Minimum value for Nominal status Warning state occurs if the current value is less than this
                           envNominalHi 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.4 displaystring read-only
Maximum Value for Nominal status Warning state occurs if the current value is greater than this.
                           envWarningLo 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.5 displaystring read-only
Minimum value for Warning status Alarm state occurs if the current value is less than this
                           envWarningHi 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.6 displaystring read-only
Maximum Value for Warning status Alarm state occurs if the current value is greater than this.
                           envCurValue 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.7 displaystring read-only
Current Value.
                           envCurStatus 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.8 displaystring read-only
Current Status: Nominal, Warning, or Alarm.
                           envUnit 1.3.6.1.4.1.3764.1.1.400.10.10.11.1.1.9 displaystring read-only
Unit
             portFailover 1.3.6.1.4.1.3764.1.1.400.10.10.12
                   fcHostPortFailover 1.3.6.1.4.1.3764.1.1.400.10.10.12.1
                       fcHPFPortMappings 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1 no-access
FC Host Port Failover Mapping *********************************** This table consists of port mappings for the FC Host Port Failover
                           fcHPFMapEntry 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1.1 no-access
SNMP table for FC Host Port Failover Mappings
                               fcHPFMapRowStatus 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1.1.1 rowstatus read-write
Row Control Object for this row
                               fcHPFMapVirtualPort 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1.1.2 integer read-write
The virtual port index. Depends on the configuration. Usaually same as phys port index, but 0 if not configured
                               fcHPFMapPrimaryPort 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1.1.3 integer read-write
The physical port index that acts as the default standby
                               fcHPFMapStandbyList 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1.1.4 octet string read-write
The comma seperated list of ports that are configured as standbys for the virtual port, excluding the primary port.
                               fcHPFMapActivePort 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.1.1.5 integer read-write
The physical port thats active on this virtual port
                       fcHPFPhysicalPorts 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2 no-access
FC Host Port Failover Physical Ports *************************************** This table consists of physical port settings for the FC Host Port Failover
                           fcHPFPhysicalPortEntry 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2.1 no-access
SNMP table for FC Host Port Failover Port Settings
                               fcHPFPhysicalPortRowStatus 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2.1.1 rowstatus read-write
Row Control Object for this row
                               fcHPFPhysicalPort 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2.1.2 integer read-only
The physical FC port Index. The range depends on the pathlight model.
                               fcHPFPhysicalPortFailureType 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2.1.3 fchpfportfailtype read-only
If this phys port failed, this field gives the type of failure.Values 0 = None, 1 = Link Down 2 = Link Error
                               fcHPFPhysicalPortCurrentState 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2.1.4 fchpfportstate read-only
The current state of this physical port. The values 0 = Online, 1 = Offline
                               fcHPFPhysicalPortIntervention 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.2.1.5 boolean read-write
Does this physical port require intervention? Values 1 = true, 2 = false
                       fcHPFGlobalTable 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.3 no-access
FC Host Port Failover Global Settings **************************************** This table consists of settings global to the HPF function.
                           fcHPFGlobalEntry 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.3.1 no-access
SNMP table for FC Host Port Failover Global Settings
                               fcHPFLinkDownThreshold 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.3.1.1 integer read-write
Used to set the Link Down threshold in seconds. Only after this delay the failover triggers
                               fcHPFErrorRecoveryMode 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.3.1.2 fchpfrecoverytype read-write
Used to set the global recovery mode for failures that happen due to FC cable errors Values: returnToActive(0), returnToStandby(1), requiresIntervention(2)
                               fcHPFLinkDownRecoveryMode 1.3.6.1.4.1.3764.1.1.400.10.10.12.1.3.1.3 fchpfrecoverytype read-write
Used to set the global recovery mode for failures that happen due to Link Down Errors Values: returnToActive(0), returnToStandby(1), requiresIntervention(2)
             utilityModule 1.3.6.1.4.1.3764.1.1.400.10.10.13
                   utilityModuleTable 1.3.6.1.4.1.3764.1.1.400.10.10.13.1 no-access
Entry point for Utility Module Group *****************************************************
                       utilityModuleEntry 1.3.6.1.4.1.3764.1.1.400.10.10.13.1.1 no-access
                           utilityModuleId 1.3.6.1.4.1.3764.1.1.400.10.10.13.1.1.1 integer read-only
Utility module index.
                           utilityModuleVersion 1.3.6.1.4.1.3764.1.1.400.10.10.13.1.1.2 displaystring read-only
Utility module version identifier.
             trapDefinition 1.3.6.1.4.1.3764.1.1.400.10.10.1000
                         ssaPortUpEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.1
An SSA Port Up Event has occurred.
                         ssaPortDownEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.2
An SSA Port Down Event has occurred.
                         ssaUidAddedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.3
An SSA UID Added Event has occurred.
                         ssaUidRemovedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.4
An SSA UID Removed Event has occurred.
                         ssaWebReconfiguredEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.5
An SSA Web Reconfigured Event has occurred.
                         ssaAsyncErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.6
An SSA Async Error Event has occurred.
                         ssaAdapterEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.7
An SSA Adapter Event has occurred.
                         senseDataEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.8
Sense Data recorded following a check condition. Normally, the host system will request and process sense data, and then perform error recovery.
                         unitAttentionEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.9
A LUN reports a unit attention condition on a non-removable media device.
                         ibfEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.10
An Internal Bus Fault event has occurred.
                         temperatureChangeEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.11
A temperature sensor has reported a change from one of three possible states to a another. The possible states are OK, High, Very High. The display string contained in the varbind paEventVars indicates the initial and final temperature state.
                         timeReferenceEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.12
                         shutdownEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.13
This unit is shutting down as a result of a restart request.
                         diagnosticEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.14
This event is used for diagnostic purposes.
                         configurationEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.15
                         unexpectedScsiInterruptEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.16
A SCSI bus reports an unexpected interrupt.
                         lipResetEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.17
A Fibre Channel interface reports a LIP reset was received from a host.
                         fcSystemErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.18
A Fibre Channel interace reports a system error.
                         fcRequestTransferErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.19
A Fibre Channel interface reports an error processing a request.
                         fcResponseTransferErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.20
A Fibre Channel interface reports an error processing a response.
                         memoryFaultEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.21
Processor memory fault detected.
                         fcLipEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.22
A Fibre Channel interface detected a LIP.
                         fcLoopUpEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.23
A Fibre Channel interface reports loop up.
                         fcLoopDownEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.24
A Fibre Channel interface reports loop down.
                         pciBusParityErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.25
Parity error detected on unit internal PCI bus.
                         pciInterfaceErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.26
Interface error detected on unit internal PCI bus.
                         scsiDeviceAddedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.27
A device has been added to a SCSI bus.
                         scsiBusResetEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.28
A SCSI interface reports a bus reset was detected.
                         deviceAddedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.29
This unit has added a device to its configuration table. Note: This trap is held off until the unit has been up for 60 seconds.
                         deviceRemovedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.30
This unit has removed a device from its configuration table.
                         loggingStartedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.31
Event logging service has started.
                         loggingStoppedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.32
Event logging service has stopped.
                         interfaceBusFaultEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.33
An interface has detected a bus fault. The display string contained in varbind paEventVars contains the details of which interface detected the fault.
                         interfaceDeviceFaultEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.34
An interface has detected a device fault. The display string contained in varbind paEventVars contains the details of which interface detected the fault.
                         scsiUnexpectedDisconnectEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.35
A SCSI interface has reported an unexpected disconnect by a device.
                         scsiParityErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.36
A SCSI interface has detected a parity error on the bus.
                         fcPortDatabaseChangeEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.37
Fibre Channel port databse change detected.
                         ddfMemoryErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.38
An error was detected on the Direct Data Flow memory board.
                         fcDirectoryServerChangeEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.39
The Directory Server on the Fibre Channel fabric has changed.
                         lunLimitExcededEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.40
The maximum LUN limit has been exceded, too many devices connected.
                         fcTransferFailureEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.41
Fibre Channel transfer error.
                         deviceLimitExcededEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.42
The maximum device limit has been exceded, the persistent device map database is full.
                         fcDebugDumpEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.43
A Fibre Channel interface driver has reported a a debug dump.
                         excessiveScsiBusErrorsEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.44
                         memoryScrubberErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.45
                         srsDeviceCreatedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.46
A new SAN Replication Services device has been created
                         srsDeviceOnlineEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.47
A SAN Replication Services device has entered the online state.
                         srsDeviceRemovedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.48
A SAN Replication Services device has been removed (deleted).
                         srsDeviceFailedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.49
A SAN Replication Services device has failed.
                         srsMemberAddedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.50
A new member LUN has been added to a SAN Replication Services device.
                         srsMemberSuspendedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.51
A SAN Replication Services member has been suspended.
                         srsMemberRemovedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.52
A SAN Replication Services member has been removed.
                         srsMemberSyncStartedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.53
A SAN Replication Service member has begun synchronization to the primary member.
                         srsMemberSyncDoneEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.54
A SAN Replication Service member has completed synchronization to the primary member.
                         srsMemberSyncErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.55
An error was detect during synchronization of a SAN Replication Service member to the primary member.
                         srsMemberRetryEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.56
A command issued to a SAN Replication Services member has failed and is being retried.
                         srsMemberErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.57
A command issued to a SAN Replication Services member has resulted in an error.
                         envPowerNominalEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.58
Power has returned to nominal state from a warning or alarm state.
                         envPowerWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.59
Power has entered a warning state from a nominal state (power degrading) or alarm state (power improving).
                         envPowerAlarmEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.60
Power has entered an alarm state.
                         envTemperatureNominalEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.61
Inlet air, outlet air, or I/O processor temperature has returned to nominal state from a warning or alarm state.
                         envInletTemperatureWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.62
Inlet air temperature has entered a warning state from a nominal state (temperature increasing) or an alarm state (temperature decreasing).
                         envInletTemperatureAlarmEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.63
Inlet air temperature has entered an alarm state.
                         envOutletTemperatureWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.64
Outlet air temperature has entered a warning state from a nominal state (temperature increasing) or an alarm state (temperature decreasing).
                         envOutletTemperatureAlarmEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.65
Outlet air temperature has entered an alarm state.
                         envFanNominalEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.66
Fan has entered a nominal state from a fault state.
                         envFanWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.67
Fan has entered a warning range (tachometer fans only).
                         envFanAlarmEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.68
Fan has entered an alarm range (tachometer fans) or is stalled (rotor stall fans).
                         eccMemoryErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.69
Error correcting code memory has detected an error.
                         restartCompleteEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.70
Restart process has completed.
                         firmwareUploadCompleteEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.71
Firmware upload process has completed.
                         maxInitiatorsExceededEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.72
Maximum number of initiators has been exceeded.
                         dataPathFailoverEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.73
                         amemWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.74
Amem memory not properly installed.
                         hostOfflineEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.75
An attached host has been moved to the offline state.
                         hostOnlineEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.76
An attached host has been moved to the online state.
                         hostPortFailoverEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.77
                         hpfRequiresInterventionEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.78
Host port failover requires invention.
                         controllerResetCompletedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.79
The controller indicated in paEventVars has completed its reset sequence. The text format for paEventVars is: NOTICE: FC Controller %d Restart Complete
                         controllerStatusChangeEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.80
The status of the controller indicated in paEventVars has changed. The controller index (pcIndex) and the new status (fcStatus for Fibre Channel, scsiStatus for SCSI) are encoding in paEventVars according to the following format: NOTICE: Controller %d status is %d
                         ethFailoverEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.81
Ethernet Port Filover has occured.
                         memUsageWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.82
Memory usage reached warning level.
                         taskSuspendedWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.83
Task suspended warning.
                         umTaskWatchdogWarningEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.84
Utility module task watchdog warning.
                         dataPathTrespassEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.85
Data path trespass has occurred.
                         deviceListChangedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.86
Target device list changed on an interface.
                         autoLevelStart 1.3.6.1.4.1.3764.1.1.400.10.10.10000.87
Auto Level has begun.
                         autoLevelEnd 1.3.6.1.4.1.3764.1.1.400.10.10.10000.88
Auto Level is done.
                         autoLevelError 1.3.6.1.4.1.3764.1.1.400.10.10.10000.89
Auto Level has got error.
                         corruptNVRAMError 1.3.6.1.4.1.3764.1.1.400.10.10.10000.90
NVRAM corruption detected.
                         powerSupplyOutOfSpecEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.100
The main power supply voltage is out of specified operating range.
                         auxPowerOutOfSpecEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.101
The auxillary power supply voltage is out of specified operating range.
                         newTemperatureChangeEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.102
Temperature change detected since last report. The possible temperature states are OK, High, and Very High.
                         newPciErrorsEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.103
                         newMemoryParityErrorsEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.104
                         pciBusInterfaceErrorEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.105
                         fcInterfaceFailureEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.106
Fibre Channel interface failed Health Check.
                         scsiInterfaceFailureEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.107
SCSI interface failed Health Check.
                         ssaInterfaceFailureEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.108
SSA interface failed Health Check.
                         deviceFailureEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.109
Target device failed Health Check.
                         fcLinkStatusChangeEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.110
Fibre Channel link status has changed.
                         newFcTranferErrorsEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.111
New Fibre Channel transfer errors were detected since last report.
                         envFanEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.112
The health check task has detected a fan running in warning or alarm range.
                         envPowerEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.113
The health check task has detected a power supply running in warning or alarm range.
                         envTemperatureEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.114
The health check task has detected a temperature sensor reporting in warning or alarm range.
                         eccMemoryHealthCheckEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.115
The health check task has detected an ECC memory error.
                         eccMemoryScrubberEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.116
The health check task has detected an ECC memory scrubber event.
                         deviceRecoverEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.118
                         logWillOverwriteEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.150
The event log circular buffer is about to wrap, overwriting the oldest entries.
                         bootCompletedEvent 1.3.6.1.4.1.3764.1.1.400.10.10.10000.4444
This unit has completed its boot sequence and is ready for SNMP communication with management applications. During the time period between the initiation of the boot (or reboot) sequence and the issuing of the bootCompletedEvent trap, certain data objects may not be completely initialized. As such, management applications should not attempt to retrieve data via SNMP until the bootCompletedEvent is issued.