ADH-NETCOM-MIB: View SNMP OID List / Download MIB
VENDOR: ENVIRONMENTAL TECHNOLOGY
| Home | MIB: ADH-NETCOM-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| environmentalTechnology | 1.3.6.1.4.1.32185 |
The Structure of Management Information for Environmental Technology Inc. SNMP devices |
||
| netcom | 1.3.6.1.4.1.32185.2 |
ADH NETCOM |
||
| statusInfo | 1.3.6.1.4.1.32185.2.1 | |||
| allStatuses | 1.3.6.1.4.1.32185.2.1.1 | displaystring | read-only |
Summary: same as objects 2-7, separated by semicolons |
| pressurePSI | 1.3.6.1.4.1.32185.2.1.2 | displaystring | read-only |
Pressure, in PSI or mbar |
| dutycycle | 1.3.6.1.4.1.32185.2.1.3 | displaystring | read-only |
Current duty cycle, in percent; --- if none available |
| statusVars | 1.3.6.1.4.1.32185.2.1.4 | displaystring | read-only |
Summary of the status of the unit. Is always 7 characters Character 1 is super-state: govering whole system, if this unit is a master S=slave (not a master) M=master; N=master but system off line D=director; D=director but system off line master: for redundant systems director: for increasing pumping capability Character 2 is major state: N=normal, S=standby, L=leaky Character 3 is environment: N=normal, C=cold, H=hot Character 4 is canister 1 condition: O=OK (ie dry), F=full (wet), U=unknown, D=dead Character 5 is canister 1 usage: I=idle, U=in use, R=regenerating Character 6 is canister 2 condition, as in character 4 Character 7 is canister 2 usage, as in character 5 |
| temperature | 1.3.6.1.4.1.32185.2.1.5 | displaystring | read-only |
Current temperature, in degrees F or C |
| alarms | 1.3.6.1.4.1.32185.2.1.6 | displaystring | read-only |
Current alarm conditions: is a list of them Each character has a - for no alarm, or an A or W if there is an alarm. A means alarm (serious), W means a warning (not so serious). Severity levels may later change. List of alarms: (later versions may add more): A1: Low pressure A2: High pressure W3: High duty cycle W4: High temperature W5: Low temperature W6: Unused A7: Canister 1 won't heat A8: Canister 1 won't cool A9: Canister 2 won't heat A10: Canister 2 won't cool A11: Unable to pressurize A12: Dew point alarm W13: Compressor timeout (for future use) W14: Communications error A15: Canister 1 thermistor bad A16: Canister 2 thermistor bad A17: Ambient thermistor bad A18: Overpressure A19: Bad calibrations in EEPROM A20: Bad limits in EEPROM A21: Short cycling A22: Pump shut down due to error condition |
| compressorHours | 1.3.6.1.4.1.32185.2.1.7 | displaystring | read-only |
Number of hours that the compressor has been running; resolution is tenths of an hour. |
| majorState | 1.3.6.1.4.1.32185.2.1.8 | integer | read-write |
Major state of the dehydrator. Online: currently pressurizing. Standby: not pressurizing. Leaky: shut down because of inability to pressurize. Enumeration: 'standby': 2, 'leaky': 3, 'online': 1. |
| cycleTime | 1.3.6.1.4.1.32185.2.1.9 | displaystring | read-only |
Time of last duty cycle in seconds; 0.0 means none available |
| paramsInfo | 1.3.6.1.4.1.32185.2.2 | |||
| lowerLimit | 1.3.6.1.4.1.32185.2.2.1 | displaystring | read-only |
The pressure, in PSI or mbar, at which the unit starts to pump |
| upperLimit | 1.3.6.1.4.1.32185.2.2.2 | displaystring | read-only |
The pressure, in PSI or mbar, which the unit pressurizes to |
| lowerAlarmLimit | 1.3.6.1.4.1.32185.2.2.3 | displaystring | read-only |
The pressure, in PSI or mbar, below which the unit declares a low pressure alarm |
| upperAlarmLimit | 1.3.6.1.4.1.32185.2.2.4 | displaystring | read-only |
The pressure, in PSI or mbar, above which the unit declares a high pressure alarm |