ADC-FLEXWAVE-URH-MIB: View SNMP OID List / Download MIB

VENDOR: ADC TELECOMMUNICATIONS

Home	MIB: ADC-FLEXWAVE-URH-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, ADC-FWU-URH-TC-MIB, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
adc	1.3.6.1.4.1.2014
flexwave	1.3.6.1.4.1.2014.15
flexwaveurh	1.3.6.1.4.1.2014.15.2
flexwaveURHMibModule	1.3.6.1.4.1.2014.15.2.1			This is the MIB for managing entities associated with FlexWave Prism & InterReach SPECTRUM products for SW Version 8.1
fwuHostUnitObjects	1.3.6.1.4.1.2014.15.2.1.1
fwuHstSystemLevelObjects	1.3.6.1.4.1.2014.15.2.1.1.1
fwuHstSystemLevelInfo	1.3.6.1.4.1.2014.15.2.1.1.1.1
fwuHstGeneral	1.3.6.1.4.1.2014.15.2.1.1.1.1.1
fwuHstNumber	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.1	integer	read-only	Host Number.
fwuHstName	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.2	displaystring	read-write	User defined name of the host unit. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Maximum length of the name 64 characters.
fwuHstUnitReset	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.3	integer	read-write	Use to reset the Host. Do this by changing from normal(0) to reset(1). After the operation has completed the state automatically changes to normal. Enumeration: 'reset': 1, 'normal': 0.
fwuHstBackPlaneRev	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.4	displaystring	read-only	The back plane revision of the Host (It is the three pin version number of the chassis back plane).
fwuHstAlarmStatusSummary	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.5	alarmtype	read-only	Summary of alarm status on the Host.
fwuHstTempMeas	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.6	displaystring	read-only	Host system temperature value in Celsius.
fwuSystemAlarmStatusSummary	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.7	alarmtype	read-only	Summary of alarm status on the System. If there a unit in the system (Host and all remotes) with a fault condition, it will be reflected here. Severity is summarised by the highest severity of the alarms in the system. i.e. If there is at least one Major alarm, the summary will indicate Major Alarm. The severities supported are Major, Minor and OK.
fwuHstSystemDateAndTime	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.9	octet string	read-write	Date and Time settings on the system.
fwuAlarmAck	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.11	integer	read-write	Provision to acknowledgement one or all alarms in the system. Set 0 to acknowledge all alarms or the alarm code (numeric ID) of the alarm to be acknowledged. This is a integer greater than 0. Enumeration: 'acknowledgeAll': 0.
fwuAlarmLevel	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.12	alarmtype	read-write	Alarm status summary of system.
fwuUserCommLinkTest	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.13	integer	read-write	Provision to perform the system test manually. Set the value to 1 to initiate the test. Once started, the test cannot be cancelled. User has to wait for completion. On completion of the test, the value reverts back to 0. Use fwuUserCommLinkTestDartBandType or fwuUserCommLinkTestDartId to provide parameters for the test. Enumeration: 'start': 1, 'inactive': 0.
fwuUserLinkTestStatus	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.14	displaystring	read-only	Provides the status of the System/Link test, once the test has started. Start the test using fwuUserCommLinkTest. Status is reported in the format X;Y where X is the test status (number) and Y is the unit number. The valid values of the test status and their associated meaning. (0) - Test has not started. This is the default value. (1) - Test started. (2,3,4,5,6,7,8,9,10,11,12,13,14) - Test is in progress. (15) - Test completed. (16) - Test Failed.
fwuUserCommLinkTestDartBandType	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.15	bandtype	read-write	Bands on which the system test is to be run. Refer TC BANDType for list. 0 to select all provisioned bands for the test. If a non-zero value is provided here then fwuUserCommLinkTestDartId must be empty. If zero is provided here then fwuUserCommLinkTestDartId may be set to 0 or empty.
fwuUserCommLinkTestDartId	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.16	integer32	read-write	Identify the DARTs on which the system test is to be run. It is the DART slot number on Host unit. Use 0 to select all provisioned DARTs for the test. Other valid values are 1 to 8 and -1. If a non-zero value is provided here then fwuUserCommLinkTestDartBandType must be empty. If zero is provided here then fwuUserCommLinkTestDartBandType may be set to 0 or empty.
fwuClearSysConfig	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.17	integer	read-write	To Clear System Configuration. Change the value from 0 to 1 to clear all the settings on the system. Also, known as Restore To Factory Defaults (RTFD). Enumeration: 'enable': 1, 'disable': 0.
fwuLinkTestLastRuntime	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.19	dateandtime	read-only	Time indicating the most recent execution of System/Link Test.
fwuNTPServerIP	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.20	displaystring	read-write	IP address of NTP Server. Use internet dot-decimal notation when providing the address.
fwuSyncNTPServer	1.3.6.1.4.1.2014.15.2.1.1.1.1.1.21	integer	read-write	Enable synchronization with NTP server. Change the value from 0 to 1 to enable synchronization with the NTP Server. Enumeration: 'enable': 1, 'disable': 0.
fwuHstExt	1.3.6.1.4.1.2014.15.2.1.1.1.1.2
fwuHstMajorContactAlarmOutput	1.3.6.1.4.1.2014.15.2.1.1.1.1.2.1	contacttype	read-only	Host Major contact output port state. Not present, OK and faulted are the supported states.
fwuHstMinorContactAlarmOutput	1.3.6.1.4.1.2014.15.2.1.1.1.1.2.2	contacttype	read-only	Host Minor contact output port state. Not present, OK and faulted are the supported states.
fwuRmtMajorContactAlarmOutput	1.3.6.1.4.1.2014.15.2.1.1.1.1.2.3	contacttype	read-only	Remote Major contact output port state. Not present, OK and faulted are the supported states.
fwuRmtMinorContactAlarmOutput	1.3.6.1.4.1.2014.15.2.1.1.1.1.2.4	contacttype	read-only	Remote Minor contact output port state. Not present, OK and faulted are the supported states.
fwuSystemActiveAlarms	1.3.6.1.4.1.2014.15.2.1.1.1.1.3
fwuSystemActiveAlarmTable	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1		no-access	This table lists all the outstanding (active) alarms in the system. Alarms are removed from this table when the alarm condition is cleared (i.e. When CLEAR is sent out).
fwuSystemActiveAlarmEntry	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1		no-access	Entries for active alarms.
fwuSystemAlarmSequenceNumber	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.1	unsigned32	no-access	The number of the alarm table entry which is defined by this row.
fwuSystemAlarmTrapNodeAddress	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.2	unitid2	read-only	System Node Address, where the alarm originated.
fwuSystemlabel	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.3	displaystring	read-only	The name used to identify the system. Since the Host name is used to identify the system, the Host name is reflected here.
fwuSystemAlarmRmtName	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.4	displaystring	read-only	Name of the unit from which the alarm originated.
fwuSystemAlarmRmtType	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.5	unittype	read-only	Type of the unit from which the alarm originated. fwuSystemAlarmRmtName is the user provided name of this unit.
fwuSystemAlarmModuleType	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.6	moduletype	read-only	Type of the Module from which the alarm originated. e.g SeRF, DART, SFP. To be read with fwuSystemAlarmRmtType. Then, it identifies the module on that (fwuSystemAlarmRmtType) unit.
fwuSystemAlarmModuleNumber	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.7	unsigned32	read-only	Number of the module from which the alarm originated. To be used in conjuction with the object fwuSystemAlarmModuleType. So, if module type indicated DART and module number reported 3, then it means that the alarm originated from the third DART.
fwuSystemAlarmModuleName	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.8	displaystring	read-only	Name of the Module from which the alarm originated. The user provided name of the module identified by fwuSystemAlarmModuleNumber.
fwuSystemAlarmSeverity	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.9	alarmtype	read-only	Severity of the alarm.
fwuSystemAlarmRFBand	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.10	displaystring	read-only	The RF band affected by this alarm condition.
fwuSystemAlarmTimeStamp	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.11	dateandtime	read-only	Time when the alarm is raised.
fwuSystemAlarmCode	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.12	unsigned32	read-only	A positive number which uniquely identifies an alarm.
fwuSystemAlarmHstNbr	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.13	unsigned32	read-only	Number identifying the host in the system.
fwuSystemAlarmAnalogAddress	1.3.6.1.4.1.2014.15.2.1.1.1.1.3.1.1.14	unitid3	read-only	Analog Portion of the node address.
fwuHstSystemLevelTraps	1.3.6.1.4.1.2014.15.2.1.1.1.2
fwuHstModuleMissingFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.2			Missing Host pluggable module.
fwuHstOverTempFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.3			Host Temperature above operating limit.
fwuHstUnderTempFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.4			Host Temperature below operating limit.
fwuHstBTSUnderPowerFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.5			Band specific alarm FLM raised when unit connected to BTS.
fwuHstFLMDownconvertFailureFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.6			Forward Link Monitor (FLM) fault active.
fwuHstRLMUpconvertFailureFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.7			Band specific alarm RLM raised when unit connected to BTS.
fwuHstRLMUpConIndetFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.8			Unable to run RLM due to Host Reverse gain being set too low.
fwuHstIamAliveFault	1.3.6.1.4.1.2014.15.2.1.1.1.2.9			The Host I am alive Trap
fwuHstSERFObjects	1.3.6.1.4.1.2014.15.2.1.1.2
fwuHstSERFInfo	1.3.6.1.4.1.2014.15.2.1.1.2.1
fwuHstSERFGeneral	1.3.6.1.4.1.2014.15.2.1.1.2.1.1
fwuHstSERFLinuxKernelVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.1	displaystring	read-only	Linux Kernel version on host.
fwuHstSERFLinuxBootLoaderVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.2	displaystring	read-only	Boot Loader1 version on host.
fwuHstSERFCompactFlashSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.3	displaystring	read-only	Compact Flash version on host.
fwuHstSERFFPGAVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.4	displaystring	read-only	FPGA version loaded on Host SeRF.
fwuHstSERFPPCSNMPAgentSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.5	displaystring	read-only	SNMP agent version on host.
fwuHstSERFPPCHWMonSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.6	displaystring	read-only	Hardware Monitor process version on host.
fwuHstSERFPPCAPPMonSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.7	displaystring	read-only	Application Monitor process version on host.
fwuHstSERFPPCMATEMonSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.8	displaystring	read-only	Mate Monitor process version on host.
fwuHstSERFPPCENETMonSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.9	displaystring	read-only	Ethernet Monitor process version on host.
fwuHstSERFPPCFPGAMonSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.10	displaystring	read-only	FPGA Monitor process version on host.
fwuHstSERFRIDateCode	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.11	displaystring	read-only	Host SeRF Inventory - Date Code.
fwuHstSERFRIHWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.12	displaystring	read-only	Host SeRF Inventory - Hardware version.
fwuHstSERFRISerialNumber	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.13	displaystring	read-only	Host SeRF Inventory - Serial Number.
fwuHstSERFRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.14	displaystring	read-only	Host SeRF Inventory - TE PartNumber.
fwuHstSERFRIHWGen	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.15	integer	read-only	Host SeRF Hardware Generation. Enumeration: 'secondGeneration': 1, 'firstGeneration': 0.
fwuHstSERFLinuxBootLoaderFirstVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.16	displaystring	read-only	Boot Loader2 version of the host system.
fwuHstpThreadSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.17	displaystring	read-only	The version number of pThread process. If blank then pThread does not run here.
fwuHstSubagentSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.18	displaystring	read-only	The version number of the subagent.
fwuHstWebServerSWVer	1.3.6.1.4.1.2014.15.2.1.1.2.1.1.19	displaystring	read-only	The version number of web server.
fwuHstSERFOptObjects	1.3.6.1.4.1.2014.15.2.1.1.2.1.2
fwuHstSERFOptTable	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1		no-access	This table maintains Information of Host SERF Optical Objects.
fwuHstSERFOptEntry	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1		no-access	Each entry in this table refers to Host SERF Optical objects.
fwuHstSERFOptSFPNumber	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.1	integer32	read-only	SFP Number - Optical Port number.
fwuHstSERFOptSFPName	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.2	displaystring	read-write	User defined name of each Host SFP. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Maximum length of the name 64 characters.
fwuHstSERFOptSFPType	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.3	opticstype	read-only	SFP Type - Optical Port Type. Identifies whether the SFP is short(1)/intermediate(2)/long(3) range. It may also be unidentified (-1).
fwuHstSERFOptSFPTxColor	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.4	integer32	read-only	Wavelength of light used in the SFP (in nanometers).
fwuHstSERFOptRevLaunchPowerMeas	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.5	displaystring	read-only	Value of the optical power, in dBm received at the host.
fwuHstSERFOptFwdLaunchPowerMeas	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.6	displaystring	read-only	Value of the optical power, in dBm transmitted by the host.
fwuHstSERFOptMateName	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.7	displaystring	read-only	Name of Host Mates.
fwuHstSERFIPEnable	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.8	integer	read-only	Indicates whether IP is enabled(1) or not(2). Enumeration: 'iPDisable': 2, 'iPEnable': 1.
fwuHstSERFOptMateId	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.9	unitid2	read-only	Identifier of (companion) mate unit.
fwuHstSERFOptMateSfpId	1.3.6.1.4.1.2014.15.2.1.1.2.1.2.1.1.10	integer32	read-only	SFP slot number used at remote end.
fwuHstSERFTraps	1.3.6.1.4.1.2014.15.2.1.1.2.2
fwuHstSERFSynthAlarmFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.2			Host SeRF synthesizer unlocked.
fwuHstSERFFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.3			Summary of SeRF Synthesizer Unlocked alarm and SeRF FPGA status. The system may not be communicating with the Ethernet Switch. This fault is also precipitated by the I2C Bus Fault.
fwuHstSERFRmtLostFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.4			Remote is not communicating with Host.
fwuHstSERFOptRxBERFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.5			High bit error rate (BER) detected by fiber optic receiver.
fwuHstSERFOptRxNoLightFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.6			No signal detected by optical receiver.
fwuHstSERFOptLaserFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.7			SFP optical transmitter failed.
fwuHstSERFOptOverDriveFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.8			SFP optical receive input power above specification.
fwuHstSERFOptUnderDriveFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.9			SFP optical receive input power below specification.
fwuHstSERFOptIpEnableFault	1.3.6.1.4.1.2014.15.2.1.1.2.2.10			Host SFP IPEnable Fault.
fwuMastClockPriorityLvlConflict	1.3.6.1.4.1.2014.15.2.1.1.2.2.11			More than one Host has the same Master Clock Priority Level. All Hosts in conflict raise the alarm.
fwuHstI2CBus1Fault	1.3.6.1.4.1.2014.15.2.1.1.2.2.12			Indicates an I2C communication problem.
fwuHstI2CBus2Fault	1.3.6.1.4.1.2014.15.2.1.1.2.2.13			Indicates an I2C communication problem.
fwuHstSERFEthPortObjects	1.3.6.1.4.1.2014.15.2.1.1.3
fwuHstSERFEthPortInfo	1.3.6.1.4.1.2014.15.2.1.1.3.1
fwuHstSERFEthPortTable	1.3.6.1.4.1.2014.15.2.1.1.3.1.1		no-access	This table maintains information of Host Ethernet Ports.
fwuHstSERFEthPortEntry	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1		no-access	Each entry in this table refers to Host SERF Ethernet port objects.
fwuHstSERFEthPortNumber	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.1	unsigned32	read-only	A unique identifier for each Ethernet port.
fwuHstSERFEthPortType	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.2	enettype	read-only	An identifier for the type of Ethernet port. The port types are network(1), craft(2) , management(3) , switch(4) , SFP(5). It may be unknown (-1).
fwuHstSERFEthPortRxBytes	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.3	counter64	read-only	Count of the number of recieved bytes at this ethernet port.
fwuHstSERFEthPortRxPkts	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.4	counter64	read-only	The number of packets recieved at this ethernet port.
fwuHstSERFEthPortRxFcsErrors	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.5	counter64	read-only	The number of FCS errors recieved at this ethernet port.
fwuHstSERFEthPortRxBroadcastPkts	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.6	counter64	read-only	The number of broadcast packets recieved at this ethernet port.
fwuHstSERFEthPortRxMulticastPkts	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.7	counter64	read-only	The number of multicast packets at this ethernet port.
fwuHstSERFEthPortRxFragmtdFrames	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.8	counter64	read-only	The number of fragmented frames received at this ethernet port.
fwuHstSERFEthPortRxJabbersFrames	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.9	counter64	read-only	The number of jabber frames received at this ethernet port.
fwuHstSERFEthPortTxByteCounter	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.10	counter64	read-only	The number of bytes transmitted from this ethernet port.
fwuHstSERFEthPortTxPkts	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.11	counter64	read-only	The number of packets transmitted from this ethernet port.
fwuHstSERFEthPortTxBroadcastPkts	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.12	counter64	read-only	The number of broadcast packets transmitted from this ethernet port.
fwuHstSERFEthPortTxMulticastPkts	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.13	counter64	read-only	The number of multicast packets transmitted from this ethernet port.
fwuHstSERFEthPortSFPId	1.3.6.1.4.1.2014.15.2.1.1.3.1.1.1.14	integer32	read-only	Identifies the SFP number to which this ethernet port connects.
fwuHstSERFEthPortTraps	1.3.6.1.4.1.2014.15.2.1.1.3.2
fwuHstSERFFPGAObjects	1.3.6.1.4.1.2014.15.2.1.1.4
fwuHstSERFFPGAInfo	1.3.6.1.4.1.2014.15.2.1.1.4.1
fwuHstSERFFPGAStatus	1.3.6.1.4.1.2014.15.2.1.1.4.1.1	integer	read-only	Provides the SERF Card FPGA status. The status may be PPC can communicate with the FPGA (0) or not (1). Enumeration: 'ppcCanNotTalkToFPGA': 1, 'ppcCanTalkToFPGA': 0.
fwuHstSERFFPGATraps	1.3.6.1.4.1.2014.15.2.1.1.4.2
fwuHstMateMonObjects	1.3.6.1.4.1.2014.15.2.1.1.5
fwuHstMateMonInfo	1.3.6.1.4.1.2014.15.2.1.1.5.1
fwuHstMateMonTable	1.3.6.1.4.1.2014.15.2.1.1.5.1.1		no-access	This table maintains Information of Host Mate Monitor.
fwuHstMateMonEntry	1.3.6.1.4.1.2014.15.2.1.1.5.1.1.1		no-access	Each entry in this table refers to host Mate monitor objects.
fwuHMmonRmtID	1.3.6.1.4.1.2014.15.2.1.1.5.1.1.1.1	unitid2	read-only	ID of companion remote unit as Index of mate monitor table.
fwuHMmonRmtIPAddress	1.3.6.1.4.1.2014.15.2.1.1.5.1.1.1.2	octet string	read-only	IP addresses of remote mate. This is a link-local address.
fwuHstDARTObjects	1.3.6.1.4.1.2014.15.2.1.1.6
fwuHstDARTInfo	1.3.6.1.4.1.2014.15.2.1.1.6.1
fwuHstDARTGeneral	1.3.6.1.4.1.2014.15.2.1.1.6.1.1
fwuHstDARTGeneralTable	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1		no-access	This table maintains Information of Host DART Card.
fwuHstDARTGeneralEntry	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1		no-access	Each entry in this table refers to host DART Card objects.
fwuHstDARTNumber	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.1	integer32	read-only	A unique identifier for each DART. As there are eight DART slots, the number may be any of 1 to 8.
fwuHstDARTName	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.2	displaystring	read-only	A user defined name for each DART Card object of host. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Maximum length of the name 64 characters.
fwuHstDARTBandType	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.3	bandtype	read-only	Band type of host DART card.
fwuHstDARTPassBand	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.4	octet string	read-only	This is for configuration of Pass-band type for host DART card. Following input formats are supported for Classic and SuperDart passband configuration. 1. For Classic Darts only, User input string would be enumeration value ( i.e., 'x'), ranging from 1 to 134. See below in section 3. for valid values. 2. For SuperDarts only, a. BandType_SubBand1+SubBand2 This is applicable only for contiguous passband selection, applicable only for PCS & AWS. (e.g., 'PCS_A1+A2+A3') b. BandType_SubBand1+SubBand2:SubBand5+SubBand6 This is applicable for noncontiguous passband selection, applicable only for PCS & AWS. (e.g., 'PCS_A1+A2:C2+C1') c. BandType_StartFrequency-StartFrequency This is applicable only for contiguous passband frequency range. (e.g.,, PCS_1930-1945) d. BandType_StartFrequency1-StartFrequency1:StartFrequency2-StartFrequency2 This is applicable only for noncontiguous passband frequency ranges. (e.g., PCS_1930-1940.5:1960.7-1970.6). Where BandType is 'PCS', 'AWS', 'UMTS','EGSM900','GSM1800', 'UC700', 'LABC700'. 3. Valid enumeration value for classic dart:- undefined(-1), cellularA2A(1),cellularA(2),cellularAA1A2(3),cellularA1(4), cellularB(5),cellularB1(6),cellularBB1(7), pcsA1(8),pcsA2(9),pcsA3(10),pcsB1(11),pcsB2(12),pcsB3(13), pcsC3(14),pcsC4(15),pcsC5(16),pcsD(17),pcsE(18),pcsF(19), pcsG(20),awsH(21),pcsC2(22), pcsC1(23), pcsA1A2(24),pcsA2A3(25),pcsA3D(26),pcsDB1(27),pcsB1B2(28),pcsB2B3(29), pcsB3E(30),pcsEF(31),pcsFC3(32), pcsC3C4(33),pcsC4C5(34), pcsC5G(35),pcsGawsH(36),pcsFC2(37),pcsC1G(38),pcsA(39), pcsA2A3D(40),pcsA3DB1(41), pcsDB1B2(42),pcsB(43),pcsB2B3E(44), pcsB3EF(45),pcsEFC3(46),pcsFC3C4(47),pcsC(48), pcsC4C5G(49), pcsC5GawsH(50),pcsEFC2(51),pcsC1GawsH(52), pcsAD(53),pcsA2A3DB1(54),pcsA3DB1B2(55),pcsDB(56),pcsBE(57), pcsB2B3EF(58),pcsB3EFC3(59),pcsEFC3C4(60),pcsFC(61), pcsCG(62),pcsC4C5GawsH(63),pcsB3EFC2(64), pcsADB1(65),pcsA2A3DB1B2(66),pcsA3DB(67),pcsDBE(68), pcsBEF(69),pcsB2B3EFC3(70),pcsB3EFC3C4(71),pcsEFC(72), pcsFCG(73),pcsCGawsH(74),pcsB2B3EFC2(75), pcsADB1B2(76),pcsA2A3DB(77),pcsA3DBE(78),pcsDBEF(79), pcsBEFC3(80),pcsB2B3EFC3C4(81),pcsB3EFC(82), pcsEFCG(83),pcsFCGawsH(84),pcsADB(85), pcsA2A3DBE(86),pcsA3DBEF(87), pcsDBEFC3(88), pcsBEFC3C4(89),pcsB2B3EFC(90),pcsB3EFCG(91), pcsEFCGawsH(92),smrLow(93) , smrHigh( 94), awsA(95), awsAB(96), awsABC(97), awsABCD(98), awsABCDE(99), awsB(100), awsBC(101), awsBCD(102), awsBCDE(103), awsBCDEF(104), awsC(105), awsCD(106), awsCDE(107), awsCDEF(108), awsD(109), awsDE(110), awsDEF(111), awsE(112), awsEF(113), awsF(114), smrLowWide(115), cellularA2ABA1B1(116), GSM1800Low(117), GSM1800Middle(118), GSM1800High(119), umtsLow(120), umtsMiddle(121), umtsHigh(122), cellularAB(133), apac800iDEN(134).
fwuHstDARTOperatingMode	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.5	modetype	read-only	Operating mode of the Host DART. The DART may be operating normally (1) or on standby (2). The mode may be undefined (-1).
fwuHstDARTDiversityStatus	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.6	integer	read-only	Diversity Status of host DART. Enumeration: 'diversity': 1, 'nonDiversity': 0.
fwuHstDARTForwardGain	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.7	gaintype	read-only	Primary Gain in the forward path of Host DART. The range is 0-31dB with increments in steps of 1dB.
fwuHstDARTReverseGain	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.8	gaintype	read-only	Primary Gain in the reverse path of Host DART. The range is 0-31dB with increments in steps of 1dB.
fwuHstDARTFPGAStatus	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.9	integer	read-only	Host DART FPGA Status. It indicates whether the SeRF FPGA can talk to DART FPGA(0) or not (1). Enumeration: 'serfFpgaCanTalkToDARTFpga': 0, 'serfFpgaCannotTalkToDARTFpga': 1.
fwuHstDARTFPGAProgramVer	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.10	displaystring	read-only	FPGA Version on the Host DART card.
fwuHstDARTRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.11	displaystring	read-only	Host DART Inventory Data - TE Part Number.
fwuHstDARTRISerialNumber	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.12	displaystring	read-only	Host DART Inventory Data - Serial Number.
fwuHstDARTRIDateCode	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.13	displaystring	read-only	Host DART Inventory Data - DateCode.
fwuHstDARTRIHWVer	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.14	displaystring	read-only	Host DART Inventory Data - HW version.
fwuHstDARTRowStatus	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.15	rowstatus	read-only	The status of this conceptual row. It may be active or inactive.
fwuHstDARTPeakInputPwrLvl1	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.16	displaystring	read-only	Peak Input Power Level 1 to a Host DART.
fwuHstDARTPeakInputPwrLvl2	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.17	displaystring	read-only	Peak Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA.
fwuHstDARTPeakAvgInputPwrLvl1	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.18	displaystring	read-only	Peak Average Input Power Level1 to a Host DART.
fwuHstDARTPeakAvgInputPwrLvl2	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.19	displaystring	read-only	Peak Average Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA.
fwuHstDARTMinAvgInputPwrLvl1	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.20	displaystring	read-only	Minimum Average Input Power Level 1 to a Host DART.
fwuHstDARTMinAvgInputPwrLvl2	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.21	displaystring	read-only	Minimum Average Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA.
fwuHstDARTInputPowerMode	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.22	integer	read-write	Host DART Input Power Level Mode. The supported modes are Snapshot(0) and Max Hold(1). When setting Max Hold, ensure that the status (fwuHstDARTDiversityStatus) is not diversity. Enumeration: 'maxHold': 1, 'snapShot': 0.
fwuHstDARTPwrLevelMaxHoldReset	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.23	integer	read-write	Provision to reset the Max Hold reading. Used when the input power mode is Max hold. Reset by changing from normal (0) to reset (1). Status will revert to normal once the reset is done. In snapshot mode (see fwuHstDARTInputPowerMode) this object is not applicable (-1). Enumeration: 'reset': 1, 'notApplicable': -1, 'normal': 0.
fwuHstDARTLastMaxHoldResetTime	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.24	octet string	read-only	Date and Time of the last Max Hold reset on the host DART.
fwuHstDARTInputSrc	1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.25	integer	read-write	To identify the input source; BTS(1) or BDA(2) and change it, if required. Enumeration: 'bda': 2, 'bts': 1.
fwuHstDARTTraps	1.3.6.1.4.1.2014.15.2.1.1.6.2
fwuHstDARTDwnCon1SynLockFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.2			DART downconverter 1 synthesizer unlocked.
fwuHstDARTDwnCon2SynLockFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.3			DART downconverter 2 synthesizer unlocked.
fwuHstDARTUpConSynLockFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.4			DART upconverter synthesizer unlocked.
fwuHstDARTOverDriveFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.5			DART forward RF input too high.
fwuHstDARTUnderDriveFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.6			DART forward RF input signal below the normal operating limit.
fwuHstDARTFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.7			Summary of DART Downconverter 1 Synthesizer Unlocked, Downconverter 2 Synthesizer Unlocked, Upconverter Synthesizer Unlocked, DC Supply Fault alarms, and DART FPGA status.
fwuHstDARTDCSupplyFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.8			DART card DC supply voltages outside specification.
fwuHstDARTHardwareMismatchFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.9			Host DART does not support the selected passband. Fault occurs when a Host DART is replaced with another DART of the incorrect type.
fwuHstDARTALCLimitingFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.10			Host DART forward path Automatic Level Control is active.
fwuHstDARTLinkingConflictFault	1.3.6.1.4.1.2014.15.2.1.1.6.2.11			Host comes back up and finds that it cannot restore a link with a remote DART to which it was linked.
fwuHstSystemCardObjects	1.3.6.1.4.1.2014.15.2.1.1.7
fwuHstSystemCardInfo	1.3.6.1.4.1.2014.15.2.1.1.7.1
fwuHstSysCardRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.1.7.1.1	displaystring	read-only	Host Inventory Data - TE Part Number.
fwuHstSysCardRISerialNumber	1.3.6.1.4.1.2014.15.2.1.1.7.1.2	displaystring	read-only	Host Inventory Data - Serial Number.
fwuHstSysCardRIDateCode	1.3.6.1.4.1.2014.15.2.1.1.7.1.3	displaystring	read-only	Host Inventory Data - Date Code.
fwuHstSysCardRIHWVer	1.3.6.1.4.1.2014.15.2.1.1.7.1.4	displaystring	read-only	Host Inventory Data - Hardware version.
fwuHstSysCard10MhzRefClock	1.3.6.1.4.1.2014.15.2.1.1.7.1.5	integer	read-write	System Card Reference clock. It may be set to internal (0) or external(1). Enumeration: 'internal': 0, 'external': 1.
fwuHstSysCardCPLevel	1.3.6.1.4.1.2014.15.2.1.1.7.1.6	integer32	read-write	System Card Master Clock Priority Level prioritizes the system card clock using values 1 through 14 (Lower value is higher priority). This is primarily used in multihost systems. In such system, all hosts should have different priority levels, and the system inherently assures this. This entity allows the user to change the system set prioritization. Changeing values in a single host system has no change.
fwuHstSysCardOutputRefClock	1.3.6.1.4.1.2014.15.2.1.1.7.1.7	integer	read-write	System Card Reference clock. System Board I supports only 10 MHz and System Board II supports both 10 MHz and 30 MHz Clock output. Default value is 1 for Host and 2 for DRU. Enumeration: 'clock30mhz': 2, 'clock10mhz': 1, 'off': 0.
fwuHstSysCardRIHWGen	1.3.6.1.4.1.2014.15.2.1.1.7.1.8	integer	read-only	Host System Card Hardware Generation. Presently, there are two generations; first Generation(0), second Generation(1) Enumeration: 'secondGeneration': 1, 'firstGeneration': 0.
fwuHstSystemCardTraps	1.3.6.1.4.1.2014.15.2.1.1.7.2
fwuHstSysCardFanFault	1.3.6.1.4.1.2014.15.2.1.1.7.2.2			Fan not functioning.
fwuHstSysCardClockMismatchFault	1.3.6.1.4.1.2014.15.2.1.1.7.2.3			System Card output clock not supported.
fwuRemoteUnitObjects	1.3.6.1.4.1.2014.15.2.1.2
fwuRmtSystemLevelObjects	1.3.6.1.4.1.2014.15.2.1.2.1
fwuRmtSystemLevelInfo	1.3.6.1.4.1.2014.15.2.1.2.1.1
fwuRmtGeneral	1.3.6.1.4.1.2014.15.2.1.2.1.1.1
fwuRmtGeneralTable	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1		no-access	This table maintains Information of remote.
fwuRmtGeneralEntry	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1		no-access	Each entry in this table refers to remote objects.
fwuRmtNumber	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.1	unitid2	read-only	The Node address of connected remote.
fwuRmtCatalogState	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.2	catalogtype	read-only	Catalog state of remote. If fwuRmtCatalogState is commission(2), then start commissioning on remote, else if it in normal, do not commission the remote.
fwuRmtName	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.3	displaystring	read-only	User defined name of the remote unit. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Maximum length of the name 64 characters.
fwuRmtAlarmStatusSummary	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.4	alarmtype	read-only	Summary of alarm status of all connected remote units.
fwuRmtTempMeasurement	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.5	displaystring	read-only	Temperature of each remote unit in Celsius. This value comes from the RSI.
fwuRmtGeneralTableRowStatus	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.6	rowstatus	read-only	The status of this conceptual row. It may be active or inactive.
fwuRmtType	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.7	unittype	read-only	The type of Remote. e.g. Prism, DRU, HEU, IRU.
fwuDruIfCombinerReboot	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.8	unsigned32	read-write	Reboot an IF-combiner and all the units connected to it. Only applicable to DRU-IFs Change Value from 0 to 1 to reboot.
fwuUsrCommLinkTestIFBr	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.9	integer	read-write	Provision to perform system test on an IF branch. Change from inactive(0) to start(1) to initiate the test. For the duration of the test inprogress(2) is displayed. On completion, inactive is displayed. Enumeration: 'start': 1, 'inprogress': 2, 'inactive': 0.
fwuUsrCommLinkTestIFBrDType	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.10	bandtype	read-write	Selected Bands i.e. RF DARTs on units when performing system test.
fwuUsrCommLinkTestDartId	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.11	unsigned32	read-write	To identify the DART .
fwuDruBackPlaneRev	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.12	octet string	read-only	Provides the back plane revision of the DRU (Three pin version Number of the Chassis back plane)
fwuPrismUnitReset	1.3.6.1.4.1.2014.15.2.1.2.1.1.1.1.1.13	integer	read-write	Provides a way to reset the Remote SERF card. SET this to reset(1) to trigger a remote unit reset. Enumeration: 'reset': 1, 'normal': 0.
fwuRmtSystemLevelTraps	1.3.6.1.4.1.2014.15.2.1.2.1.2
fwuRmtAcPowerSupplyFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.2			Summary of AC Power Supply 1, AC Power Supply 2, AC Power Supply 3, and AC Power Supply 4 alarms.
fwuRmtMajorExtAlarmInputFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.3			The remote Major Ext Alarm Input Fault.
fwuRmtMinorExtAlarmInputFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.4			The remote Minor Ext Alarm Input Fault.
fwuRmtModuleMissingFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.5			A Remote (DRU/PRU/URU) pluggable module is missing (if DRU: DART or SFP. If PRU/URU: DART, SFP, LNA, LPA, or PD).
fwuRmtOverTempFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.6			Remote Temperature above operating limit.
fwuRmtUnderTempFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.7			Temperature below operating limit.
fwuRmtOpenDoorFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.8			Door open on PRU.
fwuRmtFanOverSpeedFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.9			Fans operating above expected RPM.
fwuRmtFanUnderSpeedFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.10			Fans operating below expected RPM.
fwuRmtDownLinkCalToneFailureFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.11			Forward calibration tone not at expected level.
fwuRmtUplinkFailureDetectLowFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.12			Reverse test tone not at expected level.
fwuRmtUpConvertFailureFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.13			Band specific alarm raised during Forward Link Monitoring on PRU/URU.
fwuRmtUnderPowerFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.14			Band specific alarm raised during Forward Link Monitoring on PRU/URU.
fwuRmtDownConvertFailureFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.15			Band specific alarm raised during Reverse Link Monitoring on PRU/URU.
fwuRmtUpconIndetFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.16			Band specific alarm raised during Forward Link Monitoring on PRU/URU.
fwuRmtFiberConnMismatchFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.17			Fiber optic cable connections between cascaded DRU/PRUs not following SFP connection rules.
fwuRmtExcessConnFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.18			Two or more DRU/PRU/URU connected to a single cascaded DRU/PRU/URU, or a ninth DRU/PRU/URU connected in cascade.
fwuRmtInvalidDevConnFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.19			PRU/URU connected to a DRU or vice versa.
fwuDruSysCardClockMismatchFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.20			System Card output clock not supported.
fwuDruNoCommsFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.21			DRU has lost communication with IFEU Or IFEU is disconnected from the DRU.
fwuSWVersionMismatchFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.22			Software Version Mismatch Fault. SW Versions on the Host and Remote do not match.
fwuDruSysCardFanFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.23			Fan not functioning.
fwuDruOverTempFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.24			DRU Temperature above operating limit.
fwuDruUnderTempFault	1.3.6.1.4.1.2014.15.2.1.2.1.2.25			DRU Temperature below operating limit.
fwuRmtSERFObjects	1.3.6.1.4.1.2014.15.2.1.2.2
fwuRmtSERFInfo	1.3.6.1.4.1.2014.15.2.1.2.2.1
fwuRmtSERFGeneral	1.3.6.1.4.1.2014.15.2.1.2.2.1.1
fwuRmtSERFGeneralTable	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1		no-access	This table maintains Information of remote SERF Card.
fwuRmtSERFGeneralEntry	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1		no-access	Each entry in this table refers to SERF Card objects.
fwuRmtSERFLinuxKernelVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.1	displaystring	read-only	Linux Kernel version on remote.
fwuRmtSERFLinuxBootLoaderVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.2	displaystring	read-only	Linux Boot loader version on remote.
fwuRmtSERFCompactFlashSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.3	displaystring	read-only	Compact Flash version on remote.
fwuRmtSERFFPGAVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.4	displaystring	read-only	Version of FPGA loaded on remote SeRF.
fwuRmtSERFPPCHWMonSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.5	displaystring	read-only	Hardware monitor process version on remote.
fwuRmtSERFPPCAPPMonSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.6	displaystring	read-only	Application monitor process version on remote.
fwuRmtSERFPPCMATEMonSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.9	displaystring	read-only	Mate monitor process version on remote.
fwuRmtSERFPPCENETMonSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.10	displaystring	read-only	ENET monitor process version on remote.
fwuRmtSERFPPCFPGAMonSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.11	displaystring	read-only	FPGA monitor process version on remote.
fwuRmtSERFRIDateCode	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.12	displaystring	read-only	Remote SERF Inventory - Date Code of the Remote system.
fwuRmtSERFRIHWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.13	displaystring	read-only	Remote SERF Inventory - HardWare version of the remote system.
fwuRmtSERFRISerialNumber	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.14	displaystring	read-only	Remote SERF Inventory - Serial Number.
fwuRmtSERFRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.15	displaystring	read-only	Remote SERF Inventory - TE PartNumber.
fwuRmtSERFRIHWGen	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.16	integer	read-only	Remote SERF Hardware Generation. Presently, there are two generations first generation(0), second generation(1) Enumeration: 'secondGeneration': 1, 'firstGeneration': 0.
fwuRmtpThreadSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.17	displaystring	read-only	The version number of pThread Process. If blank then pThread is not running.
fwuRmtWebServerSWVer	1.3.6.1.4.1.2014.15.2.1.2.2.1.1.1.1.18	displaystring	read-only	The version number of Web Server on remote.
fwuRmtSERFOptObjects	1.3.6.1.4.1.2014.15.2.1.2.2.1.2
fwuRmtSERFOptTable	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1		no-access	This table maintains Information of remote units SFP objects.
fwuRmtSERFOptEntry	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1		no-access	Each entry in this table refers to remote units SFP objects.
fwuRmtSERFOptSFPNumber	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.1	integer32	read-only	A unique identifier of each SFP. The identifier is the SFP slot number. There are eight slots. Therefore, the valid values are 1 to 8.
fwuRmtSERFOptSFPName	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.2	displaystring	read-write	User defined name of each Remote SFP. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Maximum length of the name 64 characters.
fwuRmtSERFOptSFPType	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.3	opticstype	read-only	SFP Type - Optical Port Type. Identifies whether the SFP is short(1)/intermediate(2)/long(3) range. It may also be unidentified (-1).
fwuRmtSERFOptSFPColor	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.4	integer32	read-only	Wavelength of light used in the SFP (in nanometers).
fwuRmtSERFOptRevLaunchPowerMeas	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.5	displaystring	read-only	Value of the optical power, in dBm received at the remote.
fwuRmtSERFOptFwdLaunchPowerMeas	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.6	displaystring	read-only	Value of the optical power, in dBm transmitted by the remote.
fwuRmtSERFOptMateName	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.7	displaystring	read-only	Name of Remote mate.
fwuRmtSERFIPEnable	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.8	integer	read-only	IP enable mode. Enumeration: 'iPDisable': 2, 'iPEnable': 1.
fwuRmtSERFOptMateId	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.9	unitid2	read-only	Identifier of (companion) mate unit.
fwuRmtSERFOptMateSfpId	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.10	integer32	read-only	Identifier of SFP to which the mate connects.
fwuRmtSERFOptMateSfpDir	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.11	integer	read-only	Indicates whether the fiber is incoming(from the direction of the host) (0) or outgoing (away from the unit)(1) on this SFP port. Enumeration: 'forwad': 1, 'reverse': 0, 'notDirection': -1.
fwuRmtSERFOptHostIP	1.3.6.1.4.1.2014.15.2.1.2.2.1.2.1.1.12	octet string	read-only	IP addresses of Host. If 'NA', then it means that no host is connected.
fwuRmtSERFTraps	1.3.6.1.4.1.2014.15.2.1.2.2.2
fwuRmtSERFHstLostFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.2			Host not communicating with DRU/PRU/URU.
fwuRmtSERFOptRxBERFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.3			High bit error rate (BER) detected by fiber optic receiver.
fwuRmtSERFOptRxNoLightFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.4			No signal detected by optical receiver.
fwuRmtSERFOptLaserFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.5			SFP optical transmitter failed.
fwuRmtSERFOptOverDriveFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.6			SFP optical receive input power above specification.
fwuRmtSERFOptUnderDriveFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.7			SFP optical receive input power below specification.
fwuRmtSERFSynthAlarmFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.8			SeRF synthesizer unlocked.
fwuRmtSERFFault	1.3.6.1.4.1.2014.15.2.1.2.2.2.9			Summary of SeRF Synthesizer Unlocked alarm and SeRF FPGA status. Possibly, the system may not be communicating with the Ethernet Switch. This is also precipitated by the I2C Bus Fault.
fwuRmtI2CBus1Fault	1.3.6.1.4.1.2014.15.2.1.2.2.2.10			Indicates an I2C communication problem.
fwuRmtI2CBus2Fault	1.3.6.1.4.1.2014.15.2.1.2.2.2.11			Indicates an I2C communication problem.
fwuRmtSERFEthPortObjects	1.3.6.1.4.1.2014.15.2.1.2.3
fwuRmtSERFEthPortInfo	1.3.6.1.4.1.2014.15.2.1.2.3.1
fwuRmtSERFEthPortTable	1.3.6.1.4.1.2014.15.2.1.2.3.1.1		no-access	This table maintains information of Host Ethernet Ports.
fwuRmtSERFEthPortEntry	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1		no-access	Each entry in this table refers to Host SERF Ethernet port objects.
fwuRmtSERFEthPortNumber	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.1	unsigned32	read-only	A unique identifier for each Ethernet port. There are twelve ports.
fwuRmtSERFEthPortType	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.2	enettype	read-only	An identifier for the type of Ethernet port. The port types are network(1), craft(2) , management(3) , switch(4) , SFP(5). It may be unknown (-1).
fwuRmtSERFEthPortRxBytes	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.3	counter64	read-only	The number of bytes recieved at this ethernet port.
fwuRmtSERFEthPortRxPkts	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.4	counter64	read-only	The number of packets recieved at this ethernet port.
fwuRmtSERFEthPortRxFcsErrors	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.5	counter64	read-only	The number of FCS errors recieved at this ethernet port.
fwuRmtSERFEthPortRxBroadcastPkts	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.6	counter64	read-only	The number of broadcast packets recieved at this ethernet port.
fwuRmtSERFEthPortRxMulticastPkts	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.7	counter64	read-only	The number of multicast packets recieved at this ethernet port.
fwuRmtSERFEthPortRxFragmtdFrames	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.8	counter64	read-only	The number of fragmented frames received at this ethernet port.
fwuRmtSERFEthPortRxJabbersFrames	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.9	counter64	read-only	The number of jabber frames received at this ethernet port.
fwuRmtSERFEthPortTxByteCounter	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.10	counter64	read-only	The number of bytes transmitted from this ethernet port.
fwuRmtSERFEthPortTxPkts	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.11	counter64	read-only	The number of packets transmitted from this ethernet port.
fwuRmtSERFEthPortTxBroadcastPkts	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.12	counter64	read-only	The number of broadcast packets transmitted from this ethernet port.
fwuRmtSERFEthPortTxMulticastPkts	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.13	counter64	read-only	The number of multicast packets transmitted from this ethernet port.
fwuRmtSERFEthPortSFPId	1.3.6.1.4.1.2014.15.2.1.2.3.1.1.1.14	integer32	read-only	Identifier of SFP to which this ethernet port connects to.
fwuRmtSERFEthPortTraps	1.3.6.1.4.1.2014.15.2.1.2.3.2
fwuRmtSERFFPGAObjects	1.3.6.1.4.1.2014.15.2.1.2.4
fwuRmtSERFFPGAInfo	1.3.6.1.4.1.2014.15.2.1.2.4.1
fwuRmtSERFFPGAInfoTable	1.3.6.1.4.1.2014.15.2.1.2.4.1.1		no-access	This table maintains Information of remote SERF FPGA objects.
fwuRmtSERFFPGAInfoEntry	1.3.6.1.4.1.2014.15.2.1.2.4.1.1.1		no-access	Each entry in this table refers to SERF FPGA information.
fwuRmtSERFFPGAStatus	1.3.6.1.4.1.2014.15.2.1.2.4.1.1.1.1	integer	read-only	Remote SERF Card FPGA status. Either the ppc can talk to FPGA(0) or not(1) Enumeration: 'ppcCannotTalkToFPGA': 1, 'ppcCanTalkToFPGA': 0.
fwuRmtSERFFPGATraps	1.3.6.1.4.1.2014.15.2.1.2.4.2
fwuRmtDARTObjects	1.3.6.1.4.1.2014.15.2.1.2.6
fwuRmtDARTInfo	1.3.6.1.4.1.2014.15.2.1.2.6.1
fwuRmtDARTGeneral	1.3.6.1.4.1.2014.15.2.1.2.6.1.1
fwuRmtDARTGeneralTable	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1		no-access	This table maintains Information of Remote DART Card.
fwuRmtDARTGeneralEntry	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1		no-access	Each entry in this table refers to remote DART Card objects.
fwuRmtDARTNumber	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.1	integer32	read-only	A unique identifier for each DART Card Object of remote. Since there are eight DART slots the valid values are 1 to 8.
fwuRmtDARTName	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.2	displaystring	read-only	A user defined name for each DART Card object of remote. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 1 character. Maximum length of the name 64 characters.
fwuRmtDARTBandType	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.3	bandtype	read-only	Band type of remote DART card.
fwuRmtDARTPassBand	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.4	octet string	read-only	This is for configuration of Pass-band type for Remote DART card. Following input formats are supported for Classic and SuperDart passband configuration. 1. For Classic Darts only, User input string would be enumeration value ( i.e., 'x'), ranging from 1 to 134. See below in section 3. for valid values. 2. For SuperDarts only, a. BandType_SubBand1+SubBand2 This is applicable only for contiguous passband selection, applicable only for PCS & AWS. (e.g., 'PCS_A1+A2+A3') b. BandType_SubBand1+SubBand2:SubBand5+SubBand6 This is applicable for noncontiguous passband selection, applicable only for PCS & AWS. (e.g., 'PCS_A1+A2:C2+C1') c. BandType_StartFrequency-StartFrequency This is applicable only for contiguous passband frequency range. (e.g.,, PCS_1930-1945) d. BandType_StartFrequency1-StartFrequency1:StartFrequency2-StartFrequency2 This is applicable only for noncontiguous passband frequency ranges. (e.g., PCS_1930-1940.5:1960.7-1970.6). Where BandType is 'PCS', 'AWS', 'UMTS','EGSM900','GSM1800', 'UC700'. 3. Valid enumeration value for classic dart:- undefined ( -1 ), cellularA2A(1),cellularA(2),cellularAA1A2(3),cellularA1(4), cellularB(5),cellularB1(6),cellularBB1(7), pcsA1(8),pcsA2(9),pcsA3(10),pcsB1(11),pcsB2(12),pcsB3(13), pcsC3(14),pcsC4(15),pcsC5(16),pcsD(17),pcsE(18),pcsF(19), pcsA1A2(24),pcsA2A3(25),pcsA3D(26),pcsDB1(27),pcsB1B2(28),pcsB2B3(29), pcsB3E(30),pcsEF(31),pcsFC3(32),pcsC3C4(33),pcsC4C5(34), pcsC5G(35),pcsGawsH(36),pcsFC2(37),pcsC1G(38),pcsA(39), pcsA2A3D(40),pcsA3DB1(41),pcsDB1B2(42),pcsB(43),pcsB2B3E(44), pcsB3EF(45),pcsEFC3(46),pcsFC3C4(47),pcsC(48), pcsC4C5G(49), pcsC5GawsH(50),pcsEFC2(51),pcsC1GawsH(52), pcsAD(53),pcsA2A3DB1(54),pcsA3DB1B2(55),pcsDB(56),pcsBE(57), pcsB2B3EF(58),pcsB3EFC3(59),pcsEFC3C4(60),pcsFC(61), pcsCG(62),pcsC4C5GawsH(63),pcsB3EFC2(64), pcsADB1(65),pcsA2A3DB1B2(66),pcsA3DB(67),pcsDBE(68), pcsBEF(69),pcsB2B3EFC3(70),pcsB3EFC3C4(71),pcsEFC(72), pcsFCG(73),pcsCGawsH(74),pcsB2B3EFC2(75), pcsADB1B2(76),pcsA2A3DB(77),pcsA3DBE(78),pcsDBEF(79), pcsBEFC3(80),pcsB2B3EFC3C4(81),pcsB3EFC(82), pcsEFCG(83),pcsFCGawsH(84),pcsADB(85), pcsA2A3DBE(86),pcsA3DBEF(87),pcsDBEFC3(88), pcsBEFC3C4(89),pcsB2B3EFC(90),pcsB3EFCG(91), pcsEFCGawsH(92),smrLow(93) , smrHigh( 94), awsA(95), awsAB(96), awsABC(97), awsABCD(98), awsABCDE(99), awsB(100), awsBC(101), awsBCD(102), awsBCDE(103), awsBCDEF(104), awsC(105), awsCD(106), awsCDE(107), awsCDEF(108), awsD(109), awsDE(110), awsDEF(111), awsE(112), awsEF(113), awsF(114), smrLowWide(115), cellularA2ABA1B1(116), GSM1800Low(117), GSM1800Middle(118), GSM1800High(119), umtsLow(120), umtsMiddle(121), umtsHigh(122), cellularAB(133), apac800iDEN(134)
fwuRmtDARTOperatingMode	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.5	modetype	read-only	Operating mode of remote DART card. The DART may be operating normally (1) or on standby (2). The mode may be undefined (-1).
fwuRmtDARTDiversityStatus	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.6	integer	read-only	Diversity Status of remote DART card. Enumeration: 'diversity': 1, 'nonDiversity': 0.
fwuRmtDARTForwardGain	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.7	gaintype	read-only	Primary Gain in forward path of remote DART card. The range is 0-31dB with increments in steps of 1dB.
fwuRmtDARTReverseGain	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.8	gaintype	read-only	Primary Gain in reverse path of remote DART card.
fwuRmtDARTForwardDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.9	delaytype	read-only	Forward delay in micro seconds on the remote DART. If the delay setting is outside the valid range of delay values then ranging fault will be raised if the Remote Dart is Linked.
fwuRmtDARTReverseDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.10	delaytype	read-only	Reverse delay in micro seconds on the remote DART. If the delay setting is outside the valid range of delay values then ranging fault will be raised if the Remote Dart is Linked.
fwuRmtDARTTempMeas	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.11	displaystring	read-only	Temperature of Remote DART in degree Celsius.
fwuRmtDARTFPGAStatus	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.12	integer	read-only	Remote DART FPGA Status. It indicates if the SERF FPGA can talk(0) or not talk(1)to DART FPGA . Enumeration: 'serfFpgaCanTalkToDARTFpga': 0, 'serfFpgaCannotTalkToDARTFpga': 1.
fwuRmtDARTFPGAProgramVer	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.13	displaystring	read-only	FPGA version on the remote DART.
fwuRmtDARTRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.14	displaystring	read-only	Remote DART Inventory Data - TE Part Number.
fwuRmtDARTRISerialNumber	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.15	displaystring	read-only	Remote DART Inventory Data - Serial Number.
fwuRmtDARTRIDateCode	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.16	displaystring	read-only	Remote DART Inventory Data - DateCode.
fwuRmtDARTRIHWVer	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.17	displaystring	read-only	Remote DART Inventory Data - HW version.
fwuRmtDARTGeneralTableRowStatus	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.18	rowstatus	read-only	The status of this conceptual row.
fwuRmtDARTActualForwardDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.19	integer32	read-only	This is the forward delay on Remote DART.
fwuRmtDARTForwardLowerboundDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.20	integer32	read-only	This is the lower bound of the Forward Delay values.
fwuRmtDARTForwardUpperboundDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.21	integer32	read-only	This is the upper bound of the Forward Delay values.
fwuRmtDARTActualReverseDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.22	integer32	read-only	This is the Reverse delay on Remote DART.
fwuRmtDARTReverseLowerboundDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.23	integer32	read-only	This is the lower bound of the Reverse delay values.
fwuRmtDARTReverseUpperboundDelay	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.24	integer32	read-only	This is the upper bound of the Reverse delay values.
fwuRmtDARTPeakInputPwrLvl1	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.25	displaystring	read-only	Peak Input Power Level 1 to a Remote DART.
fwuRmtDARTPeakInputPwrLvl2	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.26	displaystring	read-only	Peak Input Power Level 2 to the Remote DART.
fwuRmtDARTPeakAvgInputPwrLvl1	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.27	displaystring	read-only	Peak Average Input Power Level 1 to the Remote DART.
fwuRmtDARTPeakAvgInputPwrLvl2	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.28	displaystring	read-only	Peak Average Input Power Level 2 to the Remote DART.
fwuRmtDARTMinAvgInputPwrLvl1	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.29	displaystring	read-only	Minimum Average Input Power Level 1 to the Remote DART.
fwuRmtDARTMinAvgInputPwrLvl2	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.30	displaystring	read-only	Minimum Average Input Power Level 2 to the Remote DART.
fwuRmtDARTInputPowerMode	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.31	integer	read-write	Remote DART Input Power Level Mode. Two modes are supported Snapshot(0) and Max Hold(1). Enumeration: 'maxHold': 1, 'snapShot': 0.
fwuRmtDARTPwrLevelMaxHoldReset	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32	integer	read-write	Provision to reset the Max Hold reading. Used when the input power mode is Max hold. Reset by changing from normal (0) to reset (1). Status will revert to normal once the reset is done. In snapshot mode (see fwuRmtDARTInputPowerMode) this object is not applicable (-1). Enumeration: 'reset': 1, 'notApplicable': -1, 'normal': 0.
fwuRmtDARTLastMaxHoldResetTime	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.33	octet string	read-only	Date and Time of the last maxHold reset on the remote DART.
fwuRmtDARTReverseGainMode	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.34	integer	read-write	The gain modes on the Reverse Path. Two modes are supported, Normal(0) and High(1). It is applicable to all RF modules but not to IF DARTs. Enumeration: 'high': 1, 'normal': 0.
fwuRmtDARTTxRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.35	displaystring	read-only	Remote Inventory Data - TE Part Number [Tx Board]. Field will have value only if Tx Board is present.
fwuRmtDARTTxRISerialNumber	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.36	displaystring	read-only	Remote Inventory Data - Serial Number [Tx Board]. Field will have value only if Tx Board is present.
fwuRmtDARTTxRIDateCode	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.37	displaystring	read-only	Remote Inventory Data - DateCode [Tx Board]. Field will have value only if Tx Board is present.
fwuRmtDARTTxRIHWVer	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.38	displaystring	read-only	Remote Inventory Data - HW version [Tx Board]. Field will have value only if Tx Board is present.
fwuRmtDARTLinkedStatus	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.39	integer	read-only	Indicates if the DART is linked (1) or not (0). Enumeration: 'notLinked': 0, 'linked': 1.
fwuRmtDARTAvailable	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.40	integer	read-only	Indicates if the DART is available for use (1) or not (0). Enumeration: 'notAvailable': 0, 'available': 1.
fwuRmtDARTUsedSFP	1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.41	integer	read-only	Indicates the SFP (number) used by a DART to link. There are eight possible SFP numbers. Therefore, the valid values are 1 to 8.
fwuRmtDARTTraps	1.3.6.1.4.1.2014.15.2.1.2.6.2
fwuRmtDARTDwnCon1SynLockFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.2			Lock state of the first down converter synthesizer.
fwuRmtDARTDwnCon2SynLockFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.3			DART downconverter 2 synthesizer unlocked.
fwuRmtDARTUpConSynLockFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.4			DART downconverter 2 synthesizer unlocked.
fwuRmtDARTDCSupplyFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.5			DART card DC supply voltages outside specification.
fwuRmtDARTFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.6			Summary of DART Downconverter 1 Synthesizer Unlocked, Downconverter 2 Synthesizer Unlocked, Upconverter Synthesizer Unlocked, DC Supply Fault alarms, and DART FPGA status.
fwuRmtDARTHardwareMismatchFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.7			Remote DART does not support the selected passband. Fault occurs when a Remote DART is replaced with another DART of the incorrect type.
fwuRmtRangingFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.8			DRU/PRU/URU delay settings outside the valid range.
fwuRmtDARTOverTempFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.9			Remote DART temperature above operating limit.
fwuRmtDARTLowTempFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.10			Remote DART temperature below operating limit.
fwuRmtDARTUplinkInactivityFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.11			No uplink activity is detected for one hour.
fwuRmtDARTCommsFault	1.3.6.1.4.1.2014.15.2.1.2.6.2.12			The Remote DART communication path is missing or incorrect.
fwuRmtLPAObjects	1.3.6.1.4.1.2014.15.2.1.2.8
fwuRmtLPAInfo	1.3.6.1.4.1.2014.15.2.1.2.8.1
fwuRmtLPAInfoTable	1.3.6.1.4.1.2014.15.2.1.2.8.1.1		no-access	This table maintains Information of remote LPA objects.
fwuRmtLPAInfoEntry	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1		no-access	Each entry in this table refers to LPA objects.
fwuRmtLPANumber	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.1	integer32	read-only	A unique identifier for an LPA.
fwuRmtLPAReset	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.2	integer	read-write	Provision to reset the LPA. Change from normal(0) to reset(1) to perform a reset of the LPA. Resetting the LPA when it is offline will place in an operating state. Enumeration: 'reset': 1, 'normal': 0.
fwuRmtLPAOpState	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.3	integer	read-only	Identifies the LPA Operating mode. The modes are operating (0) and offline (1). The operating state is controlled by fwuRmtLPAControl. Also, see fwuRmtLPAReset. Enumeration: 'offline': 1, 'operating': 0.
fwuRmtLPAPartNum	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.4	displaystring	read-only	Remote LPA Part Number.
fwuRmtLPASerialNum	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.5	displaystring	read-only	Remote LPA Serial Number.
fwuRmtLPAHWVer	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.6	displaystring	read-only	Remote LPA Hardware version.
fwuRmtLPASWVer	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.7	displaystring	read-only	Remote LPA Software version.
fwuRmtLPADescr	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.8	displaystring	read-only	Remote LPA Description.
fwuRmtLPAControl	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.9	integer	read-write	Provision to control the operating mode of remote LPA. When the control is set to normal (0), the operating mode is operating. When the control is set to offline (1), the operating mode is standby. fwuRmtLPAOpState will reflect the change in state/mode when the values are changed for this entity. Enumeration: 'standby': 1, 'normal': 0.
fwuRmtLPAMaxOpPwr	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.10	displaystring	read-only	Maximum Output power for the LPA. This object is applicable for HDMs also.
fwuRmtLPABandType	1.3.6.1.4.1.2014.15.2.1.2.8.1.1.1.11	duplexertype	read-only	LPA hardware type. Valid LPA Types are cellularA(1), cellularB(2), smrLow(3), smrHigh(4), pcs(5), aws(6), smrLowWide(7), fullCellular(8), gsm1800(9), umts(10), egsm900(11), lowerABC(12), upperC700(13), apac800iDEN(14), prismSmr800and900(15), prismSmr900and800(16), prismSmr800(17), cellularApac(18), apacEgsm900(19), pGsmEgsm900(20)
fwuRmtLPATraps	1.3.6.1.4.1.2014.15.2.1.2.8.2
fwuRmtLPADisableFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.2			PRU/URU Linear Power Amplifier (LPA) disabled due to an internally detected problem. (VSWR, DC, Loop Fault, Low Power, or Temperature High alarm).
fwuRmtLPAOverPowerFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.3			PRU/URU Linear Power Amplifier (LPA) output power level above operating limit.
fwuRmtLPAHighTempFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.4			LPA High Temperature Fault.
fwuRmtLPAVswrFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.5			PRU/URU Linear Power Amplifier (LPA) VSWR fault.
fwuRmtLPADcFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.6			PRU/URU Linear Power Amplifier (LPA) DC fault.
fwuRmtLPALoopFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.7			PRU/URU Linear Power Amplifier (LPA) Loop fault.
fwuRmtLPALowPowerFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.8			Internal low power fault state of linear power amplifier (the gain of one or more internal amplifiers does not meet specification).
fwuRmtLPADetectFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.9			Linear Power Amplifier (LPA) detection fault. LPA missing from remote.
fwuRmtPaOverCurrentFault	1.3.6.1.4.1.2014.15.2.1.2.8.2.10			PA reported fault.
fwuRmtPwrDetectorBoardObjects	1.3.6.1.4.1.2014.15.2.1.2.9
fwuRmtPwrDetectorBoardInfo	1.3.6.1.4.1.2014.15.2.1.2.9.1
fwuRmtPwrDetectorBoardInfoTable	1.3.6.1.4.1.2014.15.2.1.2.9.1.1		no-access	This table maintains Information of remote power detector board objects.
fwuRmtPwrDetectorBoardInfoEntry	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1		no-access	Each entry in this table refers to power detector board objects.
fwuRmtPowerDetectorNumber	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.1	integer32	read-only	A unique identifier for each power detector.
fwuRmtSystemVswrMeas	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.2	displaystring	read-only	VSWR (Voltage Standing Wave Ratio) measured in the system.
fwuRmtRFPowerOutputMeas	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.3	displaystring	read-only	The value of Remote RF Power Output, in dBm.
fwuRmtPwrDetectorBoardRIADCPartNum	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.4	displaystring	read-only	Power Detector Inventory - TE Part Number.
fwuRmtPwrDetectorBoardRISerialNum	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.5	displaystring	read-only	Power Detector Inventory - Serial Number.
fwuRmtPwrDetectorBoardRIDateCode	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.6	displaystring	read-only	Power Detector Inventory - Date Code.
fwuRmtPwrDetectorBoardRIHWVer	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.7	displaystring	read-only	Power Detector Inventory - HW version.
fwuRmtPwrDetectorNoRfPowerThershold	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.8	displaystring	read-write	Threshold value for RF No Power. The minimum threshold value is 0dBm and maximum threshold value is 100dBm.
fwuRmtSystemVSWRThreshold	1.3.6.1.4.1.2014.15.2.1.2.9.1.1.1.9	displaystring	read-write	User set VSWR threshold value. User is to provide the VSWR value in the form x.y:1. If the value is provided as x:1 then it will be represented as x.0:1. The minimum threshold value is 2.0 and maximum threshold value is 9.0.
fwuRmtPwrDetectorBoardTraps	1.3.6.1.4.1.2014.15.2.1.2.9.2
fwuRmtSystemVswrFault	1.3.6.1.4.1.2014.15.2.1.2.9.2.2			PRU/URU VSWR measurement above specification.
fwuRmtRFPowerFault	1.3.6.1.4.1.2014.15.2.1.2.9.2.3			PRU/URU RF Output Power below minimum threshold.
fwuRmtLNAObjects	1.3.6.1.4.1.2014.15.2.1.2.10
fwuRmtLNAInfo	1.3.6.1.4.1.2014.15.2.1.2.10.1
fwuRmtLNAInfoTable	1.3.6.1.4.1.2014.15.2.1.2.10.1.1		no-access	This table maintains Information of remote LNA objects.
fwuRmtLNAInfoEntry	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1		no-access	Each entry in this table refers to LNA information.
fwuRmtLNANumber	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.1	integer32	read-only	A unique identifier for LNA Objects.
fwuRmtLNAType	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.2	lnatype	read-only	Remote LNA card type. Valid LNA types are Cellular A(1), Cellular B(2), SMR Low(3), SMR High(4), PCS(5), AWS(6), SMR Low Wide(7), Full Cellular(8), GSM1800(9), UMTS(10), EGSM900(11), Lower ABC 700(12), Upper C 700(13), APAC 800 iDEN(14), Prism SMR 800 and 900(15), Prism SMR 900 and 800(16), Prism SMR 800(17).
fwuRmtLNARIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.3	displaystring	read-only	LNA Inventory Data - TE Part Number.
fwuRmtLNARISerialNumber	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.4	displaystring	read-only	LNA Inventory Data - Serial Number.
fwuRmtLNARIDateCode	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.5	displaystring	read-only	LNA Inventory Data - Date Code.
fwuRmtLNARIHWVer	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.6	displaystring	read-only	LNA Inventory Data - HW version.
fwuRmtDuplexerType	1.3.6.1.4.1.2014.15.2.1.2.10.1.1.1.7	duplexertype	read-only	Duplexer hardware type. Valid Duplexer Types are cellularA(1), cellularB(2), smrLow(3), smrHigh(4), pcs(5), aws(6), smrLowWide(7), fullCellular(8), gsm1800(9), umts(10), egsm900(11), lowerABC(12), upperC700(13), apac800iDEN(14), prismSmr800and900(15), prismSmr900and800(16), prismSmr800(17), cellularApac(18), apacEgsm900(19), pGsmEgsm900(20)
fwuRmtLNATraps	1.3.6.1.4.1.2014.15.2.1.2.10.2
fwuRmtLNAPowerFault	1.3.6.1.4.1.2014.15.2.1.2.10.2.2			PRU/URU Low Noise Amplifier (LNA) Power fault.
fwuRmtDuplexerFreqMismatchFault	1.3.6.1.4.1.2014.15.2.1.2.10.2.3			Configured frequency range not supported by Duplexer.
fwuRmtRDIObjects	1.3.6.1.4.1.2014.15.2.1.2.11
fwuRmtRDIInfo	1.3.6.1.4.1.2014.15.2.1.2.11.1
fwuRmtRDIInfoTable	1.3.6.1.4.1.2014.15.2.1.2.11.1.1		no-access	This table maintains Information of remote RDI objects.
fwuRmtRDIInfoEntry	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1		no-access	Each entry in this table refers to RDI information.
fwuRmtRDINumber	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.1	integer32	read-only	A unique identifier for each RDI.
fwuRmtRDIRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.2	displaystring	read-only	RDI Inventory Data - TE Part Number.
fwuRmtRDIRISerialNumber	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.3	displaystring	read-only	RDI Inventory Data - Serial Number.
fwuRmtRDIRIDateCode	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.4	displaystring	read-only	RDI Inventory Data - Date Code.
fwuRmtRDIRIHWVer	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.5	displaystring	read-only	RDI Inventory Data - HW version.
fwuRmtRDIRIHWType	1.3.6.1.4.1.2014.15.2.1.2.11.1.1.1.6	integer	read-only	Identifies if RDI(1) or ALPACA(2) board. It may be unknown(0). Enumeration: 'unknown': 0, 'rdi': 1, 'alpaca': 2.
fwuRmtRDITraps	1.3.6.1.4.1.2014.15.2.1.2.11.2
fwuRmtACPowerSupplyMon1Fault	1.3.6.1.4.1.2014.15.2.1.2.11.2.1			AC Power monitor 1 Fault.
fwuRmtACPowerSupplyMon2Fault	1.3.6.1.4.1.2014.15.2.1.2.11.2.2			AC Power monitor 2 Fault.
fwuRmtACPowerSupplyMon3Fault	1.3.6.1.4.1.2014.15.2.1.2.11.2.3			AC Power monitor 3 Fault.
fwuRmtRSIObjects	1.3.6.1.4.1.2014.15.2.1.2.12
fwuRmtRSIInfo	1.3.6.1.4.1.2014.15.2.1.2.12.1
fwuRmtRSIInfoTable	1.3.6.1.4.1.2014.15.2.1.2.12.1.1		no-access	This table maintains Information of Remote RSI objects.
fwuRmtRSIInfoEntry	1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1		no-access	Each entry in this table refers to RSI information.
fwuRmtRSIRIADCPartNumber	1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.1	displaystring	read-only	Remote Inventory Data - TE Part Number.
fwuRmtRSIRISerialNumber	1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.2	displaystring	read-only	Remote Inventory Data - Serial Number.
fwuRmtRSIRIDateCode	1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.3	displaystring	read-only	Remote Inventory Data - Date Code.
fwuRmtRSIRIHWVer	1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.4	displaystring	read-only	Remote Inventory Data - Hardware version.
fwuRmtCapacity	1.3.6.1.4.1.2014.15.2.1.2.12.1.1.1.5	unsigned32	read-only	The number of RF modules that can be installed in the remote.
fwuRmtRSITraps	1.3.6.1.4.1.2014.15.2.1.2.12.2
fwuRmtACPowerSupplyMon4Fault	1.3.6.1.4.1.2014.15.2.1.2.12.2.1			AC Power monitor 4 Fault.
fwuGeneralObjects	1.3.6.1.4.1.2014.15.2.1.3
fwuNotifObjects	1.3.6.1.4.1.2014.15.2.1.3.1
fwuTrapSequenceNumber	1.3.6.1.4.1.2014.15.2.1.3.1.1	counter32	no-access	Count of the total number of traps (including this trap), raised by the agent.
fwuTrapTimeStamp	1.3.6.1.4.1.2014.15.2.1.3.1.2	dateandtime	no-access	The trap time stamp.
fwuNotificationStatus	1.3.6.1.4.1.2014.15.2.1.3.1.3	alarmtype	no-access	The severity of the fault.
fwuModuleType	1.3.6.1.4.1.2014.15.2.1.3.1.4	moduletype	no-access	The module type reporting alarm.
fwuModuleNumber	1.3.6.1.4.1.2014.15.2.1.3.1.5	integer32	no-access	The numerical Id of module, for the above module type, reporting the alarm.
fwuTrapCode	1.3.6.1.4.1.2014.15.2.1.3.1.6	integer	no-access	The unique ID of the trap.
fwuTrapNodeAddress	1.3.6.1.4.1.2014.15.2.1.3.1.7	integer32	no-access	Unit from which the trap originated.
fwuAlarmedModuleName	1.3.6.1.4.1.2014.15.2.1.3.1.8	displaystring	no-access	Name of the hardware module where the trap originated.
fwuDARTMappingObjects	1.3.6.1.4.1.2014.15.2.1.3.2
fwuDARTMappingInfo	1.3.6.1.4.1.2014.15.2.1.3.2.1
fwuDARTMappingTable	1.3.6.1.4.1.2014.15.2.1.3.2.1.1		no-access	This table maintains Information of DART Mapping Objects.
fwuDARTMappingEntry	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1		no-access	Each entry in this table refers to DART Mapping Objects.
fwuDARTMappingIndex	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.1	unsigned32	read-only	DART Mapping Table Index.
fwuUnitID	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.2	unitid2	read-only	Identifier for the unit.
fwuUnitDARTID	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.3	integer32	read-only	Identifier of DART on the unit. Since there is a maximum of 8 DARTs, the valid values are one to eight.
fwuUnitSFPID	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.4	integer32	read-only	Identifier of unit SFP connected to the mate DART (outgoing; away from the Host). Since there is a maximum of 8 SFPs, the valid values are one to eight.
fwuUnitDartPassBand	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.5	octet string	read-only	Band-Passband information of the linked DART on the host side.
fwuMateID	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.6	unitid2	read-only	Identifier of (companion) mate unit.
fwuMateDARTID	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.7	integer32	read-only	Identifies the (companion) DART on mate unit. Since there is a maximum of 8 DARTs, the valid values are one to eight.
fwuMateSFPID	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.8	integer32	read-only	Identifies the remote SFP connected to the unit DART(incoming from direction of the Host).
fwuMateDartPassband	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.9	octet string	read-only	Band-Passband information of the linked DART on the Mate side.
fwuSFPStartTimeSlot	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.10	integer32	read-only	Value of the first time slot used on the fiber carrying RF from unit DART to mate DART. Though this is a read-write object, the end user can only read the value. This and the next object are pair of values for a fiber. Depending on the DART type there may be a maximum of six or twelve time slots.
fwuSFPEndTimeSlot	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.11	integer32	read-only	Value of the last time slot used on the fiber carrying RF from unit DART to mate DART. Though this is a read-write object, the end user can only read the value. This and the previous object are pair of values for a fiber.
fwuMappingStatus	1.3.6.1.4.1.2014.15.2.1.3.2.1.1.1.12	rowstatus	read-only	The status of the conceptual row. The status may be active or inactive.
fwuSystemAlarmManagement	1.3.6.1.4.1.2014.15.2.1.3.3
fwuSystemAlarmManagementTable	1.3.6.1.4.1.2014.15.2.1.3.3.1		no-access	This table maintains alarm managing property and threshold information of all alarms.
fwuSystemAlarmManagementEntry	1.3.6.1.4.1.2014.15.2.1.3.3.1.1		no-access	Each entry in this table refers to Alarm management table Objects.
fwuSystemAlarmcode	1.3.6.1.4.1.2014.15.2.1.3.3.1.1.1	unsigned32	read-only	The alarm code.It is used as Table Index.
fwuSystemAlarmManageable	1.3.6.1.4.1.2014.15.2.1.3.3.1.1.2	alarmmanage	read-only	Indicates if the alarm is manageble(0) or not (1). If manageable, use fwuSystemAlarmEnabled, see below, to enable or disable the alarm.
fwuSystemAlarmThreshold	1.3.6.1.4.1.2014.15.2.1.3.3.1.1.3	displaystring	read-only	Alarm Threshold value.
fwuSystemAlarmModType	1.3.6.1.4.1.2014.15.2.1.3.3.1.1.4	integer32	read-only	Identifies the module type which raised the alarm.
fwuSystemModuleAlarmEnableTable	1.3.6.1.4.1.2014.15.2.1.3.3.2		no-access	This table will allow the user to enable or disable an alarm. Use the fwuSystemAlarmManagementTable to check if the alarm is manageable or not.
fwuSystemModuleAlarmEnableEntry	1.3.6.1.4.1.2014.15.2.1.3.3.2.1		no-access	Each entry in this table refers to Module alarm enable table Objects.
fwuSystemTrapNodeAddress	1.3.6.1.4.1.2014.15.2.1.3.3.2.1.1	unsigned32	read-write	The unit which raised the alarm.
fwuSystemAlarmModuleNo	1.3.6.1.4.1.2014.15.2.1.3.3.2.1.2	unsigned32	read-write	The module which raised the alarm.
fwuSystemModuleAlarmcode	1.3.6.1.4.1.2014.15.2.1.3.3.2.1.3	unsigned32	read-write	The alarm code.
fwuSystemAlarmEnabled	1.3.6.1.4.1.2014.15.2.1.3.3.2.1.4	alarmenable	read-write	This is used to enable or disable the alarm. Alarms is enabled by default, except the Uplink inactivity fault.
fwuGeoObjects	1.3.6.1.4.1.2014.15.2.1.3.4
fwuGeoTable	1.3.6.1.4.1.2014.15.2.1.3.4.2		no-access	This table maintains Information of Geo Objects.
fwuGeoEntry	1.3.6.1.4.1.2014.15.2.1.3.4.2.1		no-access	Each entry in this table refers to Geo Objects.
fwuGeoIndex	1.3.6.1.4.1.2014.15.2.1.3.4.2.1.1	unsigned32	read-write	Geo objects Table Index.
fwuGeoLatitude	1.3.6.1.4.1.2014.15.2.1.3.4.2.1.2	displaystring	read-write	Identifies the Latitude of remote unit.
fwuGeoLongitude	1.3.6.1.4.1.2014.15.2.1.3.4.2.1.3	displaystring	read-write	Identifies the Longitude of remote unit.
fwuGeoRmtName	1.3.6.1.4.1.2014.15.2.1.3.4.2.1.4	displaystring	read-only	The Remote name.
fwuGeoStatus	1.3.6.1.4.1.2014.15.2.1.3.4.2.1.5	integer	read-only	Standard SNMP row status for this table. Enumeration: 'active': 1, 'notPresent': 0, 'inActive': 2.
fwuSnmpSettings	1.3.6.1.4.1.2014.15.2.1.3.5
fwuV1TrapAgentAddrOverrideMode	1.3.6.1.4.1.2014.15.2.1.3.5.1	integer	read-write	Provision to overide the default (1) or use default (0) agent address in v1 trap PDU. Use fwuV1TrapAgentAddrOverrideIPAddr to set the overriding agent address. Enumeration: 'enable': 1, 'disable': 0.
fwuV1TrapAgentAddrOverrideIPAddr	1.3.6.1.4.1.2014.15.2.1.3.5.2	octet string	read-write	The overriding agent IP address in v1 trap PDU. Use Internet standard dot-decimal notation. Enable its use by setting fwuV1TrapAgentAddrOverrideMode.
fwuSnmpTrapResendInterval	1.3.6.1.4.1.2014.15.2.1.3.5.3	integer32	read-write	Time, in seconds, to resend unacknowledged traps. The trap will not be resent if this is set to zero(0). Acknowledgement is not needed if resend is not required, therefore, no trap entry will be entered into fwuSystemActiveAlarmTable.
fwuSnmpTrapResendMaximum	1.3.6.1.4.1.2014.15.2.1.3.5.4	integer32	read-write	Maximum number of times traps will be resent before removal if not acknowledged. If set to zero, it will not be resent.
fwuSnmpTrapMgrConfigTable	1.3.6.1.4.1.2014.15.2.1.3.5.7		no-access	Table containing information about the trap destinations. For changes to take effect, a (Host) reboot is required.
fwuSnmpTrapMgrConfigEntry	1.3.6.1.4.1.2014.15.2.1.3.5.7.1		no-access	An entry in the fwuSnmpTrapMgrConfigTable.
fwuTrapMgrRowId	1.3.6.1.4.1.2014.15.2.1.3.5.7.1.1	integer	no-access	The unique index of this trap destination.
fwuTrapMgrIpAddress	1.3.6.1.4.1.2014.15.2.1.3.5.7.1.2	octet string	read-only	Provision to set the IP address of the trap manager. Use Internet standard dot-decimal notation.
fwuTrapMgrListeningPort	1.3.6.1.4.1.2014.15.2.1.3.5.7.1.3	unsigned32	read-only	Provision to set the port at which the trap manager is listening for the traps. The default port for SNMP traps is 162.
fwuTrapMgrCommunity	1.3.6.1.4.1.2014.15.2.1.3.5.7.1.4	displaystring	read-only	The community used by the agent to send traps or informs to this manager.
fwuTrapVersion	1.3.6.1.4.1.2014.15.2.1.3.5.7.1.5	integer	read-only	The SNMP version used for this trap destination. The available versions are v1(0), v2c(1), inform(2) with v2c being set as default. Enumeration: 'v2c': 1, 'v1': 0, 'inform': 2.
fwuTrapMgrRowStatus	1.3.6.1.4.1.2014.15.2.1.3.5.7.1.6	rowstatus	read-only	The status of this conceptual row. This is used to manage the creation and deletion of this trap destination table.
fwuEnableNotifHysteresis	1.3.6.1.4.1.2014.15.2.1.3.5.8	integer	read-write	Provision to enable(1) or disable(0) event hysteresis. If disabled notification is sent out on occurance of the event. If enabled set the hysteresis value using fwuEventNotifHysteresis. Enumeration: 'enable': 1, 'disable': 0.
fwuEventNotifHysteresis	1.3.6.1.4.1.2014.15.2.1.3.5.9	integer32	read-write	Time period, in seconds, for which an event has to persist before a notification is sent. For this value to be useable, ensure that fwuEnableNotifHysteresis is enabled.
fwuEnableNotifInterval	1.3.6.1.4.1.2014.15.2.1.3.5.10	integer	read-write	Provision to enable(1) or disable(0) a time lag before sending out an event notification. If disabled, notification is sent out on the occurance of the event. If enabled, use fwuEventNotifInterval to set the lag. Enumeration: 'enable': 1, 'disable': 0.
fwuEventNotifInterval	1.3.6.1.4.1.2014.15.2.1.3.5.11	integer32	read-write	Provision to set the time lag in seconds between the successive event notifications. For this value to be useable, ensure that fwuEnableNotifInterval is enabled.
fwuSchedulerTable	1.3.6.1.4.1.2014.15.2.1.3.5.12		no-access	Table containing information about the trap destinations. For changes to take effect, a (Host) reboot is required.
fwuSchedulerEntry	1.3.6.1.4.1.2014.15.2.1.3.5.12.1		no-access	An entry in the fwuSchedulerTable.
fwuTaskId	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.1	integer	no-access	The unique index of the Scheduler table. Range limited to machine integer size(32 bit) restriction.
fwuTaskType	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.2	integer	read-only	The task to be scheduled. If System Test is the task being scheduled it requires some more arguments. Use fwuFunctionArgs to provide them. After specifying a task, enable the task using fwuScheduleStatus. Enumeration: 'systemTest': 2, 'iamAliveTrap': 5.
fwuScheduleStatus	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.3	integer	read-only	Provision to enable(1) or disable(0) the scheduled task (defined by fwuTaskType). Enumeration: 'enabled': 1, 'notEnabled': 0.
fwuTaskStartTime	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.4	displaystring	read-only	The start time of the scheduled activity.
fwuOccurrences	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.5	integer	read-only	Provision to set the number of times the task is to be executed. Set a value greater than 0 for a finite number of executions. To keep executing forever, set value to -1.
fwuRecurrence	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.6	displaystring	read-only	Provision to set the periodicity of the scheduled task. Eg. S5 is 5 Sec, H6 is 6 Hours, M8 is 8 Min. Note: This is also used for the time interval for sending I am alive traps.
fwuFunctionArgs	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.7	displaystring	read-only	Colon separated string of arguments required for the given task type. Can be empty depending on the task type.
fwuRowStatus	1.3.6.1.4.1.2014.15.2.1.3.5.12.1.8	rowstatus	read-only	The status of the conceptual row. This is used to manage the creation and deletion of the rows in scheduler table.
fwuContactAlarmObjects	1.3.6.1.4.1.2014.15.2.1.3.6
fwuContactAlarmInfo	1.3.6.1.4.1.2014.15.2.1.3.6.1
fwuSystemContactAlarmMgmtTable	1.3.6.1.4.1.2014.15.2.1.3.6.1.1		no-access	Entities in this table are applicable to all Prism and URH remote units. For Host and DRU, entities are applicable only for 2nd generation system cards and onwards.
fwuSystemContactAlarmMgmtEntry	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1		no-access	An entry (conceptual row) in the fwuSnmpTrapMgrConfigTable.
fwuUnitIndex	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.1	unitid2	read-only	The number of the connected unit.
fwuSYstemAlarmCode	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.2	unsigned32	read-only	A code that uniquely identifies an alarm.
fwuContactAlarm	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.3	displaystring	read-only	Hardware Assigned Name.
fwuContactAlarmMode	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.4	integer	read-write	Provision to set the mode of the alarm as normally closed (1) or normally open (2). Enumeration: 'normallyOpen': 2, 'normallyClose': 1.
fwuContactAlarmName	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.5	displaystring	read-write	User defined name of the host unit. All characters except angular brackets, single and double quotes are allowed. Minimum length of the name is 0 character (It may be empty.). Maximum length of the name is 64 characters.
fwuContactAlarmEnable	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.6	alarmenable	read-write	Provision to enable (1) or disable (0) the contact alarm. The alarm is enabled by default.
fwuContactAlarmSeverity	1.3.6.1.4.1.2014.15.2.1.3.6.1.1.1.7	integer	read-write	Severity of the alarm. Enumeration: 'major': 3, 'minor': 2.
fwuContactAlarmTraps	1.3.6.1.4.1.2014.15.2.1.3.6.2
fwuHstContactAlarmOutput1	1.3.6.1.4.1.2014.15.2.1.3.6.2.1			Host contact output port state.
fwuHstContactAlarmOutput2	1.3.6.1.4.1.2014.15.2.1.3.6.2.2			Host contact output port state.
fwuHstContactAlarmInput1	1.3.6.1.4.1.2014.15.2.1.3.6.2.3			Host contact input port state.
fwuHstContactAlarmInput2	1.3.6.1.4.1.2014.15.2.1.3.6.2.4			Host contact input port state.
fwuRmtContactAlarmInput1	1.3.6.1.4.1.2014.15.2.1.3.6.2.5			Remote contact input port state- Summary of all connected remotes.
fwuRmtContactAlarmInput2	1.3.6.1.4.1.2014.15.2.1.3.6.2.6			Remote contact input port state- Summary of all connected remotes.
fwuRmtContactAlarmOutput1	1.3.6.1.4.1.2014.15.2.1.3.6.2.7			Remote contact output port state- Summary of all connected remotes.
fwuRmtContactAlarmOutput2	1.3.6.1.4.1.2014.15.2.1.3.6.2.8			Remote contact output port state- Summary of all connected remotes.
fwuSystemStaticAlarms	1.3.6.1.4.1.2014.15.2.1.3.7
fwuSystemStaticAlarmsTable	1.3.6.1.4.1.2014.15.2.1.3.7.1		no-access	This is a static alarm table containing the statistics of units in the system. The major and minor alarms will be grouped separately for each of the units.
fwuSystemStaticAlarmsEntry	1.3.6.1.4.1.2014.15.2.1.3.7.1.1		no-access	Entries for units which can be either alarmed or not alarmed or not-discovered.
fwuSystemUnitID	1.3.6.1.4.1.2014.15.2.1.3.7.1.1.1	unitid2	read-only	The ID of the unit from which the alarms has been raised.
fwuSystemUnitType	1.3.6.1.4.1.2014.15.2.1.3.7.1.1.2	unittype	read-only	The type of the from which the alarm has been raised.
fwuUnitMajorAlarms	1.3.6.1.4.1.2014.15.2.1.3.7.1.1.3	displaystring	read-only	The major alarm name of the unit.
fwuUnitMinorAlarms	1.3.6.1.4.1.2014.15.2.1.3.7.1.1.4	displaystring	read-only	The minor alarm name of the unit.
flexwaveurhMIBConformance	1.3.6.1.4.1.2014.15.2.1.4
flexwaveurhMIBCompliances	1.3.6.1.4.1.2014.15.2.1.4.1
flexwaveurhBasicCompliance	1.3.6.1.4.1.2014.15.2.1.4.1.1			The compliance statement for Flexwave entities which implement the ADC-FLEXWAVE-URH-MIB.
flexwaveurhMIBGroups	1.3.6.1.4.1.2014.15.2.1.4.2
fwuSerfGroup	1.3.6.1.4.1.2014.15.2.1.4.2.1			A collection of Host and Remote SERF objects.
fwuOpticsGroup	1.3.6.1.4.1.2014.15.2.1.4.2.2			A collection of Host and Remote Optical and Ethernet port objects.
fwuDartGroup	1.3.6.1.4.1.2014.15.2.1.4.2.3			A collection of Host and Remote DART objects.
fwuLnaGroup	1.3.6.1.4.1.2014.15.2.1.4.2.4			A collection of Host and Remote LNA objects.
fwuLpaGroup	1.3.6.1.4.1.2014.15.2.1.4.2.5			A collection of Host and Remote LPA objects.
fwuDuplexerGroup	1.3.6.1.4.1.2014.15.2.1.4.2.6			A collection of Host and Remote Duplexer objects.
fwuAlarmConfigGroup	1.3.6.1.4.1.2014.15.2.1.4.2.7			A collection of Host and Remote Alarm configuration objects.
fwuNotificationGroup	1.3.6.1.4.1.2014.15.2.1.4.2.8			A collection of Host and Remote Notification objects.
fwuLinkingGroup	1.3.6.1.4.1.2014.15.2.1.4.2.9			A collection of RF linking configuration objects.
fwuMateInfoGroup	1.3.6.1.4.1.2014.15.2.1.4.2.10			A collection of mate information objects.
fwuSprintModeGroup	1.3.6.1.4.1.2014.15.2.1.4.2.11			A collection of objects supported in Sprint mode Objects.
fwuSNMPSettingGroup	1.3.6.1.4.1.2014.15.2.1.4.2.12			A collection of objects supported in System Link test.
fwuSystemStaticAlarmsGroup	1.3.6.1.4.1.2014.15.2.1.4.2.13			A collection of objects supported in Static Alarms Table.