ACMIB: View SNMP OID List / Download MIB

VENDOR: LUCENT TECHNOLOGIES


 Home MIB: ACMIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lucent 1.3.6.1.4.1.1751
           mibs 1.3.6.1.4.1.1751.2
               acMIB 1.3.6.1.4.1.1751.2.18
Lucent Access Concentrator, Release 6.2
                     sysConfig 1.3.6.1.4.1.1751.2.18.1
                         siteName 1.3.6.1.4.1.1751.2.18.1.1 displaystring read-write
site name - ascii
                         siteID 1.3.6.1.4.1.1751.2.18.1.2 octet string read-write
site id - numerical
                         siteEtherIpAddr 1.3.6.1.4.1.1751.2.18.1.3 ipaddress read-write
ip address for ethernet access to the site (switch)
                         siteEtherIpMask 1.3.6.1.4.1.1751.2.18.1.4 ipaddress read-write
ip mask for ethernet access to the site (switch)
                         siteGatewayAddr 1.3.6.1.4.1.1751.2.18.1.5 ipaddress read-write
ip address for gateway access to the site (switch)
                         siteAtmAddrPrefix1 1.3.6.1.4.1.1751.2.18.1.6 octet string read-write
This is one of the two atm address prefix of this switch.
                         siteAtmAddrUser1 1.3.6.1.4.1.1751.2.18.1.7 octet string read-write
This is one of the two atm address user part of this switch.
                         siteRemoteMgrAddr1 1.3.6.1.4.1.1751.2.18.1.8 ipaddress read-write
remote manager IP Address, where TRAP will be sent to.
                         siteRemoteMgrAddr2 1.3.6.1.4.1.1751.2.18.1.9 ipaddress read-write
remote manager IP Address, where TRAP will be sent to.
                         siteRemoteMgrAddr3 1.3.6.1.4.1.1751.2.18.1.10 ipaddress read-write
remote manager IP Address, where TRAP will be sent to.
                         siteRemoteMgrAddr4 1.3.6.1.4.1.1751.2.18.1.11 ipaddress read-write
remote manager IP Address, where TRAP will be sent to.
                         siteRemoteMgrAddr5 1.3.6.1.4.1.1751.2.18.1.12 ipaddress read-write
remote manager IP Address, where TRAP will be sent to.
                         siteMasterNodeAtmAddr1 1.3.6.1.4.1.1751.2.18.1.13 octet string read-write
Master node atm address, where TRAP will be sent to.
                         siteMasterNodeAtmAddr2 1.3.6.1.4.1.1751.2.18.1.14 octet string read-write
Master node atm address, where TRAP will be sent to.
                         siteEnhanceFeatures 1.3.6.1.4.1.1751.2.18.1.15 integer read-only
enhancement features capability - number consists of a sum to represent the following: 1: securedAtm 2: isdn 4: frameRelay
                         siteTrapDialOutFeature 1.3.6.1.4.1.1751.2.18.1.16 integer read-write
Enables the dialing out to a remote terminal or beeper for trap notification. Enumeration: 'disabled': 1, 'dialTerminal': 2, 'dialBeeper': 3.
                         siteTrapDialOutPhoneNum 1.3.6.1.4.1.1751.2.18.1.17 displaystring read-write
Phone number of the terminal to dial when trap notifications are phoned out
                         siteTrapDialOutBeeperData 1.3.6.1.4.1.1751.2.18.1.18 displaystring read-write
Data (phone digits) to send to beeper if the dialBeeper option is selected.
                         siteDateAndTime 1.3.6.1.4.1.1751.2.18.1.19 dateandtime read-write
Current date and time: 11 octets octet# contents range ------ -------- ----- 1-2 year 0..65536 3 month 1..12 4 day 1..31 5 hour 0..23 6 minutes 0..59 7 seconds 0..60(60=leap second) 8 deci-seconds 0..9 9 direction from UTC '+'/'-' 10 hours from UTC 0..11 11 minutes from UTC 0..59
                         siteSoftwareVersion 1.3.6.1.4.1.1751.2.18.1.20 displaystring read-only
Constant value representing the version number of the current software.
                         csTcpServerIpAddress 1.3.6.1.4.1.1751.2.18.1.21 ipaddress read-write
The IP address of CS
                         csTcpServerPortNumber 1.3.6.1.4.1.1751.2.18.1.22 integer read-write
The Port Number used for communication with CS. NOTE: Port # 5000 and 6000 have been reservered for AC products. DO NOT USED THEM !!!
                         keepAliveTimer 1.3.6.1.4.1.1751.2.18.1.23 integer read-write
keep alive timer can be set inbetween 0 and 999999999
                         inactiveTimer 1.3.6.1.4.1.1751.2.18.1.24 integer read-write
inactive timer can be set inbetween 0 and 999999999
                         siteMasterNodeAddrType1 1.3.6.1.4.1.1751.2.18.1.25 integer read-write
Type of address specified for master node atm address, where TRAP will be sent to. Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                         siteMasterNodeAddrType2 1.3.6.1.4.1.1751.2.18.1.26 integer read-write
Type of address specified for master node atm address, where TRAP will be sent to. Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                         inBandPrimaryIpAddress 1.3.6.1.4.1.1751.2.18.1.27 ipaddress read-write
IP address of the switch when the switch is accessed over the primary in-band connection.
                         inBandPrimaryIpMask 1.3.6.1.4.1.1751.2.18.1.28 octet string read-write
IP address subnet mask of the primary in-band management IP address.
                         inBandBackupIpAddress 1.3.6.1.4.1.1751.2.18.1.29 ipaddress read-only
IP address of the switch when the switch is accessed over the secondary in-band connection.
                         inBandBackupIpMask 1.3.6.1.4.1.1751.2.18.1.30 octet string read-only
IP address subnet mask of the secondary in-band management IP address.
                         inBandSvcConnectionsAllowed 1.3.6.1.4.1.1751.2.18.1.31 integer read-write
Flag indicating whether in-band management should be supported over SVCs. Enumeration: 'disabled': 2, 'enabled': 1.
                         atmArpServer 1.3.6.1.4.1.1751.2.18.1.32 integer read-write
This flag indicates if this switch is an ATM ARP server. Enumeration: 'disabled': 2, 'enabled': 1.
                         atmArpServerRemoteConnectionType 1.3.6.1.4.1.1751.2.18.1.33 integer read-write
When this switch is not the ATM ARP server, indicates whether the connection to the ATM ARP server uses SVCs or PVCs. Enumeration: 'pvc': 2, 'svc': 1.
                         atmArpServerRemoteAtmAddress 1.3.6.1.4.1.1751.2.18.1.34 octet string read-write
The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs.
                         atmArpServerRemoteAddrType 1.3.6.1.4.1.1751.2.18.1.35 integer read-write
The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                         atmArpServerRemoteIpAddress 1.3.6.1.4.1.1751.2.18.1.36 ipaddress read-write
The IP address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs.
                         atmArpServerRemoteIpMask 1.3.6.1.4.1.1751.2.18.1.37 octet string read-write
The IP address subnet mask of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs.
                         atmArpServerEncapsulation 1.3.6.1.4.1.1751.2.18.1.38 integer read-only
The type of encapsulation used for IP packets over ATM in in-band management. Enumeration: 'llc-snap': 1.
                         siteFallbackSoftwareVersion 1.3.6.1.4.1.1751.2.18.1.41 displaystring read-only
Constant value representing the version number of the software to fallback to.
                         siteUpgradeSoftwareVersion 1.3.6.1.4.1.1751.2.18.1.42 displaystring read-only
Constant value representing the version number of the software to upgrade to.
                         siteSwitchIpAddr 1.3.6.1.4.1.1751.2.18.1.43 ipaddress read-write
IP Address for communication with the switch, regardless of which cpu is primary.
                         muxTcpType 1.3.6.1.4.1.1751.2.18.1.44 integer read-write
The type of mux TCP. Enumeration: 'client': 2, 'server': 1.
                         loopbackLocationID 1.3.6.1.4.1.1751.2.18.1.45 octet string read-write
ID of the ATM Node where the loopback is to occur.
                         oamDebouncingPeriod 1.3.6.1.4.1.1751.2.18.1.46 integer read-write
Debouncing period in milli seconds for clearing AIS/RDI state.
                         svcPointToPointCalls 1.3.6.1.4.1.1751.2.18.1.47 integer32 read-write
The total number of SVC point-to-point calls, both legs are SVCs.
                         svcPointToMultiPointCalls 1.3.6.1.4.1.1751.2.18.1.48 integer32 read-write
The total number of SVC point-to-multipoint calls, both legs are SVCs.
                         svcPointToMultiPointParties 1.3.6.1.4.1.1751.2.18.1.49 integer32 read-write
The total number of parties on SVC point-to-multipoint calls, both legs are SVCs.
                         spvcCePointToPointCalls 1.3.6.1.4.1.1751.2.18.1.50 integer32 read-write
The total number of circuit emulation SPVC calls.
                         spvcTePointToPointCalls 1.3.6.1.4.1.1751.2.18.1.51 integer32 read-write
The total number of terminal emulation SPVC calls.
                         spvcAtmPointToPointCalls 1.3.6.1.4.1.1751.2.18.1.52 integer32 read-write
The total number of ATM SPVC calls.
                         cgApiCirEmCirEmPvcCalls 1.3.6.1.4.1.1751.2.18.1.53 integer32 read-write
The total number of circuit emulation to circuit emulation calls for Sapphire API.
                         cgApiCirEmAtmPvcCalls 1.3.6.1.4.1.1751.2.18.1.54 integer32 read-write
The total number of circuit emulation to ATM calls for Sapphire APIs
                         cgApiAtmAtmPvcCalls 1.3.6.1.4.1.1751.2.18.1.55 integer32 read-write
The total number of ATM to ATM calls for Sapphire APIs
                         cgApiPointToPointSvcCalls 1.3.6.1.4.1.1751.2.18.1.56 integer32 read-write
The total number of point-to-point SVC calls for Sapphire APIs
                         cgApiPointToMultiPointSvcCalls 1.3.6.1.4.1.1751.2.18.1.57 integer32 read-write
The total number of point-to-multipoint SVC calls for Sapphire APIs
                         cgApiPointToMultiPointParties 1.3.6.1.4.1.1751.2.18.1.58 integer32 read-write
The total number of parties for Sapphire APIs
                         callContrlResAllocApply 1.3.6.1.4.1.1751.2.18.1.59 integer read-write
0 - not apply, 1 - apply the call control resouce allocation modification
                         callContrlResAllocUsage 1.3.6.1.4.1.1751.2.18.1.60 integer32 read-only
The percentage of memory usage for call control resource.
                         siteFirmwarePatchNumber 1.3.6.1.4.1.1751.2.18.1.61 integer32 read-only
Constant value representing the patch number of the patch release.
                         spvcActRestartAll 1.3.6.1.4.1.1751.2.18.1.62 integer read-write
Restart all ATM-to-ATM,CE-to-CE,TE-to-TE,FR-to-FR active unconnected spvc connections Enumeration: 'spvcActTeRestartAll': 3, 'spvcActFrRestartAll': 4, 'spvcActCeRestartAll': 2, 'spvcActAtmRestartAll': 1.
                         cgSvcCutThroughOption 1.3.6.1.4.1.1751.2.18.1.63 integer read-write
Cut Through option for SVC calls going to CG cgSvcAcImplicitCutThrough (1) - AC implicitly cuts through. cgSvcCgExplicitCutThrough (2) - CG sends explcit PATH_ETABLISH_REQ to request AC to cut through. Enumeration: 'cgSvcAcImplicitCutThrough': 1, 'cgSvcCgExplicitCutThrough': 2.
                         sgApiCirEmEndPoints 1.3.6.1.4.1.1751.2.18.1.64 integer32 read-write
The total number of circuit emulation endpoints for Sapphire API.
                         sgApiAtmSvcEndPoints 1.3.6.1.4.1.1751.2.18.1.65 integer32 read-write
The total number of ATM SVC endpoints for Sapphire APIs
                         siteRemoteMgrSrcAddr1 1.3.6.1.4.1.1751.2.18.1.66 integer read-write
This is the source IP address used in all traps sent to remote manager Enumeration: 'interface': 3, 'ethernet': 1, 'ibm': 2.
                         siteRemoteMgrSrcAddr2 1.3.6.1.4.1.1751.2.18.1.67 integer read-write
This is the source IP address used in all traps sent to remote manager Enumeration: 'interface': 3, 'ethernet': 1, 'ibm': 2.
                         siteRemoteMgrSrcAddr3 1.3.6.1.4.1.1751.2.18.1.68 integer read-write
This is the source IP address used in all traps sent to remote manager Enumeration: 'interface': 3, 'ethernet': 1, 'ibm': 2.
                         siteRemoteMgrSrcAddr4 1.3.6.1.4.1.1751.2.18.1.69 integer read-write
This is the source IP address used in all traps sent to remote manager Enumeration: 'interface': 3, 'ethernet': 1, 'ibm': 2.
                         siteRemoteMgrSrcAddr5 1.3.6.1.4.1.1751.2.18.1.70 integer read-write
This is the source IP address used in all traps sent to remote manager Enumeration: 'interface': 3, 'ethernet': 1, 'ibm': 2.
                         spvcFrPointToPointCalls 1.3.6.1.4.1.1751.2.18.1.71 integer32 read-write
The total number of FR SPVC calls.
                         inBandAppAtmAddress 1.3.6.1.4.1.1751.2.18.1.72 octet string read-write
The ATM address of the inBand application
                         inBandAppAtmAddrType 1.3.6.1.4.1.1751.2.18.1.73 integer read-write
The format of the ATM address of the inBand application Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                         atmArpServer2RemoteAtmAddress 1.3.6.1.4.1.1751.2.18.1.74 octet string read-write
The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs.
                         atmArpServer2RemoteAddrType 1.3.6.1.4.1.1751.2.18.1.75 integer read-write
The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs. Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                         tasmMaxAnnceDiskSpace 1.3.6.1.4.1.1751.2.18.1.76 integer read-write
Specifies the maximum disk size in MBytes reserved for compressed announcements on the CPU hard disk.
                         tasmMaxAnnce 1.3.6.1.4.1.1751.2.18.1.77 integer read-write
Specifies the maximum number of tones and announcements that can be played simultaneously. This will depend on the number of control blocks allocated for collecting digits and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this.
                         tasmMaxStdTones 1.3.6.1.4.1.1751.2.18.1.78 integer read-write
Specifies the maximum number of tones that can be played simutaneously. This field has been obsoleted for optimisation of resources.
                         tasmMemoryAction 1.3.6.1.4.1.1751.2.18.1.79 integer read-write
Specifies the action to be performed on the memory in the TASM card used for storing announcements. Enumeration: 're-initialize': 1.
                         tasAnnceTable 1.3.6.1.4.1.1751.2.18.1.80 no-access
Table of announcements for the Tone Announcement server .
                               tasAnnceEntry 1.3.6.1.4.1.1751.2.18.1.80.1 no-access
Row definition for Tone Announcement server table announcement entries.
                                   tasAnnceId 1.3.6.1.4.1.1751.2.18.1.80.1.1 integer no-access
Announcement ID.
                                   tasAnnceType 1.3.6.1.4.1.1751.2.18.1.80.1.2 integer read-only
The type of this announcement: voice indicates it is a pure voice announcement file. toneVoice indicates it is a file with tones at the beginning followed by voice. userTones indicates it is a file with purely user generated tones. music indicates it is a file with pure music. musicVoice indicates it is a file with music at the beginning followed by voice. toneMusic indicates it is a file with tones at the beginning followed by music. Enumeration: 'musicVoice': 5, 'music': 4, 'userTones': 3, 'toneVoice': 2, 'toneMusic': 6, 'voice': 1.
                                   tasAnnceCmprsType 1.3.6.1.4.1.1751.2.18.1.80.1.3 integer read-only
The type of compression used for storing this announcement: compress8k indicates 8k compression algorithm should be used. compress16k indicates 16k compression algorithm should be used. compress32k indicates 32k compression algorithm should be used. Enumeration: 'compress16k': 3, 'compress8k': 2, 'uncompressed': 1, 'compress32k': 4.
                                   tasAnnceValid 1.3.6.1.4.1.1751.2.18.1.80.1.4 integer read-only
Indicates the condition of this announcement, whether it is good, it is stored using an older compression algorithm, or it is corrupted. Enumeration: 'olderVersion': 2, 'good': 1, 'corrupted': 3.
                                   tasAnnceDescription 1.3.6.1.4.1.1751.2.18.1.80.1.5 displaystring read-only
Description for this announcement.
                         tasToneConfigTable 1.3.6.1.4.1.1751.2.18.1.81 no-access
Table of standard physical tone attributes
                               tasToneConfigEntry 1.3.6.1.4.1.1751.2.18.1.81.1 no-access
Row definition for TASM announcement entries.
                                   tasToneId 1.3.6.1.4.1.1751.2.18.1.81.1.1 integer no-access
Tone ID.
                                   tasToneType 1.3.6.1.4.1.1751.2.18.1.81.1.2 integer read-write
The type of this standard tone. Enumeration: 'sitTone': 3, 'reorderTone': 2, 'dialTone': 1.
                                   tasToneFirstFreq 1.3.6.1.4.1.1751.2.18.1.81.1.3 integer32 read-write
The first frequency value for this tone.
                                   tasToneSecondFreq 1.3.6.1.4.1.1751.2.18.1.81.1.4 integer32 read-write
The second frequency value for this tone.
                                   tasToneThirdFreq 1.3.6.1.4.1.1751.2.18.1.81.1.5 integer32 read-write
The third frequency value for this tone.
                                   tasToneOnTime 1.3.6.1.4.1.1751.2.18.1.81.1.6 integer32 read-write
The on time in the tone duty cycle.
                                   tasToneOffTime 1.3.6.1.4.1.1751.2.18.1.81.1.7 integer32 read-write
The off time in the tone duty cycle.
                                   tasToneLevel 1.3.6.1.4.1.1751.2.18.1.81.1.8 integer32 read-write
The level of this tone in dBm.
                         atmArpServerAtmAddr 1.3.6.1.4.1.1751.2.18.1.82 octet string read-write
The ATM address of the ATM ARP server when this switch is configured as the ATM ARP server .
                         atmArpServerAddrType 1.3.6.1.4.1.1751.2.18.1.83 integer read-write
The format of the ATM address of the ATM ARP server when this switch is configured as the ATM ARP server. Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                         spvcPointToMultiPointCalls 1.3.6.1.4.1.1751.2.18.1.84 integer32 read-write
The total number of SPVC point-to-multipoint calls
                         spvcPointToMultiPointParties 1.3.6.1.4.1.1751.2.18.1.85 integer32 read-write
The total number of parties on SPVC point-to-multipoint calls.
                         consoleIPAddr1 1.3.6.1.4.1.1751.2.18.1.86 ipaddress read-write
console IP Address, where TRAP will be sent.
                         consoleIPAddr2 1.3.6.1.4.1.1751.2.18.1.87 ipaddress read-write
console IP Address, where TRAP will be sent.
                         consoleIPAddr3 1.3.6.1.4.1.1751.2.18.1.88 ipaddress read-write
console IP Address, where TRAP will be sent.
                         consolePort1 1.3.6.1.4.1.1751.2.18.1.89 integer read-write
port number on host where TRAP will be sent
                         consolePort2 1.3.6.1.4.1.1751.2.18.1.90 integer read-write
port number on host where TRAP will be sent
                         consolePort3 1.3.6.1.4.1.1751.2.18.1.91 integer read-write
port number on host where TRAP will be sent
                         featureTable 1.3.6.1.4.1.1751.2.18.1.92 no-access
Table of features to be turned on/off
                               featureEntry 1.3.6.1.4.1.1751.2.18.1.92.1 no-access
Row definition for feature table
                                   featureId 1.3.6.1.4.1.1751.2.18.1.92.1.1 integer no-access
feature ID. Enumeration: 'gr303': 2, 'pnni': 1, 'h248': 4, 'vipr': 3.
                                   featureStaticMem 1.3.6.1.4.1.1751.2.18.1.92.1.2 integer32 read-only
Minimum memory required to run this feature
                                   featureDesiredStatus 1.3.6.1.4.1.1751.2.18.1.92.1.3 integer read-write
To enable / disable this feature Enumeration: 'enable': 1, 'disable': 2.
                                   featureCurrentStatus 1.3.6.1.4.1.1751.2.18.1.92.1.4 integer read-only
This feature is enabled / disabled Enumeration: 'disabled': 2, 'enabled': 1.
                         mediaGatewayControlType 1.3.6.1.4.1.1751.2.18.1.93 integer read-write
Choose to use H.248 protocol or sapphire protocol Enumeration: 'h248': 2, 'sapphire': 1.
                         dspResourceTable 1.3.6.1.4.1.1751.2.18.1.94 no-access
Table of DSP resource usage for the whole system.
                               dspResourceEntry 1.3.6.1.4.1.1751.2.18.1.94.1 no-access
Row definition for DSP resource usage table entries.
                                   dspResourceId 1.3.6.1.4.1.1751.2.18.1.94.1.1 integer no-access
DSP resource type enumerations. The algoSets describe the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. Aal modes describe the aal type used. algoSet1-aal2-non-multiplexed: resource type for algoSet1 DSP mode and non-multiplexed aal2 AAL mode. algoSet1-aal2-std : resource type for algoSet1 DSP mode and standard aal2 AAL mode. algoSet2-aal2-non-multiplexed: resource type for algoSet2 DSP mode and non-multiplexed aal2 AAL mode.aal2 AAL mode. algoSet2-aal2-std: resource type for algoSet2 DSP mode and standard aal2 AAL mode. algoSet3-aal2-non-multiplexed: resource type for algoSet3 DSP mode and non-multiplexed aal2 AAL mode. algoSet3-aal2-std: resource type for algoSet3 DSP mode and standard aal2 AAL mode. algoSet5-aal1: resource type for algoSet5 DSP mode and aal1 AAL mode. algoSet6-aal2-std: resource type for algoSet6 DSP mode and standard aal2 AAL mode. tone-annce-cas: resource type for the tone announcement interface and CAS mode of the TASM card. tone-annce-tas: resource type for the tone announcement interface and TAS mode of the TASM card. Enumeration: 'algoSet3-aal2-std': 6, 'algoSet3-aal2-non-multiplexed': 5, 'algoSet2-aal2-std': 4, 'tone-annce-tas': 10, 'tone-annce-cas': 9, 'algoSet6-aal2-std': 8, 'algoSet1-aal2-std': 2, 'algoSet1-aal2-non-multiplexed': 1, 'algoSet2-aal2-non-multiplexed': 3, 'algoSet5-aal1': 7.
                                   dspResourceAvail 1.3.6.1.4.1.1751.2.18.1.94.1.2 integer32 read-only
The available DSP resource counts how many connections can be made using this available DSP resource type in the system.
                                   dspResourceUsed 1.3.6.1.4.1.1751.2.18.1.94.1.3 integer32 read-only
The used DSP resource counts how many connections are already made using this available DSP resource type in the system.
                                   dspResourceUsedFailed 1.3.6.1.4.1.1751.2.18.1.94.1.4 integer32 read-only
The used but failed DSP resource counts how many connections are already made using currently failed DSP resource type in the system.
                                   dspResourceAvailFailed 1.3.6.1.4.1.1751.2.18.1.94.1.5 integer32 read-only
The available but failed DSP resource counts how many connections can be made if using currently failed DSP resource type in the system.
                         tasmMaxDigitControlBlocks 1.3.6.1.4.1.1751.2.18.1.95 integer read-write
Specifies the maximum number of digit collection that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing tones and announcements and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this .
                         tasmMaxTestControlBlocks 1.3.6.1.4.1.1751.2.18.1.96 integer read-write
Specifies the maximum number of TDM line tests that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing tones and announcements and for digit collection as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this.
                         tasmMaxMemResvd 1.3.6.1.4.1.1751.2.18.1.97 integer32 read-only
Specifies the maximum amount of memory in megabytes reserved for TASM.
                         tasmControlBlockResAllocUsage 1.3.6.1.4.1.1751.2.18.1.98 integer32 read-only
The percentage of memory usage for tones, announcements, digit collection and line tests control blocks.
                         tasmAnnceCacheMemResAllocUsage 1.3.6.1.4.1.1751.2.18.1.99 integer32 read-only
The percentage of memory usage for caching announcements in memory. Everytime an announcement is compressed this field will be updated to reflect the cache memory that will be taken up by this announcement. Once this field shows a 100 percent usage it is an indication to the user that any additional announcement will cause the system to thrash as it clears an announcement in cache to make room for the new announcement.
                         siteAlternateGatewayAddr 1.3.6.1.4.1.1751.2.18.1.100 ipaddress read-write
Alternate ip address of gateway to access the site (switch),Can be used only over the InBand PVC connection when the OAM is enabled on InBand PVCs
                         ipThrottlingConfig 1.3.6.1.4.1.1751.2.18.1.101
                                 ipThrottlingFeatureStatus 1.3.6.1.4.1.1751.2.18.1.101.1 integer read-write
CPU card IP throttling feature: off/on Enumeration: 'disabled': 0, 'enabled': 1.
                                 ipThrottlingAllowedInFrameRate 1.3.6.1.4.1.1751.2.18.1.101.2 integer read-write
CPU card IP throttling: allowed input frames per second
                                 ipThrottlingLeakyBucketSize 1.3.6.1.4.1.1751.2.18.1.101.3 integer read-write
CPU card IP throttling: the size of leaky bucket
                                 ipThrottlingStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.1.101.4 integer32 read-only
CPU card IP throttling: Number of seconds since odometer was reset.
                                 ipThrottlingStatsOdometerReset 1.3.6.1.4.1.1751.2.18.1.101.5 integer read-write
CPU card IP throttling: Odometer reset button. Enumeration: 'reset': 1.
                                 ipThrottlingInPackets 1.3.6.1.4.1.1751.2.18.1.101.6 integer32 read-only
CPU card IP throttling: the total number of input packets from both Ethernet port and In-band-mgmt of the CPU card.
                                 ipThrottlingInPacketsPassedEi 1.3.6.1.4.1.1751.2.18.1.101.7 integer32 read-only
CPU card IP throttling: the number of input packets passed through the Ethernet port of the CPU card.
                                 ipThrottlingInPacketsDroppedEi 1.3.6.1.4.1.1751.2.18.1.101.8 integer32 read-only
CPU card IP throttling: the number of input packets dropped from the Ethernet port of the CPU card.
                                 ipThrottlingInPacketsPassedIBM 1.3.6.1.4.1.1751.2.18.1.101.9 integer32 read-only
CPU card IP throttling: the number of input packets passed from the In-Band-Management of the CPU card.
                                 ipThrottlingInPacketsDroppedIBM 1.3.6.1.4.1.1751.2.18.1.101.10 integer32 read-only
CPU card IP throttling: the number of input packets dropped from the In-Band-Management of the CPU card.
                         csSapphireInterfaceAddress 1.3.6.1.4.1.1751.2.18.1.102 ipaddress read-write
The IP address to be specified as the source address in the TCP connect message that is sent to the SoftSwitch running as server and PSAX running as client.
                         trapActivationTable 1.3.6.1.4.1.1751.2.18.1.103 no-access
Table of traps be turned on/off
                                 trapActivationEntry 1.3.6.1.4.1.1751.2.18.1.103.1 no-access
Row definition for trapActivation table
                                     trapGroupId 1.3.6.1.4.1.1751.2.18.1.103.1.1 integer no-access
trap group ID. Enumeration: 'connectionEvents': 4, 'systemEvents': 1, 'interfaceEvents': 3, 'moduleEvents': 2.
                                     trapIndex 1.3.6.1.4.1.1751.2.18.1.103.1.2 integer32 no-access
trap index in each group.
                                     trapActivationStatus 1.3.6.1.4.1.1751.2.18.1.103.1.3 integer read-write
activated: trap message activated. deactivated: trap message deactivated. permanently-activated: trap message can not be deactivated. Enumeration: 'permanently-activated': 3, 'deactivated': 2, 'activated': 1.
                                     trapNames 1.3.6.1.4.1.1751.2.18.1.103.1.4 displaystring read-only
Name of the trap
                                     resetAction 1.3.6.1.4.1.1751.2.18.1.103.1.5 integer read-write
set-all-active: set all trap active one group. set-all-deactive: set all trap deactive in a group. Enumeration: 'set-all-active': 1, 'set-all-deactive': 2.
                         spvcGlobalPriorityScheme 1.3.6.1.4.1.1751.2.18.1.104 integer read-write
Flag indicating whether priority scheme should be supported across SPVCs and SPVC-trunks. Enumeration: 'disabled': 2, 'enabled': 1.
                         spvcPriorityScheme 1.3.6.1.4.1.1751.2.18.1.105 integer read-write
Flag indicating whether priority scheme should be supported in SPVCs. Enumeration: 'disabled': 2, 'enabled': 1.
                         spvcTrunkingPriorityScheme 1.3.6.1.4.1.1751.2.18.1.106 integer read-write
Flag indicating whether priority scheme should be supported in SPVC-trunks. Enumeration: 'disabled': 2, 'enabled': 1.
                         atmTrunkVccs 1.3.6.1.4.1.1751.2.18.1.107 integer32 read-write
The total number of ATM Trunk VCCs (including SigVccs and Bearer Vccs).
                         atmTrunkNarrowBandCalls 1.3.6.1.4.1.1751.2.18.1.108 integer32 read-write
The total number of ATM Trunking Narrow Band Calls supported
                         dspResourceFeatureConfig 1.3.6.1.4.1.1751.2.18.1.109
                                 dspReroutingFeature 1.3.6.1.4.1.1751.2.18.1.109.1 integer read-write
Dsp2 Rerouting Feature.This is used to enable or disable rerouting of connections when a dsp chip or card fails. Enumeration: 'disabled': 1, 'auto-rerouting-enabled': 2.
                     equipConfig 1.3.6.1.4.1.1751.2.18.2
                         cardTable 1.3.6.1.4.1.1751.2.18.2.1 no-access
Table of card configuration data
                             cardEntry 1.3.6.1.4.1.1751.2.18.2.1.1 no-access
Row definition for ac120 card
                                 cardSlot 1.3.6.1.4.1.1751.2.18.2.1.1.1 integer no-access
Physical slot location. Valid range is a number between 1 and 24.
                                 cardType 1.3.6.1.4.1.1751.2.18.2.1.1.2 integer read-only
Type of card in a physical slot. A specific type of card is associated with each number. none(1) no board present taxi(2) Taxi oC-3c(3) OC3 dS3-ATM(4) DS3 ATM dS1-CE(5) DS1 circuit emulation dS1-ATM(6) DS1 ATM e1-CE(7) E1 circuit emulation e3-ATM(8) E3 ATM highSpeed(9) High Speed Serial mSerial(10) Multi Serial dSP1(11) DSP tWStation(12) Two Wire Station tWOffice(13) Two Wire Office cPU(14) Central Processor Unit stratum(15) Stratum pwrSupply(16) Power Supply protectionCard(17) protection card e1-ATM(18) E1 ATM ethernet(19) Ethernet enhDS1(20) Enhanced DS1 enhE1(21) Enhanced E1 oC-3cMMAQ(22) OC3 Multimode Aqueman oC-3cMMTS(23) OC3 Multimode Traffic Shaping oC-3cSMAQ(24) OC3 Singlemode Aqueman oC-3cSMTS(25) OC3 Singlemode Traffic Shaping sTM-1SMAQ(26) STM1 Singlemode Aqueman sTM-1SMTS(27) STM1 Singlemode Traffic Shaping sTM-1MMAQ(28) STM1 Multimode Aqueman sTM-1MMTS(29) STM1 Multimode Traffic Shaping dS3-FR(30) DS3 Frame Relay dSP2A(31) DSP2 card revision 2A dS1-IMA(32) DS1 Inverse Multiplexing over ATM (IMA) I/O card e1-IMA(33) E1 IMA alarm(34) alarm card dSP2B(35) DSP card revision 2B aps-OC-3cSM(36) Automatic Protection Switching OC3 Single Mode aps-OC-3cMM(37) Automatic Protection Switching OC3 Multi Mode msp-STM-1SM(38) Multi Switch Protection STM1 Singemode msp-STM-1MM(39) Multi Switch Protection STM1 Multimode cH-DS3(40) Channelized DS3 cH-STS1(41) Channelized STS1 rT-S(42) Route Server cC-Server(43) Continuity Check Server hD-E1(44) High Density E1 hD-DS1(45) High Density DS1 dS3-IMA(46) DS3 IMA dSP2C(47) DSP card revision 2C tasm(48) Tone Announcement Service Module mD-DS1(49) Medium Density DS1 quadSerial(50) Quad Serial mD-DS1-IMA(51) Medium Density DS1 IMA mD-E1-IMA(52) Medium Density E1 IMA hD-DS1-IMA(53) High Density DS1 IMA hD-E1-IMA(54) High Density E1 IMA chDS3STS1-3P(55) 3-port channelized DS3 STS1 unstDS3E3-3P(56) 3-port unstructured DS3 E3 dS3E3-ATM-3P(57) 3-port DS3 E3 ATM oC12c-STM4-MM(58) OC12 STM4 Multimode oC12c-STM4-SM(59) OC12 STM4 Singlemode dSP2D(60) DSP card revision 2D ethernet-4P(61) 4-port Ethernet chDS3STS1-3P-Prot(62) 3-port channelized DS3 STS1 protection alarm-fan(63) alarm fan card dS1-Nx64CAS(64) DS1 card supporting N x 64 CAS Enumeration: 'taxi': 2, 'dS1-ATM': 6, 'dS1-CE': 5, 'hD-DS1': 45, 'dS3-FR': 30, 'chDS3STS1-3P': 55, 'quadSerial': 50, 'oC-3c': 3, 'rT-S': 42, 'dSP2B': 35, 'dSP2C': 47, 'msp-STM-1MM': 39, 'dSP2A': 31, 'sTM-1MMTS': 29, 'sTM-1MMAQ': 28, 'hD-E1': 44, 'oC12c-STM4-MM': 58, 'protectionCard': 17, 'oC-3cSMTS': 25, 'hD-E1-IMA': 54, 'aps-OC-3cSM': 36, 'sTM-1SMTS': 27, 'dSP1': 11, 'mD-DS1-IMA': 51, 'e1-CE': 7, 'chDS3STS1-3P-Prot': 62, 'e3-ATM': 8, 'stratum': 15, 'enhE1': 21, 'oC-3cMMAQ': 22, 'cPU': 14, 'cH-DS3': 40, 'pwrSupply': 16, 'tWOffice': 13, 'oC-3cMMTS': 23, 'oC-3cSMAQ': 24, 'dS3-IMA': 46, 'aps-OC-3cMM': 37, 'highSpeed': 9, 'e1-ATM': 18, 'hD-DS1-IMA': 53, 'sTM-1SMAQ': 26, 'e1-IMA': 33, 'mSerial': 10, 'none': 1, 'enhDS1': 20, 'tasm': 48, 'unstDS3E3-3P': 56, 'alarm': 34, 'oC12c-STM4-SM': 59, 'dS3E3-ATM-3P': 57, 'dS1-Nx64CAS': 64, 'ethernet-4P': 61, 'dS3-ATM': 4, 'cC-Server': 43, 'tWStation': 12, 'mD-DS1': 49, 'dS1-IMA': 32, 'msp-STM-1SM': 38, 'ethernet': 19, 'dSP2D': 60, 'cH-STS1': 41, 'alarm-fan': 63, 'mD-E1-IMA': 52.
                                 cardProtectionStatus 1.3.6.1.4.1.1751.2.18.2.1.1.3 integer read-only
Current protection status of the card: none if the card is un-protected; protected if it is under the protection of another card; wrongType if the card types of protection card and protected card are different. Enumeration: 'none': 1, 'protected': 2, 'wrongType': 3.
                                 cardOperStatus 1.3.6.1.4.1.1751.2.18.2.1.1.4 integer read-only
Current operational status of the card. For I/O card, it is primary if configured, it is unknown if unconfigured, or removed. For CPU, it is primary if the CPU is master CPU, or standby if the CPU is slave CPU. Enumeration: 'standby': 2, 'unknown': 3, 'primary': 1.
                                 cardAdminStatus 1.3.6.1.4.1.1751.2.18.2.1.1.5 integer read-write
administrative status Enumeration: 'switchProtection': 1.
                                 cardAlarmStatus 1.3.6.1.4.1.1751.2.18.2.1.1.6 integer read-only
last alarm occurred Enumeration: 'unknownAlarm': 11, 'compositeClockFailed': 6, 'lineFailed': 3, 'completeClockFailed': 12, 'inputPortClkFailed': 15, 'noAlarm': 1, 'backplaneCircuitryFailed': 13, 'overload': 7, 'powerFailed': 14, 'wrongCardType': 2, 'minus48vFailed': 10, 'cardRemoved': 4, 'referenceClockFailed': 5, 'plus120vFailed': 9, 'plus5vFailed': 8.
                                 cardCleiCode 1.3.6.1.4.1.1751.2.18.2.1.1.7 displaystring read-only
CLEI code
                                 cardRevision 1.3.6.1.4.1.1751.2.18.2.1.1.8 integer32 read-only
Card Revision number
                                 cardSerialNumber 1.3.6.1.4.1.1751.2.18.2.1.1.9 displaystring read-only
Serial Number
                                 cardOperatingMode 1.3.6.1.4.1.1751.2.18.2.1.1.10 integer read-write
Mode of operation for a card. This is applicable to those card types which can be configured in a dual mode. e.g. unstDS3E3-3P can be operational as either a 3 port DS3 or E3 card. All ports on the card will be of the same type depending on the card's operating mode. Enumeration: 'none': 1, 'oC12': 5, 'sTS1e': 4, 'dS3': 2, 'sTM4': 6, 'e3': 3.
                                 protectionConfigMode 1.3.6.1.4.1.1751.2.18.2.1.1.11 integer read-write
Protection Configuration Mode of a Card unprotected: Card is not in protection or protected state protection: Card is in protection state working: Card is in protected/working state and this state is read only and cannot be set by the user Enumeration: 'unprotected': 1, 'protection': 2, 'working': 3.
                                 protectionStatus 1.3.6.1.4.1.1751.2.18.2.1.1.12 integer read-only
Protection Status of a card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carrying active traffic or not. Enumeration: 'outOfService-Standby': 5, 'none': 1, 'inservice-Standby': 3, 'outOfService-Active': 4, 'inservice-Active': 2.
                                 protectionSlot 1.3.6.1.4.1.1751.2.18.2.1.1.13 integer read-only
If Protection Config Mode is Working then this field gives the protection slot.
                         taxiPortConfigTable 1.3.6.1.4.1.1751.2.18.2.2 no-access
Table of common physical Port attributes
                             taxiPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.2.1 no-access
Row definition for common physical port attributes
                                 taxiPortId 1.3.6.1.4.1.1751.2.18.2.2.1.1 integer32 no-access
interface index - SSPP
                                 taxiPortType 1.3.6.1.4.1.1751.2.18.2.2.1.2 integer read-write
taxi type Enumeration: 'taxi100': 1, 'taxi140': 2.
                                 taxiLineStatus 1.3.6.1.4.1.1751.2.18.2.2.1.3 integer read-only
taxi line status: 1: NoAlarm 2: Loss of Signal
                                 taxiOutputTransferRate 1.3.6.1.4.1.1751.2.18.2.2.1.4 integer read-write
User selectable parameter which allows the outgoing rate of the port to be reduced to 50% taxi, halfRate, only on AQueMan. Enumeration: 'halfRate': 2, 'fullRate': 1.
                         ds3PortConfigTable 1.3.6.1.4.1.1751.2.18.2.3 no-access
Table of ds3 specific port attributes
                             ds3PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.3.1 no-access
Row definition for ds3 specific port attributes
                                 ds3PortId 1.3.6.1.4.1.1751.2.18.2.3.1.1 integer32 no-access
slot/port: SSPP
                                 ds3LineType 1.3.6.1.4.1.1751.2.18.2.3.1.2 integer read-write
This variable indicates the variety of DS3 C-bit implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. The values, in sequence, describe: TITLE: SPECIFICATION: dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987. Enumeration: 'clearChannel': 2, 'cbitParity': 1, 'm13': 3, 'm23': 4.
                                 ds3LineCoding 1.3.6.1.4.1.1751.2.18.2.3.1.3 integer read-only
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. Enumeration: 'b3zs': 1.
                                 ds3LoopbackConfig 1.3.6.1.4.1.1751.2.18.2.3.1.4 integer read-write
This variable represents the loopback configuration of the DS3 interface. See above diagrams for explanations of loops. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2, 'payloadLoop': 4.
                                 ds3TransmitClockSource 1.3.6.1.4.1.1751.2.18.2.3.1.5 integer read-write
The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'cardFreeRun' indicates that a local oscillator on the I/O card is used as the transmit clock. 'adaptiveTiming' indicates that the adaptive clocking mechanism is used Enumeration: 'cardFreeRun': 3, 'loopTiming': 1, 'localTiming': 2, 'adaptiveTiming': 4.
                                 ds3LineStatus 1.3.6.1.4.1.1751.2.18.2.3.1.6 integer read-only
ds3 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback
                                 ds3LineBuildOut 1.3.6.1.4.1.1751.2.18.2.3.1.7 integer read-write
ds3 line build out Enumeration: 'short': 1, 'long': 2.
                                 ds3LineScramble 1.3.6.1.4.1.1751.2.18.2.3.1.8 integer read-write
ds3 line scramble Enumeration: 'disabled': 2, 'enabled': 1.
                                 ds3CellMapping 1.3.6.1.4.1.1751.2.18.2.3.1.9 integer read-write
ds3 cell mapping method Enumeration: 'plcp': 1, 'directMapping': 2.
                                 ds3SendCode 1.3.6.1.4.1.1751.2.18.2.3.1.10 integer read-write
This variable indicates what type of code is being sent across the ds3 interface by the device. The values mean: 'noCode' - sending looped or normal data 'lineLoopCode' - sending a request for a line loopback 'deactivateCode' - sending a loopback deactivation request 'testPattern' - sending a test pattern Enumeration: 'testPattern': 4, 'lineLoopCode': 2, 'noCode': 1, 'deactivateCode': 3.
                                 ds3OutputTxRate 1.3.6.1.4.1.1751.2.18.2.3.1.11 integer read-write
The ability to adjust the bandwidth of DS3 in tx direction. The adjustable DS3 bandwidth will support 1% increments.
                         msPortConfigTable 1.3.6.1.4.1.1751.2.18.2.4 no-access
Table of multi-serial card's port attributes
                             msPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.4.1 no-access
Row definition for multi-serial port attributes
                                 msPortId 1.3.6.1.4.1.1751.2.18.2.4.1.1 intfindex no-access
slot/port: SSPP
                                 msLineCoding 1.3.6.1.4.1.1751.2.18.2.4.1.2 integer read-only
Line Coding. Enumeration: 'nrz': 1.
                                 msBaudRate 1.3.6.1.4.1.1751.2.18.2.4.1.3 integer read-write
baud rate is determined by multiplying this number by the msBaudRateMultiplier Enumeration: 'baud3472k': 129, 'baud960k': 49, 'baud1216k': 57, 'baud9352k': 313, 'baud10024k': 333, 'baud4592k': 163, 'baud13504k': 442, 'baud8176k': 275, 'baud13376k': 438, 'baud1536k': 67, 'baud10048k': 334, 'baud6888k': 235, 'baud11072k': 366, 'baud2520k': 99, 'baud1008k': 50, 'baud5152k': 181, 'baud4536k': 161, 'baud3328k': 124, 'baud1064k': 52, 'baud7560k': 257, 'baud6104k': 211, 'baud13944k': 455, 'baud9856k': 328, 'baud11928k': 393, 'baud5936k': 205, 'baud13776k': 451, 'baud3360k': 125, 'baud168k': 24, 'baud11904k': 392, 'baud9240k': 309, 'baud12288k': 404, 'baud2112k': 86, 'baud448k': 33, 'baud1736k': 74, 'baud1400k': 62, 'baud900': 3, 'baud6592k': 226, 'baud7360k': 250, 'baud9296k': 311, 'baud1920k': 77, 'baud9536k': 318, 'baud5656k': 197, 'baud7200': 9, 'baud10640k': 353, 'baud8704k': 292, 'baud2816k': 108, 'baud4088k': 147, 'baud9520k': 317, 'baud1664k': 71, 'baud8512k': 286, 'baud896k': 47, 'baud12032k': 396, 'baud192k': 25, 'baud10976k': 363, 'baud3808k': 139, 'baud8832k': 296, 'baud150': 503, 'baud4352k': 156, 'baud5992k': 207, 'baud13104k': 429, 'baud8064k': 272, 'baud12712k': 417, 'baud10528k': 349, 'baud3192k': 119, 'baud10112k': 336, 'baud19200': 12, 'baud14912k': 477, 'baud4928k': 174, 'baud15872k': 492, 'baud4864k': 172, 'baud768k': 43, 'baud15040k': 479, 'baud12208k': 401, 'baud1176k': 56, 'baud14656k': 473, 'baud6048k': 209, 'baud1848k': 81, 'baud10080k': 335, 'baud7112k': 243, 'baud952k': 48, 'baud7104k': 242, 'baud10248k': 341, 'baud7840k': 265, 'baud14720k': 474, 'baud11264k': 372, 'baud1088k': 53, 'baud3968k': 144, 'baud16320k': 499, 'baud13216k': 433, 'baud12656k': 415, 'baud5120k': 180, 'baud3528k': 131, 'baud6464k': 222, 'baud13696k': 448, 'baud9024k': 302, 'baud4544k': 162, 'baud10752k': 356, 'baud10880k': 360, 'baud13048k': 427, 'baud64k': 21, 'baud13760k': 450, 'baud3072k': 116, 'baud9664k': 322, 'baud12480k': 410, 'baud6272k': 216, 'baud3920k': 143, 'baud13056k': 428, 'baud10584k': 351, 'baud5376k': 188, 'baud9280k': 310, 'baud12928k': 424, 'baud2752k': 106, 'baud4736k': 168, 'baud3200k': 120, 'baud12376k': 407, 'baud7056k': 241, 'baud6784k': 232, 'baud6328k': 217, 'baud6336k': 218, 'baud5600k': 195, 'baud2400': 6, 'baud3648k': 134, 'baud11424k': 377, 'baud15360k': 484, 'baud6664k': 229, 'baud12800k': 420, 'baud9088k': 304, 'baud2296k': 91, 'baud5184k': 182, 'baud8640k': 290, 'baud5264k': 185, 'baud11312k': 373, 'baud9688k': 323, 'baud6720k': 230, 'baud230400': 502, 'baud5208k': 183, 'baud10368k': 344, 'baud15104k': 480, 'baud14272k': 466, 'baud2464k': 97, 'baud10472k': 347, 'baud11536k': 381, 'baud1120k': 54, 'baud9600': 10, 'baud5760k': 200, 'baud1680k': 72, 'baud6912k': 236, 'baud15232k': 482, 'baud7224k': 245, 'baud336k': 30, 'baud6552k': 225, 'baud2176k': 88, 'baud2560k': 100, 'baud3392k': 126, 'baud128k': 23, 'baud13608k': 445, 'baud10560k': 350, 'baud13632k': 446, 'baud12096k': 398, 'baud13248k': 434, 'baud15424k': 485, 'baud13272k': 435, 'baud12040k': 397, 'baud2128k': 87, 'baud7504k': 255, 'baud13312k': 436, 'baud6216k': 215, 'baud15296k': 483, 'baud9912k': 329, 'baud11968k': 394, 'baud8232k': 277, 'baud3416k': 127, 'baud57600': 15, 'baud14144k': 462, 'baud3776k': 138, 'baud6384k': 219, 'baud1904k': 82, 'baud15808k': 491, 'baud512k': 35, 'baud7040k': 240, 'baud832k': 45, 'baud8320k': 280, 'baud8792k': 295, 'baud7744k': 262, 'baud672k': 40, 'baud8768k': 294, 'baud2352k': 93, 'baud2240k': 90, 'baud11328k': 374, 'baud14000k': 457, 'baud11456k': 378, 'baud10496k': 348, 'baud7280k': 247, 'baud8008k': 271, 'baud9152k': 306, 'baud7296k': 248, 'baud4312k': 155, 'baud3008k': 114, 'baud1856k': 76, 'baud16128k': 496, 'baud616k': 38, 'baud9128k': 305, 'baud784k': 44, 'baud1800': 5, 'baud256k': 27, 'baud9072k': 303, 'baud4800': 8, 'baud56k': 20, 'baud2304k': 92, 'baud32k': 19, 'baud3024k': 115, 'baud8680k': 291, 'baud14976k': 478, 'baud11088k': 367, 'baud3520k': 130, 'baud13720k': 449, 'baud11520k': 380, 'baud9472k': 316, 'baud8256k': 278, 'baud8576k': 288, 'baud3456k': 128, 'baud10920k': 361, 'baud13552k': 443, 'baud9632k': 321, 'baud5824k': 202, 'baud11592k': 383, 'baud13832k': 453, 'baud7168k': 244, 'baud320k': 29, 'baud6440k': 221, 'baud8624k': 289, 'baud2624k': 102, 'baud16384k': 500, 'baud11144k': 369, 'baud6144k': 212, 'baud7896k': 267, 'baud115200': 17, 'baud3696k': 135, 'baud7728k': 261, 'baud4032k': 146, 'baud11648k': 384, 'baud8192k': 276, 'baud12152k': 399, 'baud3864k': 141, 'baud2944k': 112, 'baud11872k': 391, 'baud3640k': 133, 'baud13328k': 437, 'baud10136k': 337, 'baud1456k': 64, 'baud7424k': 252, 'baud2912k': 111, 'baud600': 2, 'baud12936k': 425, 'baud8848k': 297, 'baud14592k': 472, 'baud7448k': 253, 'baud5880k': 203, 'baud2880k': 110, 'baud10192k': 339, 'baud10944k': 362, 'baud11008k': 364, 'baud9728k': 324, 'baud8456k': 285, 'baud384k': 31, 'baud10360k': 343, 'baud392k': 32, 'baud7672k': 260, 'baud4224k': 152, 'baud4992k': 176, 'baud28800': 13, 'baud5248k': 184, 'baud15616k': 488, 'baud15936k': 493, 'baud16000k': 494, 'baud6832k': 233, 'baud14336k': 468, 'baud11840k': 390, 'baud1544k': 501, 'baud1200': 4, 'baud14848k': 476, 'baud5096k': 179, 'baud3304k': 123, 'baud4096k': 148, 'baud9344k': 312, 'baud9464k': 315, 'baud13664k': 447, 'baud8128k': 274, 'baud1568k': 68, 'baud10432k': 346, 'baud8288k': 279, 'baud12352k': 406, 'baud4424k': 159, 'baud5768k': 201, 'baud12600k': 413, 'baud13952k': 456, 'baud2632k': 103, 'baud13160k': 431, 'baud9984k': 332, 'baud10816k': 358, 'baud1024k': 51, 'baud5312k': 186, 'baud11984k': 395, 'baud112k': 22, 'baud14168k': 463, 'baud14400k': 469, 'baud5568k': 194, 'baud9216k': 308, 'baud3840k': 140, 'baud12824k': 421, 'baud8000k': 270, 'baud9016k': 301, 'baud12320k': 405, 'baud4760k': 169, 'baud4800k': 170, 'baud14784k': 475, 'baud11256k': 371, 'baud7936k': 268, 'baud13440k': 440, 'baud1624k': 70, 'baud13824k': 452, 'baud15744k': 490, 'baud3080k': 117, 'baud13184k': 432, 'baud5056k': 178, 'baud11368k': 375, 'baud4256k': 153, 'baud38400': 14, 'baud7872k': 266, 'baud5440k': 190, 'baud7808k': 264, 'baud576k': 37, 'baud3600': 7, 'baud75': 80, 'baud10864k': 359, 'baud1280k': 59, 'baud3584k': 132, 'baud10416k': 345, 'baud6776k': 231, 'baud9576k': 319, 'baud1512k': 66, 'baud2856k': 109, 'baud1232k': 58, 'baud12992k': 426, 'baud1152k': 55, 'baud6976k': 238, 'baud12416k': 408, 'baud14464k': 470, 'baud14528k': 471, 'baud7000k': 239, 'baud3712k': 136, 'baud3904k': 142, 'baud2688k': 104, 'baud2048k': 79, 'baud9968k': 331, 'baud4416k': 158, 'baud2072k': 85, 'baud12224k': 402, 'baud9184k': 307, 'baud7680k': 259, 'baud13568k': 444, 'baud5888k': 204, 'baud8400k': 283, 'baud1408k': 63, 'baud12160k': 400, 'baud4288k': 154, 'baud10696k': 355, 'baud8448k': 284, 'baud4160k': 150, 'baud8344k': 281, 'baud2744k': 105, 'baud5432k': 189, 'baud504k': 34, 'baud14208k': 464, 'baud6608k': 227, 'baud11712k': 386, 'baud12544k': 412, 'baud76800': 16, 'baud14056k': 459, 'baud6656k': 228, 'baud1984k': 78, 'baud5488k': 191, 'baud14400': 11, 'baud14080k': 460, 'baud5504k': 192, 'baud7952k': 269, 'baud4480k': 160, 'baud11032k': 365, 'baud12768k': 419, 'baud11136k': 368, 'baud2496k': 98, 'baud13384k': 439, 'baud15168k': 481, 'baud7552k': 256, 'baud6848k': 234, 'baud16k': 18, 'baud6160k': 213, 'baud9920k': 330, 'baud5712k': 199, 'baud6528k': 224, 'baud12672k': 416, 'baud5696k': 198, 'baud6944k': 237, 'baud12608k': 414, 'baud6496k': 223, 'baud4984k': 175, 'baud9800k': 327, 'baud8384k': 282, 'baud7488k': 254, 'baud3976k': 145, 'baud5320k': 187, 'baud12736k': 418, 'baud12432k': 409, 'baud12488k': 411, 'baud10624k': 352, 'baud11760k': 387, 'baud11392k': 376, 'baud5544k': 193, 'baud7336k': 249, 'baud11776k': 388, 'baud13120k': 430, 'baud11200k': 370, 'baud9408k': 314, 'baud1792k': 75, 'baud7616k': 258, 'baud13888k': 454, 'baud11584k': 382, 'baud15680k': 489, 'baud1472k': 65, 'baud4704k': 167, 'baud7784k': 263, 'baud4816k': 171, 'baud2408k': 95, 'baud12264k': 403, 'baud4368k': 157, 'baud704k': 41, 'baud2432k': 96, 'baud1960k': 83, 'baud300': 1, 'baud5632k': 196, 'baud12880k': 423, 'baud1600k': 69, 'baud11704k': 385, 'baud2368k': 94, 'baud3248k': 121, 'baud8120k': 273, 'baud728k': 42, 'baud8896k': 298, 'baud840k': 46, 'baud5040k': 177, 'baud15552k': 487, 'baud14224k': 465, 'baud2576k': 101, 'baud9744k': 325, 'baud2016k': 84, 'baud640k': 39, 'baud8904k': 299, 'baud2184k': 89, 'baud10808k': 357, 'baud10240k': 340, 'baud14280k': 467, 'baud14112k': 461, 'baud9600k': 320, 'baud5952k': 206, 'baud1728k': 73, 'baud4648k': 165, 'baud3752k': 137, 'baud4672k': 166, 'baud10688k': 354, 'baud280k': 28, 'baud8736k': 293, 'baud14016k': 458, 'baud3264k': 122, 'baud6400k': 220, 'baud2968k': 113, 'baud2800k': 107, 'baud6208k': 214, 'baud16064k': 495, 'baud224k': 26, 'baud16192k': 497, 'baud11480k': 379, 'baud16256k': 498, 'baud4608k': 164, 'baud9792k': 326, 'baud1344k': 61, 'baud4144k': 149, 'baud3136k': 118, 'baud12864k': 422, 'baud6016k': 208, 'baud15488k': 486, 'baud7392k': 251, 'baud8960k': 300, 'baud10176k': 338, 'baud560k': 36, 'baud4872k': 173, 'baud6080k': 210, 'baud13496k': 441, 'baud11816k': 389, 'baud1288k': 60, 'baud7232k': 246, 'baud10304k': 342, 'baud4200k': 151, 'baud8568k': 287.
                                 msProtocol 1.3.6.1.4.1.1751.2.18.2.4.1.4 integer read-write
protocol type for serial port Enumeration: 'rs530': 3, 'kg': 6, 'v35': 4, 'rs530A': 7, 'rs449': 2, 'rs232': 1, 'x21': 5.
                                 msEquipmentType 1.3.6.1.4.1.1751.2.18.2.4.1.5 integer read-write
Equipment type Enumeration: 'dce': 2, 'dte': 1.
                                 msRs232XmitMode 1.3.6.1.4.1.1751.2.18.2.4.1.6 integer read-write
transmit mode for rs232 DTE/DCE serial port Enumeration: 'asynchronous': 2, 'synchronous': 1.
                                 msRs232Parity 1.3.6.1.4.1.1751.2.18.2.4.1.7 integer read-write
parity for rs232 DTE/DCE serial port Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                                 msRs232DataBits 1.3.6.1.4.1.1751.2.18.2.4.1.8 integer read-write
data bits for rs232 DTE/DCE serial port Enumeration: 'seven': 2, 'six': 3, 'eight': 1.
                                 msRs232StopBits 1.3.6.1.4.1.1751.2.18.2.4.1.9 integer read-write
stop bits for rs232 DTE/DCE serial port Enumeration: 'two': 2, 'one': 1.
                                 msTxDataClkSrcForDte 1.3.6.1.4.1.1751.2.18.2.4.1.10 integer read-write
Transmit data clock source for DTE, externalTx in is not valid for rs232. This field is ignored if the local side is DCE. Enumeration: 'txRxTiming': 2, 'localTiming': 1, 'txTiming': 3.
                                 msTxDataClkSrcForDce 1.3.6.1.4.1.1751.2.18.2.4.1.11 integer read-write
Transmit data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if the local side is DTE Enumeration: 'loopTiming': 2, 'localTiming': 1.
                                 msRxDataClkSrcForDce 1.3.6.1.4.1.1751.2.18.2.4.1.12 integer read-write
Receive data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if the local side is DTE Enumeration: 'localTiming': 1, 'externalTiming': 2.
                                 msRxClkPolarity 1.3.6.1.4.1.1751.2.18.2.4.1.13 integer read-write
Whether or not to reverse the receive clock Enumeration: 'inverted': 2, 'standard': 1.
                                 msTxClkPolarity 1.3.6.1.4.1.1751.2.18.2.4.1.14 integer read-write
Whether or not to reverse the transmit clock Enumeration: 'inverted': 2, 'standard': 1.
                                 msKgResync 1.3.6.1.4.1.1751.2.18.2.4.1.15 integer read-write
Turn KG resync on/off Enumeration: 'disabled': 2, 'enabled': 1.
                                 msHandshake 1.3.6.1.4.1.1751.2.18.2.4.1.16 integer read-write
Multiserial Module handshake: observed : used with AAL1 to monitor RTS/CTS exchange. Enumeration: 'observed': 1, 'ignored': 2.
                                 msSpeedAdaption 1.3.6.1.4.1.1751.2.18.2.4.1.17 integer read-write
The state of allowing speed adaption Enumeration: 'disabled': 2, 'enabled': 1.
                                 msBitStuffing 1.3.6.1.4.1.1751.2.18.2.4.1.18 integer read-write
When msBitStuffing is enabled, CAC throughput is (1 + 1/7) user throughtput. Otherwise the CAC throughput is the same as the user throughput. msBitStuffing can only be enabled for circuit emulation interfaces. Enumeration: 'disabled': 1, 'enabled': 2.
                                 msLineStatus 1.3.6.1.4.1.1751.2.18.2.4.1.19 integer read-only
line status on the port: The msLineStatus is a bit map representation. It can represent multiple failures (alarms) if supported by the card. NoAlarm should be set if and only if no other flag is set. The various bit positions are: 1: NoAlarm 2: Loss of Signal
                                 msRxDataPolarity 1.3.6.1.4.1.1751.2.18.2.4.1.20 integer read-write
Whether or not to reverse the receive data Enumeration: 'inverted': 2, 'standard': 1.
                                 msTxDataPolarity 1.3.6.1.4.1.1751.2.18.2.4.1.21 integer read-write
Whether or not to reverse the transmit data Enumeration: 'inverted': 2, 'standard': 1.
                                 msLoopbackConfig 1.3.6.1.4.1.1751.2.18.2.4.1.22 integer read-write
This variable represents the loopback configuration of the Serial port. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2.
                                 msLOSDetection 1.3.6.1.4.1.1751.2.18.2.4.1.23 integer read-write
State of detection of LOS by IO card. LOS detection is always enabled when msBitStuffing is enabled. When the interface is not circuit emulation, the IO card does not report any LOS. Enumeration: 'disabled': 1, 'enabled': 2.
                         ds1PortConfigTable 1.3.6.1.4.1.1751.2.18.2.5 no-access
Table of ds1 specific port attributes
                             ds1PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.5.1 no-access
Row definition for ds1 specific port attributes
                                 ds1PortId 1.3.6.1.4.1.1751.2.18.2.5.1.1 integer32 no-access
interface index - slot/port: SSPP
                                 ds1Channelization 1.3.6.1.4.1.1751.2.18.2.5.1.2 integer read-write
ds1 interface type Enumeration: 'disabled': 1, 'enabled': 2.
                                 ds1LineType 1.3.6.1.4.1.1751.2.18.2.5.1.3 integer read-write
ds1 interface type Enumeration: 'esf': 1, 'd4': 2.
                                 ds1LineCoding 1.3.6.1.4.1.1751.2.18.2.5.1.4 integer read-write
ds1 interface type Enumeration: 'ami': 2, 'b8zs': 1.
                                 ds1LoopbackConfig 1.3.6.1.4.1.1751.2.18.2.5.1.5 integer read-write
This variable represents the loopback configuration of the ds1 interface Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2, 'payloadLoop': 4.
                                 ds1TransmitClockSource 1.3.6.1.4.1.1751.2.18.2.5.1.6 integer read-write
ds1 timing source Enumeration: 'loopTiming': 1, 'localTiming': 2, 'adaptive': 3.
                                 ds1LineBuildOut 1.3.6.1.4.1.1751.2.18.2.5.1.7 integer read-write
ds1 line build out Enumeration: 'upTo655Feet': 5, 'negative7-5Db': 6, 'upTo533Feet': 4, 'upTo266Feet': 2, 'upTo399Feet': 3, 'upTo133Feet': 1, 'negative15Db': 7, 'negative22-5Db': 8.
                                 ds1LineStatus 1.3.6.1.4.1.1751.2.18.2.5.1.8 integer read-only
This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. ds1NoAlarm should be set if and only if no other flag is set. If the ds1LoopbackState bit is set, the loopbak in effect can be determined from the ds1LoopbackConfig object. The various bit positions are: 1: dsx1NoAlarm: No Alarm Present 2: dsx1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: dsx1XmtFarEndLOF: Near end sending LOF Indication 8: dsx1RcvAIS: Far end sending AIS 16: dsx1XmtAIS: Near end sending AIS 32: dsx1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: dsx1LossOfSignal: Near end Loss Of Signal 128: dsx1LoopbackState: Near end is looped 256: dsx1T16AIS: E1 TS16 AIS 512: dsx1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: dsx1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: dsx1RcvTestCode: Near End detects a test code 4096: dsx1OtherFailure: any line status not defined here 8192: dsx1RmtLoopback: Far end loopback
                                 ds1EnhanceFeatureSet1 1.3.6.1.4.1.1751.2.18.2.5.1.10 integer read-write
To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under this scheme. Enumeration: 'disabled': 1, 'enabled': 2.
                                 ds1DataTransferType 1.3.6.1.4.1.1751.2.18.2.5.1.11 integer read-write
DS1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer, whereas, the structured CE packets the entire T1 frame except the F-bit. Enumeration: 'unstructured': 2, 'structured': 1.
                                 ds1OamInterworkingType 1.3.6.1.4.1.1751.2.18.2.5.1.12 integer read-write
Specifies whether the interworking is done by trunk conditioning or unframed1s Enumeration: 'unframed1s': 2, 'trunkCond': 1.
                                 ds1ConnGatewayFeature 1.3.6.1.4.1.1751.2.18.2.5.1.14 integer read-write
To enable/disable connection gateway (Sapphire) API. Enumeration: 'disabled': 1, 'enabled': 2.
                                 ds1InLineCode 1.3.6.1.4.1.1751.2.18.2.5.1.15 integer read-write
To select and support the inlinecode option in either ANSI or DS1_ANI (ANI: Access Network Interface) Enumeration: 'aNSI': 1, 'ds1-ANI': 2.
                         oc3PortConfigTable 1.3.6.1.4.1.1751.2.18.2.6 no-access
Table of common physical Port attributes
                             oc3PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.6.1 no-access
Row definition for common physical port attributes
                                 oc3PortId 1.3.6.1.4.1.1751.2.18.2.6.1.1 integer32 no-access
interface index - SSPP
                                 oc3LoopbackConfig 1.3.6.1.4.1.1751.2.18.2.6.1.2 integer read-write
This variable represents the loopback configuration of the OC3 interface See above diagrams for explanations of loops. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2.
                                 oc3TransmitClockSource 1.3.6.1.4.1.1751.2.18.2.6.1.3 integer read-write
The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. Enumeration: 'loopTiming': 1, 'localTiming': 2.
                                 oc3LineStatus 1.3.6.1.4.1.1751.2.18.2.6.1.4 integer read-only
oc3 line status - 1: oc3NoAlarm: No alarm present 2: oc3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: oc3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: oc3RcvAIS: Receiving AIS failure state 16: oc3XmitAIS: Transmitting AIS failure statue 32: oc3LOF: Receiving LOF failure state 64: oc3LOS: Reveiving LOS failure state 128: oc3LoopbackState: Looping the received signal 256: oc3RcvTestCode: Receiving a Test Pattern 512: oc3OtherFailure: any line status not defined 1024: oc3LCD: Receiving Loss Of Cell Delineation 2048: oc3LRDI: Receiving Line RDI failure state 4096: oc3PRDI: Receiving Path RDI failure state
                                 oc3OutputTransferRate 1.3.6.1.4.1.1751.2.18.2.6.1.5 integer read-write
User selectable parameter which allows the outgoing rate of the port to be reduced to 50% oc3, halfRate, only on AQueMan. Enumeration: 'halfRate': 2, 'fullRate': 1.
                                 oc3APSConfiguration 1.3.6.1.4.1.1751.2.18.2.6.1.6 integer read-write
Indicates whether APS is configured for this port . Enumeration: 'unprotected': 1, 'protection': 3, 'working': 2.
                         twoWireSourcePortConfigTable 1.3.6.1.4.1.1751.2.18.2.7 no-access
Table of common physical Port attributes
                             twoWireSourcePortConfigEntry 1.3.6.1.4.1.1751.2.18.2.7.1 no-access
Row definition for common physical port attributes
                                 twoWireSourcePortId 1.3.6.1.4.1.1751.2.18.2.7.1.1 integer32 no-access
interface index - SSPP
                                 twoWireSourceLoopDetection 1.3.6.1.4.1.1751.2.18.2.7.1.2 integer read-only
This field selects terminal equipment loop circuit detection mode. Enumeration: 'groundStart': 2, 'loopStart': 1.
                                 twoWireSourceDialMode 1.3.6.1.4.1.1751.2.18.2.7.1.3 integer read-only
This field configures twoWireSource card to support communication terminal equipment. Enumeration: 'dialPulse': 2, 'dtmf': 1.
                                 twoWireSourceLoopBackConfig 1.3.6.1.4.1.1751.2.18.2.7.1.4 integer read-only
Configuration of 2W Source LoopBack. Enumeration: 'facilityLoopback': 2, 'noLoopback': 1.
                                 twoWireSourceLineStatus 1.3.6.1.4.1.1751.2.18.2.7.1.5 integer read-only
twoWireSource line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure
                                 twoWireSourceSignalingBits 1.3.6.1.4.1.1751.2.18.2.7.1.6 integer read-only
This field selects the signaling bits as seen in DS1 signal, ab or abcd. Enumeration: 'abcd': 2, 'ab': 1.
                                 twoWireSourceRingCadence 1.3.6.1.4.1.1751.2.18.2.7.1.7 integer read-only
This field selects ring On/Off pattern. Enumeration: 'oneOnThreeOff': 1.
                                 twoWireSourceSignalingState 1.3.6.1.4.1.1751.2.18.2.7.1.8 integer read-only
This field reflects the current signaling state. Enumeration: 'ringBack': 3, 'onHook': 5, 'dtmf': 2, 'idle': 1, 'connect': 4, 'nearEndDisconnect': 7, 'farEndDisconnect': 8, 'ringTrip': 6.
                                 twoWireSourceTestMode 1.3.6.1.4.1.1751.2.18.2.7.1.9 integer read-write
This field selects line test mode. For normal operation, this field should be OFF. Enumeration: 'quietTime': 2, 'off': 1, 'f-1004Hz': 3.
                         highSpeedPortConfigTable 1.3.6.1.4.1.1751.2.18.2.8 no-access
Table of common physical Port attributes
                             highSpeedPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.8.1 no-access
Row definition for common physical port attributes
                                 highSpeedPortId 1.3.6.1.4.1.1751.2.18.2.8.1.1 integer32 no-access
interface index - SSPP
                                 highSpeedPortInputRate 1.3.6.1.4.1.1751.2.18.2.8.1.2 integer32 read-write
Port input rate
                                 highSpeedPortOutputRate 1.3.6.1.4.1.1751.2.18.2.8.1.3 integer32 read-write
Port output rate
                         dspPortConfigTable 1.3.6.1.4.1.1751.2.18.2.9 no-access
Table of common physical Port attributes
                             dspPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.9.1 no-access
Row definition for common physical port attributes
                                 dspPortId 1.3.6.1.4.1.1751.2.18.2.9.1.1 integer32 read-only
interface index - SSPP
                         twoWireSinkPortConfigTable 1.3.6.1.4.1.1751.2.18.2.10 no-access
Table of common physical Port attributes
                               twoWireSinkPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.10.1 no-access
Row definition for common physical port attributes
                                   twoWireSinkPortId 1.3.6.1.4.1.1751.2.18.2.10.1.1 integer32 no-access
interface index - SSPP
                                   twoWireSinkLoopDetection 1.3.6.1.4.1.1751.2.18.2.10.1.2 integer read-only
Types of loop detection. Enumeration: 'groundStart': 2, 'loopStart': 1.
                                   twoWireSinkDialMode 1.3.6.1.4.1.1751.2.18.2.10.1.3 integer read-only
This field selects subscribed dial mode. Enumeration: 'dialPulse': 2, 'dtmf': 1.
                                   twoWireSinkLineStatus 1.3.6.1.4.1.1751.2.18.2.10.1.4 integer read-only
twoWireSink line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure
                                   twoWireSinkSignalingBits 1.3.6.1.4.1.1751.2.18.2.10.1.5 integer read-only
This field selects the signaling bits as seen in DS1 signal, ab or abcd. Enumeration: 'abcd': 2, 'ab': 1.
                                   twoWireSinkSignalingState 1.3.6.1.4.1.1751.2.18.2.10.1.6 integer read-only
This field reflects the current signaling state. Enumeration: 'onHook': 3, 'idle': 1, 'connect': 2, 'nearEndDisconnect': 5, 'farEndDisconnect': 6, 'ringTrip': 4.
                                   twoWireSinkTestMode 1.3.6.1.4.1.1751.2.18.2.10.1.7 integer read-write
This field selects line test mode. For normal operation, this field should be OFF. Enumeration: 'quietTime': 2, 'off': 1, 'f-1004Hz': 3.
                         e3PortConfigTable 1.3.6.1.4.1.1751.2.18.2.11 no-access
Table of e3 specific port attributes
                               e3PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.11.1 no-access
Row definition for e3 specific port attributes
                                   e3PortId 1.3.6.1.4.1.1751.2.18.2.11.1.1 integer32 no-access
slot/port: SSPP
                                   e3LineType 1.3.6.1.4.1.1751.2.18.2.11.1.2 integer read-write
This variable indicates the basic frame structure supported in this E3 port. The rate of E3 is 34.368 Mbps. TITLE: SPECIFICATION: G.832 ITU-T G.832 1993. G.751 ITU-T G.751 1998 Enumeration: 'g832': 1, 'g751': 2.
                                   e3LineCoding 1.3.6.1.4.1.1751.2.18.2.11.1.3 integer read-only
The line code supported for the E3 port. The High Density Bipolar of order 3 (hdb3) as specified in section 8.1 of ITU-T G.703. Enumeration: 'hdb3': 1.
                                   e3LoopbackConfig 1.3.6.1.4.1.1751.2.18.2.11.1.4 integer read-write
This variable represents the loopback configuration of the E3 interface. See above diagrams for explanations of loops. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2, 'payloadLoop': 4.
                                   e3TransmitClockSource 1.3.6.1.4.1.1751.2.18.2.11.1.5 integer read-write
The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'adaptiveTiming' indicates that the adaptive clocking mechanism is used. Enumeration: 'loopTiming': 1, 'localTiming': 2, 'adaptiveTiming': 3.
                                   e3LineStatus 1.3.6.1.4.1.1751.2.18.2.11.1.6 integer read-only
e3 line status: 1: e3NoAlarm: No alarm present 2: e3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: e3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: e3RcvAIS: Receiving AIS failure state 16: e3XmitAIS: Transmitting AIS failure statue 32: e3LOF: Receiving LOF failure state 64: e3LOS: Reveiving LOS failure state 128: e3LoopbackState: Looping the received signal 256: e3RcvTestCode: Receiving a Test Pattern 512: e3OtherFailure: any line status not defined
                                   e3LineBuildOut 1.3.6.1.4.1.1751.2.18.2.11.1.7 integer read-only
e3 line build out Enumeration: 'short': 1, 'long': 2.
                                   e3LineScramble 1.3.6.1.4.1.1751.2.18.2.11.1.8 integer read-write
e3 line scramble Enumeration: 'disabled': 2, 'enabled': 1.
                                   e3CellMapping 1.3.6.1.4.1.1751.2.18.2.11.1.9 integer read-write
e3 cell mapping method Enumeration: 'plcp': 2, 'directMapping': 1.
                         e1PortConfigTable 1.3.6.1.4.1.1751.2.18.2.12 no-access
Table of e1 specific port attributes
                               e1PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.12.1 no-access
Row definition for e1 specific port attributes
                                   e1PortId 1.3.6.1.4.1.1751.2.18.2.12.1.1 integer32 no-access
interface index - slot/port: SSPP
                                   e1Channelization 1.3.6.1.4.1.1751.2.18.2.12.1.2 integer read-write
e1 interface type Enumeration: 'disabled': 1, 'enabled': 2.
                                   e1LineType 1.3.6.1.4.1.1751.2.18.2.12.1.3 integer read-only
E1 interface type. The rate of E1 is 2.048 Mbps Enumeration: 'crc-mf': 1.
                                   e1LineCoding 1.3.6.1.4.1.1751.2.18.2.12.1.4 integer read-only
e1 interface type Enumeration: 'hdb3': 1.
                                   e1LoopbackConfig 1.3.6.1.4.1.1751.2.18.2.12.1.5 integer read-write
This variable represents the loopback configuration of the e1 interface See above diagrams for explanations of loops. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2.
                                   e1TransmitClockSource 1.3.6.1.4.1.1751.2.18.2.12.1.6 integer read-write
e1 timing source Enumeration: 'loopTiming': 1, 'localTiming': 2, 'adaptive': 3.
                                   e1LineNationalBits 1.3.6.1.4.1.1751.2.18.2.12.1.7 integer read-write
e1 line country specific code Enumeration: 'b10010': 19, 'b10011': 20, 'b10111': 24, 'b10110': 23, 'b11101': 30, 'b11100': 29, 'b01010': 11, 'b01011': 12, 'b11000': 25, 'b11001': 26, 'b01111': 16, 'b01110': 15, 'b00000': 1, 'b00001': 2, 'b00101': 6, 'b00100': 5, 'b10001': 18, 'b10000': 17, 'b11110': 31, 'b11111': 32, 'b01001': 10, 'b01000': 9, 'b10100': 21, 'b10101': 22, 'b11011': 28, 'b11010': 27, 'b01100': 13, 'b01101': 14, 'b00110': 7, 'b00111': 8, 'b00011': 4, 'b00010': 3.
                                   e1LineStatus 1.3.6.1.4.1.1751.2.18.2.12.1.8 integer read-only
This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The e1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. e1NoAlarm should be set if and only if no other flag is set. If the e1LoopbackState bit is set, the loopback in effect can be determined from the e1LoopbackConfig object. The various bit positions are: 1: e1NoAlarm: No Alarm Present 2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: e1XmtFarEndLOF: Near end sending LOF Indication 8: e1RcvAIS: Far end sending AIS 16: e1XmtAIS: Near end sending AIS 32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: e1LossOfSignal: Near end Loss Of Signal 128: e1LoopbackState: Near end is looped 256: e1T16AIS: E1 TS16 AIS 512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: e1RcvTestCode: Near End detects a test code 4096: e1OtherFailure: any line status not defined here
                                   e1TS16 1.3.6.1.4.1.1751.2.18.2.12.1.10 integer read-write
Time slot 16 is configurable for channel associated signaling (CAS) or data. cas: 'ABCD' signaling will be extracted in time slot 16 if channel is configured for circuit emulation. ccs: time slot 16 will not carry any e1 channel signaling information, instead, it will be used for data. Enumeration: 'cas': 1, 'ccs': 2.
                                   e1DataTransferType 1.3.6.1.4.1.1751.2.18.2.12.1.11 integer read-write
E1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer, whereas, the structured CE packets the entire E1 frame except the Frame alignment signal channel. Enumeration: 'unstructured': 2, 'structured': 1.
                                   e1CRC4 1.3.6.1.4.1.1751.2.18.2.12.1.12 integer read-write
Enable or disable transmission of CRC4 bits on bit 1 of each frame. Enumeration: 'disabled': 2, 'enabled': 1.
                                   e1OamInterworkingType 1.3.6.1.4.1.1751.2.18.2.12.1.13 integer read-write
Specifies whether the interworking is done by trunk conditioning or unframed1s Enumeration: 'unframed1s': 2, 'trunkCond': 1.
                                   e1EnhanceFeatureSet1 1.3.6.1.4.1.1751.2.18.2.12.1.14 integer read-write
To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under the scheme. Enumeration: 'disabled': 1, 'enabled': 2.
                                   e1ConnGatewayFeature 1.3.6.1.4.1.1751.2.18.2.12.1.15 integer read-write
To enable/disable connection gateway (Sapphire) API. Enumeration: 'disabled': 1, 'enabled': 2.
                         ethernetPortConfigTable 1.3.6.1.4.1.1751.2.18.2.13 no-access
Table of common physical Port attributes
                               ethernetPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.13.1 no-access
Row definition for common physical port attributes
                                   ethernetPortId 1.3.6.1.4.1.1751.2.18.2.13.1.1 integer32 no-access
interface index - SSPP
                                   ethernetLinkType 1.3.6.1.4.1.1751.2.18.2.13.1.2 integer read-write
The type of port can either be set to 10baseT or 100baseT for the first port on the ethernet card. The other ports can only be set to 10baseT. The Auto mode will detect what LAN speed the port is connected to. Enumeration: 'auto': 3, 'l-10BaseT': 1, 'l-100BaseT': 2.
                                   ethernetPhysicalAddr 1.3.6.1.4.1.1751.2.18.2.13.1.3 octet string read-write
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dSprPriority a unique Bridgeidentifier is formed which is used in the Spanning Tree Protocol.
                                   ethernetLineStatus 1.3.6.1.4.1.1751.2.18.2.13.1.4 integer read-only
ethernet line status: 1: Down 2: 10baseT-FullDuplex 4: 10baseT-HalfDuplex 8: 100baseT-FullDuplex 16: 100baseT-HalfDuplex
                                   ethernetDuplexMode 1.3.6.1.4.1.1751.2.18.2.13.1.5 integer read-write
Set the port to either be in full or half duplex. You can also set the port to auto detect the mode it is connected to. Enumeration: 'auto': 3, 'full': 1, 'half': 2.
                         dsp2PortConfigTable 1.3.6.1.4.1.1751.2.18.2.14 no-access
Table of common physical Port attributes
                               dsp2PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.14.1 no-access
Row definition for common physical port attributes
                                   dsp2PortId 1.3.6.1.4.1.1751.2.18.2.14.1.1 integer32 read-only
interface index - SSPP
                         imaPortConfigTable 1.3.6.1.4.1.1751.2.18.2.15 no-access
Table used for the IMA virtual port on cards that have physical interfaces configured as atmIma. Corresponds to port 7 on DS1 and E1.
                               imaPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.15.1 no-access
Row definition for ima specific port attributes
                                   imaPortId 1.3.6.1.4.1.1751.2.18.2.15.1.1 integer32 read-only
interface index - slot/port: SSPP
                         oc3APS 1.3.6.1.4.1.1751.2.18.2.16
                               oc3APSPairConfigTable 1.3.6.1.4.1.1751.2.18.2.16.1 no-access
Table of common physical Port attributes
                                   oc3APSPairConfigEntry 1.3.6.1.4.1.1751.2.18.2.16.1.1 no-access
Row definition for common physical port attributes
                                       oc3APSPairId 1.3.6.1.4.1.1751.2.18.2.16.1.1.1 integer32 no-access
APS Pair Port index - SSPP
                                       oc3APSPairMode 1.3.6.1.4.1.1751.2.18.2.16.1.1.2 integer read-write
Unidirectional or Bidirectional mode: Uni - Each pair operates independently i.e. a switch over in one pair does not effect the remote pair. Bi - both remote and local pairs have to switch together. Enumeration: 'bidirectional': 2, 'unidirectional': 1.
                                       oc3APSPairOption 1.3.6.1.4.1.1751.2.18.2.16.1.1.3 integer read-only
Nonrevertive - After a switch to Prot port, even if the working comes up there is no switch to the working port back. Revertive - traffic is switched back to work port after it comes back. Enumeration: 'revertive': 2, 'nonrevertive': 1.
                                       oc3APSPairWorkingSFBERThreshold 1.3.6.1.4.1.1751.2.18.2.16.1.1.4 integer read-write
Bits error Rate threshold to declare signal failure Enumeration: 'tenToMinus5': 2, 'tenToMinus4': 1.
                                       oc3APSPairWorkingSDBERThreshold 1.3.6.1.4.1.1751.2.18.2.16.1.1.5 integer read-write
Bits error Rate threshold to declare signal degrade Enumeration: 'tenToMinus5': 1, 'tenToMinus7': 3, 'tenToMinus6': 2, 'tenToMinus8': 4.
                                       oc3APSPairProtectionSFBERThreshold 1.3.6.1.4.1.1751.2.18.2.16.1.1.6 integer read-write
Bits error Rate threshold to declare signal failure Enumeration: 'tenToMinus5': 2, 'tenToMinus4': 1.
                                       oc3APSPairProtectionSDBERThreshold 1.3.6.1.4.1.1751.2.18.2.16.1.1.7 integer read-write
Bits error Rate threshold to declare signal degrade Enumeration: 'tenToMinus5': 1, 'tenToMinus7': 3, 'tenToMinus6': 2, 'tenToMinus8': 4.
                                       oc3APSPairWTRPeriod 1.3.6.1.4.1.1751.2.18.2.16.1.1.8 integer read-write
Duration for Wait To Restore Period between 5 to 12 minutes. Ref: BellCore GR-253-Core, Issue 3, page 200, R5-56.
                                       oc3APSWorkingSlot 1.3.6.1.4.1.1751.2.18.2.16.1.1.9 integer32 read-only
Working slot of APS pair.
                                       oc3APSProtectionSlot 1.3.6.1.4.1.1751.2.18.2.16.1.1.10 integer32 read-only
Protection slot of APS pair.
                                       oc3APSActiveSlot 1.3.6.1.4.1.1751.2.18.2.16.1.1.11 integer32 read-only
Active slot of APS pair.
                                       oc3APSPairStatus 1.3.6.1.4.1.1751.2.18.2.16.1.1.12 integer read-only
noFailure : The protection line is not in use. modeMismatch : one end is configured unidirectional and the other is bidirectional (both the ends should be configured in the same mode). Also when one end is configured for 1:1 architechture and the other end indicates it is configured for 1:n architechture.(Bidirectional mode only) swByteFailure: protection switching byte failure - defect declared when invalid / persistantly unacceptable codes are received in the K1 byte. failure declared if defect persists for an extended period. Invalid code is when the incoming K1 byte contains an unused code or a code irrelevant for the specific switching operation.(Only in bi-directional mode) chMismatch : channel mismatch is declared when the channel numbers in the transmitted K1 byte and the received K2 byte do not match for 50 ms.Channel mismatch is monitored only in bidirectional mode. Enumeration: 'modeMismatch': 2, 'swByteFailure': 3, 'noFailure': 1, 'chMismatch': 4.
                                       oc3APSPairUserCommand 1.3.6.1.4.1.1751.2.18.2.16.1.1.13 integer read-write
APS Pair User Command Enumeration: 'manualSwitchToProtectionPort': 3, 'clear': 7, 'lockoutProtection': 6, 'manualSwitchToWorkingPort': 2, 'noAction': 1, 'forcedSwitchToProtectionPort': 5, 'forcedSwitchToWorkingPort': 4.
                                       oc3APSPairCurrentState 1.3.6.1.4.1.1751.2.18.2.16.1.1.14 integer read-only
Current State of the APS state machine Enumeration: 'localworkingSD': 26, 'localworkingSF': 28, 'localworkingForced': 30, 'remoteworkingSD': 58, 'remoteprotectLockOut': 47, 'remoteworkingSF': 60, 'localprotectForced': 14, 'remoteworkingDoNotRevert': 49, 'localprotectDoNotRevert': 1, 'remoteprotectManualSw': 40, 'remoteprotectForced': 46, 'localworkingDoNotRevert': 17, 'localprotectLockOut': 15, 'localprotectManualSw': 8, 'localprotectSD': 10, 'remoteprotectSD': 42, 'remoteprotectSF': 44, 'noRequest': 48, 'localprotectSF': 12, 'localworkingManualSw': 24, 'remoteprotectDoNotRevert': 33, 'remoteworkingManualSw': 56, 'remoteworkingForced': 62.
                                       oc3APSPairWorkingLineSignalStatus 1.3.6.1.4.1.1751.2.18.2.16.1.1.15 integer read-only
Signal Status of the working port (LOS / LOF / LCD / AIS etc.) Enumeration: 'signalDegradation': 2, 'lostCellDelineation': 8, 'lof': 256, 'protocolFailure': 4096, 'signalFailure': 4, 'ais-p': 64, 'noAlarm': 1, 'lineLoopBack': 2048, 'los': 512, 'lop': 128, 'moduleFailure': 1024, 'adminOutOfService': 8192, 'switchByteFailure': 16, 'ais-l': 32.
                                       oc3APSPairProtectionLineSignalStatus 1.3.6.1.4.1.1751.2.18.2.16.1.1.16 integer read-only
Signal Status of the protection port (LOS / LOF / LCD / AIS etc.) Enumeration: 'signalDegradation': 2, 'lostCellDelineation': 8, 'lof': 256, 'protocolFailure': 4096, 'signalFailure': 4, 'ais-p': 64, 'noAlarm': 1, 'lineLoopBack': 2048, 'los': 512, 'lop': 128, 'moduleFailure': 1024, 'adminOutOfService': 8192, 'switchByteFailure': 16, 'ais-l': 32.
                         sts1PortConfigTable 1.3.6.1.4.1.1751.2.18.2.17 no-access
Table of sts-1 specific port attributes
                               sts1PortConfigEntry 1.3.6.1.4.1.1751.2.18.2.17.1 no-access
Row definition for sts-1 specific port attributes
                                   sts1PortId 1.3.6.1.4.1.1751.2.18.2.17.1.1 intfindex no-access
slot/port: SSPP
                                   sts1LineCoding 1.3.6.1.4.1.1751.2.18.2.17.1.2 integer read-only
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. Enumeration: 'b3zs': 1.
                                   sts1LoopbackConfig 1.3.6.1.4.1.1751.2.18.2.17.1.3 integer read-write
This variable represents the loopback configuration of the sts-1 interface. See above diagrams for explanations of loops. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'localLoop': 2, 'payloadLoop': 4.
                                   sts1TransmitClockSource 1.3.6.1.4.1.1751.2.18.2.17.1.4 integer read-write
The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'cardFreeRun' indicates that a local oscillator on the I/O card is used as the transmit clock. Enumeration: 'cardFreeRun': 3, 'loopTiming': 1, 'localTiming': 2.
                                   sts1LineBuildOut 1.3.6.1.4.1.1751.2.18.2.17.1.5 integer read-write
sts-1 line build out Enumeration: 'short': 1, 'long': 2.
                                   sts1LineStatus 1.3.6.1.4.1.1751.2.18.2.17.1.6 integer read-only
sts-1 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback
                                   sts1StsPointers 1.3.6.1.4.1.1751.2.18.2.17.1.7 integer read-write
status of the sts-1 sts pointers Enumeration: 'floating': 2, 'locked': 1.
                                   sts1VtPointers 1.3.6.1.4.1.1751.2.18.2.17.1.8 integer read-write
status of the sts-1 vt pointers Enumeration: 'floating': 2, 'locked': 1.
                         tasmPortConfigTable 1.3.6.1.4.1.1751.2.18.2.18 no-access
Table of common physical Port attributes
                               tasmPortConfigEntry 1.3.6.1.4.1.1751.2.18.2.18.1 no-access
Row definition for common physical port attributes
                                   tasmPortId 1.3.6.1.4.1.1751.2.18.2.18.1.1 integer32 read-only
interface index - SSPP
                         protectionGroupConfigTable 1.3.6.1.4.1.1751.2.18.2.19 no-access
This table gives the list of Slot Protection Groups in the System. Slot protection group in one in which there are n cards being protected by 1 standby card.
                               protectionGroupConfigEntry 1.3.6.1.4.1.1751.2.18.2.19.1 no-access
Row Definition for the Protection Group Tables
                                   protectionSlotId 1.3.6.1.4.1.1751.2.18.2.19.1.1 integer no-access
Protection Group Index. Index is the slot id of the Slot Configured as Protection.
                                   workingSlotBitmap 1.3.6.1.4.1.1751.2.18.2.19.1.2 integer read-write
Working Slot Bitmap which the protection slot will monitor
                                   protectionCommand 1.3.6.1.4.1.1751.2.18.2.19.1.3 integer read-write
List of commands which can be executed on a protection Group. Clear : This command is used to clear any previous commands which may have been and get back to normal nto1 operation Forced SwitchOver To Protection : Switchover to Protection card even if the working card is in service active These commands to used in conjunction with the working slot id. Enumeration: 'clear': 1, 'forcedSwitchOverToProtection': 2.
                                   protectionCommandSlotId 1.3.6.1.4.1.1751.2.18.2.19.1.4 integer read-write
This is the working Slot to which command has to be applied
                                   protectionGroupStatus 1.3.6.1.4.1.1751.2.18.2.19.1.5 integer read-only
Protection Status of a Protection Card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carrying active traffic or not. Enumeration: 'outOfService-Standby': 5, 'none': 1, 'inservice-Standby': 3, 'outOfService-Active': 4, 'inservice-Active': 2.
                                   workingSlotId 1.3.6.1.4.1.1751.2.18.2.19.1.6 integer read-only
If protection group status is active, this field will give the slot which is being working. In case it is in standby mode this field will show 0
                                   workingFailedBitmap 1.3.6.1.4.1.1751.2.18.2.19.1.7 integer read-only
Gives Bitmap of the Failed Working Slots. Subset of the Working Slot Bitmap.
                                   protectionActiveCounter 1.3.6.1.4.1.1751.2.18.2.19.1.8 integer32 read-only
Give the Number of Times a Protection has gone to active.
                                   protectionOOSCounter 1.3.6.1.4.1.1751.2.18.2.19.1.9 integer32 read-only
Give the Number of Times a Protection Card has failed.
                     channelConfig 1.3.6.1.4.1.1751.2.18.3
                         taxiChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.1 no-access
Table of common physical Port attributes
                             taxiChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.1.1 no-access
Row definition for common physical port attributes
                                 taxiChannelId 1.3.6.1.4.1.1751.2.18.3.1.1.1 intfindex no-access
interface index - SSPPCC
                                 taxiChannelIfType 1.3.6.1.4.1.1751.2.18.3.1.1.2 integer read-write
UNI or NNI type Enumeration: 'iispNetwork': 5, 'unconfigured': 1, 'iispUser': 4, 'atmUni4-0': 6, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                 taxiChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.1.1.3 integer read-write
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                         ds3ChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.2 no-access
Table of common physical channel attributes
                             ds3ChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.2.1 no-access
Row definition for common physical channel attributes
                                 ds3ChannelId 1.3.6.1.4.1.1751.2.18.3.2.1.1 intfindex no-access
interface index - SSPPCCC
                                 ds3ChannelIfType 1.3.6.1.4.1.1751.2.18.3.2.1.2 integer read-write
UNI or NNI type, Enumeration: 'circuitEmulation': 10, 'iispNetwork': 5, 'frameRelayUni': 6, 'frameRelayNni': 7, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 8, 'atmUni4-0': 9, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                 ds3ChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.2.1.3 integer read-write
Interface type configured on DS3 channel Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                         ds1ChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.3 no-access
Table of common physical Port attributes
                             ds1ChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.3.1 no-access
Row definition for common physical port attributes
                                 ds1ChannelId 1.3.6.1.4.1.1751.2.18.3.3.1.1 intfindex no-access
interface index - SSPPCCC
                                 ds1ChannelIfType 1.3.6.1.4.1.1751.2.18.3.3.1.2 integer read-write
UNI or NNI type for ATM ,Frame Relay, or ISDN service interface type for channel Enumeration: 'circuitEmulation': 6, 'iispNetwork': 5, 'frameRelayUni': 7, 'pri-isdn-user': 12, 'gr303': 17, 'dbCirEm': 10, 'frameRelayNni': 11, 'pri-isdn-network': 9, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 14, 'hdlcPassThrough': 8, 'atmUni4-0': 16, 'casTrunkLine': 15, 'atmIma': 13, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                 ds1ChannelDs0Map 1.3.6.1.4.1.1751.2.18.3.3.1.3 octet string read-write
bit map of DS0 in channel
                                 ds1ChannelCellMapping 1.3.6.1.4.1.1751.2.18.3.3.1.4 integer read-write
cell delineation mode for ATM cell bearing services Enumeration: 'none': 2, 'directMapping': 1.
                                 ds1ChannelInputCodingRule 1.3.6.1.4.1.1751.2.18.3.3.1.5 integer read-write
enhancement feature Enumeration: 'none': 1, 'aLawPCM': 3, 'muLawPCM': 2, 'digital': 4.
                                 ds1ChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.3.1.6 integer read-write
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                                 ds1ChannelSignaling 1.3.6.1.4.1.1751.2.18.3.3.1.7 integer read-write
refers to robbed-bit signaling in circuitEmulation interfaces. Enumeration: 'disabled': 1, 'enabled': 2.
                                 ds1ChannelCellScramble 1.3.6.1.4.1.1751.2.18.3.3.1.8 integer read-write
refers to enabling/disabling cell scrambling on ATM interface. Enumeration: 'disabled': 1, 'enabled': 2.
                         msChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.4 no-access
Channel configuration table for multi-serial ports.
                             msChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.4.1 no-access
Row definition for multi-serial channel config.
                                 msChannelId 1.3.6.1.4.1.1751.2.18.3.4.1.1 intfindex no-access
interface index - SSPPCCC
                                 msChannelIfType 1.3.6.1.4.1.1751.2.18.3.4.1.2 integer read-write
interface type for multi-serial port Enumeration: 'circuitEmulation': 6, 'iispNetwork': 5, 'terminalEmulation': 7, 'frameRelayUni': 8, 'atmUni4-0': 12, 'frameRelayNni': 10, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 11, 'hdlcPassThrough': 9, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                 msChannelCellBearingMode 1.3.6.1.4.1.1751.2.18.3.4.1.3 integer read-write
The cell delineation mode is either LANET or CCITT based Enumeration: 'none': 3, 'lanet': 1, 'ccittDirectMapping': 2.
                                 msChannelCellBearingAddrMode 1.3.6.1.4.1.1751.2.18.3.4.1.4 integer read-write
standard - ATM Forum UNI 3.0/3.1 noiseTolerant - A proprietary noise tolerant address mapping scheme Enumeration: 'noiseTolerant': 2, 'standard': 1.
                                 msChannelCellBearingPayloadFec 1.3.6.1.4.1.1751.2.18.3.4.1.5 integer read-only
payload error correction scheme Enumeration: 'oneQuarterRate': 3, 'threeEighthsRate': 2, 'oneEighthRate': 4, 'dynamic': 1.
                                 msChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.4.1.6 integer read-write
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                         oc3ChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.5 no-access
Table of common physical Port attributes
                             oc3ChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.5.1 no-access
Row definition for common physical port attributes
                                 oc3ChannelId 1.3.6.1.4.1.1751.2.18.3.5.1.1 intfindex no-access
interface index - SSPPCC
                                 oc3ChannelIfType 1.3.6.1.4.1.1751.2.18.3.5.1.2 integer read-write
UNI or NNI type Enumeration: 'iispNetwork': 5, 'atmVnnUni3-1': 8, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 6, 'atmUni4-0': 7, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                 oc3ChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.5.1.3 integer read-write
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                         twoWireSourceChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.6 no-access
Table of common physical Port attributes
                             twoWireSourceChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.6.1 no-access
Row definition for common physical port attributes
                                 twoWireSourceChannelId 1.3.6.1.4.1.1751.2.18.3.6.1.1 intfindex no-access
interface index - SSPPCC
                                 twoWireSourceChannelIfType 1.3.6.1.4.1.1751.2.18.3.6.1.2 integer read-write
Interface types of 2W station(source) channel. Enumeration: 'circuitEmulation': 2, 'unconfigured': 1.
                                 twoWireSourceChannelConnectionType 1.3.6.1.4.1.1751.2.18.3.6.1.3 integer read-write
This field selects ATM virtual circuit connection type, PVC or SVC. Enumeration: 'pvc': 1, 'svc': 2.
                                 twoWireSourceChannelCompandingLaw 1.3.6.1.4.1.1751.2.18.3.6.1.4 integer read-only
This field selects channel encoding/decoding quantization interval, muLaw or aLaw. Enumeration: 'aLawPCM': 2, 'muLawPCM': 1.
                                 twoWireSourceChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.6.1.5 integer read-only
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                                 twoWireSourceChannelVoiceCompression 1.3.6.1.4.1.1751.2.18.3.6.1.6 integer read-only
voice compression scheme Enumeration: 'disabled': 1, 'adpcm16k': 3, 'adpcm32k': 2, 'adpcm8k': 4.
                                 twoWireSourceChannelEchoCancellation 1.3.6.1.4.1.1751.2.18.3.6.1.7 integer read-only
This field disables/enables twoWireSource card echo cancellation function. Enumeration: 'disabled': 1, 'enabled': 2.
                                 twoWireSourceChannelSilenceSupression 1.3.6.1.4.1.1751.2.18.3.6.1.8 integer read-only
This field disables/enables twoWireSource card silence suppression. Enumeration: 'disabled': 1, 'enabled': 2.
                                 twoWireSourceChannelEncapsulationAal 1.3.6.1.4.1.1751.2.18.3.6.1.9 integer read-only
This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data. Enumeration: 'lucent': 2, 'aal1': 1.
                                 twoWireSourceChannelSubscriberService 1.3.6.1.4.1.1751.2.18.3.6.1.10 integer read-write
This field selects subscribed channel service types. plar - Private Line Automatic Ring fxs - Foreign Exchange Subscriber End s-signaling - A proprietary specific signaling type based on AIN model. Enumeration: 'plar': 1, 's-signaling': 3, 'fxs': 2.
                         highSpeedChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.7 no-access
Table of common physical Port attributes
                             highSpeedChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.7.1 no-access
Row definition for common physical port attributes
                                 highSpeedChannelId 1.3.6.1.4.1.1751.2.18.3.7.1.1 intfindex no-access
interface index - SSPPCC
                                 highSpeedChannelIfType 1.3.6.1.4.1.1751.2.18.3.7.1.2 integer read-write
UNI or NNI type Enumeration: 'circuitEmulation': 6, 'iispNetwork': 5, 'unconfigured': 1, 'iispUser': 4, 'atmUni4-0': 7, 'atmUni3-1': 3, 'atmUni3-0': 2.
                         dspChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.8 no-access
Table of common physical Port attributes
                             dspChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.8.1 no-access
Row definition for common physical port attributes
                                 dspChannelId 1.3.6.1.4.1.1751.2.18.3.8.1.1 intfindex no-access
interface index - SSPPCC
                                 dspChannelIfType 1.3.6.1.4.1.1751.2.18.3.8.1.2 integer read-write
Channel Interface Type Enumeration: 'unconfigured': 1, 'dsp': 2.
                                 dspChannelInputCodingRule 1.3.6.1.4.1.1751.2.18.3.8.1.3 integer read-only
Input Coding Rule Enumeration: 'muLawPCM': 1.
                                 dspChannelVoiceCompression 1.3.6.1.4.1.1751.2.18.3.8.1.4 integer read-write
voice compression scheme Enumeration: 'adpcm16k': 2, 'adpcm32k': 1.
                                 dspChannelEchoCancellation 1.3.6.1.4.1.1751.2.18.3.8.1.5 integer read-only
voice compression scheme Enumeration: 'enabled': 1.
                                 dspChannelSilenceSupression 1.3.6.1.4.1.1751.2.18.3.8.1.6 integer read-only
voice compression scheme Enumeration: 'enabled': 1.
                         twoWireSinkChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.9 no-access
Table of common physical Port attributes
                             twoWireSinkChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.9.1 no-access
Row definition for common physical port attributes
                                 twoWireSinkChannelId 1.3.6.1.4.1.1751.2.18.3.9.1.1 intfindex no-access
interface index - SSPPCC
                                 twoWireSinkChannelIfType 1.3.6.1.4.1.1751.2.18.3.9.1.2 integer read-write
Interface types. Enumeration: 'circuitEmulation': 2, 'unconfigured': 1.
                                 twoWireSinkChannelConnectionType 1.3.6.1.4.1.1751.2.18.3.9.1.3 integer read-only
This field selects ATM virtual circuit connection type, PVC or SVC. Enumeration: 'pvc': 1, 'svc': 2.
                                 twoWireSinkChannelCompandingLaw 1.3.6.1.4.1.1751.2.18.3.9.1.4 integer read-only
This field selects channel encoding/decoding quantization interval, muLaw or aLaw. Enumeration: 'aLawPCM': 2, 'muLawPCM': 1.
                                 twoWireSinkChannelVoiceCompression 1.3.6.1.4.1.1751.2.18.3.9.1.5 integer read-only
voice compression scheme Enumeration: 'disabled': 1, 'adpcm16k': 3, 'adpcm32k': 2, 'adpcm8k': 4.
                                 twoWireSinkChannelEchoCancellation 1.3.6.1.4.1.1751.2.18.3.9.1.6 integer read-only
This field disables/enables twoWireSink card echo cancellation function. Enumeration: 'disabled': 1, 'enabled': 2.
                                 twoWireSinkChannelSilenceSupression 1.3.6.1.4.1.1751.2.18.3.9.1.7 integer read-only
This field disables/enables twoWireSink card silence suppression. Enumeration: 'disabled': 1, 'enabled': 2.
                                 twoWireSinkChannelEncapsulationAal 1.3.6.1.4.1.1751.2.18.3.9.1.8 integer read-only
This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data. Enumeration: 'lucent': 2, 'aal1': 1.
                                 twoWireSinkChannelSubscriberService 1.3.6.1.4.1.1751.2.18.3.9.1.9 integer read-only
The only available service type for twoWireSink card is Foreign Exchange Office End (fxo). Enumeration: 'fxo': 1.
                         e3ChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.10 no-access
Table of common physical channel attributes
                               e3ChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.10.1 no-access
Row definition for common physical channel attributes
                                   e3ChannelId 1.3.6.1.4.1.1751.2.18.3.10.1.1 intfindex no-access
interface index - SSPPCCC
                                   e3ChannelIfType 1.3.6.1.4.1.1751.2.18.3.10.1.2 integer read-write
Interface type configured on E3 channel Enumeration: 'circuitEmulation': 8, 'iispNetwork': 5, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 6, 'atmUni4-0': 7, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                   e3ChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.10.1.3 integer read-write
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                         e1ChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.11 no-access
Table of common physical Port attributes
                               e1ChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.11.1 no-access
Row definition for common physical port attributes
                                   e1ChannelId 1.3.6.1.4.1.1751.2.18.3.11.1.1 intfindex no-access
interface index - SSPPCCC
                                   e1ChannelIfType 1.3.6.1.4.1.1751.2.18.3.11.1.2 integer read-write
UNI or NNI type for ATM ,Frame Relay, or ISDN serviceinterface type for channel Enumeration: 'circuitEmulation': 6, 'iispNetwork': 5, 'frameRelayUni': 7, 'pri-isdn-user': 13, 'atmUni4-0': 15, 'frameRelayNni': 9, 'pri-isdn-network': 12, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 11, 'hdlcPassThrough': 8, 'casTrunkLine': 14, 'atmIma': 10, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                   e1ChannelDs0Map 1.3.6.1.4.1.1751.2.18.3.11.1.3 octet string read-write
bit map of DS0 in channel
                                   e1ChannelCellMapping 1.3.6.1.4.1.1751.2.18.3.11.1.4 integer read-write
cell delineation mode for ATM cell bearing services Enumeration: 'none': 2, 'directMapping': 1.
                                   e1ChannelInputCodingRule 1.3.6.1.4.1.1751.2.18.3.11.1.5 integer read-write
enhancement feature Enumeration: 'none': 1, 'aLawPCM': 3, 'muLawPCM': 2, 'digital': 4.
                                   e1ChannelSecuFeature 1.3.6.1.4.1.1751.2.18.3.11.1.6 integer read-write
enhancement feature Enumeration: 'secured': 2, 'unsecurable': 1, 'securable': 3.
                                   e1ChannelSignaling 1.3.6.1.4.1.1751.2.18.3.11.1.7 integer read-write
Refers to robbed-bit singaling in circuitEmulation interface. Enumeration: 'disabled': 1, 'enabled': 2.
                         ethernetChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.12 no-access
Table used for enthernet channel configuration.
                               ethernetChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.12.1 no-access
Row definition for enthernet channel attributes.
                                   ethernetChannelId 1.3.6.1.4.1.1751.2.18.3.12.1.1 integer32 no-access
Interface index
                                   ethernetChannelIfType 1.3.6.1.4.1.1751.2.18.3.12.1.2 integer read-write
Types of ethernet interface. There are two types of bridging interface(channel):bridge and routing. Enumeration: 'bridge': 2, 'unconfigured': 1, 'routing': 3.
                         dsp2Channel 1.3.6.1.4.1.1751.2.18.3.13
                               dsp2ChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.13.1 no-access
Table of Channel attributes
                                   dsp2ChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.13.1.1 no-access
Row definition for common physical port attributes
                                       dsp2ChannelId 1.3.6.1.4.1.1751.2.18.3.13.1.1.1 intfindex no-access
interface index - SSPPCC
                                       dsp2ChannelIfType 1.3.6.1.4.1.1751.2.18.3.13.1.1.2 integer read-write
Channel Interface Type Enumeration: 'dsp2': 2, 'unconfigured': 1.
                                       dsp2ChannelAlarmType 1.3.6.1.4.1.1751.2.18.3.13.1.1.3 integer read-only
This field is a read only failure which gives the status of a dsp.When the status is dspFailure the Operational Status at the interface level will go OOS Enumeration: 'noAlarm': 1, 'dspFailure': 2.
                                       dsp2ChannelModeConfig 1.3.6.1.4.1.1751.2.18.3.13.1.1.4 integer read-write
This field is used to configure the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. The complete list of enumerations of supported algorithms is given in the dsp2AlgorithmTable. The following description outlines the algorithms supported in each corresponding AlgoSet. algoSet1 : g168-echo-cancellation128ms algoSet2 : g726-voice-compression, g165-echo-cancellation, generic-silence-suppression, fax-modem-tone-detection, g168-echo-cancellation64ms. algoSet3 : g729a-voice-compression, g165-echo-cancellation, g729b-silence-suppression, fax-modem-tone-detection, g168-echo-cancellation64ms. algoSet4 : v17-fax-algorithm-upto-14400-bps, v29-fax-algorithm-upto-9600-bps, v27ter-fax-algorithm-upto-2400-bps, v21-fax-algorithm-upto-300-bps. algoSet5 : g168-echo-cancellation64ms. algoSet6 : g726-voice-compression, g729a-voice-compression, g729b-silence-suppression, g168-echo-cancellation64ms, v17-fax-algorithm-upto-14400-bps, v29-fax-algorithm-upto-9600-bps, v27ter-fax-algorithm-upto-2400-bps, v21-fax-algorithm-upto-300-bps. Enumeration: 'algoSet1': 1, 'algoSet3': 3, 'algoSet2': 2, 'algoSet5': 5, 'algoSet4': 4, 'algoSet6': 6.
                               dsp2AlgorithmTable 1.3.6.1.4.1.1751.2.18.3.13.2 no-access
Table of dsp2 algorithms assigned to interface.
                                   dsp2AlgorithmEntry 1.3.6.1.4.1.1751.2.18.3.13.2.1 no-access
Row definition for dsp2 algorithms assigned to interfaces.
                                       dsp2AlgorithmId 1.3.6.1.4.1.1751.2.18.3.13.2.1.1 intfindex no-access
interface index - SSPPCC
                                       dsp2AlgorithmType 1.3.6.1.4.1.1751.2.18.3.13.2.1.2 integer read-only
DSP Algorithm type. Enumeration: 'generic-silence-suppression': 3, 'g729a-voice-compression': 5, 'v21-fax-algorithm-upto-300-bps': 12, 'fax-modem-tone-detection': 4, 'g729b-silence-suppression': 6, 'v29-fax-algorithm-upto-9600-bps': 10, 'g726-voice-compression': 1, 'g168-echo-cancellation64ms': 7, 'g168-echo-cancellation128ms': 8, 'v17-fax-algorithm-upto-14400-bps': 9, 'v27ter-fax-algorithm-upto-2400-bps': 11, 'g165-echo-cancellation': 2.
                         imaGrpChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.14 no-access
Table used for the IMA virtual channel (group) configuration on cards that have physical interfaces configured as atmIma. Represents three channels that can be configured as IMA groups on port 7 of DS1 and E1 cards.
                               imaGrpChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.14.1 no-access
Row definition for common physical port attributes
                                   imaGrpChannelId 1.3.6.1.4.1.1751.2.18.3.14.1.1 intfindex no-access
interface index - SSPPCCC
                                   imaGrpChannelIfType 1.3.6.1.4.1.1751.2.18.3.14.1.2 integer read-write
interface type Enumeration: 'iispNetwork': 5, 'unconfigured': 1, 'iispUser': 4, 'atmPnni1-0': 6, 'atmUni4-0': 7, 'atmUni3-1': 3, 'atmUni3-0': 2.
                                   imaGrpChannelPortMap 1.3.6.1.4.1.1751.2.18.3.14.1.3 integer32 read-write
A bitmap that identifies the physical IMA interfaces in this group. The least significant bit represents port 1.
                                   imaGrpChannelNeState 1.3.6.1.4.1.1751.2.18.3.14.1.4 imagrpchannelendstate read-only
The current operational state of the near-end IMA Group State Machine.
                                   imaGrpChannelFeState 1.3.6.1.4.1.1751.2.18.3.14.1.5 imagrpchannelendstate read-only
The current operational state of the far-end IMA Group State Machine.
                                   imaGrpChannelFailureStatus 1.3.6.1.4.1.1751.2.18.3.14.1.6 integer read-only
The current failure status of the IMA group (the reason why the GTSM is in the down state). noFailure(1) no failure startUpNe(2) near-end is in the state of start-up startUpFe(3) far-end is in the state of start-up invalidMValueNe(4) near-end has invalid frame length invalidMValueFe(5) far-end has invalid frame length failedAssymetricNe(6) near-end failed due to incompatable symmetry failedAssymetricFe(7) far-end failed due to incompatable symmetry insuffLinksNe(8) Near-end reported less than the min number of Tx links are active or less than the min number of Rx links are active insuffLinksFe(9) Far-end reported less than the min number of Rx links are active or less than thenmin number of Tx links are active blockedNe(10) Near-end is administratively out-of-service blockedFe(11) Far-end is administratively out-of-service otherFailure(12) other failures Enumeration: 'insuffLinksFe': 9, 'startUpNe': 2, 'blockedFe': 11, 'insuffLinksNe': 8, 'noFailure': 1, 'invalidMValueNe': 4, 'failedAssymetricFe': 7, 'blockedNe': 10, 'startUpFe': 3, 'otherFailure': 12, 'invalidMValueFe': 5, 'failedAssymetricNe': 6.
                                   imaGrpChannelSymmetry 1.3.6.1.4.1.1751.2.18.3.14.1.7 integer read-only
Symmetry of the IMA group. Symmetric configuration: all ports of IMA group are configured as full-duplex. With symmetric configuration, operation is symmetric if no links failes; is asymmetric if a link fails so that the active forward and backward links between far-end and near-end are asymmetric. If the configuration is asymmetric, the operation can never be symmetric. Enumeration: 'symOperation': 1, 'asymOperation': 2, 'asymConfiguration': 3.
                                   imaGrpChannelMinNumTxLinks 1.3.6.1.4.1.1751.2.18.3.14.1.8 integer read-write
Minimum number of transmit links required to be Active for the IMA group to be in the Up state.
                                   imaGrpChannelMinNumRxLinks 1.3.6.1.4.1.1751.2.18.3.14.1.9 integer read-write
Minimum number of receive links required to be Active for the IMA group to be in the Up state.
                                   imaGrpChannelNeTxClkMode 1.3.6.1.4.1.1751.2.18.3.14.1.10 integer read-write
Transmit clocking mode used by the near-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of all IMA links are derived from the same source. The ITC configuration corresponds to the case where there is at least one IMA link whose transmit clock is derived from a source different than at least another link transmit clock. The underlying clock configuration must be set up by the user to ensure operation in the selected mode. Enumeration: 'itc': 2, 'ctc': 1.
                                   imaGrpChannelFeTxClkMode 1.3.6.1.4.1.1751.2.18.3.14.1.11 integer read-only
Transmit clocking mode used by the far-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of all IMA links are derived from the same source. The ITC configuration corresponds to the case where there is at least one IMA link whose transmit clock is derived from a source different than at least another link transmit clock. Enumeration: 'itc': 2, 'ctc': 1.
                                   imaGrpChannelTxImaId 1.3.6.1.4.1.1751.2.18.3.14.1.12 integer read-write
The IMA ID currently in use by the near-end IMA function.
                                   imaGrpChannelRxImaId 1.3.6.1.4.1.1751.2.18.3.14.1.13 integer read-only
The IMA ID currently in use by the far-end IMA function.
                                   imaGrpChannelTxFrameLength 1.3.6.1.4.1.1751.2.18.3.14.1.14 integer read-write
The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. Enumeration: 'm128': 128, 'm64': 64, 'm32': 32, 'm256': 256.
                                   imaGrpChannelRxFrameLength 1.3.6.1.4.1.1751.2.18.3.14.1.15 integer read-only
Value of IMA frame length as received from remote IMA function. Enumeration: 'm128': 128, 'm64': 64, 'm32': 32, 'm256': 256.
                                   imaGrpChannelDiffLinkDelayMax 1.3.6.1.4.1.1751.2.18.3.14.1.16 integer read-write
The maximum number of milliseconds of delay differential among the links that will be tolerated on this interface.
                                   imaGrpChannelLeastDelayLink 1.3.6.1.4.1.1751.2.18.3.14.1.17 intfindex read-only
The Interface Index of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if at least 1 link has been configured in the IMA group.
                                   imaGrpChannelDiffDelayMaxObs 1.3.6.1.4.1.1751.2.18.3.14.1.18 integer32 read-only
The latest maximum differential delay observed (in milliseconds), i.e. between the links having the least and most link propagation delay, among the receive links that are currently configured in the IMA group.
                                   imaGrpChannelAlphaValue 1.3.6.1.4.1.1751.2.18.3.14.1.19 integer read-write
This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA HUNT state.
                                   imaGrpChannelBetaValue 1.3.6.1.4.1.1751.2.18.3.14.1.20 integer read-write
This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA HUNT state.
                                   imaGrpChannelGammaValue 1.3.6.1.4.1.1751.2.18.3.14.1.21 integer read-write
This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA SYNC state from the PRESYNC state.
                                   imaGrpChannelStatsNeNumFailures 1.3.6.1.4.1.1751.2.18.3.14.1.22 integer32 read-only
The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported.
                                   imaGrpChannelStatsFeNumFailures 1.3.6.1.4.1.1751.2.18.3.14.1.23 integer32 read-only
The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported.
                                   imaGrpChannelStatsNumTxActLnks 1.3.6.1.4.1.1751.2.18.3.14.1.24 integer32 read-only
The number of links which are configured to transmit and are currently Active in this IMA group.
                                   imaGrpChannelStatsNumRxActLnks 1.3.6.1.4.1.1751.2.18.3.14.1.25 integer32 read-only
The number of links which are configured to receive and are currently Active in this IMA group.
                                   imaGrpChannelStatsTimer 1.3.6.1.4.1.1751.2.18.3.14.1.26 integer32 read-only
Time, in seconds, since last reset.
                                   imaGrpChannelCompatMode 1.3.6.1.4.1.1751.2.18.3.14.1.27 integer read-write
This is used to indicate interoperability mode to the I/O card in terms of reporting the link status at the correct location in the IMA Control Protocol (ICP) cell Enumeration: 'yes': 2, 'no': 1.
                         tasmChannelConfigTable 1.3.6.1.4.1.1751.2.18.3.15 no-access
Table of common physical Channel attributes
                               tasmChannelConfigEntry 1.3.6.1.4.1.1751.2.18.3.15.1 no-access
Row definition for common physical channel attributes
                                   tasmChannelId 1.3.6.1.4.1.1751.2.18.3.15.1.1 intfindex no-access
Interface index - SSPPCC
                                   tasmChannelIfType 1.3.6.1.4.1.1751.2.18.3.15.1.2 integer read-write
Channel Interface Type Enumeration: 'toneAnnce': 2, 'unconfigured': 1.
                                   tasmChannelAlarmType 1.3.6.1.4.1.1751.2.18.3.15.1.3 integer read-only
This field is a read only failure which gives the status of a DSP in the TASM card.When the status is tasmFailure the Operational Status at the interface level will go OOS Enumeration: 'tasmFailure': 2, 'noAlarm': 1.
                                   tasmChannelModeConfig 1.3.6.1.4.1.1751.2.18.3.15.1.4 integer read-write
This field is used to configure the mdoe in which a TASM DSP will be used asd a resource. The modes are explained as follows: casMode: DSP resource is used for DTMF/MF tone detection/generation and running the Type 100, 105, and 108 tests. tasMode: DSP resource is used for playing/compressing announcement. Enumeration: 'tasMode': 2, 'casMode': 1.
                     intfConfig 1.3.6.1.4.1.1751.2.18.5
                         atmUniConfigTable 1.3.6.1.4.1.1751.2.18.5.1 no-access
Table of atm user to network interface (UNI)
                             atmUniConfigEntry 1.3.6.1.4.1.1751.2.18.5.1.1 no-access
Row definition of atm UNI
                                 atmUniIfIndex 1.3.6.1.4.1.1751.2.18.5.1.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 atmUniAddrType 1.3.6.1.4.1.1751.2.18.5.1.1.2 integer read-write
atm address type Enumeration: 'nsap': 1, 'e164': 2, 'private': 3.
                                 atmUniSvcMinVpi 1.3.6.1.4.1.1751.2.18.5.1.1.3 integer read-write
The lower bound of the VPI for SVC connections.
                                 atmUniSvcMaxVpi 1.3.6.1.4.1.1751.2.18.5.1.1.4 integer read-write
The upper bound of the VPI for SVC connections.
                                 atmUniSvcMinVci 1.3.6.1.4.1.1751.2.18.5.1.1.5 integer read-write
The lower bound of the VCI for SVC connections.
                                 atmUniSvcMaxVci 1.3.6.1.4.1.1751.2.18.5.1.1.6 integer read-write
The upper bound of the VCI for SVC connections.
                                 atmUniAdminStatus 1.3.6.1.4.1.1751.2.18.5.1.1.7 integer read-write
The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 atmUniOperStatus 1.3.6.1.4.1.1751.2.18.5.1.1.8 integer read-only
The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 atmUniNwPrefix1 1.3.6.1.4.1.1751.2.18.5.1.1.9 octet string read-write
ATM Network Prefix 1
                                 atmUniOverSubscription 1.3.6.1.4.1.1751.2.18.5.1.1.10 integer read-write
Over subscription factor
                                 atmUniT303 1.3.6.1.4.1.1751.2.18.5.1.1.11 integer32 read-write
Timer T303 value - seconds
                                 atmUniT308 1.3.6.1.4.1.1751.2.18.5.1.1.12 integer32 read-write
Timer T308 value - seconds
                                 atmUniT309 1.3.6.1.4.1.1751.2.18.5.1.1.13 integer32 read-write
Timer T309 value - seconds
                                 atmUniT310 1.3.6.1.4.1.1751.2.18.5.1.1.14 integer32 read-write
Timer T310 value - seconds
                                 atmUniT313 1.3.6.1.4.1.1751.2.18.5.1.1.15 integer32 read-write
Timer T313 value - User side only - seconds
                                 atmUniT316 1.3.6.1.4.1.1751.2.18.5.1.1.16 integer32 read-write
Timer T316 value - seconds
                                 atmUniT317 1.3.6.1.4.1.1751.2.18.5.1.1.17 integer32 read-write
Timer T317 value - seconds
                                 atmUniT322 1.3.6.1.4.1.1751.2.18.5.1.1.18 integer32 read-write
Timer T322 value - seconds
                                 atmUniT398 1.3.6.1.4.1.1751.2.18.5.1.1.19 integer32 read-write
Timer T398 value - seconds
                                 atmUniT399 1.3.6.1.4.1.1751.2.18.5.1.1.20 integer32 read-write
Timer T399 value - seconds
                                 atmUniMyNeighborIpAddress 1.3.6.1.4.1.1751.2.18.5.1.1.21 ipaddress read-write
The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration.
                                 atmUniMyNeighborIfName 1.3.6.1.4.1.1751.2.18.5.1.1.22 displaystring read-write
The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration.
                                 atmUniVpiSig 1.3.6.1.4.1.1751.2.18.5.1.1.23 integer read-write
VPI value for the signalling channel for the UNI interface.
                                 atmUniVciSig 1.3.6.1.4.1.1751.2.18.5.1.1.24 integer read-write
VCI value for the signalling channel for the UNI interface.
                                 atmUniVpiIlmi 1.3.6.1.4.1.1751.2.18.5.1.1.25 integer read-write
VPI value for the ilmi channel for the UNI interface.
                                 atmUniVciIlmi 1.3.6.1.4.1.1751.2.18.5.1.1.26 integer read-write
VCI value for the ilmi channel for the UNI interface.
                                 atmUniAtmSignalingStatus 1.3.6.1.4.1.1751.2.18.5.1.1.27 integer read-write
Indicates if atm signaling is enabled or disabled for this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniMyIfName 1.3.6.1.4.1.1751.2.18.5.1.1.29 displaystring read-write
A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string.
                                 atmUniIlmiProtocolStatus 1.3.6.1.4.1.1751.2.18.5.1.1.30 integer read-write
The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniIlmiOperStatus 1.3.6.1.4.1.1751.2.18.5.1.1.31 integer read-only
The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. Enumeration: 'outOfService': 1, 'inService': 2.
                                 atmUniIlmiConfigProc 1.3.6.1.4.1.1751.2.18.5.1.1.32 integer read-write
ILMI Configuration Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniIlmiConnectProc 1.3.6.1.4.1.1751.2.18.5.1.1.33 integer read-write
ILMI Connectivity Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniIlmiAttachPtProc 1.3.6.1.4.1.1751.2.18.5.1.1.34 integer read-write
ILMI Attachment Point Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniIlmiSecureLinkProc 1.3.6.1.4.1.1751.2.18.5.1.1.35 integer read-write
ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniIlmiAddrRegProc 1.3.6.1.4.1.1751.2.18.5.1.1.36 integer read-write
ILMI Address Registration Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmUniIlmiTimerS 1.3.6.1.4.1.1751.2.18.5.1.1.37 integer32 read-write
Timer S (secs). Used to poll peer when link is down.
                                 atmUniIlmiTimerT 1.3.6.1.4.1.1751.2.18.5.1.1.38 integer32 read-write
Timer T (secs). Used to poll peer when link is up.
                                 atmUniIlmiRetryK 1.3.6.1.4.1.1751.2.18.5.1.1.39 integer32 read-write
Retry K - number of timeouts before link is declared down.
                                 atmUniIntfType 1.3.6.1.4.1.1751.2.18.5.1.1.40 integer read-write
atm interface type Enumeration: 'user': 1, 'network': 2.
                                 atmUniUserAddress 1.3.6.1.4.1.1751.2.18.5.1.1.41 octet string read-write
ATM User Address
                                 atmUniViSuppFlag 1.3.6.1.4.1.1751.2.18.5.1.1.42 integer read-write
virtual interface supp off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmUniUPCSupp 1.3.6.1.4.1.1751.2.18.5.1.1.43 integer read-write
upc supp off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmUniUbrLoadBalSupp 1.3.6.1.4.1.1751.2.18.5.1.1.44 integer read-write
load balancing supp for ubr conns off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmUniAvailBwIgr 1.3.6.1.4.1.1751.2.18.5.1.1.45 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for
                                 atmUniAvailBwEgr 1.3.6.1.4.1.1751.2.18.5.1.1.46 integer32 read-only
The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be accounted for
                                 atmUniVUNISuppFlag 1.3.6.1.4.1.1751.2.18.5.1.1.47 integer read-write
virtual UNI interface supp off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmUniUserAddrOrgScope 1.3.6.1.4.1.1751.2.18.5.1.1.48 integer read-write
ATM User Address Organizational scope Enumeration: 'organizationMinusOne': 7, 'global': 15, 'sitePlusOne': 6, 'intraCommunity': 11, 'regional': 13, 'intraOrganization': 8, 'localNetwork': 1, 'organizationPlusOne': 9, 'localNetworkPlusOne': 2, 'siteMinusOne': 4, 'localNetworkPlusTwo': 3, 'intraSite': 5, 'interRegional': 14, 'communityMinusOne': 10, 'communityPlusOne': 12.
                                 atmUniSscopRxWndSz 1.3.6.1.4.1.1751.2.18.5.1.1.49 integer read-write
The receive window size for the SSCOP layer
                                 atmUniConnTrafficShapingFlag 1.3.6.1.4.1.1751.2.18.5.1.1.50 integer read-write
Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                         atmIispConfigTable 1.3.6.1.4.1.1751.2.18.5.2 no-access
Table of atm iisp interface
                             atmIispConfigEntry 1.3.6.1.4.1.1751.2.18.5.2.1 no-access
Row definition of atm iisp interface
                                 atmIispIfIndex 1.3.6.1.4.1.1751.2.18.5.2.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 atmIispSvcMinVpi 1.3.6.1.4.1.1751.2.18.5.2.1.2 integer read-write
The lower bound of the VPI for SVC connections.
                                 atmIispSvcMaxVpi 1.3.6.1.4.1.1751.2.18.5.2.1.3 integer read-write
The upper bound of the VPI for SVC connections.
                                 atmIispSvcMinVci 1.3.6.1.4.1.1751.2.18.5.2.1.4 integer read-write
The lower bound of the VCI for SVC connections.
                                 atmIispSvcMaxVci 1.3.6.1.4.1.1751.2.18.5.2.1.5 integer read-write
The upper bound of the VCI for SVC connections.
                                 atmIispAdminStatus 1.3.6.1.4.1.1751.2.18.5.2.1.6 integer read-write
The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 atmIispOperStatus 1.3.6.1.4.1.1751.2.18.5.2.1.7 integer read-only
The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 atmIispOverSubscription 1.3.6.1.4.1.1751.2.18.5.2.1.8 integer read-write
Over subscription factor
                                 atmIispT303 1.3.6.1.4.1.1751.2.18.5.2.1.9 integer32 read-write
Timer value - seconds
                                 atmIispT308 1.3.6.1.4.1.1751.2.18.5.2.1.10 integer32 read-write
Timer value - seconds
                                 atmIispT309 1.3.6.1.4.1.1751.2.18.5.2.1.11 integer32 read-write
Timer value - seconds
                                 atmIispT310 1.3.6.1.4.1.1751.2.18.5.2.1.12 integer32 read-write
Timer value - seconds
                                 atmIispT316 1.3.6.1.4.1.1751.2.18.5.2.1.13 integer32 read-write
Timer value - seconds
                                 atmIispT317 1.3.6.1.4.1.1751.2.18.5.2.1.14 integer32 read-write
Timer value - seconds
                                 atmIispT322 1.3.6.1.4.1.1751.2.18.5.2.1.15 integer32 read-write
Timer value - seconds
                                 atmIispT398 1.3.6.1.4.1.1751.2.18.5.2.1.16 integer32 read-write
Timer value - seconds
                                 atmIispT399 1.3.6.1.4.1.1751.2.18.5.2.1.17 integer32 read-write
Timer value - seconds
                                 atmIispAtmSignalingStatus 1.3.6.1.4.1.1751.2.18.5.2.1.18 integer read-write
Indicates if atm signaling is enabled or disabled for this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                 atmIispAvailBwIgr 1.3.6.1.4.1.1751.2.18.5.2.1.19 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for.
                                 atmIispAvailBwEgr 1.3.6.1.4.1.1751.2.18.5.2.1.20 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for.
                                 atmIispUPCSupp 1.3.6.1.4.1.1751.2.18.5.2.1.21 integer read-write
upc supp off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmIispUbrLoadBalSupp 1.3.6.1.4.1.1751.2.18.5.2.1.22 integer read-write
load balancing supp for ubr conns off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmIispSscopRxWndSz 1.3.6.1.4.1.1751.2.18.5.2.1.23 integer read-write
The receive window size for the SSCOP layer
                                 atmIispConnTrafficShapingFlag 1.3.6.1.4.1.1751.2.18.5.2.1.24 integer read-write
Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                         atmCirEmConfigTable 1.3.6.1.4.1.1751.2.18.5.3 no-access
Table for ATM Circuit Emulation Interface
                             atmCirEmConfigEntry 1.3.6.1.4.1.1751.2.18.5.3.1 no-access
Row definition for ATM Circuit Emulation interface
                                 atmCirEmIfIndex 1.3.6.1.4.1.1751.2.18.5.3.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 atmCirEmAdminStatus 1.3.6.1.4.1.1751.2.18.5.3.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 atmCirEmOperStatus 1.3.6.1.4.1.1751.2.18.5.3.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 atmCirEmCASIdleAbcdPattern 1.3.6.1.4.1.1751.2.18.5.3.1.4 integer read-write
abcd bit pattern for cirEm AIS
                                 atmCirEmCASBusyAbcdPattern 1.3.6.1.4.1.1751.2.18.5.3.1.5 integer read-write
abcd bit pattern for cirEm RDI
                                 atmCirEmAlarmDataPattern 1.3.6.1.4.1.1751.2.18.5.3.1.6 integer read-write
data pattern for cirEm AIS
                                 atmCirEmTCPattern 1.3.6.1.4.1.1751.2.18.5.3.1.7 integer read-write
Should abcd bits be toggled after 2.5 Secs. Enumeration: 'casIdle': 1, 'casBusy': 2.
                                 atmCirEmDownStInterworking 1.3.6.1.4.1.1751.2.18.5.3.1.8 integer read-write
This field will be used to select the type of interworking to be done in the down stream direction. Enumeration: 'oAM': 2, 'unSupp': 1, 'trunkCond': 3.
                         atmTermEmConfigTable 1.3.6.1.4.1.1751.2.18.5.4 no-access
Table for ATM Terminal Emulation Interface
                             atmTermEmConfigEntry 1.3.6.1.4.1.1751.2.18.5.4.1 no-access
Row definition for ATM Terminal Emulation interface
                                 atmTermEmIfIndex 1.3.6.1.4.1.1751.2.18.5.4.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 atmTermEmRxTimeOut 1.3.6.1.4.1.1751.2.18.5.4.1.2 integer read-write
receive timeout value in tenths of seconds.
                                 atmTermEmAdminStatus 1.3.6.1.4.1.1751.2.18.5.4.1.3 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 atmTermEmOperStatus 1.3.6.1.4.1.1751.2.18.5.4.1.4 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                         hdlcConfigTable 1.3.6.1.4.1.1751.2.18.5.5 no-access
Table for an HDLC Pass Through Interface
                             hdlcConfigEntry 1.3.6.1.4.1.1751.2.18.5.5.1 no-access
Row definition for an HDLC Pass Through interface
                                 hdlcIfIndex 1.3.6.1.4.1.1751.2.18.5.5.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 hdlcAdminStatus 1.3.6.1.4.1.1751.2.18.5.5.1.2 integer read-write
The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 hdlcOperStatus 1.3.6.1.4.1.1751.2.18.5.5.1.3 integer read-only
The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 hdlcThroughPut 1.3.6.1.4.1.1751.2.18.5.5.1.4 integer read-write
The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb Enumeration: 'k56': 2, 'k64': 1.
                                 hdlcDataInversion 1.3.6.1.4.1.1751.2.18.5.5.1.5 integer read-write
Flag indicating whether data inversion is performed by the IO card for this interface. Enumeration: 'disabled': 1, 'enabled': 2.
                         frUniConfigTable 1.3.6.1.4.1.1751.2.18.5.6 no-access
Table for Frame Realy UNI Interface
                             frUniConfigEntry 1.3.6.1.4.1.1751.2.18.5.6.1 no-access
Row definition for Frame Relay interface
                                 frUniIfIndex 1.3.6.1.4.1.1751.2.18.5.6.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 frUniAddrDlciLen 1.3.6.1.4.1.1751.2.18.5.6.1.2 integer read-only
Length of Data Link connection identify of frame relay UNI address Enumeration: 'twoOctets10Bits': 1.
                                 frUniDlcmiState 1.3.6.1.4.1.1751.2.18.5.6.1.3 integer read-write
The state of Data Link Connection Management Indentify of frame relay UNI. Enumeration: 'noLmi': 1, 'lmiDce': 3, 'lmiDte': 2, 'lmiNni': 4.
                                 frUniAdminStatus 1.3.6.1.4.1.1751.2.18.5.6.1.4 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 frUniOperStatus 1.3.6.1.4.1.1751.2.18.5.6.1.5 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 frUniOverSubscription 1.3.6.1.4.1.1751.2.18.5.6.1.6 integer read-write
Allow for the 'reserved' bandwidth allocated to oversubscribe the line by up to a factor of 10 . Generally, a figure of between 1 and 4 is normally a safe bet, although higher levels are often acceptable.
                                 frUniLmiProtocol 1.3.6.1.4.1.1751.2.18.5.6.1.7 integer read-write
Lmi protocol to run Enumeration: 'ansi': 3, 'none': 1, 'ccitt': 2, 'att': 4.
                                 frUniInterworkingType 1.3.6.1.4.1.1751.2.18.5.6.1.8 integer read-write
frf5 - fr/atm network interworking frf8 - fr/atm service interworking Enumeration: 'frf5': 1, 'frf8': 2.
                                 frUniN391 1.3.6.1.4.1.1751.2.18.5.6.1.9 integer read-write
full status polling counter. DTE:Mandatory, DCE:N/A
                                 frUniN392 1.3.6.1.4.1.1751.2.18.5.6.1.10 integer read-write
error threshold. DTE:Mandatory, DCE:Mandatory
                                 frUniN393 1.3.6.1.4.1.1751.2.18.5.6.1.11 integer read-write
Monitored event count. DTE:Mandatory, DCE:N/A
                                 frUniT391 1.3.6.1.4.1.1751.2.18.5.6.1.12 integer read-write
Link integrity verification timer. DTE:Mandatory, DCE:N/A
                                 frUniT392 1.3.6.1.4.1.1751.2.18.5.6.1.13 integer read-write
Polling verification timer. DTE:N/A, DCE:Mandatory
                                 frUniAsyncLmi 1.3.6.1.4.1.1751.2.18.5.6.1.14 integer read-write
Async PVC status messages Enumeration: 'disabled': 2, 'enabled': 1.
                                 frLmiOperStatus 1.3.6.1.4.1.1751.2.18.5.6.1.15 integer read-only
The operational status of the lmi protocol: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 frUniNT3 1.3.6.1.4.1.1751.2.18.5.6.1.16 integer read-write
Message frequency timer relevant for ATT LMI only.
                                 frUniThroughPut 1.3.6.1.4.1.1751.2.18.5.6.1.17 integer read-write
The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb Enumeration: 'k56': 2, 'k64': 1.
                         dspConfigTable 1.3.6.1.4.1.1751.2.18.5.7 no-access
Table for Dsp Interface
                             dspConfigEntry 1.3.6.1.4.1.1751.2.18.5.7.1 no-access
Row definition for Dsp interface
                                 dspIfIndex 1.3.6.1.4.1.1751.2.18.5.7.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 dspAdminStatus 1.3.6.1.4.1.1751.2.18.5.7.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 dspOperStatus 1.3.6.1.4.1.1751.2.18.5.7.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                         bridgeConfigTable 1.3.6.1.4.1.1751.2.18.5.8 no-access
Table which hold Config Entries for all bridges.
                             bridgeConfigEntry 1.3.6.1.4.1.1751.2.18.5.8.1 no-access
Row definition for bridge entries
                                 bridgeIfIndex 1.3.6.1.4.1.1751.2.18.5.8.1.1 integer32 no-access
interface index (slot/port/channel) SSPPCCC
                                 bridgeAdminStatus 1.3.6.1.4.1.1751.2.18.5.8.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                 bridgeOperStatus 1.3.6.1.4.1.1751.2.18.5.8.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 bridgeNumber 1.3.6.1.4.1.1751.2.18.5.8.1.4 integer read-write
The number of bridges
                                 bridgePortPriority 1.3.6.1.4.1.1751.2.18.5.8.1.5 integer read-write
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
                                 bridgePathCost 1.3.6.1.4.1.1751.2.18.5.8.1.6 integer read-write
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802-1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
                                 bridgeConnectionType 1.3.6.1.4.1.1751.2.18.5.8.1.7 integer read-write
Connection types Enumeration: 'llc': 2, 'vc': 1.
                         bridgeDomainTable 1.3.6.1.4.1.1751.2.18.5.9 no-access
A table which holds the bridgeDomainEntry data
                             bridgeDomainEntry 1.3.6.1.4.1.1751.2.18.5.9.1 no-access
A table entry for a Bridge Domain on an ethernet card
                                 bridgeDomainNumber 1.3.6.1.4.1.1751.2.18.5.9.1.1 integer32 no-access
The bridge number of the bridge which this interface is a part of. If the interface is currently not associated with any bridge this will be set to none.
                                 bridgeDomainAdminStatus 1.3.6.1.4.1.1751.2.18.5.9.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 bridgeDomainOperStatus 1.3.6.1.4.1.1751.2.18.5.9.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                 bridgeDomainPriority 1.3.6.1.4.1.1751.2.18.5.9.1.4 integer read-write
The value of the writeable portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
                                 bridgeDomainTimeSinceTopologyChange 1.3.6.1.4.1.1751.2.18.5.9.1.5 timeticks read-only
The time (in hundredths of a second) since the last time a topology change was detedted by the bridge entity.
                                 bridgeDomainDesignatedRoot 1.3.6.1.4.1.1751.2.18.5.9.1.6 octet string read-only
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                                 bridgeDomainRootCost 1.3.6.1.4.1.1751.2.18.5.9.1.7 integer32 read-only
The cost of the path to the root as seen from this bridge.
                                 bridgeDomainRootPort 1.3.6.1.4.1.1751.2.18.5.9.1.8 integer32 read-only
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
                                 bridgeDomainMaxMessageAge 1.3.6.1.4.1.1751.2.18.5.9.1.9 integer32 read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                                 bridgeDomainHelloTime 1.3.6.1.4.1.1751.2.18.5.9.1.10 integer32 read-only
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                                 bridgeDomainHoldTime 1.3.6.1.4.1.1751.2.18.5.9.1.11 integer32 read-only
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
                                 bridgeDomainForwardDelay 1.3.6.1.4.1.1751.2.18.5.9.1.12 integer32 read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to bridgeDomainBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
                                 bridgeDomainMaxBridgeAge 1.3.6.1.4.1.1751.2.18.5.9.1.13 integer read-write
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of bridgeDomainBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                                 bridgeDomainBridgeHelloTime 1.3.6.1.4.1.1751.2.18.5.9.1.14 integer read-write
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                                 bridgeDomainBridgeForwardDelay 1.3.6.1.4.1.1751.2.18.5.9.1.15 integer read-write
The value that all bridges user for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of bridgeDomainMaxBridgeAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                                 bridgeDomainAgingTime 1.3.6.1.4.1.1751.2.18.5.9.1.16 integer read-write
The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
                                 bridgeDomainSpanningTree 1.3.6.1.4.1.1751.2.18.5.9.1.17 integer read-write
Allows the bridge to be configured to run without the spanning tree algorithm. Enumeration: 'disabled': 2, 'enabled': 1.
                                 bridgeDomainTopologyChanges 1.3.6.1.4.1.1751.2.18.5.9.1.18 integer32 read-only
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
                                 bridgeDomainLearnedEntryDiscards 1.3.6.1.4.1.1751.2.18.5.9.1.19 integer32 read-only
The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
                                 bridgeDomainTimer 1.3.6.1.4.1.1751.2.18.5.9.1.20 integer32 read-only
Number of seconds elapsed since the last reset of bridge group statistics
                                 bridgeDomainDefaultGateway 1.3.6.1.4.1.1751.2.18.5.9.1.21 ipaddress read-write
The default gateway for this bridge domain. This is now an obsolete entry
                                 bridgeDomainPortStatusBitmap 1.3.6.1.4.1.1751.2.18.5.9.1.22 octet string read-only
A bit map describing which ports in a bridge group are up or down
                         routerConfigTable 1.3.6.1.4.1.1751.2.18.5.10 no-access
Table which hold Config Entries for all routers (VPNs)
                               routerConfigEntry 1.3.6.1.4.1.1751.2.18.5.10.1 no-access
config data for a router (VPN)
                                   routerIfIndex 1.3.6.1.4.1.1751.2.18.5.10.1.1 integer32 no-access
A scalar number which identifies an IP interface within a given router (VPN)
                                   routerAdminStatus 1.3.6.1.4.1.1751.2.18.5.10.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   routerOperStatus 1.3.6.1.4.1.1751.2.18.5.10.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   routerIpAddress 1.3.6.1.4.1.1751.2.18.5.10.1.4 ipaddress read-write
router ATM IP Address.
                                   routerIpNetworkMask 1.3.6.1.4.1.1751.2.18.5.10.1.5 ipaddress read-write
An IP network mask for an IP interface within a given router (VPN)
                                   routerNumber 1.3.6.1.4.1.1751.2.18.5.10.1.6 integer read-write
A scalar number which identifies a given router (VPN)
                                   routerEthernetIpAddress 1.3.6.1.4.1.1751.2.18.5.10.1.7 ipaddress read-write
router Ethernet IP Address.
                         isdnConfig 1.3.6.1.4.1.1751.2.18.5.11
                               isdnIntfConfigTable 1.3.6.1.4.1.1751.2.18.5.11.1 no-access
Table of ISDN interface configuration attriburtes
                                   isdnIntfConfigEntry 1.3.6.1.4.1.1751.2.18.5.11.1.1 no-access
Row definition for ISDN interface configuration table
                                       isdnIntfId 1.3.6.1.4.1.1751.2.18.5.11.1.1.1 integer32 no-access
Interface ID (SSPPCCC)
                                       isdnIntfDChanId 1.3.6.1.4.1.1751.2.18.5.11.1.1.2 integer32 read-write
D-Channel Number - if the Dchannel no. is 0 no LAPD will run on this PRI-ISDN interface
                                       isdnIntfAdminStatus 1.3.6.1.4.1.1751.2.18.5.11.1.1.3 integer read-write
ISDN interface admin status Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                       isdnIntfOperStatus 1.3.6.1.4.1.1751.2.18.5.11.1.1.4 integer read-write
ISDN interface operational status Enumeration: 'outOfService': 1, 'inService': 2.
                                       isdnIntfSwitchType 1.3.6.1.4.1.1751.2.18.5.11.1.1.5 integer read-write
ISDN interface Switch Type Enumeration: 'pri-dms100': 7, 'pri-net5': 2, 'pri-net5sw': 10, 'pri-kdd': 8, 'pri-vn': 12, 'pri-1tr6': 3, 'pri-5ess': 5, 'pri-ts014': 11, 'pri-4ess': 4, 'pri-dass2': 6, 'pri-ntt': 9, 'pri-ni2': 1.
                               isdnL2ConfigTable 1.3.6.1.4.1.1751.2.18.5.11.2 no-access
Table of Layer 2 (LAPD) attributes
                                   isdnL2ConfigEntry 1.3.6.1.4.1.1751.2.18.5.11.2.1 no-access
Row definition for ISDN LAPD parameters
                                       isdnL2IntfId 1.3.6.1.4.1.1751.2.18.5.11.2.1.1 integer32 no-access
Interface index (SSPPCCC)
                                       isdnT200 1.3.6.1.4.1.1751.2.18.5.11.2.1.2 integer read-write
value of L2 T200 timer in 1/10 seconds
                                       isdnT203 1.3.6.1.4.1.1751.2.18.5.11.2.1.3 integer read-write
value of L2 T203 timer in seconds
                                       isdnN200 1.3.6.1.4.1.1751.2.18.5.11.2.1.4 integer read-write
Maximum number of retransmissions before the LAPD Link is declared as down
                                       isdnN201 1.3.6.1.4.1.1751.2.18.5.11.2.1.5 integer read-write
Maximum number of octets in an information field - Maximum value of this parameter will be 300 bytes.
                                       isdnK 1.3.6.1.4.1.1751.2.18.5.11.2.1.6 integer read-write
Maximum number of outstanding I frames - L2 - window size.
                                       isdnL2OperStatus 1.3.6.1.4.1.1751.2.18.5.11.2.1.7 integer read-only
ISDN Layer 2 operational status - not-initiated means that first SETUP message has not been transmitted and L2 estalishment procedure has not been initiated yet Enumeration: 'down': 3, 'up': 2, 'not-initiated': 1.
                                       isdnL2CurrentState 1.3.6.1.4.1.1751.2.18.5.11.2.1.8 integer read-only
ISDN Layer 2 protocol's current state Enumeration: 'tei-unassigned': 1, 'awaiting-release': 6, 'timer-recovery': 8, 'awaiting-establishment': 5, 'tei-assigned': 4, 'multiple-frame-established': 7.
                               isdnBChanConfigTable 1.3.6.1.4.1.1751.2.18.5.11.3 no-access
Table of ISDN B Channel configuration attriburtes
                                   isdnBChanConfigEntry 1.3.6.1.4.1.1751.2.18.5.11.3.1 no-access
Row definition for ISDN B Channel configuration table
                                       isdnBChanId 1.3.6.1.4.1.1751.2.18.5.11.3.1.1 integer32 no-access
B Chan ID (SSPPCCC)
                                       isdnBChanAdminStatus 1.3.6.1.4.1.1751.2.18.5.11.3.1.2 integer read-write
ISDN B Chan admin status Enumeration: 'outOfService': 1, 'inService': 2.
                                       isdnBChanOperStatus 1.3.6.1.4.1.1751.2.18.5.11.3.1.3 integer read-write
ISDN B Chan operational status Enumeration: 'outOfService': 1, 'inService': 2.
                         atmDbCirEmConfigTable 1.3.6.1.4.1.1751.2.18.5.12 no-access
Table for ATM DBCES Interface
                               atmDbCirEmConfigEntry 1.3.6.1.4.1.1751.2.18.5.12.1 no-access
Row definition for ATM Dynamic Bandwidth Circuit Emulation interface.
                                   atmDbCirEmIfIndex 1.3.6.1.4.1.1751.2.18.5.12.1.1 intfindex no-access
Interface index (slot/port/channel) SSPPCCC.
                                   atmDbCirEmAdminStatus 1.3.6.1.4.1.1751.2.18.5.12.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   atmDbCirEmOperStatus 1.3.6.1.4.1.1751.2.18.5.12.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   atmDbCirEmIdlePattern 1.3.6.1.4.1.1751.2.18.5.12.1.7 integer32 read-write
Idle pattern for idle data.
                                   atmDbCirEmServiceType 1.3.6.1.4.1.1751.2.18.5.12.1.8 integer read-write
Service type to be used. Affects the ABCD Signaling. Enumeration: 'plar': 1, 'fxo-groundstart': 4, 'fxs-loopstart': 3, 'fxs-groundstart': 5, 'fxo-loopstart': 2.
                                   atmDbCirEmDbcesType 1.3.6.1.4.1.1751.2.18.5.12.1.9 integer read-write
The type of dbces used. yurie: Yurie proprietary specific. Enumeration: 'lucent': 1.
                                   atmDbCirEmIntegrationTime 1.3.6.1.4.1.1751.2.18.5.12.1.10 integer read-write
This specifies the time to wait after receiving idle pattern to change state. The unit is in seconds.
                         lmiDlciConfigTable 1.3.6.1.4.1.1751.2.18.5.13 no-access
Table for Lmi DLCI Interface.
                               lmiDlciConfigEntry 1.3.6.1.4.1.1751.2.18.5.13.1 no-access
Row definition for Lmi DLCI Interface.
                                   lmiDlciIfIndex 1.3.6.1.4.1.1751.2.18.5.13.1.1 intfindex no-access
Interface index (slot/port/channel) SSPPCCC.
                                   lmiDlci 1.3.6.1.4.1.1751.2.18.5.13.1.2 integer32 no-access
dlci.
                                   lmiDlciOperStatus 1.3.6.1.4.1.1751.2.18.5.13.1.3 integer read-only
The operational status of the lmi protocol: 'outOfService' protocol is out of service 'inService' protocol is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   lmiDlciStatusTime 1.3.6.1.4.1.1751.2.18.5.13.1.4 integer32 read-only
Time since last status transition occurred.
                         dsp2ConfigTable 1.3.6.1.4.1.1751.2.18.5.14 no-access
Table for Dsp2 Interface
                               dsp2ConfigEntry 1.3.6.1.4.1.1751.2.18.5.14.1 no-access
Row definition for Dsp2 interface
                                   dsp2IfIndex 1.3.6.1.4.1.1751.2.18.5.14.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                   dsp2AdminStatus 1.3.6.1.4.1.1751.2.18.5.14.1.2 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   dsp2OperStatus 1.3.6.1.4.1.1751.2.18.5.14.1.3 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   dsp2LoadCount 1.3.6.1.4.1.1751.2.18.5.14.1.4 integer32 read-only
Gives the number of calls going through that dsp. This will be of use in case of deletion of dsp interface. When no calls are going through the dsp this value will be 0
                                   dsp2AalMode 1.3.6.1.4.1.1751.2.18.5.14.1.5 integer read-write
aal2-non-multiplexed : Does not support multiplexing of multiple channels with one trunk aal2-standard: Support Standard Aal2 Multiplexing aal1:Support Aal1 mode. Enumeration: 'aal2-non-multiplexed': 1, 'aal2-standard': 2, 'aal1': 3.
                         atmImaConfigTable 1.3.6.1.4.1.1751.2.18.5.15 no-access
Inverse Multiplexing interface table.
                               atmImaConfigEntry 1.3.6.1.4.1.1751.2.18.5.15.1 no-access
Row definition for Inverse Multiplexing attributes
                                   atmImaIntfIndex 1.3.6.1.4.1.1751.2.18.5.15.1.1 integer32 no-access
interface index (slot/port/channel) SSPPCCC
                                   atmImaNeTxState 1.3.6.1.4.1.1751.2.18.5.15.1.2 integer read-only
The near-end transmit state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. Enumeration: 'unusableInhibited': 5, 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableFault': 3, 'active': 8, 'unusableNoReason': 2, 'notInGroup': 1.
                                   atmImaNeRxState 1.3.6.1.4.1.1751.2.18.5.15.1.3 integer read-only
The near-end receive state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. Enumeration: 'unusableInhibited': 5, 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableFault': 3, 'active': 8, 'unusableNoReason': 2, 'notInGroup': 1.
                                   atmImaFeTxState 1.3.6.1.4.1.1751.2.18.5.15.1.4 integer read-only
The far-end transmit state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. Enumeration: 'unusableInhibited': 5, 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableFault': 3, 'active': 8, 'unusableNoReason': 2, 'notInGroup': 1.
                                   atmImaFeRxState 1.3.6.1.4.1.1751.2.18.5.15.1.5 integer read-only
The far-end receive state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use. Enumeration: 'unusableInhibited': 5, 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableFault': 3, 'active': 8, 'unusableNoReason': 2, 'notInGroup': 1.
                                   atmImaNeRxDefect 1.3.6.1.4.1.1751.2.18.5.15.1.6 integer read-only
The near-end receive defect. noDefect -- No link defect exists linkFailure -- Physical failure/ Loss of signal lifDefect -- Persistence of LIF defect at near-end (Loss of IMA Frame) lodsDefect -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) Enumeration: 'lods': 4, 'noDefect': 1, 'linkFailure': 2, 'lif': 3.
                                   atmImaFeRxDefect 1.3.6.1.4.1.1751.2.18.5.15.1.7 integer read-only
The far-end receive defect. noDefect -- No link defect exists linkFailure -- Physical failure/ Loss of signal lifDefect -- Persistence of LIF defect at near-end (Loss of IMA Frame) lodsDefect -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) Enumeration: 'lods': 4, 'noDefect': 1, 'linkFailure': 2, 'lif': 3.
                                   atmImaAdminStatus 1.3.6.1.4.1.1751.2.18.5.15.1.8 integer read-write
The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   atmImaOperStatus 1.3.6.1.4.1.1751.2.18.5.15.1.9 integer read-only
The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                         atmPnniConfigTable 1.3.6.1.4.1.1751.2.18.5.16 no-access
Table of atm PNNI Configuration
                               atmPnniConfigEntry 1.3.6.1.4.1.1751.2.18.5.16.1 no-access
Row definition of PNNI Configuration
                                   atmPnniIfIndex 1.3.6.1.4.1.1751.2.18.5.16.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                   atmPnniSvcMinVpi 1.3.6.1.4.1.1751.2.18.5.16.1.2 integer read-write
The lower bound of the VPI for SVC connections.
                                   atmPnniSvcMaxVpi 1.3.6.1.4.1.1751.2.18.5.16.1.3 integer read-write
The upper bound of the VPI for SVC connections.
                                   atmPnniSvcMinVci 1.3.6.1.4.1.1751.2.18.5.16.1.4 integer read-write
The lower bound of the VCI for SVC connections.
                                   atmPnniSvcMaxVci 1.3.6.1.4.1.1751.2.18.5.16.1.5 integer read-write
The upper bound of the VCI for SVC connections.
                                   atmPnniAdminStatus 1.3.6.1.4.1.1751.2.18.5.16.1.6 integer read-write
The administrative action: 'outOfService' means take the PNNI out of service 'inService' means take the PNNI in service 'delete' remove/deconfigure the PNNI. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   atmPnniOperStatus 1.3.6.1.4.1.1751.2.18.5.16.1.7 integer read-only
The operational status of the PNNI: 'outOfService' means the PNNI is out of service 'inService' means the PNNI is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   atmPnniT303 1.3.6.1.4.1.1751.2.18.5.16.1.8 integer32 read-write
Timer T303 value - seconds
                                   atmPnniT308 1.3.6.1.4.1.1751.2.18.5.16.1.9 integer32 read-write
Timer T308 value - seconds
                                   atmPnniT309 1.3.6.1.4.1.1751.2.18.5.16.1.10 integer32 read-write
Timer T309 value - seconds
                                   atmPnniT310 1.3.6.1.4.1.1751.2.18.5.16.1.11 integer32 read-write
Timer T310 value - seconds
                                   atmPnniT313 1.3.6.1.4.1.1751.2.18.5.16.1.12 integer32 read-write
Timer T313 value - User side only - seconds
                                   atmPnniT316 1.3.6.1.4.1.1751.2.18.5.16.1.13 integer32 read-write
Timer T316 value - seconds
                                   atmPnniT317 1.3.6.1.4.1.1751.2.18.5.16.1.14 integer32 read-write
Timer T317 value - seconds
                                   atmPnniT322 1.3.6.1.4.1.1751.2.18.5.16.1.15 integer32 read-write
Timer T322 value - seconds
                                   atmPnniT397 1.3.6.1.4.1.1751.2.18.5.16.1.16 integer32 read-write
Timer T397 value - seconds
                                   atmPnniT398 1.3.6.1.4.1.1751.2.18.5.16.1.17 integer32 read-write
Timer T398 value - seconds
                                   atmPnniT399 1.3.6.1.4.1.1751.2.18.5.16.1.18 integer32 read-write
Timer T399 value - seconds
                                   atmPnniCbrServCatSupp 1.3.6.1.4.1.1751.2.18.5.16.1.19 integer read-write
If CBR category is supported Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniCbrGcacClpEqualZero 1.3.6.1.4.1.1751.2.18.5.16.1.20 integer read-write
If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniCbrMaxCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.21 integer32 read-write
CBR category Maximum Cell Rate
                                   atmPnniCbrAvailCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.22 integer32 read-write
CBR category Available Cell Rate
                                   atmPnniCbrCellXerDelay 1.3.6.1.4.1.1751.2.18.5.16.1.23 integer32 read-write
CBR category Cell Transfer Delay
                                   atmPnniCbrCellLossRatioZero 1.3.6.1.4.1.1751.2.18.5.16.1.24 integer32 read-write
CBR category Cell Loss Ratio for CLP=0 traffic
                                   atmPnniCbrCellLossRatioZeroPlusOne 1.3.6.1.4.1.1751.2.18.5.16.1.25 integer32 read-write
CBR category Cell Loss Ratio for CLP=0+1 traffic
                                   atmPnniCbrCellDelayVar 1.3.6.1.4.1.1751.2.18.5.16.1.26 integer32 read-write
CBR category Cell Delay Variation
                                   atmPnniRtVbrServCatSupp 1.3.6.1.4.1.1751.2.18.5.16.1.27 integer read-write
If RT VBR category is supported Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniRtVbrGcacClpEqualZero 1.3.6.1.4.1.1751.2.18.5.16.1.28 integer read-write
If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniRtVbrMaxCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.29 integer32 read-write
RT VBR category Maximum Cell Rate
                                   atmPnniRtVbrAvailCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.30 integer32 read-write
RT VBR category Available Cell Rate
                                   atmPnniRtVbrCellXerDelay 1.3.6.1.4.1.1751.2.18.5.16.1.31 integer32 read-write
RT VBR category Cell Transfer Delay
                                   atmPnniRtVbrCellLossRatioZero 1.3.6.1.4.1.1751.2.18.5.16.1.32 integer32 read-write
RT VBR category Cell Loss Ratio for CLP=0 traffic
                                   atmPnniRtVbrCellLossRatioZeroPlusOne 1.3.6.1.4.1.1751.2.18.5.16.1.33 integer32 read-write
RT VBR category Cell Loss Ratio for CLP=0+1 traffic
                                   atmPnniRtVbrCellDelayVar 1.3.6.1.4.1.1751.2.18.5.16.1.34 integer32 read-write
RT VBR category Cell Delay Variation
                                   atmPnniRtVbrGcacPresent 1.3.6.1.4.1.1751.2.18.5.16.1.35 integer read-write
If RT VBR category GCAC Parameters present Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniRtVbrCellRateMargin 1.3.6.1.4.1.1751.2.18.5.16.1.36 integer read-write
RT VBR category Cell Rate Margin
                                   atmPnniRtVbrVarianceFactor 1.3.6.1.4.1.1751.2.18.5.16.1.37 integer read-write
RT VBR category Variance Factor
                                   atmPnniNrtVbrServCatSupp 1.3.6.1.4.1.1751.2.18.5.16.1.38 integer read-write
If NRT VBR category is supported Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniNrtVbrGcacClpEqualZero 1.3.6.1.4.1.1751.2.18.5.16.1.39 integer read-write
If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniNrtVbrMaxCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.40 integer32 read-write
NRT VBR category Maximum Cell Rate
                                   atmPnniNrtVbrAvailCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.41 integer32 read-write
NRT VBR category Available Cell Rate
                                   atmPnniNrtVbrCellXerDelay 1.3.6.1.4.1.1751.2.18.5.16.1.42 integer32 read-write
NRT VBR category Cell Transfer Delay
                                   atmPnniNrtVbrCellLossRatioZero 1.3.6.1.4.1.1751.2.18.5.16.1.43 integer32 read-write
NRT VBR category Cell Loss Ratio for CLP=0 traffic
                                   atmPnniNrtVbrCellLossRatioZeroPlusOne 1.3.6.1.4.1.1751.2.18.5.16.1.44 integer32 read-write
NRT VBR category Cell Loss Ratio for CLP=0+1 traffic
                                   atmPnniNrtVbrGcacPresent 1.3.6.1.4.1.1751.2.18.5.16.1.45 integer read-write
If NRT VBR category GCAC Parameters present Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniNrtVbrCellRateMargin 1.3.6.1.4.1.1751.2.18.5.16.1.46 integer read-write
NRT VBR category Cell Rate Margin
                                   atmPnniNrtVbrVarianceFactor 1.3.6.1.4.1.1751.2.18.5.16.1.47 integer read-write
NRT VBR category Variance Factor
                                   atmPnniAbrServCatSupp 1.3.6.1.4.1.1751.2.18.5.16.1.48 integer read-write
If ABR category is supported Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniAbrMaxCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.49 integer32 read-write
ABR category Maximum Cell Rate
                                   atmPnniAbrAvailCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.50 integer32 read-write
ABR category Available Cell Rate
                                   atmPnniUbrServCatSupp 1.3.6.1.4.1.1751.2.18.5.16.1.51 integer read-write
UBR category Cell Transfer Delay Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniUbrMaxCellRate 1.3.6.1.4.1.1751.2.18.5.16.1.52 integer32 read-write
NRT VBR category Cell Loss Ratio for CLP=0 traffic
                                   atmPnniOverSubscription 1.3.6.1.4.1.1751.2.18.5.16.1.53 integer read-write
Over subscription factor for PNNI Intf.
                                   atmPnniSgnlEnabled 1.3.6.1.4.1.1751.2.18.5.16.1.54 integer read-write
Indicates if atm signaling is enabled or disabled for this PNNI interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniVpiSig 1.3.6.1.4.1.1751.2.18.5.16.1.55 integer read-write
VPI value for the signalling channel for the PNNI interface.
                                   atmPnniVciSig 1.3.6.1.4.1.1751.2.18.5.16.1.56 integer read-write
VCI value for the signalling channel for the PNNI interface.
                                   atmPnniAvailBwIgr 1.3.6.1.4.1.1751.2.18.5.16.1.57 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for.
                                   atmPnniAvailBwEgr 1.3.6.1.4.1.1751.2.18.5.16.1.58 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for.
                                   atmPnniUPCSupp 1.3.6.1.4.1.1751.2.18.5.16.1.59 integer read-write
upc supp off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmPnniUbrLoadBalSupp 1.3.6.1.4.1.1751.2.18.5.16.1.60 integer read-write
load balancing supp for ubr conns off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmPnniSscopRxWndSz 1.3.6.1.4.1.1751.2.18.5.16.1.61 integer read-write
The receive window size for the SSCOP layer
                                   atmPnniRemoteSvcMinVpi 1.3.6.1.4.1.1751.2.18.5.16.1.62 integer read-only
The lower bound of the actual VPI for SVC connections.
                                   atmPnniRemoteSvcMaxVpi 1.3.6.1.4.1.1751.2.18.5.16.1.63 integer read-only
The Upper bound of the actual VPI for SVC connections.
                                   atmPnniRemoteSvcMinVci 1.3.6.1.4.1.1751.2.18.5.16.1.64 integer read-only
The lower bound of the actual VCI for SVC connections.
                                   atmPnniRemoteSvcMaxVci 1.3.6.1.4.1.1751.2.18.5.16.1.65 integer read-only
The Upper bound of the actual VCI for SVC connections.
                                   atmPnniVpiIlmi 1.3.6.1.4.1.1751.2.18.5.16.1.66 integer read-write
VPI value for the ilmi channel for the PNNI interface.
                                   atmPnniVciIlmi 1.3.6.1.4.1.1751.2.18.5.16.1.67 integer read-write
VCI value for the ilmi channel for the PNNI interface.
                                   atmPnniIlmiProtocolStatus 1.3.6.1.4.1.1751.2.18.5.16.1.68 integer read-write
The administrative status: 'enabled' - ILMI protocol enabled on PNNI 'disabled' - ILMI protocol disabled on PNNI . Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniIlmiOperStatus 1.3.6.1.4.1.1751.2.18.5.16.1.69 integer read-only
The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. Enumeration: 'outOfService': 1, 'inService': 2.
                                   atmPnniIlmiConfigProc 1.3.6.1.4.1.1751.2.18.5.16.1.70 integer read-write
ILMI Configuration Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniIlmiConnectProc 1.3.6.1.4.1.1751.2.18.5.16.1.71 integer read-write
ILMI Connectivity Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniIlmiAttachPtProc 1.3.6.1.4.1.1751.2.18.5.16.1.72 integer read-write
ILMI Attachment Point Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniIlmiSecureLinkProc 1.3.6.1.4.1.1751.2.18.5.16.1.73 integer read-write
ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniIlmiAddrRegProc 1.3.6.1.4.1.1751.2.18.5.16.1.74 integer read-write
ILMI Address Registration Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   atmPnniIlmiTimerS 1.3.6.1.4.1.1751.2.18.5.16.1.75 integer32 read-write
Timer S (secs). Used to poll peer when link is down.
                                   atmPnniIlmiTimerT 1.3.6.1.4.1.1751.2.18.5.16.1.76 integer32 read-write
Timer T (secs). Used to poll peer when link is up.
                                   atmPnniIlmiRetryK 1.3.6.1.4.1.1751.2.18.5.16.1.77 integer32 read-write
Retry K - number of timeouts of before link is declared down.
                                   atmPnniConnTrafficShapingFlag 1.3.6.1.4.1.1751.2.18.5.16.1.78 integer read-write
Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                         atmVnnConfigTable 1.3.6.1.4.1.1751.2.18.5.17 no-access
Table of atm user to network interface (UNI)
                               atmVnnConfigEntry 1.3.6.1.4.1.1751.2.18.5.17.1 no-access
Row definition of atm UNI
                                   atmVnnIfIndex 1.3.6.1.4.1.1751.2.18.5.17.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                   atmVnnAddrType 1.3.6.1.4.1.1751.2.18.5.17.1.2 integer read-write
atm address type Enumeration: 'nsap': 1, 'e164': 2, 'private': 3.
                                   atmVnnSvcMinVpi 1.3.6.1.4.1.1751.2.18.5.17.1.3 integer read-write
The lower bound of the VPI for SVC connections.
                                   atmVnnSvcMaxVpi 1.3.6.1.4.1.1751.2.18.5.17.1.4 integer read-write
The upper bound of the VPI for SVC connections.
                                   atmVnnSvcMinVci 1.3.6.1.4.1.1751.2.18.5.17.1.5 integer read-write
The lower bound of the VCI for SVC connections.
                                   atmVnnSvcMaxVci 1.3.6.1.4.1.1751.2.18.5.17.1.6 integer read-write
The upper bound of the VCI for SVC connections.
                                   atmVnnAdminStatus 1.3.6.1.4.1.1751.2.18.5.17.1.7 integer read-write
The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   atmVnnOperStatus 1.3.6.1.4.1.1751.2.18.5.17.1.8 integer read-only
The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   atmVnnOverSubscription 1.3.6.1.4.1.1751.2.18.5.17.1.9 integer read-write
Over subscription factor
                                   atmVnnNwPrefix1 1.3.6.1.4.1.1751.2.18.5.17.1.10 octet string read-only
ATM Network Prefix 1
                                   atmVnnT303 1.3.6.1.4.1.1751.2.18.5.17.1.11 integer32 read-write
Timer T303 value - seconds
                                   atmVnnT308 1.3.6.1.4.1.1751.2.18.5.17.1.12 integer32 read-write
Timer T308 value - seconds
                                   atmVnnT309 1.3.6.1.4.1.1751.2.18.5.17.1.13 integer32 read-write
Timer T309 value - seconds
                                   atmVnnT310 1.3.6.1.4.1.1751.2.18.5.17.1.14 integer32 read-write
Timer T310 value - seconds
                                   atmVnnT313 1.3.6.1.4.1.1751.2.18.5.17.1.15 integer32 read-write
Timer T313 value - User side only - seconds
                                   atmVnnT316 1.3.6.1.4.1.1751.2.18.5.17.1.16 integer32 read-write
Timer T316 value - seconds
                                   atmVnnT317 1.3.6.1.4.1.1751.2.18.5.17.1.17 integer32 read-write
Timer T317 value - seconds
                                   atmVnnT322 1.3.6.1.4.1.1751.2.18.5.17.1.18 integer32 read-write
Timer T322 value - seconds
                                   atmVnnT398 1.3.6.1.4.1.1751.2.18.5.17.1.19 integer32 read-write
Timer T398 value - seconds
                                   atmVnnT399 1.3.6.1.4.1.1751.2.18.5.17.1.20 integer32 read-write
Timer T399 value - seconds
                                   atmVnnMyNeighborIpAddress 1.3.6.1.4.1.1751.2.18.5.17.1.21 ipaddress read-write
The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration.
                                   atmVnnMyNeighborIfName 1.3.6.1.4.1.1751.2.18.5.17.1.22 displaystring read-write
The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration.
                                   atmVnnVpiSig 1.3.6.1.4.1.1751.2.18.5.17.1.23 integer read-write
VPI value for the signalling channel for the UNI interface.
                                   atmVnnVciSig 1.3.6.1.4.1.1751.2.18.5.17.1.24 integer read-write
VCI value for the signalling channel for the UNI interface.
                                   atmVnnVpiIlmi 1.3.6.1.4.1.1751.2.18.5.17.1.25 integer read-write
VPI value for the ilmi channel for the UNI interface.
                                   atmVnnVciIlmi 1.3.6.1.4.1.1751.2.18.5.17.1.26 integer read-write
VCI value for the ilmi channel for the UNI interface.
                                   atmVnnAtmSignalingStatus 1.3.6.1.4.1.1751.2.18.5.17.1.27 integer read-only
Indicates if atm signaling is enabled or disabled for this interface. Consistent with other AC interfaces Enumeration: 'enabled': 1.
                                   atmVnnMyIfName 1.3.6.1.4.1.1751.2.18.5.17.1.28 displaystring read-write
A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string.
                                   atmVnnIlmiProtocolStatus 1.3.6.1.4.1.1751.2.18.5.17.1.29 integer read-only
The administrative status: 'enabled' - ILMI protocol enabled on UNI. Enumeration: 'enabled': 1.
                                   atmVnnIlmiOperStatus 1.3.6.1.4.1.1751.2.18.5.17.1.30 integer read-only
The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. Enumeration: 'outOfService': 1, 'inService': 2.
                                   atmVnnIlmiConfigProc 1.3.6.1.4.1.1751.2.18.5.17.1.31 integer read-only
ILMI Configuration Procedure status. Enumeration: 'disabled': 2.
                                   atmVnnIlmiConnectProc 1.3.6.1.4.1.1751.2.18.5.17.1.32 integer read-only
ILMI Connectivity Procedure status. Enumeration: 'enabled': 1.
                                   atmVnnIlmiAttachPtProc 1.3.6.1.4.1.1751.2.18.5.17.1.33 integer read-only
ILMI Attachment Point Procedure status. Enumeration: 'disabled': 2.
                                   atmVnnIlmiSecureLinkProc 1.3.6.1.4.1.1751.2.18.5.17.1.34 integer read-only
ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. Enumeration: 'disabled': 2.
                                   atmVnnIlmiAddrRegProc 1.3.6.1.4.1.1751.2.18.5.17.1.35 integer read-only
ILMI Address Registration Procedure status. Enumeration: 'enabled': 1.
                                   atmVnnIlmiTimerS 1.3.6.1.4.1.1751.2.18.5.17.1.36 integer32 read-write
Timer S (secs). Used to poll peer when link is down.
                                   atmVnnIlmiTimerT 1.3.6.1.4.1.1751.2.18.5.17.1.37 integer32 read-write
Timer T (secs). Used to poll peer when link is up.
                                   atmVnnIlmiRetryK 1.3.6.1.4.1.1751.2.18.5.17.1.38 integer32 read-write
Retry K - number of timeouts before link is declared down.
                                   atmVnnAvailBwIgr 1.3.6.1.4.1.1751.2.18.5.17.1.39 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for.
                                   atmVnnAvailBwEgr 1.3.6.1.4.1.1751.2.18.5.17.1.40 integer32 read-only
The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for.
                                   atmVnnUPCSupp 1.3.6.1.4.1.1751.2.18.5.17.1.41 integer read-write
upc supp off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmVnnUbrLoadBalSupp 1.3.6.1.4.1.1751.2.18.5.17.1.42 integer read-write
load balancing supp for ubr conns off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmVnnSscopRxWndSz 1.3.6.1.4.1.1751.2.18.5.17.1.43 integer read-write
The receive window size for the SSCOP layer
                         virtualIntfConfigTable 1.3.6.1.4.1.1751.2.18.5.18 no-access
Table of Virtual Interfaces Configurations
                               virtualIntfConfigEntry 1.3.6.1.4.1.1751.2.18.5.18.1 no-access
Index is the Interface and the Virutal Interface
                                   virtualIntfConfigIf 1.3.6.1.4.1.1751.2.18.5.18.1.1 intfindex no-access
Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   virtualIntfConfigVi 1.3.6.1.4.1.1751.2.18.5.18.1.2 integer no-access
VI value. Def Val is 1 because 0 cannot be configured
                                   virtualIntfConfigCellRate 1.3.6.1.4.1.1751.2.18.5.18.1.3 integer32 read-write
Bandwidth assigned for the VI. The unit is cells per sec. Total Bandwidth of all VI's cannot exceed bandwidth of the main interface. CAC will be supported per VI.
                                   virtualIntfConfigOverSubs 1.3.6.1.4.1.1751.2.18.5.18.1.4 integer32 read-write
Over Subscription rate for VI
                                   virtualIntfConfigRowStatus 1.3.6.1.4.1.1751.2.18.5.18.1.5 rowstatus read-write
row status
                                   virtualIntfConfigUPCSupp 1.3.6.1.4.1.1751.2.18.5.18.1.6 integer read-write
virtual interface upc supp off/on If this is changed then all the connections on this interface will be replayed. Enumeration: 'disabled': 1, 'enabled': 2.
                                   virtualIntfAvailBwEgr 1.3.6.1.4.1.1751.2.18.5.18.1.7 integer32 read-only
Avail Bw for that VI in cells per sec in the Egress Direction or the direction away from back plane.
                         virtualUNIConfigTable 1.3.6.1.4.1.1751.2.18.5.19 no-access
Table of Virtual UNI Interfaces Configurations
                               virtualUNIConfigEntry 1.3.6.1.4.1.1751.2.18.5.19.1 no-access
Index is the Interface and the Virutal UNI Interface
                                   virtualUNIIfIndex 1.3.6.1.4.1.1751.2.18.5.19.1.1 intfindex no-access
This is the first index to the Virtual UNI Interface table. Interface index will be of the form SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   virtualUNIVUNIId 1.3.6.1.4.1.1751.2.18.5.19.1.2 integer no-access
Virtual UNI number, second index to access the virtual UNI interface.
                                   virtualUNIVISupport 1.3.6.1.4.1.1751.2.18.5.19.1.3 integer read-write
Virtual Interface (Traffic Shaping) is enabled or disabled on this VUNI. A Virtual Interface should already be configured befaore the traffic shaping can be enabled on this VUNI. If VISupport is disabled then all the connections on the VUNI can only be configured as UBR connections if this VUNI interface is on a VI enabled physical interface Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIMinVpi 1.3.6.1.4.1.1751.2.18.5.19.1.4 integer read-write
Lower value of the VPI range for this VUNI
                                   virtualUNIMaxVpi 1.3.6.1.4.1.1751.2.18.5.19.1.5 integer read-write
Upper value of the VPI range for this VUNI
                                   virtualUNIConfigRowStatus 1.3.6.1.4.1.1751.2.18.5.19.1.6 rowstatus read-write
row status
                                   virtualUNIAddrType 1.3.6.1.4.1.1751.2.18.5.19.1.7 integer read-write
atm address type Enumeration: 'nsap': 1, 'e164': 2, 'private': 3.
                                   virtualUNISvcMinVpi 1.3.6.1.4.1.1751.2.18.5.19.1.8 integer read-write
The lower bound of the VPI for SVC connections.
                                   virtualUNISvcMaxVpi 1.3.6.1.4.1.1751.2.18.5.19.1.9 integer read-write
The upper bound of the VPI for SVC connections.
                                   virtualUNISvcMinVci 1.3.6.1.4.1.1751.2.18.5.19.1.10 integer read-write
The lower bound of the VCI for SVC connections.
                                   virtualUNISvcMaxVci 1.3.6.1.4.1.1751.2.18.5.19.1.11 integer read-write
The upper bound of the VCI for SVC connections.
                                   virtualUNIAdminStatus 1.3.6.1.4.1.1751.2.18.5.19.1.12 integer read-write
The administrative action: 'outOfService' means take the VUNI out of service 'inService' means take the VUNI in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   virtualUNIOperStatus 1.3.6.1.4.1.1751.2.18.5.19.1.13 integer read-only
The operational status of the VUNI: 'outOfService' means the VUNI is out of service 'inService' means the VUNI is in service Enumeration: 'outOfService': 1, 'inService': 2.
                                   virtualUNINwPrefix1 1.3.6.1.4.1.1751.2.18.5.19.1.14 octet string read-write
ATM Network Prefix 1
                                   virtualUNIT303 1.3.6.1.4.1.1751.2.18.5.19.1.15 integer32 read-write
Timer T303 value - seconds
                                   virtualUNIT308 1.3.6.1.4.1.1751.2.18.5.19.1.16 integer32 read-write
Timer T308 value - seconds
                                   virtualUNIT309 1.3.6.1.4.1.1751.2.18.5.19.1.17 integer32 read-write
Timer T309 value - seconds
                                   virtualUNIT310 1.3.6.1.4.1.1751.2.18.5.19.1.18 integer32 read-write
Timer T310 value - seconds
                                   virtualUNIT313 1.3.6.1.4.1.1751.2.18.5.19.1.19 integer32 read-write
Timer T313 value - User side only - seconds
                                   virtualUNIT316 1.3.6.1.4.1.1751.2.18.5.19.1.20 integer32 read-write
Timer T316 value - seconds
                                   virtualUNIT317 1.3.6.1.4.1.1751.2.18.5.19.1.21 integer32 read-write
Timer T317 value - seconds
                                   virtualUNIT322 1.3.6.1.4.1.1751.2.18.5.19.1.22 integer32 read-write
Timer T322 value - seconds
                                   virtualUNIT398 1.3.6.1.4.1.1751.2.18.5.19.1.23 integer32 read-write
Timer T398 value - seconds
                                   virtualUNIT399 1.3.6.1.4.1.1751.2.18.5.19.1.24 integer32 read-write
Timer T399 value - seconds
                                   virtualUNIMyNeighborIpAddress 1.3.6.1.4.1.1751.2.18.5.19.1.25 ipaddress read-write
The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration.
                                   virtualUNIMyNeighborIfName 1.3.6.1.4.1.1751.2.18.5.19.1.27 displaystring read-write
The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration.
                                   virtualUNIVpiSig 1.3.6.1.4.1.1751.2.18.5.19.1.28 integer read-write
VPI value for the signalling channel for the UNI interface.
                                   virtualUNIVciSig 1.3.6.1.4.1.1751.2.18.5.19.1.29 integer read-write
VCI value for the signalling channel for the UNI interface.
                                   virtualUNISignalingAdminStatus 1.3.6.1.4.1.1751.2.18.5.19.1.30 integer read-write
Indicates if atm signaling is enabled or disabled for this VUNI interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNISignalingOperStatus 1.3.6.1.4.1.1751.2.18.5.19.1.31 integer read-only
The protocol operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service Enumeration: 'outOfService': 2, 'inService': 1.
                                   virtualUNIVpiIlmi 1.3.6.1.4.1.1751.2.18.5.19.1.32 integer read-write
VPI value for the ilmi channel for the UNI interface.
                                   virtualUNIVciIlmi 1.3.6.1.4.1.1751.2.18.5.19.1.33 integer read-write
VCI value for the ilmi channel for the UNI interface.
                                   virtualUNIMyIfName 1.3.6.1.4.1.1751.2.18.5.19.1.34 displaystring read-write
A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string.
                                   virtualUNIIlmiProtocolStatus 1.3.6.1.4.1.1751.2.18.5.19.1.35 integer read-write
The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIIlmiOperStatus 1.3.6.1.4.1.1751.2.18.5.19.1.36 integer read-only
The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. Enumeration: 'outOfService': 1, 'inService': 2.
                                   virtualUNIIlmiConfigProc 1.3.6.1.4.1.1751.2.18.5.19.1.37 integer read-write
ILMI Configuration Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIIlmiConnectProc 1.3.6.1.4.1.1751.2.18.5.19.1.38 integer read-write
ILMI Connectivity Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIIlmiAttachPtProc 1.3.6.1.4.1.1751.2.18.5.19.1.39 integer read-write
ILMI Attachment Point Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIIlmiSecureLinkProc 1.3.6.1.4.1.1751.2.18.5.19.1.40 integer read-write
ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIIlmiAddrRegProc 1.3.6.1.4.1.1751.2.18.5.19.1.41 integer read-write
ILMI Address Registration Procedure status. Enumeration: 'disabled': 2, 'enabled': 1.
                                   virtualUNIIlmiTimerS 1.3.6.1.4.1.1751.2.18.5.19.1.42 integer32 read-write
Timer S (secs). Used to poll peer when link is down.
                                   virtualUNIIlmiTimerT 1.3.6.1.4.1.1751.2.18.5.19.1.43 integer32 read-write
Timer T (secs). Used to poll peer when link is up.
                                   virtualUNIIlmiRetryK 1.3.6.1.4.1.1751.2.18.5.19.1.44 integer32 read-write
Retry K - number of timeouts before link is declared down.
                                   virtualUNIIntfType 1.3.6.1.4.1.1751.2.18.5.19.1.45 integer read-write
atm interface type Enumeration: 'user': 1, 'network': 2.
                                   virtualUNIUserAddress 1.3.6.1.4.1.1751.2.18.5.19.1.46 octet string read-write
ATM User Address
                                   virtualUNIUserAddrOrgScope 1.3.6.1.4.1.1751.2.18.5.19.1.47 integer read-write
ATM User Address Organizational scope Enumeration: 'organizationMinusOne': 7, 'global': 15, 'sitePlusOne': 6, 'intraCommunity': 11, 'regional': 13, 'intraOrganization': 8, 'localNetwork': 1, 'organizationPlusOne': 9, 'localNetworkPlusOne': 2, 'siteMinusOne': 4, 'localNetworkPlusTwo': 3, 'intraSite': 5, 'interRegional': 14, 'communityMinusOne': 10, 'communityPlusOne': 12.
                                   virtualUNISscopRxWndSz 1.3.6.1.4.1.1751.2.18.5.19.1.48 integer read-write
The receive window size for the SSCOP layer
                         casConfig 1.3.6.1.4.1.1751.2.18.5.20
                               casConfigTable 1.3.6.1.4.1.1751.2.18.5.20.1 no-access
Table for CAS trunk/line configuration.
                                   casConfigEntry 1.3.6.1.4.1.1751.2.18.5.20.1.1 no-access
Row definition for CAS trunk/line configuration.
                                       casIfIndex 1.3.6.1.4.1.1751.2.18.5.20.1.1.1 intfindex no-access
The channel ID (slot/port/channel) in SSPPCCC format associated with the CAS trunk/line.
                                       casAdminStatus 1.3.6.1.4.1.1751.2.18.5.20.1.1.2 integer read-write
The administrative action: outOfService-take the CAS trunk/line out of service, inService-take the CAS trunk/line in service, delete-remove/deconfigure the CAS trunk/line. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                       casOperStatus 1.3.6.1.4.1.1751.2.18.5.20.1.1.3 integer read-only
The operational status of the CAS trunk/line: outOfService-the CAS trunk/line is out of service, inService-the CAS trunk/line is in service. Enumeration: 'outOfService': 1, 'inService': 2.
                                       casProtocolType 1.3.6.1.4.1.1751.2.18.5.20.1.1.4 integer read-write
The type of CAS protocol to be used. The protocol must match the one used on the other end of the trunk/line. Enumeration: 'ground-start-network': 4, 'loop-start-user': 3, 'itu-t-r2': 6, 'loop-start-network': 2, 'ground-start-user': 5, 'wink-start': 1.
                                       casDirection 1.3.6.1.4.1.1751.2.18.5.20.1.1.5 integer read-write
The direction of traffic flow on this CAS trunk/line. Enumeration: 'both': 1, 'outgoing': 3, 'incoming': 2.
                                       casAddressingType 1.3.6.1.4.1.1751.2.18.5.20.1.1.6 integer read-write
The addressing type used for the CAS trunk/line. dtmf -- dual tone multifrequency r1-mf -- R1 multifrequency, r2-mf -- R2 multifrequency. Type of 're-mf' is valid only when casProtocolType is 'wink start', while 'r2-mf' is valid only when casProtocolType is 'itu-t r2' . Enumeration: 'r2-mf': 3, 'r1-mf': 2, 'dtmf': 1.
                                       casBitPatternType 1.3.6.1.4.1.1751.2.18.5.20.1.1.7 integer read-only
The type of bit pattern used for supervisory signaling. The value is AB when SF framing is used, ABCD when ESF framing is used for DS1. In case of E1, the value is always ABCD. Enumeration: 'abcd': 2, 'ab': 1.
                                       casGroupId 1.3.6.1.4.1.1751.2.18.5.20.1.1.8 integer read-write
The identifier to associate a group of CAS trunks/lines which have same reachability. When SG is disabled, it must be specified with a non-zero value. When SG is enabled, the value should be set to zero which indicate no routing performed based on the value.
                         toneAnnceConfigTable 1.3.6.1.4.1.1751.2.18.5.21 no-access
Table for the Tone Announcement Interface
                               toneAnnceConfigEntry 1.3.6.1.4.1.1751.2.18.5.21.1 no-access
Row definition for Tone Announcement interface
                                   toneAnnceIfIndex 1.3.6.1.4.1.1751.2.18.5.21.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                   toneAnnceAdminStatus 1.3.6.1.4.1.1751.2.18.5.21.1.2 integer read-write
The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure the interface. Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                   toneAnnceOperStatus 1.3.6.1.4.1.1751.2.18.5.21.1.3 integer read-only
The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service Enumeration: 'outOfService': 1, 'inService': 2.
                         gr303IntfConfig 1.3.6.1.4.1.1751.2.18.5.22
                               gr303IntfConfigTable 1.3.6.1.4.1.1751.2.18.5.22.1 no-access
Table of GR303 interface configuration attributes
                                   gr303IntfConfigEntry 1.3.6.1.4.1.1751.2.18.5.22.1.1 no-access
Row definition for GR303 interface configuration table
                                       gr303IntfId 1.3.6.1.4.1.1751.2.18.5.22.1.1.1 integer32 no-access
Interface ID (SSPPCCC)
                                       gr303TMCChannelId 1.3.6.1.4.1.1751.2.18.5.22.1.1.2 integer32 read-write
TMC-Channel Number. If TMC Channel is set to 0 there will be no TMC channel on the corresponding DS1. Generally the TMC channel should be specified on the one of the DS1's in a GR303 interface group and should be on DS0 no. 24
                                       gr303EOCChannelId 1.3.6.1.4.1.1751.2.18.5.22.1.1.3 integer32 read-write
EOC-Channel Number. If EOC Channel is set to 0 there will be no EOC channel on the corresponding DS1. Generally the TMC channel should be specified on the one of the DS1's in a GR303 interface group and should be on DS0 no. 12
                                       gr303IntfAdminStatus 1.3.6.1.4.1.1751.2.18.5.22.1.1.4 integer read-write
GR303 interface admin status Enumeration: 'outOfService': 1, 'delete': 3, 'inService': 2.
                                       gr303IntfOperStatus 1.3.6.1.4.1.1751.2.18.5.22.1.1.5 integer read-write
GR303 interface operational status Enumeration: 'outOfService': 1, 'inService': 2.
                               gr303Ds0ChanConfigTable 1.3.6.1.4.1.1751.2.18.5.22.2 no-access
Table of GR303 DS0 Channel configuration attriburtes
                                   gr303Ds0ChanConfigEntry 1.3.6.1.4.1.1751.2.18.5.22.2.1 no-access
Row definition for GR303 DS0 Channel configuration table
                                       gr303Ds0ChanId 1.3.6.1.4.1.1751.2.18.5.22.2.1.1 integer32 no-access
GR303 DS0 Chan ID (SSPPCCC)
                                       gr303Ds0ChanAdminStatus 1.3.6.1.4.1.1751.2.18.5.22.2.1.2 integer read-write
GR303 Ds0 Chan admin status Enumeration: 'outOfService': 1, 'inService': 2.
                                       gr303Ds0ChanOperStatus 1.3.6.1.4.1.1751.2.18.5.22.2.1.3 integer read-write
GR303 Ds0 Chan operational status Enumeration: 'outOfService': 1, 'inService': 2.
                     connectionConfig 1.3.6.1.4.1.1751.2.18.6
                         atmPvcVccTable 1.3.6.1.4.1.1751.2.18.6.1 no-access
Table of PVC atm virtual channel connections
                             atmPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.1.1 no-access
Row definition of atm PVC VCC connections
                                 atmPvcVccIfA 1.3.6.1.4.1.1751.2.18.6.1.1.1 intfindex no-access
Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 atmPvcVccVpiA 1.3.6.1.4.1.1751.2.18.6.1.1.2 integer no-access
VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095.
                                 atmPvcVccVciA 1.3.6.1.4.1.1751.2.18.6.1.1.3 integer no-access
VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535.
                                 atmPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.1.1.4 intfindex no-access
Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 atmPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.1.1.5 integer no-access
VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095.
                                 atmPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.1.1.6 integer no-access
VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535.
                                 atmPvcVccServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.1.1.7 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'gfr2': 11, 'vbr-express': 6.
                                 atmPvcVccSarTypeA2B 1.3.6.1.4.1.1751.2.18.6.1.1.8 integer read-write
SAR type used in atm adaption Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                 atmPvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.1.1.10 integer32 read-write
peak cell rate - side A, in cell per second
                                 atmPvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.1.1.11 integer32 read-write
sustained rate - side A, in cell per second
                                 atmPvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.1.1.12 integer32 read-write
maximum burst size - side A, in cells
                                 atmPvcVccServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.1.1.13 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'gfr2': 11, 'vbr-express': 6.
                                 atmPvcVccSarTypeB2A 1.3.6.1.4.1.1751.2.18.6.1.1.14 integer read-write
sar type used in atm adaption Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                 atmPvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.1.1.16 integer32 read-write
peak rate - side B, in cell per second.
                                 atmPvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.1.1.17 integer32 read-write
sustained rate - side B, in cell per second.
                                 atmPvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.1.1.18 integer32 read-write
maximum burst size - side B, in cells.
                                 atmPvcVccType 1.3.6.1.4.1.1751.2.18.6.1.1.20 integer read-write
type of connection Enumeration: 'secured': 2, 'nonsecured': 1.
                                 atmPvcVccFlow 1.3.6.1.4.1.1751.2.18.6.1.1.21 integer read-write
type of flow Enumeration: 'duplex': 1, 'simplexA2B': 2, 'pointToMultipointA2B': 3.
                                 atmPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.1.1.22 rowstatus read-write
row status
                                 atmPvcVccFrwdErrCorrectionA2B 1.3.6.1.4.1.1751.2.18.6.1.1.23 integer read-write
Forward error correction scheme Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                 atmPvcVccFrwdErrCorrectionB2A 1.3.6.1.4.1.1751.2.18.6.1.1.24 integer read-write
Forward error correction scheme Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                 atmPvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.1.1.25 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 atmPvcVccOamStatus 1.3.6.1.4.1.1751.2.18.6.1.1.26 integer read-write
Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Seg-Pt: A side is only a segment point, therefore it will only respond to maintenance OAM cells and not fault cells. End-Seg-Pt: A side is both an end point and a segment point. Intermediate-Pt: It will only generate AIS during local failure. For ATM-to-ATM connections the OAM status will be symmetric on both sides of the connection. Enumeration: 'intermediate-Pt': 5, 'intra-Segment-Pt': 6, 'end-Seg-Pt': 4, 'seg-Pt': 3, 'end-Pt': 2, 'unsupp': 1.
                                 atmPvcVccDualHomed 1.3.6.1.4.1.1751.2.18.6.1.1.27 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                 atmPvcVccViA 1.3.6.1.4.1.1751.2.18.6.1.1.28 integer read-write
VI to associate the Egress part of the B2A connection .
                                 atmPvcVccViB 1.3.6.1.4.1.1751.2.18.6.1.1.29 integer read-write
VI to associate the Egress part of the A2B connection .
                                 atmPvcVccCnfrmTypeA2B 1.3.6.1.4.1.1751.2.18.6.1.1.30 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one_bucket_notag_0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two_bucket_notag_0plus1_0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two_bucket_notag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two_bucket_tag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best_effort_tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 atmPvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.1.1.31 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one_bucket_notag_0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two_bucket_notag_0plus1_0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two_bucket_notag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two_bucket_tag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best_effort_tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 atmPvcVccVUNIA 1.3.6.1.4.1.1751.2.18.6.1.1.32 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                 atmPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.1.1.33 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 atmPvcVccOamStatusB 1.3.6.1.4.1.1751.2.18.6.1.1.34 integer read-write
Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows. Enumeration: 'intermediate-Pt': 5, 'intra-Segment-Pt': 6, 'end-Seg-Pt': 4, 'seg-Pt': 3, 'end-Pt': 2, 'unsupp': 1.
                                 atmPvcVccOAMConnEndPtStatusA 1.3.6.1.4.1.1751.2.18.6.1.1.35 integer read-only
Connection endpoint side A status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 atmPvcVccOAMConnEndPtStatusB 1.3.6.1.4.1.1751.2.18.6.1.1.36 integer read-only
Connection endpoint side B status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 atmPvcVccOAMConnSegEndPtStatusA 1.3.6.1.4.1.1751.2.18.6.1.1.37 integer read-only
Segment endpoint side A status. Valid only at segment endpoints. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 atmPvcVccOAMConnSegEndPtStatusB 1.3.6.1.4.1.1751.2.18.6.1.1.38 integer read-only
Segment endpoint side B status. Valid only at segment endpoints. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 atmPvcVccMfsA2B 1.3.6.1.4.1.1751.2.18.6.1.1.39 integer read-write
Maximum Frame Size for GFR traffic for A2B dir
                                 atmPvcVccMfsB2A 1.3.6.1.4.1.1751.2.18.6.1.1.40 integer read-write
Maximum Frame Size for GFR traffic for B2A dir
                                 atmPvcVccConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.1.1.41 atmconnfailurecause read-only
connestion status reason code
                                 atmPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.1.1.42 atmconnfailurecause read-only
connection status reason code
                                 atmPvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.1.1.43 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmPvcVccTrafficShapingB2A 1.3.6.1.4.1.1751.2.18.6.1.1.44 integer read-write
Traffic Shaping Support in the B2A direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         atmPvcVpcTable 1.3.6.1.4.1.1751.2.18.6.2 no-access
Table of PVC atm virtual path connections
                             atmPvcVpcEntry 1.3.6.1.4.1.1751.2.18.6.2.1 no-access
Row definition of atm connections
                                 atmPvcVpcIfA 1.3.6.1.4.1.1751.2.18.6.2.1.1 intfindex no-access
Interface index for side A of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 atmPvcVpcVpiA 1.3.6.1.4.1.1751.2.18.6.2.1.2 integer no-access
VPI value for side A of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095.
                                 atmPvcVpcIfB 1.3.6.1.4.1.1751.2.18.6.2.1.3 intfindex no-access
Interface index for side B of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 atmPvcVpcVpiB 1.3.6.1.4.1.1751.2.18.6.2.1.4 integer no-access
VPI value for side B of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095.
                                 atmPvcVpcServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.2.1.5 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                 atmPvcVpcSarTypeA2B 1.3.6.1.4.1.1751.2.18.6.2.1.6 integer read-write
SAR Type Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                 atmPvcVpcPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.2.1.8 integer32 read-write
peak rate - side A, in cell per second.
                                 atmPvcVpcSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.2.1.9 integer32 read-write
sustained rate - side A, in cell per second.
                                 atmPvcVpcMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.2.1.10 integer32 read-write
maximum burst size - side A, in cell per second.
                                 atmPvcVpcServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.2.1.11 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                 atmPvcVpcSarTypeB2A 1.3.6.1.4.1.1751.2.18.6.2.1.12 integer read-write
SAR Type Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                 atmPvcVpcPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.2.1.14 integer32 read-write
peak rate - side B, in cell per second.
                                 atmPvcVpcSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.2.1.15 integer32 read-write
sustained rate - side B, in cell per second.
                                 atmPvcVpcMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.2.1.16 integer32 read-write
maximum burst size - side B, in cell per second.
                                 atmPvcVpcType 1.3.6.1.4.1.1751.2.18.6.2.1.17 integer read-write
security feature type Enumeration: 'secured': 2, 'nonsecured': 1.
                                 atmPvcVpcFlow 1.3.6.1.4.1.1751.2.18.6.2.1.18 integer read-write
flow type Enumeration: 'duplex': 1, 'simplexA2B': 2, 'pointToMultipointA2B': 3.
                                 atmPvcVpcRowStatus 1.3.6.1.4.1.1751.2.18.6.2.1.19 rowstatus read-write
row status
                                 atmPvcVpcConnectionStatus 1.3.6.1.4.1.1751.2.18.6.2.1.20 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 atmPvcVpcOamStatus 1.3.6.1.4.1.1751.2.18.6.2.1.21 integer read-write
Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Seg-Pt: A side is only a segment point, therefore it will only respond to maintenance OAM cells and not fault cells. End-Seg-Pt: A side is both an end point and a segment point. Intermediate-Pt: It will only generate AIS during local failure. For ATM-to-ATM connections the OAM status will be symmetric on both sides of the connection. Enumeration: 'intermediate-Pt': 5, 'intra-Segment-Pt': 6, 'end-Seg-Pt': 4, 'seg-Pt': 3, 'end-Pt': 2, 'unsupp': 1.
                                 atmPvcVpcDualHomed 1.3.6.1.4.1.1751.2.18.6.2.1.22 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                 atmPvcVpcViA 1.3.6.1.4.1.1751.2.18.6.2.1.23 integer read-write
VI to associate the Egress part of the B2A connection .
                                 atmPvcVpcViB 1.3.6.1.4.1.1751.2.18.6.2.1.24 integer read-write
VI to associate the Egress part of the A2B connection .
                                 atmPvcVpcCnfrmTypeA2B 1.3.6.1.4.1.1751.2.18.6.2.1.25 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 atmPvcVpcCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.2.1.26 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 atmPvcVpcVUNIA 1.3.6.1.4.1.1751.2.18.6.2.1.27 integer read-write
VUNI Id to associate the Egress part of the B2A connection .
                                 atmPvcVpcVUNIB 1.3.6.1.4.1.1751.2.18.6.2.1.28 integer read-write
VUNI Id to associate the Egress part of the A2B connection .
                                 atmPvcVpcOamStatusB 1.3.6.1.4.1.1751.2.18.6.2.1.29 integer read-write
Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows. Enumeration: 'intermediate-Pt': 5, 'intra-Segment-Pt': 6, 'end-Seg-Pt': 4, 'seg-Pt': 3, 'end-Pt': 2, 'unsupp': 1.
                                 atmPvcVpcOAMConnEndPtStatusA 1.3.6.1.4.1.1751.2.18.6.2.1.30 integer read-only
Connection endpoint side A status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 atmPvcVpcOAMConnEndPtStatusB 1.3.6.1.4.1.1751.2.18.6.2.1.31 integer read-only
Connection endpoint side B status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 atmPvcVpcOAMConnSegEndPtStatusA 1.3.6.1.4.1.1751.2.18.6.2.1.32 integer read-only
Segment endpoint side A status. Valid only at segment/connection endpoints. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 atmPvcVpcOAMConnSegEndPtStatusB 1.3.6.1.4.1.1751.2.18.6.2.1.33 integer read-only
Segment endpoint side B status. Valid only at segment/connection endpoints. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 atmPvcVpcConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.2.1.34 atmconnfailurecause read-only
connestion status reason code
                                 atmPvcVpcConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.2.1.35 atmconnfailurecause read-only
connection status reason code
                                 atmPvcVpcTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.2.1.36 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmPvcVpcTrafficShapingB2A 1.3.6.1.4.1.1751.2.18.6.2.1.37 integer read-write
Traffic Shaping Support in the B2A direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         atmSvcVccTable 1.3.6.1.4.1.1751.2.18.6.3 no-access
Table of atm connections
                             atmSvcVccEntry 1.3.6.1.4.1.1751.2.18.6.3.1 no-access
Row definition of atm connections
                                 atmSvcVccIfA 1.3.6.1.4.1.1751.2.18.6.3.1.1 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 atmSvcVccVpiA 1.3.6.1.4.1.1751.2.18.6.3.1.2 integer no-access
atm path identifier - side A
                                 atmSvcVccVciA 1.3.6.1.4.1.1751.2.18.6.3.1.3 integer no-access
atm channel identifier - side A
                                 atmSvcVccIfB 1.3.6.1.4.1.1751.2.18.6.3.1.4 intfindex no-access
interface index (slot/port/channel) SSPPCCC
                                 atmSvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.3.1.5 integer no-access
atm path identifier - side B
                                 atmSvcVccVciB 1.3.6.1.4.1.1751.2.18.6.3.1.6 integer no-access
atm channel identifier - side B
                                 atmSvcVccServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.3.1.7 integer read-only
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                 atmSvcVccSarTypeA2B 1.3.6.1.4.1.1751.2.18.6.3.1.8 integer read-only
sar type - A to B direction Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                 atmSvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.3.1.10 integer32 read-only
peak rate - side A
                                 atmSvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.3.1.11 integer32 read-only
sustained rate - side A
                                 atmSvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.3.1.12 integer32 read-only
maximum burst size - side A
                                 atmSvcVccServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.3.1.13 integer read-only
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                 atmSvcVccSarTypeB2A 1.3.6.1.4.1.1751.2.18.6.3.1.14 integer read-only
sar type - B to A direction Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                 atmSvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.3.1.16 integer32 read-only
peak rate - side B
                                 atmSvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.3.1.17 integer32 read-only
sustained rate - side B
                                 atmSvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.3.1.18 integer32 read-only
maximum burst size - side B
                                 atmSvcVccFlow 1.3.6.1.4.1.1751.2.18.6.3.1.19 integer read-only
flow type Enumeration: 'duplex': 1, 'pointToMultipoint': 2.
                                 atmSvcVccType 1.3.6.1.4.1.1751.2.18.6.3.1.20 integer read-only
type of connection Enumeration: 'secured': 2, 'nonsecured': 1.
                                 atmSvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.3.1.21 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 atmSvcVccViA 1.3.6.1.4.1.1751.2.18.6.3.1.22 integer read-write
VI to associate the Egress part of the B2A connection .
                                 atmSvcVccViB 1.3.6.1.4.1.1751.2.18.6.3.1.23 integer read-write
VI to associate the Egress part of the A2B connection .
                                 atmSvcVccCnfrmTypeA2B 1.3.6.1.4.1.1751.2.18.6.3.1.24 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 atmSvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.3.1.25 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 atmSvcVccVUNIA 1.3.6.1.4.1.1751.2.18.6.3.1.26 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                 atmSvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.3.1.27 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 atmSvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.3.1.28 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                 atmSvcVccTrafficShapingB2A 1.3.6.1.4.1.1751.2.18.6.3.1.29 integer read-write
Traffic Shaping Support in the B2A direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         ipAtmAppPvcVccTable 1.3.6.1.4.1.1751.2.18.6.4 no-access
Table about in-band management atm connection entries.
                             ipAtmAppPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.4.1 no-access
Row definition of in-band management atm connection attribution.
                                 ipAtmAppPvcVccDestAddrA 1.3.6.1.4.1.1751.2.18.6.4.1.1 ipaddress no-access
Destination IP address of an in-band management- atm connection. Value is and IP address.
                                 ipAtmAppPvcVccSubnetMaskA 1.3.6.1.4.1.1751.2.18.6.4.1.2 ipaddress no-access
The subnet mask of the destination IP address. Value is an IP address.
                                 ipAtmAppPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.4.1.3 integer32 no-access
Interface index for side B, the atm side, of an in-band management-atm connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 ipAtmAppPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.4.1.4 integer no-access
VPI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 4095.
                                 ipAtmAppPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.4.1.5 integer no-access
VCI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 65535.
                                 ipAtmAppPvcVccServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.4.1.6 integer read-write
Service type from side A to B Enumeration: 'vbr-express': 2, 'ubr': 1.
                                 ipAtmAppPvcVccServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.4.1.7 integer read-write
Service type from side B to A Enumeration: 'vbr-express': 2, 'ubr': 1, 'gfr2': 3.
                                 ipAtmAppPvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.4.1.8 integer32 read-write
peak rate - side B
                                 ipAtmAppPvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.4.1.9 integer32 read-write
sustained rate - side B
                                 ipAtmAppPvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.4.1.10 integer32 read-write
maximum burst size - side B
                                 ipAtmAppPvcVccType 1.3.6.1.4.1.1751.2.18.6.4.1.11 integer read-only
Indicated in-band management atm connection type. Enumeration: 'backup': 1, 'primary': 0.
                                 ipAtmAppPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.4.1.12 rowstatus read-write
row status
                                 ipAtmAppPvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.4.1.13 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 ipAtmAppPvcVccDualHomed 1.3.6.1.4.1.1751.2.18.6.4.1.14 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                 ipAtmAppPvcVccViB 1.3.6.1.4.1.1751.2.18.6.4.1.15 integer read-write
VI to associate the Egress part of the A2B connection .
                                 ipAtmAppPvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.4.1.16 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 ipAtmAppPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.4.1.17 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 ipAtmAppPvcVccMfsB2A 1.3.6.1.4.1.1751.2.18.6.4.1.18 integer read-write
Maximum Frame Size for GFR traffic
                                 ipAtmAppPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.4.1.19 atmconnfailurecause read-only
connection status reason code
                                 ipAtmAppPvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.4.1.20 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                 ipAtmAppPvcVccOamStatus 1.3.6.1.4.1.1751.2.18.6.4.1.21 integer read-write
Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                         ipAtmAppSvcVccTable 1.3.6.1.4.1.1751.2.18.6.5 no-access
Table of SVC VCC connection entries
                             ipAtmAppSvcVccEntry 1.3.6.1.4.1.1751.2.18.6.5.1 no-access
Row definition of SVC VCC connection attribution.
                                 ipAtmAppSvcVccDestAddrA 1.3.6.1.4.1.1751.2.18.6.5.1.1 ipaddress no-access
Destination IP address,value is IP address.
                                 ipAtmAppSvcVccSubnetMaskA 1.3.6.1.4.1.1751.2.18.6.5.1.2 ipaddress no-access
The subnet mask of the destination IP address. Value is an IP address.
                                 ipAtmAppSvcVccIfB 1.3.6.1.4.1.1751.2.18.6.5.1.3 integer32 no-access
interface index (slot/port/channel) SSPPCCC
                                 ipAtmAppSvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.5.1.4 integer no-access
atm path identifier - side B
                                 ipAtmAppSvcVccVciB 1.3.6.1.4.1.1751.2.18.6.5.1.5 integer no-access
atm channel identifier - side B
                                 ipAtmAppSvcVccServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.5.1.6 integer read-only
Service type from side A to B. Enumeration: 'vbr-express': 2, 'ubr': 1.
                                 ipAtmAppSvcVccServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.5.1.7 integer read-only
Service type from side B to A. Enumeration: 'vbr-express': 2, 'ubr': 1.
                                 ipAtmAppSvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.5.1.8 integer32 read-only
peak rate - side B
                                 ipAtmAppSvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.5.1.9 integer32 read-only
sustained rate - side B
                                 ipAtmAppSvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.5.1.10 integer32 read-only
maximum burst size - side B
                                 ipAtmAppSvcVccType 1.3.6.1.4.1.1751.2.18.6.5.1.11 integer read-only
Type of using SVC VCC connection. Enumeration: 'backup': 1, 'primary': 0.
                                 ipAtmAppSvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.5.1.12 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 ipAtmAppSvcVccViB 1.3.6.1.4.1.1751.2.18.6.5.1.13 integer read-write
VI to associate the Egress part of the A2B connection .
                                 ipAtmAppSvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.5.1.14 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 ipAtmAppSvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.5.1.15 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 ipAtmAppSvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.5.1.16 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         cirEmAtmPvcVccTable 1.3.6.1.4.1.1751.2.18.6.6 no-access
Table of Circuit Emulation to ATM VCCs
                             cirEmAtmPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.6.1 no-access
Row definition of circuit emulation to atm connections.
                                 cirEmAtmPvcVccIfA 1.3.6.1.4.1.1751.2.18.6.6.1.1 intfindex no-access
Interface index for side A, the circuit emulation side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 cirEmAtmPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.6.1.2 intfindex no-access
Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 cirEmAtmPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.6.1.3 integer no-access
VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095.
                                 cirEmAtmPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.6.1.4 integer no-access
VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535.
                                 cirEmAtmPvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.6.1.5 integer read-write
service type Enumeration: 'cbr-1': 1, 'cbr-3': 3, 'cbr-2': 2, 'cbr-4': 4.
                                 cirEmAtmPvcVccVoiceCompressionA2B 1.3.6.1.4.1.1751.2.18.6.6.1.6 integer read-write
Voice Compression Algorithm Enumeration: 'none': 1, 'g729a-8k': 6, 'g726-40k': 5, 'g726-32k': 4, 'g726-16k': 2, 'g726-24k': 3.
                                 cirEmAtmPvcVccSilenceDetectionA2B 1.3.6.1.4.1.1751.2.18.6.6.1.7 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 cirEmAtmPvcVccEchoCancellationA2B 1.3.6.1.4.1.1751.2.18.6.6.1.8 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                 cirEmAtmPvcVccFlow 1.3.6.1.4.1.1751.2.18.6.6.1.9 integer read-write
Flow Type Enumeration: 'duplex': 1, 'simplexB2A': 3, 'pointToMultipointB2A': 5, 'simplexA2B': 2, 'pointToMultipointA2B': 4.
                                 cirEmAtmPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.6.1.10 rowstatus read-write
row status
                                 cirEmAtmPvcVccCngToneDetectionA2B 1.3.6.1.4.1.1751.2.18.6.6.1.11 integer read-write
Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is to allow detection of fax Calling Tones. In faxRelay Mode only Fax calling tone is detected . In fxRlyMdmBypass faxRelay is detected and Modem is done in bypass mode Enumeration: 'disabled': 1, 'faxRelay': 4, 'fxRlyMdmBypass': 5, 'bypass': 2, 'g726-32k': 3.
                                 cirEmAtmPvcVccCodingTranslationA2B 1.3.6.1.4.1.1751.2.18.6.6.1.12 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                 cirEmAtmPvcVccVoiceCompressionB2A 1.3.6.1.4.1.1751.2.18.6.6.1.13 integer read-write
Voice Compression Algorithm Enumeration: 'none': 1, 'g729a-8k': 6, 'g726-40k': 5, 'g726-32k': 4, 'g726-16k': 2, 'g726-24k': 3.
                                 cirEmAtmPvcVccSilenceDetectionB2A 1.3.6.1.4.1.1751.2.18.6.6.1.14 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                 cirEmAtmPvcVccEchoCancellationB2A 1.3.6.1.4.1.1751.2.18.6.6.1.15 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                 cirEmAtmPvcVccCngToneDetectionB2A 1.3.6.1.4.1.1751.2.18.6.6.1.16 integer read-write
Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is to allow detection of fax Calling Tones. In faxRelay Mode only Fax calling tone is detected . In fxRlyMdmBypass faxRelay is detected and Modem is done in bypass mode Enumeration: 'disabled': 1, 'faxRelay': 4, 'fxRlyMdmBypass': 5, 'bypass': 2, 'g726-32k': 3.
                                 cirEmAtmPvcVccCodingTranslationB2A 1.3.6.1.4.1.1751.2.18.6.6.1.17 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                 cirEmAtmPvcVccSarTypeB 1.3.6.1.4.1.1751.2.18.6.6.1.18 integer read-write
This field will only be used when selecting voice compression, in other cases it will be set to aal1. Enumeration: 'aal2': 3, 'aal2Std': 5, 'aal1': 4.
                                 cirEmAtmPvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.6.1.19 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 cirEmAtmPvcVccDualHomed 1.3.6.1.4.1.1751.2.18.6.6.1.20 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                 cirEmAtmPvcVccOamStatus 1.3.6.1.4.1.1751.2.18.6.6.1.21 integer read-write
Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                                 cirEmAtmPvcVccViB 1.3.6.1.4.1.1751.2.18.6.6.1.22 integer read-write
VI to associate the Egress part of the A2B connection .
                                 cirEmAtmPvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.6.1.23 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 cirEmAtmPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.6.1.24 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 cirEmAtmPvcVccAal2Cid 1.3.6.1.4.1.1751.2.18.6.6.1.25 integer read-write
Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2.
                                 cirEmAtmPvcVccOAMConnEndPtStatus 1.3.6.1.4.1.1751.2.18.6.6.1.26 integer read-only
Connection endpoint status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 cirEmAtmPvcVccOAMConnSegEndPtStatus 1.3.6.1.4.1.1751.2.18.6.6.1.27 integer read-only
Segment endpoint status. Valid only at segment/connection endpoints. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 cirEmAtmPvcVccConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.6.1.28 connfailurecause read-only
connestion status reason code
                                 cirEmAtmPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.6.1.29 atmconnfailurecause read-only
connection status reason code
                                 cirEmAtmPvcVccDigitCollectTypeA2B 1.3.6.1.4.1.1751.2.18.6.6.1.30 integer read-write
Identify the digital tone setting. dtmf -- dual tone multifrequency dialed digits, mf -- multifrequency dialed digits, mf-r2-frwd -- R2 multifrequency forward dialed digits. mf-r2-bkwd-- R2 multifrequency backward dialed digits Enumeration: 'mf-r2-frwd': 4, 'none': 1, 'mf': 3, 'dtmf': 2, 'mf-r2-bkwd': 5.
                                 cirEmAtmPvcVccDigitCollectTypeB2A 1.3.6.1.4.1.1751.2.18.6.6.1.31 integer read-write
Identify the digital tone setting. dtmf -- dual tone multifrequency dialed digits, mf -- multifrequency dialed digits, mf-r2-frwd -- R2 multifrequency forward dialed digits. mf-r2-bkwd-- R2 multifrequency backward dialed digits Enumeration: 'mf-r2-frwd': 4, 'none': 1, 'mf': 3, 'dtmf': 2, 'mf-r2-bkwd': 5.
                                 cirEmAtmPvcVccEncodingStdA2B 1.3.6.1.4.1.1751.2.18.6.6.1.32 integer read-write
These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. Enumeration: 'atmForum': 2, 'user': 1, 'itu-t': 3.
                                 cirEmAtmPvcVccEncodingStdB2A 1.3.6.1.4.1.1751.2.18.6.6.1.33 integer read-write
These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. Enumeration: 'atmForum': 2, 'user': 1, 'itu-t': 3.
                                 cirEmAtmPvcVccEncodingProfileIdA2B 1.3.6.1.4.1.1751.2.18.6.6.1.34 integer read-write
These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2.
                                 cirEmAtmPvcVccEncodingProfileIdB2A 1.3.6.1.4.1.1751.2.18.6.6.1.35 integer read-write
These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2.
                         frAtmPvcVccTable 1.3.6.1.4.1.1751.2.18.6.7 no-access
Table of frame relay to ATM IWF connections
                             frAtmPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.7.1 no-access
Row definition of frame relay to ATM IWF connections
                                 frAtmPvcVccIfA 1.3.6.1.4.1.1751.2.18.6.7.1.1 intfindex no-access
Interface index for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 frAtmPvcVccDlciA 1.3.6.1.4.1.1751.2.18.6.7.1.2 integer32 no-access
DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 1023.
                                 frAtmPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.7.1.3 intfindex no-access
Interface index for side B, the atm side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 frAtmPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.7.1.4 integer no-access
VPI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 4095.
                                 frAtmPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.7.1.5 integer no-access
VCI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 65535.
                                 frAtmPvcVccMaxFrameSizeIn 1.3.6.1.4.1.1751.2.18.6.7.1.6 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI).
                                 frAtmPvcVccBcIn 1.3.6.1.4.1.1751.2.18.6.7.1.7 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI).
                                 frAtmPvcVccBeIn 1.3.6.1.4.1.1751.2.18.6.7.1.8 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI).
                                 frAtmPvcVccCirIn 1.3.6.1.4.1.1751.2.18.6.7.1.9 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into the frame relay UNI).
                                 frAtmPvcVccMaxFrameSizeOut 1.3.6.1.4.1.1751.2.18.6.7.1.10 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this PVC in the egress direction (out of the frame relay UNI).
                                 frAtmPvcVccBcOut 1.3.6.1.4.1.1751.2.18.6.7.1.11 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI).
                                 frAtmPvcVccBeOut 1.3.6.1.4.1.1751.2.18.6.7.1.12 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI)
                                 frAtmPvcVccCirOut 1.3.6.1.4.1.1751.2.18.6.7.1.13 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the egress direction (into the frame relay UNI).
                                 frAtmPvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.7.1.14 integer read-write
service type, Frame relay traffic is carried by VBR type of service only. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'gfr2': 7, 'vbr-express': 6.
                                 frAtmPvcVccFlow 1.3.6.1.4.1.1751.2.18.6.7.1.15 integer read-write
Flow Type Enumeration: 'duplex': 1, 'simplexB2A': 3, 'simplexA2B': 2.
                                 frAtmPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.7.1.16 rowstatus read-write
row status
                                 frAtmPvcVccTimeLenIn 1.3.6.1.4.1.1751.2.18.6.7.1.17 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                 frAtmPvcVccInterWorkingFuncIn 1.3.6.1.4.1.1751.2.18.6.7.1.18 integer read-write
InterWorking function. Enumeration: 'frf8-Transl': 1, 'frf5': 3, 'frf8-Pass': 2.
                                 frAtmPvcVccTimeLenOut 1.3.6.1.4.1.1751.2.18.6.7.1.19 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                 frAtmPvcVccInterWorkingFuncOut 1.3.6.1.4.1.1751.2.18.6.7.1.20 integer read-write
InterWorking function. Enumeration: 'frf8-Transl': 1, 'frf5': 3, 'frf8-Pass': 2.
                                 frAtmPvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.7.1.21 integer32 read-only
Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frAtmPvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.7.1.22 integer32 read-only
Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frAtmPvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.7.1.23 integer32 read-only
Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms.
                                 frAtmPvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.7.1.24 integer32 read-only
Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frAtmPvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.7.1.25 integer32 read-only
Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frAtmPvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.7.1.26 integer32 read-only
Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms.
                                 frAtmPvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.7.1.27 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 frAtmPvcVccDualHomed 1.3.6.1.4.1.1751.2.18.6.7.1.28 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                 frAtmPvcVccOamStatus 1.3.6.1.4.1.1751.2.18.6.7.1.29 integer read-write
Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                                 frAtmPvcVccViB 1.3.6.1.4.1.1751.2.18.6.7.1.30 integer read-write
VI to associate the Egress part of the A2B connection .
                                 frAtmPvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.7.1.31 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 frAtmPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.7.1.32 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 frAtmPvcVccOAMConnEndPtStatus 1.3.6.1.4.1.1751.2.18.6.7.1.33 integer read-only
Connection endpoint status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 frAtmPvcVccOAMSegEndPtStatus 1.3.6.1.4.1.1751.2.18.6.7.1.34 integer read-only
Segment endpoint status. Valid only at segment/connection endpoint. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 frAtmPvcVccMfsB2A 1.3.6.1.4.1.1751.2.18.6.7.1.35 integer read-write
Maximum Frame Size for GFR traffic
                                 frAtmPvcVccConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.7.1.36 frconnfailurecause read-only
connestion status reason code
                                 frAtmPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.7.1.37 atmconnfailurecause read-only
connection status reason code
                                 frAtmPvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.7.1.38 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         frFrPvcTable 1.3.6.1.4.1.1751.2.18.6.8 no-access
Table of frame relay to frame relay connections
                             frFrPvcEntry 1.3.6.1.4.1.1751.2.18.6.8.1 no-access
Row definition of frame relay to frame relay PVC connections
                                 frFrPvcIfA 1.3.6.1.4.1.1751.2.18.6.8.1.1 intfindex no-access
Interface index for side A of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 frFrPvcDlciA 1.3.6.1.4.1.1751.2.18.6.8.1.2 integer32 no-access
DLCI value for side A of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023.
                                 frFrPvcIfB 1.3.6.1.4.1.1751.2.18.6.8.1.3 intfindex no-access
Interface index for side B of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 frFrPvcDlciB 1.3.6.1.4.1.1751.2.18.6.8.1.4 integer32 no-access
DLCI value for side B of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023.
                                 frFrPvcMaxFrameSizeA2B 1.3.6.1.4.1.1751.2.18.6.8.1.5 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this PVC in the A to B direction.
                                 frFrPvcBcA2B 1.3.6.1.4.1.1751.2.18.6.8.1.6 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the A to B direction.
                                 frFrPvcBeA2B 1.3.6.1.4.1.1751.2.18.6.8.1.7 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the A to B direction.
                                 frFrPvcCirA2B 1.3.6.1.4.1.1751.2.18.6.8.1.8 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the A to B direction.
                                 frFrPvcMaxFrameSizeB2A 1.3.6.1.4.1.1751.2.18.6.8.1.9 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this PVC in the B to A direction.
                                 frFrPvcBcB2A 1.3.6.1.4.1.1751.2.18.6.8.1.10 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the B to A direction.
                                 frFrPvcBeB2A 1.3.6.1.4.1.1751.2.18.6.8.1.11 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the B to A direction.
                                 frFrPvcCirB2A 1.3.6.1.4.1.1751.2.18.6.8.1.12 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the B to A direction.
                                 frFrPvcServiceType 1.3.6.1.4.1.1751.2.18.6.8.1.13 integer read-write
service type, Frame relay traffic is carried by VBR type of service only. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                 frFrPvcFlow 1.3.6.1.4.1.1751.2.18.6.8.1.14 integer read-write
Flow Type Enumeration: 'duplex': 1, 'simplexA2B': 2.
                                 frFrPvcRowStatus 1.3.6.1.4.1.1751.2.18.6.8.1.15 rowstatus read-write
row status
                                 frFrPvcTimeLenA2B 1.3.6.1.4.1.1751.2.18.6.8.1.16 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                 frFrPvcInterWorkingFuncA2B 1.3.6.1.4.1.1751.2.18.6.8.1.17 integer read-write
InterWorking function. Enumeration: 'frf8-Transl': 1, 'frf5': 3, 'frf8-Pass': 2.
                                 frFrPvcTimeLenB2A 1.3.6.1.4.1.1751.2.18.6.8.1.18 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                 frFrPvcInterWorkingFuncB2A 1.3.6.1.4.1.1751.2.18.6.8.1.19 integer read-write
InterWorking function. Enumeration: 'frf8-Transl': 1, 'frf5': 3, 'frf8-Pass': 2.
                                 frFrPvcPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.8.1.20 integer32 read-only
Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frFrPvcSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.8.1.21 integer32 read-only
Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frFrPvcMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.8.1.22 integer32 read-only
Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms.
                                 frFrPvcPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.8.1.23 integer32 read-only
Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frFrPvcSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.8.1.24 integer32 read-only
Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms.
                                 frFrPvcMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.8.1.25 integer32 read-only
Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms.
                                 frFrPvcConnectionStatus 1.3.6.1.4.1.1751.2.18.6.8.1.26 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 frFrPvcConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.8.1.27 frconnfailurecause read-only
connestion status reason code
                                 frFrPvcConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.8.1.28 frconnfailurecause read-only
connection status reason code
                         vbrAtmPvcVccTable 1.3.6.1.4.1.1751.2.18.6.9 no-access
Table of terminal emulation to ATM network IWF connections
                             vbrAtmPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.9.1 no-access
Row definition of terminal emulation to ATM network IWF connections
                                 vbrAtmPvcVccIfA 1.3.6.1.4.1.1751.2.18.6.9.1.1 intfindex no-access
Interface index for side A, the variable bit rate side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 vbrAtmPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.9.1.2 intfindex no-access
Interface index for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                 vbrAtmPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.9.1.3 integer no-access
VPI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 4095.
                                 vbrAtmPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.9.1.4 integer no-access
VCI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535.
                                 vbrAtmPvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.9.1.5 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'gfr2': 7, 'vbr-express': 6.
                                 vbrAtmPvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.9.1.6 integer32 read-write
peak cell rate - side A, in cell per second
                                 vbrAtmPvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.9.1.7 integer32 read-write
sustained rate - side A, in cell per second
                                 vbrAtmPvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.9.1.8 integer32 read-write
maximum burst size - side A, in cells
                                 vbrAtmPvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.9.1.9 integer32 read-write
peak rate - side B, in cell per second.
                                 vbrAtmPvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.9.1.10 integer32 read-write
sustained rate - side B, in cell per second.
                                 vbrAtmPvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.9.1.11 integer32 read-write
maximum burst size - side B, in cells.
                                 vbrAtmPvcVccFlow 1.3.6.1.4.1.1751.2.18.6.9.1.12 integer read-write
Flow type Enumeration: 'duplex': 1, 'simplexB2A': 3, 'simplexA2B': 2.
                                 vbrAtmPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.9.1.13 rowstatus read-write
row status
                                 vbrAtmPvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.9.1.14 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                 vbrAtmPvcVccDualHomed 1.3.6.1.4.1.1751.2.18.6.9.1.15 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                 vbrAtmPvcVccOamStatus 1.3.6.1.4.1.1751.2.18.6.9.1.16 integer read-write
Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                                 vbrAtmPvcVccViB 1.3.6.1.4.1.1751.2.18.6.9.1.17 integer read-write
VI to associate the Egress part of the A2B connection .
                                 vbrAtmPvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.9.1.18 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                 vbrAtmPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.9.1.19 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                 vbrAtmPvcVccOAMConnEndPtStatus 1.3.6.1.4.1.1751.2.18.6.9.1.20 integer read-only
Connection endpoint status. Valid only at connection endpoint. Enumeration: 'ete-rdi-state': 3, 'ete-ais-rdi-state': 4, 'ete-active': 1, 'ete-ais-state': 2.
                                 vbrAtmPvcVccOAMSegEndPtStatus 1.3.6.1.4.1.1751.2.18.6.9.1.21 integer read-only
Segment endpoint status. Valid only at segment/connection endpoint. Enumeration: 'seg-active': 1, 'seg-ais-state': 2, 'seg-rdi-state': 3, 'seg-ais-rdi-state': 4.
                                 vbrAtmPvcVccMfsB2A 1.3.6.1.4.1.1751.2.18.6.9.1.22 integer read-write
Maximum Frame Size for GFR traffic
                                 vbrAtmPvcVccConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.9.1.23 connfailurecause read-only
connestion status reason code
                                 vbrAtmPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.9.1.24 atmconnfailurecause read-only
connection status reason code
                                 vbrAtmPvcVccSarTypeB 1.3.6.1.4.1.1751.2.18.6.9.1.25 integer read-write
This field will be used to connect hdlc to atm directly when sar type is none or aal5 or go through dsp2 first when sar type is aal2Std. Enumeration: 'aal2Std': 3, 'none': 1, 'aal5': 2.
                                 vbrAtmPvcVccAal2Cid 1.3.6.1.4.1.1751.2.18.6.9.1.26 integer read-write
Aal2 Cid Used to pack hdlc chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2.
                                 vbrAtmPvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.9.1.27 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         cirEmCirEmPvcTable 1.3.6.1.4.1.1751.2.18.6.10 no-access
Table of Circuit Emulation to Circuit Emulation
                               cirEmCirEmPvcEntry 1.3.6.1.4.1.1751.2.18.6.10.1 no-access
Row definition of circuit emulation to circuit emulation connections.
                                   cirEmCirEmPvcIfA 1.3.6.1.4.1.1751.2.18.6.10.1.1 intfindex no-access
Interface index for side A of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   cirEmCirEmPvcIfB 1.3.6.1.4.1.1751.2.18.6.10.1.2 intfindex no-access
Interface index for side B of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   cirEmCirEmPvcEchoCancellationA2B 1.3.6.1.4.1.1751.2.18.6.10.1.5 integer read-write
Echo cancellation off/on Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   cirEmCirEmPvcFlow 1.3.6.1.4.1.1751.2.18.6.10.1.6 integer read-write
Flow Type Enumeration: 'duplex': 1, 'simplexA2B': 2.
                                   cirEmCirEmPvcRowStatus 1.3.6.1.4.1.1751.2.18.6.10.1.7 rowstatus read-write
row status
                                   cirEmCirEmPvcCodingTranslationA2B 1.3.6.1.4.1.1751.2.18.6.10.1.8 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   cirEmCirEmPvcEchoCancellationB2A 1.3.6.1.4.1.1751.2.18.6.10.1.9 integer read-write
Echo cancellation off/on Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   cirEmCirEmPvcCodingTranslationB2A 1.3.6.1.4.1.1751.2.18.6.10.1.10 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   cirEmCirEmPvcConnectionStatus 1.3.6.1.4.1.1751.2.18.6.10.1.11 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                   cirEmCirEmPvcInterworking 1.3.6.1.4.1.1751.2.18.6.10.1.12 integer read-write
CE - CE interworking enable/disabled Enumeration: 'disabled': 1, 'enabled': 2.
                                   cirEmCirEmPvcServiceType 1.3.6.1.4.1.1751.2.18.6.10.1.13 integer read-write
service type Enumeration: 'cbr-1': 1, 'cbr-3': 3, 'cbr-2': 2, 'cbr-4': 4.
                                   cirEmCirEmPvcConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.10.1.14 connfailurecause read-only
connestion status reason code
                                   cirEmCirEmPvcConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.10.1.15 connfailurecause read-only
connection status reason code
                         vbrVbrPvcTable 1.3.6.1.4.1.1751.2.18.6.11 no-access
Table of terminal emulation to ATM network IWF connections
                               vbrVbrPvcEntry 1.3.6.1.4.1.1751.2.18.6.11.1 no-access
Row definition of terminal emulation to ATM network IWF connections
                                   vbrVbrPvcIfA 1.3.6.1.4.1.1751.2.18.6.11.1.1 intfindex no-access
Interface index for side A of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   vbrVbrPvcIfB 1.3.6.1.4.1.1751.2.18.6.11.1.2 intfindex no-access
Interface index for side B of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   vbrVbrPvcPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.11.1.3 integer32 read-write
peak cell rate - side A, in cell per second
                                   vbrVbrPvcSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.11.1.4 integer32 read-write
sustained rate - side A, in cell per second
                                   vbrVbrPvcMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.11.1.5 integer32 read-write
maximum burst size - side A, in cells
                                   vbrVbrPvcPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.11.1.6 integer32 read-write
peak rate - side B, in cell per second.
                                   vbrVbrPvcSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.11.1.7 integer32 read-write
sustained rate - side B, in cell per second.
                                   vbrVbrPvcMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.11.1.8 integer32 read-write
maximum burst size - side B, in cells.
                                   vbrVbrPvcFlow 1.3.6.1.4.1.1751.2.18.6.11.1.9 integer read-write
Flow Type Enumeration: 'duplex': 1, 'simplexA2B': 2.
                                   vbrVbrPvcRowStatus 1.3.6.1.4.1.1751.2.18.6.11.1.10 rowstatus read-write
row status
                                   vbrVbrPvcConnectionStatus 1.3.6.1.4.1.1751.2.18.6.11.1.11 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                   vbrVbrPvcServiceType 1.3.6.1.4.1.1751.2.18.6.11.1.12 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   vbrVbrPvcConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.11.1.13 connfailurecause read-only
connestion status reason code
                                   vbrVbrPvcConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.11.1.14 connfailurecause read-only
connection status reason code
                         bridgeBridgePvcTable 1.3.6.1.4.1.1751.2.18.6.12 no-access
A table of bridge-bridge PVC connection
                               bridgeBridgePvcEntry 1.3.6.1.4.1.1751.2.18.6.12.1 no-access
Row definitions of bridge-bridge PVC connection attributes
                                   bridgeBridgePvcIfA 1.3.6.1.4.1.1751.2.18.6.12.1.1 integer32 no-access
Interface index for side A of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   bridgeBridgePvcIfB 1.3.6.1.4.1.1751.2.18.6.12.1.2 integer32 no-access
Interface index for side B of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   bridgeBridgePvcRowStatus 1.3.6.1.4.1.1751.2.18.6.12.1.3 rowstatus read-write
row status
                                   bridgeBridgePvcConnectionStatus 1.3.6.1.4.1.1751.2.18.6.12.1.4 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                   bridgeBridgePvcConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.12.1.5 connfailurecause read-only
connestion status reason code
                                   bridgeBridgePvcConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.12.1.6 connfailurecause read-only
connection status reason code
                         bridgeAtmPvcVccTable 1.3.6.1.4.1.1751.2.18.6.13 no-access
Table of bridge Atm PVC VCC connection entries
                               bridgeAtmPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.13.1 no-access
Row definition of bridge atm PVC VCC connection attribution.
                                   bridgeAtmPvcVccIfA 1.3.6.1.4.1.1751.2.18.6.13.1.1 integer32 no-access
Interface index for side A, the bridge side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   bridgeAtmPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.13.1.2 integer32 no-access
Interface index for side B, the atm side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   bridgeAtmPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.13.1.3 integer no-access
VPI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 4095.
                                   bridgeAtmPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.13.1.4 integer no-access
VCI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 65535.
                                   bridgeAtmPvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.13.1.5 integer read-write
service type Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'gfr2': 7, 'vbr-express': 6.
                                   bridgeAtmPvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.13.1.6 integer32 read-write
peak rate - side B, in cell per second.
                                   bridgeAtmPvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.13.1.7 integer32 read-write
sustained rate - side B, in cell per second.
                                   bridgeAtmPvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.13.1.8 integer32 read-write
maximum burst size - side B, in cells.
                                   bridgeAtmPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.13.1.9 rowstatus read-write
row status
                                   bridgeAtmPvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.13.1.10 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                   bridgeAtmPvcVccDualHomed 1.3.6.1.4.1.1751.2.18.6.13.1.11 integer read-only
Does this PVC need a backup Dual homing PVC. Enumeration: 'yes': 2, 'no': 1.
                                   bridgeAtmPvcVccViB 1.3.6.1.4.1.1751.2.18.6.13.1.12 integer read-write
VI to associate the Egress part of the A2B connection .
                                   bridgeAtmPvcVccCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.13.1.14 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                   bridgeAtmPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.13.1.15 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   bridgeAtmPvcVccMfsB2A 1.3.6.1.4.1.1751.2.18.6.13.1.16 integer read-write
Maximum Frame Size for GFR traffic
                                   bridgeAtmPvcVccConnFailureCauseA 1.3.6.1.4.1.1751.2.18.6.13.1.17 connfailurecause read-only
connestion status reason code
                                   bridgeAtmPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.13.1.18 atmconnfailurecause read-only
connection status reason code
                                   bridgeAtmPvcVccOamStatus 1.3.6.1.4.1.1751.2.18.6.13.1.19 integer read-write
Indicates the OAM monitoring status of side A. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore End-Seg-Pt: A side is both an end point and a segment point. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                                   bridgeAtmPvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.13.1.20 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         cirEmAtmBkPvcVccTable 1.3.6.1.4.1.1751.2.18.6.14 no-access
This table is used to manage CES DHPVC backup pvc.
                               cirEmAtmBkPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.14.1 no-access
An entry in the CES DHPVC table. There is one entry in the table corresponding to each active row in the cirEmAtmPvcVccTable for which the cirEmAtmPvcVccDualHomed object takes the value 'yes.'
                                   cirEmAtmBkPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.14.1.1 intfindex read-write
Interface index for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   cirEmAtmBkPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.14.1.2 integer read-write
VPI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095.
                                   cirEmAtmBkPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.14.1.3 integer read-write
VCI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535.
                                   cirEmAtmBkPvcVccActivePvc 1.3.6.1.4.1.1751.2.18.6.14.1.4 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   cirEmAtmBkPvcVccAutoSwitch 1.3.6.1.4.1.1751.2.18.6.14.1.5 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   cirEmAtmBkPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.14.1.6 rowstatus read-write
row status
                                   cirEmAtmBkPvcVccViB 1.3.6.1.4.1.1751.2.18.6.14.1.7 integer read-write
VI to associate the Egress part of the A2B connection .
                                   cirEmAtmBkPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.14.1.8 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   cirEmAtmBkPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.14.1.9 atmconnfailurecause read-only
connection status reason code
                         vbrAtmBkPvcVccTable 1.3.6.1.4.1.1751.2.18.6.15 no-access
This table is used to manage terminal emulation DHPVC backup pvc.
                               vbrAtmBkPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.15.1 no-access
An entry in the terminal emulation DHPVC table. There is one entry in the table corresponding to each active row in the vbrAtmPvcVccTable for which the vbrAtmPvcVccDualHomed object takes the value 'yes'.
                                   vbrAtmBkPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.15.1.1 intfindex read-write
Interface index for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   vbrAtmBkPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.15.1.2 integer read-write
VPI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095.
                                   vbrAtmBkPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.15.1.3 integer read-write
VCI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535.
                                   vbrAtmBkPvcVccActivePvc 1.3.6.1.4.1.1751.2.18.6.15.1.4 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   vbrAtmBkPvcVccAutoSwitch 1.3.6.1.4.1.1751.2.18.6.15.1.5 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   vbrAtmBkPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.15.1.6 rowstatus read-write
row status
                                   vbrAtmBkPvcVccViB 1.3.6.1.4.1.1751.2.18.6.15.1.7 integer read-write
VI to associate the Egress part of the A2B connection .
                                   vbrAtmBkPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.15.1.8 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   vbrAtmBkPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.15.1.9 atmconnfailurecause read-only
connection status reason code
                         atmSpvcVccAddrTable 1.3.6.1.4.1.1751.2.18.6.16 no-access
Table of SPVC ATM network interface addresses.
                               atmSpvcVccAddrEntry 1.3.6.1.4.1.1751.2.18.6.16.1 no-access
Row definition of ATM SPVC address table.
                                   atmSpvcVccIfA 1.3.6.1.4.1.1751.2.18.6.16.1.1 intfindex no-access
Interface index for side A of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   atmSpvcVccAtmPortAddr 1.3.6.1.4.1.1751.2.18.6.16.1.2 octet string read-write
Local ATM port NSAP address.
                                   atmSpvcVccAddrRowStatus 1.3.6.1.4.1.1751.2.18.6.16.1.3 rowstatus read-write
This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established.
                         atmSpvcVccTable 1.3.6.1.4.1.1751.2.18.6.17 no-access
Table of SPVC ATM virtual channel connections.
                               atmSpvcVccEntry 1.3.6.1.4.1.1751.2.18.6.17.1 no-access
Row definition of ATM SPVC VCC connections.
                                   atmSpvcVccVpiA 1.3.6.1.4.1.1751.2.18.6.17.1.1 integer no-access
VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   atmSpvcVccVciA 1.3.6.1.4.1.1751.2.18.6.17.1.2 integer no-access
VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   atmSpvcVccIfB 1.3.6.1.4.1.1751.2.18.6.17.1.3 intfindex read-only
Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   atmSpvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.17.1.4 integer read-only
VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   atmSpvcVccVciB 1.3.6.1.4.1.1751.2.18.6.17.1.5 integer read-only
VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   atmSpvcVccServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.17.1.6 integer read-write
Service type, ATM port. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   atmSpvcVccSarTypeA2B 1.3.6.1.4.1.1751.2.18.6.17.1.7 integer read-write
SAR type used in ATM adaption, ATM port. Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                   atmSpvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.17.1.8 integer32 read-write
Peak cell rate - side A, ATM port, in cells per second.
                                   atmSpvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.17.1.9 integer32 read-write
Sustained cell rate - side A, ATM port, in cells per second.
                                   atmSpvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.17.1.10 integer32 read-write
Maximum burst size - side A, ATM port, in cells per second.
                                   atmSpvcVccFrwdErrCorrectionA2B 1.3.6.1.4.1.1751.2.18.6.17.1.11 integer read-write
Forward error correction scheme, ATM port side. Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   atmSpvcVccServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.17.1.12 integer read-write
Service type, ATM trunk side. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   atmSpvcVccSarTypeB2A 1.3.6.1.4.1.1751.2.18.6.17.1.13 integer read-write
SAR type used in ATM adaption, ATM trunk side. Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                   atmSpvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.17.1.14 integer32 read-write
Peak cell rate - side B, ATM trunk, in cells per second.
                                   atmSpvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.17.1.15 integer32 read-write
Sustained cell rate - side B, ATM trunk, in cells per second.
                                   atmSpvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.17.1.16 integer32 read-write
Maximum burst size - side A, ATM trunk, in cells per second.
                                   atmSpvcVccFrwdErrCorrectionB2A 1.3.6.1.4.1.1751.2.18.6.17.1.17 integer read-write
Forward error correction scheme, ATM trunk side. Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   atmSpvcVccFlow 1.3.6.1.4.1.1751.2.18.6.17.1.18 integer read-write
Type of flow, pointToMultipointA2B is for future support. Enumeration: 'duplex': 1, 'simplexB2A': 4, 'simplexA2B': 2, 'pointToMultipointA2B': 3.
                                   atmSpvcVccType 1.3.6.1.4.1.1751.2.18.6.17.1.19 integer read-write
Type of connection. Enumeration: 'secured': 2, 'nonsecured': 1.
                                   atmSpvcVccConnType 1.3.6.1.4.1.1751.2.18.6.17.1.20 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   atmSpvcVccLeafReference 1.3.6.1.4.1.1751.2.18.6.17.1.21 integer read-only
An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1.
                                   atmSpvcVccOperStatus 1.3.6.1.4.1.1751.2.18.6.17.1.22 integer read-only
The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'noAddressSupplied': 5.
                                   atmSpvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.17.1.23 rowstatus read-write
Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released.
                                   atmSpvcVccViA 1.3.6.1.4.1.1751.2.18.6.17.1.24 integer read-write
VI to associate the Egress part of the B2A connection .
                                   atmSpvcVccViB 1.3.6.1.4.1.1751.2.18.6.17.1.25 integer read-write
VI to associate the Egress part of the A2B connection .
                                   atmSpvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.17.1.26 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmSpvcVccTrafficShapingB2A 1.3.6.1.4.1.1751.2.18.6.17.1.27 integer read-write
Traffic Shaping Support in the B2A direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         atmSpvcVccActiveSvcTable 1.3.6.1.4.1.1751.2.18.6.18 no-access
The table used to manage active SVCs established across ATM networks between ATM entities.
                               atmSpvcVccActiveSvcEntry 1.3.6.1.4.1.1751.2.18.6.18.1 no-access
An entry in the ATM active SVC table. There is one entry in the table corresponding to each active row in the atm SPVC VCC Table for which the atmSpvcVccConnType takes the value 'activeSvc'.
                                   atmSpvcVccRemoteAtmPortAddr 1.3.6.1.4.1.1751.2.18.6.18.1.1 octet string read-write
Remote ATM port NSAP address, not meaningful if passive type of connection.
                                   atmSpvcVccRemoteSelectType 1.3.6.1.4.1.1751.2.18.6.18.1.2 integer read-write
Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmSpvcVccRemoteVpi and atmSpvcVccRemoteVci, must be supplied and are used at the destination. Enumeration: 'required': 1, 'any': 2.
                                   atmSpvcVccRemoteVpi 1.3.6.1.4.1.1751.2.18.6.18.1.3 integer read-write
VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   atmSpvcVccRemoteVci 1.3.6.1.4.1.1751.2.18.6.18.1.4 integer read-write
VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   atmSpvcVccRetryInterval 1.3.6.1.4.1.1751.2.18.6.18.1.5 integer read-write
The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retry will be attempted immediately.
                                   atmSpvcVccRetryLimit 1.3.6.1.4.1.1751.2.18.6.18.1.6 integer read-write
A maximum limit on how many retries should be attempted. A value of 0 indicates no limit.
                                   atmSpvcVccRestart 1.3.6.1.4.1.1751.2.18.6.18.1.7 integer read-write
The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. Enumeration: 'noop': 2, 'restart': 1.
                                   atmSpvcVccRetryFailure 1.3.6.1.4.1.1751.2.18.6.18.1.8 integer32 read-only
Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted.
                                   atmSpvcVccReleaseCause 1.3.6.1.4.1.1751.2.18.6.18.1.9 integer read-only
CAUSE field value of the last RELEASE message received for this SVC.
                                   atmSpvcVccReleaseDiag 1.3.6.1.4.1.1751.2.18.6.18.1.10 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC.
                         cirEmAtmSpvcVccTable 1.3.6.1.4.1.1751.2.18.6.19 no-access
Table of Circuit Emulation to ATM Soft PVCs.
                               cirEmAtmSpvcVccEntry 1.3.6.1.4.1.1751.2.18.6.19.1 no-access
Row definition of circuit emulation to ATM SPVC connections.
                                   cirEmAtmSpvcVccIfA 1.3.6.1.4.1.1751.2.18.6.19.1.1 intfindex no-access
Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   cirEmAtmSpvcVccIfB 1.3.6.1.4.1.1751.2.18.6.19.1.2 intfindex read-only
Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   cirEmAtmSpvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.19.1.3 integer read-only
VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   cirEmAtmSpvcVccVciB 1.3.6.1.4.1.1751.2.18.6.19.1.4 integer read-only
VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   cirEmAtmSpvcVccVoiceCompressionA2B 1.3.6.1.4.1.1751.2.18.6.19.1.5 integer read-write
Voice Compression Algorithm Enumeration: 'g726-16k': 2, 'none': 1, 'g726-24k': 3, 'g726-40k': 5, 'g726-32k': 4.
                                   cirEmAtmSpvcVccSilenceDetectionA2B 1.3.6.1.4.1.1751.2.18.6.19.1.6 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   cirEmAtmSpvcVccEchoCancellationA2B 1.3.6.1.4.1.1751.2.18.6.19.1.7 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   cirEmAtmSpvcVccCngToneDetectionA2B 1.3.6.1.4.1.1751.2.18.6.19.1.8 integer read-write
Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM Enumeration: 'disabled': 1, 'bypass': 2, 'g726-32k': 3.
                                   cirEmAtmSpvcVccCodingTranslationA2B 1.3.6.1.4.1.1751.2.18.6.19.1.9 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   cirEmAtmSpvcVccVoiceCompressionB2A 1.3.6.1.4.1.1751.2.18.6.19.1.10 integer read-write
Voice Compression Algorithm Enumeration: 'g726-16k': 2, 'none': 1, 'g726-24k': 3, 'g726-40k': 5, 'g726-32k': 4.
                                   cirEmAtmSpvcVccSilenceDetectionB2A 1.3.6.1.4.1.1751.2.18.6.19.1.11 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   cirEmAtmSpvcVccEchoCancellationB2A 1.3.6.1.4.1.1751.2.18.6.19.1.12 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   cirEmAtmSpvcVccCngToneDetectionB2A 1.3.6.1.4.1.1751.2.18.6.19.1.13 integer read-write
Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM Enumeration: 'disabled': 1, 'bypass': 2, 'g726-32k': 3.
                                   cirEmAtmSpvcVccCodingTranslationB2A 1.3.6.1.4.1.1751.2.18.6.19.1.14 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   cirEmAtmSpvcVccFlow 1.3.6.1.4.1.1751.2.18.6.19.1.15 integer read-write
Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support. Enumeration: 'duplex': 1, 'simplexB2A': 3, 'pointToMultipointB2A': 5, 'simplexA2B': 2, 'pointToMultipointA2B': 4.
                                   cirEmAtmSpvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.19.1.16 integer read-write
service type Enumeration: 'cbr-1': 1, 'cbr-3': 3, 'cbr-2': 2, 'cbr-4': 4.
                                   cirEmAtmSpvcVccConnType 1.3.6.1.4.1.1751.2.18.6.19.1.17 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   cirEmAtmSpvcVccCePortAddr 1.3.6.1.4.1.1751.2.18.6.19.1.18 octet string read-write
local CES port nsap address
                                   cirEmAtmSpvcVccOperStatus 1.3.6.1.4.1.1751.2.18.6.19.1.19 integer read-only
other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'noAddressSupplied': 5.
                                   cirEmAtmSpvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.19.1.20 rowstatus read-write
Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released.
                                   cirEmAtmSpvcVccViB 1.3.6.1.4.1.1751.2.18.6.19.1.21 integer read-write
VI to associate the Egress part of the B2A connection .
                         cirEmAtmSpvcVccActiveSvcTable 1.3.6.1.4.1.1751.2.18.6.20 no-access
The table used to manage active SVCs established across ATM networks between CES entities.
                               cirEmAtmSpvcVccActiveSvcEntry 1.3.6.1.4.1.1751.2.18.6.20.1 no-access
An entry in the CES active SVC table. There is one entry in the table corresponding to each active row in the cirEmAtmSpvcVccRowStatus for which the cirEmAtmSpvcVccConnType takes the value 'activeSvc'.
                                   cirEmAtmSpvcVccRemoteCePortAddr 1.3.6.1.4.1.1751.2.18.6.20.1.1 octet string read-write
The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated.
                                   cirEmAtmSpvcVccRetryInterval 1.3.6.1.4.1.1751.2.18.6.20.1.2 integer read-write
The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately.
                                   cirEmAtmSpvcVccRetryLimit 1.3.6.1.4.1.1751.2.18.6.20.1.3 integer read-write
A maximum limit on how many retries. 0 indicates no limit.
                                   cirEmAtmSpvcVccRestart 1.3.6.1.4.1.1751.2.18.6.20.1.4 integer read-write
restart, the active SVC is released if necessary and a new setup procedure is begun; or noop Enumeration: 'noop': 2, 'restart': 1.
                                   cirEmAtmSpvcVccRetryFailure 1.3.6.1.4.1.1751.2.18.6.20.1.5 integer32 read-only
Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted.
                                   cirEmAtmSpvcVccReleaseCause 1.3.6.1.4.1.1751.2.18.6.20.1.6 integer read-only
CAUSE field value of the last RELEASE message received for this SVC.
                                   cirEmAtmSpvcVccReleaseDiag 1.3.6.1.4.1.1751.2.18.6.20.1.7 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC.
                         vbrAtmSpvcVccTable 1.3.6.1.4.1.1751.2.18.6.21 no-access
Table of SPVC atm virtual channel connections
                               vbrAtmSpvcVccEntry 1.3.6.1.4.1.1751.2.18.6.21.1 no-access
Row definition of atm SPVC VCC connections
                                   vbrAtmSpvcVccIfA 1.3.6.1.4.1.1751.2.18.6.21.1.1 intfindex no-access
Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   vbrAtmSpvcVccIfB 1.3.6.1.4.1.1751.2.18.6.21.1.2 intfindex read-only
Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   vbrAtmSpvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.21.1.3 integer read-only
VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   vbrAtmSpvcVccVciB 1.3.6.1.4.1.1751.2.18.6.21.1.4 integer read-only
VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   vbrAtmSpvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.21.1.5 integer read-write
service type Enumeration: 'vbr-rt1': 4, 'vbr-rt2': 5, 'ubr': 1, 'vbr-nrt2': 3, 'vbr-nrt1': 2, 'vbr-express': 6.
                                   vbrAtmSpvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.21.1.6 integer32 read-write
peak cell rate - side A, in cell per second
                                   vbrAtmSpvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.21.1.7 integer32 read-write
sustained rate - side A, in cell per second
                                   vbrAtmSpvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.21.1.8 integer32 read-write
maximum burst size - side A, in cells
                                   vbrAtmSpvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.21.1.9 integer32 read-write
peak rate - side B, ATM trunk, in cell per second.
                                   vbrAtmSpvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.21.1.10 integer32 read-write
sustained rate - side B, ATM trunk, in cell per second.
                                   vbrAtmSpvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.21.1.11 integer32 read-write
maximum burst size - side B, ATM trunk, in cells.
                                   vbrAtmSpvcVccFlow 1.3.6.1.4.1.1751.2.18.6.21.1.12 integer read-write
type of flow Enumeration: 'duplex': 1, 'simplexB2A': 3, 'simplexA2B': 2.
                                   vbrAtmSpvcVccConnType 1.3.6.1.4.1.1751.2.18.6.21.1.13 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   vbrAtmSpvcVccVbrPortAddr 1.3.6.1.4.1.1751.2.18.6.21.1.14 octet string read-write
local Vbr port nsap address
                                   vbrAtmSpvcVccOperStatus 1.3.6.1.4.1.1751.2.18.6.21.1.15 integer read-only
other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'noAddressSupplied': 5.
                                   vbrAtmSpvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.21.1.16 rowstatus read-write
Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released.
                                   vbrAtmSpvcVccViB 1.3.6.1.4.1.1751.2.18.6.21.1.17 integer read-write
VI to associate the Egress part of the B2A connection .
                                   vbrAtmSpvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.21.1.18 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                         vbrAtmSpvcVccActiveSvcTable 1.3.6.1.4.1.1751.2.18.6.22 no-access
The table used to manage active SVCs established across ATM networks between ATM entities.
                               vbrAtmSpvcVccActiveSvcEntry 1.3.6.1.4.1.1751.2.18.6.22.1 no-access
An entry in the Terminal Emulation ATM active SVC table. There is one entry in the table corresponding to each active row in the vbrAtmSpvcVccTable for which the vbrAtmSpvcVccConnType takes the value 'activeSvc'.
                                   vbrAtmSpvcVccRemoteVbrPortAddr 1.3.6.1.4.1.1751.2.18.6.22.1.1 octet string read-write
remote VBR port nsap address implemening IWF, not meaningful if passive type of connection
                                   vbrAtmSpvcVccRetryInterval 1.3.6.1.4.1.1751.2.18.6.22.1.2 integer read-write
the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately.
                                   vbrAtmSpvcVccRetryLimit 1.3.6.1.4.1.1751.2.18.6.22.1.3 integer read-write
a maximum limit on how many retries. 0 indicates no limit.
                                   vbrAtmSpvcVccRestart 1.3.6.1.4.1.1751.2.18.6.22.1.4 integer read-write
restart, the active SVC is released if necessary and a new setup procedure is begun; or noop Enumeration: 'noop': 2, 'restart': 1.
                                   vbrAtmSpvcVccRetryFailure 1.3.6.1.4.1.1751.2.18.6.22.1.5 integer32 read-only
indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted.
                                   vbrAtmSpvcVccReleaseCause 1.3.6.1.4.1.1751.2.18.6.22.1.6 integer read-only
CAUSE field value of the last RELEASE message received for this SVC
                                   vbrAtmSpvcVccReleaseDiag 1.3.6.1.4.1.1751.2.18.6.22.1.7 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC
                         atmSpvcVccRlsTable 1.3.6.1.4.1.1751.2.18.6.23 no-access
This table is an extension of atmSpvcVccTable and is used to release a ATM-ATM SPVC connection without deleting the configured data.
                               atmSpvcVccRlsEntry 1.3.6.1.4.1.1751.2.18.6.23.1 no-access
Row definition of CES SPVC release table. This entry is created whenever an entry is created in atmSpvcVccTable.
                                   atmSpvcVccRelease 1.3.6.1.4.1.1751.2.18.6.23.1.1 integer read-write
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                         cirEmAtmSpvcVccRlsTable 1.3.6.1.4.1.1751.2.18.6.24 no-access
This table is an extension of cirEmAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data.
                               cirEmAtmSpvcVccRlsEntry 1.3.6.1.4.1.1751.2.18.6.24.1 no-access
Row definition of CES SPVC release table. This entry is created whenever an entry is created in cirEmAtmSpvcVccTable.
                                   cirEmAtmSpvcVccRelease 1.3.6.1.4.1.1751.2.18.6.24.1.1 integer read-write
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                         vbrAtmSpvcVccRlsTable 1.3.6.1.4.1.1751.2.18.6.25 no-access
This table is an extension of vbrAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data.
                               vbrAtmSpvcVccRlsEntry 1.3.6.1.4.1.1751.2.18.6.25.1 no-access
Row definition of TE SPVC release table. This entry is created whenever an entry is created in vbrAtmSpvcVccTable.
                                   vbrAtmSpvcVccRelease 1.3.6.1.4.1.1751.2.18.6.25.1.1 integer read-write
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                         frAtmBkPvcVccTable 1.3.6.1.4.1.1751.2.18.6.26 no-access
This table is used to manage frame relay DHPVC backup pvc.
                               frAtmBkPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.26.1 no-access
An entry in the frame relay DHPVC table. There is one entry in the table corresponding to each active row in the frAtmPvcVccTable for which the frAtmPvcVccDualHomed object takes the value 'yes.'
                                   frAtmBkPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.26.1.1 intfindex read-write
Interface index for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   frAtmBkPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.26.1.2 integer read-write
VPI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 4095.
                                   frAtmBkPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.26.1.3 integer read-write
VCI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 65535.
                                   frAtmBkPvcVccActivePvc 1.3.6.1.4.1.1751.2.18.6.26.1.4 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   frAtmBkPvcVccAutoSwitch 1.3.6.1.4.1.1751.2.18.6.26.1.5 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   frAtmBkPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.26.1.6 rowstatus read-write
row status
                                   frAtmBkPvcVccViB 1.3.6.1.4.1.1751.2.18.6.26.1.7 integer read-write
VI to associate the Egress part of the A2B connection .
                                   frAtmBkPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.26.1.8 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   frAtmBkPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.26.1.9 atmconnfailurecause read-only
connection status reason code
                         atmBkPvcVccTable 1.3.6.1.4.1.1751.2.18.6.27 no-access
This table is used to manage ATM to ATM DHPVC backup pvc.
                               atmBkPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.27.1 no-access
An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVccTable for which the atmPvcVccDualHomed object takes the value 'yes'.
                                   atmBkPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.27.1.1 intfindex read-write
Interface index for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   atmBkPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.27.1.2 integer read-write
VPI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 4095.
                                   atmBkPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.27.1.3 integer read-write
VCI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 65535.
                                   atmBkPvcVccActivePvc 1.3.6.1.4.1.1751.2.18.6.27.1.4 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   atmBkPvcVccAutoSwitch 1.3.6.1.4.1.1751.2.18.6.27.1.5 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   atmBkPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.27.1.6 rowstatus read-write
row status
                                   atmBkPvcVccViB 1.3.6.1.4.1.1751.2.18.6.27.1.7 integer read-write
VI to associate the Egress part of the A2B connection .
                                   atmBkPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.27.1.8 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   atmBkPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.27.1.9 atmconnfailurecause read-only
connection status reason code
                         atmBkPvcVpcTable 1.3.6.1.4.1.1751.2.18.6.28 no-access
This table is used to manage ATM to ATM DHPVC backup pvc.
                               atmBkPvcVpcEntry 1.3.6.1.4.1.1751.2.18.6.28.1 no-access
An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVpcTable for which the atmPvcVpcDualHomed object takes the value 'yes'.
                                   atmBkPvcVpcIfB 1.3.6.1.4.1.1751.2.18.6.28.1.1 intfindex read-write
Interface index for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   atmBkPvcVpcVpiB 1.3.6.1.4.1.1751.2.18.6.28.1.2 integer read-write
VPI value for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Valid range is a number between 0 and 4095.
                                   atmBkPvcVpcActivePvc 1.3.6.1.4.1.1751.2.18.6.28.1.3 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   atmBkPvcVpcAutoSwitch 1.3.6.1.4.1.1751.2.18.6.28.1.4 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   atmBkPvcVpcRowStatus 1.3.6.1.4.1.1751.2.18.6.28.1.5 rowstatus read-write
row status
                                   atmBkPvcVpcViB 1.3.6.1.4.1.1751.2.18.6.28.1.6 integer read-write
VI to associate the Egress part of the A2B connection .
                                   atmBkPvcVpcVUNIB 1.3.6.1.4.1.1751.2.18.6.28.1.7 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   atmBkPvcVpcConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.28.1.8 atmconnfailurecause read-only
connection status reason code
                         bridgeAtmBkPvcVccTable 1.3.6.1.4.1.1751.2.18.6.29 no-access
This table is used to manage bridge to atm DHPVC backup pvc.
                               bridgeAtmBkPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.29.1 no-access
An entry in the bridge to atm DHPVC table. There is one entry in the table corresponding to each active row in the bridgeAtmPvcVccTable for which the bridgeAtmPvcVccDualHomed object takes the value 'yes'.
                                   bridgeAtmBkPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.29.1.1 intfindex read-write
Interface index for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   bridgeAtmBkPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.29.1.2 integer read-write
VPI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 4095.
                                   bridgeAtmBkPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.29.1.3 integer read-write
VCI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 65535.
                                   bridgeAtmBkPvcVccActivePvc 1.3.6.1.4.1.1751.2.18.6.29.1.4 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   bridgeAtmBkPvcVccAutoSwitch 1.3.6.1.4.1.1751.2.18.6.29.1.5 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   bridgeAtmBkPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.29.1.6 rowstatus read-write
row status
                                   bridgeAtmBkPvcVccViB 1.3.6.1.4.1.1751.2.18.6.29.1.7 integer read-write
VI to associate the Egress part of the A2B connection .
                                   bridgeAtmBkPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.29.1.8 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   bridgeAtmBkPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.29.1.9 atmconnfailurecause read-only
connection status reason code
                         ipAtmBkAppPvcVccTable 1.3.6.1.4.1.1751.2.18.6.30 no-access
This table is used to manage in-band management to atm DHPVC backup pvc.
                               ipAtmBkAppPvcVccEntry 1.3.6.1.4.1.1751.2.18.6.30.1 no-access
An entry in the in-band management to atm DHPVC table. There is one entry in the table corresponding to each active row in the ipAtmAppPvcVccTable for which the ipAtmAppPvcVccDualHomed object takes the value 'yes'.
                                   ipAtmBkAppPvcVccIfB 1.3.6.1.4.1.1751.2.18.6.30.1.1 intfindex read-write
Interface index for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   ipAtmBkAppPvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.30.1.2 integer read-write
VPI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 4095.
                                   ipAtmBkAppPvcVccVciB 1.3.6.1.4.1.1751.2.18.6.30.1.3 integer read-write
VCI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 65535.
                                   ipAtmBkAppPvcVccActivePvc 1.3.6.1.4.1.1751.2.18.6.30.1.4 integer read-only
Current active PVC. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                   ipAtmBkAppPvcVccAutoSwitch 1.3.6.1.4.1.1751.2.18.6.30.1.5 integer read-write
Auto switch back to primary link when primary link is recovered. Enumeration: 'yes': 1, 'no': 2.
                                   ipAtmBkAppPvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.30.1.6 rowstatus read-write
row status
                                   ipAtmBkAppPvcVccViB 1.3.6.1.4.1.1751.2.18.6.30.1.7 integer read-write
VI to associate the Egress part of the A2B connection .
                                   ipAtmBkAppPvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.30.1.8 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   ipAtmBkAppPvcVccConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.30.1.9 atmconnfailurecause read-only
connection status reason code
                         spvcAddrTable 1.3.6.1.4.1.1751.2.18.6.31 no-access
Table of SPVC network interface addresses.
                               spvcAddrEntry 1.3.6.1.4.1.1751.2.18.6.31.1 no-access
Row definition of SPVC address table.
                                   spvcAddrIfA 1.3.6.1.4.1.1751.2.18.6.31.1.1 intfindex no-access
Interface index for side A of an SPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   spvcAddrLocalPortAddr 1.3.6.1.4.1.1751.2.18.6.31.1.2 octet string read-write
Local port NSAP address.
                                   spvcAddrRowStatus 1.3.6.1.4.1.1751.2.18.6.31.1.3 rowstatus read-write
This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established.
                         frAtmSpvcVccTable 1.3.6.1.4.1.1751.2.18.6.32 no-access
Table of frame relay to ATM IWF connections
                               frAtmSpvcVccEntry 1.3.6.1.4.1.1751.2.18.6.32.1 no-access
Row definition of frame relay to ATM IWF connections
                                   frAtmSpvcVccDlciA 1.3.6.1.4.1.1751.2.18.6.32.1.1 integer no-access
DLCI value for side A, the frame relay side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 1023.
                                   frAtmSpvcVccIfB 1.3.6.1.4.1.1751.2.18.6.32.1.2 intfindex read-only
Interface index for side B, the atm side, of a frame relay-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   frAtmSpvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.32.1.3 integer read-only
VPI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   frAtmSpvcVccVciB 1.3.6.1.4.1.1751.2.18.6.32.1.4 integer read-only
VCI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   frAtmSpvcVccMaxFrameSizeIn 1.3.6.1.4.1.1751.2.18.6.32.1.5 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress direction (out of the frame relay UNI).
                                   frAtmSpvcVccBcIn 1.3.6.1.4.1.1751.2.18.6.32.1.6 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI).
                                   frAtmSpvcVccBeIn 1.3.6.1.4.1.1751.2.18.6.32.1.7 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI).
                                   frAtmSpvcVccCirIn 1.3.6.1.4.1.1751.2.18.6.32.1.8 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the ingress direction (into the frame relay UNI).
                                   frAtmSpvcVccMaxFrameSizeOut 1.3.6.1.4.1.1751.2.18.6.32.1.9 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this SPVC in the egress direction (out of the frame relay UNI).
                                   frAtmSpvcVccBcOut 1.3.6.1.4.1.1751.2.18.6.32.1.10 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI).
                                   frAtmSpvcVccBeOut 1.3.6.1.4.1.1751.2.18.6.32.1.11 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI)
                                   frAtmSpvcVccCirOut 1.3.6.1.4.1.1751.2.18.6.32.1.12 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the egress direction (into the frame relay UNI).
                                   frAtmSpvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.32.1.13 integer read-write
service type, Frame relay traffic is carried by VBR type of service only. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   frAtmSpvcVccFlow 1.3.6.1.4.1.1751.2.18.6.32.1.14 integer read-write
Flow Type Enumeration: 'duplex': 1, 'simplexB2A': 3, 'simplexA2B': 2.
                                   frAtmSpvcVccTimeLenIn 1.3.6.1.4.1.1751.2.18.6.32.1.15 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                   frAtmSpvcVccTimeLenOut 1.3.6.1.4.1.1751.2.18.6.32.1.16 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                   frAtmSpvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.32.1.17 integer32 read-only
Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   frAtmSpvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.32.1.18 integer32 read-only
Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   frAtmSpvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.32.1.19 integer32 read-only
Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms.
                                   frAtmSpvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.32.1.20 integer32 read-only
Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   frAtmSpvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.32.1.21 integer32 read-only
Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   frAtmSpvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.32.1.22 integer32 read-only
Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms.
                                   frAtmSpvcVccInterWorkingFunc 1.3.6.1.4.1.1751.2.18.6.32.1.23 integer read-write
InterWorking function. Enumeration: 'frf8-Transl': 1, 'frf5': 3, 'frf8-Pass': 2.
                                   frAtmSpvcVccConnType 1.3.6.1.4.1.1751.2.18.6.32.1.24 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   frAtmSpvcVccOperStatus 1.3.6.1.4.1.1751.2.18.6.32.1.25 integer read-only
other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'waitingForRetryTimer': 8, 'waitingForCall': 7, 'noAddressSupplied': 5.
                                   frAtmSpvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.32.1.26 rowstatus read-write
row status
                                   frAtmSpvcVccRemoteFrPortAddr 1.3.6.1.4.1.1751.2.18.6.32.1.27 octet string read-write
The ATM address supporting the corresponding far end FR IWF process. If no address is supplied, no attempts to establish the active SVC are initiated.
                                   frAtmSpvcVccRemoteSelectType 1.3.6.1.4.1.1751.2.18.6.32.1.28 integer read-write
Indicates whether the remote DLCI/VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the DLCI/VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same DLCI/VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: frAtmSpvcVccRemoteDlci or frAtmSpvcVccRemoteVpi and frAtmSpvcVccRemoteVci, must be supplied and are used at the destination. Enumeration: 'required': 1, 'any': 2.
                                   frAtmSpvcVccRemoteDlci 1.3.6.1.4.1.1751.2.18.6.32.1.29 integer read-write
DLCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   frAtmSpvcVccRemoteVpi 1.3.6.1.4.1.1751.2.18.6.32.1.30 integer read-write
VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   frAtmSpvcVccRemoteVci 1.3.6.1.4.1.1751.2.18.6.32.1.31 integer read-write
VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   frAtmSpvcVccRetryInterval 1.3.6.1.4.1.1751.2.18.6.32.1.32 integer read-write
The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately.
                                   frAtmSpvcVccRetryLimit 1.3.6.1.4.1.1751.2.18.6.32.1.33 integer read-write
A maximum limit on how many retries. 0 indicates no limit.
                                   frAtmSpvcVccRestart 1.3.6.1.4.1.1751.2.18.6.32.1.34 integer read-write
restart, the active SVC is released if necessary and a new setup procedure is begun; or noop Enumeration: 'noop': 2, 'restart': 1.
                                   frAtmSpvcVccRetryFailure 1.3.6.1.4.1.1751.2.18.6.32.1.35 integer32 read-only
Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted.
                                   frAtmSpvcVccReleaseCause 1.3.6.1.4.1.1751.2.18.6.32.1.36 integer read-only
CAUSE field value of the last RELEASE message received for this SVC.
                                   frAtmSpvcVccReleaseDiag 1.3.6.1.4.1.1751.2.18.6.32.1.37 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC.
                                   frAtmSpvcVccRelease 1.3.6.1.4.1.1751.2.18.6.32.1.38 integer read-write
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                                   frAtmSpvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.6.32.1.39 integer32 read-only
Cells encoded on side A- (High order portion)
                                   frAtmSpvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.6.32.1.40 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   frAtmSpvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.6.32.1.41 integer32 read-only
Cells decoded on side A- (High order portion)
                                   frAtmSpvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.6.32.1.42 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   frAtmSpvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.6.32.1.43 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmSpvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.6.32.1.44 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmSpvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.6.32.1.45 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmSpvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.6.32.1.46 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmSpvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.6.32.1.47 integer32 read-only
Number of seconds stats have been collecting
                                   frAtmSpvcVccStatsFramesDroppedA 1.3.6.1.4.1.1751.2.18.6.32.1.48 integer32 read-only
Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side.
                                   frAtmSpvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.6.32.1.49 integer32 read-only
Cells encoded on side A- (High order portion)
                                   frAtmSpvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.6.32.1.50 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   frAtmSpvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.6.32.1.51 integer32 read-only
Cells decoded on side A- (High order portion)
                                   frAtmSpvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.6.32.1.52 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   frAtmSpvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.32.1.53 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmSpvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.32.1.54 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmSpvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.32.1.55 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmSpvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.32.1.56 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmSpvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.6.32.1.57 integer32 read-only
Number of seconds since odometer was reset.
                                   frAtmSpvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.6.32.1.58 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   frAtmSpvcVccStatsAal5ErrFramesA 1.3.6.1.4.1.1751.2.18.6.32.1.59 integer32 read-only
Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side
                                   frAtmSpvcVccStatsFramesTaggedA 1.3.6.1.4.1.1751.2.18.6.32.1.60 integer32 read-only
Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side
                                   frAtmSpvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.6.32.1.61 integer32 read-only
Cells Dropped on the Incoming side of B
                                   frAtmSpvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.6.32.1.62 integer32 read-only
Cells Tagged on the Incoming side of B
                                   frAtmSpvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.32.1.63 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                   frAtmSpvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.32.1.64 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   frAtmSpvcVccPriority 1.3.6.1.4.1.1751.2.18.6.32.1.65 integer read-write
Priority of SPVC - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                         atmAtmSpvcVccTable 1.3.6.1.4.1.1751.2.18.6.33 no-access
Table of SPVC ATM virtual channel connections.
                               atmAtmSpvcVccEntry 1.3.6.1.4.1.1751.2.18.6.33.1 no-access
Row definition of ATM SPVC VCC connections.
                                   atmAtmSpvcVccVpiA 1.3.6.1.4.1.1751.2.18.6.33.1.1 integer no-access
VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   atmAtmSpvcVccVciA 1.3.6.1.4.1.1751.2.18.6.33.1.2 integer no-access
VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   atmAtmSpvcVccRemoteAtmPortAddr 1.3.6.1.4.1.1751.2.18.6.33.1.3 octet string no-access
Remote ATM port NSAP address, not meaningful if passive type of connection.
                                   atmAtmSpvcVccIfB 1.3.6.1.4.1.1751.2.18.6.33.1.4 intfindex read-only
Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   atmAtmSpvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.33.1.5 integer read-only
VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   atmAtmSpvcVccVciB 1.3.6.1.4.1.1751.2.18.6.33.1.6 integer read-only
VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   atmAtmSpvcVccServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.33.1.7 integer read-write
Service type, ATM port. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   atmAtmSpvcVccSarTypeA2B 1.3.6.1.4.1.1751.2.18.6.33.1.8 integer read-write
SAR type used in ATM adaption, ATM port. Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                   atmAtmSpvcVccPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.33.1.9 integer32 read-write
Peak cell rate - side A, ATM port, in cells per second.
                                   atmAtmSpvcVccSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.33.1.10 integer32 read-write
Sustained cell rate - side A, ATM port, in cells per second.
                                   atmAtmSpvcVccMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.33.1.11 integer32 read-write
Maximum burst size - side A, ATM port, in cells per second.
                                   atmAtmSpvcVccFrwdErrCorrectionA2B 1.3.6.1.4.1.1751.2.18.6.33.1.12 integer read-write
Forward error correction scheme, ATM port side. Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   atmAtmSpvcVccServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.33.1.13 integer read-write
Service type, ATM trunk side. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   atmAtmSpvcVccSarTypeB2A 1.3.6.1.4.1.1751.2.18.6.33.1.14 integer read-write
SAR type used in ATM adaption, ATM trunk side. Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                   atmAtmSpvcVccPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.33.1.15 integer32 read-write
Peak cell rate - side B, ATM trunk, in cells per second.
                                   atmAtmSpvcVccSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.33.1.16 integer32 read-write
Sustained cell rate - side B, ATM trunk, in cells per second.
                                   atmAtmSpvcVccMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.33.1.17 integer32 read-write
Maximum burst size - side A, ATM trunk, in cells per second.
                                   atmAtmSpvcVccFrwdErrCorrectionB2A 1.3.6.1.4.1.1751.2.18.6.33.1.18 integer read-write
Forward error correction scheme, ATM trunk side. Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   atmAtmSpvcVccFlow 1.3.6.1.4.1.1751.2.18.6.33.1.19 integer read-write
Type of flow, pointToMultipointA2B is for future support. Enumeration: 'duplex': 1, 'simplexB2A': 4, 'pointToMultipointB2A': 5, 'simplexA2B': 2, 'pointToMultipointA2B': 3.
                                   atmAtmSpvcVccType 1.3.6.1.4.1.1751.2.18.6.33.1.20 integer read-write
Type of connection. Enumeration: 'secured': 2, 'nonsecured': 1.
                                   atmAtmSpvcVccConnType 1.3.6.1.4.1.1751.2.18.6.33.1.21 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   atmAtmSpvcVccLeafReference 1.3.6.1.4.1.1751.2.18.6.33.1.22 integer read-only
An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1.
                                   atmAtmSpvcVccOperStatus 1.3.6.1.4.1.1751.2.18.6.33.1.23 integer read-only
The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'waitingForRetryTimer': 8, 'waitingForCall': 7, 'noAddressSupplied': 5.
                                   atmAtmSpvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.33.1.24 rowstatus read-write
Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released.
                                   atmAtmSpvcVccRemoteSelectType 1.3.6.1.4.1.1751.2.18.6.33.1.25 integer read-write
Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmAtmSpvcVccRemoteVpi and atmAtmSpvcVccRemoteVci, must be supplied and are used at the destination. Enumeration: 'required': 1, 'any': 2.
                                   atmAtmSpvcVccRemoteVpi 1.3.6.1.4.1.1751.2.18.6.33.1.26 integer read-write
VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   atmAtmSpvcVccRemoteVci 1.3.6.1.4.1.1751.2.18.6.33.1.27 integer read-write
VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant.
                                   atmAtmSpvcVccRetryInterval 1.3.6.1.4.1.1751.2.18.6.33.1.28 integer read-write
The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately.
                                   atmAtmSpvcVccRetryLimit 1.3.6.1.4.1.1751.2.18.6.33.1.29 integer read-write
A maximum limit on how many retries should be attempted. A value of 0 indicates no limit.
                                   atmAtmSpvcVccRestart 1.3.6.1.4.1.1751.2.18.6.33.1.30 integer read-write
The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. Enumeration: 'noop': 2, 'restart': 1.
                                   atmAtmSpvcVccRetryFailure 1.3.6.1.4.1.1751.2.18.6.33.1.31 integer32 read-only
Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted.
                                   atmAtmSpvcVccReleaseCause 1.3.6.1.4.1.1751.2.18.6.33.1.32 integer read-only
CAUSE field value of the last RELEASE message received for this SVC.
                                   atmAtmSpvcVccReleaseDiag 1.3.6.1.4.1.1751.2.18.6.33.1.33 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC.
                                   atmAtmSpvcVccRelease 1.3.6.1.4.1.1751.2.18.6.33.1.34 integer read-only
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                                   atmAtmSpvcVccStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.6.33.1.35 integer32 read-only
Valid Cells received on A - (High order portion)
                                   atmAtmSpvcVccStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.6.33.1.36 integer32 read-only
Valid Cells received on A - (Low order portion)
                                   atmAtmSpvcVccStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.6.33.1.37 integer32 read-only
Valid cells transmitted on A -(High order portion)
                                   atmAtmSpvcVccStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.6.33.1.38 integer32 read-only
Valid cells transmitted on A -(Low order portion)
                                   atmAtmSpvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.6.33.1.39 integer32 read-only
Valid Cells received on B - (High order portion)
                                   atmAtmSpvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.6.33.1.40 integer32 read-only
Valid Cells received on B - (Low order portion)
                                   atmAtmSpvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.6.33.1.41 integer32 read-only
Valid cells transmitted on B -(High order portion)
                                   atmAtmSpvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.6.33.1.42 integer32 read-only
Valid cells transmitted on B -(Low order portion)
                                   atmAtmSpvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.6.33.1.43 integer32 read-only
Number of seconds stats have been collecting
                                   atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B 1.3.6.1.4.1.1751.2.18.6.33.1.44 integer read-only
Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                   atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A 1.3.6.1.4.1.1751.2.18.6.33.1.45 integer read-only
Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                   atmAtmSpvcVccStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.6.33.1.46 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmAtmSpvcVccStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.6.33.1.47 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVccStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.6.33.1.48 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVccStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.6.33.1.49 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.33.1.50 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmAtmSpvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.33.1.51 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.33.1.52 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.33.1.53 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.6.33.1.54 integer32 read-only
Number of seconds since odometer was reset.
                                   atmAtmSpvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.6.33.1.55 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   atmAtmSpvcVccViA 1.3.6.1.4.1.1751.2.18.6.33.1.56 integer read-write
VI to associate the Egress part of the B2A connection .
                                   atmAtmSpvcVccViB 1.3.6.1.4.1.1751.2.18.6.33.1.57 integer read-write
VI to associate the Egress part of the A2B connection .
                                   atmAtmSpvcVccStatsCellsDroppedA 1.3.6.1.4.1.1751.2.18.6.33.1.58 integer32 read-only
Cells Dropped on the Incoming side of A
                                   atmAtmSpvcVccStatsCellsTaggedA 1.3.6.1.4.1.1751.2.18.6.33.1.59 integer32 read-only
Cells Tagged on the Incoming side of A
                                   atmAtmSpvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.6.33.1.60 integer32 read-only
Cells Dropped on the Incoming side of B
                                   atmAtmSpvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.6.33.1.61 integer32 read-only
Cells Tagged on the Incoming side of B
                                   atmAtmSpvcVccVUNIA 1.3.6.1.4.1.1751.2.18.6.33.1.62 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                   atmAtmSpvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.33.1.63 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   atmAtmSpvcVccTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.33.1.64 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmAtmSpvcVccTrafficShapingB2A 1.3.6.1.4.1.1751.2.18.6.33.1.65 integer read-write
Traffic Shaping Support in the B2A direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmAtmSpvcVccPriority 1.3.6.1.4.1.1751.2.18.6.33.1.66 integer read-write
Priority of SPVC - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                         cirAtmSpvcVccTable 1.3.6.1.4.1.1751.2.18.6.34 no-access
Table of Circuit Emulation to ATM Soft PVCs.
                               cirAtmSpvcVccEntry 1.3.6.1.4.1.1751.2.18.6.34.1 no-access
Row definition of circuit emulation to ATM SPVC connections.
                                   cirAtmSpvcVccRemoteCePortAddr 1.3.6.1.4.1.1751.2.18.6.34.1.1 octet string no-access
The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated.
                                   cirAtmSpvcVccIfB 1.3.6.1.4.1.1751.2.18.6.34.1.2 intfindex read-only
Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   cirAtmSpvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.34.1.3 integer read-only
VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   cirAtmSpvcVccVciB 1.3.6.1.4.1.1751.2.18.6.34.1.4 integer read-only
VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   cirAtmSpvcVccVoiceCompressionA2B 1.3.6.1.4.1.1751.2.18.6.34.1.5 integer read-write
Voice Compression Algorithm Enumeration: 'none': 1, 'g729a-8k': 6, 'g726-40k': 5, 'g726-32k': 4, 'g726-16k': 2, 'g726-24k': 3.
                                   cirAtmSpvcVccSilenceDetectionA2B 1.3.6.1.4.1.1751.2.18.6.34.1.6 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   cirAtmSpvcVccEchoCancellationA2B 1.3.6.1.4.1.1751.2.18.6.34.1.7 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   cirAtmSpvcVccCngToneDetectionA2B 1.3.6.1.4.1.1751.2.18.6.34.1.8 integer read-write
Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM Enumeration: 'disabled': 1, 'bypass': 2, 'g726-32k': 3.
                                   cirAtmSpvcVccCodingTranslationA2B 1.3.6.1.4.1.1751.2.18.6.34.1.9 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   cirAtmSpvcVccVoiceCompressionB2A 1.3.6.1.4.1.1751.2.18.6.34.1.10 integer read-write
Voice Compression Algorithm Enumeration: 'none': 1, 'g729a-8k': 6, 'g726-40k': 5, 'g726-32k': 4, 'g726-16k': 2, 'g726-24k': 3.
                                   cirAtmSpvcVccSilenceDetectionB2A 1.3.6.1.4.1.1751.2.18.6.34.1.11 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   cirAtmSpvcVccEchoCancellationB2A 1.3.6.1.4.1.1751.2.18.6.34.1.12 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   cirAtmSpvcVccCngToneDetectionB2A 1.3.6.1.4.1.1751.2.18.6.34.1.13 integer read-write
Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM Enumeration: 'disabled': 1, 'bypass': 2, 'g726-32k': 3.
                                   cirAtmSpvcVccCodingTranslationB2A 1.3.6.1.4.1.1751.2.18.6.34.1.14 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   cirAtmSpvcVccFlow 1.3.6.1.4.1.1751.2.18.6.34.1.15 integer read-write
Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support. Enumeration: 'duplex': 1, 'simplexB2A': 3, 'pointToMultipointB2A': 5, 'simplexA2B': 2, 'pointToMultipointA2B': 4.
                                   cirAtmSpvcVccServiceType 1.3.6.1.4.1.1751.2.18.6.34.1.16 integer read-write
service type Enumeration: 'cbr-3': 3, 'cbr-2': 2, 'cbr-4': 4.
                                   cirAtmSpvcVccConnType 1.3.6.1.4.1.1751.2.18.6.34.1.17 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   cirAtmSpvcVccOperStatus 1.3.6.1.4.1.1751.2.18.6.34.1.18 integer read-only
other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'waitingForRetryTimer': 8, 'waitingForCall': 7, 'noAddressSupplied': 5.
                                   cirAtmSpvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.34.1.19 rowstatus read-write
Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released.
                                   cirAtmSpvcVccViB 1.3.6.1.4.1.1751.2.18.6.34.1.20 integer read-write
VI to associate the Egress part of the B2A connection .
                                   cirAtmSpvcVccRetryInterval 1.3.6.1.4.1.1751.2.18.6.34.1.21 integer read-write
The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately.
                                   cirAtmSpvcVccRetryLimit 1.3.6.1.4.1.1751.2.18.6.34.1.22 integer read-write
A maximum limit on how many retries. 0 indicates no limit.
                                   cirAtmSpvcVccRestart 1.3.6.1.4.1.1751.2.18.6.34.1.23 integer read-write
restart, the active SVC is released if necessary and a new setup procedure is begun; or noop Enumeration: 'noop': 2, 'restart': 1.
                                   cirAtmSpvcVccRetryFailure 1.3.6.1.4.1.1751.2.18.6.34.1.24 integer32 read-only
Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted.
                                   cirAtmSpvcVccReleaseCause 1.3.6.1.4.1.1751.2.18.6.34.1.25 integer read-only
CAUSE field value of the last RELEASE message received for this SVC.
                                   cirAtmSpvcVccReleaseDiag 1.3.6.1.4.1.1751.2.18.6.34.1.26 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC.
                                   cirAtmSpvcVccRelease 1.3.6.1.4.1.1751.2.18.6.34.1.27 integer read-only
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                                   cirAtmSpvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.6.34.1.28 integer32 read-only
Cells encoded on side A- (High order portion )
                                   cirAtmSpvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.6.34.1.29 integer32 read-only
Cells encoded on side A - ( Low order portion)
                                   cirAtmSpvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.6.34.1.30 integer32 read-only
Cells decoded on side A - ( High order portion)
                                   cirAtmSpvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.6.34.1.31 integer32 read-only
Cells decoded on side A - (Low order portion)
                                   cirAtmSpvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.6.34.1.32 integer32 read-only
Valid Cells received on B - (High order portion)
                                   cirAtmSpvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.6.34.1.33 integer32 read-only
Valid Cells received on B - (Low order portion)
                                   cirAtmSpvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.6.34.1.34 integer32 read-only
Valid cells transmitted on B- (High order portion)
                                   cirAtmSpvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.6.34.1.35 integer32 read-only
Valid cells transmitted on B -(Low order portion)
                                   cirAtmSpvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.6.34.1.36 integer32 read-only
Number of seconds since stats have been collecting
                                   cirAtmSpvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.6.34.1.37 integer32 read-only
Cells encoded on side A- (High order portion)
                                   cirAtmSpvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.6.34.1.38 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   cirAtmSpvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.6.34.1.39 integer32 read-only
Cells decoded on side A- (High order portion)
                                   cirAtmSpvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.6.34.1.40 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   cirAtmSpvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.34.1.41 integer32 read-only
Valid cells received (Input Billing Count)
                                   cirAtmSpvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.34.1.42 integer32 read-only
Valid cells received (Input Billing Count)
                                   cirAtmSpvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.34.1.43 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   cirAtmSpvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.34.1.44 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   cirAtmSpvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.6.34.1.45 integer32 read-only
Number of seconds since odometer was reset.
                                   cirAtmSpvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.6.34.1.46 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   cirAtmSpvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.6.34.1.47 integer32 read-only
Cells Dropped on the Incoming side of B
                                   cirAtmSpvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.6.34.1.48 integer32 read-only
Cells Tagged on the Incoming side of B
                                   cirAtmSpvcVccVUNIB 1.3.6.1.4.1.1751.2.18.6.34.1.49 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                   cirAtmSpvcVccSarTypeB 1.3.6.1.4.1.1751.2.18.6.34.1.50 integer read-write
This field will only be used when selecting voice compression, in other cases it will be set to aal1. Enumeration: 'aal2': 2, 'aal1': 1.
                                   cirAtmSpvcVccPriority 1.3.6.1.4.1.1751.2.18.6.34.1.51 integer read-write
Priority of SPVC - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                         vbrAtmSpvcTable 1.3.6.1.4.1.1751.2.18.6.35 no-access
Table of SPVC atm virtual channel connections
                               vbrAtmSpvcEntry 1.3.6.1.4.1.1751.2.18.6.35.1 no-access
Row definition of atm SPVC VCC connections
                                   vbrAtmSpvcRemoteVbrPortAddr 1.3.6.1.4.1.1751.2.18.6.35.1.1 octet string no-access
remote VBR port nsap address implemening IWF, not meaningful if passive type of connection
                                   vbrAtmSpvcIfB 1.3.6.1.4.1.1751.2.18.6.35.1.2 intfindex read-only
Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   vbrAtmSpvcVpiB 1.3.6.1.4.1.1751.2.18.6.35.1.3 integer read-only
VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                   vbrAtmSpvcVciB 1.3.6.1.4.1.1751.2.18.6.35.1.4 integer read-only
VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                   vbrAtmSpvcServiceType 1.3.6.1.4.1.1751.2.18.6.35.1.5 integer read-write
service type Enumeration: 'vbr-rt1': 4, 'vbr-rt2': 5, 'ubr': 1, 'vbr-nrt2': 3, 'vbr-nrt1': 2, 'vbr-express': 6.
                                   vbrAtmSpvcPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.35.1.6 integer32 read-write
peak cell rate - side A, in cell per second
                                   vbrAtmSpvcSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.35.1.7 integer32 read-write
sustained rate - side A, in cell per second
                                   vbrAtmSpvcMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.35.1.8 integer32 read-write
maximum burst size - side A, in cells
                                   vbrAtmSpvcPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.35.1.9 integer32 read-write
peak rate - side B, ATM trunk, in cell per second.
                                   vbrAtmSpvcSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.35.1.10 integer32 read-write
sustained rate - side B, ATM trunk, in cell per second.
                                   vbrAtmSpvcMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.35.1.11 integer32 read-write
maximum burst size - side B, ATM trunk, in cells.
                                   vbrAtmSpvcFlow 1.3.6.1.4.1.1751.2.18.6.35.1.12 integer read-write
type of flow Enumeration: 'duplex': 1, 'simplexB2A': 3, 'simplexA2B': 2.
                                   vbrAtmSpvcConnType 1.3.6.1.4.1.1751.2.18.6.35.1.13 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   vbrAtmSpvcOperStatus 1.3.6.1.4.1.1751.2.18.6.35.1.14 integer read-only
other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'waitingForRetryTimer': 8, 'waitingForCall': 7, 'noAddressSupplied': 5.
                                   vbrAtmSpvcRowStatus 1.3.6.1.4.1.1751.2.18.6.35.1.15 rowstatus read-write
Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released.
                                   vbrAtmSpvcViB 1.3.6.1.4.1.1751.2.18.6.35.1.16 integer read-write
VI to associate the Egress part of the B2A connection .
                                   vbrAtmSpvcRetryInterval 1.3.6.1.4.1.1751.2.18.6.35.1.17 integer read-write
the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately.
                                   vbrAtmSpvcRetryLimit 1.3.6.1.4.1.1751.2.18.6.35.1.18 integer read-write
a maximum limit on how many retries. 0 indicates no limit.
                                   vbrAtmSpvcRestart 1.3.6.1.4.1.1751.2.18.6.35.1.19 integer read-write
restart, the active SVC is released if necessary and a new setup procedure is begun; or noop Enumeration: 'noop': 2, 'restart': 1.
                                   vbrAtmSpvcRetryFailure 1.3.6.1.4.1.1751.2.18.6.35.1.20 integer32 read-only
indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted.
                                   vbrAtmSpvcReleaseCause 1.3.6.1.4.1.1751.2.18.6.35.1.21 integer read-only
CAUSE field value of the last RELEASE message received for this SVC
                                   vbrAtmSpvcReleaseDiag 1.3.6.1.4.1.1751.2.18.6.35.1.22 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC
                                   vbrAtmSpvcRelease 1.3.6.1.4.1.1751.2.18.6.35.1.23 integer read-only
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                                   vbrAtmSpvcStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.6.35.1.24 integer32 read-only
Cells encoded on side A- (High order portion)
                                   vbrAtmSpvcStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.6.35.1.25 integer32 read-only
ells encoded on side A - (Low order portion)
                                   vbrAtmSpvcStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.6.35.1.26 integer32 read-only
Cells decoded on side A - (High order portion)
                                   vbrAtmSpvcStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.6.35.1.27 integer32 read-only
Cells decoded on side A - (Low order portion)
                                   vbrAtmSpvcStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.6.35.1.28 integer32 read-only
Valid Cells received on B - (High order portion)
                                   vbrAtmSpvcStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.6.35.1.29 integer32 read-only
Valid Cells received on B - (Low order portion)
                                   vbrAtmSpvcStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.6.35.1.30 integer32 read-only
Valid cells transmitted on B -(High order portion)
                                   vbrAtmSpvcStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.6.35.1.31 integer32 read-only
Valid cells transmitted on B - (Low order portion)
                                   vbrAtmSpvcStatsTimer 1.3.6.1.4.1.1751.2.18.6.35.1.32 integer32 read-only
Number of seconds stats have been collecting
                                   vbrAtmSpvcStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.6.35.1.33 integer32 read-only
Cells encoded on side A- (High order portion)
                                   vbrAtmSpvcStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.6.35.1.34 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   vbrAtmSpvcStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.6.35.1.35 integer32 read-only
Cells decoded on side A- (High order portion)
                                   vbrAtmSpvcStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.6.35.1.36 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   vbrAtmSpvcStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.35.1.37 integer32 read-only
Valid Cells received on B - (High order portion)
                                   vbrAtmSpvcStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.35.1.38 integer32 read-only
Valid Cells received on B - (Low order portion)
                                   vbrAtmSpvcStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.35.1.39 integer32 read-only
Valid Cells transmitted on B -(High order portion)
                                   vbrAtmSpvcStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.35.1.40 integer32 read-only
Valid Cells transmitted on B -(Low order portion)
                                   vbrAtmSpvcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.6.35.1.41 integer32 read-only
Number of seconds since odometer was reset.
                                   vbrAtmSpvcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.6.35.1.42 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   vbrAtmSpvcStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.6.35.1.43 integer32 read-only
Cells Dropped on the Incoming side of B
                                   vbrAtmSpvcStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.6.35.1.44 integer32 read-only
Cells Tagged on the Incoming side of B
                                   vbrAtmSpvcVUNIB 1.3.6.1.4.1.1751.2.18.6.35.1.45 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                   vbrAtmSpvcTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.35.1.46 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   vbrAtmSpvcPriority 1.3.6.1.4.1.1751.2.18.6.35.1.47 integer read-write
Priority of SPVC - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                         aal2TrunkConfigTable 1.3.6.1.4.1.1751.2.18.6.36 no-access
Table of terminal emulation to ATM network IWF connections
                               aal2TrunkConfigEntry 1.3.6.1.4.1.1751.2.18.6.36.1 no-access
Row definition of terminal emulation to ATM network IWF connections
                                   aal2TrunkConfigIf 1.3.6.1.4.1.1751.2.18.6.36.1.1 intfindex no-access
Interface Id of the Atm Side of the Aal2 Trunk.
                                   aal2TrunkConfigVpi 1.3.6.1.4.1.1751.2.18.6.36.1.2 integer no-access
VPI value for Atm side , the atm side, of a atm trunk connection. Valid range is a number between 0 and 4095.
                                   aal2TrunkConfigVci 1.3.6.1.4.1.1751.2.18.6.36.1.3 integer no-access
VCI value for the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535.
                                   aal2TrunkConfigServiceType 1.3.6.1.4.1.1751.2.18.6.36.1.4 integer read-write
Service/Queue types supported for Aal2 Trunk connections.When using Vbr/Ubr type service type oversubscription will have to be taken into account for which nature of traffic going over the Trunk should be known before hand Enumeration: 'vbr-rt1': 9, 'vbr-rt2': 8, 'ubr': 5, 'cbr-1': 1, 'cbr-3': 3, 'cbr-2': 2, 'cbr-4': 4, 'vbr-nrt2': 6, 'vbr-nrt1': 7, 'vbr-express': 10.
                                   aal2TrunkConfigPeakCellRateIgr 1.3.6.1.4.1.1751.2.18.6.36.1.5 integer32 read-write
peak cell rate - atm side inp, in cell per second
                                   aal2TrunkConfigSusCellRateIgr 1.3.6.1.4.1.1751.2.18.6.36.1.6 integer32 read-write
sustained rate - atm side inp, in cell per second
                                   aal2TrunkConfigMaxBurstSizeIgr 1.3.6.1.4.1.1751.2.18.6.36.1.7 integer32 read-write
maximum burst size - atm side inp, in cells
                                   aal2TrunkConfigPeakCellRateEgr 1.3.6.1.4.1.1751.2.18.6.36.1.8 integer32 read-write
peak rate - atm side output, in cell per second.
                                   aal2TrunkConfigSusCellRateEgr 1.3.6.1.4.1.1751.2.18.6.36.1.9 integer32 read-write
sustained rate - atm side output,in cell per second.
                                   aal2TrunkConfigMaxBurstSizeEgr 1.3.6.1.4.1.1751.2.18.6.36.1.10 integer32 read-write
maximum burst size - atm side output, in cells.
                                   aal2TrunkConfigFlow 1.3.6.1.4.1.1751.2.18.6.36.1.11 integer read-write
Flow type Enumeration: 'duplex': 1.
                                   aal2TrunkConfigRowStatus 1.3.6.1.4.1.1751.2.18.6.36.1.12 rowstatus read-write
row status
                                   aal2TrunkConfigConnectionStatus 1.3.6.1.4.1.1751.2.18.6.36.1.13 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated . InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactiveB2A': 5, 'inactive': 2, 'inactiveA2B-B2A': 3, 'inactiveA2B': 4.
                                   aal2TrunkConfigViB 1.3.6.1.4.1.1751.2.18.6.36.1.14 integer read-write
VI to associate the Egress part of the A2B connection .
                                   aal2TrunkConfigCnfrmTypeB2A 1.3.6.1.4.1.1751.2.18.6.36.1.15 integer read-write
The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. Enumeration: 'best-effort-tag': 6, 'best-effort': 1, 'two-bucket-notag-0plus1-0': 4, 'two-bucket-tag-0plus1-0': 5, 'two-bucket-notag-0plus1-0plus1': 3, 'one-bucket-notag-0plus1': 2.
                                   aal2TrunkConfigVUNIB 1.3.6.1.4.1.1751.2.18.6.36.1.16 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   aal2TrunkAvailBwIgr 1.3.6.1.4.1.1751.2.18.6.36.1.17 integer32 read-only
The Avail Bandwidth for that interface in cells per sec.
                                   aal2TrunkAvailBwEgr 1.3.6.1.4.1.1751.2.18.6.36.1.18 integer32 read-only
The Avail Bandwidth for that interface in cells per sec.
                                   aal2TrunkGR303 1.3.6.1.4.1.1751.2.18.6.36.1.19 integer read-write
This flag is used to check if a GR303 Feature is enabled for the trunk. Enumeration: 'disabled': 1, 'enabled': 2.
                                   aal2TrunkConfigOamStatus 1.3.6.1.4.1.1751.2.18.6.36.1.20 integer read-write
Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: A side is both an end point and a segment point. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                                   aal2TrunkConnFailureCauseB 1.3.6.1.4.1.1751.2.18.6.36.1.21 atmconnfailurecause read-only
connection status reason code
                                   aal2TrunkCuTimer 1.3.6.1.4.1.1751.2.18.6.36.1.22 integer read-write
CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out.
                         gr303Aal2PvcVccTable 1.3.6.1.4.1.1751.2.18.6.37 no-access
Table of Gr303 to AAL2 Cid monitor VCCs
                               gr303Aal2PvcVccEntry 1.3.6.1.4.1.1751.2.18.6.37.1 no-access
Row definition of circuit emulation to atm connections.
                                   gr303Aal2PvcVccGr303IgId 1.3.6.1.4.1.1751.2.18.6.37.1.1 integer no-access
GR303 interface group id on the GR303 side of the connection
                                   gr303Aal2PvcVccGr303CallRef 1.3.6.1.4.1.1751.2.18.6.37.1.2 integer no-access
The call reference value to be used in the signaling packets on the GR303 interface for the connection on the AAL2CID corresponding to this connection
                                   gr303Aal2PvcVccIfB 1.3.6.1.4.1.1751.2.18.6.37.1.3 intfindex no-access
Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   gr303Aal2PvcVccVpiB 1.3.6.1.4.1.1751.2.18.6.37.1.4 integer no-access
VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095.
                                   gr303Aal2PvcVccVciB 1.3.6.1.4.1.1751.2.18.6.37.1.5 integer no-access
VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535.
                                   gr303Aal2PvcVccAal2Cid 1.3.6.1.4.1.1751.2.18.6.37.1.6 integer no-access
Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2.
                                   gr303Aal2PvcVccRowStatus 1.3.6.1.4.1.1751.2.18.6.37.1.7 rowstatus read-write
row status
                                   gr303Aal2PvcVccVoiceEncodingProfile 1.3.6.1.4.1.1751.2.18.6.37.1.8 integer read-write
Profile for use by voice/voiceband data. Profile-3 and Profile-7 are ITU-T predefined profiles which specify the voice compression and silence removal algorithms. If custom profile is chosen all DSP specific parameters have to be specified by the user. If default profile is chosen all parameters on the AAL2 trunk, containing this CID, will be used. Enumeration: 'af-profile-10': 11, 'itut-profile-3': 3, 'af-profile-12': 12, 'default': 257, 'custom': 256, 'itut-profile-7': 7, 'itut-profile-1': 1, 'af-profile-8': 9, 'af-profile-9': 10, 'af-profile-6': 6, 'af-profile-7': 8.
                                   gr303Aal2PvcVccVoiceCompression 1.3.6.1.4.1.1751.2.18.6.37.1.9 integer read-write
Voice Compression Algorithm Enumeration: 'none': 1, 'g729a-8k': 6, 'g726-40k': 5, 'g726-32k': 4, 'g726-16k': 2, 'g726-24k': 3.
                                   gr303Aal2PvcVccSilenceDetection 1.3.6.1.4.1.1751.2.18.6.37.1.10 integer read-write
silence detection off/on Enumeration: 'disabled': 1, 'enabled': 2.
                                   gr303Aal2PvcVccEchoCancellation 1.3.6.1.4.1.1751.2.18.6.37.1.11 integer read-write
Echo Cancellation Algorithm Enumeration: 'none': 1, 'g168': 3, 'g165-nearEnd': 2.
                                   gr303Aal2PvcVccCngToneDetection 1.3.6.1.4.1.1751.2.18.6.37.1.12 integer read-write
Calling Tone Detection Algorithm Enumeration: 'disabled': 1, 'bypass': 2.
                                   gr303Aal2PvcVccCodingTranslation 1.3.6.1.4.1.1751.2.18.6.37.1.13 integer read-write
Coding rule translation type. Enumeration: 'aLaw2aLaw': 3, 'none': 1, 'muLaw2muLaw': 2, 'aLaw2muLaw': 5, 'muLaw2aLaw': 4.
                                   gr303Aal2PvcVccConnectionStatus 1.3.6.1.4.1.1751.2.18.6.37.1.14 integer read-only
Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority. Enumeration: 'active': 1, 'inactive': 2.
                                   gr303Aal2PvcVccAltLineType 1.3.6.1.4.1.1751.2.18.6.37.1.15 integer read-write
Analog Line Termination Line Type on the subscriber side. The ABCD bit codes for diffterent signal types depend on the analog line type. The analog type can be overwritten by an EOC message from the IDT Enumeration: 'alt-winkStart': 29, 'alt-loopStart': 13, 'alt-groundStart': 9, 'alt-LoopReverseBattery': 1.
                         atmAtmSpvcVpcTable 1.3.6.1.4.1.1751.2.18.6.38 no-access
Table of SPVC ATM virtual path connections.
                               atmAtmSpvcVpcEntry 1.3.6.1.4.1.1751.2.18.6.38.1 no-access
Row definition of ATM SPVC VPC connections.
                                   atmAtmSpvcVpcVpiA 1.3.6.1.4.1.1751.2.18.6.38.1.1 integer no-access
VPI value for side A of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095.
                                   atmAtmSpvcVpcRemoteAtmPortAddr 1.3.6.1.4.1.1751.2.18.6.38.1.2 octet string no-access
Remote ATM port NSAP address, not meaningful if passive type of connection.
                                   atmAtmSpvcVpcIfB 1.3.6.1.4.1.1751.2.18.6.38.1.3 intfindex read-only
Interface index for side B of an ATM SPVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the path number.
                                   atmAtmSpvcVpcVpiB 1.3.6.1.4.1.1751.2.18.6.38.1.4 integer read-only
VPI value for side B of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095.
                                   atmAtmSpvcVpcServiceTypeA2B 1.3.6.1.4.1.1751.2.18.6.38.1.5 integer read-write
Service type, ATM port. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   atmAtmSpvcVpcSarTypeA2B 1.3.6.1.4.1.1751.2.18.6.38.1.6 integer read-write
SAR type used in ATM adaption, ATM port. Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                   atmAtmSpvcVpcPeakCellRateA2B 1.3.6.1.4.1.1751.2.18.6.38.1.7 integer32 read-write
Peak cell rate - side A, ATM port, in cells per second.
                                   atmAtmSpvcVpcSusCellRateA2B 1.3.6.1.4.1.1751.2.18.6.38.1.8 integer32 read-write
Sustained cell rate - side A, ATM port, in cells per second.
                                   atmAtmSpvcVpcMaxBurstSizeA2B 1.3.6.1.4.1.1751.2.18.6.38.1.9 integer32 read-write
Maximum burst size - side A, ATM port, in cells per second.
                                   atmAtmSpvcVpcFrwdErrCorrectionA2B 1.3.6.1.4.1.1751.2.18.6.38.1.10 integer read-write
Forward error correction scheme, ATM port side. Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   atmAtmSpvcVpcServiceTypeB2A 1.3.6.1.4.1.1751.2.18.6.38.1.11 integer read-write
Service type, ATM trunk side. Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                                   atmAtmSpvcVpcSarTypeB2A 1.3.6.1.4.1.1751.2.18.6.38.1.12 integer read-write
SAR type used in ATM adaption, ATM trunk side. Enumeration: 'aal2': 3, 'null': 5, 'aal1': 4, 'aal3-4': 2, 'aal5': 1.
                                   atmAtmSpvcVpcPeakCellRateB2A 1.3.6.1.4.1.1751.2.18.6.38.1.13 integer32 read-write
Peak cell rate - side B, ATM trunk, in cells per second.
                                   atmAtmSpvcVpcSusCellRateB2A 1.3.6.1.4.1.1751.2.18.6.38.1.14 integer32 read-write
Sustained cell rate - side B, ATM trunk, in cells per second.
                                   atmAtmSpvcVpcMaxBurstSizeB2A 1.3.6.1.4.1.1751.2.18.6.38.1.15 integer32 read-write
Maximum burst size - side A, ATM trunk, in cells per second.
                                   atmAtmSpvcVpcFrwdErrCorrectionB2A 1.3.6.1.4.1.1751.2.18.6.38.1.16 integer read-write
Forward error correction scheme, ATM trunk side. Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   atmAtmSpvcVpcFlow 1.3.6.1.4.1.1751.2.18.6.38.1.17 integer read-write
Type of flow, pointToMultipointA2B is for future support. Enumeration: 'duplex': 1, 'simplexB2A': 4, 'pointToMultipointB2A': 5, 'simplexA2B': 2, 'pointToMultipointA2B': 3.
                                   atmAtmSpvcVpcType 1.3.6.1.4.1.1751.2.18.6.38.1.18 integer read-write
Type of connection. Enumeration: 'secured': 2, 'nonsecured': 1.
                                   atmAtmSpvcVpcConnType 1.3.6.1.4.1.1751.2.18.6.38.1.19 integer read-write
The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. Enumeration: 'activeSvc': 1, 'passiveSvc': 2.
                                   atmAtmSpvcVpcLeafReference 1.3.6.1.4.1.1751.2.18.6.38.1.20 integer read-only
An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1.
                                   atmAtmSpvcVpcOperStatus 1.3.6.1.4.1.1751.2.18.6.38.1.21 integer read-only
The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational. Enumeration: 'lowerLayerDown': 6, 'establishmentInProgress': 2, 'retriesExhausted': 4, 'other': 1, 'connected': 3, 'waitingForRetryTimer': 8, 'waitingForCall': 7, 'noAddressSupplied': 5.
                                   atmAtmSpvcVpcRowStatus 1.3.6.1.4.1.1751.2.18.6.38.1.22 rowstatus read-write
Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released.
                                   atmAtmSpvcVpcRemoteSelectType 1.3.6.1.4.1.1751.2.18.6.38.1.23 integer read-write
Indicates whether the remote VPI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmAtmSpvcVpcRemoteVpi and must be supplied and are used at the destination. Enumeration: 'required': 1, 'any': 2.
                                   atmAtmSpvcVpcRemoteVpi 1.3.6.1.4.1.1751.2.18.6.38.1.24 integer read-write
VPI value to be used at the destination of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVpcRemoteSelectType is configured as 'any', then this value is not relevant.
                                   atmAtmSpvcVpcRetryInterval 1.3.6.1.4.1.1751.2.18.6.38.1.25 integer read-write
The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately.
                                   atmAtmSpvcVpcRetryLimit 1.3.6.1.4.1.1751.2.18.6.38.1.26 integer read-write
A maximum limit on how many retries should be attempted. A value of 0 indicates no limit.
                                   atmAtmSpvcVpcRestart 1.3.6.1.4.1.1751.2.18.6.38.1.27 integer read-write
The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. Enumeration: 'noop': 2, 'restart': 1.
                                   atmAtmSpvcVpcRetryFailure 1.3.6.1.4.1.1751.2.18.6.38.1.28 integer32 read-only
Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted.
                                   atmAtmSpvcVpcReleaseCause 1.3.6.1.4.1.1751.2.18.6.38.1.29 integer read-only
CAUSE field value of the last RELEASE message received for this SVC.
                                   atmAtmSpvcVpcReleaseDiag 1.3.6.1.4.1.1751.2.18.6.38.1.30 octet string read-only
DIAGNOSTICS field value of the last RELEASE message received for this SVC.
                                   atmAtmSpvcVpcRelease 1.3.6.1.4.1.1751.2.18.6.38.1.31 integer read-only
Release the connnection established on the endpoint and if the endpoint is Active, do not retry. Enumeration: 'release': 1, 'noop': 2.
                                   atmAtmSpvcVpcStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.6.38.1.32 integer32 read-only
Valid Cells received on A - (High order portion)
                                   atmAtmSpvcVpcStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.6.38.1.33 integer32 read-only
Valid Cells received on A - (Low order portion)
                                   atmAtmSpvcVpcStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.6.38.1.34 integer32 read-only
Valid cells transmitted on A -(High order portion)
                                   atmAtmSpvcVpcStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.6.38.1.35 integer32 read-only
Valid cells transmitted on A -(Low order portion)
                                   atmAtmSpvcVpcStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.6.38.1.36 integer32 read-only
Valid Cells received on B - (High order portion)
                                   atmAtmSpvcVpcStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.6.38.1.37 integer32 read-only
Valid Cells received on B - (Low order portion)
                                   atmAtmSpvcVpcStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.6.38.1.38 integer32 read-only
Valid cells transmitted on B -(High order portion)
                                   atmAtmSpvcVpcStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.6.38.1.39 integer32 read-only
Valid cells transmitted on B -(Low order portion)
                                   atmAtmSpvcVpcStatsTimer 1.3.6.1.4.1.1751.2.18.6.38.1.40 integer32 read-only
Number of seconds stats have been collecting
                                   atmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B 1.3.6.1.4.1.1751.2.18.6.38.1.41 integer read-only
Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                   atmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A 1.3.6.1.4.1.1751.2.18.6.38.1.42 integer read-only
Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                   atmAtmSpvcVpcStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.6.38.1.43 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmAtmSpvcVpcStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.6.38.1.44 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVpcStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.6.38.1.45 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVpcStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.6.38.1.46 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVpcStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.38.1.47 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmAtmSpvcVpcStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.38.1.48 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVpcStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.6.38.1.49 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVpcStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.6.38.1.50 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmAtmSpvcVpcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.6.38.1.51 integer32 read-only
Number of seconds since odometer was reset.
                                   atmAtmSpvcVpcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.6.38.1.52 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   atmAtmSpvcVpcViA 1.3.6.1.4.1.1751.2.18.6.38.1.53 integer read-write
VI to associate the Egress part of the B2A connection .
                                   atmAtmSpvcVpcViB 1.3.6.1.4.1.1751.2.18.6.38.1.54 integer read-write
VI to associate the Egress part of the A2B connection .
                                   atmAtmSpvcVpcStatsCellsDroppedA 1.3.6.1.4.1.1751.2.18.6.38.1.55 integer32 read-only
Cells Dropped on the Incoming side of A
                                   atmAtmSpvcVpcStatsCellsTaggedA 1.3.6.1.4.1.1751.2.18.6.38.1.56 integer32 read-only
Cells Tagged on the Incoming side of A
                                   atmAtmSpvcVpcStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.6.38.1.57 integer32 read-only
Cells Dropped on the Incoming side of B
                                   atmAtmSpvcVpcStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.6.38.1.58 integer32 read-only
Cells Tagged on the Incoming side of B
                                   atmAtmSpvcVpcVUNIA 1.3.6.1.4.1.1751.2.18.6.38.1.59 integer read-write
VUNI to associate the Egress part of the B2A connection .
                                   atmAtmSpvcVpcVUNIB 1.3.6.1.4.1.1751.2.18.6.38.1.60 integer read-write
VUNI to associate the Egress part of the A2B connection .
                                   atmAtmSpvcVpcTrafficShapingA2B 1.3.6.1.4.1.1751.2.18.6.38.1.61 integer read-write
Traffic Shaping Support in the A2B direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmAtmSpvcVpcTrafficShapingB2A 1.3.6.1.4.1.1751.2.18.6.38.1.62 integer read-write
Traffic Shaping Support in the B2A direction. Enumeration: 'disabled': 1, 'enabled': 2.
                                   atmAtmSpvcVpcPriority 1.3.6.1.4.1.1751.2.18.6.38.1.63 integer read-write
Priority of SPVC - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                         intfAtmPvcConnDisplayTable 1.3.6.1.4.1.1751.2.18.6.39 no-access
List of Pvc Connections on an Interface.
                               intfAtmPvcConnDisplayEntry 1.3.6.1.4.1.1751.2.18.6.39.1 no-access
Gives list of pvc going towards the backplane on a particluar interface
                                   intfAtmPvcConnDisplaySlot 1.3.6.1.4.1.1751.2.18.6.39.1.1 integer32 no-access
Slot of the particular interface
                                   intfAtmPvcConnDisplayPort 1.3.6.1.4.1.1751.2.18.6.39.1.2 integer32 no-access
Port of the particular interface
                                   intfAtmPvcConnDisplayChannel 1.3.6.1.4.1.1751.2.18.6.39.1.3 integer32 no-access
Channel of the particular interface
                                   intfAtmPvcConnDisplayVpi 1.3.6.1.4.1.1751.2.18.6.39.1.4 integer no-access
VPI value for connection on Intf Valid range is a number between 0 and 4095.
                                   intfAtmPvcConnDisplayVci 1.3.6.1.4.1.1751.2.18.6.39.1.5 integer no-access
VCI value for connection on Intf Valid range is a number between 0 and 65535.
                                   intfAtmPvcConnDisplayFlowType 1.3.6.1.4.1.1751.2.18.6.39.1.6 integer read-only
Flow type:Indicates Flow Towards the Back Plane cnctnValid: Traffic flow towards BP is enabled. cnctnNull: Traffic flow towards BP is disabled. cnctnPtmpValid: Traffic flow towards BP is enabled and it is point to multipoint connection. cnctnPtmpNull: Traffic flow towards BP is disabled and it is point to multipoint connection. Enumeration: 'cnctnValid': 1, 'cnctnPtmpNull': 4, 'cnctnNull': 2, 'cnctnPtmpValid': 3.
                     userServiceConfig 1.3.6.1.4.1.1751.2.18.7
                     sysTraps 1.3.6.1.4.1.1751.2.18.8
                         systemEvents 1.3.6.1.4.1.1751.2.18.8.1
                             systemColdStartNotify 1.3.6.1.4.1.1751.2.18.8.1.1
Info : System has successfully completed initialization from a complete power down stage and is ready for operation.
                             systemWarmStartNotify 1.3.6.1.4.1.1751.2.18.8.1.2
Info : System has successfully completed initialization from a user or other system level interrupt or restart and is ready for operation.
                             ecdBootFailureNotify 1.3.6.1.4.1.1751.2.18.8.1.3
Critical : System failed in the Boot (startup) procedures. Please call Support immediately to resolve the problem.
                             referenceClockFailNotify 1.3.6.1.4.1.1751.2.18.8.1.4
Critical : The reference clock used for the operation of the bus-based backplane has failed. Please call Support immediately to resolve the problem.
                             referenceClockClearedNotify 1.3.6.1.4.1.1751.2.18.8.1.5
Info : The error in the backplane reference clock has been corrected.
                             compositeClockFailNotify 1.3.6.1.4.1.1751.2.18.8.1.6
Critical : The composite clock has failed. Please call Support immediately to resolve the problem.
                             compositeClockClearedNotify 1.3.6.1.4.1.1751.2.18.8.1.7
Info : The error in the composite clock has been corrected.
                             stratumModeChangeNotify 1.3.6.1.4.1.1751.2.18.8.1.8
Info : The current operational status of the Stratum card has changed.
                             powerSupplyStatusNotify 1.3.6.1.4.1.1751.2.18.8.1.9
Minor : Indicates the status of the power supply.
                             softwareDownloadStatusNotify 1.3.6.1.4.1.1751.2.18.8.1.10
Info : Indicates the completion status of the ftp download of a software upgrade.
                             muxReadyConfirmReceivedNotify 1.3.6.1.4.1.1751.2.18.8.1.11
Info : Indicates that the MUX (AC 120) has received a MUX_READY_CONF message in response to the MUX_READY_IND message when the AC 120 is configured as the TCP client for the AC 120 to Signalling Gateway connection.
                             muxReadyConfirmNotReceivedNotify 1.3.6.1.4.1.1751.2.18.8.1.12
Major : If AC 120 is configured as TCP client, this trap is sent if the MUX_READY_CONF message is not received after sending the MUX_READY_IND message three times. This indicates unexpected behavior on the AC 120 to Signalling Gateway link.
                             oneWayMessageWhileInTwoWayStateNotify 1.3.6.1.4.1.1751.2.18.8.1.13
Major : This trap indicates that a one way message is received from the Signalling Gateway (SG) when the AC 120 is in the two way state of the keep-alive protocol on the TCP link between the AC 120 and the SG.
                             inactivityTimerExpiredNotify 1.3.6.1.4.1.1751.2.18.8.1.14
Major : Sent by the AC 120 when the inactivity timer of the keep-alive protocoal expires, i.e. when the AC 120 does not see a message from the Signalling Gateway on the TCP link during the time period specified by the inactivity timer value setting.
                             keepAliveTimerExpiredInLlDownStateNotify 1.3.6.1.4.1.1751.2.18.8.1.15
Major : Sent by the AC 120 when the keep-alive timer expires in the LLDOWN state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive message from the Signalling Gateway on the TCP link during the time period specified by the keep-alive timer setting.
                             keepAliveTimerExpiredInOneWayStateNotify 1.3.6.1.4.1.1751.2.18.8.1.16
Major : Sent by the AC 120 when the keep-alive timer expires in the ONE-WAY state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive message from the Signalling Gateway on the TCP link during the time period specified by the keep-alive timer setting.
                             completeClockFailedNotify 1.3.6.1.4.1.1751.2.18.8.1.17
Critical : The stratum cards have either been removed or have failed leading to no clock being provided.
                             completeClockRecoveredNotify 1.3.6.1.4.1.1751.2.18.8.1.18
Info : A stratum card is now available to provide a clock source.
                             backplaneCircuitryFailedNotify 1.3.6.1.4.1.1751.2.18.8.1.19
Critical : There is no activity on the cell bus. Please call Support immediately to resolve the problem.
                             backplaneCircuitryRecoveredNotify 1.3.6.1.4.1.1751.2.18.8.1.20
Info : The cpu card is able to detect activity on the cell bus.
                             remoteRebootNotify 1.3.6.1.4.1.1751.2.18.8.1.21
Info : Indicates the result of the requested reboot action.
                             saveConfigurationNotify 1.3.6.1.4.1.1751.2.18.8.1.22
Info : Indicates the result of the requested save configuration.
                             versionConfigurationNotify 1.3.6.1.4.1.1751.2.18.8.1.23
Info : Indicates the completion status of the upgrade or downgrade.
                             fileTransferStatusNotify 1.3.6.1.4.1.1751.2.18.8.1.24
Info : Indicates the percent complete of the current upgrade, downgrade, or ftp download in progress.
                             ipOrMaskInvalidNotify 1.3.6.1.4.1.1751.2.18.8.1.25
Response : The indicated ip address is invalid.
                             alarmCardInputChangeNotify 1.3.6.1.4.1.1751.2.18.8.1.26
Info : Indicates that the deviceId with alarmCardReasonCode has changed its status.
                             removeConfigFilesNotify 1.3.6.1.4.1.1751.2.18.8.1.27
Info : Indicates the status of the removal of the configuration files.
                             alarmCardOutputChangeNotify 1.3.6.1.4.1.1751.2.18.8.1.28
Info : Indicates that the deviceId with alarmCardReasonCode has changed its status.
                             alarmCardAcoChangeNotify 1.3.6.1.4.1.1751.2.18.8.1.29
Info : Indicates the action taken by the indicated type of the audible alarm.
                             snmpCommunityStringsChangedToPublicNotify 1.3.6.1.4.1.1751.2.18.8.1.30
Critical : An error has been detected in the agt.pty file and the community strings have been changed to be public.
                             pnniNodeCfgNotify 1.3.6.1.4.1.1751.2.18.8.1.31
Info : Indicates that a PNNI Node has been created.
                             pnniNodeCfgFailNotify 1.3.6.1.4.1.1751.2.18.8.1.32
Info : Indicates that a PNNI Node Creation has failed.
                             pnniNodeModFailNotify 1.3.6.1.4.1.1751.2.18.8.1.33
Info : Indicates that a PNNI Node Modification has failed.
                             pnniNodeDelFailNotify 1.3.6.1.4.1.1751.2.18.8.1.34
Info : Indicates that a PNNI Node Deletion has failed.
                             pnniNodeOOSFailNotify 1.3.6.1.4.1.1751.2.18.8.1.35
Info : Indicates that the action of taking a PNNI Node Out of Service has failed.
                             pnniNodeISFailNotify 1.3.6.1.4.1.1751.2.18.8.1.36
Info : Indicates that the action of bringing a PNNI Node into service has failed.
                             pnniRtAddrCfgNotify 1.3.6.1.4.1.1751.2.18.8.1.37
Info : Indicates that a new PNNI Route Address has been Created.
                             pnniRtAddrCfgFailNotify 1.3.6.1.4.1.1751.2.18.8.1.38
Info : Indicates that a PNNI Route Address Configuration has failed.
                             pnniRtAddrModFailNotify 1.3.6.1.4.1.1751.2.18.8.1.39
Info : Indicates that a PNNI Route Address Modification has failed.
                             pnniRtAddrDelFailNotify 1.3.6.1.4.1.1751.2.18.8.1.40
Info : Indicates that a PNNI Route Address Deletion has failed.
                             pnniRtAddrAddByIlmiNotify 1.3.6.1.4.1.1751.2.18.8.1.41
Info : Indicates that an end system Address has been dynamically added to PNNI by ILMI.
                             pnniRtAddrDelByIlmiNotify 1.3.6.1.4.1.1751.2.18.8.1.42
Info : Indicates that an end system Address has been dynamically deleted from PNNI by ILMI.
                             callContrlResAllocFailNotify 1.3.6.1.4.1.1751.2.18.8.1.43
Info: Indicates that the configuration of call control resource allocation fails.
                             differentSystemSoftwareNotify 1.3.6.1.4.1.1751.2.18.8.1.44
Critical: Indicates that the primary and backup cpu's are running different versions of software. This could cause system problems since the database files will not be transferred between cpu's so a change of cpu will result.
                             inputPortClockFailNotify 1.3.6.1.4.1.1751.2.18.8.1.45
Critical : The input port clock has failed. Please call Support immediately to resolve the problem.
                             inputPortClockClearedNotify 1.3.6.1.4.1.1751.2.18.8.1.46
Info : The error in the input port clock has been corrected.
                             oldStratumCardNotify 1.3.6.1.4.1.1751.2.18.8.1.47
Critical : This trap indicates that the primary stratum card does not support this mode of operation being applied in the stratum configuration. Card must be upgraded. A default configuration is being applied to stratum
                             stratumCardMismatchNotify 1.3.6.1.4.1.1751.2.18.8.1.48
Critical : Indicates that the secondary stratum card does not support this mode of operation being applied to the primary stratum. Card must be upgraded.
                             tasCmprsAnnceNotify 1.3.6.1.4.1.1751.2.18.8.1.49
Info : Indicates the result of the requested compress announcement operation.
                             tasTstLineNotify 1.3.6.1.4.1.1751.2.18.8.1.50
Info : Indicates the result of the requested line test initiation operation.
                             tasMemNotify 1.3.6.1.4.1.1751.2.18.8.1.51
Info : Indicates the result of the requested TASM memory initiation operation.
                             ambientTemperatureChangeNotify 1.3.6.1.4.1.1751.2.18.8.1.52
Info : Indicates the ambient temperature has changed by 5 degrees centigrade since the last trap message.
                             systemInsuffMemNotify 1.3.6.1.4.1.1751.2.18.8.1.53
Info : no enough memory for one or more features to be turned on.
                             toneAnnceFtpStatusNotify 1.3.6.1.4.1.1751.2.18.8.1.54
Info : Indicates the completion status of the ftp download of a tone annoucement file.
                             tasmControlBlockResAllocFailNotify 1.3.6.1.4.1.1751.2.18.8.1.55
Info: Indicates that the configuration of tasm control block resource allocation fails. Data send with the trap: tasmControlBlockAllocFailReasonCode Possible values are: res-alloc-success(1), res-alloc-Fail-announce-control-blocks-mem-unavail(2), res-alloc-Fail-digit-control-blocks-mem-unavail(3), res-alloc-Fail-line-test-control-blocks-mem-unavail(4)
                             tasmCacheMemAllocFailNotify 1.3.6.1.4.1.1751.2.18.8.1.56
Info: Indicates that the configuration of tasm memory cache for announcement caching allocation fails. Data send with the trap:tasmCacheMemAllocFailReasonCode Possible values are: res-alloc-success(1), res-alloc-Fail-announce-cache-mem-unavail(2)
                             remoteDbOperationStatusNotify 1.3.6.1.4.1.1751.2.18.8.1.57
Info : Indicates the completion status of remote database operation.
                             sapphireInterfaceAddressAssignFailNotify 1.3.6.1.4.1.1751.2.18.8.1.58
Info: Indicates that the assignment of the Sapphire interface address on which TCP connect requests are sent to SoftSwitch when PSAX is configured as Client has failed. Data send with the trap: sapphireIntfAddressFailReasonCode Possible values are: address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Illegal IP address assigned address not matching fail-not-match-InBandManagement-Switch-CPU-IP-Address(3) In-Band Management IP or Switch IP or CPU IP address fail-Switch-or-CPU-IP-Address-unconfigured(4) Switch IP or CPU IP address unconfigured fail-InBandManagement-IP-Address-unconfigured(5) InBandManagement IP address unconfigured.
                             switchAlarmStatusChangeNotify 1.3.6.1.4.1.1751.2.18.8.1.59
Critical : Trap to notify a change in the status of the alarm on the switch.
                             chassisOverTempAlarmNotify 1.3.6.1.4.1.1751.2.18.8.1.60
Critical : Trap sent when the temperature of the chassis goes above or below a preset temperature threshold.
                         moduleEvents 1.3.6.1.4.1.1751.2.18.8.2
                             cardInsertionNotify 1.3.6.1.4.1.1751.2.18.8.2.1
Info : The indicated slot has had a card inserted into it.
                             cardRemovedOrFailedNotify 1.3.6.1.4.1.1751.2.18.8.2.2
Major : The indicated slot has changed state.
                             lineStatusChangedNotify 1.3.6.1.4.1.1751.2.18.8.2.3
Major : The indicated port has had a change in the line status.
                             firmwareDownloadSucceededNotify 1.3.6.1.4.1.1751.2.18.8.2.4
Info : The indicated slot has successfully completed a firmware download.
                             firmwareDownloadFailedNotify 1.3.6.1.4.1.1751.2.18.8.2.5
Minor : The indicated slot had the indicated failure during a firmware download.
                             moduleRebootNotify 1.3.6.1.4.1.1751.2.18.8.2.6
Major : This trap indicates that a cardType in cardSlot becomes busy and the CPU reboots it. This is different from when an I/O card is actually removed.
                             oc3APSStateChangeNotify 1.3.6.1.4.1.1751.2.18.8.2.7
Notification of a change in the APS state machine.
                             oc3APSSwitchoverNotify 1.3.6.1.4.1.1751.2.18.8.2.8
Notification of a switchover in an APS pair.
                             portModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.2.9
Info : Notification that an attempt to modify an port parameters has failed.
                             stratumActivitySwitchOverNotify 1.3.6.1.4.1.1751.2.18.8.2.10
Info : The secondary stratum card has become the primary primary card.
                             imaGroupStatusChangeNotify 1.3.6.1.4.1.1751.2.18.8.2.11
The indicated SSPPCCC has a change in the states of the IMA Group Channel
                         interfaceEvents 1.3.6.1.4.1.1751.2.18.8.3
                             interfaceCreatedNotify 1.3.6.1.4.1.1751.2.18.8.3.1
Info : Notification that an interface has been created.
                             interfaceDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.2
Info : Notification that an interface has been deleted.
                             interfaceModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.3
Info : Notification that an interface has been modified.
                             interfaceModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.4
Info : Notification that an attempt to modify an interface has failed.
                             interfaceOutOfServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.5
Major : Notification that an interface is now out of service.
                             interfaceInServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.6
Info : Notification that an interface is now in service.
                             bridgeDomainFullNotify 1.3.6.1.4.1.1751.2.18.8.3.7
Info : The 15 ports available for the bridge domain are being used, leaving no space for an additional port.
                             bridgeDomainExceededForSlotNotify 1.3.6.1.4.1.1751.2.18.8.3.8
Info : The bridge domain number has been exceeded for the slot.
                             bridgeDomainNumberInUseNotify 1.3.6.1.4.1.1751.2.18.8.3.9
Info : Notification that a bridge domain number is currently in use.
                             bridgeDomainInServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.10
Info : Notification that a bridge domain is now in service.
                             bridgeDomainNumberInvalidNotify 1.3.6.1.4.1.1751.2.18.8.3.11
Info : Indicates that this interface contains an invalid bridge domain number. In order to create a domain, associate a port with a domain, or bring an interface in service, a valid domain number must be provided.
                             signalingModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.12
Info : This trap indicates that signaling has already been configured for this port and to change, you must bring all interfaces out of service -- including the channel specified in interfaceIndex.
                             lmiIntfStatusNotify 1.3.6.1.4.1.1751.2.18.8.3.13
Info : This trap indicates the status of an interface from the LMI perspective.
                             isdnLapdDownNotify 1.3.6.1.4.1.1751.2.18.8.3.14
Info : This trap indicates that LAPD on the ISDN interface has gone down.
                             isdnLapdUpNotify 1.3.6.1.4.1.1751.2.18.8.3.15
Info : This trap indicates that LAPD is functional on the specified ISDN interface.
                             bridgeDomainTimingRelationshipNotify 1.3.6.1.4.1.1751.2.18.8.3.16
Info : Trap sent when one of the following relationships is violated: (1) 2 * (BridgeForwardDelay - 1.0 sec) >= BridgeMaxAge (2) BridgeMaxAge >= 2 * (BridgeHelloTime + 1.0 sec).
                             ts16UsageModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.17
Info : Indicates that either TS16 has been in use for data while trying to change e1 TS16 from CCS to CAS, or signaling is on for at least one of the channels while trying to change e1 TS16 from CAS to CCS.
                             ceServiceTypeModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.18
Info : Indicates that configuring unstructured CE failed. Possible reasons are: (1) the port has been channelized; (2) the port has CAS turned on.
                             channelizationModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.19
Info : Indicates that channelizing/unchannelizing failed. Possible reasons are: (1) the port has been configured for unstructured CE; (2) the port has CAS turned on.
                             cirEmSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.20
Info : Notification that an endpoint has been configured as CES SPVC endpoint. Return value - interfaceIndex
                             cirEmSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.21
Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters.
                             cirEmSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.22
Info : Notification that CE SPVC configuration has been deleted. Return value - interfaceIndex
                             cirEmSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.23
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001.
                             cirEmSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.24
Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             vbrSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.25
Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return value - interfaceIndex
                             vbrSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.26
Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters.
                             vbrSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.27
Info : Notification that TE SPVC configuration has been deleted. Return value - interfaceIndex
                             vbrSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.28
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001.
                             vbrSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.29
Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             atmSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.30
Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return value - interfaceIndex - A-side vpi/vci value
                             atmSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.31
Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return value - interfaceIndex - A-side vpi/vci value - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters.
                             atmSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.32
Info : Notification that ATM SPVC configuration has been deleted. Return value - interfaceIndex - A-side vpi/vci value
                             atmSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.33
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001.
                             atmSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.34
Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             cRC4ModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.35
Info: Notification that modification of the CRC4 field of an E1 port failed.
                             imaGrpChannelFailNotify 1.3.6.1.4.1.1751.2.18.8.3.36
Info : The imaGrpChannelFailNotify trap indicates a failure in the IMA group. The imaGrpChannelStatus field indicates the reason for the failure.
                             atmImaIntfFailNotify 1.3.6.1.4.1.1751.2.18.8.3.37
Info : The atmImaIntfFailNotify trap indicates a failure in the physical IMA interface. The atmImaIntfStatus field indicates the reason for the failure.
                             imaGrpChannelClearedNotify 1.3.6.1.4.1.1751.2.18.8.3.38
Info : The imaGrpChannelClearedNotify trap indicates a failure has been cleared in an IMA group. The imaGrpChannelStatus field indicates the failure that has been cleared.
                             atmImaIntfClearedNotify 1.3.6.1.4.1.1751.2.18.8.3.39
Info : The atmImaIntfClearedNotify trap indicates a failure has been cleared in an IMA interface. The atmImaIntfStatus field indicates the failure that has been cleared.
                             pnniProtLnkUpAndAdv 1.3.6.1.4.1.1751.2.18.8.3.40
Info : Indicates that the Protocol Status of the PNNI Link is Up and Advertising.
                             pnniProtLinkUpAndNotAdv 1.3.6.1.4.1.1751.2.18.8.3.41
Info : Indicates that the Protocol Status of the PNNI Link is Up but not Advertising.
                             pnniProtLnkStatDown 1.3.6.1.4.1.1751.2.18.8.3.42
Info : Indicates that the Protocol Status of the PNNI Link is Down.
                             pnniIntfCfgFailNotify 1.3.6.1.4.1.1751.2.18.8.3.43
Info : Indicates that a PNNI Interface has failed to be Created.
                             viprPingTrap 1.3.6.1.4.1.1751.2.18.8.3.44
Info : The Vipr Task is notifying Network Management of the disposition of a previous Ping Request.
                             viprArpTrap 1.3.6.1.4.1.1751.2.18.8.3.45
Info : The Vipr Task is notifying Network Management of the disposition of a previous Arp Table Request.
                             viprRoutingTrap 1.3.6.1.4.1.1751.2.18.8.3.46
Info : The Vipr Task is notifying Network Management of the disposition of a previous Routing Table Request.
                             viprVpnTrap 1.3.6.1.4.1.1751.2.18.8.3.47
Info : Indicates success/fail of VPN level operations.
                             viprIpIntfTrap 1.3.6.1.4.1.1751.2.18.8.3.48
Info : Indicates success/fail of IP Network Interface level operations.
                             viprSubChanTrap 1.3.6.1.4.1.1751.2.18.8.3.49
Info : Indicates success/fail of Sub Channel level operations.
                             viprRtSrvTrap 1.3.6.1.4.1.1751.2.18.8.3.50
Info : Indicates success/fail of Vipr (Route Server) operations.
                             atmSvcIntfLayer2Up 1.3.6.1.4.1.1751.2.18.8.3.51
Info : Indicates that an ATM Svc Interface Assured Data Link is Up.
                             atmSvcIntfLayer2Down 1.3.6.1.4.1.1751.2.18.8.3.52
Info : Indicates that an ATM Svc Interface Assured Data Link is Down.
                             apsConfigurationModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.53
Info: Notification that an attempt to modify an APS configuration has failed
                             viprStatRtTrap 1.3.6.1.4.1.1751.2.18.8.3.54
Info : Indicates success/fail of Static Route operations.
                             interfaceCreateFailNotify 1.3.6.1.4.1.1751.2.18.8.3.55
Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details.
                             virtualIntfCreatedNotify 1.3.6.1.4.1.1751.2.18.8.3.56
Response to creation of VI
                             virtualIntfModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.57
Response to modification of VI
                             virtualIntfDeleteNotify 1.3.6.1.4.1.1751.2.18.8.3.58
Response to deletion of VI
                             virtualIntfModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.59
Response to Modify Fail of VI, Overload pvcFailureReasonCode
                             frAtmSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.60
Info : Notification that an endpoint has been configured as FR SPVC endpoint. Return values - interfaceIndex - dlci value
                             frAtmSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.61
Info : Notification that an attempt to configure an endpoint as FR SPVC endpoint has failed. Return values - interfaceIndex - dlci value - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters.
                             frAtmSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.62
Info : Notification that FR SPVC configuration has been deleted. Return values - interfaceIndex - dlci value
                             frAtmSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.63
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. Return values - interfaceIndex - dlci value
                             frAtmSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.64
Info : Notification that an attempt to modify a FR SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             atmAtmSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.65
Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address
                             atmAtmSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.66
Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters
                             atmAtmSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.67
Info : Notification that ATM SPVC configuration has been deleted. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address
                             atmAtmSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.68
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001.
                             atmAtmSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.69
Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             cirAtmSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.70
Info : Notification that an endpoint has been configured as CE SPVC endpoint. Return values - interfaceIndex - remote NSAP address
                             cirAtmSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.71
Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters
                             cirAtmSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.72
Info : Notification that CE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address
                             cirAtmSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.73
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001.
                             cirAtmSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.74
Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             vbrAtmSpvcConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.75
Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return values - interfaceIndex - remote NSAP address
                             vbrAtmSpvcConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.76
Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters
                             vbrAtmSpvcDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.77
Info : Notification that TE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address
                             vbrAtmSpvcModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.78
Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001.
                             vbrAtmSpvcModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.79
Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001.
                             virtualUNIIntfCreatedNotify 1.3.6.1.4.1.1751.2.18.8.3.80
Response to creation of Virtual UNI
                             virtualUNIIntfCreateFailNotify 1.3.6.1.4.1.1751.2.18.8.3.81
Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details.
                             virtualUNIIntfModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.82
Notification of a failure to modify a Virtual UNI interface.
                             virtualUNIIntfDeleteNotify 1.3.6.1.4.1.1751.2.18.8.3.83
Response to deletion of Virtual UNI
                             virtualUNIIntfModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.84
Response to Modify Fail of Virtual UNI, Overload interfaceFailureReasonCode
                             virtualUNIIntfOutOfServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.85
Notification of virtualUNI Out Of Service
                             virtualUNIIntfInServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.86
Notification of virtualUNI in Service
                             gr303IgCreatedNotify 1.3.6.1.4.1.1751.2.18.8.3.87
Response to creation of GR303IG
                             gr303IgCreateFailNotify 1.3.6.1.4.1.1751.2.18.8.3.88
Info : Notification that an attempt to create a gr303 interface group has failed. interfaceFailureReasonCode gives details.
                             gr303IgModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.89
Response to modification of GR303IG
                             gr303IgDeleteNotify 1.3.6.1.4.1.1751.2.18.8.3.90
Response to deletion of GR303IG
                             gr303IgModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.91
Response to Modify Fail of GR303IG, Overload interfaceFailureReasonCode
                             gr303IgOutOfServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.92
Notification of GR303IG Out Of Service
                             gr303IgInServiceNotify 1.3.6.1.4.1.1751.2.18.8.3.93
Notification of GR303IG in Service
                             gr303IgIntfAddedNotify 1.3.6.1.4.1.1751.2.18.8.3.94
Response to addition of DS1 interface into GR303IG
                             gr303IgIntfAddFailNotify 1.3.6.1.4.1.1751.2.18.8.3.95
Info : Notification that an attempt to add an interface has failed. interfaceFailureReasonCode gives details.
                             gr303IgIntfDeleteNotify 1.3.6.1.4.1.1751.2.18.8.3.96
Response to deletion of DS1 interface from GR303IG
                             gr303TMCChanDownNotify 1.3.6.1.4.1.1751.2.18.8.3.97
Info : This trap indicates that TMC (LAPD) on the GR303 interface has gone down.
                             gr303EOCChanDownNotify 1.3.6.1.4.1.1751.2.18.8.3.98
Info : This trap indicates that EOC (LAPD) on the GR303 interface has gone down.
                             gr303TMCChanUpNotify 1.3.6.1.4.1.1751.2.18.8.3.99
Info : This trap indicates that TMC(LAPD) is functional on the specified GR303 interface.
                             gr303EOCChanUpNotify 1.3.6.1.4.1.1751.2.18.8.3.100
Info : This trap indicates that EOC(LAPD) is functional on the specified GR303 interface.
                             gr303PPSStateChangeNotify 1.3.6.1.4.1.1751.2.18.8.3.101
This indicates a change in the states of primary and secondary TMC/EOC (lapd)
                             gr303PPSSwitchoverNotify 1.3.6.1.4.1.1751.2.18.8.3.102
This notification is the result of PPS switching command which will indicate the reason code, initiator and states
                             gr303PPSCommandFailNotify 1.3.6.1.4.1.1751.2.18.8.3.103
This is the notification of failure of PPS switching command
                             interfaceBandwidthChangeNotify 1.3.6.1.4.1.1751.2.18.8.3.104
Info : Notification that a interface has undergone reduction in bandwidth. Critical depending on Failure Reason Code.
                             atmAtmSpvpConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.105
Info : Notification that an ATM SPVP has been configured at the ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi value - remote NSAP Address
                             atmAtmSpvpConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.106
Info : Notification that an attempt to configure an ATM SPVP at the ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi value - remote NSAP Address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters.
                             atmAtmSpvpDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.107
Info : Notification that an ATM SPVP configuration has been deleted. Return values - interfaceIndex - A-side vpi value - remote NSAP Address
                             atmAtmSpvpModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.108
Info : Notification that an ATM SPVP configuration has been modified - this trap has been obsoleted 07/01/2001.
                             atmAtmSpvpModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.109
Info : Notification that an attempt to modify a ATM SPVP configuration has failed - this trap has been obsoleted 07/01/2001.
                             atmTrunkingLocalIWFConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.110
Info: Local IWF Configured return value: atmTrunkingIWFIdentifier
                             atmTrunkingLocalIWFConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.111
Info: Local IWF Configured return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode
                             atmTrunkingLocalIWFModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.112
Info: configuration of Local IWF modified return value: atmTrunkingIWFIdentifier
                             atmTrunkingLocalIWFModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.113
Info: Modification of Local IWF has failed return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode
                             atmTrunkingLocalIWFDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.114
Info: configuration of Local IWF deleted return value: atmTrunkingIWFIdentifier
                             atmTrunkingLocalIWFDeleteFailNotify 1.3.6.1.4.1.1751.2.18.8.3.115
Info: configuration of Local IWF can not be deleted return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode
                             atmTrunkingRemoteIWFConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.116
Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier
                             atmTrunkingRemoteIWFConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.117
Info : Notification that an ATM TRUNKING Remote IWF configuration has failed with return value : - atmTrunkingRmtIWFIdentifier - atmTrunkingConfigFailureCode
                             atmTrunkingRemoteIWFDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.118
Info : Notification that an ATM TRUNKING Remote IWF has been deleted with return values - atmTrunkingRmtIWFIdentifier
                             atmTrunkingRemoteIWFModifiedNotify 1.3.6.1.4.1.1751.2.18.8.3.119
Info : Notification that an ATM TRUNKING Remote IWF has been modified with return values - atmTrunkingRmtIWFIdentifier
                             atmTrunkingRemoteIWFModifyFailNotify 1.3.6.1.4.1.1751.2.18.8.3.120
Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier
                             atmTrunkingSigVccConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.121
Info : Notification that an ATM TRUNKING Signalling VCC has been configured between Local IWF and with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier
                             atmTrunkingSigVccConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.122
Info : Notification that an ATM TRUNKING Signalling VCC configuration has failed with return value: - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier - atmTrunkingConfigFailureCode
                             atmTrunkingSigVccDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.123
Info : Notification that an ATM TRUNKING Signalling VCC has been deleted with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier
                             atmTrunkingBrVccConfiguredNotify 1.3.6.1.4.1.1751.2.18.8.3.124
Info : Notification that an ATM TRUNKING Bearer VCC has been configured between Local IWF and with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier
                             atmTrunkingBrVccConfigFailNotify 1.3.6.1.4.1.1751.2.18.8.3.125
Info : Notification that an ATM TRUNKING Bearer VCC configuration has failed with return value: - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier - atmTrunkingConfigFailureCode
                             atmTrunkingBrVccDeletedNotify 1.3.6.1.4.1.1751.2.18.8.3.126
Info : Notification that an ATM TRUNKING Bearer VCC has been deleted with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier
                         connectionEvents 1.3.6.1.4.1.1751.2.18.8.4
                             atmPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.1
Response : The PVC VCC connection request between two atm interfaces failed.
                             atmPvcVpcReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.2
Response : The PVC VPC connection request between two atm interfaces failed.
                             ipAtmAppPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.3
Response : The PVC VCC connection request between in-band management and an atm interface has failed.
                             cirEmAtmPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.4
Response : The PVC VCC connection request between a circuit emulation interface and an atm interface has failed.
                             vbrAtmPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.5
Response : The PVC VCC connection request between a variable-bit rate interface and an atm interface has failed.
                             frAtmPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.6
Response : The PVC VCC connection request between a frame-relay interface and an atm interface has failed.
                             frFrPvcReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.7
Response : The PVC connection request between two frame-relay interfaces has failed.
                             cirEmCirEmPvcReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.8
Response : The PVC connection request between two circuit emulation interfaces has failed.
                             vbrVbrPvcReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.9
Response : The PVC connection request between two variable-bit rate interfaces has failed.
                             atmPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.10
Response : The PVC VCC connection between two atm interfaces has been created.
                             atmPvcVpcSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.11
Response : The PVC VPC connection between two atm interfaces has been created.
                             ipAtmAppPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.12
Response : The PVC VCC connection between in-band management and an atm interface has been created.
                             cirEmAtmPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.13
Response : The PVC VCC connection between a circuit emulation interface and an atm interface has been created.
                             vbrAtmPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.14
Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been created.
                             frAtmPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.15
Response : The PVC VCC connection between a frame-relay interface and an atm interface has been created.
                             frFrPvcSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.16
Response : The PVC connection between two frame-relay interfaces has been created.
                             cirEmCirEmPvcSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.17
Response : The PVC connection between two circuit-emulation interfaces has been created.
                             vbrVbrPvcSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.18
Response : The PVC connection between two variable-bit rate interfaces has been created.
                             atmPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.19
Response : The PVC VCC connection between two atm interfaces has been deleted.
                             atmPvcVpcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.20
Response : The PVC VPC connection between two atm interfaces has been deleted.
                             ipAtmAppPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.21
Response : The PVC VCC connection between in-band management and an atm interface has been deleted.
                             cirEmAtmPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.22
Response : The PVC VCC connection between a circuit-emulation interface and an atm interface has been deleted.
                             vbrAtmPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.23
Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been deleted.
                             frAtmPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.24
Response : The PVC VCC connection between a frame-relay interface and an atm interface has been deleted.
                             frFrPvcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.25
Response : The PVC connection between two frame-relay interfaces has been deleted.
                             cirEmCirEmPvcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.26
Response : The PVC connection between two circuit-emulation interfaces has been deleted.
                             vbrVbrPvcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.27
Response : The PVC connection between two variable-bit rate interfaces has been deleted.
                             bridgeBridgePvcReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.28
Response : The PVC connection request between two bridge interfaces has failed.
                             bridgeBridgePvcSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.29
Response : The PVC connection between two bridge interfaces has been created.
                             bridgeBridgePvcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.30
Response : The PVC connection between two bridge interfaces has been deleted.
                             bridgeAtmPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.31
Response : The PVC VCC connection request between a bridge interface and an atm interface has failed.
                             bridgeAtmPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.32
Response : The PVC VCC connection between a bridge interface and an atm interface has been created.
                             bridgeAtmPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.33
Response : The PVC VCC connection between a bridge interface and an atm interface has been deleted.
                             cellTestReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.34
Response : The PVC connection request has failed.
                             lmiDlciStatusNotify 1.3.6.1.4.1.1751.2.18.8.4.35
Response : Indicates the end-to-end status of the PVC of which this DLCI is a segment of.
                             cirEmAtmBkPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.36
Response : The DHPVC VCC backup connection request between a circuit emulation interface and an atm interface has failed.
                             cirEmAtmBkPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.37
Response : The DHPVC VCC backup connection between a circuit emulation interface and an atm interface has been created.
                             cirEmAtmBkPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.38
Response : The DHPVC VCC backup connection between a circuit-emulation interface and an atm interface has been deleted.
                             vbrAtmBkPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.39
Response : The DHPVC VCC backup connection request between a variable-bit rate interface and an atm interface has failed.
                             vbrAtmBkPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.40
Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been created.
                             vbrAtmBkPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.41
Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been deleted.
                             atmBkPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.42
Response : The DHPVC VCC backup connection request between an atm interface and an atm interface has failed.
                             atmBkPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.43
Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been created.
                             atmBkPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.44
Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been deleted.
                             frAtmBkPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.45
Response : The DHPVC VCC backup connection request between a frame relay interface and an atm interface has failed.
                             frAtmBkPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.46
Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been created.
                             frAtmBkPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.47
Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been deleted.
                             atmBkPvcVpcReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.48
Response : The DHPVC VPC backup connection request between an atm interface and an atm interface has failed.
                             atmBkPvcVpcSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.49
Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been created.
                             atmBkPvcVpcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.50
Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been deleted.
                             bridgeAtmBkPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.51
Response : The DHPVC VCC backup connection request between a bridge interface and an atm interface has failed.
                             bridgeAtmBkPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.52
Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been created.
                             bridgeAtmBkPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.53
Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been deleted.
                             ipAtmBkAppPvcVccReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.54
Response : The DHPVC VCC backup connection request between an in-band management interface and an atm interface has failed.
                             ipAtmBkAppPvcVccSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.55
Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been created.
                             ipAtmBkAppPvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.56
Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been deleted.
                             cirEmAtmSpvcVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.57
Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci
                             vbrAtmSpvcVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.58
Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci
                             atmSpvcVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.59
Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci B-side interfaceIndex B-side vpi/vci
                             cirEmAtmSpvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.60
Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci
                             vbrAtmSpvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.61
Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci
                             atmSpvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.62
Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci B-side interfaceIndex B-side vpi/vci
                             oamTestReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.63
Response : OAM loopback test request has failed.
                             oamActDeactResultNotify 1.3.6.1.4.1.1751.2.18.8.4.64
Response : the final status of oam Activation-Deactivation request.
                             frAtmSpvcVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.65
Response : Notification that a SPVC connection between FR and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side dlci B-side interfaceIndex B-side vpi/vci
                             frAtmSpvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.66
Response : Notification that a SPVC connection between FR and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side dlci B-side interfaceIndex B-side vpi/vci
                             atmAtmSpvcVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.67
Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP address B-side interfaceIndex B-side vpi/vci
                             atmAtmSpvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.68
Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP address B-side interfaceIndex B-side vpi/vci
                             cirAtmSpvcVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.69
Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci
                             cirAtmSpvcVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.70
Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci
                             vbrAtmSpvcSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.71
Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci
                             vbrAtmSpvcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.72
Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci
                             aal2TrunkConfigSetupNotify 1.3.6.1.4.1.1751.2.18.8.4.73
Response : The PVC VCC connection for aal2 trunk
                             aal2TrunkConfigTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.74
Response : The PVC VCC AAL2 Trunk has been deleted
                             aal2TrunkConfigReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.75
Response : The PVC VCC aal2 trunk could not be setup
                             gr303Aal2PvcConfigReqFailNotify 1.3.6.1.4.1.1751.2.18.8.4.76
Response : The GR303 PVC VCC on aal2 trunk could not be setup
                             gr303Aal2PvcSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.77
Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been made successfully.
                             gr303Aal2PvcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.78
Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been deleted
                             dhpvcChangeNotify 1.3.6.1.4.1.1751.2.18.8.4.79
This will indicate the changes in a dual home pvc. This will have 2 indications. One is when there is a switchover which indicate the last state and the new one (eg Prim To Bkup) Secondly there will also be an indication when there is a state change which will indicate the new state only (eg Primary is Active and in No Fail Condition and Backup is Passive and in Fail Condition). In case of state change the traffic path is not changed but it indicates the state of the passive path.
                             atmAtmSpvcVpcSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.80
Response : Notification that a SPVP connection between ATM and ATM endpoints has been made successfully.
                             atmAtmSpvcVpcTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.81
Response : Notification that a SPVP connection between ATM and ATM endpoints has been deleted.
                             iptResultNotify 1.3.6.1.4.1.1751.2.18.8.4.82
Response : the final status of interface protection request.
                             pgtResultNotify 1.3.6.1.4.1.1751.2.18.8.4.83
Response : the final status of interface protection group request.
                             atmTrunkingSigVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.84
Response : Notification that a ATM Trunking Signalling VCC has been setup successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIdentifier
                             atmTrunkingSigVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.85
Response : Notification that a ATM Trunking Signalling VCC has been torn down successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIdentifier
                             atmTrunkingBrVccSetUpNotify 1.3.6.1.4.1.1751.2.18.8.4.86
Response : Notification that a ATM Trunking Bearer VCC has been setup successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier
                             atmTrunkingBrVccTearDownNotify 1.3.6.1.4.1.1751.2.18.8.4.87
Response : Notification that a ATM Trunking Bearer VCC has been torn down successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier
                     sysStatistics 1.3.6.1.4.1.1751.2.18.9
                     equipStatistics 1.3.6.1.4.1.1751.2.18.10
                           ds3PortStatsTable 1.3.6.1.4.1.1751.2.18.10.1 no-access
Table of statisics for a DS3 port
                               ds3PortStatsEntry 1.3.6.1.4.1.1751.2.18.10.1.1 no-access
Row definition for the DS3 port statistics table
                                   ds3PortStatsId 1.3.6.1.4.1.1751.2.18.10.1.1.1 integer32 no-access
Port ID - Slot/Port (SSPP)
                                   ds3PortStatsTimer 1.3.6.1.4.1.1751.2.18.10.1.1.2 integer32 read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                                   ds3PortStatsCurrentSEFSs 1.3.6.1.4.1.1751.2.18.10.1.1.3 integer32 read-only
severely errored framing seconds
                                   ds3PortStatsCurrentLCVs 1.3.6.1.4.1.1751.2.18.10.1.1.4 integer32 read-only
Line coding violations encountered
                                   ds3PortStatsCurrentLESs 1.3.6.1.4.1.1751.2.18.10.1.1.5 integer32 read-only
Line errored seconds
                           ds1PortStatsTable 1.3.6.1.4.1.1751.2.18.10.2 no-access
Table of statisics for a DS1 port
                               ds1PortStatsEntry 1.3.6.1.4.1.1751.2.18.10.2.1 no-access
Row definition for the DS1 port statistics table
                                   ds1PortStatsId 1.3.6.1.4.1.1751.2.18.10.2.1.1 integer32 no-access
Port ID - Slot/Port (SSPP)
                                   ds1PortStatsTimer 1.3.6.1.4.1.1751.2.18.10.2.1.2 integer32 read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                                   ds1PortStatsCurrentESs 1.3.6.1.4.1.1751.2.18.10.2.1.3 integer32 read-only
The number of Errored Seconds, encountered by a DS1 interface.
                                   ds1PortStatsCurrentSESs 1.3.6.1.4.1.1751.2.18.10.2.1.4 integer32 read-only
The number of Severely Errored Seconds encoun- tered by a DS1 interface.
                                   ds1PortStatsCurrentLCVs 1.3.6.1.4.1.1751.2.18.10.2.1.5 integer32 read-only
The number of Line Code Violations (LCVs) en- countered by a DS1 interface.
                           oc3PortStatsTable 1.3.6.1.4.1.1751.2.18.10.3 no-access
Table of statisics for a OC3 port
                               oc3PortStatsEntry 1.3.6.1.4.1.1751.2.18.10.3.1 no-access
Row definition for the OC3 port statistics table
                                   oc3PortStatsId 1.3.6.1.4.1.1751.2.18.10.3.1.1 integer32 no-access
Port ID - Slot/Port (SSPP)
                                   oc3PortStatsSectionBip8Errs 1.3.6.1.4.1.1751.2.18.10.3.1.2 integer32 read-only
section sublayer BIP8 errors.
                                   oc3PortStatsLineBip8Errs 1.3.6.1.4.1.1751.2.18.10.3.1.3 integer32 read-only
line sublayer BIP8 errors.
                                   oc3PortStatsPathBip8Errs 1.3.6.1.4.1.1751.2.18.10.3.1.4 integer32 read-only
path sublayer BIP8 errors.
                                   oc3PortStatsLineFebeCount 1.3.6.1.4.1.1751.2.18.10.3.1.5 integer32 read-only
line sublayer FEBE count.
                                   oc3PortStatsPathFebeCount 1.3.6.1.4.1.1751.2.18.10.3.1.6 integer32 read-only
path sublayer FEBE count.
                                   oc3PortStatsTimer 1.3.6.1.4.1.1751.2.18.10.3.1.7 integer32 read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                           msPortStatsTable 1.3.6.1.4.1.1751.2.18.10.4 no-access
Table of statisics for a MS port
                               msPortStatsEntry 1.3.6.1.4.1.1751.2.18.10.4.1 no-access
Row definition for the MS port statistics table
                                   msPortStatsId 1.3.6.1.4.1.1751.2.18.10.4.1.1 integer32 no-access
Port ID - Slot/Port (SSPP)
                                   msPortStatsFrameErrors 1.3.6.1.4.1.1751.2.18.10.4.1.4 integer32 read-only
P-bit severely errored seconds
                                   msPortStatsOutOfFrameSeconds 1.3.6.1.4.1.1751.2.18.10.4.1.5 integer32 read-only
severely errored framing seconds
                                   msPortStatsTimer 1.3.6.1.4.1.1751.2.18.10.4.1.6 integer32 read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                           e3PortStatsTable 1.3.6.1.4.1.1751.2.18.10.5 no-access
Table of statisics for a E3 port
                               e3PortStatsEntry 1.3.6.1.4.1.1751.2.18.10.5.1 no-access
Row definition for the E3 port statistics table
                                   e3PortStatsId 1.3.6.1.4.1.1751.2.18.10.5.1.1 integer32 no-access
Port ID - Slot/Port (SSPP)
                                   e3PortStatsTimer 1.3.6.1.4.1.1751.2.18.10.5.1.2 integer32 read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                                   e3PortStatsCurrentSEFSs 1.3.6.1.4.1.1751.2.18.10.5.1.3 integer32 read-only
severely errored framing seconds
                                   e3PortStatsCurrentLCVs 1.3.6.1.4.1.1751.2.18.10.5.1.4 integer32 read-only
Line coding violations encountered
                                   e3PortStatsCurrentLESs 1.3.6.1.4.1.1751.2.18.10.5.1.5 integer32 read-only
Line errored seconds
                           e1PortStatsTable 1.3.6.1.4.1.1751.2.18.10.6 no-access
Table of statisics for a E1 port
                               e1PortStatsEntry 1.3.6.1.4.1.1751.2.18.10.6.1 no-access
Row definition for the E1 port statistics table
                                   e1PortStatsId 1.3.6.1.4.1.1751.2.18.10.6.1.1 integer32 no-access
Port ID - Slot/Port (SSPP)
                                   e1PortStatsTimer 1.3.6.1.4.1.1751.2.18.10.6.1.2 integer32 read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                                   e1PortStatsCurrentESs 1.3.6.1.4.1.1751.2.18.10.6.1.3 integer32 read-only
The number of Errored Seconds, encountered by a E1 interface.
                                   e1PortStatsCurrentSESs 1.3.6.1.4.1.1751.2.18.10.6.1.4 integer32 read-only
The number of Severely Errored Seconds encoun- tered by a E1 interface.
                                   e1PortStatsCurrentLCVs 1.3.6.1.4.1.1751.2.18.10.6.1.5 integer32 read-only
The number of Line Code Violations (LCVs) en- countered by a E1 interface.
                           ethernetPortStatsTable 1.3.6.1.4.1.1751.2.18.10.7 no-access
Statisics for a collection of ethernet-like interfaces attached to a particular system.
                               ethernetPortStatsEntry 1.3.6.1.4.1.1751.2.18.10.7.1 no-access
Statistics for a particular interface to an ethernet-like medium.
                                   ethernetPortStatsId 1.3.6.1.4.1.1751.2.18.10.7.1.1 integer32 no-access
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ethernetPortId.
                                   ethernetPortStatsTimer 1.3.6.1.4.1.1751.2.18.10.7.1.2 integer32 read-only
Time, in seconds, since last reset.
                                   ethernetPortStatsAlignmentErrors 1.3.6.1.4.1.1751.2.18.10.7.1.3 integer32 read-only
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
                                   ethernetPortStatsFCSErrors 1.3.6.1.4.1.1751.2.18.10.7.1.4 integer32 read-only
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
                                   ethernetPortStatsSingleCollisionFrames 1.3.6.1.4.1.1751.2.18.10.7.1.5 integer32 read-only
A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, IfOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the ethernetPortStatsMulitipleCollisionFrames object.
                                   ethernetPortStatsMultipleCollisionFrames 1.3.6.1.4.1.1751.2.18.10.7.1.6 integer32 read-only
A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, IfOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the ethernetPortStatsSingleCollisionFrames object.
                                   ethernetPortStatsSQETestErrors 1.3.6.1.4.1.1751.2.18.10.7.1.7 integer32 read-only
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.
                                   ethernetPortStatsDeferredTransmissions 1.3.6.1.4.1.1751.2.18.10.7.1.8 integer32 read-only
A count of frames for which the first transmission attempt on a particluar interface is delayed because the medium is busy. the count represented by an instance of this object does not include frames involved in collisions.
                                   ethernetPortStatsLateCollisions 1.3.6.1.4.1.1751.2.18.10.7.1.9 integer32 read-only
The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics.
                                   ethernetPortStatsExcessiveCollisions 1.3.6.1.4.1.1751.2.18.10.7.1.10 integer32 read-only
A count of frames for which transmission on a particular interface fails due to excessive collisions.
                                   ethernetPortStatsInternalMacTransmitErrors 1.3.6.1.4.1.1751.2.18.10.7.1.11 integer32 read-only
A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the ethernetPortStatsLateCollisions object, the ethernetPortStatsExcessiveCollisions object, or the ethernetPortStatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted.
                                   ethernetPortStatsCarrierSenseErrors 1.3.6.1.4.1.1751.2.18.10.7.1.12 integer32 read-only
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt.
                                   ethernetPortStatsFrameTooLongs 1.3.6.1.4.1.1751.2.18.10.7.1.13 integer32 read-only
A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
                                   ethernetPortStatsInternalMacReceiveErrors 1.3.6.1.4.1.1751.2.18.10.7.1.14 integer32 read-only
A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the ethernetPortStatsFrameTooLongs object, the ethernetPortStatsAlignmentErrors object, or the ethernetPortStatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.
                           oc3APSPairStatsTable 1.3.6.1.4.1.1751.2.18.10.8 no-access
Table of statisics for a OC3 port
                               oc3APSPairStatsEntry 1.3.6.1.4.1.1751.2.18.10.8.1 no-access
Row definition for the OC3 port statistics table
                                   oc3APSPairStatsId 1.3.6.1.4.1.1751.2.18.10.8.1.1 integer32 no-access
Working Port ID - Slot/Port (SSPP)
                                   oc3APSPairWorkingSFDuration 1.3.6.1.4.1.1751.2.18.10.8.1.2 integer32 read-only
Duration in seconds for which the Work port has been in Signal Failure state
                                   oc3APSPairWorkingSDDuration 1.3.6.1.4.1.1751.2.18.10.8.1.3 integer32 read-only
Duration in seconds for which the Work port has been in Signal Degradation state
                                   oc3APSPairProtectionSFDuration 1.3.6.1.4.1.1751.2.18.10.8.1.4 integer32 read-only
Duration in seconds for which the Prot port has been in Signal Failure state
                                   oc3APSPairProtectionSDDuration 1.3.6.1.4.1.1751.2.18.10.8.1.5 integer32 read-only
Duration in seconds for which the Prot port has been in Signal Degradation state
                                   oc3APSPairTransmitK1K2Bytes 1.3.6.1.4.1.1751.2.18.10.8.1.6 octet string read-only
The k1 / k2 bytes being transmitted by the prot port to the remote port.
                                   oc3APSPairReceiveK1K2Bytes 1.3.6.1.4.1.1751.2.18.10.8.1.7 octet string read-only
k1 / k2 bytes from the received SONET header on the protection port. k1 / k2 are used for the APS communication protocol.
                                   oc3APSPairSwitchOverCount 1.3.6.1.4.1.1751.2.18.10.8.1.8 integer32 read-only
Number of times the APS pair has switched over since last configuration.
                           viprVpnStatsTable 1.3.6.1.4.1.1751.2.18.10.9 no-access
Statistics collected per vpn based
                               viprVpnStatsEntry 1.3.6.1.4.1.1751.2.18.10.9.1 no-access
Statistics collected per vpn based
                                   viprVpnStatsTimer 1.3.6.1.4.1.1751.2.18.10.9.1.1 integer32 read-only
A timeout value in which the RS Module must reply to statistics requests.
                                   viprVpnStatsIcmpOutEchoRPs 1.3.6.1.4.1.1751.2.18.10.9.1.2 integer32 read-only
Echo Reply
                                   viprVpnStatsIcmpOutDestURs 1.3.6.1.4.1.1751.2.18.10.9.1.3 integer32 read-only
Destination unreachable
                                   viprVpnStatsIcmpOutSrcQ 1.3.6.1.4.1.1751.2.18.10.9.1.4 integer32 read-only
Source Quenches
                                   viprVpnStatsIcmpOutRedirects 1.3.6.1.4.1.1751.2.18.10.9.1.5 integer32 read-only
Redirect message type
                                   viprVpnStatsIcmpOutEchoRQs 1.3.6.1.4.1.1751.2.18.10.9.1.6 integer32 read-only
Echo Requests
                                   viprVpnStatsIcmpOutTimeXs 1.3.6.1.4.1.1751.2.18.10.9.1.7 integer32 read-only
Time exceeded
                                   viprVpnStatsIcmpOutParamps 1.3.6.1.4.1.1751.2.18.10.9.1.8 integer32 read-only
Parameter problem
                                   viprVpnStatsIcmpOutTimeRQs 1.3.6.1.4.1.1751.2.18.10.9.1.9 integer32 read-only
Timestamp requests
                                   viprVpnStatsIcmpOutTimeRPs 1.3.6.1.4.1.1751.2.18.10.9.1.10 integer32 read-only
Timestamp replies
                                   viprVpnStatsIcmpOutInfoRQs 1.3.6.1.4.1.1751.2.18.10.9.1.11 integer32 read-only
Information Request
                                   viprVpnStatsIcmpOutInfoRPs 1.3.6.1.4.1.1751.2.18.10.9.1.12 integer32 read-only
Echo Reply
                                   viprVpnStatsIcmpOutMaskRQs 1.3.6.1.4.1.1751.2.18.10.9.1.13 integer32 read-only
Mask Request
                                   viprVpnStatsIcmpOutMaskRPs 1.3.6.1.4.1.1751.2.18.10.9.1.14 integer32 read-only
Mask Reply
                                   viprVpnStatsIcmpOutErrors 1.3.6.1.4.1.1751.2.18.10.9.1.15 integer32 read-only
unrecognized ICMP type
                                   viprVpnStatsIcmpInErrors 1.3.6.1.4.1.1751.2.18.10.9.1.16 integer32 read-only
error in received icmp message
                                   viprVpnStatsIcmpInEchoRQs 1.3.6.1.4.1.1751.2.18.10.9.1.17 integer32 read-only
received echo request
                                   viprVpnStatsIcmpInAddrMasks 1.3.6.1.4.1.1751.2.18.10.9.1.18 integer32 read-only
received mask request
                                   viprVpnStatsIcmpInAddrMaskReps 1.3.6.1.4.1.1751.2.18.10.9.1.19 integer32 read-only
received mask reply
                                   viprVpnStatsIcmpInEchoReps 1.3.6.1.4.1.1751.2.18.10.9.1.20 integer32 read-only
received echo replies
                                   viprVpnStatsIcmpInDestUnreachs 1.3.6.1.4.1.1751.2.18.10.9.1.21 integer32 read-only
received destination unreacheable message
                                   viprVpnStatsIcmpInSrcQuenchs 1.3.6.1.4.1.1751.2.18.10.9.1.22 integer32 read-only
received source quench
                                   viprVpnStatsIcmpInTimeExcds 1.3.6.1.4.1.1751.2.18.10.9.1.23 integer32 read-only
received time exceeded message
                                   viprVpnStatsIcmpInParamProbs 1.3.6.1.4.1.1751.2.18.10.9.1.24 integer32 read-only
received parameter problem message
                                   viprVpnStatsIcmpInTimeStamps 1.3.6.1.4.1.1751.2.18.10.9.1.25 integer32 read-only
received time stamp request
                                   viprVpnStatsIcmpInTimeStampsReps 1.3.6.1.4.1.1751.2.18.10.9.1.26 integer32 read-only
received time stamp replies
                     intfStatistics 1.3.6.1.4.1.1751.2.18.11
                           atmIfStatsTable 1.3.6.1.4.1.1751.2.18.11.1 no-access
Table of statistics for an atmUni interface
                               atmIfStatsEntry 1.3.6.1.4.1.1751.2.18.11.1.1 no-access
Row definition for the atmUni statistics table
                                   atmIfStatsId 1.3.6.1.4.1.1751.2.18.11.1.1.1 intfindex no-access
Interface index (SSPPCCC) to the atmUni statistics table
                                   atmIfStatsValidCellsInHi 1.3.6.1.4.1.1751.2.18.11.1.1.2 integer32 read-only
Number of valid cells received on the channel - High Word
                                   atmIfStatsValidCellsInLo 1.3.6.1.4.1.1751.2.18.11.1.1.3 integer32 read-only
Number of valid cells received on the channel - low Word
                                   atmIfStatsErroredCellsIn 1.3.6.1.4.1.1751.2.18.11.1.1.4 integer32 read-only
Number of errored cells received on the channel
                                   atmIfStatsMismatchedCellsIn 1.3.6.1.4.1.1751.2.18.11.1.1.5 integer32 read-only
Number of Vpi/Vci translation errors on input cells.
                                   atmIfStatsNullCellsOutHi 1.3.6.1.4.1.1751.2.18.11.1.1.6 integer32 read-only
Number of null cells sent out on the channel - High Word
                                   atmIfStatsNullCellsOutLo 1.3.6.1.4.1.1751.2.18.11.1.1.7 integer32 read-only
Number of null cells sent out on the channel - Low Word
                                   atmIfStatsValidCellsOutHi 1.3.6.1.4.1.1751.2.18.11.1.1.8 integer32 read-only
Number of valid cells sent out on the channel - High Word
                                   atmIfStatsValidCellsOutLo 1.3.6.1.4.1.1751.2.18.11.1.1.9 integer32 read-only
Number of valid cells sent out on the channel - Low Word
                                   atmIfStatsTimer 1.3.6.1.4.1.1751.2.18.11.1.1.10 integer32 read-only
Time, in seconds, since last reset.
                           frUniStatsTable 1.3.6.1.4.1.1751.2.18.11.2 no-access
Table of statistics for a Frame Relay UNI Interface
                               frUniStatsEntry 1.3.6.1.4.1.1751.2.18.11.2.1 no-access
Row definition for the Frame Realy UNI statistics table
                                   frUniStatsId 1.3.6.1.4.1.1751.2.18.11.2.1.1 intfindex no-access
Interface index (SSPPCCC) to the frame relay UNI statistics table
                                   frUniStatsTimer 1.3.6.1.4.1.1751.2.18.11.2.1.9 integer read-only
Time, in seconds, since last reset.
                                   frUniStatsCellsMismatched 1.3.6.1.4.1.1751.2.18.11.2.1.10 integer32 read-only
number of cells not matched to provisioned DLCIs.
                                   frUniStatsErroredFrames 1.3.6.1.4.1.1751.2.18.11.2.1.11 integer32 read-only
number of errored frames.
                                   frUniStatsCellsEncodedHi 1.3.6.1.4.1.1751.2.18.11.2.1.12 integer32 read-only
number of cells encoded - (High order portion).
                                   frUniStatsCellsEncodedLo 1.3.6.1.4.1.1751.2.18.11.2.1.13 integer32 read-only
number of cells encoded - (Low order portion).
                                   frUniStatsFramesEncodedHi 1.3.6.1.4.1.1751.2.18.11.2.1.14 integer32 read-only
number of frames encoded - (High order portion).
                                   frUniStatsFramesEncodedLo 1.3.6.1.4.1.1751.2.18.11.2.1.15 integer32 read-only
number of frames encoded - (Low order portion).
                                   frUniStatsCellsDecodedHi 1.3.6.1.4.1.1751.2.18.11.2.1.16 integer32 read-only
number of cells decoded - (High order portion).
                                   frUniStatsCellsDecodedLo 1.3.6.1.4.1.1751.2.18.11.2.1.17 integer32 read-only
number of cells decoded - (Low order portion).
                                   frUniStatsFramesDecodedHi 1.3.6.1.4.1.1751.2.18.11.2.1.18 integer32 read-only
number of frames decoded - (High order portion).
                                   frUniStatsFramesDecodedLo 1.3.6.1.4.1.1751.2.18.11.2.1.19 integer32 read-only
number of frames decoded - (Low order portion).
                                   frUniStatsAAL5Errors 1.3.6.1.4.1.1751.2.18.11.2.1.20 integer32 read-only
number of aal5 PDUs with invalid byte count or CRC-32.
                           cirEmIfStatsTable 1.3.6.1.4.1.1751.2.18.11.3 no-access
Table of statistics for an cirEm interface
                               cirEmIfStatsEntry 1.3.6.1.4.1.1751.2.18.11.3.1 no-access
Row definition for the cirEm statistics table
                                   cirEmIfStatsId 1.3.6.1.4.1.1751.2.18.11.3.1.1 intfindex no-access
Interface index (SSPPCCC) to the cirEm statistics table
                                   cirEmIfStatsCellsEncodedHi 1.3.6.1.4.1.1751.2.18.11.3.1.2 integer32 read-only
Incoming cells from the outside media to the i/o port
                                   cirEmIfStatsCellsEncodedLo 1.3.6.1.4.1.1751.2.18.11.3.1.3 integer32 read-only
Incoming cells from the outside media to the i/o port
                                   cirEmIfStatsCellsDecodedHi 1.3.6.1.4.1.1751.2.18.11.3.1.4 integer32 read-only
Outgoing cells from the i/o port to the outside media
                                   cirEmIfStatsCellsDecodedLo 1.3.6.1.4.1.1751.2.18.11.3.1.5 integer32 read-only
Outgoing cells from the i/o port to the outside media
                                   cirEmIfStatsTimer 1.3.6.1.4.1.1751.2.18.11.3.1.6 integer32 read-only
Time, in seconds, since last reset.
                           vbrIfStatsTable 1.3.6.1.4.1.1751.2.18.11.4 no-access
Table of statistics for an vbr interface
                               vbrIfStatsEntry 1.3.6.1.4.1.1751.2.18.11.4.1 no-access
Row definition for the vbr statistics table
                                   vbrIfStatsId 1.3.6.1.4.1.1751.2.18.11.4.1.1 intfindex no-access
Interface index (SSPPCCC) to the vbr statistics table
                                   vbrIfStatsCellsEncodedHi 1.3.6.1.4.1.1751.2.18.11.4.1.2 integer32 read-only
Incoming cells from the outside media to the i/o port
                                   vbrIfStatsCellsEncodedLo 1.3.6.1.4.1.1751.2.18.11.4.1.3 integer32 read-only
Incoming cells from the outside media to the i/o port
                                   vbrIfStatsCellsDecodedHi 1.3.6.1.4.1.1751.2.18.11.4.1.4 integer32 read-only
Outgoing cells from the i/o port to the outside media
                                   vbrIfStatsCellsDecodedLo 1.3.6.1.4.1.1751.2.18.11.4.1.5 integer32 read-only
Outgoing cells from the i/o port to the outside media
                                   vbrIfStatsTimer 1.3.6.1.4.1.1751.2.18.11.4.1.6 integer32 read-only
Time, in seconds, since last reset.
                           frLmiStatsTable 1.3.6.1.4.1.1751.2.18.11.5 no-access
Table of statistics for a Frame Relay LMI Interface
                               frLmiStatsEntry 1.3.6.1.4.1.1751.2.18.11.5.1 no-access
Row definition for the Frame Realy LMI statistics table
                                   frLmiStatsId 1.3.6.1.4.1.1751.2.18.11.5.1.1 intfindex no-access
Interface index (SSPPCCC) to the frame relay LMI statistics table
                                   frLmiStatsEnqRx 1.3.6.1.4.1.1751.2.18.11.5.1.2 integer32 read-only
number of STATUS ENQ messages received
                                   frLmiStatsEnqTx 1.3.6.1.4.1.1751.2.18.11.5.1.3 integer32 read-only
number of STATUS ENQ messages transmitted
                                   frLmiStatsStatusRx 1.3.6.1.4.1.1751.2.18.11.5.1.4 integer32 read-only
number of STATUS messages received
                                   frLmiStatsStatusTx 1.3.6.1.4.1.1751.2.18.11.5.1.5 integer32 read-only
number of STATUS messages transmitted
                                   frLmiStatsAsyncRx 1.3.6.1.4.1.1751.2.18.11.5.1.6 integer32 read-only
number of ASYNC STATUS messages received
                                   frLmiStatsAsyncTx 1.3.6.1.4.1.1751.2.18.11.5.1.7 integer32 read-only
number of ASYNC STATUS messages transmitted
                                   frLmiStatsPktDisc 1.3.6.1.4.1.1751.2.18.11.5.1.8 integer32 read-only
The number of lmi messages discarded due to invalid length, receive sequence numbers, or other error.
                                   frLmiStatsT391Exp 1.3.6.1.4.1.1751.2.18.11.5.1.9 integer read-only
Link integrity verification polling timer expiry
                                   frLmiStatsT392Exp 1.3.6.1.4.1.1751.2.18.11.5.1.10 integer read-only
Polling verification timer expiry
                                   frLmiStatsLinkReset 1.3.6.1.4.1.1751.2.18.11.5.1.11 integer read-only
Number of times interface operational status was in service after system startup.
                                   frLmiStatsTimer 1.3.6.1.4.1.1751.2.18.11.5.1.12 integer read-only
Time since last reset for statistics - in seconds
                           bridgeStatsTable 1.3.6.1.4.1.1751.2.18.11.6 no-access
Table of statistics for a bridge interface.
                               bridgeStatsEntry 1.3.6.1.4.1.1751.2.18.11.6.1 no-access
Row definition for the bridge interface statistics table
                                   bridgeStatsId 1.3.6.1.4.1.1751.2.18.11.6.1.1 integer32 no-access
Interface index (SSPPCCC) to the bridge
                                   bridgeStatsTimer 1.3.6.1.4.1.1751.2.18.11.6.1.2 integer32 read-only
Time, in seconds, since last reset.
                                   bridgeStatsBasePortDelayExceededDiscardsHi 1.3.6.1.4.1.1751.2.18.11.6.1.8 integer32 read-only
The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. High-order 32 bits.
                                   bridgeStatsBasePortDelayExceededDiscardsLo 1.3.6.1.4.1.1751.2.18.11.6.1.9 integer32 read-only
The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. Low-order 32 bits.
                                   bridgeStatsBasePortMtuExceededDiscardsHi 1.3.6.1.4.1.1751.2.18.11.6.1.10 integer32 read-only
The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. High-order 32 bits.
                                   bridgeStatsBasePortMtuExceededDiscardsLo 1.3.6.1.4.1.1751.2.18.11.6.1.11 integer32 read-only
The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. Low-order 32 bits.
                                   bridgeStatsTpPortInFramesHi 1.3.6.1.4.1.1751.2.18.11.6.1.12 integer32 read-only
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. High-order 32 bits.
                                   bridgeStatsTpPortInFramesLo 1.3.6.1.4.1.1751.2.18.11.6.1.13 integer32 read-only
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. Low-order 32 bits.
                                   bridgeStatsTpPortOutFramesHi 1.3.6.1.4.1.1751.2.18.11.6.1.14 integer32 read-only
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. High-order 32 bits.
                                   bridgeStatsTpPortOutFramesLo 1.3.6.1.4.1.1751.2.18.11.6.1.15 integer32 read-only
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. Low-order 32 bits.
                                   bridgeStatsTpPortInDiscardsHi 1.3.6.1.4.1.1751.2.18.11.6.1.16 integer32 read-only
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. High-order 32 bits.
                                   bridgeStatsTpPortInDiscardsLo 1.3.6.1.4.1.1751.2.18.11.6.1.17 integer32 read-only
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. Low-order 32 bits.
                           dbCirEmIfStatsTable 1.3.6.1.4.1.1751.2.18.11.7 no-access
Table of statistics for a dbCirEm interface.
                               dbCirEmIfStatsEntry 1.3.6.1.4.1.1751.2.18.11.7.1 no-access
Row definition for the dbCirEm statistics table.
                                   dbCirEmIfStatsId 1.3.6.1.4.1.1751.2.18.11.7.1.1 intfindex no-access
Interface index (SSPPCCC) to the dbCirEm statistics table.
                                   dbCirEmIfStatsCellsEncodedHi 1.3.6.1.4.1.1751.2.18.11.7.1.2 integer32 read-only
Incoming cells from the outside media to the i/o port.
                                   dbCirEmIfStatsCellsEncodedLo 1.3.6.1.4.1.1751.2.18.11.7.1.3 integer32 read-only
Incoming cells from the outside media to the i/o port.
                                   dbCirEmIfStatsCellsDecodedHi 1.3.6.1.4.1.1751.2.18.11.7.1.4 integer32 read-only
Outgoing cells from the i/o port to the outside media.
                                   dbCirEmIfStatsCellsDecodedLo 1.3.6.1.4.1.1751.2.18.11.7.1.5 integer32 read-only
Outgoing cells from the i/o port to the outside media.
                                   dbCirEmIfStatsTimer 1.3.6.1.4.1.1751.2.18.11.7.1.6 integer32 read-only
Time, in seconds, since last reset.
                           atmImaStatsTable 1.3.6.1.4.1.1751.2.18.11.8 no-access
Table of statistics for an atmIma interface.
                               atmImaStatsEntry 1.3.6.1.4.1.1751.2.18.11.8.1 no-access
Row definition for the atmIma statistics table.
                                   atmImaStatsId 1.3.6.1.4.1.1751.2.18.11.8.1.1 intfindex no-access
Interface index (SSPPCCC) to the atmIma statistics table.
                                   atmImaStatsTimer 1.3.6.1.4.1.1751.2.18.11.8.1.2 integer32 read-only
Time, in seconds, since last reset.
                                   atmImaStatsImaViolations 1.3.6.1.4.1.1751.2.18.11.8.1.3 integer32 read-only
ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition.
                                   atmImaStatsOifAnomalies 1.3.6.1.4.1.1751.2.18.11.8.1.4 integer32 read-only
The number of OIF anomalies during non-SES-IMA condition at the near-end.
                                   atmImaStatsNeTxNumFailures 1.3.6.1.4.1.1751.2.18.11.8.1.5 integer32 read-only
The number of times a near-end transmit failure alarm condition has been entered on this link.
                                   atmImaStatsNeRxNumFailures 1.3.6.1.4.1.1751.2.18.11.8.1.6 integer32 read-only
The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA).
                                   atmImaStatsFeTxNumFailures 1.3.6.1.4.1.1751.2.18.11.8.1.7 integer32 read-only
The number of times a far-end transmit failure alarm condition has been entered on this link.
                                   atmImaStatsFeRxNumFailures 1.3.6.1.4.1.1751.2.18.11.8.1.8 integer32 read-only
The number of times a far-end receive failure alarm condition has been entered on this link (i.e. LIF, LODS, Mis-Connected, RDI-IMA).
                                   atmImaStatsTxStuffs 1.3.6.1.4.1.1751.2.18.11.8.1.9 integer32 read-only
Counts of stuff events inserted in the transmit direction.
                                   atmImaStatsRxStuffs 1.3.6.1.4.1.1751.2.18.11.8.1.10 integer32 read-only
Counts of stuff events detected in the receive direction.
                           ilmiStatsTable 1.3.6.1.4.1.1751.2.18.11.9 no-access
Table of statistics for an ILMI enabled interface.
                               ilmiStatsEntry 1.3.6.1.4.1.1751.2.18.11.9.1 no-access
Row definition for the ILMI statistics table.
                                   ilmiStatsId 1.3.6.1.4.1.1751.2.18.11.9.1.1 intfindex no-access
Interface index (SSPPCCC) for the ILMI interface.
                                   ilmiStatsTimer 1.3.6.1.4.1.1751.2.18.11.9.1.2 integer32 read-only
Time, in seconds, since last statistics reset.
                                   ilmiStatsLinkResets 1.3.6.1.4.1.1751.2.18.11.9.1.3 integer32 read-only
Times connectivity has toggled between down and up.
                                   ilmiStatsAttachPtChanged 1.3.6.1.4.1.1751.2.18.11.9.1.4 integer32 read-only
Times Attachment Point change was detected.
                                   ilmiStatsAttachPtVerified 1.3.6.1.4.1.1751.2.18.11.9.1.5 integer32 read-only
Times Attachment Point was verified successfully.
                                   ilmiStatsSecureLnkProcInit 1.3.6.1.4.1.1751.2.18.11.9.1.6 integer32 read-only
Times Secure Link Procedure was initiated.
                                   ilmiStatsColdStartRx 1.3.6.1.4.1.1751.2.18.11.9.1.7 integer32 read-only
Times Cold Start trap was received.
                                   ilmiStatsColdStartTx 1.3.6.1.4.1.1751.2.18.11.9.1.8 integer32 read-only
Times Cold Start trap was transmitted.
                                   ilmiStatsPduRx 1.3.6.1.4.1.1751.2.18.11.9.1.9 integer32 read-only
ilmi pdu received
                                   ilmiStatsPduTx 1.3.6.1.4.1.1751.2.18.11.9.1.10 integer32 read-only
ilmi pdu transmitted
                                   ilmiStatsReqTimeouts 1.3.6.1.4.1.1751.2.18.11.9.1.11 integer32 read-only
Times getRequest of any type timed out.
                                   ilmiStatsPacketDisc 1.3.6.1.4.1.1751.2.18.11.9.1.12 integer32 read-only
Times a received packet was discarded.
                           viprStatsTable 1.3.6.1.4.1.1751.2.18.11.10 no-access
The table which holds viprStatsEntry data.
                                 viprStatsEntry 1.3.6.1.4.1.1751.2.18.11.10.1 no-access
A table entry for VPN related statistics information.
                                     viprStatsReset 1.3.6.1.4.1.1751.2.18.11.10.1.1 integer read-write
A SNMP set action to reset VPN related statistics info. Enumeration: 'reset': 1.
                                     viprStatsPacketsRxHi 1.3.6.1.4.1.1751.2.18.11.10.1.2 integer32 read-only
Good packets received from the backplane
                                     viprStatsPacketsRxLo 1.3.6.1.4.1.1751.2.18.11.10.1.3 integer32 read-only
Good packets received from the backplane
                                     viprStatsPacketsTxHi 1.3.6.1.4.1.1751.2.18.11.10.1.4 integer32 read-only
packets transmitted to the backplane
                                     viprStatsPacketsTxLo 1.3.6.1.4.1.1751.2.18.11.10.1.5 integer32 read-only
packets transmitted to the backplane
                                     viprStatsMismatchCrcHi 1.3.6.1.4.1.1751.2.18.11.10.1.6 integer32 read-only
packets received has been dropped due to a mismached CRC
                                     viprStatsMismatchCrcLo 1.3.6.1.4.1.1751.2.18.11.10.1.7 integer32 read-only
packets received has been dropped due to a mismached CRC
                                     viprStatsInsufficientPcktsHi 1.3.6.1.4.1.1751.2.18.11.10.1.8 integer32 read-only
packet received length is greater than the number of cells received
                                     viprStatsInsufficientPcktsLo 1.3.6.1.4.1.1751.2.18.11.10.1.9 integer32 read-only
packet received length is greater than the number of cells received
                                     viprStatsExceedAal5CellsHi 1.3.6.1.4.1.1751.2.18.11.10.1.10 integer32 read-only
number of cells received is greater than the actual length of the aal5
                                     viprStatsExceedAal5CellsLo 1.3.6.1.4.1.1751.2.18.11.10.1.11 integer32 read-only
number of cells received is greater than the actual length of the aal5
                                     viprStatsPrototypeErrorsHi 1.3.6.1.4.1.1751.2.18.11.10.1.12 integer32 read-only
unrecognized encapsulation type
                                     viprStatsPrototypeErrorsLo 1.3.6.1.4.1.1751.2.18.11.10.1.13 integer32 read-only
unrecognized encapsulation type
                                     viprStatsArpProtoRxHi 1.3.6.1.4.1.1751.2.18.11.10.1.14 integer32 read-only
ARP received
                                     viprStatsArpProtoRxLo 1.3.6.1.4.1.1751.2.18.11.10.1.15 integer32 read-only
ARP received
                                     viprStatsIPInHdrErrorsHi 1.3.6.1.4.1.1751.2.18.11.10.1.16 integer32 read-only
IP packeted received has a bad header
                                     viprStatsIPInHdrErrorsLo 1.3.6.1.4.1.1751.2.18.11.10.1.17 integer32 read-only
IP packeted received has a bad header
                                     viprStatsIPInAddrErrorsHi 1.3.6.1.4.1.1751.2.18.11.10.1.18 integer32 read-only
IP packeted received has a bad IP Address
                                     viprStatsIPInAddrErrorsLo 1.3.6.1.4.1.1751.2.18.11.10.1.19 integer32 read-only
IP packeted received has a bad IP Address
                           virtualIntfStatsTable 1.3.6.1.4.1.1751.2.18.11.11 no-access
Table of Virtual Interfaces Configurations
                                 virtualIntfStatsEntry 1.3.6.1.4.1.1751.2.18.11.11.1 no-access
Index is the Interface and the Virutal Interface
                                     virtualIntfStatsIf 1.3.6.1.4.1.1751.2.18.11.11.1.1 intfindex no-access
Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     virtualIntfStatsVi 1.3.6.1.4.1.1751.2.18.11.11.1.2 integer no-access
VI value. Def Val is 1 because 0 cannot be configured
                                     virtualIntfStatsEgrCellCount 1.3.6.1.4.1.1751.2.18.11.11.1.3 integer32 read-only
Egress Cell Count on VI
                                     virtualIntfStatsTimer 1.3.6.1.4.1.1751.2.18.11.11.1.4 integer32 read-only
Time, in seconds, since last reset.
                                     virtualIntfStatsReset 1.3.6.1.4.1.1751.2.18.11.11.1.5 integer read-write
stats reset field. Enumeration: 'reset': 1.
                           vuniIlmiStatsTable 1.3.6.1.4.1.1751.2.18.11.12 no-access
Table of statistics for an ILMI enabled interface.
                                 vuniIlmiStatsEntry 1.3.6.1.4.1.1751.2.18.11.12.1 no-access
Row definition for the ILMI statistics table.
                                     vuniIlmiStatsId 1.3.6.1.4.1.1751.2.18.11.12.1.1 intfindex no-access
Interface index (SSPPCCC) for the ILMI interface.
                                     vuniIlmiVUNIId 1.3.6.1.4.1.1751.2.18.11.12.1.2 integer no-access
Virtual UNI number, second index to access the ILMI on virtual UNI interface.
                                     vuniIlmiStatsTimer 1.3.6.1.4.1.1751.2.18.11.12.1.3 integer32 read-only
Time, in seconds, since last statistics reset.
                                     vuniIlmiStatsLinkResets 1.3.6.1.4.1.1751.2.18.11.12.1.4 integer32 read-only
Times connectivity has toggled between down and up.
                                     vuniIlmiStatsAttachPtChanged 1.3.6.1.4.1.1751.2.18.11.12.1.5 integer32 read-only
Times Attachment Point change was detected.
                                     vuniIlmiStatsAttachPtVerified 1.3.6.1.4.1.1751.2.18.11.12.1.6 integer32 read-only
Times Attachment Point was verified successfully.
                                     vuniIlmiStatsSecureLnkProcInit 1.3.6.1.4.1.1751.2.18.11.12.1.7 integer32 read-only
Times Secure Link Procedure was initiated.
                                     vuniIlmiStatsColdStartRx 1.3.6.1.4.1.1751.2.18.11.12.1.8 integer32 read-only
Times Cold Start trap was received.
                                     vuniIlmiStatsColdStartTx 1.3.6.1.4.1.1751.2.18.11.12.1.9 integer32 read-only
Times Cold Start trap was transmitted.
                                     vuniIlmiStatsPduRx 1.3.6.1.4.1.1751.2.18.11.12.1.10 integer32 read-only
vuniIlmi pdu received
                                     vuniIlmiStatsPduTx 1.3.6.1.4.1.1751.2.18.11.12.1.11 integer32 read-only
vuniIlmi pdu transmitted
                                     vuniIlmiStatsReqTimeouts 1.3.6.1.4.1.1751.2.18.11.12.1.12 integer32 read-only
Times getRequest of any type timed out.
                                     vuniIlmiStatsPacketDisc 1.3.6.1.4.1.1751.2.18.11.12.1.13 integer32 read-only
Times a received packet was discarded.
                                     vuniResetIlmiStatistics 1.3.6.1.4.1.1751.2.18.11.12.1.14 integer read-write
Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC) and vuni Id Enumeration: 'reset': 2, 'noAction': 1.
                     connectionStatistics 1.3.6.1.4.1.1751.2.18.12
                           atmPvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.1 no-access
Table of statistics for a channel connection
                               atmPvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.1.1 no-access
Row definition for the connection statistics table
                                   atmPvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.1.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   atmPvcVccStatsVpiA 1.3.6.1.4.1.1751.2.18.12.1.1.2 integer no-access
VPI on side A
                                   atmPvcVccStatsVciA 1.3.6.1.4.1.1751.2.18.12.1.1.3 integer no-access
VCI on side A
                                   atmPvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.1.1.4 intfindex no-access
Interface index (SSPPCCC) on side B
                                   atmPvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.1.1.5 integer no-access
VPI on side B
                                   atmPvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.1.1.6 integer no-access
VCI on side B
                                   atmPvcVccStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.1.1.7 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVccStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.1.1.8 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.1.1.9 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.1.1.10 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.1.1.11 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.1.1.12 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.1.1.13 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.1.1.14 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.1.1.15 integer32 read-only
Number of seconds stats have been collecting
                                   atmPvcVccStatsFrwdErrCrrctnRateA2B 1.3.6.1.4.1.1751.2.18.12.1.1.16 integer read-only
Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                   atmPvcVccStatsFrwdErrCrrctnRateB2A 1.3.6.1.4.1.1751.2.18.12.1.1.17 integer read-only
Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                   atmPvcVccStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.1.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVccStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.1.1.19 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.1.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.1.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.1.1.22 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.1.1.23 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.1.1.24 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.1.1.25 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.1.1.26 integer32 read-only
Number of seconds since odometer was reset.
                                   atmPvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.1.1.27 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   atmPvcVccStatsOamAisTxA 1.3.6.1.4.1.1751.2.18.12.1.1.28 integer32 read-only
Number of AIS cells transmitted.
                                   atmPvcVccStatsOamAisRxA 1.3.6.1.4.1.1751.2.18.12.1.1.29 integer32 read-only
Number of AIS cells received.
                                   atmPvcVccStatsOamRdiTxA 1.3.6.1.4.1.1751.2.18.12.1.1.30 integer32 read-only
Number of RDI cells transmitted.
                                   atmPvcVccStatsOamRdiRxA 1.3.6.1.4.1.1751.2.18.12.1.1.31 integer32 read-only
Number of RDI cells received.
                                   atmPvcVccStatsOamAisTxB 1.3.6.1.4.1.1751.2.18.12.1.1.32 integer32 read-only
Number of AIS cells transmitted.
                                   atmPvcVccStatsOamAisRxB 1.3.6.1.4.1.1751.2.18.12.1.1.33 integer32 read-only
Number of AIS cells received.
                                   atmPvcVccStatsOamRdiTxB 1.3.6.1.4.1.1751.2.18.12.1.1.34 integer32 read-only
Number of RDI cells transmitted.
                                   atmPvcVccStatsOamRdiRxB 1.3.6.1.4.1.1751.2.18.12.1.1.35 integer32 read-only
Number of RDI cells received.
                                   atmPvcVccStatsCellsDroppedA 1.3.6.1.4.1.1751.2.18.12.1.1.36 integer32 read-only
Cells Dropped on the Incoming side of A
                                   atmPvcVccStatsCellsTaggedA 1.3.6.1.4.1.1751.2.18.12.1.1.37 integer32 read-only
Cells Tagged on the Incoming side of A
                                   atmPvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.1.1.38 integer32 read-only
Cells Dropped on the Incoming side of B
                                   atmPvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.1.1.39 integer32 read-only
Cells Tagged on the Incoming side of B
                           atmPvcVpcStatsTable 1.3.6.1.4.1.1751.2.18.12.2 no-access
Table of statistics for a channel connection
                               atmPvcVpcStatsEntry 1.3.6.1.4.1.1751.2.18.12.2.1 no-access
Row definition for the connection statistics table
                                   atmPvcVpcStatsIfA 1.3.6.1.4.1.1751.2.18.12.2.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   atmPvcVpcStatsVpiA 1.3.6.1.4.1.1751.2.18.12.2.1.2 integer no-access
VPI on side A
                                   atmPvcVpcStatsIfB 1.3.6.1.4.1.1751.2.18.12.2.1.3 intfindex no-access
Interface index (SSPPCCC) on side A
                                   atmPvcVpcStatsVpiB 1.3.6.1.4.1.1751.2.18.12.2.1.4 integer no-access
VPI on side B
                                   atmPvcVpcStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.2.1.5 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.2.1.6 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.2.1.7 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.2.1.8 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.2.1.9 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.2.1.10 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.2.1.11 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.2.1.12 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsTimer 1.3.6.1.4.1.1751.2.18.12.2.1.13 integer32 read-only
Number of seconds stats have been collecting
                                   atmPvcVpcStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.2.1.14 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.2.1.15 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.2.1.16 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.2.1.17 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.2.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.2.1.19 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmPvcVpcStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.2.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.2.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmPvcVpcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.2.1.22 integer32 read-only
Number of seconds since odometer was reset.
                                   atmPvcVpcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.2.1.23 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   atmPvcVpcStatsOamAisTxA 1.3.6.1.4.1.1751.2.18.12.2.1.24 integer32 read-only
Number of AIS cells transmitted.
                                   atmPvcVpcStatsOamAisRxA 1.3.6.1.4.1.1751.2.18.12.2.1.25 integer32 read-only
Number of AIS cells received.
                                   atmPvcVpcStatsOamRdiTxA 1.3.6.1.4.1.1751.2.18.12.2.1.26 integer32 read-only
Number of RDI cells transmitted.
                                   atmPvcVpcStatsOamRdiRxA 1.3.6.1.4.1.1751.2.18.12.2.1.27 integer32 read-only
Number of RDI cells received.
                                   atmPvcVpcStatsOamAisTxB 1.3.6.1.4.1.1751.2.18.12.2.1.28 integer32 read-only
Number of AIS cells transmitted.
                                   atmPvcVpcStatsOamAisRxB 1.3.6.1.4.1.1751.2.18.12.2.1.29 integer32 read-only
Number of AIS cells received.
                                   atmPvcVpcStatsOamRdiTxB 1.3.6.1.4.1.1751.2.18.12.2.1.30 integer32 read-only
Number of RDI cells transmitted.
                                   atmPvcVpcStatsOamRdiRxB 1.3.6.1.4.1.1751.2.18.12.2.1.31 integer32 read-only
Number of RDI cells received.
                                   atmPvcVpcStatsCellsDroppedA 1.3.6.1.4.1.1751.2.18.12.2.1.32 integer32 read-only
Cells Dropped on the Incoming side of A
                                   atmPvcVpcStatsCellsTaggedA 1.3.6.1.4.1.1751.2.18.12.2.1.33 integer32 read-only
Cells Tagged on the Incoming side of A
                                   atmPvcVpcStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.2.1.34 integer32 read-only
Cells Dropped on the Incoming side of B
                                   atmPvcVpcStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.2.1.35 integer32 read-only
Cells Tagged on the Incoming side of B
                           atmSvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.3 no-access
Table of statistics for a channel connection
                               atmSvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.3.1 no-access
Row definition for the connection statistics table
                                   atmSvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.3.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   atmSvcVccStatsVpiA 1.3.6.1.4.1.1751.2.18.12.3.1.2 integer no-access
VPI on side A
                                   atmSvcVccStatsVciA 1.3.6.1.4.1.1751.2.18.12.3.1.3 integer no-access
VCI on side A
                                   atmSvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.3.1.4 intfindex no-access
Interface index (SSPPCCC) on side A
                                   atmSvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.3.1.5 integer no-access
VPI on side B
                                   atmSvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.3.1.6 integer no-access
VCI on side B
                                   atmSvcVccStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.3.1.7 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.3.1.8 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.3.1.9 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.3.1.10 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.3.1.11 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.3.1.12 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.3.1.13 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.3.1.14 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.3.1.15 integer32 read-only
Number of seconds stats have been collecting
                                   atmSvcVccStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.3.1.16 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.3.1.17 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.3.1.18 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.3.1.19 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.3.1.20 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.3.1.21 integer32 read-only
Valid cells received (Input Billing Count)
                                   atmSvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.3.1.22 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.3.1.23 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   atmSvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.3.1.24 integer32 read-only
Number of seconds since odometer was reset.
                                   atmSvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.3.1.25 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   atmSvcVccStatsCellsDroppedA 1.3.6.1.4.1.1751.2.18.12.3.1.26 integer32 read-only
Cells Dropped on the Incoming side of A
                                   atmSvcVccStatsCellsTaggedA 1.3.6.1.4.1.1751.2.18.12.3.1.27 integer32 read-only
Cells Tagged on the Incoming side of A
                                   atmSvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.3.1.28 integer32 read-only
Cells Dropped on the Incoming side of B
                                   atmSvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.3.1.29 integer32 read-only
Cells Tagged on the Incoming side of B
                           ipAtmAppPvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.4 no-access
Table of Statistics entries
                               ipAtmAppPvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.4.1 no-access
Row definition for statistics attribution.
                                   ipAtmAppPvcVccStatsDestAddrA 1.3.6.1.4.1.1751.2.18.12.4.1.1 ipaddress no-access
Statistics destination IP address
                                   ipAtmAppPvcVccStatsSubnetMaskA 1.3.6.1.4.1.1751.2.18.12.4.1.2 ipaddress no-access
The subnet mask of the destination IP address. Value is an IP address.
                                   ipAtmAppPvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.4.1.3 intfindex no-access
Interface index (SSPPCCC) on side B
                                   ipAtmAppPvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.4.1.4 integer no-access
VPI on side B
                                   ipAtmAppPvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.4.1.5 integer no-access
VCI on side B
                                   ipAtmAppPvcVccStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.4.1.6 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.4.1.7 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.4.1.8 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.4.1.9 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsFramesInB 1.3.6.1.4.1.1751.2.18.12.4.1.10 integer32 read-only
number of frames received on side B.
                                   ipAtmAppPvcVccStatsFramesOutB 1.3.6.1.4.1.1751.2.18.12.4.1.11 integer32 read-only
number of frames sent from side B.
                                   ipAtmAppPvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.4.1.12 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.4.1.13 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.4.1.14 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.4.1.15 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.4.1.16 integer32 read-only
Number of seconds stats have been collecting
                                   ipAtmAppPvcVccStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.4.1.17 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.4.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.4.1.19 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.4.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsOdometerFramesInB 1.3.6.1.4.1.1751.2.18.12.4.1.21 integer32 read-only
Valid frames received at side B.
                                   ipAtmAppPvcVccStatsOdometerFramesOutB 1.3.6.1.4.1.1751.2.18.12.4.1.22 integer32 read-only
Valid frames transmitted from side B.
                                   ipAtmAppPvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.4.1.23 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.4.1.24 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppPvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.4.1.25 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.4.1.26 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppPvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.4.1.27 integer32 read-only
Number of seconds since odometer was reset.
                                   ipAtmAppPvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.4.1.28 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   ipAtmAppPvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.4.1.29 integer32 read-only
Cells Dropped on the Incoming side of B
                                   ipAtmAppPvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.4.1.30 integer32 read-only
Cells Tagged on the Incoming side of B
                           ipAtmAppSvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.5 no-access
Table of statistics entries
                               ipAtmAppSvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.5.1 no-access
Row definition of statistics attributes.
                                   ipAtmAppSvcVccStatsDestAddrA 1.3.6.1.4.1.1751.2.18.12.5.1.1 ipaddress no-access
Statistics destination IP address
                                   ipAtmAppSvcVccStatsSubnetMaskA 1.3.6.1.4.1.1751.2.18.12.5.1.2 ipaddress no-access
The subnet mask of the destination IP address. Value is an IP address.
                                   ipAtmAppSvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.5.1.3 intfindex no-access
Interface index (SSPPCCC) on side B
                                   ipAtmAppSvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.5.1.4 integer no-access
VPI on side B
                                   ipAtmAppSvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.5.1.5 integer no-access
VCI on side B
                                   ipAtmAppSvcVccStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.5.1.6 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppSvcVccStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.5.1.7 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppSvcVccStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.5.1.8 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppSvcVccStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.5.1.9 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppSvcVccStatsFramesInB 1.3.6.1.4.1.1751.2.18.12.5.1.10 integer32 read-only
Frames received at side B.
                                   ipAtmAppSvcVccStatsFramesOutB 1.3.6.1.4.1.1751.2.18.12.5.1.11 integer32 read-only
Frames transmitted from side B.
                                   ipAtmAppSvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.5.1.12 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppSvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.5.1.13 integer32 read-only
Valid cells received (Input Billing Count)
                                   ipAtmAppSvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.5.1.14 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppSvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.5.1.15 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   ipAtmAppSvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.5.1.16 integer32 read-only
Number of seconds stats have been collecting
                                   ipAtmAppSvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.5.1.17 integer32 read-only
Cells Dropped on the Incoming side of B
                                   ipAtmAppSvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.5.1.18 integer32 read-only
Cells Tagged on the Incoming side of B
                           cirEmAtmPvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.6 no-access
Table of statistics for a channel connection
                               cirEmAtmPvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.6.1 no-access
Row definition for the connection statistics table
                                   cirEmAtmPvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.6.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   cirEmAtmPvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.6.1.2 intfindex no-access
Interface index (SSPPCCC) on side A
                                   cirEmAtmPvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.6.1.3 integer no-access
VPI on side B
                                   cirEmAtmPvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.6.1.4 integer no-access
VCI on side B
                                   cirEmAtmPvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.6.1.5 integer32 read-only
Cells encoded on side A- (High order portion)
                                   cirEmAtmPvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.6.1.6 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   cirEmAtmPvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.6.1.7 integer32 read-only
Cells decoded on side A- (High order portion)
                                   cirEmAtmPvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.6.1.8 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   cirEmAtmPvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.6.1.9 integer32 read-only
Valid cells received (Input Billing Count)
                                   cirEmAtmPvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.6.1.10 integer32 read-only
Valid cells received (Input Billing Count)
                                   cirEmAtmPvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.6.1.11 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   cirEmAtmPvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.6.1.12 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   cirEmAtmPvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.6.1.13 integer32 read-only
Number of seconds stats have been collecting
                                   cirEmAtmPvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.6.1.14 integer32 read-only
Cells encoded on side A- (High order portion)
                                   cirEmAtmPvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.6.1.15 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   cirEmAtmPvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.6.1.16 integer32 read-only
Cells decoded on side A- (High order portion)
                                   cirEmAtmPvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.6.1.17 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   cirEmAtmPvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.6.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                   cirEmAtmPvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.6.1.19 integer32 read-only
Valid cells received (Input Billing Count)
                                   cirEmAtmPvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.6.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   cirEmAtmPvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.6.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   cirEmAtmPvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.6.1.22 integer32 read-only
Number of seconds since odometer was reset.
                                   cirEmAtmPvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.6.1.23 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   cirEmAtmPvcVccStatsOamAisTx 1.3.6.1.4.1.1751.2.18.12.6.1.24 integer32 read-only
Number of AIS cells transmitted.
                                   cirEmAtmPvcVccStatsOamAisRx 1.3.6.1.4.1.1751.2.18.12.6.1.25 integer32 read-only
Number of AIS cells received.
                                   cirEmAtmPvcVccStatsOamRdiTx 1.3.6.1.4.1.1751.2.18.12.6.1.26 integer32 read-only
Number of RDI cells transmitted.
                                   cirEmAtmPvcVccStatsOamRdiRx 1.3.6.1.4.1.1751.2.18.12.6.1.27 integer32 read-only
Number of RDI cells received.
                                   cirEmAtmPvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.6.1.28 integer32 read-only
Cells Dropped on the Incoming side of B
                                   cirEmAtmPvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.6.1.29 integer32 read-only
Cells Tagged on the Incoming side of B
                           frAtmPvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.7 no-access
Table of statistics for a channel connection
                               frAtmPvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.7.1 no-access
Row definition for the connection statistics table
                                   frAtmPvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.7.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   frAtmPvcVccStatsDlciA 1.3.6.1.4.1.1751.2.18.12.7.1.2 integer no-access
dlci - side A
                                   frAtmPvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.7.1.3 intfindex no-access
Interface index (SSPPCCC) on side B
                                   frAtmPvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.7.1.4 integer no-access
VPI on side B
                                   frAtmPvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.7.1.5 integer no-access
VCI on side B
                                   frAtmPvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.7.1.6 integer32 read-only
Cells encoded on side A- (High order portion)
                                   frAtmPvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.7.1.7 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   frAtmPvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.7.1.8 integer32 read-only
Cells decoded on side A- (High order portion)
                                   frAtmPvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.7.1.9 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   frAtmPvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.7.1.10 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmPvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.7.1.11 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmPvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.7.1.12 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmPvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.7.1.13 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmPvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.7.1.14 integer32 read-only
Number of seconds stats have been collecting
                                   frAtmPvcVccStatsFramesDroppedA 1.3.6.1.4.1.1751.2.18.12.7.1.15 integer32 read-only
Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side.
                                   frAtmPvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.7.1.16 integer32 read-only
Cells encoded on side A- (High order portion)
                                   frAtmPvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.7.1.17 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   frAtmPvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.7.1.18 integer32 read-only
Cells decoded on side A- (High order portion)
                                   frAtmPvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.7.1.19 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   frAtmPvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.7.1.20 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmPvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.7.1.21 integer32 read-only
Valid cells received (Input Billing Count)
                                   frAtmPvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.7.1.22 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmPvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.7.1.23 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   frAtmPvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.7.1.24 integer32 read-only
Number of seconds since odometer was reset.
                                   frAtmPvcVccStatsOdometerFramesDroppedA 1.3.6.1.4.1.1751.2.18.12.7.1.25 integer32 read-only
Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side.
                                   frAtmPvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.7.1.26 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   frAtmPvcVccStatsOamAisTx 1.3.6.1.4.1.1751.2.18.12.7.1.27 integer32 read-only
Number of AIS cells transmitted.
                                   frAtmPvcVccStatsOamAisRx 1.3.6.1.4.1.1751.2.18.12.7.1.28 integer32 read-only
Number of AIS cells received.
                                   frAtmPvcVccStatsOamRdiTx 1.3.6.1.4.1.1751.2.18.12.7.1.29 integer32 read-only
Number of RDI cells transmitted.
                                   frAtmPvcVccStatsOamRdiRx 1.3.6.1.4.1.1751.2.18.12.7.1.30 integer32 read-only
Number of RDI cells received.
                                   frAtmPvcVccStatsAal5ErrFramesA 1.3.6.1.4.1.1751.2.18.12.7.1.31 integer32 read-only
Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side
                                   frAtmPvcVccStatsFramesTaggedA 1.3.6.1.4.1.1751.2.18.12.7.1.32 integer32 read-only
Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side
                                   frAtmPvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.7.1.33 integer32 read-only
Cells Dropped on the Incoming side of B
                                   frAtmPvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.7.1.34 integer32 read-only
Cells Tagged on the Incoming side of B
                           frFrPvcStatsTable 1.3.6.1.4.1.1751.2.18.12.8 no-access
Table of statistics for a channel connection
                               frFrPvcStatsEntry 1.3.6.1.4.1.1751.2.18.12.8.1 no-access
Row definition for the connection statistics table
                                   frFrPvcStatsIfA 1.3.6.1.4.1.1751.2.18.12.8.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   frFrPvcStatsDlciA 1.3.6.1.4.1.1751.2.18.12.8.1.2 integer no-access
dlci - side A
                                   frFrPvcStatsIfB 1.3.6.1.4.1.1751.2.18.12.8.1.3 intfindex no-access
Interface index (SSPPCCC) on side B
                                   frFrPvcStatsDlciB 1.3.6.1.4.1.1751.2.18.12.8.1.4 integer no-access
dlci - side B
                                   frFrPvcStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.8.1.5 integer32 read-only
Cells encoded on side A- (High order portion)
                                   frFrPvcStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.8.1.6 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   frFrPvcStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.8.1.7 integer32 read-only
Cells decoded on side A- (High order portion)
                                   frFrPvcStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.8.1.8 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   frFrPvcStatsCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.8.1.9 integer32 read-only
Cells encoded on side B- (High order portion)
                                   frFrPvcStatsCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.8.1.10 integer32 read-only
Cells encoded on side B- (Low order portion)
                                   frFrPvcStatsCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.8.1.11 integer32 read-only
Cells decoded on side B- (High order portion)
                                   frFrPvcStatsCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.8.1.12 integer32 read-only
Cells decoded on side B- (Low order portion)
                                   frFrPvcStatsTimer 1.3.6.1.4.1.1751.2.18.12.8.1.13 integer32 read-only
Number of seconds stats have been collecting
                                   frFrPvcStatsFramesDroppedA 1.3.6.1.4.1.1751.2.18.12.8.1.14 integer32 read-only
Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side.
                                   frFrPvcStatsFramesDroppedB 1.3.6.1.4.1.1751.2.18.12.8.1.15 integer32 read-only
Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side.
                                   frFrPvcStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.8.1.16 integer32 read-only
Cells encoded on side A- (High order portion)
                                   frFrPvcStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.8.1.17 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   frFrPvcStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.8.1.18 integer32 read-only
Cells decoded on side A- (High order portion)
                                   frFrPvcStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.8.1.19 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   frFrPvcStatsOdometerCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.8.1.20 integer32 read-only
Cells encoded on side B- (High order portion)
                                   frFrPvcStatsOdometerCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.8.1.21 integer32 read-only
Cells encoded on side B- (Low order portion)
                                   frFrPvcStatsOdometerCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.8.1.22 integer32 read-only
Cells decoded on side B- (High order portion)
                                   frFrPvcStatsOdometerCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.8.1.23 integer32 read-only
Cells decoded on side B- (Low order portion)
                                   frFrPvcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.8.1.24 integer32 read-only
Number of seconds since odometer was reset.
                                   frFrPvcStatsOdometerFramesDroppedA 1.3.6.1.4.1.1751.2.18.12.8.1.25 integer32 read-only
Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side.
                                   frFrPvcStatsOdometerFramesDroppedB 1.3.6.1.4.1.1751.2.18.12.8.1.26 integer32 read-only
Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side.
                                   frFrPvcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.8.1.27 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   frFrPvcStatsAal5ErrFramesA 1.3.6.1.4.1.1751.2.18.12.8.1.28 integer32 read-only
Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side
                                   frFrPvcStatsAal5ErrFramesB 1.3.6.1.4.1.1751.2.18.12.8.1.29 integer32 read-only
Number of Aal5 Errored Frames, which are not dropped due to UPC in B2A dir, only applicable to Input Side
                                   frFrPvcStatsFramesTaggedA 1.3.6.1.4.1.1751.2.18.12.8.1.30 integer32 read-only
Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side
                                   frFrPvcStatsFramesTaggedB 1.3.6.1.4.1.1751.2.18.12.8.1.31 integer32 read-only
Number of Frames tagged due to UPC in B2A dir, only applicable to Input Side
                           vbrAtmPvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.9 no-access
Table of statistics for a channel connection
                               vbrAtmPvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.9.1 no-access
Row definition for the connection statistics table
                                   vbrAtmPvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.9.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                   vbrAtmPvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.9.1.2 intfindex no-access
Interface index (SSPPCCC) on side A
                                   vbrAtmPvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.9.1.3 integer no-access
vpi - side B
                                   vbrAtmPvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.9.1.4 integer no-access
vci - side B
                                   vbrAtmPvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.9.1.5 integer32 read-only
Cells encoded on side A- (High order portion)
                                   vbrAtmPvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.9.1.6 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   vbrAtmPvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.9.1.7 integer32 read-only
Cells decoded on side A- (High order portion)
                                   vbrAtmPvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.9.1.8 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   vbrAtmPvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.9.1.10 integer32 read-only
Valid cells received (Input Billing Count)
                                   vbrAtmPvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.9.1.11 integer32 read-only
Valid cells received (Input Billing Count)
                                   vbrAtmPvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.9.1.12 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   vbrAtmPvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.9.1.13 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   vbrAtmPvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.9.1.14 integer32 read-only
Number of seconds stats have been collecting
                                   vbrAtmPvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.9.1.15 integer32 read-only
Cells encoded on side A- (High order portion)
                                   vbrAtmPvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.9.1.16 integer32 read-only
Cells encoded on side A- (Low order portion)
                                   vbrAtmPvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.9.1.17 integer32 read-only
Cells decoded on side A- (High order portion)
                                   vbrAtmPvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.9.1.18 integer32 read-only
Cells decoded on side A- (Low order portion)
                                   vbrAtmPvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.9.1.19 integer32 read-only
Valid cells received (Input Billing Count)
                                   vbrAtmPvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.9.1.20 integer32 read-only
Valid cells received (Input Billing Count)
                                   vbrAtmPvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.9.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   vbrAtmPvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.9.1.22 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                   vbrAtmPvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.9.1.23 integer32 read-only
Number of seconds since odometer was reset.
                                   vbrAtmPvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.9.1.24 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                   vbrAtmPvcVccStatsOamAisTx 1.3.6.1.4.1.1751.2.18.12.9.1.25 integer32 read-only
Number of AIS cells transmitted.
                                   vbrAtmPvcVccStatsOamAisRx 1.3.6.1.4.1.1751.2.18.12.9.1.26 integer32 read-only
Number of AIS cells received.
                                   vbrAtmPvcVccStatsOamRdiTx 1.3.6.1.4.1.1751.2.18.12.9.1.27 integer32 read-only
Number of RDI cells transmitted.
                                   vbrAtmPvcVccStatsOamRdiRx 1.3.6.1.4.1.1751.2.18.12.9.1.28 integer32 read-only
Number of RDI cells received.
                                   vbrAtmPvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.9.1.29 integer32 read-only
Cells Dropped on the Incoming side of B
                                   vbrAtmPvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.9.1.30 integer32 read-only
Cells Tagged on the Incoming side of B
                           cirEmCirEmPvcStatsTable 1.3.6.1.4.1.1751.2.18.12.10 no-access
Table of statistics for a channel connection
                                 cirEmCirEmPvcStatsEntry 1.3.6.1.4.1.1751.2.18.12.10.1 no-access
Row definition for the connection statistics table
                                     cirEmCirEmPvcStatsIfA 1.3.6.1.4.1.1751.2.18.12.10.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                     cirEmCirEmPvcStatsIfB 1.3.6.1.4.1.1751.2.18.12.10.1.2 intfindex no-access
Interface index (SSPPCCC) on side A
                                     cirEmCirEmPvcStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.10.1.3 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.10.1.4 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.10.1.5 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.10.1.6 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.10.1.7 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.10.1.8 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.10.1.9 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.10.1.10 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsTimer 1.3.6.1.4.1.1751.2.18.12.10.1.11 integer32 read-only
Number of seconds stats have been collecting
                                     cirEmCirEmPvcStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.10.1.12 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.10.1.13 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.10.1.14 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.10.1.15 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.10.1.16 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.10.1.17 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.10.1.18 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsOdometerCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.10.1.19 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmCirEmPvcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.10.1.20 integer32 read-only
Number of seconds since odometer was reset.
                                     cirEmCirEmPvcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.10.1.21 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                           vbrVbrPvcStatsTable 1.3.6.1.4.1.1751.2.18.12.11 no-access
Table of statistics for a channel connection
                                 vbrVbrPvcStatsEntry 1.3.6.1.4.1.1751.2.18.12.11.1 no-access
Row definition for the connection statistics table
                                     vbrVbrPvcStatsIfA 1.3.6.1.4.1.1751.2.18.12.11.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                     vbrVbrPvcStatsIfB 1.3.6.1.4.1.1751.2.18.12.11.1.2 intfindex no-access
Interface index (SSPPCCC) on side A
                                     vbrVbrPvcStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.11.1.4 integer32 read-only
Cells encoded on side A- (High order portion)
                                     vbrVbrPvcStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.11.1.5 integer32 read-only
Cells encoded on side A- (Low order portion)
                                     vbrVbrPvcStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.11.1.6 integer32 read-only
Cells decoded on side A- (High order portion)
                                     vbrVbrPvcStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.11.1.7 integer32 read-only
Cells decoded on side A- (Low order portion)
                                     vbrVbrPvcStatsCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.11.1.9 integer32 read-only
Cells encoded on side B- (High order portion)
                                     vbrVbrPvcStatsCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.11.1.10 integer32 read-only
Cells encoded on side B- (Low order portion)
                                     vbrVbrPvcStatsCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.11.1.11 integer32 read-only
Cells decoded on side B- (High order portion)
                                     vbrVbrPvcStatsCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.11.1.12 integer32 read-only
Cells decoded on side B- (Low order portion)
                                     vbrVbrPvcStatsTimer 1.3.6.1.4.1.1751.2.18.12.11.1.13 integer32 read-only
Number of seconds stats have been collecting
                                     vbrVbrPvcStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.11.1.14 integer32 read-only
Cells encoded on side A- (High order portion)
                                     vbrVbrPvcStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.11.1.15 integer32 read-only
Cells encoded on side A- (Low order portion)
                                     vbrVbrPvcStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.11.1.16 integer32 read-only
Cells decoded on side A- (High order portion)
                                     vbrVbrPvcStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.11.1.17 integer32 read-only
Cells decoded on side A- (Low order portion)
                                     vbrVbrPvcStatsOdometerCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.11.1.18 integer32 read-only
Cells encoded on side B- (High order portion)
                                     vbrVbrPvcStatsOdometerCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.11.1.19 integer32 read-only
Cells encoded on side B- (Low order portion)
                                     vbrVbrPvcStatsOdometerCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.11.1.20 integer32 read-only
Cells decoded on side B- (High order portion)
                                     vbrVbrPvcStatsOdometerCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.11.1.21 integer32 read-only
Cells decoded on side B- (Low order portion)
                                     vbrVbrPvcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.11.1.22 integer32 read-only
Number of seconds since odometer was reset.
                                     vbrVbrPvcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.11.1.23 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                           bridgeBridgePvcStatsTable 1.3.6.1.4.1.1751.2.18.12.12 no-access
Table of bridge-bridge PVC connection statistics
                                 bridgeBridgePvcStatsEntry 1.3.6.1.4.1.1751.2.18.12.12.1 no-access
Row definition of statistics attributes
                                     bridgeBridgePvcStatsIfA 1.3.6.1.4.1.1751.2.18.12.12.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                     bridgeBridgePvcStatsIfB 1.3.6.1.4.1.1751.2.18.12.12.1.2 intfindex no-access
Interface index (SSPPCCC) on side B
                                     bridgeBridgePvcStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.12.1.3 integer32 read-only
Cells encoded on side A - (High order portion )
                                     bridgeBridgePvcStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.12.1.4 integer32 read-only
Cells encoded on side A - ( Low order portion)
                                     bridgeBridgePvcStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.12.1.5 integer32 read-only
Cells decoded on side A - ( High order portion)
                                     bridgeBridgePvcStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.12.1.6 integer32 read-only
Cells decoded on side A - (Low order portion)
                                     bridgeBridgePvcStatsCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.12.1.7 integer32 read-only
Cells encoded on side B - (High order portion )
                                     bridgeBridgePvcStatsCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.12.1.8 integer32 read-only
Cells encoded on side B - (Low order portion )
                                     bridgeBridgePvcStatsCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.12.1.9 integer32 read-only
Cells decoded on side B - (High order portion )
                                     bridgeBridgePvcStatsCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.12.1.10 integer32 read-only
Cells decoded on side B -(Low order portion )
                                     bridgeBridgePvcStatsTimer 1.3.6.1.4.1.1751.2.18.12.12.1.11 integer32 read-only
Number of seconds stats have been collecting
                                     bridgeBridgePvcStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.12.1.12 integer32 read-only
Cells encoded on side A- (High order portion)
                                     bridgeBridgePvcStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.12.1.13 integer32 read-only
Cells encoded on side A- (Low order portion)
                                     bridgeBridgePvcStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.12.1.14 integer32 read-only
Cells decoded on side A- (High order portion)
                                     bridgeBridgePvcStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.12.1.15 integer32 read-only
Cells decoded on side A- (Low order portion)
                                     bridgeBridgePvcStatsOdometerCellsEncodedHiB 1.3.6.1.4.1.1751.2.18.12.12.1.16 integer32 read-only
Cells encoded on side B - (High order portion)
                                     bridgeBridgePvcStatsOdometerCellsEncodedLoB 1.3.6.1.4.1.1751.2.18.12.12.1.17 integer32 read-only
Cells encoded on side B - (Low order portion)
                                     bridgeBridgePvcStatsOdometerCellsDecodedHiB 1.3.6.1.4.1.1751.2.18.12.12.1.18 integer32 read-only
Cells decoded on side B - (High order portion)
                                     bridgeBridgePvcStatsOdometerCellsDecodedLoB 1.3.6.1.4.1.1751.2.18.12.12.1.19 integer32 read-only
Cells decoded on side B - (Low order portion)
                                     bridgeBridgePvcStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.12.1.20 integer32 read-only
Number of seconds since odometer was reset.
                                     bridgeBridgePvcStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.12.1.21 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                           bridgeAtmPvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.13 no-access
Table of statisics
                                 bridgeAtmPvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.13.1 no-access
Row definition for the connection statistics table
                                     bridgeAtmPvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.13.1.1 intfindex no-access
Interface index (SSPPCCC) on side A
                                     bridgeAtmPvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.13.1.2 intfindex no-access
Interface index (SSPPCCC) on side B
                                     bridgeAtmPvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.13.1.3 integer no-access
vpi - side B
                                     bridgeAtmPvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.13.1.4 integer no-access
vci - side B
                                     bridgeAtmPvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.13.1.5 integer32 read-only
number of cells encoded on side A - (High order portion).
                                     bridgeAtmPvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.13.1.6 integer32 read-only
number of cells encoded on side A - (Low order portion).
                                     bridgeAtmPvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.13.1.7 integer32 read-only
number of cells decoded on side A - (High order portion).
                                     bridgeAtmPvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.13.1.8 integer32 read-only
number of cells decoded on side A - (Low order portion).
                                     bridgeAtmPvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.13.1.9 integer32 read-only
Valid cells received (Input Billing Count)
                                     bridgeAtmPvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.13.1.10 integer32 read-only
Valid cells received (Input Billing Count)
                                     bridgeAtmPvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.13.1.11 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     bridgeAtmPvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.13.1.12 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     bridgeAtmPvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.13.1.13 integer32 read-only
Number of seconds stats have been collecting
                                     bridgeAtmPvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.13.1.14 integer32 read-only
Cells encoded on side A- (High order portion)
                                     bridgeAtmPvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.13.1.15 integer32 read-only
Cells encoded on side A- (Low order portion)
                                     bridgeAtmPvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.13.1.16 integer32 read-only
Cells decoded on side A- (High order portion)
                                     bridgeAtmPvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.13.1.17 integer32 read-only
Cells decoded on side A- (Low order portion)
                                     bridgeAtmPvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.13.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                     bridgeAtmPvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.13.1.19 integer32 read-only
Valid cells received (Input Billing Count)
                                     bridgeAtmPvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.13.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     bridgeAtmPvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.13.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     bridgeAtmPvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.13.1.22 integer32 read-only
Number of seconds since odometer was reset.
                                     bridgeAtmPvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.13.1.23 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                     bridgeAtmPvcVccStatsOamAisTx 1.3.6.1.4.1.1751.2.18.12.13.1.24 integer32 read-only
Number of AIS cells transmitted.
                                     bridgeAtmPvcVccStatsOamAisRx 1.3.6.1.4.1.1751.2.18.12.13.1.25 integer32 read-only
Number of AIS cells received.
                                     bridgeAtmPvcVccStatsOamRdiTx 1.3.6.1.4.1.1751.2.18.12.13.1.26 integer32 read-only
Number of RDI cells transmitted.
                                     bridgeAtmPvcVccStatsOamRdiRx 1.3.6.1.4.1.1751.2.18.12.13.1.27 integer32 read-only
Number of RDI cells received.
                                     bridgeAtmPvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.13.1.28 integer32 read-only
Cells Dropped on the Incoming side of B
                                     bridgeAtmPvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.13.1.29 integer32 read-only
Cells Tagged on the Incoming side of B
                           cirEmAtmSpvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.14 no-access
Table of statistics for a CES SPVC channel connection
                                 cirEmAtmSpvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.14.1 no-access
Row definition for the CES SPVC connection statistics table
                                     cirEmAtmSpvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.14.1.1 intfindex no-access
Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     cirEmAtmSpvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.14.1.2 intfindex no-access
Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     cirEmAtmSpvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.14.1.3 integer no-access
VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                     cirEmAtmSpvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.14.1.4 integer no-access
VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                     cirEmAtmSpvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.14.1.5 integer32 read-only
Cells encoded on side A - (High order portion )
                                     cirEmAtmSpvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.14.1.6 integer32 read-only
Cells encoded on side A - ( Low order portion)
                                     cirEmAtmSpvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.14.1.7 integer32 read-only
Cells decoded on side A - ( High order portion)
                                     cirEmAtmSpvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.14.1.8 integer32 read-only
Cells decoded on side A - (Low order portion)
                                     cirEmAtmSpvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.14.1.9 integer32 read-only
Valid Cells received on B - (High order portion)
                                     cirEmAtmSpvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.14.1.10 integer32 read-only
Valid Cells received on B - (Low order portion)
                                     cirEmAtmSpvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.14.1.11 integer32 read-only
Valid cells transmitted on B - (High order portion)
                                     cirEmAtmSpvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.14.1.12 integer32 read-only
Valid cells transmitted on B - (Low order portion)
                                     cirEmAtmSpvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.14.1.13 integer32 read-only
Number of seconds since stats have been collecting
                                     cirEmAtmSpvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.14.1.14 integer32 read-only
Cells encoded on side A- (High order portion)
                                     cirEmAtmSpvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.14.1.15 integer32 read-only
Cells encoded on side A- (Low order portion)
                                     cirEmAtmSpvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.14.1.16 integer32 read-only
Cells decoded on side A- (High order portion)
                                     cirEmAtmSpvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.14.1.17 integer32 read-only
Cells decoded on side A- (Low order portion)
                                     cirEmAtmSpvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.14.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmAtmSpvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.14.1.19 integer32 read-only
Valid cells received (Input Billing Count)
                                     cirEmAtmSpvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.14.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmAtmSpvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.14.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     cirEmAtmSpvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.14.1.22 integer32 read-only
Number of seconds since odometer was reset.
                                     cirEmAtmSpvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.14.1.23 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                     cirEmAtmSpvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.14.1.24 integer32 read-only
Cells Dropped on the Incoming side of B
                                     cirEmAtmSpvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.14.1.25 integer32 read-only
Cells Tagged on the Incoming side of B
                           vbrAtmSpvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.15 no-access
Table of statistics for a TE SPVC channel connection.
                                 vbrAtmSpvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.15.1 no-access
Row definition for the TE SPVC connection statistics table.
                                     vbrAtmSpvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.15.1.1 intfindex no-access
Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     vbrAtmSpvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.15.1.2 intfindex no-access
Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     vbrAtmSpvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.15.1.3 integer no-access
VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095.
                                     vbrAtmSpvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.15.1.4 integer no-access
VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535.
                                     vbrAtmSpvcVccStatsCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.15.1.5 integer32 read-only
Cells encoded on side A- (High order portion)
                                     vbrAtmSpvcVccStatsCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.15.1.6 integer32 read-only
ells encoded on side A - (Low order portion)
                                     vbrAtmSpvcVccStatsCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.15.1.7 integer32 read-only
Cells decoded on side A - (High order portion)
                                     vbrAtmSpvcVccStatsCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.15.1.8 integer32 read-only
Cells decoded on side A - (Low order portion)
                                     vbrAtmSpvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.15.1.9 integer32 read-only
Valid Cells received on B - (High order portion)
                                     vbrAtmSpvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.15.1.10 integer32 read-only
Valid Cells received on B - (Low order portion)
                                     vbrAtmSpvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.15.1.11 integer32 read-only
Valid cells transmitted on B -(High order portion)
                                     vbrAtmSpvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.15.1.12 integer32 read-only
Valid cells transmitted on B - (Low order portion)
                                     vbrAtmSpvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.15.1.13 integer32 read-only
Number of seconds stats have been collecting
                                     vbrAtmSpvcVccStatsOdometerCellsEncodedHiA 1.3.6.1.4.1.1751.2.18.12.15.1.14 integer32 read-only
Cells encoded on side A- (High order portion)
                                     vbrAtmSpvcVccStatsOdometerCellsEncodedLoA 1.3.6.1.4.1.1751.2.18.12.15.1.15 integer32 read-only
Cells encoded on side A- (Low order portion)
                                     vbrAtmSpvcVccStatsOdometerCellsDecodedHiA 1.3.6.1.4.1.1751.2.18.12.15.1.16 integer32 read-only
Cells decoded on side A- (High order portion)
                                     vbrAtmSpvcVccStatsOdometerCellsDecodedLoA 1.3.6.1.4.1.1751.2.18.12.15.1.17 integer32 read-only
Cells decoded on side A- (Low order portion)
                                     vbrAtmSpvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.15.1.18 integer32 read-only
Valid Cells received on B - (High order portion)
                                     vbrAtmSpvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.15.1.19 integer32 read-only
Valid Cells received on B - (Low order portion)
                                     vbrAtmSpvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.15.1.20 integer32 read-only
Valid Cells transmitted on B -(High order portion)
                                     vbrAtmSpvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.15.1.21 integer32 read-only
Valid Cells transmitted on B -(Low order portion)
                                     vbrAtmSpvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.15.1.22 integer32 read-only
Number of seconds since odometer was reset.
                                     vbrAtmSpvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.15.1.23 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                     vbrAtmSpvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.15.1.24 integer32 read-only
Cells Dropped on the Incoming side of B
                                     vbrAtmSpvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.15.1.25 integer32 read-only
Cells Tagged on the Incoming side of B
                           atmSpvcVccStatsTable 1.3.6.1.4.1.1751.2.18.12.16 no-access
Table of statistics for a ATM SPVC channel connection
                                 atmSpvcVccStatsEntry 1.3.6.1.4.1.1751.2.18.12.16.1 no-access
Row definition for the ATM SPVC connection statistics table
                                     atmSpvcVccStatsIfA 1.3.6.1.4.1.1751.2.18.12.16.1.1 intfindex no-access
Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     atmSpvcVccStatsVpiA 1.3.6.1.4.1.1751.2.18.12.16.1.2 integer no-access
VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095.
                                     atmSpvcVccStatsVciA 1.3.6.1.4.1.1751.2.18.12.16.1.3 integer no-access
VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535.
                                     atmSpvcVccStatsIfB 1.3.6.1.4.1.1751.2.18.12.16.1.4 intfindex no-access
Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                     atmSpvcVccStatsVpiB 1.3.6.1.4.1.1751.2.18.12.16.1.5 integer no-access
VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095.
                                     atmSpvcVccStatsVciB 1.3.6.1.4.1.1751.2.18.12.16.1.6 integer no-access
VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535.
                                     atmSpvcVccStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.16.1.7 integer32 read-only
Valid Cells received on A - (High order portion)
                                     atmSpvcVccStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.16.1.8 integer32 read-only
Valid Cells received on A - (Low order portion)
                                     atmSpvcVccStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.16.1.9 integer32 read-only
Valid cells transmitted on A -(High order portion)
                                     atmSpvcVccStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.16.1.10 integer32 read-only
Valid cells transmitted on A -(Low order portion)
                                     atmSpvcVccStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.16.1.11 integer32 read-only
Valid Cells received on B - (High order portion)
                                     atmSpvcVccStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.16.1.12 integer32 read-only
Valid Cells received on B - (Low order portion)
                                     atmSpvcVccStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.16.1.13 integer32 read-only
Valid cells transmitted on B -(High order portion)
                                     atmSpvcVccStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.16.1.14 integer32 read-only
Valid cells transmitted on B -(Low order portion)
                                     atmSpvcVccStatsTimer 1.3.6.1.4.1.1751.2.18.12.16.1.15 integer32 read-only
Number of seconds stats have been collecting
                                     atmSpvcVccStatsFrwdErrCrrctnRateA2B 1.3.6.1.4.1.1751.2.18.12.16.1.16 integer read-only
Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                     atmSpvcVccStatsFrwdErrCrrctnRateB2A 1.3.6.1.4.1.1751.2.18.12.16.1.17 integer read-only
Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user. Enumeration: 'quarterRate': 3, 'none': 1, 'eighthRate': 2, 'halfRate': 4.
                                     atmSpvcVccStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.16.1.18 integer32 read-only
Valid cells received (Input Billing Count)
                                     atmSpvcVccStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.16.1.19 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     atmSpvcVccStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.16.1.20 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     atmSpvcVccStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.16.1.21 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     atmSpvcVccStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.16.1.22 integer32 read-only
Valid cells received (Input Billing Count)
                                     atmSpvcVccStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.16.1.23 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     atmSpvcVccStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.16.1.24 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     atmSpvcVccStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.16.1.25 integer32 read-only
Valid cells transmitted (Output Billing Count)
                                     atmSpvcVccStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.16.1.26 integer32 read-only
Number of seconds since odometer was reset.
                                     atmSpvcVccStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.16.1.27 integer read-write
Odometer reset button. Enumeration: 'reset': 1.
                                     atmSpvcVccStatsCellsDroppedA 1.3.6.1.4.1.1751.2.18.12.16.1.28 integer32 read-only
Cells Dropped on the Incoming side of A
                                     atmSpvcVccStatsCellsTaggedA 1.3.6.1.4.1.1751.2.18.12.16.1.29 integer32 read-only
Cells Tagged on the Incoming side of A
                                     atmSpvcVccStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.16.1.30 integer32 read-only
Cells Dropped on the Incoming side of B
                                     atmSpvcVccStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.16.1.31 integer32 read-only
Cells Tagged on the Incoming side of B
                           viprSubChnlStatsTable 1.3.6.1.4.1.1751.2.18.12.17 no-access
The table which holds viprSubChnlStatsEntry data.
                                 viprSubChnlStatsEntry 1.3.6.1.4.1.1751.2.18.12.17.1 no-access
A table entry that contains IP interface sub channel statistics.
                                     viprSubChnlStatsInCellCountHiA 1.3.6.1.4.1.1751.2.18.12.17.1.1 integer32 read-only
cells received on rt interface from another conn
                                     viprSubChnlStatsInCellCountLoA 1.3.6.1.4.1.1751.2.18.12.17.1.2 integer32 read-only
cells received on rt interface from another conn
                                     viprSubChnlStatsOutCellCountHiA 1.3.6.1.4.1.1751.2.18.12.17.1.3 integer32 read-only
cells sent out of a rt interface to another dest
                                     viprSubChnlStatsOutCellCountLoA 1.3.6.1.4.1.1751.2.18.12.17.1.4 integer32 read-only
cells sent out of a rt interface to another dest
                                     viprSubChnlStatsInCellCountHiB 1.3.6.1.4.1.1751.2.18.12.17.1.5 integer32 read-only
cells received on atm/fr/bridge physical interface
                                     viprSubChnlStatsInCellCountLoB 1.3.6.1.4.1.1751.2.18.12.17.1.6 integer32 read-only
cells received on atm/fr/bridge physical interface
                                     viprSubChnlStatsOutCellCountHiB 1.3.6.1.4.1.1751.2.18.12.17.1.7 integer32 read-only
cell transmitted out of a physical atm/fr/bridge interface
                                     viprSubChnlStatsOutCellCountLoB 1.3.6.1.4.1.1751.2.18.12.17.1.8 integer32 read-only
cell transmitted out of a physical atm/fr/bridge interface
                                     viprSubChnlStatsTimer 1.3.6.1.4.1.1751.2.18.12.17.1.9 integer32 read-only
Number of seconds stats have been collecting
                                     viprSubChnlStatsInOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.17.1.10 integer32 read-only
odometer cells received on rt interface from another conn
                                     viprSubChnlStatsInOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.17.1.11 integer32 read-only
odometer cells received on rt interface from another conn
                                     viprSubChnlStatsOutOdometerCellCountHiA 1.3.6.1.4.1.1751.2.18.12.17.1.12 integer32 read-only
odometer cells sent out of a rt interface to another dest
                                     viprSubChnlStatsOutOdometerCellCountLoA 1.3.6.1.4.1.1751.2.18.12.17.1.13 integer32 read-only
odometer cells sent out of a rt interface to another dest
                                     viprSubChnlStatsInOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.17.1.14 integer32 read-only
odometer cells received on atm/fr/bridge physical interface
                                     viprSubChnlStatsInOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.17.1.15 integer32 read-only
odometer cells received on atm/fr/bridge physical interface
                                     viprSubChnlStatsOutOdometerCellCountHiB 1.3.6.1.4.1.1751.2.18.12.17.1.16 integer32 read-only
odometer cells transmitted out of a physical atm/fr/bridge interface
                                     viprSubChnlStatsOutOdometerCellCountLoB 1.3.6.1.4.1.1751.2.18.12.17.1.17 integer32 read-only
odometer cells transmitted out of a physical atm/fr/bridge interface
                                     viprSubChnlStatsOdometerTimer 1.3.6.1.4.1.1751.2.18.12.17.1.18 integer32 read-only
Odometer Number of seconds stats have been collecting
                                     viprSubChnlStatsOdometerReset 1.3.6.1.4.1.1751.2.18.12.17.1.19 integer read-write
to reset the subchannel statistics Enumeration: 'reset': 1.
                                     viprSubChnlStatsCellsDroppedB 1.3.6.1.4.1.1751.2.18.12.17.1.20 integer32 read-only
Cells Dropped on the Incoming side of B
                                     viprSubChnlStatsCellsTaggedB 1.3.6.1.4.1.1751.2.18.12.17.1.21 integer32 read-only
Cells Tagged on the Incoming side of B
                     ipAtmGroup 1.3.6.1.4.1.1751.2.18.13
                           ipAtmArpSrvConnType 1.3.6.1.4.1.1751.2.18.13.1 integer read-write
type of Arp Server connection Enumeration: 'pvc': 1, 'svc': 2, 'none': 3.
                           ipAtmIpAddr 1.3.6.1.4.1.1751.2.18.13.2 ipaddress read-write
Local IP Address
                           ipAtmIpMask 1.3.6.1.4.1.1751.2.18.13.3 ipaddress read-write
Local IP Mask
                           atmArpTable 1.3.6.1.4.1.1751.2.18.13.4 no-access
ARP Table
                               atmArpEntry 1.3.6.1.4.1.1751.2.18.13.4.1 no-access
ARP Table entry
                                   atmArpIpAddress 1.3.6.1.4.1.1751.2.18.13.4.1.1 ipaddress no-access
IP address of the IP host described in APR table entry.
                                   atmArpAtmAddress 1.3.6.1.4.1.1751.2.18.13.4.1.2 octet string read-write
ATM address of the IP host.
                                   atmArpAddrType 1.3.6.1.4.1.1751.2.18.13.4.1.3 integer read-write
Type of ATM address value of atmArp address. Enumeration: 'nsap': 1, 'e164': 2, 'e164nsap': 3.
                                   atmArpEntryState 1.3.6.1.4.1.1751.2.18.13.4.1.4 integer read-only
State of this entry. Enumeration: 'pendingConnect': 7, 'invalid': 2, 'permanent': 4, 'valid': 1, 'pendingIpAddr': 6, 'unconnected': 3, 'pendingAtmAddr': 5.
                                   atmArpEntryRowStatus 1.3.6.1.4.1.1751.2.18.13.4.1.5 rowstatus read-write
RowStatus of this entry.
                           appIpRouteTable 1.3.6.1.4.1.1751.2.18.13.5 no-access
Application IP Routing table.
                               appIpRouteEntry 1.3.6.1.4.1.1751.2.18.13.5.1 no-access
A route to a particular destination.
                                   appIpRouteDest 1.3.6.1.4.1.1751.2.18.13.5.1.1 ipaddress no-access
The destination IP address of this route. An entry with a value of 0.0.0.0 is not valid route.
                                   appIpRouteMask 1.3.6.1.4.1.1751.2.18.13.5.1.2 ipaddress no-access
Mask for Ip route, usefull only for SENS stack VxWorks
                                   appIpRouteMetric1 1.3.6.1.4.1.1751.2.18.13.5.1.3 integer no-access
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the routes appIpRouteProto value. If this metric is not used, its value should be set to 1.
                                   appIpRouteNextHop 1.3.6.1.4.1.1751.2.18.13.5.1.4 ipaddress read-write
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
                                   appIpRouteState 1.3.6.1.4.1.1751.2.18.13.5.1.5 integer read-only
Current state of route Enumeration: 'notinuse': 2, 'error': 3, 'invalid': 0, 'inuse': 1.
                     iispRouting 1.3.6.1.4.1.1751.2.18.14
                           iispCbrRoutTable 1.3.6.1.4.1.1751.2.18.14.1 no-access
IISP CBR Routing Table
                               iispCbrRoutEntry 1.3.6.1.4.1.1751.2.18.14.1.1 no-access
IISP CBR Table Entry
                                   iispCbrRoutLength 1.3.6.1.4.1.1751.2.18.14.1.1.1 integer32 no-access
length in bits
                                   iispCbrRoutNsapAddr 1.3.6.1.4.1.1751.2.18.14.1.1.2 octet string no-access
nsap address
                                   iispCbrRoutIfIndex 1.3.6.1.4.1.1751.2.18.14.1.1.3 intfindex read-write
Interface index - SSPPCCC
                                   iispCbrRoutRowStatus 1.3.6.1.4.1.1751.2.18.14.1.1.4 rowstatus read-write
row status
                           iispVbrRoutTable 1.3.6.1.4.1.1751.2.18.14.2 no-access
IISP CBR Routing Table
                               iispVbrRoutEntry 1.3.6.1.4.1.1751.2.18.14.2.1 no-access
IISP CBR Table Entry
                                   iispVbrRoutLength 1.3.6.1.4.1.1751.2.18.14.2.1.1 integer32 no-access
length in bits
                                   iispVbrRoutNsapAddr 1.3.6.1.4.1.1751.2.18.14.2.1.2 octet string no-access
nsap address
                                   iispVbrRoutIfIndex 1.3.6.1.4.1.1751.2.18.14.2.1.3 intfindex read-write
Interface index - SSPPCCC
                                   iispVbrRoutRowStatus 1.3.6.1.4.1.1751.2.18.14.2.1.4 rowstatus read-write
row status
                           iispCbrRouteTable 1.3.6.1.4.1.1751.2.18.14.3 no-access
IISP CBR Routing Table
                               iispCbrRouteEntry 1.3.6.1.4.1.1751.2.18.14.3.1 no-access
IISP CBR Route Entry
                                   iispCbrRouteLength 1.3.6.1.4.1.1751.2.18.14.3.1.1 integer32 no-access
length in bits
                                   iispCbrRouteNsapAddr 1.3.6.1.4.1.1751.2.18.14.3.1.2 octet string no-access
nsap address
                                   iispCbrRouteIfIndex 1.3.6.1.4.1.1751.2.18.14.3.1.3 intfindex no-access
Interface index - SSPPCCC
                                   iispCbrRouteRowStatus 1.3.6.1.4.1.1751.2.18.14.3.1.4 rowstatus read-write
row status
                                   iispCbrRouteIfVuniId 1.3.6.1.4.1.1751.2.18.14.3.1.5 integer no-access
Virtual UNI interface VUNI Id
                                   iispCbrRouteType 1.3.6.1.4.1.1751.2.18.14.3.1.6 integer read-write
Type of Route, Categorisation of an Endpoint Route or an intermediate Route Enumeration: 'drmRouteTypeEndPtIp': 136, 'drmRouteTypeEndPtCe': 133, 'drmRouteTypeFr': 41, 'drmRouteTypeCasTrunk': 51, 'drmRouteTypeAtm': 1, 'drmRouteTypeEndPtFr': 137, 'drmRouteTypeCe': 21, 'drmRouteTypeIlmiUser': 3, 'drmRouteTypeEndPtAtm': 132, 'drmRouteTypeSs7': 31, 'drmRouteTypeIisp': 2, 'drmRouteTypeEndPtTe': 134, 'drmRouteTypeIsdn': 11, 'drmRouteTypeEndPtIsdn': 135, 'drmRouteTypeAny': 0.
                                   iispCbrRouteDest 1.3.6.1.4.1.1751.2.18.14.3.1.7 integer read-write
Type of Destination, Categorisation of an Endpoint destination or an intermediate destination Enumeration: 'drmRouteTypeEndPtIp': 19, 'drmRouteDestFr': 5, 'drmRouteTypeEndPtFr': 20, 'drmRouteDestEndPtAtm': 15, 'drmRouteDestSs7': 4, 'drmRouteDestEndPtTe': 17, 'drmRouteDestAalIwf': 6, 'drmRouteDestAtm': 1, 'drmRouteDestIsdn': 2, 'drmRouteDestEndPtIsdn': 18, 'drmRouteDestAny': 0, 'drmRouteTypeEndPtCas': 21, 'drmRouteDestCe': 3, 'drmRouteDestEndPtCe': 16.
                           iispVbrRouteTable 1.3.6.1.4.1.1751.2.18.14.4 no-access
IISP CBR Routing Table
                               iispVbrRouteEntry 1.3.6.1.4.1.1751.2.18.14.4.1 no-access
IISP CBR Table Entry
                                   iispVbrRouteLength 1.3.6.1.4.1.1751.2.18.14.4.1.1 integer32 no-access
length in bits
                                   iispVbrRouteNsapAddr 1.3.6.1.4.1.1751.2.18.14.4.1.2 octet string no-access
nsap address
                                   iispVbrRouteIfIndex 1.3.6.1.4.1.1751.2.18.14.4.1.3 intfindex no-access
In most cases, it is the I/O Interface index - SSPPCCC. However, in case of ATM Trunking's Narrowband routing and Broadband routing, this is either the CAS trunk group ID, or the remote IWF ID, which are 1 to 3 digits decimal numbers
                                   iispVbrRouteRowStatus 1.3.6.1.4.1.1751.2.18.14.4.1.4 rowstatus read-write
row status
                                   iispVbrRouteIfVuniId 1.3.6.1.4.1.1751.2.18.14.4.1.5 integer no-access
Virtual UNI interface VUNI Id
                                   iispVbrRouteType 1.3.6.1.4.1.1751.2.18.14.4.1.6 integer read-write
Type of Route, Categorisation of an Endpoint Route or an intermediate Route Enumeration: 'drmRouteTypeEndPtIp': 136, 'drmRouteTypeEndPtCe': 133, 'drmRouteTypeFr': 41, 'drmRouteTypeCasTrunk': 51, 'drmRouteTypeIwfTrunk': 61, 'drmRouteTypeAtm': 1, 'drmRouteTypeEndPtFr': 137, 'drmRouteTypeCe': 21, 'drmRouteTypeIlmiUser': 3, 'drmRouteTypeEndPtAtm': 132, 'drmRouteTypeSs7': 31, 'drmRouteTypeIisp': 2, 'drmRouteTypeEndPtTe': 134, 'drmRouteTypeIsdn': 11, 'drmRouteTypeEndPtIsdn': 135, 'drmRouteTypeAny': 0.
                                   iispVbrRouteDest 1.3.6.1.4.1.1751.2.18.14.4.1.7 integer read-write
Type of Destination, Categorisation of an Endpoint destination or an intermediate destination Enumeration: 'drmRouteTypeEndPtIp': 19, 'drmRouteDestFr': 5, 'drmRouteTypeEndPtFr': 20, 'drmRouteDestEndPtAtm': 15, 'drmRouteDestSs7': 4, 'drmRouteDestEndPtTe': 17, 'drmRouteDestAalIwf': 6, 'drmRouteDestAtm': 1, 'drmRouteDestIsdn': 2, 'drmRouteDestEndPtIsdn': 18, 'drmRouteDestAny': 0, 'drmRouteTypeEndPtCas': 21, 'drmRouteDestCe': 3, 'drmRouteDestEndPtCe': 16, 'drmRouteTypeEndPtTrkIwf': 22, 'drmRouteDestEndPtAny': 14.
                     returnCode 1.3.6.1.4.1.1751.2.18.15
                           pvcFailureReasonCode 1.3.6.1.4.1.1751.2.18.15.1 integer read-only
An identified reason why an ATM PVC connection request failed. aal2CuTimerOutOfRange(298): this error code is generated when the aal2CuTimer value is out of range and the valid reanges is 0 to 8 (0 - 40 msec of delay). unrecognizableDigitCollectTypeA2B(299): unrecognizable digital tone set in connection A2B direction. unrecognizableDigitCollectTypeB2A(300): unrecognizable digital tone set in connection B2A direction. Enumeration: 'dspResourceUnavailable': 214, 'vuni-Already-Exists-B': 269, 'interfaceB-InHdlcReservedList': 144, 'vuni-Already-Exists-A': 263, 'slotA-OutOfRange': 99, 'vi-0-Non-Ubr-Conn-Not-SuppA2B': 237, 'vpGreaterThanVpMaxIgrsB2A': 30, 'vpiVciWithinSvcRangeIgrsB2A': 91, 'vpGreaterThanVpMaxIispEgrsB2A': 35, 'interfaceB-InCircuitEmulationReleasedList': 149, 'cantUseManagementChnlEgrsB2A': 15, 'dlciFoundInReleasedList': 97, 'dhpvcSwitchOver-BkupToNone': 288, 'cnfrmTypeNotValidB2A': 251, 'beNotValidB2A': 195, 'ipDestAddrSubnetBInPvcList': 165, 'unrecognizableCodingTranslationA2B': 207, 'vuni-Does-Not-Match-vi': 259, 'bcOrCirNotValidB2A': 197, 'interfaceA-NotAtm': 113, 'vi-0-Non-Ubr-Conn-Not-SuppB2A': 238, 'vuni-Not-Enabled-A': 261, 'unrecognizableSilenceDetectionModeA2B': 203, 'vpLessThanVpMinEgrsA2B': 25, 'unrecognizableSilenceDetectionMode': 121, 'internalSrvcTypeUnavailableA2B': 40, 'vciIsNotNullInVpcIgrsB2A': 61, 'ipDestAddrSubnetBInReleasedList': 166, 'vpiWithinSvcRangeEgrsA2B': 50, 'connectionsUnavailableInModuleA2B': 79, 'vpiInReservedListA2B': 53, 'interfaceA-InCircuitEmulationReservedList': 136, 'interfaceB-InCircuitEmulationReservedList': 150, 'vbrBandwidthUnavailableIgrsA2B': 85, 'cnfrmTypeNotValidA2B': 250, 'vciIsNotNullInVpcEgrsA2B': 60, 'intf-VBR-CellRate-Exceeded': 231, 'vi-OS-Cannot-Be-0': 226, 'interfaceB-InTerminalEmulationReleasedList': 146, 'vpiWithinSvcRangeIgrsB2A': 51, 'callDataStructuresUnavailable': 45, 'pcrLessThanOrEqualToMcrB2A': 304, 'cnfrmType-ServiceType-Mismatch-A2B': 252, 'unrecognizableCallingToneDetectionB2A': 211, 'vi-OOR-A': 235, 'vpiVciInReleasedListA2B': 73, 'interfaceA-InHdlcReservedList': 130, 'notNullVpcInNoisyLinkB2AEgrs': 152, 'vpGreaterThanVpMaxIispIgrsB2A': 34, 'unrecognizableServiceTypeA2B': 115, 'vi-Not-Enabled-A': 247, 'unrecognizableBindTypeEgrsA2B': 42, 'ipDestAddrSubnetBInReservedList': 164, 'vcGreaterThanVcMaxIgrsA2B': 20, 'vi-Not-Enabled-B': 248, 'vuni-Does-Not-Exist': 258, 'vi-Should-Be-0': 234, 'vuni-Should-Be-0-A': 260, 'vpLessThanVpMinIgrsB2A': 26, 'bcBeOrCirValTooHiA2B': 190, 'vpiWithinSvcRangeEgrsB2A': 52, 'interfaceA-InTerminalEmulationReleasedList': 132, 'qosUnavailableB2A': 6, 'bandwidthUnavailableB2A': 4, 'vuni-Should-Be-0-B': 266, 'cantUseManagementChnlIgrsB2A': 14, 'stdAal2TrunkBWUavailableIgrs': 280, 'vpiVciWithinSvcRangeEgrsB2A': 92, 'iWF-NotSupportedModuleA': 198, 'channelA-NotBound': 104, 'channelB-NotBound': 111, 'ipDestAddrSubnetAInPvcList': 162, 'vi-0-Non-Ubr-Conn-Not-Supp': 225, 'vi-Cbr-Bw-Unavailable-Egrs-B': 243, 'unsupportedConnectionB2A': 78, 'pcrGreaterThanLinkSpeedIngrA2B': 294, 'unrecognizableVoiceCompressionModeA2B': 205, 'interfaceA-InTerminalEmulationPvcList': 131, 'invalidVccInNoisyLinkB2AIgrs': 153, 'vcLessThanVcMinIgrsB2A': 18, 'vpiInPvcListB2A': 56, 'vuni-OOR-B': 268, 'vuni-Vpi-OOR-B': 274, 'unsupportedConnectionA2B': 77, 'unrecognizableVoiceCompressionModeB2A': 210, 'pcrGreaterThanLinkSpeedEgrA2B': 296, 'interfaceAInBridgeReservedList': 179, 'unrecognizableEchoCancellationMode': 122, 'bcBeCirCannotBeNullB2A': 189, 'unsupportedFrwdErrCorrectSettings': 157, 'vpiInReleasedListA2B': 57, 'illegalMulticaseIdA2B': 75, 'rsvdChnlRangeEgrsB2A': 39, 'pcrLessThanOrEqualToMcrA2B': 303, 'unrecognizableVoiceCompressionMode': 123, 'cantUseManagementChnlEgrsA2B': 13, 'vi-Cbr-Bw-Unavailable-Egrs': 241, 'moduleAMultiPortMcstNotSupported': 186, 'vpiVciInReservedListA2B': 65, 'cantUseSignalingChnlEgrsB2A': 11, 'vi-Conn-CellRate-Exceeded': 232, 'vuni-Does-Not-Exist-A': 264, 'vpiVciWithinSvcRangeIgrsA2B': 89, 'vcLessThanVcMinIgrsA2B': 16, 'notCpuIpInterfaceA': 167, 'interfaceBInBridgeReservedList': 180, 'vpiVciUnavailableA2B': 1, 'ipDestAddrSubnetAInReleasedList': 163, 'vpGreaterThanVpMaxEgrsA2B': 29, 'vuni-Not-Enabled-B': 267, 'internalSrvcTypeUnavailableB2A': 41, 'vpGreaterThanVpMaxIgrsA2B': 28, 'interfaceA-InTerminalEmulationReservedList': 133, 'interfaceB-InTerminalEmulationPvcList': 145, 'stdAal2TrunkResourceUnavailable': 275, 'physicalPortA-Uninitialized': 103, 'interfaceB-InCircuitEmulationPvcList': 148, 'nullTrafficParametersRejectedB2A': 48, 'vpiInPvcListA2B': 55, 'queueTypeSarTypeMismatchA2B': 301, 'vi-Resource-Unavail': 222, 'interfaceBInBridgePvcList': 176, 'vuni-Does-Not-Match-vi-B': 271, 'interfaceB-NotAtm': 114, 'unrecognizableEchoCancellationModeB2A': 209, 'portB-OutOfRange': 107, 'vbrBandwidthUnavailableEgrsB2A': 88, 'vpiVciInPvcListB2A': 70, 'notNullVpcInNoisyLinkA2BIgrs': 137, 'vi-CellRate-Too-Lo': 228, 'dhpvcSwitchOver-NoneToPrim': 286, 'vi-OS-OOR': 227, 'unrecognizableServiceType': 183, 'cantUseSignalingChnlEgrsA2B': 9, 'cbrBandwidthUnavailableIgrsA2B': 81, 'beNotValidA2B': 194, 'vpiVciInReservedListB2A': 66, 'vpiVciInPvcListA2B': 69, 'vcGreaterThanVcMaxEgrsB2A': 23, 'dlciFoundInPvcList': 96, 'interfaceAInBridgeReleasedList': 177, 'dhpvcState-Prim-Pass-NoFail-Bkup-Act-NoFail': 291, 'physicalPortB-Uninitialized': 110, 'vpGreaterThanVpMaxEgrsB2A': 31, 'channelB-OutOfRange': 108, 'invalidVccInNoisyLinkA2BIgrs': 139, 'cbrBandwidthUnavailableEgrsA2B': 82, 'interfaceA-InCircuitEmulationPvcList': 134, 'vpiVciInReleasedListB2A': 74, 'invalidBridgePortA2B': 173, 'vcLessThanVcMinEgrsB2A': 19, 'bcBeOrCirValTooHiB2A': 191, 'vpiInReservedListB2A': 54, 'invalidBridgePortB2A': 174, 'portA-OutOfRange': 100, 'vuni-Does-Not-Match-vi-A': 265, 'vpiInVpcReservedListB2A': 64, 'dhpvcState-Prim-Pass-Fail-Bkup-Act-NoFail': 290, 'vpiInReleasedListB2A': 58, 'stdAal2CIDAlreadyInUse': 278, 'rsvdChnlRangeEgrsA2B': 37, 'pcrGreaterThanLinkSpeedIngrB2A': 295, 'vuni-Should-Be-0': 254, 'nullTrafficParametersRejectedA2B': 47, 'vi-Mod-Limit-Exceeded': 221, 'dhpvcSwitchOver-BkupToPrim': 289, 'unrecognizableCodingTranslationB2A': 212, 'pcrGreaterThanLinkSpeedEgrB2A': 297, 'vpGreaterThanVpMaxIispIgrsA2B': 32, 'stdAal2TrunkNotSetup': 282, 'channelA-OutOfRange': 101, 'vi-Should-Be-0-A': 239, 'internalResourceUnavailable': 7, 'moduleBMultiPortMcstNotSupported': 187, 'vuni-Already-Exists': 257, 'unrecognizableBindTypeEgrsB2A': 43, 'vuni-OOR': 256, 'aal2CuTimerOutOfRange': 298, 'stdAal2Dsp2ResourceUnavailable': 276, 'cnfrmType-ServiceType-Mismatch-B2A': 253, 'vpiInVpcReleasedListA2B': 71, 'vuni-Vpi-OOR': 272, 'ipResourceUnavailable': 168, 'invalidVccInNoisyLinkA2BEgrs': 140, 'unsupportedFlowSettings': 158, 'aal2CIDOutOfRange': 283, 'dspUnsupportedForMultiCastConns': 213, 'fecResourceUnavailable': 170, 'semaphoreTimeout': 94, 'interfaceB-NotFrameRelay': 127, 'vuni-OOR-A': 262, 'vcGreaterThanVcMaxEgrsA2B': 21, 'notBridgeInterfaceA': 171, 'notBridgeInterfaceB': 172, 'unrecognizableCallingToneDetectionA2B': 206, 'unsupportedConnection': 160, 'queueTypeSarTypeMismatchB2A': 302, 'bcNotValidB2A': 193, 'unrecognizableSarTypeB2A': 118, 'vpiInVpcReservedListA2B': 63, 'interfaceBInBridgeReleasedList': 178, 'vi-Vbr-Bw-Unavailable-Egrs-A': 245, 'interfaceAInBridgePvcList': 175, 'interfaceB-InHdlcReleasedList': 143, 'cantUseManagementChnlIgrsA2B': 12, 'vpLessThanVpMinEgrsB2A': 27, 'vpiWithinSvcRangeIgrsA2B': 49, 'frwdErrCorrectResourceInternalError': 159, 'interfaceB-InHdlcPvcList': 142, 'invalidSARType': 202, 'cantUseSignalingChnlIgrsB2A': 10, 'multicastDataStructuresUnavailable': 93, 'moduleAMcstNotSupported': 184, 'vciIsNotNullInVpcEgrsB2A': 62, 'vuni-Vpi-OOR-A': 273, 'echoCancellationOnlySupportedForDuplex': 217, 'destOrSrcCannotBeDSPCard': 215, 'vpiInVpcPvcListB2A': 68, 'cbrBandwidthUnavailableIgrsB2A': 83, 'vi-OOR': 220, 'dlciFoundInReservedList': 95, 'dhpvcSwitchOver-NoneToBkup': 287, 'interfaceA-NotCircuitEmulation': 119, 'interfaceInUse': 156, 'notNullVpcInNoisyLinkA2BEgrs': 138, 'vpGreaterThanVpMaxIispEgrsA2B': 33, 'interfaceB-NotCircuitEmulation': 120, 'vi-Does-Not-Exist': 224, 'unrecognizableEchoCancellationModeA2B': 204, 'fecAutoInSimplexNotValid': 169, 'rsvdChnlRangeIgrsB2A': 38, 'ipDestAddrSubnetAInReservedList': 161, 'intf-CBR-CellRate-Exceeded': 230, 'interfaceB-NotVbr': 125, 'invalidDlci': 98, 'notNullVpcInNoisyLinkB2AIgrs': 151, 'moduleA-Uninitialized': 102, 'stdAal2CIDInRsvRange': 281, 'unsupportedFrwdErrCorrectValueA2B': 141, 'vpLessThanVpMinIgrsA2B': 24, 'internalDSPResourceError': 216, 'interfaceA-InHdlcPvcList': 128, 'invalidDlciB': 182, 'cbrBandwidthUnavailableEgrsB2A': 84, 'unrecognizableServiceTypeB2A': 116, 'vi-Should-Be-0-B': 240, 'bcBeCirCannotBeNullA2B': 188, 'invalidDlciA': 181, 'vciIsNotNullInVpcIgrsA2B': 59, 'vpiInVpcPvcListA2B': 67, 'slotStdAal2ResourceUavailable': 277, 'interfaceA-InCircuitEmulationReleasedList': 135, 'vbrBandwidthUnavailableIgrsB2A': 87, 'qosUnavailableA2B': 5, 'invalidVccInNoisyLinkB2AEgrs': 154, 'slotB-OutOfRange': 106, 'vcLessThanVcMinEgrsA2B': 17, 'vi-Vbr-Bw-Unavailable-Egrs': 244, 'vi-Cbr-Bw-Unavailable-Egrs-A': 242, 'vpiVciWithinSvcRangeEgrsA2B': 90, 'stdAal2TrunkBWUavailableEgrs': 279, 'interfaceA-InHdlcReleasedList': 129, 'invalidMaxFrSizeB2A': 201, 'interfaceB-InTerminalEmulationReservedList': 147, 'interfaceA-NotFrameRelay': 126, 'pcrLessThanScr': 249, 'callWithoutConnections': 44, 'moduleBMcstNotSupported': 185, 'vcGreaterThanVcMaxIgrsB2A': 22, 'unrecognizableDigitCollectTypeA2B': 299, 'rsvdChnlRangeIgrsA2B': 36, 'unrecognizableSarTypeA2B': 117, 'vbrBandwidthUnavailableEgrsA2B': 86, 'vpiVciUnavailableB2A': 2, 'interfaceA-NotVbr': 124, 'connectionsUnavailableInModuleB2A': 80, 'unrecognizableSilenceDetectionModeB2A': 208, 'vuni-Does-Not-Exist-B': 270, 'invalidMaxFrSizeA2B': 200, 'moduleB-UnrecognizablePortType': 112, 'unrecognizableDigitCollectTypeB2A': 300, 'vi-Vbr-Bw-Unavailable-Egrs-B': 246, 'iWF-NotSupportedModuleB': 199, 'bcOrCirNotValidA2B': 196, 'cantUseSignalingChnlIgrsA2B': 8, 'unsupportedFrwdErrCorrectValueB2A': 155, 'moduleB-Uninitialized': 109, 'cnctnDataStructuresUnavailable': 46, 'dhpvcState-Prim-Act-NoFail-Bkup-Pass-Fail': 292, 'vi-OOR-B': 236, 'vi-Already-Exists': 223, 'dhpvcSwitchOver-PrimToNone': 285, 'bcNotValidA2B': 192, 'vi-Not-Enabled': 233, 'vi-Cannot-Be-0': 219, 'dhpvcState-Prim-Act-NoFail-Bkup-Pass-NoFail': 293, 'dhpvcSwitchOver-PrimToBkup': 284, 'bandwidthUnavailableA2B': 3, 'vuni-Not-Enabled': 255, 'cirEmCirEm-ThruPutMismatch': 218, 'vi-CellRate-Too-Hi': 229, 'vpiInVpcReleasedListB2A': 72, 'illegalMulticaseIdB2A': 76, 'moduleA-UnrecognizablePortType': 105.
                           interfaceIndex 1.3.6.1.4.1.1751.2.18.15.2 intfindex read-only
Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                           interfaceType 1.3.6.1.4.1.1751.2.18.15.3 integer read-only
Interface type used for identification in traps. A specific interface is associated with each number. atmUni3-0(1) ATM User Network Interface version 3.0 atmUni3-1(2) ATM User Network Interface version 3.1 iispUser(3) Interim Inter Switch Protocol User Side iispNetwork(4) Interim Inter Switch Protocol Network Side circuitEmulation(5) ATM Circuit Emulation frameRelayUni(6) Frame Relay User Network Interface pri-isdn-user(7) Integrated Services Digital Network Primary Rate Interface User Interface pri-isdn-network(8) Integrated Services Digital Network Primary Rate Interface Network Interface terminalEmulation(9) Terminal Emulation dsp(10) DSP hdlcPassThrough(11) High Level Data Link Control Pass Through Interface bridge(12) Ethernet Bridge routing(13) Ethernet Routing dbCirEm(14) Dynamic Bandwidth Circuit Emulation frameRelayNni(15) Frame Relay Network Network Interface dsp2(16) DSP2 atmIma(17) ATM Inverse Multiplexing over ATM (IMA) atmPnni1-0(18) ATM Private Network Network Interface Version 1.0 atmUni4-0(19) ATM User Network Interface Version 4.0 atmVnnUni3-1(20) ATM Virtual Network Navigator User Network Interface Version 3.1 casTrunkLine(21) Channel Associated Signaling Trunk Line Interface toneAnnce(22) Tone Announcement Interface gr303(23) GR303 Enumeration: 'bridge': 12, 'circuitEmulation': 5, 'terminalEmulation': 9, 'frameRelayNni': 15, 'atmPnni1-0': 18, 'hdlcPassThrough': 11, 'casTrunkLine': 21, 'atmUni3-1': 2, 'atmUni3-0': 1, 'toneAnnce': 22, 'dbCirEm': 14, 'frameRelayUni': 6, 'dsp': 10, 'atmIma': 17, 'gr303': 23, 'routing': 13, 'iispUser': 3, 'pri-isdn-user': 7, 'pri-isdn-network': 8, 'iispNetwork': 4, 'atmVnnUni3-1': 20, 'dsp2': 16, 'atmUni4-0': 19.
                           interfaceFailureReasonCode 1.3.6.1.4.1.1751.2.18.15.4 integer read-only
Identification of cause for failure in changing the status of an interface. interfaceInService(1) Most, if not all, modifications require that the interface be out of service. interfaceNotNew(2) Some modifications require that the interface must never have been in service. interfaceExists(3) Some modifications, such as setting the interface type, require that no interface exists. (type must be unconfigured). bridgeGroupActive(4) For setting the bridgeDomainNumber in bridge or router interfaces. to add an interface to a bridgeGroup, the bridgeGroup must be in service. signalingNotEnabled(5) For this interface to be created, signaling must be enabled. firmwareOutOfDate(6) The firmware for the i/o card does not work with this interface. t1SigEnableInterfaceNotSupported(7) The interface is not supported if T1 signaling is enabled ts16ForData(8) ts16 has been set for passing data and the user attempts to turn on signaling. dbcesConfigured(9) Signaling cannot be disabled because this interface is configured as dbces. signalingEnabled(10) Signaling is on for at least one of the channels while trying to change e1 TS16 from CAS to CCS. cmCardTypeNotSupported(11) CM_NET interface is only supported by DS3 DS1 OC3 and SUPER_DS1 cards cmMultipleIntfNotSupported(12) only one interface can be configured as CM_NET cmIntfInService(13) CM_NET interface is in-service cmInterfaceConfigured(14) CM_NET interface is configured channelizationEnabled(15) A port can not be channelized in order to support unstructured CE. unstructuredCEConfigured(16) A port which has been channelized can not be configured to support unstructured CE. firmwareOutOfDate-ts16CAS-unsupported(17) ts16CAS is not supported by the firmware firmwareOutOfDate-interfaceType-unsupported(18) interface type is not supported by the firmware firmwareOutOfDate-ts16-unsupported(19) ts16 is not supported by the firmware invalidPortMap(20) invalid port map otherInterfacesExistOnThisPort(21) ISDN interface needs all 24 channels on the port. If any of the channels on that interface are already configured, the ISDN interface can not be defined on that port. intfInIMAgroup(22) chanId bit in portMap is 1 errorCTC-portTxClkSrc-notLocal(23) if imaGrpChannelNeTxClkMode is set to ctc then all ports should have the transmitClockSource as localTiming different-LoopbackConfig-on-Ports(24) all physical ports included in the portMap must have the same loopback configuration imaGChanNeTxClkMode-unsupported(25) ima group channel near-end Tx clock mode is not supported intfChange-Disallowed-on-APS-ProtectionPort(26) an interface cannot be manipulated via protection port in an APS setup intferfaceCurrentlyNotSupported(27) the interface type is not support currently failure-at-call-handler(28) interface creation failure due to call handler unstructuredCE-payloadloop(29) Unstructured CE should not have payload loopback as a loop back option channelConfigModeNotConforming(30) There was a limitation on the channel mode of DSP_2D card: if there is a channel is already inService, all the channel mode of configured channels must be the same as that of the channel inService; all the channel mode of unconfigured channels can only be configured the same as that of the channel inService. usageOfReservedTimeSlot(31) for HD_E1, do not allow any configuration to be SET on channel number 1 or 17 (base 1) or chan 0 or 16 (base 0). virtualIntf-and-AtmSignaling-bothCannotBeEnabled(32) vitual interface and signalling cannot both be enabled at the same time virtualUni-and-AtmSignaling-bothCannotBeEnabled(33) vitual UNI and signalling cannot both be enabled at the same time virtualUni-notSupported(34) virtual UNI is not supported atmUni-UbrLoadBalSupp-cannotBeEnabled-whenSignalingDisabled(35) ubr load balancing cannot be enabled when signaling is disabled virtualInterface-notSupported(36) virtual interface support only allowed on APS type of cards card-doesNotSupport-UPC(37) only some cardTypes support UPC atmUni-SvcVpiVci-RangeCheck-Failure(38) Do range check provided atmSignaling is enabled vciMinSvc <= vciMaxSvc and vpiMinSvc <= vpiMaxSvc atmUni-SigVpiVci-Within-Svc-Range(39) atmUni{Vpi,Vci}Sig should not be within svc range atmUni-Ilmi-Svc-Sig-VpiVci-Clash(40) if IlmiProtocol status and atmUniSignaling are both enabled then the Ilmi Vpi/Vci should not fall in the Svc range and should not be equal to signaling vpi/vci virtualUNI-VpiNotAvailable(41) vpi is not available for the virtual UNI virtualUNI-InvalidVUNIId(42) vitural UNI Index is invalid intfNotSupported-with-ds1LineType-d4(43) if dsx1LineType is DSX1_D4 channel, interface type can't be atmIma intfNotSupported-with-ds1LineCoding-ami(44) if dsx1LineCoding is DSX1_AMI channel interface type can't be atmIma onlyCEsupported-with-msBitStuffing-enabled(45) if msBitStuffing is enabled only interface type circuit emulation is supported vISuppConnTrafficShapingMutuallyExclusive(46) The VI support flag and Traffic Shaping flag are mutually exclusive tS16onPortNotCAS(47) must have cas on port for channel to have cas trunk line interface channelizationDisabled(48) should have channelization enabled to have cas trunk line primaryDS1InterfaceNotConfigured(49) primary DS1 interface is not configured primaryTMCChanNotConfigured(50) primary timeslot management channel is not configured primaryTMCIntfAlreadyConfiguredInAnotherIg(51) primary timeslot management channel interface is already configured in another interface group primaryTMCIntfCantBeChanged(52) primary timeslot management channel interfance can't be changed primaryEOCChanNotConfigured(53) primary embeded operation channel is not configured primaryEOCIntfAlreadyConfiguredInAnotherIg(54) primary embeded operation channel interface is already configured in another interface group primaryTMC-EOCIntfShouldBeSame(55) primary timeslot management channel and embeded operation channel interfaces should be the same primaryEOCIntfCantBeChanged(56) primary embeded operation channel inteface can't be changed primaryTMC-BackupTMCIntfCantBeSame(57) primary and backup timeslot management channel interfaces can't be the same backupDS1InterfaceNotConfigured(58) backup DS1 interface is not configured backupTMCChanNotConfigured(59) backup timeslot management channel is not configured backupTMCIntfAlreadyConfiguredInAnotherIg(60) backup timeslot management channel interface is already configured in another interface group backupTMCIntfCantBeChanged(61) backup timeslot management channel interfance can't be changed primaryEOC-BackupEOCIntfCantBeSame(62) primary and backup embeded operation channel interfaces can't be the same backupEOCChanNotConfigured(63) backup embeded operation channel is not configured backupEOCIntfAlreadyConfiguredInAnotherIg(64) backup embeded operation channel interface is already configured in another interface group backupTMC-EOCIntfShouldBeSame(65) backup timeslot management channel and embeded operation channel interfaces should be the same backupEOCIntfCantBeChanged(66) backup embeded operation channel inteface can't be changed newBWBelowCurrentAllocated(67) new bandwidth is below the current allocated bandwidth newBWBelowCurrentAllocated-SvcsBeingDeleted(68) new bandwidth is below the current allocated bandwidth svc is being deleted newBWBelowCurrentAllocated-DeletePvcs(69) new bandwidth is below the current allocated bandwidth delete pvc newBWAboveCurrentAllocated(70) new bandwidth is above the current allocated bandwidth primaryInactive-or-SecondaryActive-In-IntfProtTable(71) an interface can't be deleted if it is in interface protection group which is primary/inactive or secondry/active onlyCEsupported-with-msLOSDetection-enabled(72) if msLOSDetection is enabled, only interface type circuit emulation is supported nonMuxNotAllowed-with-FaxRelay(73) DSP2 cards: if channelMode is CFG_DSP2_FAX_RELAY, aalMode can't be D_dsp2AalMode_aal2_non_multiplexed, invalid-DSPmode-and-AALmode-combination(74) DSP2 cards: such DSP mode and AAL mode combination is not allowed noBandwidth-For-SignalingConns(75) no bandwidth for signal connections Enumeration: 'invalidPortMap': 20, 'backupEOCChanNotConfigured': 63, 'onlyCEsupported-with-msBitStuffing-enabled': 45, 't1SigEnableInterfaceNotSupported': 7, 'signalingNotEnabled': 5, 'bridgeGroupActive': 4, 'interfaceExists': 3, 'otherInterfacesExistOnThisPort': 21, 'errorCTC-portTxClkSrc-notLocal': 23, 'ts16ForData': 8, 'firmwareOutOfDate': 6, 'channelizationDisabled': 48, 'firmwareOutOfDate-ts16CAS-unsupported': 17, 'nonMuxNotAllowed-with-FaxRelay': 73, 'primaryTMCChanNotConfigured': 50, 'unstructuredCE-payloadloop': 29, 'newBWBelowCurrentAllocated': 67, 'imaGChanNeTxClkMode-unsupported': 25, 'virtualUni-and-AtmSignaling-bothCannotBeEnabled': 33, 'newBWAboveCurrentAllocated': 70, 'card-doesNotSupport-UPC': 37, 'virtualUNI-InvalidVUNIId': 42, 'intfNotSupported-with-ds1LineType-d4': 43, 'backupTMCChanNotConfigured': 59, 'atmUni-Ilmi-Svc-Sig-VpiVci-Clash': 40, 'virtualUNI-VpiNotAvailable': 41, 'intferfaceCurrentlyNotSupported': 27, 'usageOfReservedTimeSlot': 31, 'firmwareOutOfDate-ts16-unsupported': 19, 'signalingEnabled': 10, 'channelConfigModeNotConforming': 30, 'primaryDS1InterfaceNotConfigured': 49, 'primaryTMCIntfCantBeChanged': 52, 'atmUni-SvcVpiVci-RangeCheck-Failure': 38, 'different-LoopbackConfig-on-Ports': 24, 'firmwareOutOfDate-interfaceType-unsupported': 18, 'intfChange-Disallowed-on-APS-ProtectionPort': 26, 'backupEOCIntfAlreadyConfiguredInAnotherIg': 64, 'atmUni-UbrLoadBalSupp-cannotBeEnabled-whenSignalingDisabled': 35, 'noBandwidth-For-SignalingConns': 75, 'vISuppConnTrafficShapingMutuallyExclusive': 46, 'virtualInterface-notSupported': 36, 'tS16onPortNotCAS': 47, 'backupEOCIntfCantBeChanged': 66, 'backupTMC-EOCIntfShouldBeSame': 65, 'virtualUni-notSupported': 34, 'primaryEOCChanNotConfigured': 53, 'dbcesConfigured': 9, 'onlyCEsupported-with-msLOSDetection-enabled': 72, 'intfInIMAgroup': 22, 'interfaceNotNew': 2, 'primaryEOCIntfAlreadyConfiguredInAnotherIg': 54, 'primaryInactive-or-SecondaryActive-In-IntfProtTable': 71, 'failure-at-call-handler': 28, 'virtualIntf-and-AtmSignaling-bothCannotBeEnabled': 32, 'atmUni-SigVpiVci-Within-Svc-Range': 39, 'newBWBelowCurrentAllocated-DeletePvcs': 69, 'backupTMCIntfAlreadyConfiguredInAnotherIg': 60, 'backupDS1InterfaceNotConfigured': 58, 'primaryEOC-BackupEOCIntfCantBeSame': 62, 'intfNotSupported-with-ds1LineCoding-ami': 44, 'backupTMCIntfCantBeChanged': 61, 'channelizationEnabled': 15, 'invalid-DSPmode-and-AALmode-combination': 74, 'primaryTMC-EOCIntfShouldBeSame': 55, 'interfaceInService': 1, 'primaryTMC-BackupTMCIntfCantBeSame': 57, 'unstructuredCEConfigured': 16, 'newBWBelowCurrentAllocated-SvcsBeingDeleted': 68, 'primaryEOCIntfCantBeChanged': 56, 'primaryTMCIntfAlreadyConfiguredInAnotherIg': 51.
                           powerSupplyReasonCode 1.3.6.1.4.1.1751.2.18.15.5 integer read-only
Identification for change in status of a power supply. overload(1) overload overloadCleared(2) overload cleared plus5vFailed(3) +5V power supply failed plus5vCleared(4) +5V power supply cleared plus120vFailed(5) +120V power supply failed plus120vCleared(6) +120V power supply cleared minus48vFailed(7) -48V power supply failed minus48vCleared(8) -48V power supply failed Enumeration: 'minus48vFailed': 7, 'plus120vCleared': 6, 'plus5vCleared': 4, 'minus48vCleared': 8, 'overload': 1, 'overloadCleared': 2, 'plus120vFailed': 5, 'plus5vFailed': 3.
                           portId 1.3.6.1.4.1.1751.2.18.15.6 integer32 read-only
Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and PP is the port number.
                           lineStatus 1.3.6.1.4.1.1751.2.18.15.7 integer32 read-only
Bit map of the status of a line connected to a port.
                           firmwareDownloadReasonCode 1.3.6.1.4.1.1751.2.18.15.8 integer read-only
The suspected reasons of why a firmware download would fail. Enumeration: 'completeReplyTimeout': 9, 'mapFileNameImproper': 13, 'driverInvalidHeaderChecksum': 6, 'cfgFileCorrupted': 14, 'requestReplyTimeout': 8, 'mapFileCorrupted': 10, 'ioUnsupported': 19, 'removeCardBeforeFinish': 18, 'cardInService': 1, 'driverInvalidRecordChecksum': 7, 'wrongCardType': 17, 'driverUnavailable': 5, 'mapFileUnavailable': 11, 'cfgFileUnavailable': 15, 'cfgFileInvalidChecksum': 16, 'mapFileInvalidChecksum': 12, 'wrongCardSubType': 4, 'otherFailure': 3, 'errorInFile': 2.
                           remoteRebootReasonCode 1.3.6.1.4.1.1751.2.18.15.9 integer read-only
The result of a remote reboot request. Enumeration: 'backupCpuReboot-Proceeding': 36, 'ioCard16Reboot-OK': 16, 'ioCard2Reboot-OK': 2, 'ioCard5Reboot-OK': 5, 'ioCard12Reboot-NoCardInSlot': 28, 'ioCard7Reboot-OK': 7, 'ioCard1Reboot-OK': 1, 'ioCard6Reboot-NoCardInSlot': 22, 'primaryCpuSwitchover-Fail-VersionControlInProgress': 44, 'primaryCpuSwitchover-NoBackup': 40, 'ioCard8Reboot-OK': 8, 'primaryCpuSwitchover-Fail-BkCPUBuildNotGood': 46, 'backupCpuReboot-NoBackup': 37, 'ioCard2Reboot-NoCardInSlot': 18, 'ioCard1Reboot-NoCardInSlot': 17, 'ioCard11Reboot-NoCardInSlot': 27, 'primaryCpuSwitchover-Proceeding': 39, 'chassisReboot-Fail-VersionControlInProgress': 41, 'ioCard6Reboot-OK': 6, 'ioCard15Reboot-NoCardInSlot': 31, 'ioCard10Reboot-NoCardInSlot': 26, 'ioCard5Reboot-NoCardInSlot': 21, 'ioCard11Reboot-OK': 11, 'ioCard14Reboot-OK': 14, 'ioCard12Reboot-OK': 12, 'ioCard16Reboot-NoCardInSlot': 32, 'allIOCardReboot-NoIOCards': 34, 'backupCpuReboot-Fail-VersionControlInProgress': 42, 'ioCard13Reboot-OK': 13, 'ioCard7Reboot-NoCardInSlot': 23, 'ioCard4Reboot-OK': 4, 'ioCard9Reboot-OK': 9, 'primaryCpuSwitchover-Fail-BkCPUDataBaseNotNew': 45, 'allIOCardReboot-OK': 33, 'ioCard4Reboot-NoCardInSlot': 20, 'ioCard8Reboot-NoCardInSlot': 24, 'ioCard3Reboot-OK': 3, 'ioCard10Reboot-OK': 10, 'ioCard15Reboot-OK': 15, 'primaryCpuReboot-Proceeding': 38, 'ioCard13Reboot-NoCardInSlot': 29, 'primaryCpuSwitchover-Fail-BkCPU-NotReady': 47, 'chassisReboot-Proceeding': 35, 'ioCard3Reboot-NoCardInSlot': 19, 'ioCard14Reboot-NoCardInSlot': 30, 'primaryCpuReboot-Fail-VersionControlInProgress': 43, 'ioCard9Reboot-NoCardInSlot': 25.
                           saveConfigurationReasonCode 1.3.6.1.4.1.1751.2.18.15.10 integer read-only
The result of a save configuration request. equipment-OK(1) - Save of equipment configuration completed. equipment-Fail-VersionControlInProgress(2) - Save of equipment configuration failed due to ongoing version control operation. equipment-Fail(3) - Save of equipment configuration failed. connections-OK(4) - Save of connection configuration completed. connections-Fail-VersionControlInProgress(5) - - Save of connection configuration failed due to ongoing version control operation. connections-Fail(6) - Save of connection configuration failed. routing-OK(7) - Save of routing configuration completed. routing-Fail-VersionControlInProgress(8) - - Save of routing configuration failed due to ongoing version control operation. routing-Fail(9) - Save of routing configuration failed. all-OK(10) - Saving of all configurations completed. all-Fail-VersionControlInProgress(11) - - Saving of all configurations failed due to ongoing version control operation. all-Fail(12) - Saving of all configurations failed. fileTransferFailed(13) - Saving of configurations to secondary CPU failed. fileTransferCompleted(14) - Saving of configurations to secondary CPU completed. unSupportedOption(15) - Unsupported save option received. fail-backupCpuInitializationInProgress(16) - - Save operation failed due to ongoing secondary cpu initialization. expect2ndCPURebootAfterSave(17) - - Notification to expect reboot of secondary CPU after a save operation. expect2ndCPUCardFailedOrRemoved(18) - Notification to expect trap indicating removal/failure of secondary CPU after a save operation. Enumeration: 'all-OK': 10, 'fileTransferCompleted': 14, 'expect2ndCPURebootAfterSave': 17, 'all-Fail': 12, 'fileTransferFailed': 13, 'equipment-OK': 1, 'all-Fail-VersionControlInProgress': 11, 'connections-Fail-VersionControlInProgress': 5, 'routing-Fail-VersionControlInProgress': 8, 'routing-Fail': 9, 'connections-OK': 4, 'expect2ndCPUCardFailedOrRemoved': 18, 'equipment-Fail-VersionControlInProgress': 2, 'equipment-Fail': 3, 'connections-Fail': 6, 'fail-backupCpuInitializationInProgress': 16, 'routing-OK': 7, 'unSupportedOption': 15.
                           versionConfigurationReasonCode 1.3.6.1.4.1.1751.2.18.15.11 integer read-only
Indicated status and results of version changing. upgrade-Start(1) upgrade starts upgrade-Completed(2) upgrade completed upgrade-Fail(3) upgrade failed downgrade-Start(4) downgrade starts downgrade-Completed(5) downgrade completed downgrade-Fail(6) downgrade failed upgrade-Fail-NoVersion(7) upgrade failed, no version upgrade-Fail-VersionControlInProgress(8) upgrade failed, version control is in progress downgrade-Fail-NoVersion(9) downgrade failed, no version downgrade-Fail-VersionControlInProgress(10) downgrade failed, version control is in progress upgrade-InProgress(11) upgrade is in progress downgrade-InProgress(12)downgrade is in progress upgrade-sanityCheck-InProgress(13) upgrade sanity check is in progress downgrade-sanityCheck-InProgress(14) downgrade sanity check is in progress upgrade-sanityCheck-Completed(15), upgrade sanity check is completed downgrade-sanityCheck-Completed(16), downgrade sanity check is completed upgrade-Fail-SanityCheckFail(17) upgrade failed due to sanity check failure downgrade-Fail-SanityCheckFail(18) downgrade failed due to sanity check failure upgrade-Fail-BkCPUFailedToRespond(19) upgrade failed since backup CPU failed to respond downgrade-Fail-BkCPUFailedToRespond(20) downgrade failed since backup CPU failed to respond upgrade-Fail-UserAbort(21) upgrade failed since user aborted downgrade-Fail-UserAbort(22) downgrade failed since user aborted synch-Start(23) synchronization starts synch-InProgress(24) synchronization is in progress synch-Completed(25) synchronization is completed synch-Fail(26) synchronization failed synch-Fail-NoBkCPU(27) synchronization failed since no backup CPU synch-Fail-SameVersion(28) synchronization failed due to the same version synch-Fail-FileCRCFailed(29) synchronization failed due to file CRC failure synch-Fail-VersionControlInProgress(30) synchronization failed since version control is in progress synch-Fail-UserAbort(31) synchronization failed since user aborted synch-Fail-SanityCheckFail(32) synchronization failed due to sanity check failure synch-Fail-BkCPUFailedToRespond(33) synchronization failed since backup CPU failed to respond synch-sanityCheck-InProgress(34) synchronization sanity check is in progress synch-sanityCheck-Completed(35) synchronization sanity check is completed failedToAbort(36) failed to abort Enumeration: 'upgrade-Fail-VersionControlInProgress': 8, 'upgrade-Fail-SanityCheckFail': 17, 'downgrade-Fail-NoVersion': 9, 'failedToAbort': 36, 'synch-Fail-VersionControlInProgress': 30, 'downgrade-Start': 4, 'synch-Start': 23, 'synch-Fail-UserAbort': 31, 'synch-InProgress': 24, 'synch-Fail-NoBkCPU': 27, 'synch-sanityCheck-Completed': 35, 'upgrade-sanityCheck-Completed': 15, 'upgrade-InProgress': 11, 'upgrade-sanityCheck-InProgress': 13, 'downgrade-Completed': 5, 'downgrade-Fail-SanityCheckFail': 18, 'downgrade-Fail-BkCPUFailedToRespond': 20, 'synch-Fail': 26, 'downgrade-Fail-VersionControlInProgress': 10, 'downgrade-Fail': 6, 'synch-Fail-FileCRCFailed': 29, 'upgrade-Completed': 2, 'synch-Fail-SanityCheckFail': 32, 'upgrade-Fail': 3, 'upgrade-Fail-NoVersion': 7, 'synch-Fail-BkCPUFailedToRespond': 33, 'upgrade-Fail-BkCPUFailedToRespond': 19, 'upgrade-Fail-UserAbort': 21, 'synch-Fail-SameVersion': 28, 'downgrade-sanityCheck-Completed': 16, 'upgrade-Start': 1, 'downgrade-InProgress': 12, 'synch-Completed': 25, 'downgrade-Fail-UserAbort': 22, 'downgrade-sanityCheck-InProgress': 14, 'synch-sanityCheck-InProgress': 34.
                           percentComplete 1.3.6.1.4.1.1751.2.18.15.12 integer32 read-only
Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed.
                           ipTypeReasonCode 1.3.6.1.4.1.1751.2.18.15.13 integer read-only
Indicator of which ip address had the problem. Enumeration: 'cpuAndIpMaskInvalid': 19, 'inBandPrimaryIpAddress': 9, 'switchAndIpMaskInvalid': 22, 'siteGatewayAddr': 3, 'unableToApplyGatewayIpAddr': 27, 'cpuIpMaskClashWithInbandSubnet': 23, 'unableToApplySwitchIpAddr': 30, 'inBandBackupIpMask': 12, 'switchAndCpuIpSubnetMismatch': 20, 'siteRemoteMgrAddr4': 7, 'siteGatewayAddrInvalid': 25, 'cpuIpAddrInvalid': 18, 'siteEtherIpAddr': 1, 'unableToSetCpuIpInEPROM': 28, 'siteGatewayInbandAddrClash': 26, 'siteEtherIpMask': 2, 'unableToApplyCpuIpAddr': 29, 'siteGatewayInbandAddrMatch': 14, 'siteIncorrectEthernetSubnet': 16, 'siteIncorrectInbandSubnet': 15, 'inBandPrimaryIpMask': 10, 'unableToRevertBackToCpuIpAddr': 31, 'switchIpMaskClashWithInbandSubnet': 24, 'siteIncorrectGatewaySubnet': 13, 'gatewayAndCpuIpSubnetMismatch': 32, 'cpuIpSameAsSwitchIpAddr': 17, 'switchIpAddrInvalid': 21, 'siteRemoteMgrAddr5': 8, 'inBandBackupIpAddress': 11, 'siteRemoteMgrAddr1': 4, 'siteRemoteMgrAddr2': 5, 'siteRemoteMgrAddr3': 6.
                           timingReasonCode 1.3.6.1.4.1.1751.2.18.15.14 integer read-only
Indicator of type of relationship violated. Enumeration: 'invalidForwardDelay-MaxAge': 1, 'invalidHelloTime-MaxAge': 2.
                           alarmCardReasonCode 1.3.6.1.4.1.1751.2.18.15.15 integer read-only
Configuration status of the alarm inputs and outputs. cutoff - alarm turned off. There are two ways to turn off the audible alarm, locally via the pushbutton switch on the alarm module, and remotely, via the remote alarm cutoff, one of the alarm card inputs. Enumeration: 'inputContactOpen': 2, 'outputDactivated': 4, 'audibleLocalAlarmEnable': 5, 'audibleLocalAlarmCutoff': 6, 'outputActivated': 3, 'audibleRemoteAlarmCutoff': 8, 'audibleRemoteAlarmEnable': 7, 'inputContactClosed': 1.
                           removeConfigFiles 1.3.6.1.4.1.1751.2.18.15.16 integer read-only
Used to indicate the status of a remove configuration files request. from-PrimaryCPU(1) configuration files are removed from primary CPU from-BackupCPU(2) configuration files are removed from backup CPU chassisReboot(3) chassis reboot being done after removing configuration files failed-VersionControlInProgress(4) configuration file removal failed due to ongoing version conflict Enumeration: 'failed-VersionControlInProgress': 4, 'chassisReboot': 3, 'from-BackupCPU': 2, 'from-PrimaryCPU': 1.
                           spvcConfigFailureCode 1.3.6.1.4.1.1751.2.18.15.17 integer read-only
An identified reason for failure while configuring/modifying SPVC parameters. noSpvcConfigured(1) : There endpoint has not been configured as SPVC, so SPVC parameters cannot be modified. spvcAlreadyConfigured(2) : SPVC is already configured so it cannot be configured again as SPVC endpoint. noInterfaceConfigured(3) : There is no interface configured on the particular SSPPCCC. interfaceNotConfiguredAsRequired(4) : While configuring an SPVC endpoint, the interface is not as desired (e.g.it is not CE, while trying to configure CES SPVC). notActiveSpvc(6) : If the endpoint is configured with flowType ptToMptA2B the connType has to be activeSvc. slotA-OutofRange(7) : A-side of SPVC connection has slot number out of range. portA-OutofRange(8): A-side of SPVC connection has port number out of range. channelA-OutofRange(9): A-side of SPVC connection has channel number out of range. vpiVciWithInSvcRange(10) : A-side side of SPVC connection has vpi/vci configured in the SVC range of the A-side ATM interface. retryIntervalExceedsTheLimit(11) : retryInterval exceeds 3600s. interfaceNotConfiguredAsCE(12) : SPVC endpoint is configured as something other than CE. interfaceNotConfiguredAsVbr(13) : SPVC endpoint is configured as something other than TE. interfaceNotConfiguredAsAtm(14) : SPVC endpoint is configured as something other than ATM. noAddressConfiguredOnTheInterface(15) : Local address not configured for the particular SPVC being configured. localAddressNotValid(16) : invalid NSAP address format vpiVciUnavailable(17) : SPVC already setup on particular vpi/vci. pvcAlreadySetupOnVpiVci(18) : vpi/vci being used by another pvc. pvcAlreadySetupOnInterface(19) : redundant, same as above. interfaceNotConfiguredAsFr(21) : SPVC endpoint is configured as something other than Fr dlciUnavailable(22) : dlci not available at Passive endpoint. pvcAlreadySetupOnDlci(23) : dlci being used by another pvc. frTrafficParamsUnsupp(24) : fr-atm traffic mapping failure. dsp2ParamsUnsupp(25) : dsp2 params not supported for the call. sarNotConfigReq(26) : sarType not configured as required. Enumeration: 'channelA-OutofRange': 9, 'spvcAlreadyConfigured': 2, 'interfaceNotConfiguredAsCE': 12, 'interfaceNotConfiguredAsFr': 21, 'interfaceNotConfiguredAsRequired': 4, 'notActiveSpvc': 6, 'pvcAlreadySetupOnVpiVci': 18, 'noInterfaceConfigured': 3, 'portA-OutofRange': 8, 'vpiVciUnavailable': 17, 'interfaceNotConfiguredAsAtm': 14, 'sarNotConfigReq': 26, 'frTrafficParamsUnsupp': 24, 'noSpvcConfigured': 1, 'dlciUnavailable': 22, 'vpiVciWithInSvcRange': 10, 'pvcAlreadySetupOnInterface': 19, 'interfaceNotConfiguredAsVbr': 13, 'localAddressNotValid': 16, 'retryIntervalExceedsTheLimit': 11, 'retryIntervalTooSmall': 20, 'vuniNotMatch': 27, 'noAddressConfiguredOnTheInterface': 15, 'dsp2ParamsUnsupp': 25, 'slotA-OutofRange': 7, 'pvcAlreadySetupOnDlci': 23.
                           imaGrpChannelStatus 1.3.6.1.4.1.1751.2.18.15.18 integer read-only
The return value for the imaGrpChannelFailNotify trap. startupFe(1) Far-end is in the state of start-up cfgAbort(2) this state is entered when the far-end tries to use unacceptable configuration parameters including invalid frame length and incompatable symmetry cfgAbortFe(3) Far-end reported unacceptable configuration parameters including invalid frame length and incompatable symmetry insuffLinks(4) Near-end reported less than the min number of Tx links are active or less than the min number of Rx links are active insuffLinksFe(5) Far-end reported less than the min number of Rx links are active or less than thenmin number of Tx links are active blockedNe(6) Near-end is administratively out-of-service blockedFe(7) Far-end is administratively out-of-service timingSynch(8) A possible configuration mismatch has occurred (CTC and CTC modes are not the same at both ends of the IMA virtual links. Enumeration: 'cfgAbortFe': 3, 'blockedFe': 7, 'cfgAbort': 2, 'timingSynch': 8, 'insuffLinksFe': 5, 'insuffLinks': 4, 'startupFe': 1, 'blockedNe': 6.
                           atmImaIntfStatus 1.3.6.1.4.1.1751.2.18.15.19 integer read-only
The return value for the atmImaIntfFailNotify trap. lif -- Persistence of LIF defect at near-end (Loss of IMA Frame) lods -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) txMisConnect -- The link is mis-connected (not connected to the same far-end as the other links in the group.) rfi -- Persistence of RDI-IMA defect at near-end (Remote Failure Indicator) fault -- Implementation specific fault at near-end txUnusableFe -- Tx link forced to unusable due to far-end behavior rxUnusableFe -- Rx link forced to unusable due to far-end behavior Enumeration: 'rxUnusableFe': 7, 'lif': 1, 'txMisConnect': 3, 'txUnusableFe': 6, 'fault': 5, 'lods': 2, 'rfi': 4.
                           deviceId 1.3.6.1.4.1.1751.2.18.15.20 integer32 read-only
device ID is used as the number of external devices. Each device can be an external input device or control output device.
                           oamTestFailureReasonCode 1.3.6.1.4.1.1751.2.18.15.21 integer read-only
An identified reason why an OAM Loopback Test request has failed. invalidSPCforOAM: There is no such slot/port/channel in this box. invalidIntfForOAM: There is no such interface that OAM enabled. invalidLocationLength: The length of the Loopback Lo cation ID id not valid. oamNotSupportedForThisConnection: This connection is not OAM enabled.so OAM loopback is invalid test. loopbackTestAlreadyRunning: OAM loopback is waiting for response,not expect for another test. loopbackTestNotRunning: Invalid Test Actio. oamLocalResourcesUnavailable: Memery Alloc Fail. Enumeration: 'loopbackTestAlreadyRunning': 5, 'oamLocalResourcesUnavailable': 7, 'oamNotSupportedForThisConnection': 4, 'invalidIntfForOAM': 2, 'invalidSPCforOAM': 1, 'invalidLocationLength': 3, 'loopbackTestNotRunning': 6.
                           pnniCode 1.3.6.1.4.1.1751.2.18.15.22 integer read-only
An identified reason for Miscellaneous Reasons in PNNI Configuration pnniInvEndSysPortId(1) : Invalid EndSystem PortId. pnniNodeAdmStatNotUp(2) : Admin Status of Node is not up. pnniProtLnkStatDown(3) : Pnni Lnk status is down. pnniProtLnkStatUpNotAdv(4) : Pnni Lnk status up but not advertised. pnniProtLinkStatUpAdv(5) : Pnni Lnk status up and advertised. pnniIntfAdmStatUp(6) : Pnni Intf Admin Status up. pnniNodeNotCfg(7) : Pnni Node not configured in the switch. pnniRtAddrAddedByIlmi(8) : Pnni Route added succesfully from ILMI. pnniRtAddrDelByIlmi(9) : Pnni Route deleted succesfully from ILMI. pnniLvlMismatchInNodeId(10) : Level mismatch in Node Id. pnniLvlMismatchInPGId(11) : Level mismatch in Peer Group Id. pnniATMAddrInvInNodeId(12) : ATM Address entered in Node Id invalid. pnniATMAddrInvInPGId(13) : ATM Address entered in Peer Group Id invalid. pnniIntfAdmStatNotDel(14) : Pnni Intf Admin Status Not deleted. pnniNodeAdmStatUp(15) : Pnni Node Admin Status up. pnniNodeRowStatNotActive(16) : Pnni Node Row Status not active - cannot modify pnniNewRtAddrAdded(17) : New route added into pnni route address table. pnniRtAddrMod(18) : Route modified in pnni Address table. pnniAdvtNodeIdNotMine(19) : Advertised NodeId does not belong to this psax. pnniFeatureNotSupported(20) : pnni feature unsupported. Enumeration: 'pnniLvlMismatchInNodeId': 10, 'pnniIntfAdmStatUp': 6, 'pnniIntfAdmStatNotDel': 14, 'pnniNodeNotCfg': 7, 'pnniNodeRowStatNotActive': 16, 'pnniProtLnkStatDown': 3, 'pnniProtLinkStatUpAdv': 5, 'pnniRtAddrMod': 18, 'pnniRtAddrAddedByIlmi': 8, 'pnniNewRtAddrAdded': 17, 'pnniATMAddrInvInPGId': 13, 'pnniLvlMismatchInPGId': 11, 'pnniAdvtNodeIdNotMine': 19, 'pnniNodeAdmStatNotUp': 2, 'pnniProtLnkStatUpNotAdv': 4, 'pnniNodeAdmStatUp': 15, 'pnniInvEndSysPortId': 1, 'pnniATMAddrInvInNodeId': 12, 'pnniRtAddrDelByIlmi': 9, 'pnniFeatureNotSupported': 20.
                           swtchNodeIndx 1.3.6.1.4.1.1751.2.18.15.23 integer32 read-only
Switch Node Index for PNNI.
                           oc3APSPairPortIndex 1.3.6.1.4.1.1751.2.18.15.24 integer32 no-access
APS Pair Port index - SSPP
                           oc3APSReasonCode 1.3.6.1.4.1.1751.2.18.15.25 integer read-only
Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line local - near-end remote - far-end working - working port protect - protecting port DoNotRevert - after switching from working line to protection line, don't revert to working line even it returns to work ManualSw - switch over by user command SD - signal degradation SF - signal failure Forced - force switch over LockOut - don't allow switch over to a line Enumeration: 'localworkingSD': 26, 'localworkingSF': 28, 'localworkingForced': 30, 'remoteworkingSD': 58, 'remoteprotectLockOut': 47, 'remoteworkingSF': 60, 'localprotectForced': 14, 'remoteworkingDoNotRevert': 49, 'localprotectDoNotRevert': 1, 'remoteprotectManualSw': 40, 'remoteprotectForced': 46, 'localworkingDoNotRevert': 17, 'localprotectLockOut': 15, 'localprotectManualSw': 8, 'localprotectSD': 10, 'remoteprotectSD': 42, 'remoteprotectSF': 44, 'noRequest': 48, 'localprotectSF': 12, 'localworkingManualSw': 24, 'remoteprotectDoNotRevert': 33, 'remoteworkingManualSw': 56, 'remoteworkingForced': 62.
                           oc3APSK1K2Rx 1.3.6.1.4.1.1751.2.18.15.26 octet string read-only
Rx K1/K2 followed by hex value of K1, K2
                           oc3APSK1K2Tx 1.3.6.1.4.1.1751.2.18.15.27 octet string read-only
Tx K1/K2 followed by hex value of K1, K2
                           oc3APSSelectorState 1.3.6.1.4.1.1751.2.18.15.28 integer read-only
Working port: active/standby Protection port: standby/active Enumeration: 'w-standby-p-active': 2, 'w-active-p-standby': 1.
                           oc3APSWorkingLineSignalStatus 1.3.6.1.4.1.1751.2.18.15.29 integer read-only
Line Status of the working port sent in a trap enumeration explanations are the same as those of oc3APSProtectionLineSignalStatus Enumeration: 'signalDegradation': 2, 'lostCellDelineation': 8, 'lof': 256, 'signalFailure': 4, 'ais-p': 64, 'noAlarm': 1, 'los': 512, 'lop': 128, 'moduleFailure': 1024, 'switchByteFailure': 16, 'ais-l': 32.
                           oc3APSProtectionLineSignalStatus 1.3.6.1.4.1.1751.2.18.15.30 integer read-only
Line Status of the protection port sent in a trap. noAlarm(1) no alarm signalDegradation(2) signal bit error rate is higher than the specified threshold signalFailure(4) signal bit error rate is much higher than the specified threshold lostCellDelineation(8) unable to identify cell boundary switchByteFailure(16) switch bytes(k1,k2) of SONET header have invalid code ais-l(32) line header of SONET frame gives alarm indication signal ais-p(64) path header of SONET frame gives alarm indication signal lop(128) 1)a valid STS or VT pointer can't be obtained by using the pointer interpretation rules and the pointer word doesn't contain all-ones; 2)a number of consecutive with the NDF set to 1001 but not indicating concatenation is received lof(256) loss of frame los(512) loss of signal moduleFailure(1024) module failure Enumeration: 'signalDegradation': 2, 'lostCellDelineation': 8, 'lof': 256, 'signalFailure': 4, 'ais-p': 64, 'noAlarm': 1, 'los': 512, 'lop': 128, 'moduleFailure': 1024, 'switchByteFailure': 16, 'ais-l': 32.
                           arpStatus 1.3.6.1.4.1.1751.2.18.15.31 integer read-only
Success: Arp Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again after 1 sec and we will return either Success or Noroutes. Enumeration: 'tryAgain': 3, 'noArpEntries': 2, 'success': 1.
                           routingStatus 1.3.6.1.4.1.1751.2.18.15.32 integer read-only
Success: Routing Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again after 1 sec and we will return either Success or Noroutes. Enumeration: 'tryAgain': 3, 'success': 1, 'noRoutes': 2.
                           vpnTrapStatus 1.3.6.1.4.1.1751.2.18.15.33 integer read-only
Return codes for route server VPN level operations. vpnAddOk(1) VPN Creation OK vpnInternalFailure(2) Memory Corruption Failure vpnTooMany(3) Exceeded Max # of VPNs vpnBadSlot(4) Impossible Slot Number vpnBadId(5) VPN ID Must Be Between 1-6 vpnBadState(6) VPN State Machine Confused vpnBadTimerVal(7) Bad Timer Value: State Machine vpnAlreadyExists(8) VPN Already Exists vpnCantLocate(9), Cannot Find Referenced VPN vpnDelInProgress(10) Deletion In Progress -Must Wait vpnLockedIdle(11) VPN Taken Out Of Service vpnGeneralFailure(12) Reference Prev.Trap For Reason vpnNotAllowed(13) Operation Not Allowed vpnShutting(14) Shutting Down VPN -Must Wait vpnDisabled(15) Some VPN SubSystem Not Working vpnModifyOk(16) Modify Operation OK Enumeration: 'vpnBadTimerVal': 7, 'vpnLockedIdle': 11, 'vpnShutting': 14, 'vpnBadId': 5, 'vpnGeneralFailure': 12, 'vpnAlreadyExists': 8, 'vpnInternalFailure': 2, 'vpnDisabled': 15, 'vpnBadState': 6, 'vpnCantLocate': 9, 'vpnDelInProgress': 10, 'vpnTooMany': 3, 'vpnBadSlot': 4, 'vpnNotAllowed': 13, 'vpnModifyOk': 16, 'vpnAddOk': 1.
                           ipIntfStatus 1.3.6.1.4.1.1751.2.18.15.34 integer read-only
Return codes for route server IP interface operations. intOK(1) Interface OK. intIntFailure(2) Memory Corruption intTooMany(3) Exceeded Max # Of Interfaces intBadSlot(4) Impossible Slot Number intBadId(5), Impossible Interface ID intBadState(6) State Machine Confused intBadTimer(7) Bad Timer Value: State Machine intExists(8) Interface Already Exists intCantFind(9) Unused intDelInProgress(10) Deleting: -Must Wait intLockedIdle(11) Interface Taken Out Of Service intBadNetMask(12) Illegal Network Mask intShutting(13) Shutting Down -Must Wait intDisabled(14) Some Subsystem Not Working intNotHostAddr(15) Host Address Is Missing intBadIpAddr(16) Illegal IP Address intBadRouterId(17) Illegal VPN/Router ID intBadIntfId(18) Illegal Interface ID intCantFindRouter(19) No Corresponding VPN intCantFindIntf(20) Interface Does Not Exist intCantOnSameSubnet(21) Interface Already On This Subnet intCantModIntfAddr(22) Cannot Change Interface Addr intCantModIntfMask(23) Cannot Change Interface Mask intCantModIntfRipVer(24) Cannot Change Rip Ver # Enumeration: 'intDisabled': 14, 'intTooMany': 3, 'intCantFind': 9, 'intCantFindIntf': 20, 'intDelInProgress': 10, 'intBadTimer': 7, 'intCantModIntfMask': 23, 'intCantFindRouter': 19, 'intNotHostAddr': 15, 'intLockedIdle': 11, 'intOK': 1, 'intExists': 8, 'intBadSlot': 4, 'intCantModIntfRipVer': 24, 'intBadState': 6, 'intShutting': 13, 'intBadId': 5, 'intBadIntfId': 18, 'intBadNetMask': 12, 'intBadRouterId': 17, 'intIntFailure': 2, 'intCantOnSameSubnet': 21, 'intCantModIntfAddr': 22, 'intBadIpAddr': 16.
                           subChanStatus 1.3.6.1.4.1.1751.2.18.15.35 integer read-only
Return codes for route server sub channel connections operations. scOK(1) SubChannel OK scIntFailure(2) Memory Corruption scTooMany(3) Too Many SubChannels scBadSlot(4) Impossible Slot Number scBadId(5) Bad VPN ID scBadState(6), State Machine Confusion scBadTimerVal(7) Bad Timer Value: State Machine scExists(8) SubChannel Already Exists scCantFind(9) Unused scDelInProgress(10) Deleting: -Must Wait scLockedIdle(12) SubChannel Taken Out Of Serv. scSameVc(13) Connection In Use Already scFailedSetup(14) Referene Previous Trap scShutting(15) Shutting Down: -Must Wait scDisabled(16) SubSystem Disabled. scSetupErr(17) scRemvErr(18) Error Removing SubChannel scBadPortNo(19) Bad Port Specified scBadImIpAddr(20) Bad InBand IP Address scBadRouterId(21) Bad VPN/Router ID scBadIntfId(22) Impossible Interface ID scBadChanId(23) Impossible Channel ID scCantFindRouter(24) Cannot Find VPN scCantFindIntf(25) Cannot Find Interface scCantFindChan(26) Cannot Find SubChannel Enumeration: 'scBadRouterId': 21, 'scDisabled': 16, 'scBadState': 6, 'scDelInProgress': 10, 'scBadId': 5, 'scBadIntfId': 22, 'scRemvErr': 18, 'scCantFindRouter': 24, 'scFailedSetup': 14, 'scTooMany': 3, 'scIntFailure': 2, 'scCantFindChan': 26, 'scLockedIdle': 12, 'scBadSlot': 4, 'scShutting': 15, 'scBadChanId': 23, 'scCantFindIntf': 25, 'scBadImIpAddr': 20, 'scBadPortNo': 19, 'scCantFind': 9, 'scSetupErr': 17, 'scSameVc': 13, 'scBadTimerVal': 7, 'scOK': 1, 'scExists': 8.
                           routeSrvStatus 1.3.6.1.4.1.1751.2.18.15.36 integer read-only
Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. rsCardOK(1) Route Server OK rsModInitFail(2) Route Server Failed Module Init. rsIntfInitFail(3) Route Server Failed Intf. Init. rsPortInitFail(4) Route Server Failed Port Init rsRipUpdateIntOK(5) Rip Update Interval was updated ok for the route server card. rsRipUpdateIntFail(6) Rip Update Interval was not updated mostly because of some VPN's still in service. Enumeration: 'rsModInitFail': 2, 'rsCardOK': 1, 'rsPortInitFail': 4, 'rsRipUpdateIntFail': 6, 'rsIntfInitFail': 3, 'rsRipUpdateIntOK': 5.
                           apsFailureReasonCode 1.3.6.1.4.1.1751.2.18.15.37 integer read-only
Identification of cause for automatic protection switching failure. protectionCard-notPresent(1) protection card doesn't exist protectionCardType-notAPS(2) card type of protection card is not APS protectionCardType-incompatible(3) card types of protection card and working card are incompatible protectionCard-notInUnconfiguredState(4) protection card is already configured protectionCard-notUnprotected(5) protection card is not unprotected resource-access-failure(6) internal failure application incorrect-APSconfiguration(7) correct aps configuration: 1)oc3APSConfiguration of working port is working and oc3APSConfiguration of protection port is protection 2) oc3APSConfiguration of working and protection ports are unprotected protectionPort-Active(8) protection port must be inactive when breaking aps pair workingPort-localLoop-notAllowed(9) working port can't be configured as localLoop protectionPort-localLoop-notAllowed(10) protection port can't be configured as localLoop either Enumeration: 'protectionCardType-notAPS': 2, 'protectionCard-notInUnconfiguredState': 4, 'incorrect-APSconfiguration': 7, 'protectionCard-notPresent': 1, 'protectionCardType-incompatible': 3, 'protectionPort-Active': 8, 'protectionCard-notUnprotected': 5, 'protectionPort-localLoop-notAllowed': 10, 'workingPort-localLoop-notAllowed': 9, 'resource-access-failure': 6.
                           statRtStatus 1.3.6.1.4.1.1751.2.18.15.38 integer read-only
Return codes for route server static route condititions. statRtOk(1) Static Rt OK statRtIntFailure(2) Memory Corruption statRtMany(3) Too Many Static Routes statRtSlot(4) Impossible Slot ID statRtBadId(5) Bad VPN ID statRtBadState(6) State Machine Confusion statRtBadTimer(7) Bad Timer Value: State Machine statRtExists(8) Static Rt Already Exists statRtCantFind(9) Unused statRtDelInProgress(10) Deleting: -Must Wait statRtLockedIdle(11) Static Rt Taken Out Of Service statRtBadNetMask(12) Bad Network Mask statRtCorrelation(13) Internal Correlation Error statRtShutting(14) Shutting Down: -Must Wait statRtDisabled(15) SubSystem Failure statRtBadMetric(16) Illegal Metric Value statRtBadIPAddr(17) Bad Static Route IP Address intfRtExists(18) Static Route On Different Intf. statRtBadSlot(19) Impossible Slot ID statRtBadRouterId(20) Bad VPN/Router ID statRtBadRouteId(21) Illegal Static Route ID statRtBadRouteNetMask(22) Bad Stat Route Network Mask statRtBadRouteIpAddr(23) Bad Interface IP Address statRtBadGtwyIpAddr(24) Bad Gateway IP Address statRtBadDestIpAddr(25) Bad Destination IP Address statRtBadDestNetMask(26) Bad Destination IP Mask statRtCantFindRouter(27) Cannot Find VPN statRtCantFindRoute(28) Cannot Find Static Route Enumeration: 'statRtDisabled': 15, 'statRtBadRouterId': 20, 'statRtBadMetric': 16, 'statRtShutting': 14, 'statRtCorrelation': 13, 'statRtOk': 1, 'statRtIntFailure': 2, 'statRtDelInProgress': 10, 'statRtExists': 8, 'statRtBadGtwyIpAddr': 24, 'statRtBadTimer': 7, 'statRtBadSlot': 19, 'statRtCantFind': 9, 'statRtBadRouteIpAddr': 23, 'statRtLockedIdle': 11, 'statRtBadId': 5, 'statRtBadDestNetMask': 26, 'statRtCantFindRoute': 28, 'statRtBadRouteNetMask': 22, 'intfRtExists': 18, 'statRtBadState': 6, 'statRtBadRouteId': 21, 'statRtBadDestIpAddr': 25, 'statRtBadIPAddr': 17, 'statRtSlot': 4, 'statRtMany': 3, 'statRtCantFindRouter': 27, 'statRtBadNetMask': 12.
                           portFailureReasonCode 1.3.6.1.4.1.1751.2.18.15.39 integer read-only
Identification of cause for failure in changing the parameters of a port insufficientModuleBandwidth(1) insufficient module bandwidth localLoopNotAllowedWhenInAPS(2) local loop is not allowed when a port is in an automatic switching pair. msBitStuffingEnabledOnlyForCE(3) if msBitStuffing is enabled, only interface type circuit emulation is allowed invalidOption(4) invalid option hasInterfaceInService(5) interface is in-service unsupportedBaudRate(6) the baud rate is not supported msLOSDetectionNotEnabled(7) msLOSDetection is not enabled Enumeration: 'msBitStuffingEnabledOnlyForCE': 3, 'unsupportedBaudRate': 6, 'localLoopNotAllowedWhenInAPS': 2, 'invalidOption': 4, 'insufficientModuleBandwidth': 1, 'msLOSDetectionNotEnabled': 7, 'hasInterfaceInService': 5.
                           dlciNumber 1.3.6.1.4.1.1751.2.18.15.40 integer32 read-only
The number of the dlci being used.
                           ipAddrNumber 1.3.6.1.4.1.1751.2.18.15.41 ipaddress read-only
The IP address of the host/network to be echoed
                           pingStatusReasonCode 1.3.6.1.4.1.1751.2.18.15.42 integer read-only
The response value - Alive destination can be reached Not Alive destination can't be reached Enumeration: 'not-Alive': 2, 'alive': 1.
                           primarySoftwareVersion 1.3.6.1.4.1.1751.2.18.15.43 octet string read-only
Software version running on primary cpu.
                           backupSoftwareVersion 1.3.6.1.4.1.1751.2.18.15.44 octet string read-only
Software version running on backup cpu.
                           oamActDeactResultCode 1.3.6.1.4.1.1751.2.18.15.45 integer read-only
Various result codes for the operator's command for OAM Activation-Deactivation. eteCCActSuccTowardsFarEnd: eteCCActSuccTowardsNearEnd: eteCCActSuccTowardsBothEnd: eteCCDeactSuccTowardsFarEnd: eteCCDeactSuccTowardsNearEnd: eteCCDeactSuccTowardsBothEnd: ete CC Act/Deact-request send out to far/near/both end eteCCActDeniedTowardsFarEnd: eteCCActDeniedTowardsNearEnd: eteCCActDeniedTowardsBothEnd: eteCCDeactDeniedTowardsFarEnd: eteCCDeactDeniedTowardsNearEnd: eteCCDeactDeniedTowardsBothEnd: ete CC Act/Deact-request is denied. eteCCActFailedTowardsFarEnd: eteCCActFailedTowardsNearEnd: eteCCActFailedTowardsBothEnd: eteCCDeactFailedTowardsFarEnd: eteCCDeactFailedTowardsNearEnd: eteCCDeactFailedTowardsBothEnd: ete CC Act/Deact-request is failed sent out segCCActSuccTowardsFarEnd: segCCActSuccTowardsNearEnd: segCCActSuccTowardsBothEnd: segCCDeactSuccTowardsFarEnd: segCCDeactSuccTowardsNearEnd: segCCDeactSuccTowardsBothEnd: segment CC Act/Deact-request send out to far/near/both end. segCCActDeniedTowardsFarEnd: segCCActDeniedTowardsNearEnd: segCCActDeniedTowardsBothEnd: segment CC Act-request is denied. segCCActFailedTowardsFarEnd: segCCActFailedTowardsNearEnd: segCCActFailedTowardsBothEnd: ete CC Act-request is failed sent out. oamReqFunctionNotImplemented: The function user issued is not impemeted. oamActDeactPrevReqInProgress: this interface is in wait for response state. SendPMCell: a management cell has been sent out to IO card indicating PM cell need to be sent. eteReceiveBRErrMessage: a BR message has been forwarded to CPU indicating BR error. receiveFPMErrMessage: a FPM message has been forwarded to CPU indicating FPM error. Enumeration: 'oamEteLossOfContinuityCleared': 40, 'etePMBRActDeniedTowardsNearEnd': 62, 'segPMBRActFailedTowardsFarEnd': 88, 'eteCCDeactFailedTowardsFarEnd': 16, 'oamActDeactPMOnlySupportOC3': 43, 'oamNotSupportedForThisConnection': 36, 'segCCActSuccTowardsFarEnd': 19, 'etePMBRActDeniedTowardsBothEnd': 63, 'eteCCDeactDeniedTowardsNearEnd': 14, 'eteCCDeactDeniedTowardsBothEnd': 15, 'eteCCActSuccTowardsNearEnd': 2, 'segPMActFailedTowardsNearEnd': 77, 'segPMActDeniedTowardsFarEnd': 73, 'eteCCDeactFailedTowardsBothEnd': 18, 'segPMBRActSuccTowardsBothEnd': 84, 'etePMBRDeactSuccTowardsNearEnd': 68, 'segCCDeactSuccTowardsFarEnd': 28, 'segCCActFailedTowardsNearEnd': 26, 'eteCCDeactSuccTowardsBothEnd': 12, 'eteCCDeactFailedTowardsNearEnd': 17, 'segPMActFailedTowardsFarEnd': 76, 'etePMBRActSuccTowardsNearEnd': 59, 'eteCCActFailedTowardsNearEnd': 8, 'etePMBRActSuccTowardsBothEnd': 60, 'segPMBRActDeniedTowardsBothEnd': 87, 'oamActDeactInvalidIntf': 35, 'etePMBRDeactSuccTowardsFarEnd': 67, 'etePMBRActFailedTowardsBothEnd': 66, 'segCCActDeniedTowardsBothEnd': 24, 'segCCActDeniedTowardsFarEnd': 22, 'segPMActDeniedTowardsNearEnd': 74, 'segPMActDeniedTowardsBothEnd': 75, 'eteCCActFailedTowardsFarEnd': 7, 'oamPMBRnotSupportedForThisConnection': 45, 'eteCCActSuccTowardsFarEnd': 1, 'segPMBRActDeniedTowardsNearEnd': 86, 'segCCActSuccTowardsBothEnd': 21, 'oamEteLossOfContinuitySet': 39, 'oamActDeactInvalidParams': 34, 'segCCActFailedTowardsBothEnd': 27, 'oamPMnotSupportedForThisConnection': 44, 'etePMActSuccTowardsNearEnd': 47, 'etePMBRActFailedTowardsNearEnd': 65, 'oamPrevActDeactReqFailed': 38, 'segPMBRActFailedTowardsBothEnd': 90, 'etePMActFailedTowardsBothEnd': 54, 'eteCCActDeniedTowardsFarEnd': 4, 'etePMActSuccTowardsFarEnd': 46, 'oamActDeactPrevReqInProgress': 33, 'oamSegLossOfContinuitySet': 41, 'etePMBRActDeniedTowardsFarEnd': 61, 'etePMActDeniedTowardsNearEnd': 50, 'etePMDeactSuccTowardsBothEnd': 57, 'eteSendPMCell': 94, 'etePMActDeniedTowardsFarEnd': 49, 'segCCActDeniedTowardsNearEnd': 23, 'etePMBRActSuccTowardsFarEnd': 58, 'segPMDeactSuccTowardsFarEnd': 79, 'oamReqFailLocRsrcUnavl': 32, 'etePMDeactSuccTowardsFarEnd': 55, 'segPMBRDeactSuccTowardsFarEnd': 91, 'eteReceiveBRErrMessage': 95, 'segPMActSuccTowardsBothEnd': 72, 'segCCActSuccTowardsNearEnd': 20, 'segPMActSuccTowardsFarEnd': 70, 'eteCCDeactSuccTowardsNearEnd': 11, 'segCCDeactSuccTowardsNearEnd': 29, 'eteCCActFailedTowardsBothEnd': 9, 'eteCCDeactDeniedTowardsFarEnd': 13, 'segPMBRActFailedTowardsNearEnd': 89, 'segPMBRDeactSuccTowardsNearEnd': 92, 'oamCCnotSupportedForThisConnection': 37, 'segPMActSuccTowardsNearEnd': 71, 'segPMActFailedTowardsBothEnd': 78, 'segPMBRActSuccTowardsFarEnd': 82, 'segPMDeactSuccTowardsNearEnd': 80, 'segPMDeactSuccTowardsBothEnd': 81, 'segPMBRDeactSuccTowardsBothEnd': 93, 'receiveBRErrMessage': 96, 'segCCDeactSuccTowardsBothEnd': 30, 'eteCCActDeniedTowardsBothEnd': 6, 'segPMBRActDeniedTowardsFarEnd': 85, 'eteCCActDeniedTowardsNearEnd': 5, 'etePMActSuccTowardsBothEnd': 48, 'etePMBRDeactSuccTowardsBothEnd': 69, 'eteCCDeactSuccTowardsFarEnd': 10, 'oamReqFunctionNotImplemented': 31, 'etePMBRActFailedTowardsFarEnd': 64, 'segPMBRActSuccTowardsNearEnd': 83, 'oamSegLossOfContinuityCleared': 42, 'etePMDeactSuccTowardsNearEnd': 56, 'sendPMCell': 98, 'receiveFPMErrMessage': 97, 'segCCActFailedTowardsFarEnd': 25, 'etePMActFailedTowardsFarEnd': 52, 'etePMActDeniedTowardsBothEnd': 51, 'etePMActFailedTowardsNearEnd': 53, 'eteCCActSuccTowardsBothEnd': 3.
                           tasCmprsAnnceReasonCode 1.3.6.1.4.1.1751.2.18.15.46 integer read-only
The result of a compress announcement request. Enumeration: 'cmprs-Fail-connections-Fail': 3, 'cmprs-Fail-resource-unavail': 5, 'cmprs-success': 1, 'cmprs-Fail-equipment-Fail': 2, 'cmprs-Fail-resource-busy': 4.
                           tasTstLineReasonCode 1.3.6.1.4.1.1751.2.18.15.47 integer read-only
The result of a test line request. Enumeration: 'tst-Fail-invalid-params': 3, 'tst-Fail-resource-busy': 5, 'tst-Fail-resource-unavail': 4, 'tst-success': 1, 'tst-Fail-equipment-Fail': 2.
                           gr303PPSReasonCode 1.3.6.1.4.1.1751.2.18.15.48 integer read-only
These reason codes are the result of GR303 Path Protection Switching (PPS) command issued by user Enumeration: 'userCommandFailed-badPathId': 5, 'forced': 1, 'normal': 2, 'userCommandFailed-maxRetry': 6, 'userCommandFailed-unknown': 8, 'userCommandFailed-inprogress': 7, 'userCommandFailed-PathOos': 4, 'userCommandFailed-inhibited': 3.
                           gr303PPSSource 1.3.6.1.4.1.1751.2.18.15.49 integer read-only
Indicates the initiator of the PPS switching Enumeration: 'suspendedByLocalAgent': 6, 'none': 1, 'byLocalAgent': 4, 'byUser': 3, 'byIdt': 2, 'suspendedByIdt': 5.
                           tasMemReasonCode 1.3.6.1.4.1.1751.2.18.15.50 integer read-only
The result of a memory init request. Enumeration: 'mem-init-success': 1, 'mem-init-Fail': 2.
                           tasTrapTstId 1.3.6.1.4.1.1751.2.18.15.51 integer read-only
Announcement ID for trap.
                           tasTrapAnnceId 1.3.6.1.4.1.1751.2.18.15.52 integer read-only
test id for trap.
                           atmVpi 1.3.6.1.4.1.1751.2.18.15.53 integer read-only
Vpi is used in identification of Traps
                           atmVci 1.3.6.1.4.1.1751.2.18.15.54 integer read-only
Vci is used in identification of Traps
                           iptResultCode 1.3.6.1.4.1.1751.2.18.15.55 integer read-only
Various result codes for the operator's command forsetting/deleting interface protection group. interfaceProtectioniptAlreadyExistInterface: Expect another interface to be protected. interfaceProtectioniptInvalidInterface:interface invalid interfaceProtectioniptInvalidParams: invalid Parameters interfaceProtectioniptTryToDeleteEmptyTable:Table is already empty,can not be deleted . interfaceProtectioniptInvalidConfiguation: interfaceProtectioniptSuccessfulSwichOver: interface is switched over to the secondry interface. interfaceProtectioniptSuccessfulSwichBack: interface is switched back from secondry interface. interfaceProtectioniptFailedSwichOver: interface is failed switched over to the secondry interface. interfaceProtectioniptFailedSwichBack: interface is failed switched back from secondry interface. Enumeration: 'interfaceProtectioniptSuccessfulSwichOver': 6, 'interfaceProtectioniptInvalidInterface': 2, 'interfaceProtectioniptAlreadyExistInterface': 1, 'interfaceProtectioniptInvalidParams': 3, 'interfaceProtectioniptSuccessfulSwichBack': 7, 'interfaceProtectioniptTryToDeleteEmptyTable': 4, 'interfaceProtectioniptInvalidConfiguation': 5, 'interfaceProtectioniptFailedSwichOver': 8, 'interfaceProtectioniptFailedSwichBack': 9.
                           pgtResultCode 1.3.6.1.4.1.1751.2.18.15.56 integer read-only
Various result codes for the operator's command for interface protection . Enumeration: 'interfaceProtectionpgtAlreadyExistInterface': 1, 'interfaceProtectionpgtSuccessfulSwichBack': 6, 'interfaceProtectionpgtInvalidParams': 3, 'interfaceProtectionpgtFailedSwichOver': 7, 'interfaceProtectionpgtFailedSwichBack': 8, 'interfaceProtectionpgtInvalidConfiguation': 9, 'interfaceProtectionpgtryToDeleteEmptyTable': 4, 'interfaceProtectionpgtSuccessfulSwichOver': 5, 'interfaceProtectionpgtInvalidInterface': 2.
                           tasmControlBlockAllocFailReasonCode 1.3.6.1.4.1.1751.2.18.15.57 integer read-only
The result of a tasm control block memory allocation request. Enumeration: 'res-alloc-Fail-line-test-control-blocks-mem-unavail': 4, 'res-alloc-success': 1, 'res-alloc-Fail-announce-control-blocks-mem-unavail': 2, 'res-alloc-Fail-digit-control-blocks-mem-unavail': 3.
                           tasmCacheMemAllocFailReasonCode 1.3.6.1.4.1.1751.2.18.15.58 integer read-only
The result of a tasm control block memory allocation request. Enumeration: 'res-alloc-Fail-announce-cache-mem-unavail': 2, 'res-alloc-success': 1.
                           atmTrunkingConfigFailureCode 1.3.6.1.4.1.1751.2.18.15.59 integer read-only
An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has already been configured, the parameters can not be changed or apply again. localIWFAtmAddressError(2): the ATM Address for Local IWF is not valid or this address has been used by someone else. localIWFIdOutOfRange(3): the Identification of Local IWF is out of range. maxNumberRmtIWFOutOfRange(4): the maximum number of Remote IWF is out of range. rmtIWFAlreadyConfigured(5): this remote IWF has already been configured( with index atmTrunkingRmtIWFIdentifier). rmtIWFIdOutOfRange: the identifier for the remote IWF is out of range. rmtIWFAtmAddressError: the ATM Address for remote IWF is not valid or this address has been used by someone else. vccIdError: the VCC ID for the SigVcc or BrVcc is 0, or this VCC ID is out of range or it has been used by someone else. vccPvcParameterNotAcceptable: the parameters of PVC side, including slot, port, channel, vpi, vci, are not acceptable. vccTrafficParameterNotValid: the VCC traffic parameters are not acceptable, including FwPcr01, BwPcr01, FwScr01, BwScr01, FWMbs01, BwMbs01, BrVccServiceType, BrVccSarType. vccViVuniNotValid: the configuration of Egress Vi/VUNI is not acceptable. vccTrunkParameterNotValid: the parameters for the Trunk is not supported, including BrVccMaxAal2ChanId, BrVccCircuitModeDataSupp, BrVccFrameModeSupp, BrVccFaxModeSupp, CASPktXportSupp, BrVccDTMFPktXportSupp, BrVccMFR1PktXportSupp, BrVccMFR2PktXportSupp, BrVccPCMEncoding, BrVccMaxFrameLength, BrVccIdleChannSuprSupp, BrVccSilenceDetSupp, BrVccCompressionSpec,AudioProfileId, SigVccSignaling. vccTrunkFeatureParameterNotValid: PSAX proprietary feature parameters not supported including SigVccInactiveTimer, SigVccRetryTimer, SigVccRetryLimit, BrVccInactiveTimer, BrVccRetryTimer, BrVccRetryLimit, BrVccGr303Supp, BrVccOamStatus. localIwfNotConfigured(14) : Local IWF not Configured localIwfIdNotMatch(15): specified Local IWF not match localIwfStatus(16): this operation is not supported because of the status of Local IWF rmtIwfNotConfigured(17): Remote IWF Not Configured rmtIwfModeNotCompatible(18): the Mode of Remote IWF is not compatiable rmtIwfStatus(19): this operation is not support because of the Status of Remote IWF vccAlreadyConfigured(20): This VCC has been configured vccPvcCacReject(21): PVC Configuration rejected by Cac Reservation Function requiredFieldMissing(22): mandatory fields missing outOfResource(23): Atm Trunking Task or System out of resource for this configuration rowStatusError(24):Row Status Error with the SNMP command generalErrorUnspecified(25): all other unspecified failure cause. Enumeration: 'vccViVuniNotValid': 11, 'vccAlreadyConfigured': 20, 'maxNumberRmtIWFOutOfRange': 4, 'generalErrorUnspecified': 25, 'rmtIWFAlreadyConfigured': 5, 'vccTrunkParameterNotValid': 12, 'rmtIwfStatus': 19, 'rmtIwfModeNotCompatible': 18, 'vccTrafficParameterNotValid': 10, 'localIWFAlreadyConfigured': 1, 'localIwfIdNotMatch': 15, 'rmtIwfNotConfigured': 17, 'rmtIWFIdOutOfRange': 6, 'localIWFAtmAddressError': 2, 'localIwfNotConfigured': 14, 'rmtIWFAtmAddressError': 7, 'localIwfStatus': 16, 'vccTrunkFeatureParameterNotValid': 13, 'vccIdError': 8, 'vccPvcCacReject': 21, 'requiredFieldMissing': 22, 'vccPvcParameterNotAcceptable': 9, 'rowStatusError': 24, 'localIWFIdOutOfRange': 3, 'outOfResource': 23.
                           sapphireIntfAddressFailReasonCode 1.3.6.1.4.1.1751.2.18.15.60 integer read-only
The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Illegal IP address assigned address not matching fail-not-match-InBandManagement-Switch-CPU-IP-Address(3) In-Band Management IP or Switch IP or CPU IP address fail-Switch-or-CPU-IP-Address-unconfigured(4) Switch IP or CPU IP address unconfigured fail-InBandManagement-IP-Address-unconfigured(5) InBandManagement IP address unconfigured. Enumeration: 'address-assign-ok': 1, 'fail-not-match-InBandManagement-Switch-Cpu-IP-Address': 3, 'fail-Ilegal-IP-address': 2, 'fail-Switch-or-Cpu-IP-Address-unconfigured': 4, 'fail-InBandManagement-IP-Address-unconfigured': 5.
                           chassisOverTempAlarmReasonCode 1.3.6.1.4.1.1751.2.18.15.61 integer read-only
Indicator of presence of chassis over temperature alarm. Enumeration: 'clear': 2, 'set': 1.
                     sysControl 1.3.6.1.4.1.1751.2.18.16
                           saveConfiguration 1.3.6.1.4.1.1751.2.18.16.1 integer read-write
save configuration Enumeration: 'connections': 2, 'equipment': 1, 'all': 4, 'routing': 3.
                           upgradeSoftware 1.3.6.1.4.1.1751.2.18.16.2 integer read-write
software load management Enumeration: 'forceSynchronize': 7, 'upgrade': 1, 'forceFallBack': 4, 'forceUpgrade': 3, 'synchronize': 5, 'abort': 6, 'fallBack': 2, 'forceAbort': 8.
                           purgePvcConnections 1.3.6.1.4.1.1751.2.18.16.3 intfindex read-write
purge PVC connections on indicated interface
                           purgeRoutingTable 1.3.6.1.4.1.1751.2.18.16.4 integer read-write
purge indicated routing table Enumeration: 'iispVbr': 2, 'iispCbr': 1.
                           resetPortStatistics 1.3.6.1.4.1.1751.2.18.16.5 integer32 read-write
Reset the statistics counters for the given port Id (SSPP)
                           resetInterfaceStatistics 1.3.6.1.4.1.1751.2.18.16.6 intfindex read-write
Reset the interface counters for the given port Id (SSPPCCC)
                           resetAllStatistics 1.3.6.1.4.1.1751.2.18.16.7 integer32 read-write
Reset all port and interface statistics counters, accpets any integer value
                           upgradeIpAddress 1.3.6.1.4.1.1751.2.18.16.8 ipaddress read-write
IP Address for upgrade ftp server.
                           upgradeAccountName 1.3.6.1.4.1.1751.2.18.16.9 displaystring read-write
ftp account name for access to upgrade ftp server.
                           upgradeAccountPassword 1.3.6.1.4.1.1751.2.18.16.10 displaystring read-write
ftp account password for access to upgrade ftp server.
                           upgradeCdromFile 1.3.6.1.4.1.1751.2.18.16.11 displaystring read-write
cdrom file path on upgrade ftp server to upgrade image library.
                           upgradeLicenseKey 1.3.6.1.4.1.1751.2.18.16.12 displaystring read-write
software license key.
                           upgradeSwCopyStatus 1.3.6.1.4.1.1751.2.18.16.13 integer read-only
Current status of the ftp software upgrade download. Status of the software upgrade. noActivity is the initial start state from boot-up. working is set while ftp'ing the upgrade. The final state is one of doneSuccessfully, doneWithError, or aborted, all self-explanatory. It will stay in this state until re-boot or starting an upgrade. If the state is doneWithError then upgradeSwErrorStatus will be set to reflect the type of error. Enumeration: 'noActivity': 1, 'doneWithError': 4, 'aborted': 5, 'working': 2, 'doneSuccessfully': 3.
                           upgradeSwErrorStatus 1.3.6.1.4.1.1751.2.18.16.14 integer read-only
The result of the finish of the ftp software upgrade download. Set to a value 3-22 if upgradeSwCopyStatus is doneWithError. Set to none if upgradeSwCopyStatus is doneSuccessfully. Set to userAbort if upgradeSwCopyStatus is aborted. Enumeration: 'unableToWritePackageList': 21, 'unableToOpenFile': 16, 'invalidAccountName': 4, 'failureInCreatingMsgQ': 12, 'unableToWriteFile': 18, 'failureToTakeSemaphore': 25, 'failureInCopyingDataFiles': 13, 'taskSuspendOrDead': 22, 'libraryCRCFail': 7, 'unableToMakeFallBackTree': 27, 'unableToMakeNextTree': 15, 'invalidCdromFile': 6, 'unableToFindTaskSymbolName': 10, 'unableToOpenLibraryFile': 8, 'failureToRemoveFallBackTree': 26, 'invalidAccountPassword': 5, 'invalidIpAddress': 3, 'none': 1, 'unableToLoadLibraryModule': 9, 'failureInSpawningTask': 11, 'cpuAbort': 24, 'failureToRemoveNextTree': 14, 'unableToUpdateBackup': 23, 'unableToCompleteFtp': 19, 'fileCRCFail': 20, 'userAbort': 2, 'unableToMakeFtpConnection': 17.
                           systemSwCopy 1.3.6.1.4.1.1751.2.18.16.15 integer read-write
start copy system files according to the profile. When upgradeSwCopyStatus is working, the start request will be ignored. Abort will have effect only when upgradeSwCopystatus is working. Enumeration: 'start': 1, 'abort': 2.
                           fwReleaseTable 1.3.6.1.4.1.1751.2.18.16.16 no-access
Table of firmware inventory data
                                 fwReleaseEntry 1.3.6.1.4.1.1751.2.18.16.16.1 no-access
Row definition for firmware inventory
                                     fwReleaseSlot 1.3.6.1.4.1.1751.2.18.16.16.1.1 integer no-access
Physical slot location. Valid range is a number between 1 and 16.
                                     fwReleaseRunning 1.3.6.1.4.1.1751.2.18.16.16.1.2 octet string read-only
the firmware release currently running in a physical slot (e.g., 01.03.C01).
                                     fwReleaseEpromVersion 1.3.6.1.4.1.1751.2.18.16.16.1.3 octet string read-only
the version of the firmware located on the I/O card (e.g., 01.03.C01).
                                     fwReleaseCurrentVersion 1.3.6.1.4.1.1751.2.18.16.16.1.4 octet string read-only
the version of the firmware located in /scsi/current/io on the CPU disk drive (e.g., 01.03.C01).
                                     fwReleaseNextVersion 1.3.6.1.4.1.1751.2.18.16.16.1.5 octet string read-only
the version of the firmware located in /scsi/next/io on the CPU disk drive (e.g., 01.03.C01).
                                     fwReleaseUpdate 1.3.6.1.4.1.1751.2.18.16.16.1.6 integer read-write
Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive. Enumeration: 'activate': 1.
                                     fwReleaseUpgrade 1.3.6.1.4.1.1751.2.18.16.16.1.7 integer read-write
Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive. Enumeration: 'current': 2, 'eprom': 1, 'next': 3.
                           resetBridgeDomainStatistics 1.3.6.1.4.1.1751.2.18.16.17 integer32 read-write
Resets bridge domain statistics.
                           remoteRebootCommand 1.3.6.1.4.1.1751.2.18.16.18 integer read-write
type of reboot. Enumeration: 'chassisReboot': 101, 'backupCpuReboot': 102, 'ioCard6Reboot': 6, 'primaryCpuReboot': 103, 'ioCard5Reboot': 5, 'ioCard8Reboot': 8, 'ioCard15Reboot': 15, 'ioCard7Reboot': 7, 'ioCard4Reboot': 4, 'ioCard12Reboot': 12, 'ioCard16Reboot': 16, 'ioCard3Reboot': 3, 'ioCard14Reboot': 14, 'ioCard9Reboot': 9, 'ioCard10Reboot': 10, 'ioCard2Reboot': 2, 'allIOCardReboot': 100, 'ioCard1Reboot': 1, 'ioCard13Reboot': 13, 'ioCard11Reboot': 11, 'primaryCpuSwitchover': 200.
                           resetFrLmiStatistics 1.3.6.1.4.1.1751.2.18.16.19 integer32 read-write
Reset the frame relay LMI statistics counters for the given port Id (SSPPCCC)
                           removeConfigurationFiles 1.3.6.1.4.1.1751.2.18.16.20 integer read-write
Removes the user configuration/connection files from the hard disk on the cpu. Enumeration: 'all': 1.
                           systemFilesDirtyBitStatus 1.3.6.1.4.1.1751.2.18.16.21 integer read-only
Bit mask for system files: 0: all are clean 1: console.def 2: ecd.def 4: ssid.def 8: cnctn.db 16: iisp.cbr 32: iisp.vbr 64: spvc.db 128: vipr.cfg 256: fwc.def 512: vi.db 1024: iproute.db 2048: atmvuni.db
                           resetAtmIlmiStatistics 1.3.6.1.4.1.1751.2.18.16.22 integer32 read-write
Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC)
                           resetImaGrpChannelStatistics 1.3.6.1.4.1.1751.2.18.16.23 intfindex read-write
Reset the IMA Group Statistics counters for the given port Id (SSPPCCC)
                           oc3APSResetStats 1.3.6.1.4.1.1751.2.18.16.24 integer32 read-write
Reset the oc3aps Group Statistics counters for the given port Id (SSPP)
                           resetsonetSectionStatistics 1.3.6.1.4.1.1751.2.18.16.25 integer32 read-write
Reset the sonetSectionCurrent Statistics counters for the given port Id (SSPP)
                           resetsonetLineStatistics 1.3.6.1.4.1.1751.2.18.16.26 integer32 read-write
Reset the sonetLineCurrent Statistics counters for the given port Id (SSPP)
                           resetsonetVTPathStatistics 1.3.6.1.4.1.1751.2.18.16.27 integer32 read-write
Reset the sonetVTPathCurrent Statistics counters for the given port Id (SSPP)
                           viprVpnReset 1.3.6.1.4.1.1751.2.18.16.28 integer32 read-write
Reset the VPN statistics for VPN specified by (SSVV)
                           svcRetBackupStatus 1.3.6.1.4.1.1751.2.18.16.29 integer read-only
Indicates backup status wrt SVC retention Enumeration: 'no-sync': 1, 'sync-in-progress': 2, 'fully-sync': 3.
                           resetsonetPathStatistics 1.3.6.1.4.1.1751.2.18.16.30 integer32 read-write
Reset the sonetPathCurrent Statistics counters for the given port Id (SSPP)
                           ambientTemperature 1.3.6.1.4.1.1751.2.18.16.31 integer32 read-only
Ambient temperature in degree Celcius where the system is kept
                           remoteDbServerGroup 1.3.6.1.4.1.1751.2.18.16.32
                                 remoteDbServerIpAddress 1.3.6.1.4.1.1751.2.18.16.32.1 ipaddress read-write
IP Address for remote database server.
                                 remoteDbServerLogin 1.3.6.1.4.1.1751.2.18.16.32.2 displaystring read-write
ftp account name for remote database server.
                                 remoteDbServerPassword 1.3.6.1.4.1.1751.2.18.16.32.3 displaystring read-write
ftp account password for remote database server.
                                 remoteDbServerDirectory 1.3.6.1.4.1.1751.2.18.16.32.4 displaystring read-write
directory on remote database server where to save/restore database files from.
                                 remoteDbCommand 1.3.6.1.4.1.1751.2.18.16.32.5 integer read-write
remote database operation. Enumeration: 'remoteLoad': 3, 'remoteSave': 2, 'noOperation': 1.
                                 remoteDbOperationStatus 1.3.6.1.4.1.1751.2.18.16.32.6 integer read-only
Current status of remote database command. Enumeration: 'noActivity': 1, 'doneWithError': 4, 'aborted': 5, 'working': 2, 'doneSuccessfully': 3.
                                 remoteDbOperationErrorStatus 1.3.6.1.4.1.1751.2.18.16.32.7 integer read-only
The result at the finish of remote database operation. Enumeration: 'none': 0, 'unableToOpenDatabaseFile': 3, 'invalidDirectory': 2, 'unableToUpdateBackup': 6, 'unableToCompleteFtp': 4, 'databaseSanityFail': 5, 'unableToMakeFtpConnection': 1.
                     stratumConfig 1.3.6.1.4.1.1751.2.18.17
                           stratumSyncSource 1.3.6.1.4.1.1751.2.18.17.1 integer read-write
Clock source for the stratum card - lineTiming: must have slot and port specified in stratumPrimaryLineId. compositeClock: local clock must be available. Enumeration: 'freerun': 3, 'compositeClock': 2, 'e1ETSI': 5, 'lineTiming': 1, 't1BITS': 4.
                           stratumPrimaryLineId 1.3.6.1.4.1.1751.2.18.17.2 integer32 read-write
Format SSPP (slot and port #'s) to be used when lineTiming is specified in stratumSyncSource.
                           stratumSecondaryLineId 1.3.6.1.4.1.1751.2.18.17.3 integer32 read-write
Format SSPP (slot and port #'s) to be used if the primary line has failed. Zeros imply that the stratum should switch to holdover mode instead.
                           stratumLevel 1.3.6.1.4.1.1751.2.18.17.4 integer read-write
Enable or disable the switching over to stratum 4 when stratum 3 is not possible. Enumeration: 'stratum3': 1, 'stratum4': 2.
                           stratumLineCommand 1.3.6.1.4.1.1751.2.18.17.5 integer read-write
Forces the stratum card to use one of the two specified lines as its clock source when the stratumSyncSource is lineTiming. Enumeration: 'gotoPrimaryLine': 1, 'gotoSecondaryLine': 2.
                           stratumLineTimingStatus 1.3.6.1.4.1.1751.2.18.17.6 integer read-only
Represents the source of the current clock. Enumeration: 'none': 3, 'secondaryLine': 2, 'primaryLine': 1.
                           stratumMode 1.3.6.1.4.1.1751.2.18.17.7 integer read-only
Current status of the primary stratum card. synchronized3(1) stratum is synchronized with accuracy 4.6 x 10e-6 synchronized4(2) stratum is synchronized with accuracy 3.2 x 10e-5 holdover(3) an operating condition of a clock that has lost its controlling input and is using stored data acquired while in normal operation, to control its output freerun(4) an operating condition of the clock whose output signals are internally controlled cardRemoved(5) stratum removed Enumeration: 'synchronized3': 1, 'freerun': 4, 'holdover': 3, 'cardRemoved': 5, 'synchronized4': 2.
                           stratumBackupMode 1.3.6.1.4.1.1751.2.18.17.8 integer read-only
Current status of the backup stratum card. Enumeration: 'synchronized3': 1, 'freerun': 4, 'holdover': 3, 'cardRemoved': 5, 'synchronized4': 2.
                           stratumRefFailAction 1.3.6.1.4.1.1751.2.18.17.9 integer read-write
Defines whether the stratum should switch to freerun or holdover on reference clock failure. Enumeration: 'freerun': 2, 'holdover': 1.
                           stratumPortStatus 1.3.6.1.4.1.1751.2.18.17.10 integer read-only
Current status of the primary stratum card. portFOS indicates port frequency offset. Enumeration: 'noalarm': 2, 'portFOS': 6, 'portLOF': 4, 'portAIS': 3, 'unconfigured': 1, 'portLOS': 5.
                           stratumBkupPortStatus 1.3.6.1.4.1.1751.2.18.17.11 integer read-only
Current status of the backup stratum card. portFOS indicates port frequency offset. Enumeration: 'noalarm': 2, 'portFOS': 6, 'portLOF': 4, 'portAIS': 3, 'unconfigured': 1, 'portLOS': 5.
                           activeStratum 1.3.6.1.4.1.1751.2.18.17.12 integer read-only
Current status of the backup stratum card. Enumeration: 'stratumA': 1, 'stratumB': 2.
                     cellTest 1.3.6.1.4.1.1751.2.18.18
                           cellTestIfB 1.3.6.1.4.1.1751.2.18.18.1 intfindex read-write
Interface index used for testing cell transfer. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                           cellTestVpiB 1.3.6.1.4.1.1751.2.18.18.2 integer read-write
VPI value for testing cell transfer to an I/O card. Valid range is a number between 0 and 4095. If the I/O card interface is not ATM, then this will always be zero.
                           cellTestVcidB 1.3.6.1.4.1.1751.2.18.18.3 integer read-write
Virtual Check Id for testing cell transfer to an I/O card. Valid range is a number between 0 and 65535. If the I/O card interface is frame relay, this field acts as DLCI and the valid range is a number between 0 and 1023. If the I/O card interface is circuit emulation, then this will always be 0.
                           cellTestServiceType 1.3.6.1.4.1.1751.2.18.18.4 integer read-write
Service types for testing cell transfer Enumeration: 'vbr-rt1': 5, 'vbr-rt2': 4, 'ubr': 1, 'cbr4': 7, 'cbr1': 10, 'cbr3': 8, 'cbr2': 9, 'vbr-nrt2': 2, 'vbr-nrt1': 3, 'vbr-express': 6.
                           cellTestConnType 1.3.6.1.4.1.1751.2.18.18.5 integer read-write
Connection types for testing cell transfer Enumeration: 'duplex': 3, 'simplexRx': 2, 'simplexTx': 1.
                           cellTestProtocol 1.3.6.1.4.1.1751.2.18.18.6 integer read-only
Protocol (interface type) on the I/O Enumeration: 'frame-relay': 2, 'atm': 1, 'hdlc': 4.
                           cellTestPayLoadTx 1.3.6.1.4.1.1751.2.18.18.7 octet string read-write
PayLoad to be transmitted on I/O interface
                           cellTestPayLoadRx 1.3.6.1.4.1.1751.2.18.18.8 octet string read-only
Last PayLoad received on I/O interface
                           cellTestAction 1.3.6.1.4.1.1751.2.18.18.9 integer read-write
PayLoad received on I/O interface Enumeration: 'clearTxStats': 5, 'stop': 4, 'send': 1, 'send-10': 2, 'setupconn': 3, 'clearRxStats': 6.
                           cellTestRxPduCount 1.3.6.1.4.1.1751.2.18.18.10 integer32 read-only
Valid cells received (Input Billing Count)
                           cellTestTxPduCount 1.3.6.1.4.1.1751.2.18.18.11 integer32 read-only
Valid cells transmitted (Output Billing Count)
                           cellTestMismatchPduCount 1.3.6.1.4.1.1751.2.18.18.12 integer32 read-only
Number of times Rx payload mismatched with Tx payload.
                           cellTestStatus 1.3.6.1.4.1.1751.2.18.18.13 integer read-only
Indicates whether a cellTest test is in progress or not. Enumeration: 'running': 1, 'not-running': 2.
                           cellTestVUNIB 1.3.6.1.4.1.1751.2.18.18.14 integer read-write
VUNI id for testing cell transfer to an I/O card. This field is valid only for ATM interface.
                     sysInfo 1.3.6.1.4.1.1751.2.18.19
                           sysInfoTxOneCellTotal 1.3.6.1.4.1.1751.2.18.19.1 integer32 read-only
Total amount of cells within the transmit one cell pool.
                           sysInfoTxOneCellUsed 1.3.6.1.4.1.1751.2.18.19.2 integer32 read-only
Amount of cells currently being used within the transmit one cell pool.
                           sysInfoTxOneCellHigh 1.3.6.1.4.1.1751.2.18.19.3 integer32 read-only
High-water mark of cells used within the transmit one cell pool.
                           sysInfoRxOneCellTotal 1.3.6.1.4.1.1751.2.18.19.4 integer32 read-only
Total amount of cells within the receive one cell pool.
                           sysInfoRxOneCellUsed 1.3.6.1.4.1.1751.2.18.19.5 integer32 read-only
Amount of cells currently being used within the receive one cell pool.
                           sysInfoRxOneCellHigh 1.3.6.1.4.1.1751.2.18.19.6 integer32 read-only
High-water mark of cells used within the receive one cell pool.
                           sysInfoRxMultiCellTotal 1.3.6.1.4.1.1751.2.18.19.7 integer32 read-only
Total amount of multi-cells within the receive multi-cell pool.
                           sysInfoRxMultiCellUsed 1.3.6.1.4.1.1751.2.18.19.8 integer32 read-only
Amount of multi-cells currently being used within the receive multi-cell pool.
                           sysInfoRxMultiCellHigh 1.3.6.1.4.1.1751.2.18.19.9 integer32 read-only
High-water mark of multi-cells used within the receive multi-cell pool.
                           sysInfoMsgPoolTotal 1.3.6.1.4.1.1751.2.18.19.10 integer32 read-only
Total amount of messages within the message pool.
                           sysInfoMsgPoolUsed 1.3.6.1.4.1.1751.2.18.19.11 integer32 read-only
Amount of messages currently being used within the message pool.
                           sysInfoMsgPoolHigh 1.3.6.1.4.1.1751.2.18.19.12 integer32 read-only
High-water mark of messages used within the message pool.
                           sysInfoDiscFreeKBytes 1.3.6.1.4.1.1751.2.18.19.13 integer32 read-only
Amount of disc free space available in KB's.
                           sysInfoCpuUtilization1 1.3.6.1.4.1.1751.2.18.19.14 integer read-only
xx.yy% - cpuUtilization1 is the xx part of it.
                           sysInfoCpuUtilization2 1.3.6.1.4.1.1751.2.18.19.15 integer read-only
xx.yy% - cpuUtilization2 is the yy part of it.
                           sysInfoSysUptime 1.3.6.1.4.1.1751.2.18.19.16 integer32 read-only
Amount of time cpu has been up in seconds.
                           sysInfoBadCellRx 1.3.6.1.4.1.1751.2.18.19.17 integer32 read-only
The number of bad cells (BIP16) received so far.
                           sysInfoMisaligned 1.3.6.1.4.1.1751.2.18.19.18 integer32 read-only
The number of misaligned cells received so far.
                           sysInfoClockAErr 1.3.6.1.4.1.1751.2.18.19.19 integer read-only
Value is 1, TRUE, if the clock on backplane A is errored, otherwise, the value is 0, FALSE.
                           sysInfoClockBErr 1.3.6.1.4.1.1751.2.18.19.20 integer read-only
Value is 1, TRUE, if the clock on backplane B is errored, otherwise, the value is 0, FALSE.
                           sysInfoBIPAErr 1.3.6.1.4.1.1751.2.18.19.21 integer read-only
Value is 1, TRUE, if the cell circuit on backplane A is errored, otherwise, the value is 0, FALSE.
                           sysInfoBIPBErr 1.3.6.1.4.1.1751.2.18.19.22 integer read-only
Value is 1, TRUE, if the cell circuit on backplane B is errored, otherwise, the value is 0, FALSE.
                           sysInfoDiscTotalKBytes 1.3.6.1.4.1.1751.2.18.19.23 integer32 read-only
Amount of disc space available in KB's.
                           sysInfoRAMFreeKBytes 1.3.6.1.4.1.1751.2.18.19.24 integer32 read-only
Amount of RAM memory available for use in KB's.
                           sysInfoRAMTotalKBytes 1.3.6.1.4.1.1751.2.18.19.25 integer32 read-only
Amount of RAM memory available on cpu card in KB's.
                           msgPoolViewTable 1.3.6.1.4.1.1751.2.18.19.26 no-access
Table of Msg Pools In the System, Used only for diagnostic purposes
                                 msgPoolViewEntry 1.3.6.1.4.1.1751.2.18.19.26.1 no-access
Row definition of Msg Pool Table
                                     msgPoolViewIndex 1.3.6.1.4.1.1751.2.18.19.26.1.1 integer32 no-access
It is the index of the MsgPool array for which the information is requested. Information about Msgs Which are not there in the free pool is returned.A msg is said to be out of the free pool by comparing the signature. The limit being the max number of msgs allowed on the system
                                     msgPoolViewTskId 1.3.6.1.4.1.1751.2.18.19.26.1.2 integer32 read-only
Task Id of the Sender of the Particular Msg, This will give the integer value, has to be converted to hex for comparison
                                     msgPoolViewTskName 1.3.6.1.4.1.1751.2.18.19.26.1.3 displaystring read-only
Task Name of the Sender of the Particular Msg
                                     msgPoolViewMsgCmd 1.3.6.1.4.1.1751.2.18.19.26.1.4 integer32 read-only
msgCmd being sent by the sending Task
                           primaryCpuHwType 1.3.6.1.4.1.1751.2.18.19.27 integer read-only
Indicates the hardware version type of the primary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting 64MB-256MB Memory. Enumeration: 'notKnown': 1, 'version1': 2, 'version2': 3.
                           secondaryCpuHwType 1.3.6.1.4.1.1751.2.18.19.28 integer read-only
Indicates the hardware version type of the secondary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting 64MB-256MB Memory. Enumeration: 'notKnown': 1, 'version1': 2, 'version2': 3.
                           sysInfoDiskCheck 1.3.6.1.4.1.1751.2.18.19.29 integer read-only
Indicates the checking status of the disk in CPU card. Enumeration: 'ok': 1, 'error': 2.
                           switchAlarmStatus 1.3.6.1.4.1.1751.2.18.19.30 integer read-only
Current status of the alarm on the switch. notAvailable - The alarm status could not be retreived. none - No alarm is present. minor, major, critical - An alarm of the enumerated type is present Enumeration: 'notAvailable': 1, 'none': 2, 'critical': 5, 'major': 4, 'minor': 3.
                     ethernetConfig 1.3.6.1.4.1.1751.2.18.20
                           arp1Table 1.3.6.1.4.1.1751.2.18.20.1 no-access
Table of ARP cache data.
                               arp1Entry 1.3.6.1.4.1.1751.2.18.20.1.1 no-access
Row definition for ARP cache.
                                   arp1CardSlot 1.3.6.1.4.1.1751.2.18.20.1.1.1 integer no-access
Slot ethernet card is in.
                                   arp1BridgeGroupNum 1.3.6.1.4.1.1751.2.18.20.1.1.2 integer no-access
Bridge Group the entry belongs to.
                                   arp1IpAddress 1.3.6.1.4.1.1751.2.18.20.1.1.3 ipaddress no-access
Entry IP address.
                                   arp1PhysicalAddr 1.3.6.1.4.1.1751.2.18.20.1.1.4 octet string read-only
Entry physical address.
                                   arp1EntryAge 1.3.6.1.4.1.1751.2.18.20.1.1.5 integer32 read-only
Age of cache entry.
                           arp2Table 1.3.6.1.4.1.1751.2.18.20.2 no-access
Table of ARP cache data.
                               arp2Entry 1.3.6.1.4.1.1751.2.18.20.2.1 no-access
Row definition for ARP cache.
                                   arp2CardSlot 1.3.6.1.4.1.1751.2.18.20.2.1.1 integer no-access
Slot ethernet card is in.
                                   arp2BridgeGroupNum 1.3.6.1.4.1.1751.2.18.20.2.1.2 integer no-access
Bridge Group the entry belongs to.
                                   arp2PhysicalAddr 1.3.6.1.4.1.1751.2.18.20.2.1.3 octet string no-access
Entry physical address.
                                   arp2IpAddress 1.3.6.1.4.1.1751.2.18.20.2.1.4 ipaddress read-only
Entry IP address.
                                   arp2EntryAge 1.3.6.1.4.1.1751.2.18.20.2.1.5 integer32 read-only
Age of cache entry.
                           bridgeCacheTable 1.3.6.1.4.1.1751.2.18.20.3 no-access
Table of bridge cache data.
                               bridgeCacheEntry 1.3.6.1.4.1.1751.2.18.20.3.1 no-access
Row definition for bridge cache.
                                   bridgeCacheCardSlot 1.3.6.1.4.1.1751.2.18.20.3.1.1 integer no-access
Slot ethernet card is in.
                                   bridgeCacheBridgeGroupNum 1.3.6.1.4.1.1751.2.18.20.3.1.2 integer no-access
Bridge Group the entry belongs to.
                                   bridgeCachePhysicalAddr 1.3.6.1.4.1.1751.2.18.20.3.1.3 octet string no-access
Entry physical address.
                                   bridgeCacheType 1.3.6.1.4.1.1751.2.18.20.3.1.4 integer read-only
Type of Entry. Enumeration: 'policy': 3, 'learned': 1, 'permanent': 2.
                                   bridgeCacheSourcePort 1.3.6.1.4.1.1751.2.18.20.3.1.5 integer read-only
Port entry was obtained from.
                                   bridgeCacheEntryAge 1.3.6.1.4.1.1751.2.18.20.3.1.6 integer32 read-only
Age of cache entry.
                     alarmConfig 1.3.6.1.4.1.1751.2.18.21
                           alarmStatusInputBitmap 1.3.6.1.4.1.1751.2.18.21.1 octet string read-only
Remote status from external device. bit = 0 closed, bit = 1 open, LSB 15 bits represent 15 external inputs. MSB bit 15 is always 0.
                           alarmStatusOutputBitmap 1.3.6.1.4.1.1751.2.18.21.2 octet string read-write
Control output for alarm card. bit = 0 deactivated, bit = 1 activated, LSB 4 bits represent 4 external outputs. Bit 0 through bit 3 is output 1 through 4 Control output 4 will be activated upon power failure.
                           alarmSeverityLevelBitmap 1.3.6.1.4.1.1751.2.18.21.3 octet string read-write
Alarm severity level. bit = 0 noAlarm, bit = 1 Alarm present, LSB 3 bits represent severity levels. bit 0 = Minor Alarm, bit 1 = Major Alarm, bit 2 = Critical Alarm.
                           alarmAcoStatusBitmap 1.3.6.1.4.1.1751.2.18.21.4 octet string read-only
Audio alarm status. bit = 0 No alarm cutoff, bit = 1 Alarm cutoff, LSB 3 bits represent audio alarms. bit 0 = Local alarm cutoff, bit 1 = remote alarm cutoff, bit 2 = composite alarm cutoff status.
                     sysTest 1.3.6.1.4.1.1751.2.18.22
                           oamTest 1.3.6.1.4.1.1751.2.18.22.1
                               oamTestIfB 1.3.6.1.4.1.1751.2.18.22.1.1 intfindex read-write
Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                               oamTestVpiB 1.3.6.1.4.1.1751.2.18.22.1.2 integer read-write
VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095.
                               oamTestVciB 1.3.6.1.4.1.1751.2.18.22.1.3 integer read-write
VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535.
                               oamTestStatus 1.3.6.1.4.1.1751.2.18.22.1.4 integer read-only
Inidcates the current status of oam test. Enumeration: 'waiting-for-response': 6, 'successful': 3, 'timedout': 5, 'failure': 4, 'running': 2, 'not-running': 1.
                               oamTestAction 1.3.6.1.4.1.1751.2.18.22.1.5 integer read-write
Test action to be performed. Enumeration: 'sendContinuously': 2, 'resetMismatchCount': 6, 'stopTest': 3, 'resetTxCount': 4, 'resetRxCount': 5, 'sendLoopback': 1.
                               oamTestTxCount 1.3.6.1.4.1.1751.2.18.22.1.6 integer32 read-only
Valid cells transmitted.
                               oamTestRxCount 1.3.6.1.4.1.1751.2.18.22.1.7 integer32 read-only
Valid cells received.
                               oamTestMismatchCount 1.3.6.1.4.1.1751.2.18.22.1.8 integer32 read-only
Number of times Rx correlation tag is mismatched with the Tx correlation tag.
                               oamTestLocationID 1.3.6.1.4.1.1751.2.18.22.1.9 octet string read-write
Location ID of the ATM Node where the loopback is to occur.
                               oamTestLoopbackType 1.3.6.1.4.1.1751.2.18.22.1.10 integer read-write
OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, user specified locationId field value taken into account. Enumeration: 'end-to-end': 1, 'specific-location': 4, 'next-connection-point': 3, 'segment-endpoint': 2.
                           oamActDeactTable 1.3.6.1.4.1.1751.2.18.22.2 no-access
Table of oam activate and deactivate functions
                               oamActDeactEntry 1.3.6.1.4.1.1751.2.18.22.2.1 no-access
Row definition of oam activate and deactivate
                                   oamActDeactIfB 1.3.6.1.4.1.1751.2.18.22.2.1.1 intfindex no-access
Interface index for an OAM CC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   oamActDeactVpiB 1.3.6.1.4.1.1751.2.18.22.2.1.2 integer no-access
VPI value for an oam CC connection. Valid range is a number between 0 and 4095.
                                   oamActDeactVciB 1.3.6.1.4.1.1751.2.18.22.2.1.3 integer no-access
VCI value for oam CC connection. Valid range is a number between 0 and 65535.
                                   oamActDeactFuncType 1.3.6.1.4.1.1751.2.18.22.2.1.4 integer read-write
OAM Function type represents the OAM flow for activation or deactivattion for this connection. the possible function types activated in one connection are : fpm-and-br : forward performance monitoring/backward reporting fpm-only : forward performance monitoring continuity-check : continuity check pmbr-and-cc : forward performance monitoring/backward reporting and continuity check pm-and-cc : forward performance monitoring and continuity check Enumeration: 'continuity-check': 3, 'fpm-only': 2, 'pm-and-cc': 5, 'fpm-and-br': 1, 'pmbr-and-cc': 4.
                                   oamActDeactDirFlow 1.3.6.1.4.1.1751.2.18.22.2.1.5 integer read-write
The direction in which cells will be transmitted. Enumeration: 'both-way': 3, 'towards-far-end': 1, 'towards-near-end': 2.
                                   oamActDeactFlowType 1.3.6.1.4.1.1751.2.18.22.2.1.6 integer read-write
Flow Type. Enumeration: 'end-to-end': 1, 'segment': 2.
                                   oamActDeactBlkSizeAB 1.3.6.1.4.1.1751.2.18.22.2.1.7 integer read-write
Block Size A-B represents the size of the block of user cells taken into consideration for performance monitoring in A-B direction. Enumeration: 'size512': 3, 'size256': 2, 'size128': 1, 'size2048': 9, 'size8192': 6, 'size4096': 5, 'size32768': 8, 'size1024': 4, 'size16384': 7.
                                   oamActDeactBlkSizeBA 1.3.6.1.4.1.1751.2.18.22.2.1.8 integer read-write
Block Size A-B is the size of the block of user cells taken into consideration for performance monitoring in B-A direction. Enumeration: 'size512': 3, 'size256': 2, 'size128': 1, 'size2048': 9, 'size8192': 6, 'size4096': 5, 'size32768': 8, 'size1024': 4, 'size16384': 7.
                                   oamActDeactStsSrcPointEteCC 1.3.6.1.4.1.1751.2.18.22.2.1.9 integer read-only
Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSnkPointEteCC 1.3.6.1.4.1.1751.2.18.22.2.1.10 integer read-only
Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactRsltPrevReq 1.3.6.1.4.1.1751.2.18.22.2.1.11 integer read-only
Cause of Failure shows the reasons of failure of the last activation request on this connection form the local user. Enumeration: 'none': 7, 'locResrcUnavl': 3, 'oamUnsupported': 4, 'timedout': 2, 'successful': 8, 'funcNotImplemented': 6, 'denied': 1, 'reqCancelled': 5.
                                   oamActDeactRowStatus 1.3.6.1.4.1.1751.2.18.22.2.1.12 rowstatus read-write
row status
                                   oamActDeactStsSrcPointEtePM 1.3.6.1.4.1.1751.2.18.22.2.1.13 integer read-only
Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSnkPointEtePM 1.3.6.1.4.1.1751.2.18.22.2.1.14 integer read-only
Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSrcPointEtePMBR 1.3.6.1.4.1.1751.2.18.22.2.1.15 integer read-only
Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSnkPointEtePMBR 1.3.6.1.4.1.1751.2.18.22.2.1.16 integer read-only
Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactBRBlockError 1.3.6.1.4.1.1751.2.18.22.2.1.17 integer read-only
Backware reporting Block error for PM connection. Valid range is a number between 0 and 32768.
                                   oamActDeactBRLostInsertedCell 1.3.6.1.4.1.1751.2.18.22.2.1.18 integer read-only
Backware reporting lost inserted cell for PM connection. Valid range is a number between 0 and 32768.
                                   oamActDeactBRMisInsertedCell 1.3.6.1.4.1.1751.2.18.22.2.1.19 integer read-only
Backware reporting misinserted cell for PM connection. Valid range is a number between 0 and 32768.
                                   oamActDeactStsSrcPointSegPM 1.3.6.1.4.1.1751.2.18.22.2.1.20 integer read-only
Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSnkPointSegPM 1.3.6.1.4.1.1751.2.18.22.2.1.21 integer read-only
Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSrcPointSegPMBR 1.3.6.1.4.1.1751.2.18.22.2.1.22 integer read-only
Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSnkPointSegPMBR 1.3.6.1.4.1.1751.2.18.22.2.1.23 integer read-only
Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSrcPointSegCC 1.3.6.1.4.1.1751.2.18.22.2.1.24 integer read-only
Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                                   oamActDeactStsSnkPointSegCC 1.3.6.1.4.1.1751.2.18.22.2.1.25 integer read-only
Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point Enumeration: 'deactivated': 2, 'activated': 1, 'waitActConfirm': 3, 'waitDeactConfirm': 4.
                           oamLoopbackTable 1.3.6.1.4.1.1751.2.18.22.3 no-access
Table of oam loopback functions
                               oamLoopbackEntry 1.3.6.1.4.1.1751.2.18.22.3.1 no-access
Row definition of oam loop back
                                   oamLpbkIfB 1.3.6.1.4.1.1751.2.18.22.3.1.1 intfindex no-access
Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number.
                                   oamLpbkVpiB 1.3.6.1.4.1.1751.2.18.22.3.1.2 integer no-access
VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095.
                                   oamLpbkVciB 1.3.6.1.4.1.1751.2.18.22.3.1.3 integer no-access
VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535.
                                   oamLoopbackType 1.3.6.1.4.1.1751.2.18.22.3.1.4 integer read-write
OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, user specified locationId field value taken into account. Enumeration: 'end-to-end': 1, 'specific-location': 4, 'next-connection-point': 3, 'segment-endpoint': 2.
                                   oamLpbkLocationID 1.3.6.1.4.1.1751.2.18.22.3.1.5 octet string read-write
Location ID of the ATM Node where the loopback is to occur.
                                   oamLpbkAction 1.3.6.1.4.1.1751.2.18.22.3.1.6 integer read-write
Test action to be performed. endLoopbackContinuously is not used. Enumeration: 'sendLoopbackContinuously': 2, 'stopTest': 3, 'sendLoopbackOnce': 1, 'resetStats': 4.
                                   oamLpbkStatus 1.3.6.1.4.1.1751.2.18.22.3.1.7 integer read-only
Inidcates the current status of oam test. Enumeration: 'successful': 3, 'waiting-for-response': 2, 'inactive': 1, 'timedout': 4.
                                   oamLpbkTxCount 1.3.6.1.4.1.1751.2.18.22.3.1.8 integer32 read-only
Valid cells transmitted.
                                   oamLpbkRxCount 1.3.6.1.4.1.1751.2.18.22.3.1.9 integer32 read-only
Valid cells received.
                                   oamLpbkMismatchCount 1.3.6.1.4.1.1751.2.18.22.3.1.10 integer32 read-only
Number of times Rx correlation tag is mismatched with the Tx correlation tag.
                                   oamLpbkTimeout 1.3.6.1.4.1.1751.2.18.22.3.1.11 integer32 read-only
number of time out
                     fwDriverSup 1.3.6.1.4.1.1751.2.18.23
                           cardFwVerTable 1.3.6.1.4.1.1751.2.18.23.1 no-access
Table of card firware version status
                               cardFwVerEntry 1.3.6.1.4.1.1751.2.18.23.1.1 no-access
Row definition for card firmware version status
                                   cardFwVerSlot 1.3.6.1.4.1.1751.2.18.23.1.1.1 integer no-access
card slot number
                                   cardFwVerType 1.3.6.1.4.1.1751.2.18.23.1.1.2 integer32 read-write
Card type
                                   cardFwVerCurrent 1.3.6.1.4.1.1751.2.18.23.1.1.3 octet string read-only
Card firmware version currently loaded on firmware
                                   cardFwVerCurrentIsDefault 1.3.6.1.4.1.1751.2.18.23.1.1.4 integer32 read-only
curent driver is default
                                   cardFwVerNext 1.3.6.1.4.1.1751.2.18.23.1.1.5 octet string read-write
Card firmware version that user wants to upgrade to. The values are limited those supported by the release.
                                   cardFwVerNextIsDefault 1.3.6.1.4.1.1751.2.18.23.1.1.6 integer read-write
next driver is default
                                   cardFwDnldStatus 1.3.6.1.4.1.1751.2.18.23.1.1.7 integer read-only
firmware download procedure status Enumeration: 'cfgInvChksum': 18, 'retry': 2, 'cmplRepTimeout': 11, 'mapUnavailable': 13, 'reqRepTimeout': 10, 'removeCardBeforeFinish': 19, 'mapInvChksum': 14, 'drvInvHdrChksum': 8, 'drvUnavailable': 7, 'cfgCorrupted': 16, 'ioUnsupported': 20, 'wrongCardType': 5, 'failed': 1, 'done': 4, 'cfgUnavailable': 17, 'mapCorrupted': 12, 'drvInvRecChksum': 9, 'progress': 3, 'wrongCardSType': 6, 'mapNameImprop': 15.
                                   cardFwRetries 1.3.6.1.4.1.1751.2.18.23.1.1.8 integer32 read-only
Number of times firmware download procedure failed consequently.
                           fwDriverTable 1.3.6.1.4.1.1751.2.18.23.2 no-access
Table of available firmware drivers
                               fwDriverEntry 1.3.6.1.4.1.1751.2.18.23.2.1 no-access
Row definition for available firmware drivers
                                   fwSlotId 1.3.6.1.4.1.1751.2.18.23.2.1.1 integer32 no-access
driver slot id
                                   fwDriverType 1.3.6.1.4.1.1751.2.18.23.2.1.2 integer32 no-access
firmware driver type - definition consistent with cardType.
                                   fwIsDefault 1.3.6.1.4.1.1751.2.18.23.2.1.3 integer32 no-access
firmware driver wether default or not
                                   fwDriverName 1.3.6.1.4.1.1751.2.18.23.2.1.4 octet string no-access
firmware driver file name
                                   fwDriverFrn 1.3.6.1.4.1.1751.2.18.23.2.1.5 integer32 read-only
Firmware Release Number of firmware driver
                                   fwDriverSize 1.3.6.1.4.1.1751.2.18.23.2.1.6 integer32 read-only
file size of firmware driver
                                   fwDriverChecksum 1.3.6.1.4.1.1751.2.18.23.2.1.7 integer32 read-only
checksum of firmware driver file
                     viprConfig 1.3.6.1.4.1.1751.2.18.24
                           viprRouterConfigTable 1.3.6.1.4.1.1751.2.18.24.1 no-access
Table of Vipr Router Instance Information
                               viprRouterConfigEntry 1.3.6.1.4.1.1751.2.18.24.1.1 no-access
definition for VIPR Route instance attributes
                                   viprSlot 1.3.6.1.4.1.1751.2.18.24.1.1.1 integer32 no-access
The slot number of the Virtual Router card (SS)
                                   viprRouterId 1.3.6.1.4.1.1751.2.18.24.1.1.2 integer no-access
A unique Id for the Router Instance in a router card
                                   viprRouterName 1.3.6.1.4.1.1751.2.18.24.1.1.3 displaystring read-write
The ASCII name of the Router Instance
                                   viprRouterNoOfInterfaces 1.3.6.1.4.1.1751.2.18.24.1.1.4 integer read-only
This variable describes the no of interfaces defined in the Router Instance
                                   viprRouterNoOfRoutes 1.3.6.1.4.1.1751.2.18.24.1.1.5 integer read-only
This variable describes the no of static routes defined in the Router Instance
                                   viprRouterAdminStatus 1.3.6.1.4.1.1751.2.18.24.1.1.6 integer read-write
This variable represents the various X.731 states the Router state machine can take Administartively Enumeration: 'outOfService': 1, 'inService': 2.
                                   viprRouterOperStatus 1.3.6.1.4.1.1751.2.18.24.1.1.7 integer read-only
This variable represents the various X.731 states the Router state machine can take operationally Enumeration: 'outOfService': 1, 'unlocked-Init': 3, 'unlocked-Disable': 4, 'locked-Shutting': 5, 'inService': 2.
                                   viprRouterInitTmr 1.3.6.1.4.1.1751.2.18.24.1.1.8 integer32 read-write
This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state.
                                   viprRouterDisabWarnTmr 1.3.6.1.4.1.1751.2.18.24.1.1.9 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state.
                                   viprRouterShutDwnWarnTmr 1.3.6.1.4.1.1751.2.18.24.1.1.10 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state.
                                   viprRouterDisableWarning 1.3.6.1.4.1.1751.2.18.24.1.1.11 integer read-write
This variable when disabled will mask all the warning messages. Enumeration: 'disabled': 2, 'enabled': 1.
                                   viprRouterDisableReason 1.3.6.1.4.1.1751.2.18.24.1.1.12 integer read-only
This variable describes the reason why the Router in the unlocked-Disabled state. Enumeration: 'automatic': 3, 'none': 1, 'manual': 2.
                                   viprRouterRowStatus 1.3.6.1.4.1.1751.2.18.24.1.1.13 rowstatus read-write
row status
                           viprIntfConfigTable 1.3.6.1.4.1.1751.2.18.24.2 no-access
Table of Vipr Interface Config Information
                               viprIntfConfigEntry 1.3.6.1.4.1.1751.2.18.24.2.1 no-access
definition for VIPR interface attributes
                                   viprIntfId 1.3.6.1.4.1.1751.2.18.24.2.1.1 integer32 no-access
A unique Id for the Interface in a router instance
                                   viprIntfIPAddress 1.3.6.1.4.1.1751.2.18.24.2.1.2 ipaddress read-write
The IP address of the entrprise network to which the interface is attached to
                                   viprIntfIPNetMask 1.3.6.1.4.1.1751.2.18.24.2.1.3 ipaddress read-write
The IP Subnet Mask of the entrprise network to which the interface is attached to
                                   viprIntfAdminStatus 1.3.6.1.4.1.1751.2.18.24.2.1.4 integer read-write
This variable represents the various X.731 states the Interfce statemachine can take Administratively Enumeration: 'outOfService': 1, 'inService': 2.
                                   viprIntfOperStatus 1.3.6.1.4.1.1751.2.18.24.2.1.5 integer read-only
This variable represents the various X.731 states the Interfce statemachine can take operationally Enumeration: 'outOfService': 1, 'unlocked-Init': 3, 'unlocked-Disable': 4, 'locked-Shutting': 5, 'inService': 2.
                                   viprIntfInitTmr 1.3.6.1.4.1.1751.2.18.24.2.1.6 integer32 read-write
This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state.
                                   viprIntfDisabWarnTmr 1.3.6.1.4.1.1751.2.18.24.2.1.7 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state.
                                   viprIntfShutDwnWarnTmr 1.3.6.1.4.1.1751.2.18.24.2.1.8 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state.
                                   viprIntfDisableWarning 1.3.6.1.4.1.1751.2.18.24.2.1.9 integer read-write
This variable when disabled will mask all the Disable warning messages. Enumeration: 'disabled': 2, 'enabled': 1.
                                   viprIntfDisableReason 1.3.6.1.4.1.1751.2.18.24.2.1.10 integer read-only
This variable describes the reason why the Interface in the unlocked-Disabled state. Enumeration: 'none': 1, 'intfDisabled': 2, 'routDisabled': 3.
                                   viprIntfRipVersion 1.3.6.1.4.1.1751.2.18.24.2.1.11 integer read-write
This specifies the version of RIP that interface supports. Enumeration: 'version-2': 2, 'version-1': 1.
                                   viprIntfRipMode 1.3.6.1.4.1.1751.2.18.24.2.1.12 integer read-write
This specifies the mode in which RIP protocol runs. Enumeration: 'disabled': 1, 'active': 2, 'passive': 3.
                                   viprIntfRowStatus 1.3.6.1.4.1.1751.2.18.24.2.1.13 rowstatus read-write
row status
                                   viprIntfRipLineType 1.3.6.1.4.1.1751.2.18.24.2.1.14 integer read-write
This specifies the line type when the RIP version is 2. When the RIP version is 1, the RIP line type will be set to broadcast(1). Enumeration: 'broadcast': 1, 'multicast': 2.
                                   viprIntfAuthPasswd 1.3.6.1.4.1.1751.2.18.24.2.1.15 displaystring read-write
The authentication password for RIP version 2
                           viprSubChnlConfigTable 1.3.6.1.4.1.1751.2.18.24.3 no-access
Table of Vipr Sub Channel Config Information
                               viprSubChnlConfigEntry 1.3.6.1.4.1.1751.2.18.24.3.1 no-access
definition for VIPR sub channel attributes
                                   viprSubChnlId 1.3.6.1.4.1.1751.2.18.24.3.1.1 integer32 no-access
A unique Id for the sub channel in the interface
                                   viprSubChnlIntfIndex 1.3.6.1.4.1.1751.2.18.24.3.1.2 intfindex read-write
The Slot Port Channel to which the IP Packet to be forwarded when the TOS specified in the incoming IP packet is matched to the TosValue, TosMask pair
                                   viprSubChnlTrafficType 1.3.6.1.4.1.1751.2.18.24.3.1.3 integer read-write
The type of interface configured on the SSPPCCC, viprSubChnlIntfIndex Enumeration: 'bridge': 3, 'fR': 2, 'atm': 1, 'routing': 4, 'inband': 5.
                                   viprSubChnlLlcEncapType 1.3.6.1.4.1.1751.2.18.24.3.1.4 integer read-write
The encapsulation technique used in making IP packet to ATM cell Enumeration: 'vc': 1, 'llcSnap': 2.
                                   viprSubChnlMacEncapType 1.3.6.1.4.1.1751.2.18.24.3.1.5 integer read-write
The encapsulation technique used in making IP packet to ATM cell Enumeration: 'macHdr': 1, 'noMacHdr': 2.
                                   viprSubChnlTosFeature 1.3.6.1.4.1.1751.2.18.24.3.1.6 integer read-only
Allow the user to set the TOS values or not Enumeration: 'disabled': 1, 'enabled': 2.
                                   viprSubChnlTosValue 1.3.6.1.4.1.1751.2.18.24.3.1.7 integer read-only
The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP packets getting forwarded in this sub channel
                                   viprSubChnlTosMask 1.3.6.1.4.1.1751.2.18.24.3.1.8 integer read-only
The Type of Service mask
                                   viprSubChnlVpiDlci 1.3.6.1.4.1.1751.2.18.24.3.1.9 integer read-write
The VPI/DLCI value of the connection
                                   viprSubChnlVci 1.3.6.1.4.1.1751.2.18.24.3.1.10 integer read-write
The VCI value of the connection
                                   viprSubChnlSarType 1.3.6.1.4.1.1751.2.18.24.3.1.11 integer read-only
The SAR Type supported for the connection Enumeration: 'aal5': 1.
                                   viprSubChnlServiceType 1.3.6.1.4.1.1751.2.18.24.3.1.12 integer read-write
The Service types that are supported Enumeration: 'bronze': 3, 'silver': 2, 'gold': 1.
                                   viprSubChnlFwdErrCorrection 1.3.6.1.4.1.1751.2.18.24.3.1.13 integer read-write
The Forward error correction to be used Enumeration: 'none': 1, 'quarterRate': 3, 'eighthRate': 2, 'halfRate': 4, 'auto': 6, 'autoHiQ': 5, 'autoLoQ': 7.
                                   viprSubChnlInterworkingType 1.3.6.1.4.1.1751.2.18.24.3.1.14 integer read-write
The Encapsulation type used for Frame relay subchannels Enumeration: 'frf8': 1.
                                   viprSubChnlFrameSize 1.3.6.1.4.1.1751.2.18.24.3.1.15 integer32 read-write
The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI).
                                   viprSubChnlComBurstSize 1.3.6.1.4.1.1751.2.18.24.3.1.16 integer32 read-write
The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI).
                                   viprSubChnlExcessBurstSize 1.3.6.1.4.1.1751.2.18.24.3.1.17 integer32 read-write
The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI).
                                   viprSubChnlCommitedInfoRate 1.3.6.1.4.1.1751.2.18.24.3.1.18 integer32 read-write
The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into the frame relay UNI).
                                   viprSubChnlTimeInterval 1.3.6.1.4.1.1751.2.18.24.3.1.19 integer read-only
The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds.
                                   viprSubChnlAtmPeakCellRate 1.3.6.1.4.1.1751.2.18.24.3.1.20 integer32 read-write
Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   viprSubChnlAtmSustainedCellRate 1.3.6.1.4.1.1751.2.18.24.3.1.21 integer32 read-write
Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   viprSubChnlAtmMaxBurstSize 1.3.6.1.4.1.1751.2.18.24.3.1.22 integer32 read-write
Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms.
                                   viprSubChnlFrPeakCellRate 1.3.6.1.4.1.1751.2.18.24.3.1.23 integer32 read-only
Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   viprSubChnlFrSustainedCellRate 1.3.6.1.4.1.1751.2.18.24.3.1.24 integer32 read-only
Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms.
                                   viprSubChnlFrMaxBurstSize 1.3.6.1.4.1.1751.2.18.24.3.1.25 integer32 read-only
Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms.
                                   viprSubChnlFlowType 1.3.6.1.4.1.1751.2.18.24.3.1.26 integer read-write
The type of flow Enumeration: 'duplex': 1.
                                   viprSubChnlAdminStatus 1.3.6.1.4.1.1751.2.18.24.3.1.27 integer read-write
This variable represents the various X.731 states the Sub Channel state machine can take Administartively Enumeration: 'outOfService': 1, 'inService': 2.
                                   viprSubChnlOperStatus 1.3.6.1.4.1.1751.2.18.24.3.1.28 integer read-only
This variable represents the various X.731 states the Sub Channel state machine can take Operationally Enumeration: 'outOfService': 1, 'unlocked-Init': 3, 'unlocked-Disable': 4, 'locked-Shutting': 5, 'inService': 2.
                                   viprSubChnlInitTmr 1.3.6.1.4.1.1751.2.18.24.3.1.29 integer32 read-write
This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state.
                                   viprSubChnlDisabWarnTmr 1.3.6.1.4.1.1751.2.18.24.3.1.30 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state.
                                   viprSubChnlShutDwnWarnTmr 1.3.6.1.4.1.1751.2.18.24.3.1.31 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state.
                                   viprSubChnlDisableWarning 1.3.6.1.4.1.1751.2.18.24.3.1.32 integer read-write
This variable when disabled will mask all the Disable warning messages. Enumeration: 'disabled': 2, 'enabled': 1.
                                   viprSubChnlDisableReason 1.3.6.1.4.1.1751.2.18.24.3.1.33 integer read-only
This variable describes the reason why the SubChnl in the unlocked-Disabled state. Enumeration: 'none': 1, 'intfDisabled': 2, 'routDisabled': 3.
                                   viprSubChnlRowStatus 1.3.6.1.4.1.1751.2.18.24.3.1.34 rowstatus read-write
row status
                                   viprSubChnlImIpAddr 1.3.6.1.4.1.1751.2.18.24.3.1.35 ipaddress read-write
inband management IpAddr
                                   viprSubChnlImMask 1.3.6.1.4.1.1751.2.18.24.3.1.36 ipaddress read-write
inband management Mask
                                   viprSubChnlViB 1.3.6.1.4.1.1751.2.18.24.3.1.37 integer read-write
The viB value of the connection
                                   viprSubChnlVUNIB 1.3.6.1.4.1.1751.2.18.24.3.1.38 integer read-write
The VUNIB value of the connection
                                   viprSubChnlTrafficShaping 1.3.6.1.4.1.1751.2.18.24.3.1.39 integer read-write
Traffic Shaping Support in the A2B direction for outgoing ATM connections. Enumeration: 'disabled': 1, 'enabled': 2.
                                   viprSubChnlAtmOamStatus 1.3.6.1.4.1.1751.2.18.24.3.1.40 integer read-write
Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Enumeration: 'end-Pt': 2, 'unsupp': 1, 'end-Seg-Pt': 3.
                           viprRouteConfigTable 1.3.6.1.4.1.1751.2.18.24.4 no-access
Table of Vipr static route Config Information
                               viprRouteConfigEntry 1.3.6.1.4.1.1751.2.18.24.4.1 no-access
Definition for Vipr static route attributes
                                   viprRouteId 1.3.6.1.4.1.1751.2.18.24.4.1.1 integer32 no-access
The unique Id to the routing table entry
                                   viprRouteIPAddress 1.3.6.1.4.1.1751.2.18.24.4.1.2 ipaddress read-write
The IP address of the host/network in the route entry
                                   viprRouteIPNetMask 1.3.6.1.4.1.1751.2.18.24.4.1.3 ipaddress read-write
The IP Subnet Mask for the route entry to identify whether the route entry is a host or network
                                   viprRouteDestAddress 1.3.6.1.4.1.1751.2.18.24.4.1.4 ipaddress read-write
The IP address of the host/network in the route entry
                                   viprRouteGatewayAddress 1.3.6.1.4.1.1751.2.18.24.4.1.5 ipaddress read-write
The IP address of the Gateway
                                   viprRouteServiceType 1.3.6.1.4.1.1751.2.18.24.4.1.6 integer read-write
The Service types that are supported Enumeration: 'bronze': 3, 'silver': 2, 'gold': 1.
                                   viprRouteMetric 1.3.6.1.4.1.1751.2.18.24.4.1.7 integer32 read-write
A scalar value for user-supplied static route metric values.
                                   viprRouteAdminStatus 1.3.6.1.4.1.1751.2.18.24.4.1.8 integer read-write
This variable represents the various X.731 states the Route state machine can take Administratively Enumeration: 'outOfService': 1, 'inService': 2.
                                   viprRouteOperStatus 1.3.6.1.4.1.1751.2.18.24.4.1.9 integer read-only
This variable represents the various X.731 states the Route state machine can take Operationally Enumeration: 'outOfService': 1, 'unlocked-Init': 3, 'unlocked-Disable': 4, 'locked-Shutting': 5, 'inService': 2.
                                   viprRouteInitTmr 1.3.6.1.4.1.1751.2.18.24.4.1.10 integer32 read-write
This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state.
                                   viprRouteDisabWarnTmr 1.3.6.1.4.1.1751.2.18.24.4.1.11 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state.
                                   viprRouteShutDwnWarnTmr 1.3.6.1.4.1.1751.2.18.24.4.1.12 integer32 read-write
This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state.
                                   viprRouteDisableWarning 1.3.6.1.4.1.1751.2.18.24.4.1.13 integer read-write
This variable when disabled will mask all the Disable warning messages. Enumeration: 'disabled': 2, 'enabled': 1.
                                   viprRouteDisableReason 1.3.6.1.4.1.1751.2.18.24.4.1.14 integer read-only
This variable describes the reason why the Route in the unlocked-Disabled state. Enumeration: 'none': 1, 'intfDisabled': 2, 'routDisabled': 3.
                                   viprRouteRowStatus 1.3.6.1.4.1.1751.2.18.24.4.1.15 rowstatus read-write
row status
                                   viprRouteDestMask 1.3.6.1.4.1.1751.2.18.24.4.1.16 ipaddress read-write
The IP Mask of the host/network in the route entry
                           viprRoutingConfigTable 1.3.6.1.4.1.1751.2.18.24.5 no-access
Table of Vipr routes Config Information
                               viprRoutingConfigEntry 1.3.6.1.4.1.1751.2.18.24.5.1 no-access
Definition for Vipr route attributes
                                   viprRoutingCommand 1.3.6.1.4.1.1751.2.18.24.5.1.1 integer no-access
The Routing table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to reset the counter in I/O card Set to retrieve in order to get the entries Enumeration: 'start': 1, 'abort': 3, 'retrieve': 4, 'more': 2.
                                   viprRoutingIPAddress 1.3.6.1.4.1.1751.2.18.24.5.1.2 ipaddress read-only
The IP address of the host/network in the route entry
                                   viprRoutingIPNetMask 1.3.6.1.4.1.1751.2.18.24.5.1.3 ipaddress read-only
The IP Subnet Mask for the route entry to identify whether the route entry is a host or network
                                   viprRoutingDestAddress 1.3.6.1.4.1.1751.2.18.24.5.1.4 ipaddress read-only
The IP address of the host/network in the route entry
                                   viprRoutingGatewayAddress 1.3.6.1.4.1.1751.2.18.24.5.1.5 ipaddress read-only
The IP address of the Gateway
                                   viprRoutingServiceType 1.3.6.1.4.1.1751.2.18.24.5.1.6 integer read-only
The Service types that are supported Enumeration: 'bronze': 3, 'silver': 2, 'gold': 1.
                                   viprRoutingType 1.3.6.1.4.1.1751.2.18.24.5.1.7 integer read-only
Route types supported by the RS Card. Enumeration: 'stat': 1, 'intf': 4, 'ospf': 3, 'rip': 2.
                                   viprRoutingMetric 1.3.6.1.4.1.1751.2.18.24.5.1.8 integer32 read-only
The Path cost
                                   viprRoutingDestMask 1.3.6.1.4.1.1751.2.18.24.5.1.9 ipaddress read-only
The IP address Mask of the host/network in the route entry
                                   viprRoutingAge 1.3.6.1.4.1.1751.2.18.24.5.1.10 integer32 read-only
Age of the routing entry
                                   viprRoutingIndex 1.3.6.1.4.1.1751.2.18.24.5.1.11 integer32 no-access
Index to the routing entry
                           viprArpConfigTable 1.3.6.1.4.1.1751.2.18.24.6 no-access
Table of Vipr Arp Table Information
                               viprArpConfigEntry 1.3.6.1.4.1.1751.2.18.24.6.1 no-access
Definition for Vipr Arp Table attributes
                                   viprArpCommand 1.3.6.1.4.1.1751.2.18.24.6.1.1 integer no-access
The ARP table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to reset the counter in I/O card Set to retrieve in order to get the entries Enumeration: 'start': 1, 'abort': 3, 'retrieve': 4, 'more': 2.
                                   viprArpIPAddress 1.3.6.1.4.1.1751.2.18.24.6.1.2 ipaddress read-only
The IP address of the host/network
                                   viprArpHwAddress 1.3.6.1.4.1.1751.2.18.24.6.1.3 octet string read-only
The hardware address of the host/network
                                   viprArpEntryAge 1.3.6.1.4.1.1751.2.18.24.6.1.4 integer32 read-only
Age of cache entry.
                                   viprArpInterfaceIPAddress 1.3.6.1.4.1.1751.2.18.24.6.1.5 ipaddress read-only
The Interface IP address through which it is learned
                                   viprArpInterfaceIPMask 1.3.6.1.4.1.1751.2.18.24.6.1.6 ipaddress read-only
The Interface IP address Mask
                                   viprArpInterfaceServiceType 1.3.6.1.4.1.1751.2.18.24.6.1.7 integer read-only
The Service type of the interface through which the ARP table is learned Enumeration: 'bronze': 3, 'silver': 2, 'gold': 1.
                                   viprArpIndex 1.3.6.1.4.1.1751.2.18.24.6.1.8 integer32 no-access
The Index to the Arp table
                           viprPingConfigTable 1.3.6.1.4.1.1751.2.18.24.7 no-access
Table of Vipr Ping Table Information
                               viprPingConfigEntry 1.3.6.1.4.1.1751.2.18.24.7.1 no-access
Definition for Vipr Ping Table attributes
                                   ipAddr 1.3.6.1.4.1.1751.2.18.24.7.1.1 ipaddress no-access
The IP address of the host/network to be echoed
                                   pingStatus 1.3.6.1.4.1.1751.2.18.24.7.1.2 integer read-only
The response value - Alive/Not Alive Enumeration: 'not-Alive': 2, 'alive': 1.
                           viprRipConfigTable 1.3.6.1.4.1.1751.2.18.24.8 no-access
Table of Vipr Rip Update Interval for each card
                               viprRipConfigEntry 1.3.6.1.4.1.1751.2.18.24.8.1 no-access
Definition of Rip Update attributes
                                   viprRipUpdateInt 1.3.6.1.4.1.1751.2.18.24.8.1.1 integer read-write
This variable represents the Rip Update Interval used by the RIP protocol to transmit packets. The unit is in seconds. The default is 30 seconds and user can change it to 8 or 16 seconds for a route server card. The value will apply to all VPN's in a route server card. But different route server cards in different slots can have separate values for Rip Update Interval Enumeration: 'lowUpdateInt': 8, 'mediumUpdateInt': 16, 'normalUpdateInt': 30.
                     toneAnnceControl 1.3.6.1.4.1.1751.2.18.25
                           tasCmprsAnnceId 1.3.6.1.4.1.1751.2.18.25.31 integer read-write
Announcement ID for this announcement file to be compressed.
                           tasCmprsAnnceReplaceId 1.3.6.1.4.1.1751.2.18.25.32 integer read-write
Announcement ID of the announcement file to be replaced from the announcement table by this file.
                           tasCmprsAnnceFilename 1.3.6.1.4.1.1751.2.18.25.33 displaystring read-write
File name for this announcement which is to be compressed.
                           tasCmprsAnnceDescription 1.3.6.1.4.1.1751.2.18.25.34 displaystring read-write
Description for this announcement which is to to be compressed.
                           tasCmprsAnnceCmprsType 1.3.6.1.4.1.1751.2.18.25.35 integer read-write
The type of compression used for storing this announcement. Enumeration: 'compress16k': 3, 'compress8k': 2, 'uncompressed': 1, 'compress32k': 4.
                           tasCmprsAnnceType 1.3.6.1.4.1.1751.2.18.25.36 integer read-write
The type of this announcement. Enumeration: 'musicVoice': 5, 'music': 4, 'userTones': 3, 'toneVoice': 2, 'toneMusic': 6, 'voice': 1.
                           tasCmprsAnnceIntfIndex 1.3.6.1.4.1.1751.2.18.25.37 intfindex read-write
Interface index in SSPPCCC format of TASM card on which this announcement is to be compressed.
                           tasCmprsAction 1.3.6.1.4.1.1751.2.18.25.38 integer read-write
Action to be performed on this announcement. Enumeration: 'compress': 1, 'store': 3, 'delete': 2.
                           tasTstAnnceId 1.3.6.1.4.1.1751.2.18.25.39 integer read-write
Announcement ID to be played for testing.
                           tasTstAnnceIntfIndex 1.3.6.1.4.1.1751.2.18.25.40 intfindex read-write
Interface index in SSPPCCC format of CE card on which this announcement is to be played for testing.
                           tasTstAnnceLawType 1.3.6.1.4.1.1751.2.18.25.41 integer read-write
The type of CE card towards which this announcement is to be played. A-Law is for E1 and U-Law is for DS1 Enumeration: 'a-Law': 1, 'u-Law': 2.
                           tasTstAnnceAction 1.3.6.1.4.1.1751.2.18.25.42 integer read-write
Action to be performed on this announcement for testing. Enumeration: 'playAbort': 3, 'playStop': 2, 'playStart': 1.
                           tasTstLineId 1.3.6.1.4.1.1751.2.18.25.43 integer32 read-write
Test ID to be started for line testing.
                           tasTstLineIntfIndex 1.3.6.1.4.1.1751.2.18.25.44 intfindex read-write
Interface index in SSPPCCC format of CE card on which this test is to be initiated.
                           tasTstLineAction 1.3.6.1.4.1.1751.2.18.25.45 integer read-write
Test action to be performed. Enumeration: 'tstStart': 1, 'tstAbort': 3, 'tstStop': 2.
                           tasMemIntfIndex 1.3.6.1.4.1.1751.2.18.25.46 intfindex read-write
Interface index in SSPPCCC format of TASM card on which the memory is to be initialised.
                           tasMemAction 1.3.6.1.4.1.1751.2.18.25.47 integer read-write
Test action to be performed. Enumeration: 're-initialize': 1.
                           toneAnnceIpAddress 1.3.6.1.4.1.1751.2.18.25.48 ipaddress read-write
IP Address for announcement ftp server.
                           toneAnnceAccountName 1.3.6.1.4.1.1751.2.18.25.49 displaystring read-write
ftp account name for access to announcement ftp server.
                           toneAnnceAccountPassword 1.3.6.1.4.1.1751.2.18.25.50 displaystring read-write
ftp account password for access to announcement ftp server.
                           toneAnnceSourceFile 1.3.6.1.4.1.1751.2.18.25.51 displaystring read-write
announcement file with complete path on the ftp server
                           toneAnnceDestinationFile 1.3.6.1.4.1.1751.2.18.25.52 displaystring read-write
The announcementSourceFile will be renamed with MS DOS file format and placed in the /scsi/announce directory on the disk.
                           toneAnnceFtpStatus 1.3.6.1.4.1.1751.2.18.25.53 integer read-only
Current status of the ftp announcement download. Status of the software announcement. noActivity is the initial start state from boot-up. working is set while ftp'ing the announcement. The final state is one of doneSuccessfully, doneWithError, or aborted, all self-explanatory. It will stay in this state until re-boot or starting an announcement. If the state is doneWithError then announcementSwErrorStatus will be set to reflect the type of error. Enumeration: 'noActivity': 1, 'doneWithError': 4, 'aborted': 5, 'working': 2, 'doneSuccessfully': 3.
                           toneAnnceFtpErrorStatus 1.3.6.1.4.1.1751.2.18.25.54 integer read-only
The result of the finish of the ftp software announcement download. Set to a value 3-21 if announcementSwCopyStatus is doneWithError. Set to none if announcementFtpCopyStatus is doneSuccessfully. Set to userAbort if announcementSwCopyStatus is aborted. Enumeration: 'unableToWriteFile': 13, 'none': 1, 'unableToSpawnTask': 15, 'statFails': 17, 'unableToOpenFile': 11, 'unableToCompleteFtp': 14, 'diskSpaceUsageExceed': 10, 'dstFileNameAlreadyExist': 8, 'unableToOpenScsiAnncDir': 16, 'tooManyAnnouncementNow': 9, 'invalidAccountPassword': 5, 'invalidDstFileNameFormat': 7, 'invalidSourceFile': 6, 'userAbort': 2, 'invalidAccountName': 4, 'invalidIpAddress': 3, 'unableToMakeFtpConnection': 12.
                           toneAnnceFtpAction 1.3.6.1.4.1.1751.2.18.25.55 integer read-write
start ftp announcement files. When announcementFtpCopyStatus is working, the start request will be ignored. Abort will have effect only when announcementFtpCopystatus is working. Enumeration: 'start': 1, 'abort': 2.
                     gr303Config 1.3.6.1.4.1.1751.2.18.26
                           gr303IgConfig 1.3.6.1.4.1.1751.2.18.26.1
                               gr303IgConfigTable 1.3.6.1.4.1.1751.2.18.26.1.1 no-access
Table of GR303 group configuration
                                   gr303IgConfigEntry 1.3.6.1.4.1.1751.2.18.26.1.1.1 no-access
Row definition for GR303 group configuration
                                       gr303IgId 1.3.6.1.4.1.1751.2.18.26.1.1.1.1 integer no-access
This is used as an index into GR303IG table which recognizes GR303 Interface Group
                                       gr303IgRowStatus 1.3.6.1.4.1.1751.2.18.26.1.1.1.2 rowstatus read-write
GR303IG config entry row status
                                       gr303IgAdminStatus 1.3.6.1.4.1.1751.2.18.26.1.1.1.3 integer read-write
Administrative status of the GR303IG Enumeration: 'outOfService': 2, 'inService': 1.
                                       gr303IgPrimaryTMCChanIntfId 1.3.6.1.4.1.1751.2.18.26.1.1.1.4 intfindex read-write
Primary TMC channel Interface Id in SSPPCCC format
                                       gr303IgPrimaryEOCChanIntfId 1.3.6.1.4.1.1751.2.18.26.1.1.1.5 intfindex read-write
Primary EOC channel Interface Id in SSPPCCC format
                                       gr303IgBackupTMCChanIntfId 1.3.6.1.4.1.1751.2.18.26.1.1.1.6 intfindex read-write
Backup TMC channel Interface Id in SSPPCCC format
                                       gr303IgBackupEOCChanIntfId 1.3.6.1.4.1.1751.2.18.26.1.1.1.7 intfindex read-write
Backup EOC channel Interface Id in SSPPCCC format
                                       gr303IgPrimaryTMCStatus 1.3.6.1.4.1.1751.2.18.26.1.1.1.8 integer read-only
Primary TMC channel Status Enumeration: 'standby-OutOfService': 1, 'active-OutOfService': 3, 'active-InService': 4, 'standby-InService': 2.
                                       gr303IgPrimaryEOCStatus 1.3.6.1.4.1.1751.2.18.26.1.1.1.9 integer read-only
Primary EOC channel Status Enumeration: 'standby-OutOfService': 1, 'active-OutOfService': 3, 'active-InService': 4, 'standby-InService': 2.
                                       gr303IgBackupTMCStatus 1.3.6.1.4.1.1751.2.18.26.1.1.1.10 integer read-only
Backup TMC channel Status.Value null(5) Indicates that the Backup TMC has not been configured. Enumeration: 'standby-OutOfService': 1, 'active-OutOfService': 3, 'active-InService': 4, 'null': 5, 'standby-InService': 2.
                                       gr303IgBackupEOCStatus 1.3.6.1.4.1.1751.2.18.26.1.1.1.11 integer read-only
Backup EOC channel Status.Value null(5) Indicates that the Backup EOC has not been configured. Enumeration: 'standby-OutOfService': 1, 'active-OutOfService': 3, 'active-InService': 4, 'null': 5, 'standby-InService': 2.
                                       gr303IgTMCProtSwitchProvState 1.3.6.1.4.1.1751.2.18.26.1.1.1.12 integer read-write
Lock/Unlock the protection switch Enumeration: 'pps-inhibit': 1, 'pps-enable': 2.
                                       gr303IgEOCProtSwitchProvState 1.3.6.1.4.1.1751.2.18.26.1.1.1.13 integer read-write
Lock/Unlock the protection switch Enumeration: 'pps-inhibit': 1, 'pps-enable': 2.
                                       gr303IgTMCProtSwitchCommand 1.3.6.1.4.1.1751.2.18.26.1.1.1.14 integer read-write
User command to do path protection switch Enumeration: 'forcedSwitchToPrimary': 5, 'normalSwitchToBackup': 2, 'normalSwitchToPrimary': 3, 'forcedSwitchToBackup': 4, 'noAction': 1.
                                       gr303IgEOCProtSwitchCommand 1.3.6.1.4.1.1751.2.18.26.1.1.1.15 integer read-write
User command to do path protection switch Enumeration: 'forcedSwitchToPrimary': 5, 'normalSwitchToBackup': 2, 'normalSwitchToPrimary': 3, 'forcedSwitchToBackup': 4, 'noAction': 1.
                                       gr303IgLocalDigitalSwitchType 1.3.6.1.4.1.1751.2.18.26.1.1.1.16 integer read-write
LDS (IDT) type Enumeration: 'nortel-dms': 2, 'lucent-5ess': 1.
                                       gr303IgLocalDigitalSwitchVersion 1.3.6.1.4.1.1751.2.18.26.1.1.1.17 integer read-write
LDS (IDT)Version Enumeration: 'lucent-5ess-version-1': 1, 'nortel-dms-version-1': 2.
                               gr303IgIntfConfigTable 1.3.6.1.4.1.1751.2.18.26.1.2 no-access
Table of interface attributes in an GR303IG
                                   gr303IgIntfConfigEntry 1.3.6.1.4.1.1751.2.18.26.1.2.1 no-access
Row definition for GR303 Access Arrangement Interface configuration
                                       gr303IntfIgId 1.3.6.1.4.1.1751.2.18.26.1.2.1.1 integer no-access
This is used as an index into GR303Ig table which recognizes GR303 Interface Group. This is used as a first index into this interface table.
                                       gr303IgIntfId 1.3.6.1.4.1.1751.2.18.26.1.2.1.2 integer no-access
This is used as an index into IG interface table which recognizes GR303 Ig interfaces. This is used as a second index into this table
                                       gr303IgIntfPhysId 1.3.6.1.4.1.1751.2.18.26.1.2.1.3 integer32 read-write
Interface's Physical ID (SSPPCCC)
                                       gr303IgIntfNetId 1.3.6.1.4.1.1751.2.18.26.1.2.1.4 integer32 read-only
gr303Ig Interface (DS1) Net Id assigned by the network
                                       gr303IgIntfRowStatus 1.3.6.1.4.1.1751.2.18.26.1.2.1.5 rowstatus read-write
GR303IG interface entry row status - row status can not be made active until all the values are set
                               gr303LapdConfigTable 1.3.6.1.4.1.1751.2.18.26.1.4 no-access
Table of LAPD attributes in an GR303IG
                                   gr303LapdConfigEntry 1.3.6.1.4.1.1751.2.18.26.1.4.1 no-access
Row definition for LAPD attributes in a GR303IG
                                       gr303LapdIgId 1.3.6.1.4.1.1751.2.18.26.1.4.1.1 integer no-access
GR303IG Number index which recognizes GR303 Interface group
                                       gr303T200 1.3.6.1.4.1.1751.2.18.26.1.4.1.2 integer read-write
value of Lapd T200 timer in miliseconds in step size of 50 ms
                                       gr303T203 1.3.6.1.4.1.1751.2.18.26.1.4.1.3 integer read-write
value of Lapd T203 timer in seconds
                                       gr303N200 1.3.6.1.4.1.1751.2.18.26.1.4.1.4 integer read-write
Maximum number of retransmissions
                                       gr303K 1.3.6.1.4.1.1751.2.18.26.1.4.1.5 integer read-write
Maximum number of outstanding I frames - Lapd - window size.
                               gr303TMCConfigTable 1.3.6.1.4.1.1751.2.18.26.1.5 no-access
Table of Layer 3 attributes in an GR303IG
                                   gr303TMCConfigEntry 1.3.6.1.4.1.1751.2.18.26.1.5.1 no-access
Row definition for GR303 Access Arrangement Layer3 parameters configuration
                                       gr303TMCIgId 1.3.6.1.4.1.1751.2.18.26.1.5.1.1 integer no-access
GR303IG Number index which recognizes GR303 Interface group
                                       gr303TMCT303 1.3.6.1.4.1.1751.2.18.26.1.5.1.2 integer read-write
value of TMC T303 timer in miliseconds with a step size of 500 ms
                                       gr303TMCT396 1.3.6.1.4.1.1751.2.18.26.1.5.1.3 integer read-write
value of TMC T396 timer in miliseconds with a step size of 1000 ms
                     gr303Stats 1.3.6.1.4.1.1751.2.18.27
                           gr303IgStats 1.3.6.1.4.1.1751.2.18.27.1
                               gr303IgStatsTable 1.3.6.1.4.1.1751.2.18.27.1.1 no-access
Table of GR303 GR303IG based stats attributes
                                   gr303IgStatsEntry 1.3.6.1.4.1.1751.2.18.27.1.1.1 no-access
Row definition for GR303 GR303IG based stats
                                       gr303IgStatsIgId 1.3.6.1.4.1.1751.2.18.27.1.1.1.1 integer no-access
This is used as an index into GR303 Ig table which recognizes GR303 Interface Group Interface group
                                       gr303IgStatsCurrentInCalls 1.3.6.1.4.1.1751.2.18.27.1.1.1.2 integer32 read-only
Total number of Currently established incoming calls
                                       gr303IgStatsCurrentOutCalls 1.3.6.1.4.1.1751.2.18.27.1.1.1.3 integer32 read-only
Total number of Currently established outgoing calls
                                       gr303IgStatsOutCallSuccessful 1.3.6.1.4.1.1751.2.18.27.1.1.1.4 integer32 read-only
Total number successful outgoing calls
                                       gr303IgStatsOutCallFailed 1.3.6.1.4.1.1751.2.18.27.1.1.1.5 integer32 read-only
Total number of Failed outgoing calls
                                       gr303IgStatsInCallSuccessful 1.3.6.1.4.1.1751.2.18.27.1.1.1.6 integer32 read-only
Total number successful incoming calls
                                       gr303IgStatsInCallFailed 1.3.6.1.4.1.1751.2.18.27.1.1.1.7 integer32 read-only
Total number of Failed incoming calls
                                       gr303IgStatsReset 1.3.6.1.4.1.1751.2.18.27.1.1.1.8 integer read-write
gr303Ig reset statistics button Enumeration: 'reset': 1.
                     atmTrunkingMIBObjects 1.3.6.1.4.1.1751.2.18.28
                           atmTrunkingIWFBaseGroup 1.3.6.1.4.1.1751.2.18.28.1
                               atmTrunkingIWFIdentifier 1.3.6.1.4.1.1751.2.18.28.1.1 integer32 read-write
IWF ID for the local endpoint
                               atmTrunkingIWFLocalAddress 1.3.6.1.4.1.1751.2.18.28.1.2 octet string read-write
IWF ATM address for the local endpoint
                               atmTrunkingIWFMaxRemoteIWF 1.3.6.1.4.1.1751.2.18.28.1.3 integer32 read-write
Maximum remote IWF that can connect to this endpoint
                               atmTrunkingIWFAdminStatus 1.3.6.1.4.1.1751.2.18.28.1.4 integer read-write
Indicates whether the Local IWF is active or not Enumeration: 'down': 2, 'up': 1, 'delete': 3.
                           atmTrunkingRemoteIWFTable 1.3.6.1.4.1.1751.2.18.28.2 no-access
Remote IWF table
                               atmTrunkingRemoteIWFEntry 1.3.6.1.4.1.1751.2.18.28.2.1 no-access
Entry in atmTrunkingRemoteIWFTable
                                   atmTrunkingRemoteIWFIdentifier 1.3.6.1.4.1.1751.2.18.28.2.1.1 integer32 no-access
IWF ID for the remote IWF
                                   atmTrunkingRemoteIWFAddress 1.3.6.1.4.1.1751.2.18.28.2.1.2 octet string read-only
IWF ATM address for the remote IWF
                                   atmTrunkingRemoteIWFTrnkMode 1.3.6.1.4.1.1751.2.18.28.2.1.3 integer read-only
Maximum remote IWF that can connect to this endpoint Enumeration: 'non-switched': 2, 'switched': 1.
                                   atmTrunkingRemoteIWFAdminStatus 1.3.6.1.4.1.1751.2.18.28.2.1.4 integer read-only
Indicates whether the Local IWF is active or not Enumeration: 'down': 2, 'up': 1.
                                   atmTrunkingRemoteIWFRowStatus 1.3.6.1.4.1.1751.2.18.28.2.1.5 rowstatus read-only
Maximum remote IWF that can connect to this endpoint
                           atmTrunkingSigVccTable 1.3.6.1.4.1.1751.2.18.28.3 no-access
Table of iwf signaling vcc configuration entities
                               atmTrunkingSigVccEntry 1.3.6.1.4.1.1751.2.18.28.3.1 no-access
Entry in atmTrunkingSigVccTable
                                   atmTrunkingSigVccRmtIWFIdentifier 1.3.6.1.4.1.1751.2.18.28.3.1.1 integer32 no-access
IWF ID for the remote IWF
                                   atmTrunkingSigVccIdentifier 1.3.6.1.4.1.1751.2.18.28.3.1.2 integer no-access
Vcc ID assigned by the owner of this signaling Vcc
                                   atmTrunkingSigVccOutgoingIfIndex 1.3.6.1.4.1.1751.2.18.28.3.1.3 intfindex read-only
Intf index of the outgoing interface,readonly for SVC/SPVC
                                   atmTrunkingSigVccOutgoingVpi 1.3.6.1.4.1.1751.2.18.28.3.1.4 integer read-only
VPI used at the outgoing interface, readonly for SVC/SPVC
                                   atmTrunkingSigVccOutgoingVci 1.3.6.1.4.1.1751.2.18.28.3.1.5 integer read-only
VCI used at the outgoing interface, readonly for SVC/SPVC
                                   atmTrunkingSigVccOwner 1.3.6.1.4.1.1751.2.18.28.3.1.6 integer read-only
Indicates who is the owner of the Sig VCC Enumeration: 'remote': 2, 'local': 1.
                                   atmTrunkingSigVccInactiveTimer 1.3.6.1.4.1.1751.2.18.28.3.1.7 integer32 read-only
Inactive time period on which to clear the call
                                   atmTrunkingSigVccType 1.3.6.1.4.1.1751.2.18.28.3.1.8 integer read-only
Indicates if the SigVcc should be setup as PVC/SPVC/SVC Enumeration: 'spvc': 2, 'pvc': 1, 'svc': 3.
                                   atmTrunkingSigVccSignaling 1.3.6.1.4.1.1751.2.18.28.3.1.9 integer read-only
Indicates the signalling protocol used between the IWFs Enumeration: 'dpnss': 3, 'pss1': 1, 'other': 4, 'dss1': 2.
                                   atmTrunkingSigVccFwPcr01 1.3.6.1.4.1.1751.2.18.28.3.1.10 integer32 read-only
Forward PCR for the call
                                   atmTrunkingSigVccBwPcr01 1.3.6.1.4.1.1751.2.18.28.3.1.11 integer32 read-only
Backward PCR for the call
                                   atmTrunkingSigVccFwScr01 1.3.6.1.4.1.1751.2.18.28.3.1.12 integer32 read-only
Forward SCR for the call
                                   atmTrunkingSigVccBwScr01 1.3.6.1.4.1.1751.2.18.28.3.1.13 integer32 read-only
Backward SCR for the call
                                   atmTrunkingSigVccFwMbs01 1.3.6.1.4.1.1751.2.18.28.3.1.14 integer32 read-only
Forward MBS for the call
                                   atmTrunkingSigVccBwMbs01 1.3.6.1.4.1.1751.2.18.28.3.1.15 integer32 read-only
Backward MBS for the call
                                   atmTrunkingSigVccMaxAal2Vcc 1.3.6.1.4.1.1751.2.18.28.3.1.16 integer32 read-only
Maximum number of bearer VCCs controlled by this SigVcc
                                   atmTrunkingSigVccActiveAal2Vcc 1.3.6.1.4.1.1751.2.18.28.3.1.17 integer32 read-only
Number of active bearer VCCs controlled by this SigVcc
                                   atmTrunkingSigVccOperStatus 1.3.6.1.4.1.1751.2.18.28.3.1.18 integer read-only
Indicates whether the Local IWF is active or not Enumeration: 'outOfService': 2, 'init': 3, 'release': 6, 'idle': 1, 'connecting': 4, 'active': 5.
                                   atmTrunkingSigVccRowStatus 1.3.6.1.4.1.1751.2.18.28.3.1.19 rowstatus read-only
Row status
                                   atmTrunkingSigVccViB 1.3.6.1.4.1.1751.2.18.28.3.1.20 integer read-only
VI to associate the Egress part of A2B connection
                                   atmTrunkingSigVccVUNIB 1.3.6.1.4.1.1751.2.18.28.3.1.21 integer read-only
VUNI associated the Egress part of A2B connection
                                   atmTrunkingSigVccRetryTimer 1.3.6.1.4.1.1751.2.18.28.3.1.22 integer32 read-only
the time(seconds) to wait before attempting to establish the ATM Trunking Signalling VCC SPVC after previous failed call attempt. 0 indicates retries will be attempted immedi ately
                                   atmTrunkingSigVccRetryLimit 1.3.6.1.4.1.1751.2.18.28.3.1.23 integer32 read-only
ATM Trunking Signalling VCC SPVC Retry Limit. 0 indicates unlimited
                                   atmTrunkingSigVccRestart 1.3.6.1.4.1.1751.2.18.28.3.1.24 integer read-write
The active ATM Trunking SPVC is released, if necessary, and a new setup procedure is begun if restart, otherwise, noop. Enumeration: 'noop': 2, 'restart': 1.
                                   atmTrunkingSigVccPriority 1.3.6.1.4.1.1751.2.18.28.3.1.25 integer read-write
Priority of TrunkingSigVcc - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                                   atmTrunkingSigVccRetryCounter 1.3.6.1.4.1.1751.2.18.28.3.1.26 integer32 read-only
Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SigVcc SPVC is restarted.
                           atmTrunkingBrVccConfigTable 1.3.6.1.4.1.1751.2.18.28.4 no-access
Table of iwf aal2 bearer vcci configuration entities
                               atmTrunkingBrVccConfigEntry 1.3.6.1.4.1.1751.2.18.28.4.1 no-access
Row definition for iwf aal2 vcci configuration
                                   atmTrunkingBrVccRmtIWFId 1.3.6.1.4.1.1751.2.18.28.4.1.1 integer32 no-access
IWF ID for the remote IWF
                                   atmTrunkingBrVccSigVccId 1.3.6.1.4.1.1751.2.18.28.4.1.2 integer read-only
Signalling Vcc associated with this Br Vcc
                                   atmTrunkingBrVccId 1.3.6.1.4.1.1751.2.18.28.4.1.3 integer no-access
Id of the AAL2 Bear Vcc
                                   atmTrunkingBrVccIf 1.3.6.1.4.1.1751.2.18.28.4.1.4 intfindex read-only
Intf index of the outgoing interface, readonly for SVC/SPVC
                                   atmTrunkingBrVccVpi 1.3.6.1.4.1.1751.2.18.28.4.1.5 integer read-only
VPI value of this VCC connection. Valid range is a number between 0 and 4095.
                                   atmTrunkingBrVccVci 1.3.6.1.4.1.1751.2.18.28.4.1.6 integer read-only
VCI value of this VCC connection. Valid range is a number between 0 and 65535.
                                   atmTrunkingBrVccViB 1.3.6.1.4.1.1751.2.18.28.4.1.7 integer read-only
VI to associate the Egress part of A2B connection
                                   atmTrunkingBrVccVUNIB 1.3.6.1.4.1.1751.2.18.28.4.1.8 integer read-only
VUNI associated the Egress part of A2B connection
                                   atmTrunkingBrVccServiceType 1.3.6.1.4.1.1751.2.18.28.4.1.9 integer read-only
service type Enumeration: 'vbr-rt1': 9, 'vbr-rt2': 8, 'ubr': 5, 'cbr-1': 1, 'cbr-3': 3, 'cbr-2': 2, 'cbr-4': 4, 'vbr-nrt2': 6, 'vbr-nrt1': 7, 'vbr-express': 10.
                                   atmTrunkingBrVccSarType 1.3.6.1.4.1.1751.2.18.28.4.1.10 integer read-only
sar type Enumeration: 'aal2': 2, 'aal1': 1.
                                   atmTrunkingBrVccOwner 1.3.6.1.4.1.1751.2.18.28.4.1.11 integer read-only
The owner of this Vcc Enumeration: 'remote': 2, 'local': 1.
                                   atmTrunkingBrVccOperStatus 1.3.6.1.4.1.1751.2.18.28.4.1.12 integer read-only
The Operational Status of this Bearer Vcc Enumeration: 'outOfService': 2, 'active': 4, 'idle': 1, 'init': 3, 'release': 5.
                                   atmTrunkingBrVccFwAtmPcr01 1.3.6.1.4.1.1751.2.18.28.4.1.13 integer32 read-only
Forward pcr (0+1)
                                   atmTrunkingBrVccBwAtmPcr01 1.3.6.1.4.1.1751.2.18.28.4.1.14 integer32 read-only
Backward pcr (0+1)
                                   atmTrunkingBrVccFwAtmScr01 1.3.6.1.4.1.1751.2.18.28.4.1.15 integer32 read-only
Forward scr (0+1)
                                   atmTrunkingBrVccBwAtmScr01 1.3.6.1.4.1.1751.2.18.28.4.1.16 integer32 read-only
Backward scr (0+1)
                                   atmTrunkingBrVccFwAtmMbs01 1.3.6.1.4.1.1751.2.18.28.4.1.17 integer32 read-only
Forward Mbs (0+1)
                                   atmTrunkingBrVccBwAtmMbs01 1.3.6.1.4.1.1751.2.18.28.4.1.18 integer32 read-only
Backward Mbs (0+1)
                                   atmTrunkingBrVccConnType 1.3.6.1.4.1.1751.2.18.28.4.1.19 integer read-only
connection type Enumeration: 'spvc': 2, 'pvc': 3, 'svc': 1.
                                   atmTrunkingBrVccActiveChanCnt 1.3.6.1.4.1.1751.2.18.28.4.1.20 integer32 read-only
Number of currently active channels in this Vcc
                                   atmTrunkingBrVccMaxAal2ChanId 1.3.6.1.4.1.1751.2.18.28.4.1.21 integer read-only
Max Id of channels supported within this br vcc
                                   atmTrunkingBrVccCircuitModeDataSupp 1.3.6.1.4.1.1751.2.18.28.4.1.22 integer read-only
Circuit mode data Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccFrameModeSupp 1.3.6.1.4.1.1751.2.18.28.4.1.23 integer read-only
Frame mode data Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccFaxModSupp 1.3.6.1.4.1.1751.2.18.28.4.1.24 integer read-only
FAX Demodulation Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccCASPktXportSupp 1.3.6.1.4.1.1751.2.18.28.4.1.25 integer read-only
Channel Associated Signaling Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccDTMFPktXportSupp 1.3.6.1.4.1.1751.2.18.28.4.1.26 integer read-only
DTMF Dialed Digits Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccMFR1PktXportSupp 1.3.6.1.4.1.1751.2.18.28.4.1.27 integer read-only
MF-R1 Dialed Digits Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccMFR2PktXportSupp 1.3.6.1.4.1.1751.2.18.28.4.1.28 integer read-only
MF-R2 Dialed Digits Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccPCMEncoding 1.3.6.1.4.1.1751.2.18.28.4.1.29 integer read-only
DTMF Dialed Digits Enumeration: 'none': 1, 'a-law': 2, 'u-law': 3.
                                   atmTrunkingBrVccMaxFrameLength 1.3.6.1.4.1.1751.2.18.28.4.1.30 integer read-only
Maximum length of frame mode data
                                   atmTrunkingBrVccIdleChannSuprSupp 1.3.6.1.4.1.1751.2.18.28.4.1.31 integer read-only
Idle Channel Supression Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccSilenceDetSupp 1.3.6.1.4.1.1751.2.18.28.4.1.32 integer read-only
Silence Detection Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccCompressionSpec 1.3.6.1.4.1.1751.2.18.28.4.1.33 integer read-only
Compression Type Enumeration: 'none': 1, 'g729a-8K': 6, 'g726-40K': 5, 'g726-32K': 4, 'g726-16K': 2, 'g726-24K': 3.
                                   atmTrunkingBrVccAudioProfileSource 1.3.6.1.4.1.1751.2.18.28.4.1.34 integer read-only
Profile Source Enumeration: 'other': 2, 'itu-t': 1.
                                   atmTrunkingBrVccAudioProfileId 1.3.6.1.4.1.1751.2.18.28.4.1.35 integer read-only
Profile ID
                                   atmTrunkingBrVccAvailBw 1.3.6.1.4.1.1751.2.18.28.4.1.36 integer32 read-only
Available Bandwidth left in this Vcc
                                   atmTrunkingBrVccRowStatus 1.3.6.1.4.1.1751.2.18.28.4.1.37 rowstatus read-only
Row status
                                   atmTrunkingBrVccGr303Supp 1.3.6.1.4.1.1751.2.18.28.4.1.38 integer read-only
GR303 Support Enumeration: 'enable': 2, 'disable': 1.
                                   atmTrunkingBrVccOamStatus 1.3.6.1.4.1.1751.2.18.28.4.1.39 integer read-write
Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it will respond to AIS/RDI. Enumeration: 'end-Pt': 2, 'unsupp': 1.
                                   atmTrunkingBrVccInactiveTimer 1.3.6.1.4.1.1751.2.18.28.4.1.40 integer32 read-only
The time(in seconds) to wait before releasing the ATM Trunking Bearer VCC SVC after all narrow band calls are dropped
                                   atmTrunkingBrVccRetryTimer 1.3.6.1.4.1.1751.2.18.28.4.1.41 integer32 read-only
the time(seconds) to wait before attempting to establish the ATM Trunking Bearer VCC SPVC after previous failed call attempt. 0 indicates retries will be attempted immediately
                                   atmTrunkingBrVccRetryLimit 1.3.6.1.4.1.1751.2.18.28.4.1.42 integer32 read-only
ATM Trunking Bearer VCC SPVC Retry Limit. 0 indicates unlimited
                                   atmTrunkingBrVccRestart 1.3.6.1.4.1.1751.2.18.28.4.1.43 integer read-write
The active ATM Trunking BrVcc SPVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. Enumeration: 'noop': 2, 'restart': 1.
                                   atmTrunkingBrVccCuTimer 1.3.6.1.4.1.1751.2.18.28.4.1.44 integer read-write
CuTimer represents combined use timer, is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out.
                                   atmTrunkingBrVccPriority 1.3.6.1.4.1.1751.2.18.28.4.1.45 integer read-write
Priority of TrunkingBrVcc - priority-1 being highest priority . Enumeration: 'priority-4': 4, 'priority-1': 1, 'priority-3': 3, 'priority-2': 2.
                                   atmTrunkingBrVccRetryCounter 1.3.6.1.4.1.1751.2.18.28.4.1.46 integer32 read-only
Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the BrVcc SPVC is restarted.
                           atmTrunkingDataChannelConfigTable 1.3.6.1.4.1.1751.2.18.28.5 no-access
Table of iwf aal2 data channel configuration entities
                               atmTrunkingDataChannelConfigEntry 1.3.6.1.4.1.1751.2.18.28.5.1 no-access
Row definition for iwf aal2 data channel configuration
                                   atmTrunkingDataChannelRmtIWFId 1.3.6.1.4.1.1751.2.18.28.5.1.1 integer32 no-access
IWF ID for the remote IWF
                                   atmTrunkingDataChannelSigVccId 1.3.6.1.4.1.1751.2.18.28.5.1.2 integer read-only
Vcc ID assigned by the owner of this signaling Vcc
                                   atmTrunkingDataChannelBrVccId 1.3.6.1.4.1.1751.2.18.28.5.1.3 integer no-access
Id of the AAL2 Bear Vcc
                                   atmTrunkingDataChannelId 1.3.6.1.4.1.1751.2.18.28.5.1.4 integer no-access
The AAL2 Channel Id of this channel
                                   atmTrunkingDataChanOperStatus 1.3.6.1.4.1.1751.2.18.28.5.1.5 integer read-only
Operational Status of this channel Enumeration: 'active': 2, 'idle': 1.
                                   atmTrunkingDataChanOwner 1.3.6.1.4.1.1751.2.18.28.5.1.6 integer read-only
The owner of this channel Enumeration: 'remote': 2, 'local': 1.
                                   atmTrunkingDataChanNBIntf 1.3.6.1.4.1.1751.2.18.28.5.1.7 intfindex read-only
The index of narrowband interface this channel is mapped to
                     protectionGroup 1.3.6.1.4.1.1751.2.18.29
                           protectionGroupTable 1.3.6.1.4.1.1751.2.18.29.1 no-access
Table of interface protection group attributes
                               protectionGroupEntry 1.3.6.1.4.1.1751.2.18.29.1.1 no-access
Defines one interface protection group
                                   pgtGroupId 1.3.6.1.4.1.1751.2.18.29.1.1.1 integer32 no-access
a user selected logical number representing a protection group uniquely within a PSAX
                                   pgtSwitchoverMethod 1.3.6.1.4.1.1751.2.18.29.1.1.2 integer read-write
switchover method to switch traffic from failed primary interface to available standby interface. In auto method, PSAX automatically switches the traffic without user intervention. In manual method, a failed primary does not switch traffic and gives control to user to do so. Enumeration: 'auto': 1, 'manual': 2.
                                   pgtSwitchbackMethod 1.3.6.1.4.1.1751.2.18.29.1.1.3 integer read-write
switchback method to switch traffic from a standby to its corresponding recovered primary interface. In auto method, PSAX automatically switches the traffic without user intervention. In manual method, standby does not switch traffic and gives control to user to do so. Enumeration: 'auto': 1, 'manual': 2.
                                   pgtStandbySelection 1.3.6.1.4.1.1751.2.18.29.1.1.4 integer read-write
Standby selection method determines the order of selection of standby when primary interface fails. The options are: sequential -- internally select next higher available standby to the last one, latest_used -- used last one freed, oldest_used -- used to longest idle one, random \255 randomly select one, explicit -- selected by user. Enumeration: 'random': 4, 'latest-used': 2, 'sequential': 1, 'explicit': 5, 'oldest-used': 3.
                                   pgtRowStatus 1.3.6.1.4.1.1751.2.18.29.1.1.5 rowstatus read-write
row status
                           interfaceProtectionTable 1.3.6.1.4.1.1751.2.18.29.2 no-access
Table of interface protection attributes
                               interfaceProtectionEntry 1.3.6.1.4.1.1751.2.18.29.2.1 no-access
Defines attributes for interface protection
                                   iptGroupId 1.3.6.1.4.1.1751.2.18.29.2.1.1 integer32 no-access
a user selected logical number representing a protection group uniquely within a PSAX.
                                   iptLogicalIntfId 1.3.6.1.4.1.1751.2.18.29.2.1.2 integer32 no-access
Logical interface number assigned by user
                                   iptPhysicalIntfId 1.3.6.1.4.1.1751.2.18.29.2.1.3 integer32 read-write
physical interface in SSPPCCC format
                                   iptIntfType 1.3.6.1.4.1.1751.2.18.29.2.1.4 integer read-write
interface primary or secondary. Enumeration: 'primary': 1, 'secondary': 2.
                                   iptOperState 1.3.6.1.4.1.1751.2.18.29.2.1.5 integer read-only
indicates operational state of the interface. Enumeration: 'active': 2, 'inactive': 1.
                                   iptOperatingIntf 1.3.6.1.4.1.1751.2.18.29.2.1.6 integer32 read-only
protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface.
                                   iptProtCommand 1.3.6.1.4.1.1751.2.18.29.2.1.7 integer read-write
protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface. Enumeration: 'switchover': 2, 'none': 1, 'switchback': 3.
                                   iptSelectedStandby 1.3.6.1.4.1.1751.2.18.29.2.1.8 integer32 read-write
Standby interface logical number on which to switch traffic. Used only in case of manual switchover with explicit standby selection.
                                   iptRowStatus 1.3.6.1.4.1.1751.2.18.29.2.1.9 rowstatus read-write
row status
                     h248Config 1.3.6.1.4.1.1751.2.18.30
                           h248TermIdTable 1.3.6.1.4.1.1751.2.18.30.1 no-access
Table of H.248 Terminations
                               h248TermIdEntry 1.3.6.1.4.1.1751.2.18.30.1.1 no-access
Row definition for H.248 Termination ID table
                                   h248TermSlotId 1.3.6.1.4.1.1751.2.18.30.1.1.1 integer no-access
Slot # for termination
                                   h248TermPhyPortId 1.3.6.1.4.1.1751.2.18.30.1.1.2 integer no-access
Physical Port # for termination
                                   h248TermLogPortId 1.3.6.1.4.1.1751.2.18.30.1.1.3 integer no-access
Logical Port # for termination
                                   h248TermChanId 1.3.6.1.4.1.1751.2.18.30.1.1.4 integer no-access
Chan # for termination
                                   h248TermVpi 1.3.6.1.4.1.1751.2.18.30.1.1.5 integer no-access
VPI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VPI = h248TermVpi - 1, for h248TermVpi > 0.
                                   h248TermVci 1.3.6.1.4.1.1751.2.18.30.1.1.6 integer no-access
VCI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VCI = h248TermVci - 1, for h248TermVci > 0.
                                   h248TermId 1.3.6.1.4.1.1751.2.18.30.1.1.7 octet string read-write
Termination ID is provisioned by user and used for identifying termination between MGC and MG
                                   h248TermAal2Cid 1.3.6.1.4.1.1751.2.18.30.1.1.8 integer read-write
AAL2 CID
                                   h248TermActivation 1.3.6.1.4.1.1751.2.18.30.1.1.9 integer read-write
Activation for termination ID Enumeration: 'enable': 2, 'disable': 1.
                                   h248TermRowStatus 1.3.6.1.4.1.1751.2.18.30.1.1.10 rowstatus read-write
h248TermIdEntry row status
                     h248SysControl 1.3.6.1.4.1.1751.2.18.31
                           h248MaxNumberOfContexts 1.3.6.1.4.1.1751.2.18.31.1 integer32 read-write
The value of the property gives the maximum number of contexts that can exist at anytime. The NULL context is not included in this number.
                           h248MaxTerminationsPerContext 1.3.6.1.4.1.1751.2.18.31.2 integer32 read-write
The max number of terminations allowed in a context.
                           h248NormalMGExecutionTime 1.3.6.1.4.1.1751.2.18.31.3 integer32 read-write
Settable by the MGC to indicate the interval within which the MGC expects a response to any transaction from the MG (exclusive of the network delay). Value represents milliseconds.
                           h248NormalMGCExecutionTime 1.3.6.1.4.1.1751.2.18.31.4 integer32 read-write
Settable by the MGC to indicate the interval within which the MG expects a response to any transaction from the MG (exclusive of the network delay). Value represents milliseconds.
                           h248MGProvisionalResponseTimerValue 1.3.6.1.4.1.1751.2.18.31.5 integer32 read-write
Indicates the time within which the MGC should expect a Pending Response from the MG if a Transaction can not be completed. Initially set to h248NormalMGExecutionTime, plus network delay, but maybe lowered. Value represents milliseconds.
                           h248MGCProvisionalResponseTimerValue 1.3.6.1.4.1.1751.2.18.31.6 integer32 read-write
Indicates the time within which the MG should expect a Pending Response from the MGC if a Transaction can not be completed. Initially set to h248NormalMGCExecutionTime, plus network delay, but maybe lowered. Value represents milliseconds.
                           h248MGCIpAddress1 1.3.6.1.4.1.1751.2.18.31.7 ipaddress read-write
The IP address of the 1st MGC.
                           h248MGCIpAddress2 1.3.6.1.4.1.1751.2.18.31.8 ipaddress read-write
The IP address of the 2nd MGC.