ACD-FILTER-MIB: View SNMP OID List / Download MIB

VENDOR: ACCEDIAN


 Home MIB: ACD-FILTER-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ACCEDIAN-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 acdFilter 1.3.6.1.4.1.22420.2.2
The Filter database for this Accedian Networks device.
     acdL2FilterTable 1.3.6.1.4.1.22420.2.2.1 no-access
Table of all Layer 2 filters
         acdL2FilterEntry 1.3.6.1.4.1.22420.2.2.1.1 no-access
A Filter is a pattern matching a definition against packets.
             acdL2FilterID 1.3.6.1.4.1.22420.2.2.1.1.1 unsigned32 no-access
Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform.
             acdL2FilterName 1.3.6.1.4.1.22420.2.2.1.1.2 displaystring read-only
This is a string to identify the filter.
             acdL2FilterMacDstEn 1.3.6.1.4.1.22420.2.2.1.1.3 truthvalue read-only
Enable or disable the destination MAC address check.
             acdL2FilterMacDst 1.3.6.1.4.1.22420.2.2.1.1.4 macaddress read-only
The destination MAC address used to compare the incoming traffic.
             acdL2FilterMacDstMask 1.3.6.1.4.1.22420.2.2.1.1.5 unsigned32 read-only
Number of destination MAC address bits to compare. Its value ranges from 0 to 48. Only specific mask are valid per platform.
             acdL2FilterMacSrcEn 1.3.6.1.4.1.22420.2.2.1.1.6 truthvalue read-only
Enable or disable the source MAC address check.
             acdL2FilterMacSrc 1.3.6.1.4.1.22420.2.2.1.1.7 macaddress read-only
The source MAC address used to compare the incoming traffic.
             acdL2FilterMacSrcMask 1.3.6.1.4.1.22420.2.2.1.1.8 unsigned32 read-only
Number of source MAC address bits to compare. Its value ranges from 0 to 48. Only specific mask are valid per platform.
             acdL2FilterEtypeEn 1.3.6.1.4.1.22420.2.2.1.1.9 truthvalue read-only
Enable or disable the Ethernet type check.
             acdL2FilterEtype 1.3.6.1.4.1.22420.2.2.1.1.10 unsigned32 read-only
The Ethernet type used to compare the incoming traffic.
             acdL2FilterVlan1PriorEn 1.3.6.1.4.1.22420.2.2.1.1.11 truthvalue read-only
Enable or disable the first VLAN priority check.
             acdL2FilterVlan1Prior 1.3.6.1.4.1.22420.2.2.1.1.12 unsigned32 read-only
The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
             acdL2FilterVlan1CfiEn 1.3.6.1.4.1.22420.2.2.1.1.13 truthvalue read-only
Enable or disable the first VLAN CFI check.
             acdL2FilterVlan1Cfi 1.3.6.1.4.1.22420.2.2.1.1.14 unsigned32 read-only
The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
             acdL2FilterVlan1IdEn 1.3.6.1.4.1.22420.2.2.1.1.15 truthvalue read-only
Enable or disable the first VLAN ID check.
             acdL2FilterVlan1Id 1.3.6.1.4.1.22420.2.2.1.1.16 unsigned32 read-only
The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdL2FilterVlan2PriorEn 1.3.6.1.4.1.22420.2.2.1.1.17 truthvalue read-only
Enable or disable the second VLAN priority check.
             acdL2FilterVlan2Prior 1.3.6.1.4.1.22420.2.2.1.1.18 unsigned32 read-only
The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
             acdL2FilterVlan2CfiEn 1.3.6.1.4.1.22420.2.2.1.1.19 truthvalue read-only
Enable or disable the second VLAN CFI check.
             acdL2FilterVlan2Cfi 1.3.6.1.4.1.22420.2.2.1.1.20 unsigned32 read-only
The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
             acdL2FilterVlan2IdEn 1.3.6.1.4.1.22420.2.2.1.1.21 truthvalue read-only
Enable or disable the second VLAN ID check.
             acdL2FilterVlan2Id 1.3.6.1.4.1.22420.2.2.1.1.22 unsigned32 read-only
The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdL2FilterRowStatus 1.3.6.1.4.1.22420.2.2.1.1.23 rowstatus read-only
All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy.
     acdIPv4FilterTable 1.3.6.1.4.1.22420.2.2.2 no-access
Table of all IPv4 filters
         acdIPv4FilterEntry 1.3.6.1.4.1.22420.2.2.2.1 no-access
A Filter is a pattern matching a definition against packets.
             acdIPv4FilterID 1.3.6.1.4.1.22420.2.2.2.1.1 unsigned32 no-access
Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform.
             acdIPv4FilterName 1.3.6.1.4.1.22420.2.2.2.1.2 displaystring read-only
This is a string to identify the filter.
             acdIPv4FilterSrcEn 1.3.6.1.4.1.22420.2.2.2.1.3 truthvalue read-only
Enable or disable the Source IP address check.
             acdIPv4FilterSrc 1.3.6.1.4.1.22420.2.2.2.1.4 ipaddress read-only
The source IP address used to compare the incoming traffic.
             acdIPv4FilterSrcMask 1.3.6.1.4.1.22420.2.2.2.1.5 ipaddress read-only
The source IP address mask used to compare the incoming traffic.
             acdIPv4FilterDstEn 1.3.6.1.4.1.22420.2.2.2.1.6 truthvalue read-only
Enable or disable the Destination IP address check.
             acdIPv4FilterDst 1.3.6.1.4.1.22420.2.2.2.1.7 ipaddress read-only
The destination IP address used to compare the incoming traffic.
             acdIPv4FilterDstMask 1.3.6.1.4.1.22420.2.2.2.1.8 ipaddress read-only
The destination IP address mask used to compare the incoming traffic.
             acdIPv4FilterProtoEn 1.3.6.1.4.1.22420.2.2.2.1.9 truthvalue read-only
Enable or disable the IP protocol check.
             acdIPv4FilterProto 1.3.6.1.4.1.22420.2.2.2.1.10 unsigned32 read-only
The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdIPv4FilterTTLEn 1.3.6.1.4.1.22420.2.2.2.1.11 truthvalue read-only
Enable or disable the TTL check.
             acdIPv4FilterTTL 1.3.6.1.4.1.22420.2.2.2.1.12 unsigned32 read-only
The TTL used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdIPv4FilterIHLEn 1.3.6.1.4.1.22420.2.2.2.1.13 truthvalue read-only
Enable or disable the IP Header Length check.
             acdIPv4FilterIHL 1.3.6.1.4.1.22420.2.2.2.1.14 unsigned32 read-only
The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15.
             acdIPv4FilterDscpEn 1.3.6.1.4.1.22420.2.2.2.1.15 truthvalue read-only
Enable or disable the DSCP (Diff-Serv Code Point) check.
             acdIPv4FilterDscp 1.3.6.1.4.1.22420.2.2.2.1.16 unsigned32 read-only
The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63.
             acdIPv4FilterECNEn 1.3.6.1.4.1.22420.2.2.2.1.17 truthvalue read-only
Enable or disable the ECN (Explicite Cogestion Notification) check.
             acdIPv4FilterECN 1.3.6.1.4.1.22420.2.2.2.1.18 unsigned32 read-only
The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3.
             acdIPv4FilterSrcPortEn 1.3.6.1.4.1.22420.2.2.2.1.19 truthvalue read-only
Enable or disable the UDP/TCP Source port check.
             acdIPv4FilterSrcPort 1.3.6.1.4.1.22420.2.2.2.1.20 unsigned32 read-only
The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535.
             acdIPv4FilterDstPortEn 1.3.6.1.4.1.22420.2.2.2.1.21 truthvalue read-only
Enable or disable the UDP/TCP Destination port check.
             acdIPv4FilterDstPort 1.3.6.1.4.1.22420.2.2.2.1.22 unsigned32 read-only
The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535.
             acdIPv4FilterIcmpTypeEn 1.3.6.1.4.1.22420.2.2.2.1.23 truthvalue read-only
Enable or disable the ICMP type check.
             acdIPv4FilterIcmpType 1.3.6.1.4.1.22420.2.2.2.1.24 unsigned32 read-only
The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdIPv4FilterIcmpCodeEn 1.3.6.1.4.1.22420.2.2.2.1.25 truthvalue read-only
Enable or disable the ICMP code check.
             acdIPv4FilterIcmpCode 1.3.6.1.4.1.22420.2.2.2.1.26 unsigned32 read-only
The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdIPv4FilterRowStatus 1.3.6.1.4.1.22420.2.2.2.1.27 rowstatus read-only
All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy.
     acdSmapL2FilterTable 1.3.6.1.4.1.22420.2.2.3 no-access
Table of all service mapping (SMAP) Layer 2 filters
         acdSmapL2FilterEntry 1.3.6.1.4.1.22420.2.2.3.1 no-access
A Filter is a pattern matching a definition against packets.
             acdSmapL2FilterID 1.3.6.1.4.1.22420.2.2.3.1.1 unsigned32 no-access
Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform.
             acdSmapL2FilterName 1.3.6.1.4.1.22420.2.2.3.1.2 displaystring read-only
This is a string to identify the filter.
             acdSmapL2FilterRowStatus 1.3.6.1.4.1.22420.2.2.3.1.3 rowstatus read-only
All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy.
             acdSmapL2FilterVlan1PriorEn 1.3.6.1.4.1.22420.2.2.3.1.4 truthvalue read-only
Enable or disable the first VLAN priority check.
             acdSmapL2FilterVlan1Prior 1.3.6.1.4.1.22420.2.2.3.1.5 unsigned32 read-only
The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
             acdSmapL2FilterVlan1PriorLast 1.3.6.1.4.1.22420.2.2.3.1.6 unsigned32 read-only
First VLAN priority last value, used in range operation. Its value ranges from 0 to 7.
             acdSmapL2FilterVlan1PriorOper 1.3.6.1.4.1.22420.2.2.3.1.7 acdfilteroperator read-only
First VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapL2FilterVlan1IdEn 1.3.6.1.4.1.22420.2.2.3.1.8 truthvalue read-only
Enable or disable the first VLAN ID check.
             acdSmapL2FilterVlan1Id 1.3.6.1.4.1.22420.2.2.3.1.9 unsigned32 read-only
The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdSmapL2FilterVlan1IdLast 1.3.6.1.4.1.22420.2.2.3.1.10 unsigned32 read-only
First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095.
             acdSmapL2FilterVlan1IdOper 1.3.6.1.4.1.22420.2.2.3.1.11 acdfilteroperator read-only
First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapL2FilterVlan1CfiEn 1.3.6.1.4.1.22420.2.2.3.1.12 truthvalue read-only
Enable or disable the first VLAN CFI check.
             acdSmapL2FilterVlan1Cfi 1.3.6.1.4.1.22420.2.2.3.1.13 unsigned32 read-only
The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
             acdSmapL2FilterVlan1TypeEn 1.3.6.1.4.1.22420.2.2.3.1.14 truthvalue read-only
Enable or disable the first VLAN Ethertype check.
             acdSmapL2FilterVlan1Type 1.3.6.1.4.1.22420.2.2.3.1.15 acdfiltervlantype read-only
VLAN Ethernet type.
             acdSmapL2FilterVlan2PriorEn 1.3.6.1.4.1.22420.2.2.3.1.16 truthvalue read-only
Enable or disable the second VLAN priority check.
             acdSmapL2FilterVlan2Prior 1.3.6.1.4.1.22420.2.2.3.1.17 unsigned32 read-only
The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
             acdSmapL2FilterVlan2PriorLast 1.3.6.1.4.1.22420.2.2.3.1.18 unsigned32 read-only
Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7.
             acdSmapL2FilterVlan2PriorOper 1.3.6.1.4.1.22420.2.2.3.1.19 acdfilteroperator read-only
VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapL2FilterVlan2IdEn 1.3.6.1.4.1.22420.2.2.3.1.20 truthvalue read-only
Enable or disable the second VLAN ID check.
             acdSmapL2FilterVlan2Id 1.3.6.1.4.1.22420.2.2.3.1.21 unsigned32 read-only
The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdSmapL2FilterVlan2IdLast 1.3.6.1.4.1.22420.2.2.3.1.22 unsigned32 read-only
Second VLAN ID last value, used in range operation. Its value ranges from 0 to 4095.
             acdSmapL2FilterVlan2IdOper 1.3.6.1.4.1.22420.2.2.3.1.23 acdfilteroperator read-only
Second VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapL2FilterVlan2CfiEn 1.3.6.1.4.1.22420.2.2.3.1.24 truthvalue read-only
Enable or disable the second VLAN CFI check.
             acdSmapL2FilterVlan2Cfi 1.3.6.1.4.1.22420.2.2.3.1.25 unsigned32 read-only
The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
             acdSmapL2FilterVlan2TypeEn 1.3.6.1.4.1.22420.2.2.3.1.26 truthvalue read-only
Enable or disable the second VLAN Ethertype check.
             acdSmapL2FilterVlan2Type 1.3.6.1.4.1.22420.2.2.3.1.27 acdfiltervlantype read-only
VLAN Ethernet type.
             acdSmapL2FilterMacDstEn 1.3.6.1.4.1.22420.2.2.3.1.28 truthvalue read-only
Enable or disable the destination MAC address check.
             acdSmapL2FilterMacDst 1.3.6.1.4.1.22420.2.2.3.1.29 macaddress read-only
The destination MAC address used to compare the incoming traffic.
             acdSmapL2FilterMacDstMask 1.3.6.1.4.1.22420.2.2.3.1.30 unsigned32 read-only
Number of destination MAC address bits to compare. Its value ranges from 0 to 48.
             acdSmapL2FilterMacSrcEn 1.3.6.1.4.1.22420.2.2.3.1.31 truthvalue read-only
Enable or disable the source MAC address check.
             acdSmapL2FilterMacSrc 1.3.6.1.4.1.22420.2.2.3.1.32 macaddress read-only
The source MAC address used to compare the incoming traffic.
             acdSmapL2FilterMacSrcMask 1.3.6.1.4.1.22420.2.2.3.1.33 unsigned32 read-only
Number of source MAC address bits to compare. Its value ranges from 0 to 48.
             acdSmapL2FilterEtypeEn 1.3.6.1.4.1.22420.2.2.3.1.34 truthvalue read-only
Enable or disable the Ethernet type check.
             acdSmapL2FilterEtype 1.3.6.1.4.1.22420.2.2.3.1.35 unsigned32 read-only
The Ethernet type used to compare the incoming traffic.
             acdSmapL2FilterIpCosEn 1.3.6.1.4.1.22420.2.2.3.1.36 truthvalue read-only
Enable or disable the Ethernet type check.
             acdSmapL2FilterIpCosMode 1.3.6.1.4.1.22420.2.2.3.1.37 integer read-only
VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). Enumeration: 'pre': 2, 'dscp': 1.
             acdSmapL2FilterDscp 1.3.6.1.4.1.22420.2.2.3.1.38 unsigned32 read-only
The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63.
             acdSmapL2FilterDscpLast 1.3.6.1.4.1.22420.2.2.3.1.39 unsigned32 read-only
The last DSCP value, used in range operation. Its value ranges from 0 to 63.
             acdSmapL2FilterDscpOper 1.3.6.1.4.1.22420.2.2.3.1.40 acdfilteroperator read-only
DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapL2FilterPre 1.3.6.1.4.1.22420.2.2.3.1.41 unsigned32 read-only
The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3.
             acdSmapL2FilterPreLast 1.3.6.1.4.1.22420.2.2.3.1.42 unsigned32 read-only
The last Precedence value, used in range operation. Its value ranges from 0 to 3.
             acdSmapL2FilterPreOper 1.3.6.1.4.1.22420.2.2.3.1.43 acdfilteroperator read-only
Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
     acdSmapIPv4FilterTable 1.3.6.1.4.1.22420.2.2.4 no-access
Table of all Extended IPv4 filters
         acdSmapIPv4FilterEntry 1.3.6.1.4.1.22420.2.2.4.1 no-access
A Filter is a pattern matching a definition against packets.
             acdSmapIPv4FilterID 1.3.6.1.4.1.22420.2.2.4.1.1 unsigned32 no-access
Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform.
             acdSmapIPv4FilterName 1.3.6.1.4.1.22420.2.2.4.1.2 displaystring read-only
This is a string to identify the filter.
             acdSmapIPv4FilterRowStatus 1.3.6.1.4.1.22420.2.2.4.1.3 rowstatus read-only
All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy.
             acdSmapIPv4FilterVlan1PriorEn 1.3.6.1.4.1.22420.2.2.4.1.4 truthvalue read-only
Enable or disable the first VLAN priority check.
             acdSmapIPv4FilterVlan1Prior 1.3.6.1.4.1.22420.2.2.4.1.5 unsigned32 read-only
The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
             acdSmapIPv4FilterVlan1PriorLast 1.3.6.1.4.1.22420.2.2.4.1.6 unsigned32 read-only
First VLAN priority last value, used in range operation. Its value ranges from 0 to 7.
             acdSmapIPv4FilterVlan1PriorOper 1.3.6.1.4.1.22420.2.2.4.1.7 acdfilteroperator read-only
VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapIPv4FilterVlan1IdEn 1.3.6.1.4.1.22420.2.2.4.1.8 truthvalue read-only
Enable or disable the first VLAN ID check.
             acdSmapIPv4FilterVlan1Id 1.3.6.1.4.1.22420.2.2.4.1.9 unsigned32 read-only
The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdSmapIPv4FilterVlan1IdLast 1.3.6.1.4.1.22420.2.2.4.1.10 unsigned32 read-only
First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095.
             acdSmapIPv4FilterVlan1IdOper 1.3.6.1.4.1.22420.2.2.4.1.11 acdfilteroperator read-only
First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapIPv4FilterVlan1CfiEn 1.3.6.1.4.1.22420.2.2.4.1.12 truthvalue read-only
Enable or disable the first VLAN CFI check.
             acdSmapIPv4FilterVlan1Cfi 1.3.6.1.4.1.22420.2.2.4.1.13 unsigned32 read-only
The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
             acdSmapIPv4FilterVlan1TypeEn 1.3.6.1.4.1.22420.2.2.4.1.14 truthvalue read-only
Enable or disable the first VLAN Ethertype check.
             acdSmapIPv4FilterVlan1Type 1.3.6.1.4.1.22420.2.2.4.1.15 acdfiltervlantype read-only
VLAN Ethernet type.
             acdSmapIPv4FilterVlan2PriorEn 1.3.6.1.4.1.22420.2.2.4.1.16 truthvalue read-only
Enable or disable the second VLAN priority check.
             acdSmapIPv4FilterVlan2Prior 1.3.6.1.4.1.22420.2.2.4.1.17 unsigned32 read-only
The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
             acdSmapIPv4FilterVlan2PriorLast 1.3.6.1.4.1.22420.2.2.4.1.18 unsigned32 read-only
Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7.
             acdSmapIPv4FilterVlan2PriorOper 1.3.6.1.4.1.22420.2.2.4.1.19 acdfilteroperator read-only
VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapIPv4FilterVlan2IdEn 1.3.6.1.4.1.22420.2.2.4.1.20 truthvalue read-only
Enable or disable the second VLAN ID check.
             acdSmapIPv4FilterVlan2Id 1.3.6.1.4.1.22420.2.2.4.1.21 unsigned32 read-only
The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdSmapIPv4FilterVlan2IdLast 1.3.6.1.4.1.22420.2.2.4.1.22 unsigned32 read-only
The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
             acdSmapIPv4FilterVlan2IdOper 1.3.6.1.4.1.22420.2.2.4.1.23 acdfilteroperator read-only
VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapIPv4FilterVlan2CfiEn 1.3.6.1.4.1.22420.2.2.4.1.24 truthvalue read-only
Enable or disable the second VLAN CFI check.
             acdSmapIPv4FilterVlan2Cfi 1.3.6.1.4.1.22420.2.2.4.1.25 unsigned32 read-only
The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
             acdSmapIPv4FilterVlan2TypeEn 1.3.6.1.4.1.22420.2.2.4.1.26 truthvalue read-only
Enable or disable the second VLAN Ethertype check.
             acdSmapIPv4FilterVlan2Type 1.3.6.1.4.1.22420.2.2.4.1.27 acdfiltervlantype read-only
VLAN Ethernet type.
             acdSmapIPv4FilterSrcEn 1.3.6.1.4.1.22420.2.2.4.1.28 truthvalue read-only
Enable or disable the Source IP address check.
             acdSmapIPv4FilterSrc 1.3.6.1.4.1.22420.2.2.4.1.29 ipaddress read-only
The source IP address used to compare the incoming traffic.
             acdSmapIPv4FilterSrcMask 1.3.6.1.4.1.22420.2.2.4.1.30 ipaddress read-only
The source IP address mask used to compare the incoming traffic.
             acdSmapIPv4FilterDstEn 1.3.6.1.4.1.22420.2.2.4.1.31 truthvalue read-only
Enable or disable the Destination IP address check.
             acdSmapIPv4FilterDst 1.3.6.1.4.1.22420.2.2.4.1.32 ipaddress read-only
The destination IP address used to compare the incoming traffic.
             acdSmapIPv4FilterDstMask 1.3.6.1.4.1.22420.2.2.4.1.33 ipaddress read-only
The destination IP address mask used to compare the incoming traffic.
             acdSmapIPv4FilterProtoEn 1.3.6.1.4.1.22420.2.2.4.1.34 truthvalue read-only
Enable or disable the IP protocol check.
             acdSmapIPv4FilterProto 1.3.6.1.4.1.22420.2.2.4.1.35 unsigned32 read-only
The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdSmapIPv4FilterTTLEn 1.3.6.1.4.1.22420.2.2.4.1.36 truthvalue read-only
Enable or disable the TTL check.
             acdSmapIPv4FilterTTL 1.3.6.1.4.1.22420.2.2.4.1.37 unsigned32 read-only
The TTL used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdSmapIPv4FilterIHLEn 1.3.6.1.4.1.22420.2.2.4.1.38 truthvalue read-only
Enable or disable the IP Header Length check.
             acdSmapIPv4FilterIHL 1.3.6.1.4.1.22420.2.2.4.1.39 unsigned32 read-only
The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15.
             acdSmapIPv4FilterIpCosEn 1.3.6.1.4.1.22420.2.2.4.1.40 truthvalue read-only
Enable or disable the Ethernet type check.
             acdSmapIPv4FilterIpCosMode 1.3.6.1.4.1.22420.2.2.4.1.41 integer read-only
VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). Enumeration: 'pre': 2, 'dscp': 1.
             acdSmapIPv4FilterDscp 1.3.6.1.4.1.22420.2.2.4.1.42 unsigned32 read-only
The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63.
             acdSmapIPv4FilterDscpLast 1.3.6.1.4.1.22420.2.2.4.1.43 unsigned32 read-only
The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63.
             acdSmapIPv4FilterDscpOper 1.3.6.1.4.1.22420.2.2.4.1.44 acdfilteroperator read-only
DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapIPv4FilterPre 1.3.6.1.4.1.22420.2.2.4.1.45 unsigned32 read-only
The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3.
             acdSmapIPv4FilterPreLast 1.3.6.1.4.1.22420.2.2.4.1.46 unsigned32 read-only
The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3.
             acdSmapIPv4FilterPreOper 1.3.6.1.4.1.22420.2.2.4.1.47 acdfilteroperator read-only
Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
             acdSmapIPv4FilterECNEn 1.3.6.1.4.1.22420.2.2.4.1.48 truthvalue read-only
Enable or disable the ECN (Explicite Cogestion Notification) check.
             acdSmapIPv4FilterECN 1.3.6.1.4.1.22420.2.2.4.1.49 unsigned32 read-only
The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3.
             acdSmapIPv4FilterSrcPortEn 1.3.6.1.4.1.22420.2.2.4.1.50 truthvalue read-only
Enable or disable the UDP/TCP Source port check.
             acdSmapIPv4FilterSrcPort 1.3.6.1.4.1.22420.2.2.4.1.51 unsigned32 read-only
The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535.
             acdSmapIPv4FilterDstPortEn 1.3.6.1.4.1.22420.2.2.4.1.52 truthvalue read-only
Enable or disable the UDP/TCP Destination port check.
             acdSmapIPv4FilterDstPort 1.3.6.1.4.1.22420.2.2.4.1.53 unsigned32 read-only
The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535.
             acdSmapIPv4FilterIcmpTypeEn 1.3.6.1.4.1.22420.2.2.4.1.54 truthvalue read-only
Enable or disable the ICMP type check.
             acdSmapIPv4FilterIcmpType 1.3.6.1.4.1.22420.2.2.4.1.55 unsigned32 read-only
The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255.
             acdSmapIPv4FilterIcmpCodeEn 1.3.6.1.4.1.22420.2.2.4.1.56 truthvalue read-only
Enable or disable the ICMP code check.
             acdSmapIPv4FilterIcmpCode 1.3.6.1.4.1.22420.2.2.4.1.57 unsigned32 read-only
The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255.
     acdFilterNotifications 1.3.6.1.4.1.22420.2.2.5
     acdFilterMIBObjects 1.3.6.1.4.1.22420.2.2.6
         acdFilterTableTid 1.3.6.1.4.1.22420.2.2.6.1
             acdSmapL2FilterTableLastChangeTid 1.3.6.1.4.1.22420.2.2.6.1.1 unsigned32 read-only
This is the transaction ID of the last change of the acdSmapL2FilterTable table. If this value is different since the last read this is indicate a table change.
             acdSmapIPv4FilterTableLastChangeTid 1.3.6.1.4.1.22420.2.2.6.1.2 unsigned32 read-only
This is the transaction ID of the last change of the acdSmapIPv4FilterTable table. If this value is different since the last read this is indicate a table change.
     acdFilterConformance 1.3.6.1.4.1.22420.2.2.7
         acdFilterCompliances 1.3.6.1.4.1.22420.2.2.7.1
             acdFilterCompliance 1.3.6.1.4.1.22420.2.2.7.1.1
The compliance statement for support of the ACD-FILTER-MIB module.
         acdFilterGroups 1.3.6.1.4.1.22420.2.2.7.2
             acdL2FilterGroup 1.3.6.1.4.1.22420.2.2.7.2.1
Objects for the L2 filter configuration Group.
             acdIPv4FilterGroup 1.3.6.1.4.1.22420.2.2.7.2.2
Objects for the IPv4 filter configuration Group.
             acdSmapL2FilterGroup 1.3.6.1.4.1.22420.2.2.7.2.3
Objects for the SMAP L2 filter configuration Group.
             acdSmapIPv4FilterGroup 1.3.6.1.4.1.22420.2.2.7.2.4
Objects for the SMAP IPv4 filter configuration Group.
             acdFilterTidGroup 1.3.6.1.4.1.22420.2.2.7.2.5
List of scalars to monitior changes in tables.