ACC-SERVICEPROFILE: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-SERVICEPROFILE
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accServiceProfile 1.3.6.1.4.1.5.1.1.65
       accServiceProfileTable 1.3.6.1.4.1.5.1.1.65.1
The Service Profile Table
           accServiceProfileEntry 1.3.6.1.4.1.5.1.1.65.1.1
An entry in the Service Profile Table
               accServiceProfileName 1.3.6.1.4.1.5.1.1.65.1.1.1
The name of the service profile. This name serves as the index for accessing information in the Sevice Profile Table. The service profile name is usually acquired from an entry in the Called Number Table.
               accServiceProfileType 1.3.6.1.4.1.5.1.1.65.1.1.2
The type of service profile entry. MPBR is normal, multi- protocol bridge/router service. CDNR is partitioned access service via called number routing.
               accServiceProfileAdminState 1.3.6.1.4.1.5.1.1.65.1.1.3
The administrative state of this service profile. If the administrative state is set to disabled, no new connections will be allowed using this profile, and all existing connections using the profile will be terminated. If the administrative state is set to drained, no new connections will be accepted, but existing connections will be maintained.
               accServiceProfileMsgLevel 1.3.6.1.4.1.5.1.1.65.1.1.4
The current severity level of trap messages that may be generated regarding events associated with this service profile. Only trap messages whose serverity level is less than or equal to the current setting of this object will be displayed.
               accServiceProfilePppDefault 1.3.6.1.4.1.5.1.1.65.1.1.5
The method used to set default PPP parameters. FACTORY indicates that factory defaults will be used or default parameters will be obtained from the usual sources (e.g., preconfigured dial ports). OVERRIDE indicates that default parameters should be overriden using values configured in this service profile. This object has been obsoleted with release 11.1.
               accServiceProfileAuthMethod 1.3.6.1.4.1.5.1.1.65.1.1.6
The default PPP authentication method for this service profile.
               accServiceProfilePortLimit 1.3.6.1.4.1.5.1.1.65.1.1.7
The maximum port limit for this service profile. A value of 1 disables PPP multilink. A value greater than 1 enables multilink negotiation.
               accServiceProfileAccessPart 1.3.6.1.4.1.5.1.1.65.1.1.8
The name of the access partition to use for this service. If the service type is CDNR, an access partition name must be configured and the corresponding access partition should be defined in the Access Partition Table. Otherwise, this object need not be configured.
               accServiceProfileModemPool 1.3.6.1.4.1.5.1.1.65.1.1.9
The name of the modem pool to use for providing service to switched users connecting via modems. If no modem pool is configured, a default modem pool will be used to provide service.
               accServiceProfileEntryStatus 1.3.6.1.4.1.5.1.1.65.1.1.10
The modification status of this service profile entry. Setting the status to add causes a new entry to be added. Setting the status to deleete causes an existing entry to be deleted.
               accServiceProfileBusyCount 1.3.6.1.4.1.5.1.1.65.1.1.11
The number of internal resources currently bound to this service profile. If the busy count is non-zero, the service profile entry cannot be removed.
               accServiceProfileNumAccepts 1.3.6.1.4.1.5.1.1.65.1.1.12
The number of incoming or outgoing connection requests accepted for this service profile.
               accServiceProfileNumRejects 1.3.6.1.4.1.5.1.1.65.1.1.13
The number of incoming or outgoing connection requests rejected for this service profile.
               accServiceProfileNumActive 1.3.6.1.4.1.5.1.1.65.1.1.14
The current number of connected physical ports using this service profile. Each physical link in a multilink bundle counts as one connection.
               accServiceProfileNumberGroup 1.3.6.1.4.1.5.1.1.65.1.1.15
The calling number group to use for incoming call screening. The calling number group is defined in the Calling Number Table. If the calling number group is 0, no incoming call screening is performed for this service profile.
               accServiceProfilePppMru 1.3.6.1.4.1.5.1.1.65.1.1.16
The default maximum receive unit to negotiate for the PPP connection using this service profile.
               accServiceProfileMlpppMrru 1.3.6.1.4.1.5.1.1.65.1.1.17
The default maximum reassembly receive unit to negotiate for the Multilink PPP connection using this service profile.
               accServiceProfileMlxState 1.3.6.1.4.1.5.1.1.65.1.1.18
The default MLX administrative state for the Multilink PPP connection using this service profile. This object has been obsoleted with release 11.1.
               accServiceProfileWelcomeMessage 1.3.6.1.4.1.5.1.1.65.1.1.19
This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to welcome the user. It will appear before the username/login prompt.
               accServiceProfileLoginPrompt 1.3.6.1.4.1.5.1.1.65.1.1.20
This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to prompt the user for entry of a username. It will appear after the Welcome Message.
               accServiceProfilePasswordPrompt 1.3.6.1.4.1.5.1.1.65.1.1.21
This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to prompt the user for entry of a password. It will appear after the Login Prompt.
               accServiceProfileServicePrompt 1.3.6.1.4.1.5.1.1.65.1.1.22
This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) after successful authentication has occurred. It will appear after the password prompt.
               accServiceProfileLoginTimeout 1.3.6.1.4.1.5.1.1.65.1.1.23
The duration in seconds that the system will wait for an answer to a login/password prompt. After this timeout, the system will start normal PPP negotiation. Zero disables timer (no timeout).
               accServiceProfileAuthPreference 1.3.6.1.4.1.5.1.1.65.1.1.24
The authentication preference for this service profile. This This object is useful for altering the behavior of PPP negotiation when providing service to clietns that cannot be configured to deny negotiation of the stronger CHAP authentication method and PAP authentication is required. PAP is the default setting.
               accServiceProfileAccountingOptn 1.3.6.1.4.1.5.1.1.65.1.1.25
The Accounting option for this service profile. This is used to enable or disable RADIUS accounting for PPP sessions associated with this service profile. RADIUS accounting is enabled by default.
               accServiceProfileBandwidthMgmt 1.3.6.1.4.1.5.1.1.65.1.1.26
The bandwidth management protocols that can be negotiated for PPP connections associated with this service profile. BACP enables the negotiation of the Bandwidth Allocation Control Protocol (BACP) and Bandwidth Allocation Protocol (BAP). This is the default setting. MLX enables the Multilink Extended (MLX) protocol. MLX is compatible with MP+. DEFAULT disables negotiation of BACP or MLX and uses local mechanisms for adding bandwidth to PPP multilink connections. ANY enables the negotiation of any supported management protocol. This objects supercedes the accServiceProfileMlxState object that was previously used to enable MLX negotiation.
               accServiceProfilePppIpComp 1.3.6.1.4.1.5.1.1.65.1.1.27
The VJ header compression option for this service profile.
       accServiceProfilePortTable 1.3.6.1.4.1.5.1.1.65.2
The Service Profile Port Table
           accServiceProfilePortEntry 1.3.6.1.4.1.5.1.1.65.2.1
An entry in the Service Profile Port Table
               accServiceProfileIfIndex 1.3.6.1.4.1.5.1.1.65.2.1.1
The interface index of the physical port associated with this entry.
               accServiceProfileConfiguredName 1.3.6.1.4.1.5.1.1.65.2.1.2
The name of the service profile configured for this physical port.
               accServiceProfileActiveName 1.3.6.1.4.1.5.1.1.65.2.1.3
The name of the service profile currently active for this physical port. If a service profile has been manually configured for this port, the active profile will always be the same as the configured profile. Otherwise, the active service profile is assigned dynamically when the physical circuit is connected.
               accServiceProfileActiveType 1.3.6.1.4.1.5.1.1.65.2.1.4
The type of service associated with the active service profile.