ACC-FR: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-FR
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accFr 1.3.6.1.4.1.5.1.1.20
       accFrAtTable 1.3.6.1.4.1.5.1.1.20.1
Internet address translation table for Frame Relay interfaces. Entries are added/deleted via management action.
           accFrAtEntry 1.3.6.1.4.1.5.1.1.20.1.1
Internet address translation entry for Frame Relay interfaces.
               accFrAtIfIndex 1.3.6.1.4.1.5.1.1.20.1.1.1
Interface number (ifIndex) for which this translation entry is valid. Object required in entry-adding SET PDU.
               accFrIpAddress 1.3.6.1.4.1.5.1.1.20.1.1.2
IP Address Object required in entry-adding SET PDU.
               accFrDLCI 1.3.6.1.4.1.5.1.1.20.1.1.3
Frame Relay DLCI to use for the specified host Object required in entry-adding SET PDU.
               accFrStatus 1.3.6.1.4.1.5.1.1.20.1.1.4
Status of this entry Object required in entry-adding SET PDU.
       accFrStatTable 1.3.6.1.4.1.5.1.1.20.2
Per-line statistics for Frame Relay interfaces
           accFrStatEntry 1.3.6.1.4.1.5.1.1.20.2.1
Frame Relay statistics
               accFrIndex 1.3.6.1.4.1.5.1.1.20.2.1.1
Physical Port number of this Frame Relay interface.
               accFrStatRcvDrops 1.3.6.1.4.1.5.1.1.20.2.1.2
Number of received frames that were discarded due to lack of resources.
               accFrStatShorts 1.3.6.1.4.1.5.1.1.20.2.1.3
Number of received frames that were discarded because they were too short (DLCI and/or protocol field missing).
               accFrStatIllDlcis 1.3.6.1.4.1.5.1.1.20.2.1.4
Number of received frames that were discarded because the DLCI was badly formed.
               accFrStatUnkDlcis 1.3.6.1.4.1.5.1.1.20.2.1.5
Number of received frames that were discarded because the DLCI did not match any configured value.
               accFrStatUnkProtos 1.3.6.1.4.1.5.1.1.20.2.1.6
Number of received frames that were discarded because the protocol field did not match any protocol configured for the specified DLCI.
               accFrStatRsrvDlcis 1.3.6.1.4.1.5.1.1.20.2.1.7
Number of received frames whose DLCI had the reserved bit set. (The frame was not discarded; the frame was processed as though the reserved bit were clear).
               accFrStatXmtDrops 1.3.6.1.4.1.5.1.1.20.2.1.8
Number of frames that could not be transmitted due to lack of resources.
               accFrStatErrTime 1.3.6.1.4.1.5.1.1.20.2.1.9
System uptime when the last Frame Relay error was detected.
               accFrStatErrType 1.3.6.1.4.1.5.1.1.20.2.1.10
Type of last detected Frame Relay error.
               accFrStatErrDlci 1.3.6.1.4.1.5.1.1.20.2.1.11
Value of DLCI field from last detected Frame Relay error (00 00 if no DLCI was associated with the last error).
               accFrStatErrProto 1.3.6.1.4.1.5.1.1.20.2.1.12
Value of protocol field from last detected Frame Relay error (0 if no protocol field was associated with the last error).
               accFrLinkState 1.3.6.1.4.1.5.1.1.20.2.1.13
State of this Frame Relay link
               accFrStatUnks 1.3.6.1.4.1.5.1.1.20.2.1.14
Unused object
               accFrStatRcvLongs 1.3.6.1.4.1.5.1.1.20.2.1.15
Number of received dlcmi frames longer than expected.
               accFrStatIlgDlcis 1.3.6.1.4.1.5.1.1.20.2.1.16
Unused object
               accFrStatProtoErrs 1.3.6.1.4.1.5.1.1.20.2.1.17
Number of received frames with a protocol violation.
               accFrStatUnkIes 1.3.6.1.4.1.5.1.1.20.2.1.18
Number of dlcmi frames received with an unknown Information element.
               accFrStatSeqErrs 1.3.6.1.4.1.5.1.1.20.2.1.19
Number of dlcmi frames received with a sequence error.
               accFrStatUnkRpts 1.3.6.1.4.1.5.1.1.20.2.1.20
Unused object
       accFrParmTable 1.3.6.1.4.1.5.1.1.20.3
Frame Relay parameter table
           accFrParmEntry 1.3.6.1.4.1.5.1.1.20.3.1
Frame Relay parameter entry
               accFrParmIndex 1.3.6.1.4.1.5.1.1.20.3.1.1
Interface number
               accFrParmAddrFmt 1.3.6.1.4.1.5.1.1.20.3.1.2
Addressing format used. Q.921 per spec. Ignores length parameter draft-Q922 per March, 1990 draft of Q.922 q922 per October, 1990 Q.922 specification
               accFrParmAddrLen 1.3.6.1.4.1.5.1.1.20.3.1.3
Length of address on serial line
               accFrParmEncap 1.3.6.1.4.1.5.1.1.20.3.1.4
Type of encapsulation used on serial line
               accFrDlcmiState 1.3.6.1.4.1.5.1.1.20.3.1.5
This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.
               accFrDlcmiPollInt 1.3.6.1.4.1.5.1.1.20.3.1.6
the number of seconds between successive status enquiry messages.
               accFrDlcmiFullStatEnq 1.3.6.1.4.1.5.1.1.20.3.1.7
Number of status enquiry intervals that pass before issuance of a full status enquiry message.
               accFrDlcmiErrThres 1.3.6.1.4.1.5.1.1.20.3.1.8
Maximum number of unanswered Status Enquiries the equipmemt shall accept before declaring the interface down.
               accFrDlcmiMonEvents 1.3.6.1.4.1.5.1.1.20.3.1.9
Maximum number of responses to FULL STATUS or LINK INTEGRITY VERIFICATION messages missed before the device will mark the interface down.
               accFrDlcmiType 1.3.6.1.4.1.5.1.1.20.3.1.10
Link Maintenance is assymmetrical, so one end must be user, the other network. Normally the bridge/router is user.
               accFrDlcmiIdleTimer 1.3.6.1.4.1.5.1.1.20.3.1.11
Number of minutes without receiving any non-dlcmi frames before declaring the link idle. Setting the timer to 0 will disable it.
       accFrCktTable 1.3.6.1.4.1.5.1.1.20.4
Frame Relay circuit table
           accFrCktEntry 1.3.6.1.4.1.5.1.1.20.4.1
Frame Relay circuit table entry
               accFrCktIfIndex 1.3.6.1.4.1.5.1.1.20.4.1.1
Interface on which this circuit exists
               accFrCktDlci 1.3.6.1.4.1.5.1.1.20.4.1.2
Data Link Connection Identifier for this circuit.
               accFrCktState 1.3.6.1.4.1.5.1.1.20.4.1.3
Indicates whether the particular circuit is operational.
               accFrCktFECNrcvds 1.3.6.1.4.1.5.1.1.20.4.1.4
Number of frames received from the network in- dicating forward congestion since the circuit was created.
               accFrCktBECNrcvds 1.3.6.1.4.1.5.1.1.20.4.1.5
Number of frames received from the network in- dicating backward congestion since the circuit was created.
               accFrCktFrameXmts 1.3.6.1.4.1.5.1.1.20.4.1.6
Number of frames sent from this circuit since it was created.
               accFrCktOctetXmts 1.3.6.1.4.1.5.1.1.20.4.1.7
Number of octets sent from this circuit since it was created.
               accFrCktFrameRcvs 1.3.6.1.4.1.5.1.1.20.4.1.8
Number of frames received by this circuit since it was created.
               accFrCktOctetRcvs 1.3.6.1.4.1.5.1.1.20.4.1.9
Number of octets received by this circuit since it was created.
               accFrCktCreateTime 1.3.6.1.4.1.5.1.1.20.4.1.10
The value of sysUpTime when the circuit was created.
               accFrCktChangeTime 1.3.6.1.4.1.5.1.1.20.4.1.11
The value of sysUpTime when last there was a change in the circuit state.
               accFfrCktLoop 1.3.6.1.4.1.5.1.1.20.4.1.12
Indicates the loopback state of the virtual circuit. The object is normally normal, indicating that the circuit is in its normal operational state. If set to loop, any messages received on the circuit will be returned unmodified and the circuit will always be viewed as down by higher layer protocols. The state of any circuit reverts to normal after a reset.
       accFfrSwitchParameterTable 1.3.6.1.4.1.5.1.1.20.5
Frame Relay Switch Parameter table
           accFfrSwitchParameterEntry 1.3.6.1.4.1.5.1.1.20.5.1
An entry in Frame Relay Switch Parameter table
               accFfrSwitchIfindex1 1.3.6.1.4.1.5.1.1.20.5.1.1
The first interface index in the entry
               accFfrSwitchDlci1 1.3.6.1.4.1.5.1.1.20.5.1.2
The first Frame Relay DLCI in the entry
               accFfrSwitchIfindex2 1.3.6.1.4.1.5.1.1.20.5.1.3
The second interface index in the entry
               accFfrSwitchDlci2 1.3.6.1.4.1.5.1.1.20.5.1.4
The second Frame Relay DLCI in the entry
               accFfrSwitchStatus 1.3.6.1.4.1.5.1.1.20.5.1.5
The Status tells whether the traffic will be switched as per the entry. This object also is usedin the delete command
       accVFRTable 1.3.6.1.4.1.5.1.1.20.6
Table describing binding between a Virtual port and a Frame Relay DLCI and a physical port. Entries are added/deleted via management Action.
           accVFRTableEntry 1.3.6.1.4.1.5.1.1.20.6.1
An entry in the Virtual Frame Relay DLCI Table.
               accVFRVirtualPort 1.3.6.1.4.1.5.1.1.20.6.1.1
The virtual port to be associated with a Physical Port and DLCI.
               accVFRPhysicalPort 1.3.6.1.4.1.5.1.1.20.6.1.2
The Physical Port to be associated with a virtual port and dlci.
               accVFRDlci 1.3.6.1.4.1.5.1.1.20.6.1.3
The DLCI to be associated with a virtual and physical port.
               accVFRStatus 1.3.6.1.4.1.5.1.1.20.6.1.4
The status field indicates if an add or delete is intended. Invalid = delete; Valid = add.