AC-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: AUDIOCODES LTD


 Home MIB: AC-SYSTEM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 acSystem 1.3.6.1.4.1.5003.9.10.10
       acSystemConfiguration 1.3.6.1.4.1.5003.9.10.10.1
           acSysControl 1.3.6.1.4.1.5003.9.10.10.1.1
               acSysControlProtocolType 1.3.6.1.4.1.5003.9.10.10.1.1.1 integer read-write
Defines the control protocol type. Choose either: 0 = None 1 = MGCP 2 = MEGACO 4 = H.323 8 = SIP. Access: Offline. AC INI-Param: MGCONTROLPROTOCOLTYPE Enumeration: 'controlProtocol-None': 0, 'controlProtocol-SIP': 8, 'controlProtocol-H323': 4, 'controlProtocol-MGCP': 1, 'controlProtocol-MEGACO': 2.
               acSysControlTrunkingToAnalogFunctionalityProfile 1.3.6.1.4.1.5003.9.10.10.1.1.2 integer read-write
This parameter defines the Trunking to Analog Functionality Profile. 0 = Disable 1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality Refer to the enumerator acTrunkingToAnalogFunctionalityProfile enum for the possible values. Access: Offline. AC INI-Param: TrunkingToAnalogFunctionalityProfile Enumeration: 'disable': 0, 'cASAnalog': 1.
           acSysTDM 1.3.6.1.4.1.5003.9.10.10.1.2
               acSysTDMClock 1.3.6.1.4.1.5003.9.10.10.1.2.1
                   acSysTDMClockSource 1.3.6.1.4.1.5003.9.10.10.1.2.1.1 integer read-write
Selects the clock source on which the board synchronizes. 1 = Local oscillator 3 = MVIP 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2 12 = SC2M 13 = SC4M 14 = SC8M 15 = BITS 16 = Network-B 17 = ATM-OC3 18 = ATM-OC3-B 19 = ATM-OC12 20 = Network-DS3-1 21 = Network-DS3-2 22 = Network-DS3-3 Default = 1 TP-1610 = 3. Access: Online. AC INI-Param: TDMBUSCLOCKSOURCE Enumeration: 'aTM-OC12': 19, 'network': 4, 'aTM-OC3-B': 18, 'network-b': 16, 'netReference1': 10, 'aTM-OC3': 17, 'netReference2': 11, 'h110-B': 9, 'h110-A': 8, 'internal': 1, 'network-DS3-1': 20, 'network-DS3-3': 22, 'network-DS3-2': 21, 'sC-2M': 12, 'mVIP': 3, 'sC-8M': 14, 'bITS': 15, 'sC-4M': 13.
                   acSysTDMClockEnableFallBack 1.3.6.1.4.1.5003.9.10.10.1.2.1.2 integer read-write
Defines the auto fallback of the clock. Range: 0 = Manual 1 = Auto Non-Revertive 2 = Auto Revertive. Access: Online. AC INI-Param: TDMBUSENABLEFALLBACK Enumeration: 'autoNon-Revertive': 1, 'auto-Revertive': 2, 'manual': 0.
                   acSysTDMClockLocalReference 1.3.6.1.4.1.5003.9.10.10.1.2.1.3 unsigned32 read-write
When the clock source is set to Network, this parameter selects the Trunk ID to be used as the clock synchronization source of the board. When using H.110/H.100 bus, this parameter also selects the trunk used as the clock source for the NetRef clock generation (in this case, the clock source must not be set to Network. Range = 0 to (MAX_TRUNK _NUM-1). Access: Online. AC INI-Param: TDMBusLocalReference
                   acSysTDMClockMasterSlaveSelection 1.3.6.1.4.1.5003.9.10.10.1.2.1.4 integer read-write
Sets SC/MVIP/H.100/H.110 to either: 0 = Slave mode (another board in the system must supply the clock to the TDM bus) or Master mode (the board is the clock source for the TDM bus) or Secondary Master mode (for H100/H110 Bus only). 1 = H110A Master in Master mode 2 = H.110B Master. Access: Online. AC INI-Param: TDMBUSMASTERSLAVESELECTION Enumeration: 'acH110BusSecondaryMasterMode': 2, 'acTDMBusMasterMode': 1, 'acTDMBusSlaveMode': 0.
                   acSysTDMClockNetRefSpeed 1.3.6.1.4.1.5003.9.10.10.1.2.1.5 integer read-write
Determines the NetRef frequency (for both generation and synchronization). 0 = 8 kHz 1 = 1.544 MHz 2 = 2.048 MHz. Access: Online. AC INI-Param: TDMBUSNETREFSPEED Enumeration: 'acTH110BusNetRefSpeed-8khz': 0, 'acTH110BusNetRefSpeed-1544khz': 1, 'acTH110BusNetRefSpeed-20488khz': 2.
                   acSysTDMClockAutoFallBackEnable 1.3.6.1.4.1.5003.9.10.10.1.2.1.6 integer read-write
Enables or disables the PSTN trunk auto-fallback feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockEnable Enumeration: 'enable': 1, 'disable': 0.
                   acSysTDMClockAutoFallBackRevertingEnable 1.3.6.1.4.1.5003.9.10.10.1.2.1.7 integer read-write
Enables/disables the PSTN trunk auto-fallback reverting feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockRevertingEnable Enumeration: 'enable': 1, 'disable': 0.
                   acSysTDMClockBitsReference 1.3.6.1.4.1.5003.9.10.10.1.2.1.8 unsigned32 read-write
Configures the BITS clock reference when the board source clock is set to BITS and Fallback is set to manual or non-revertive. 1 = REF_1 2 = REF_2. Access: Online. AC INI-Param: TDMBITSClockReference
                   acSysTDMClockPLLOutOfRange 1.3.6.1.4.1.5003.9.10.10.1.2.1.9 integer read-write
Determines the valid PPM range outside the Stratum 3 standard. This parameter is only relevant for the TP8410 on the Mediant 3000. This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7). Access: Online. AC INI-Param: PLLOutOfRange Enumeration: 'oor-13-8to18ppm': 4, 'oor-40to52ppm': 1, 'oor-9-2to12ppm': 0, 'oor-100to130ppm': 2, 'oor-24-6to32ppm': 5, 'oor-52to67-5ppm': 7, 'oor-36-6to47-5ppm': 6, 'oor-64to83ppm': 3.
                   acSysTDMClockFallbackClock 1.3.6.1.4.1.5003.9.10.10.1.2.1.10 integer read-write
Selects the fallback clock source on which board synchronizes in the event of clock failure. 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2. Access: Online. AC INI-Param: TDMBusFallbackClock Enumeration: 'h110-B': 9, 'h110-A': 8, 'netReference1': 10, 'network': 4, 'netReference2': 11.
               acSysTDMBus 1.3.6.1.4.1.5003.9.10.10.1.2.2
                   acSysTDMBusType 1.3.6.1.4.1.5003.9.10.10.1.2.2.1 integer read-write
Selects the TDM bus interface to be used (only one TDM bus interface can be enabled at one time although more than one can physically exist on the board). Range: 0 = acMVIP_BUS 1 = acSC_BUS 2 = acFRAMERS 4 = acH100_BUS 5 = EXT TDM 6 = Analog 8 = SW Pstn Default: TP-1610 and TP-2810 = 2 TPM-1100 = 5 TP-260 = 1. Access: Offline. AC INI-Param: TDMBUSTYPE Enumeration: 'qSLAC-BUS': 3, 'uSE-FRAMERS': 2, 'uSE-H110-BUS': 4, 'sC-BUS': 1, 'uSE-EXT-BUS': 5, 'aNALOG-BUS': 6, 'mVIP-BUS': 0, 'uSE-PSTN-SW-ONLY': 8.
                   acSysTDMBusSpeed 1.3.6.1.4.1.5003.9.10.10.1.2.2.2 integer read-write
Selects the TDM bus speed according to the Bus Type as follows: SC = 0/2/3 H.110/H.100 = 3 MVIP = 0 Where: 0 = 2048 kbps 2 = 4096 kbps 3 = 8192 kbps 4 = 16384 kbps Default: TP-260 = 2 All other boards = 3. Access: Offline. AC INI-Param: TDMBUSSPEED Enumeration: 'acTDMBusSpeed-4Mbps': 2, 'acTDMBusSpeed-16Mbps': 4, 'acTDMBusSpeed-2Mbps': 0, 'acTDMBusSpeed-8Mbps': 3.
                   acSysTDMBusOutputPort 1.3.6.1.4.1.5003.9.10.10.1.2.2.3 unsigned32 read-write
Defines the SC/MVIP/H.100/H.110 output port to be used for the board's channel #0. All other channels then occupy the next timeslots sequentially. Range: 0 to 15 for SC/MVIP 0 to 31 for H.110. Access: Offline. AC INI-Param: TDMBUSOUTPUTPORT
                   acSysTDMBusOutputStartingChannel 1.3.6.1.4.1.5003.9.10.10.1.2.2.4 unsigned32 read-write
Defines the outgoing TDM Timeslot for board's channel #0. The remaining channels are organized sequentially. Access: Offline. AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNEL
               acSysPCM 1.3.6.1.4.1.5003.9.10.10.1.2.3
                   acSysPCMLawSelect 1.3.6.1.4.1.5003.9.10.10.1.2.3.1 integer read-write
Selects the type of PCM companding law in input/output TDM bus (TDM bus is defined using the TDMBusType parameter). 1 = A-law 3 = Mu-Law. Access: Offline. AC INI-Param: PCMLAWSELECT Enumeration: 'aLaw': 1, 'automatic': 0, 'muLaw': 3.
                   acSysPCMIdlePattern 1.3.6.1.4.1.5003.9.10.10.1.2.3.2 unsigned32 read-write
Defines the PCM pattern applied to the E1/T1 timeslot (B-channel) when the channel is idle. Default: 0xFF if PCMLawSelect is Mu-Law 0xD5 if PCMLawSelect is A-Law Range = 0x00 to 0xFF. Access: Offline. AC INI-Param: IDLEPCMPATTERN
                   acSysPCMIdleABCDPattern 1.3.6.1.4.1.5003.9.10.10.1.2.3.3 unsigned32 read-write
Defines the ABCD (CAS) pattern to be applied on the signaling bus before it is changed by the user or the PSTN protocol. This is only relevant when using PSTN interface with CAS protocols. Range = 0x0 to 0xF. Access: Offline. AC INI-Param: IDLEABCDPATTERN
                   acSysPCMSerialPortAuditIntervalMin 1.3.6.1.4.1.5003.9.10.10.1.2.3.4 unsigned32 read-write
Interval timeout in minutes, of the Serial Port audit. In case of 0 value, the audit isn't running. Access: Offline. AC INI-Param: SerialPortAuditIntervalMin
           acSysNetworkConfig 1.3.6.1.4.1.5003.9.10.10.1.3
               acSysIP 1.3.6.1.4.1.5003.9.10.10.1.3.1
                   acSysIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.1 ipaddress read-write
Board IP Address. In human readable form. in host byte order e.g. 192.10.1.2 = 0xc00a0102). Users should set the subnet mask to a valid value per the IP address. Access: Online. AC INI-Param: N/A
                   acSysIPSubNetAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.2 ipaddress read-write
Board SubNet Address. In human readable form. (in host byte order e.g. 255.255.255.0 = 0xffffff00). default =255.255.255.0. Access: Online. AC INI-Param: N/A
                   acSysIPDefaultGatewayAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.3 ipaddress read-write
Default Gateway Address. Board's Default Gateway IP address. In human readable form. (in host byte order e.g. 192.10.1.255 = 0xc00a01ff). Access: Online. AC INI-Param: N/A
                   acSysIPDHCPEnable 1.3.6.1.4.1.5003.9.10.10.1.3.1.4 integer read-write
Enables/disables DHCP support. 0 = Disable 1 = Enable After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is enabled, the gateway attempts to obtain its IP address and other network parameters from the DHCP server. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isnt deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. Note: DHCPEnable is a special Hidden parameter. Once defined and saved in flash memory, its assigned value doesnt revert to its default even if the parameter doesn't appear in the INI file. Access: Online. AC INI-Param: DHCPEnable Enumeration: 'enable': 1, 'disable': 0.
                   acSysIPDHCPSpeedFactor 1.3.6.1.4.1.5003.9.10.10.1.3.1.5 unsigned32 read-write
Controls the DHCP renewal speed. When set to 0, the DHCP lease renewal is disabled. Otherwise, the renewal time is divided by this factor. Some DHCP-enabled routers perform better when set to 4. 0 = Disable DHCP 1 = Normal 2 to 10 = Fast. Access: Offline. AC INI-Param: DHCPSpeedFactor
                   acSysIPDnsPrimaryServerType 1.3.6.1.4.1.5003.9.10.10.1.3.1.6 integer read-write
This parameter defines the DNS primary server's IP address type. Access: Offline. AC INI-Param: N/A Enumeration: 'ipv4': 1.
                   acSysIPDnsPrimaryServer 1.3.6.1.4.1.5003.9.10.10.1.3.1.7 inetaddress read-write
This parameter defines the DNS primary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSPriServerIP
                   acSysIPDnsSecondaryServerType 1.3.6.1.4.1.5003.9.10.10.1.3.1.8 integer read-write
This parameter defines the DNS secondary server's IP address type. Access: Offline. AC INI-Param: N/A Enumeration: 'ipv4': 1.
                   acSysIPDnsSecondaryServer 1.3.6.1.4.1.5003.9.10.10.1.3.1.9 inetaddress read-write
This parameter defines the DNS secondary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSSecServerIP
                   acSysIPDHCPLeaseRenewalEnable 1.3.6.1.4.1.5003.9.10.10.1.3.1.10 integer read-write
Enables/disables DHCP renewal support. This paramater will only take effect if DHCPEnable = 0. After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is disabled, the gateway will boot from flash. It will then attempt to communicate with the DHCP server to renew the lease. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isnt deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. For cases where the booting the board via DHCP is not desirable, but renewing DHCP leasing is. if DHCPEnable = 1, this paramater will not have any effect. Access: Online. AC INI-Param: EnableDHCPLeaseRenewal Enumeration: 'enable': 1, 'disable': 0.
                   acMultipleIP 1.3.6.1.4.1.5003.9.10.10.1.3.1.30
                         acMultipleIPEnable 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.1 integer read-write
Enables the multiple IPs feature. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableMultipleIPs Enumeration: 'enable': 1, 'disable': 0.
                         acMultipleIPEnableTPNCPasOAM 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.2 integer read-write
Sets the TPNCP location on the Operation, Administration and Management (OAM) network, when operating in multiple IPs mode. If this parameter is set and the machine is working in multiple IPs mode, TPNCP is located on the OAM network. 0 = TPNCP on Control network 1 = TPNCP on OAM network. Access: Offline. AC INI-Param: EnableTPNCPasOAM Enumeration: 'enable': 1, 'disable': 0.
                         acMultipleIPEnableDNSasOAM 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.3 integer read-write
Sets the location of the DNS. If this parameter is set and the machine is functioning in multiple IPs mode, the DNS is located on the OAM network. If not, the DNS is on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableDNSasOAM Enumeration: 'enable': 1, 'disable': 0.
                         acMultipleIPEnableNTPasOAM 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4 integer read-write
Sets the location of the Network Time Protocol (NTP). If this parameter is set and the machine is functioning in multiple IPs mode, the NTP is located on the OAM network. If not, the NTP is located on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableNTPasOAM Enumeration: 'enable': 1, 'disable': 0.
                         acMultipleIPEnableSCTPasControl 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5 integer read-write
Sets the location of the Stream Control Transmission Protocol (SCTP). If this parameter is set and the machine is functioning in multiple IPs mode, the SCTP is located on the control network. If not, the SCTP is located on the OAM network. 0 = Default 1 = Enable. Access: Offline. AC INI-Param: EnableSCTPasControl Enumeration: 'enable': 1, 'disable': 0.
                         acMultipleIPEnableNetwotkSeparation 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.6 integer read-write
Enables Network Physical Separation. Allows the user to have separate port for each Network. Requires suitable hardware. 0 = Disabled 1 = Enabled. Access: Offline. AC INI-Param: ENABLENETWORKPHYSICALSEPARATION Enumeration: 'enable': 1, 'disable': 0.
                         acMultipleIPInterfaceTableAction 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.7 integer read-write
This is an action object. Set this to validateConfiguration(2) when you want the configuration in the acSysInterfaceTable to be validated immediately (as opposed to at reset). done(1) is the default value for any GET on this object. The results of the action should be followed in the syslog. Access: Instant. AC INI-Param: N/A Enumeration: 'validateConfiguration': 2, 'done': 1.
                         acNetworkIPTable 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21 no-access
IP control table. Enables to add, remove or configure the device's networks.
                               acNetworkIPEntry 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1 no-access
                                   acNetworkIPIndex 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.1 integer no-access
The row's index. AC INI-Param: N/A Enumeration: 'control': 3, 'media': 2, 'oam': 1.
                                   acNetworkIPIfIndex 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.2 unsigned32 read-only
The row's index in the IF MIB. The IF MIB is not yet supported and so for now this is the same as the ipCidrRouteIfIndex object. 0 = OAM 1 = Media 2 = Control. AC INI-Param: N/A
                                   acNetworkIPLocalIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.3 ipaddress read-write
Sets the IP address of the OAM (Operation, Administration & Management) when operating in multiple IPs mode. Range: Legal IP address Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
                                   acNetworkIPLocalSubnetMask 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.4 ipaddress read-write
Sets the Subnet Mask for the OAM interface, when operating in multiple IPs mode. Range: Legal Subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
                                   acNetworkIPLocalDefGW 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.5 ipaddress read-write
Sets the Default gateway for the OAM interface when operating in multiple IPs mode. Range: Legal IP address in subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/A
                                   acNetworkIPAdminState 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.6 integer read-write
Determines if a row is currentely active or not. Lock(1) - the row is in configuration (non active) state. UnLock(2) - row is in active state. Access: Online. AC INI-Param: N/A Enumeration: 'lock': 1, 'unLock': 2.
                         acSysInterfaceTable 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22 no-access
Multiple Interfaces' Interface Table
                               acSysInterfaceEntry 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1 no-access
                                   acSysInterfaceIndex 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1 unsigned32 no-access
Index Field for line. AC INI-Param: InterfaceTable_Index
                                   acSysInterfaceRowStatus 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.2 rowstatus read-only
ROWSTATUS Field for line. AC INI-Param: InterfaceTable_RowStatus
                                   acSysInterfaceAction 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.3 integer read-only
Mangement Field for ACTIONS. AC INI-Param: InterfaceTable_Action Enumeration: 'none': 0.
                                   acSysInterfaceActionRes 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.4 integer read-only
Mangement Field for ACTIONS RESULT. AC INI-Param: InterfaceTable_ActionRes Enumeration: 'succeeded': 0.
                                   acSysInterfaceApplicationTypes 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.5 integer read-only
The type assigned to the interface. Access: Offline. AC INI-Param: InterfaceTable_ApplicationTypes Enumeration: 'control': 2, 'oamAndMediaAndControl': 6, 'oamAndControl': 4, 'media': 1, 'oam': 0, 'oamAndMedia': 3, 'mediaAndControl': 5.
                                   acSysInterfaceMode 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.6 integer read-only
Interface configuration mode. Access: Offline. AC INI-Param: InterfaceTable_InterfaceMode Enumeration: 'iPv6PrefixManual': 3, 'iPv4Manual': 10, 'iPv6Manual': 4.
                                   acSysInterfaceIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.7 snmpadminstring read-only
IP Address (can be either IPv4 or IPv6) for this interface. Access: Online. AC INI-Param: InterfaceTable_IPAddress
                                   acSysInterfacePrefixLength 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.8 unsigned32 read-only
The number of 1 bits in this interfaces netmask. Access: Offline. AC INI-Param: InterfaceTable_PrefixLength
                                   acSysInterfaceGateway 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.9 snmpadminstring read-only
Default Gateway. Filled in one row only. 0 in others. Access: Offline. AC INI-Param: InterfaceTable_Gateway
                                   acSysInterfaceVlanID 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.10 unsigned32 read-only
VLAN ID of this interface. Access: Offline. AC INI-Param: InterfaceTable_VlanID
                                   acSysInterfaceName 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11 snmpadminstring read-only
a 16 character string of this interfaces name. Access: Offline. AC INI-Param: InterfaceTable_InterfaceName
               acSyslog 1.3.6.1.4.1.5003.9.10.10.1.3.2
                   acSyslogServerIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.2.1 ipaddress read-write
This parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Instant. AC INI-Param: SYSLOGSERVERIP
                   acSyslogEnable 1.3.6.1.4.1.5003.9.10.10.1.3.2.2 integer read-write
Enable SysLog protocol log. Access: Online. AC INI-Param: ENABLESYSLOG Enumeration: 'enable': 1, 'disable': 0.
                   acSyslogAcSyslogServerPortNumber 1.3.6.1.4.1.5003.9.10.10.1.3.2.3 unsigned32 read-write
Defines the Port number of the Syslog Server. Range = Legal Port Number. Access: Instant. AC INI-Param: SyslogServerPort
               acSysNTP 1.3.6.1.4.1.5003.9.10.10.1.3.3
                   acSysNTPServerIPAddress 1.3.6.1.4.1.5003.9.10.10.1.3.3.1 ipaddress read-write
This parameter is used to define the NTP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: NTPServerIP
                   acSysNTPUtcOffset 1.3.6.1.4.1.5003.9.10.10.1.3.3.2 integer32 read-write
This parameter is used to define the NTP time to offset, in seconds. Default = 0 Range = -43200 to +43200 seconds. Access: Instant. AC INI-Param: NTPServerUTCOffset
                   acSysNTPUpdateInterval 1.3.6.1.4.1.5003.9.10.10.1.3.3.3 unsigned32 read-write
This parameter defines the NTP update interval, in seconds. It's inadvisable to set it exceeding 1 month (2592000 seconds). Range = 0 to 2592000 seconds Default = 86400 seconds. Access: Instant. AC INI-Param: NTPUpdateInterval
                   acSysDayLightSavingTime 1.3.6.1.4.1.5003.9.10.10.1.3.3.21
                         acSysDayLightSavingTimeMode 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.1 integer read-write
Determines whether to enable the time ajustment to day light saving time while update time from NTP server. Access: Instant. AC INI-Param: DayLightSavingTimeEnable Enumeration: 'enable': 1, 'disable': 0.
                         acSysDayLightSavingTimeOffset 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.2 unsigned32 read-write
when DayLightSavingTimeEnable is Enable, this parametes determine the fix size in minutes: 0-120. Access: Instant. AC INI-Param: DayLightSavingTimeOffset
                         acSysDayLightSavingTimeStart 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.3 snmpadminstring read-write
This parameter defines the date and time of starting day light time in current year. Format mo:dd:hh:mm. Access: Instant. AC INI-Param: DayLightSavingTimeStart
                         acSysDayLightSavingTimeEnd 1.3.6.1.4.1.5003.9.10.10.1.3.3.21.4 snmpadminstring read-write
This parameter defines the date and time of ending day light time in current year. Format mo:dd:hh:mm. Access: Instant. AC INI-Param: DayLightSavingTimeEnd
               acSysWEB 1.3.6.1.4.1.5003.9.10.10.1.3.4
                   acSysWEBConfigDisable 1.3.6.1.4.1.5003.9.10.10.1.3.4.1 integer read-write
Enables or disables Web Configuration. 0 = Read & Write mode (default) 1 = Read Only mode. Access: Offline. AC INI-Param: DISABLEWEBCONFIG Enumeration: 'enable': 0, 'disable': 1.
                   acSysWEBHTTPSOnly 1.3.6.1.4.1.5003.9.10.10.1.3.4.2 integer read-write
Use this parameter to allow only HTTPS connections (force security). When set to 1, unencrypted HTTP (normally, port 80) is blocked. Access: Offline. AC INI-Param: HTTPSOnly Enumeration: 'enable': 1, 'disable': 0.
                   acSysWEBHTTPSPort 1.3.6.1.4.1.5003.9.10.10.1.3.4.3 unsigned32 read-write
Determine the local Secure HTTPS port of the device. The default port is 443. Range = 1-65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: HTTPSPORT
                   acSysWEBWebUseRadiusLogin 1.3.6.1.4.1.5003.9.10.10.1.3.4.4 integer read-write
Uses the RADIUS (Remote Authentication Dial-In User Server/Service) for Web interface authentication. Make sure that ENABLERADIUS is on. Use of this parameter without HTTPSONLY = 1 is not recommended. Access: Instant. AC INI-Param: WEBRADIUSLOGIN Enumeration: 'enable': 1, 'disable': 0.
                   acSysWEBHTTPSCipherString 1.3.6.1.4.1.5003.9.10.10.1.3.4.5 snmpadminstring read-write
Requires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSCipherString
                   acSysWEBDenyAuthenticationTimer 1.3.6.1.4.1.5003.9.10.10.1.3.4.6 unsigned32 read-write
Defines the time the next authentication attempt from the last authentication faild IP should be denied. The range can be any value from 0 - 86400 in seconds. Access: Online. AC INI-Param: DenyAuthenticationTimer
                   acSysWEBWanHttpPort 1.3.6.1.4.1.5003.9.10.10.1.3.4.7 unsigned32 read-write
Determines the WAN HTTP port of the device. If set to 0, WAN HTTP access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpPort
                   acSysWEBWanHttpsPort 1.3.6.1.4.1.5003.9.10.10.1.3.4.8 unsigned32 read-write
Determines the WAN HTTPS port of the device. If set to 0, WAN HTTPS access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpsPort
                   acSysWEBACLTable 1.3.6.1.4.1.5003.9.10.10.1.3.4.21 no-access
Access control list for the WEB.
                         acSysWEBACLEntry 1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1 no-access
                             acSysWEBACLIndex 1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.1 unsigned32 read-only
WEB ACL (Access Control List) index. AC INI-Param: N/A
                             acSysWEBACLIP 1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.2 ipaddress read-write
Allows IP addresses to connect to the Web interface. Set to zeroes to allow all IP addresses. Range: Valid IP address . Access: Instant. AC INI-Param: WEBACCESSLIST
               acSysWEBAccess 1.3.6.1.4.1.5003.9.10.10.1.3.5
                   acSysWEBAccessTable 1.3.6.1.4.1.5003.9.10.10.1.3.5.1 no-access
                       acSysWEBAccessEntry 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1 no-access
                           acSysWEBAccessRowStatus 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.1 unsigned32 read-write
WEB Basic row-status. AC INI-Param: WEBAccessRowStatus
                           acSysWEBAccessAction 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.2 unsigned32 read-only
WEB Access action. AC INI-Param: WEBAccessAction
                           acSysWEBAccessActionResult 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.3 unsigned32 read-only
WEB Access action result. AC INI-Param: N/A
                           acSysWEBAccessIndex 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.4 integer read-only
WEB Access index. AC INI-Param: N/A Enumeration: 'administrator': 0, 'monitoringLevel': 1.
                           acSysWEBAccessUserName 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.5 snmpadminstring read-only
WEB Basic user name. Range = String[26]. Access: Instant. AC INI-Param: WEBAccessUserName
                           acSysWEBAccessUserCode 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.6 snmpadminstring read-only
WEB Basic userAccess. Access: Instant. AC INI-Param: WEBAccessUserCode
                           acSysWEBAccessWebAuthMode 1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.7 integer read-only
Selects HTTP basic (clear text) or digest (MD5) authentication for the web interface. When set to 0, basic authentication (clear text) will be used. When set to 1, digest authentication (MD5) will be used. When set to 2, digest authentication (MD5) will be used for HTTP, while basic authentication will be used for HTTPS. Note that turning on RADIUS login forces basic authentication. Access: Instant. AC INI-Param: WebAuthMode Enumeration: 'digestModeWhenPossible': 1, 'digestModeHTTPOnly': 2, 'basicMode': 0.
               acSysNATTraversal 1.3.6.1.4.1.5003.9.10.10.1.3.6
                   acSysSTUN 1.3.6.1.4.1.5003.9.10.10.1.3.6.21
                         acSysSTUNEnable 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.1 integer read-write
This parameter is used to enable the STUN module, used for NAT traversal of UDP packets. Access: Offline. AC INI-Param: ENABLESTUN Enumeration: 'enable': 1, 'disable': 0.
                         acSysSTUNPrimaryServerIP 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.2 ipaddress read-write
Defines the primary STUN Server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERPRIMARYIP
                         acSysSTUNSecondaryServerIP 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.3 ipaddress read-write
Defines the secondary STUN server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERSECONDARYIP
                         acSysSTUNBindingLifeTime 1.3.6.1.4.1.5003.9.10.10.1.3.6.21.4 unsigned32 read-write
This parameter is used to define the NAT binding lifetime, in seconds. STUN refreshes the binding information after this time expires. Range = 0 - 2592000. Access: Offline. AC INI-Param: NATBINDINGDEFAULTTIMEOUT
               acSysTelnet 1.3.6.1.4.1.5003.9.10.10.1.3.7
                   acSysTelnetServerEnable 1.3.6.1.4.1.5003.9.10.10.1.3.7.1 integer read-write
Enables or disables the embedded Telnet server. Telnet is disabled by default for security reasons. 0 = Disable 1= Enable 2 = SSL mode (if available - requires an SSL-aware Telnet client software) SSL mode is not available on the MP-108 / MP-124 media gateways. Access: Instant. AC INI-Param: TelnetServerEnable Enumeration: 'ssl': 2, 'enable': 1, 'disable': 0.
                   acSysTelnetServerPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.2 unsigned32 read-write
Defines the port number for the embedded Telnet server. Range = Valid port number. Access: Online. AC INI-Param: TELNETSERVERPORT
                   acSysTelnetServerIdleDisconnect 1.3.6.1.4.1.5003.9.10.10.1.3.7.3 unsigned32 read-write
This parameter is used to set the timeout for disconnection of an idle Telnet session (minutes). When set to zero, idle sessions are not disconnected. Range: Any number. Access: Offline. AC INI-Param: TelnetServerIdleDisconnect
                   acSysTelnetSSHServerPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.4 unsigned32 read-write
Defines the port number for the embedded SSH server. Range = Valid port number. Access: Online. AC INI-Param: SSHServerPort
                   acSysTelnetSSHServerEnable 1.3.6.1.4.1.5003.9.10.10.1.3.7.5 integer read-write
Enables or disables the embedded SSH server. 0 = Disable 1= Enable . Access: Online. AC INI-Param: SSHServerEnable Enumeration: 'enable': 1, 'disable': 0.
                   acSysTelnetSSHAdminKey 1.3.6.1.4.1.5003.9.10.10.1.3.7.6 snmpadminstring read-write
This parameter holds an RSA public key for strong authentication to the SSH interface (if enabled). The value should be a base64-encoded string see the Security appendix for additional information. Access: Instant. AC INI-Param: SSHAdminKey
                   acSysTelnetSSHRequirePublicKey 1.3.6.1.4.1.5003.9.10.10.1.3.7.7 integer read-write
Enables or disables RSA public keys in SSH. When set to 0, RSA public keys are optional (if SSHAdminKey is set). When set to 1, RSA public keys are mandatory. Access: Instant. AC INI-Param: SSHRequirePublicKey Enumeration: 'enable': 1, 'disable': 0.
                   acSysTelnetServerWanPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.8 unsigned32 read-write
Determines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtTelnetPort
                   acSysTelnetWanSSHServerPort 1.3.6.1.4.1.5003.9.10.10.1.3.7.9 unsigned32 read-write
Determines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtSSHPort
               acSysHTTPClient 1.3.6.1.4.1.5003.9.10.10.1.3.8
                   acSysHTTPClientAutoUpdatePredefinedTime 1.3.6.1.4.1.5003.9.10.10.1.3.8.1 snmpadminstring read-write
Schedules an automatic update to a predefined time of the day. The range is 'HH:MM' (24-hour format). For example: 20:18 . Access: Offline. AC INI-Param: AutoUpdatePredefinedTime
                   acSysHTTPClientAutoUpdateFrequency 1.3.6.1.4.1.5003.9.10.10.1.3.8.2 unsigned32 read-write
Determines the number of minutes the gateway waits between automatic updates. The default value is 0 (the update at fixed intervals mechanism is disabled). Range: Any number . Access: Offline. AC INI-Param: AutoUpdateFrequency
                   acSysHTTPClientAutoUpdateCmpFile 1.3.6.1.4.1.5003.9.10.10.1.3.8.3 integer read-write
Enables / disables the automatic update mechanism for the cmp file. 0 = The automatic update mechanism doesn't apply to the cmp file (default). 1 = The automatic update mechanism includes the cmp file. Access: Offline. AC INI-Param: AutoUpdateCmpFile Enumeration: 'enable': 1, 'disable': 0.
                   acSysHTTPClientCmpFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.4 snmpadminstring read-write
This parameter provides a link to a software image (CMP file) to be downloaded from a remote server. . Access: Offline. AC INI-Param: CmpFileURL
                   acSysHTTPClientIniFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.5 snmpadminstring read-write
This parameter provides a link to an ini file to be downloaded from a remote server. . Access: Offline. AC INI-Param: IniFileURL
                   acSysHTTPClientIniFileTemplateURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.6 snmpadminstring read-write
Provides a link to an ini file to be downloaded from a remote server, in addition to IniFileUrl. Range = http://server_name/file, https://server_name/file. Access: Offline. AC INI-Param: IniFileTemplateUrl
                   acSysHTTPClientCPTFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.7 snmpadminstring read-write
Provides a link to a Call Progress Tones (CPT) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: CptFileUrl
                   acSysHTTPClientVPFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.8 snmpadminstring read-write
Provides a link to a Voice Prompts file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: VpFileUrl
                   acSysHTTPClientPRTFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.9 snmpadminstring read-write
Provides a link to a prerecorded tones dat file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: PrtFileUrl
                   acSysHTTPClientFXSCoeffFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.10 snmpadminstring read-write
Provides a link to an FXS coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXSCoeffFileUrl
                   acSysHTTPClientFXOCoeffFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.11 snmpadminstring read-write
Provides a link to an FXO coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXOCoeffFileUrl
                   acSysHTTPClientCASFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.12 snmpadminstring read-write
Provides a link to a Channel Associated Signaling (CAS) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: CasFileUrl
                   acSysHTTPClientXMLFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.13 snmpadminstring read-write
Provides a link to an XML segments file, to be downloaded from a remote server. See the chapter 'Automatic Update Facility' for supported URL options. Access: Instant. AC INI-Param: APSSegmentsFileUrl
                   acSysHTTPClientCoderTableFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.14 snmpadminstring read-write
Provides a link to a coder table (CTBL) file that is to be downloaded from a remote server. . Access: Instant. AC INI-Param: CoderTableFileUrl
                   acSysHTTPClientUserInfoFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.15 snmpadminstring read-write
Provides a link to the user information file, to be downloaded using Automatic Update. Relevant only for H323 or SIP controlled devices. Access: Offline. AC INI-Param: UserInfoFileUrl
                   acSysHTTPClientDialPlanFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.16 snmpadminstring read-write
URL for downloading a Dial Plan file using the Automatic Update facility. Access: Instant. AC INI-Param: DialPlanFileUrl
                   acSysHTTPClientTLSPkeyFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.17 snmpadminstring read-write
URL for downloading a TLS private key file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSPkeyFileUrl
                   acSysHTTPClientTLSCertFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.18 snmpadminstring read-write
URL for downloading a TLS certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSCertFileUrl
                   acSysHTTPClientTLSRootFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.19 snmpadminstring read-write
URL for downloading a TLS trusted root certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSRootFileUrl
                   acSysHTTPClientWebLogoFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.20 snmpadminstring read-write
URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Offline. AC INI-Param: WebLogoFileUrl
                   acSysHTTPClientVideoFontFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.21 snmpadminstring read-write
Indicates the URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Offline. AC INI-Param: VideoFontFileUrl
                   acSysHTTPClientV5PortConfFileURL 1.3.6.1.4.1.5003.9.10.10.1.3.8.22 snmpadminstring read-write
Provides a link to a software (V5PortConfiguration file) to be downloaded from a remote server. Access: Instant. AC INI-Param: V5PortConfigurationFileURL
                   acSysHTTPClientDataConfigurationFileUrl 1.3.6.1.4.1.5003.9.10.10.1.3.8.23 snmpadminstring read-write
Provides a link to a data configuration file to be downloaded from a remote server using the Automatic Update facility. Access: Instant. AC INI-Param: RGCONFFILEURL
               acSysSNMP 1.3.6.1.4.1.5003.9.10.10.1.3.9
                   acSysSNMPKeepAliveTrapPort 1.3.6.1.4.1.5003.9.10.10.1.3.9.1 unsigned32 read-write
The port to which the keep alive traps are sent to. Access: Instant. AC INI-Param: KeepAliveTrapPort
                   acSysSNMPEmsColdStrartIndication 1.3.6.1.4.1.5003.9.10.10.1.3.9.2 unsigned32 read-write
EMS object to be used as indication to the device's state in the 'eyes' of the EMS. Default - 0. Access: Instant. AC INI-Param: N/A
                   acSysSNMPWanPort 1.3.6.1.4.1.5003.9.10.10.1.3.9.3 unsigned32 read-write
This parameter specifies the WAN port number for SNMP requests and responses. If set to 0, WAN access to SNMP is disabled. Range = 0 to 65535. Access: Offline. AC INI-Param: WanMgmtSnmpPort
               acSysVLAN 1.3.6.1.4.1.5003.9.10.10.1.3.10
                     acSysVLANOamVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.1 unsigned32 read-write
Sets the OAMP (Operation, Administration, Management and Provisioning) VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANOAMVLANID
                     acSysVLANControlVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.2 unsigned32 read-write
Sets the control VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANCONTROLVLANID
                     acSysVLANMediaVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.3 unsigned32 read-write
Sets the media VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANMEDIAVLANID
                     acSysVLANNetworkServiceClassPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.4 unsigned32 read-write
This parameter is used to set the priority for Network service class content. Range = 0 to 7 Default = 7. Access: Online. AC INI-Param: VLANNETWORKSERVICECLASSPRIORITY
                     acSysVLANPremiumServiceClassMediaPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.5 unsigned32 read-write
Sets the priority for the Premium service class content and media traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITY
                     acSysVLANGoldServiceClassPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.6 unsigned32 read-write
Sets the priority for the Gold service class content. Range = 0 to 7 Default = 4. Access: Online. AC INI-Param: VLANGOLDSERVICECLASSPRIORITY
                     acSysVLANBronzeServiceClassPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.7 unsigned32 read-write
Sets the priority for the Bronze service class content. Range = 0 to 7 Default = 2. Access: Online. AC INI-Param: VLANBRONZESERVICECLASSPRIORITY
                     acSysVLANPremiumServiceClassControlPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.8 unsigned32 read-write
Sets the priority for the Premium service class content and control traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITY
                     acSysVLANNetworkServiceClassDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.9 unsigned32 read-write
This parameter is used to set the DiffServ for Network service class content. Range = 0 to 63 Default = 48. Access: Online. AC INI-Param: NETWORKSERVICECLASSDIFFSERV
                     acSysVLANPremiumServiceClassMediaDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.10 unsigned32 read-write
This parameter is used to set the DiffServ for Premium service class content and media traffic. Range = 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERV
                     acSysVLANPremiumServiceClassControlDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.11 unsigned32 read-write
Sets the DiffServ for the Premium service class content and control traffic. Range: 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERV
                     acSysVLANGoldServiceClassDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.12 unsigned32 read-write
Sets the DiffServ for the Gold service class content. Range = 0 to 63 Default = 26. Access: Online. AC INI-Param: GOLDSERVICECLASSDIFFSERV
                     acSysVLANBronzeServiceClassDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.13 unsigned32 read-write
Sets the DiffServ for the Bronze service class content. Range = 0 to 63 Default = 10. Access: Online. AC INI-Param: BRONZESERVICECLASSDIFFSERV
                     acSysVLANVlanNativeVlanId 1.3.6.1.4.1.5003.9.10.10.1.3.10.14 unsigned32 read-write
Sets the native VLAN identifier. Access: Online. AC INI-Param: VLANNATIVEVLANID
                     acSysVLANMode 1.3.6.1.4.1.5003.9.10.10.1.3.10.15 unsigned32 read-write
Sets the VLAN functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: VLANMODE
                     acSysVlanMapTable 1.3.6.1.4.1.5003.9.10.10.1.3.10.21 no-access
                           acSysVlanMapEntry 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1 no-access
                               acSysVlanMapIndex 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.1 unsigned32 no-access
Index Field for line. Internal parameter. AC INI-Param: DiffServToVlanPriority_Index
                               acSysVlanMapRowStatus 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.2 rowstatus read-only
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
                               acSysVlanMapAction 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.3 integer read-only
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A Enumeration: 'none': 0.
                               acSysVlanMapActionRes 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.4 integer read-only
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A Enumeration: 'succeeded': 0.
                               acSysVlanMapDiffServ 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.5 unsigned32 read-only
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_DiffServ
                               acSysVlanMapVlanPriority 1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.6 unsigned32 read-only
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_VlanPriority
               acSysSCTP 1.3.6.1.4.1.5003.9.10.10.1.3.11
                     acSysSCTPHeartBeatInterval 1.3.6.1.4.1.5003.9.10.10.1.3.11.1 unsigned32 read-write
Defines the SCTP heartbeat interval. Range: 1 to 3600. Access: Offline. AC INI-Param: SCTPHBInterval
                     acSysSCTPT4SACKTimer 1.3.6.1.4.1.5003.9.10.10.1.3.11.2 unsigned32 read-write
Defines the SCTP T4 SACK timer interval. Range: 1 to 5. Access: Offline. AC INI-Param: SCTPT4SAckTimer
                     acSysSCTPCheckSumMethod 1.3.6.1.4.1.5003.9.10.10.1.3.11.3 integer read-write
Stream Control Transmission Protocol (SCTP) uses a checksum mechanism in order to authenticate packets on both sides (the receiving side and the transmitting side). Presently, two checksum mechanisms are available: 0 = adler32 checksum mechanism 1 = crc32c checksum mechanism (improved mechanism). Access: Offline. AC INI-Param: SCTPChecksumMethod Enumeration: 'crc': 1, 'adler': 0.
                     acSysSCTPHostName 1.3.6.1.4.1.5003.9.10.10.1.3.11.4 snmpadminstring read-write
When this parameter is set to any value other than an empty string, SCTP (Stream Control Transmission Protocol) uses the value as the value of the FQDN (Fully Qualified Domain Name) parameter attached to the INIT chunk. In this case, the FQDN parameter replaces any IP address parameters in the INIT chunk. This feature enables overcoming NAT problems where the original IP addresses belonging to the endpoint supports are converted into pseudo addresses. When this parameter is not set (default), the INIT chunk is sent without any FQDN parameter. Range = String[42]. Access: Offline. AC INI-Param: SCTPHOSTNAME
                     acSysSCTPAssociationsNum 1.3.6.1.4.1.5003.9.10.10.1.3.11.5 unsigned32 read-write
Defines the maximum number of Stream Control Transmission Protocol (SCTP) associations that can be opened. Range: 1 to 8. Access: Offline. AC INI-Param: SCTPAssociationsNum
               acSysEthernetPort 1.3.6.1.4.1.5003.9.10.10.1.3.12
                     acSysEthernetPortPhyConfiguration 1.3.6.1.4.1.5003.9.10.10.1.3.12.1 integer read-write
Controls the Ethernet connection mode type. Auto-negotiate falls back to Half-Duplex mode (HD) when the opposite port is not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX) in this mode is always configured correctly. 0 = 10 Base-T half-duplex 1 = 10 Base-T full-duplex 2 = 100 Base-TX half-duplex 3 = 100 Base-TX full-duplex 4 = Auto-negotiate. Access: Offline. AC INI-Param: EthernetPhyConfiguration Enumeration: 'fullDuplex10BaseT': 1, 'autoNegotiate': 4, 'fullDuplex1000BaseT': 7, 'halfDuplex100BaseT': 2, 'fullDuplex100BaseT': 3, 'halfDuplex10BaseT': 0.
           acSysMiscConfig 1.3.6.1.4.1.5003.9.10.10.1.4
               acSysDiagnostics 1.3.6.1.4.1.5003.9.10.10.1.4.1
                   acSysDiagnosticsEnable 1.3.6.1.4.1.5003.9.10.10.1.4.1.1 integer read-write
Checks the correct functionality of the different hardware components on the board. On completion of the check, the board sends an EV_END_BIT value, which contains information on the test results of each hardware component. 0 = No diagnostics (default) 1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY and Flash) 2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY, but partial, test of Flash, a quicker mode). Access: Offline. AC INI-Param: ENABLEDIAGNOSTICS Enumeration: 'builtInTest': 1, 'builtInTestWithSDRAM': 3, 'builtInTestOnUtopiaVxb': 4, 'disabled': 0, 'internalUse': 99, 'builtInTestwithPartialFlash': 2.
                   acSysDiagnosticsEnablePerformanceThresholdAlarms 1.3.6.1.4.1.5003.9.10.10.1.4.1.2 integer read-write
This parameter enables sending SNMP traps and Syslog messages when performance of the device is degraded (according to the configured thresholds). Access: Instant. AC INI-Param: PM_EnableThresholdAlarms Enumeration: 'enable': 1, 'disable': 0.
                   acSysDiagnosticsListOfActivitiesToLog 1.3.6.1.4.1.5003.9.10.10.1.4.1.3 snmpadminstring read-write
This parameter defines what activities are to be reported by the device in the form of a log message. Parameter format is x,y,z-... where x,y,z are activity codes to be reported by the device. Supported activity codes: PVC - Parameter Value Changes. AFL - Auxiliary Files Loading. DR - Device Reset. FB - Flash Burning. SWU - SoftWareUpdate. ARD - Access to Restricted Domains. NAA - Non Authorized Access. SPC - Sensitive Parameters Changes. Access: Online. AC INI-Param: ActivityListToLog
               acSysGenericINI 1.3.6.1.4.1.5003.9.10.10.1.4.2
                   acSysGenericINILine 1.3.6.1.4.1.5003.9.10.10.1.4.2.1 snmpadminstring read-write
Flexible INI file line. Access: Offline. AC INI-Param: N/A
                   acSysGenericINISecureStartup 1.3.6.1.4.1.5003.9.10.10.1.4.2.2 integer read-write
Enables or disables secure startup mode. In this mode, downloading of the INI file is restricted to a URL provided in prior configuration (see parameter IniFileURL) or via DHCP. Access: Offline. AC INI-Param: EnableSecureStartup Enumeration: 'enable': 1, 'disable': 0.
           acSysLicenseKey 1.3.6.1.4.1.5003.9.10.10.1.5
               acSysLicenseKeyString 1.3.6.1.4.1.5003.9.10.10.1.5.1 snmpadminstring read-write
Coded Key specific for board and required features. Access: Offline. AC INI-Param: N/A
               acSysLicenseKeyActiveList 1.3.6.1.4.1.5003.9.10.10.1.5.2 snmpadminstring read-only
List of all avtivated features. AC INI-Param: N/A
           acSysFile 1.3.6.1.4.1.5003.9.10.10.1.6
               acSysFileCpt 1.3.6.1.4.1.5003.9.10.10.1.6.1 snmpadminstring read-only
Defines Call Progress Tone filenames (downloaded by TFTP). AC INI-Param: CALLPROGRESSTONESFILENAME
               acSysFileVp 1.3.6.1.4.1.5003.9.10.10.1.6.2 snmpadminstring read-only
Defines the name (and path) of the file containing the Voice Prompts. Range = String of ASCII characters. AC INI-Param: VOICEPROMPTSFILENAME
               acSysFilePrerecordedTones 1.3.6.1.4.1.5003.9.10.10.1.6.3 snmpadminstring read-only
Defines the name (and path) of the file containing the Prerecorded Tones. Range = String of ASCII characters. AC INI-Param: PrerecordedTonesFileName
               acSysFileXml 1.3.6.1.4.1.5003.9.10.10.1.6.4 snmpadminstring read-only
This parameter is used to indicate the name of the file containing the XML file. AC INI-Param: XMLFileName
               acSysFileExternalCoder 1.3.6.1.4.1.5003.9.10.10.1.6.5 snmpadminstring read-only
Coders table file name. AC INI-Param: CODERTBLFILENAME
               acSysFileUserInfo 1.3.6.1.4.1.5003.9.10.10.1.6.6 snmpadminstring read-only
The file name to be loaded. AC INI-Param: N/A
               acSysFileDialPlanFileName 1.3.6.1.4.1.5003.9.10.10.1.6.7 snmpadminstring read-only
This parameter is used to indicate the name of the file containing the Dial Plan. AC INI-Param: gDialPlanFileName
               acSysFileTLSPkeyFileName 1.3.6.1.4.1.5003.9.10.10.1.6.8 snmpadminstring read-only
This parameter defines the name of a private key file (internal). Set to blank to regenerate the key and certificate. AC INI-Param: HTTPSPkeyFileName
               acSysFileTLSCertFileName 1.3.6.1.4.1.5003.9.10.10.1.6.9 snmpadminstring read-only
Defines the name of the HTTPS server certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSCertFileName
               acSysFileTLSRootFileName 1.3.6.1.4.1.5003.9.10.10.1.6.10 snmpadminstring read-only
Defines the name of the HTTPS trusted root certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSRootFileName
               acSysFileFirstVideoFontFileName 1.3.6.1.4.1.5003.9.10.10.1.6.11 snmpadminstring read-only
Indicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleName
               acSysFileSecondVideoFontFileName 1.3.6.1.4.1.5003.9.10.10.1.6.12 snmpadminstring read-only
Indicates the name of the second file containing the Video Font file index. AC INI-Param: VideoFontFIleName
               acSysFileThirdVideoFontFileName 1.3.6.1.4.1.5003.9.10.10.1.6.13 snmpadminstring read-only
Indicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleName
               acSysFileV5PortConfFileName 1.3.6.1.4.1.5003.9.10.10.1.6.14 snmpadminstring read-only
Indicates the name and location of the V5 Port Configuration file. AC INI-Param: V5PortConfigurationFileName
           acSysSecurity 1.3.6.1.4.1.5003.9.10.10.1.7
               acSysSecurityTLSVersion 1.3.6.1.4.1.5003.9.10.10.1.7.1 unsigned32 read-write
This parameter defines the supported versions of SSL/TLS. When set to 0, SSL/TLS handshakes always start with SSL 2.0 and switch to TLS 1.0 if both peers support it. When set to 1, TLS 1.0 is the only version supported clients attempting to contact the device using SSL 2.0 will be rejected. Possible values: 0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default) 1 = TLS 1.0 will always be used. Access: Offline. AC INI-Param: TLSVersion
               acSysSecurityOcspEnable 1.3.6.1.4.1.5003.9.10.10.1.7.2 integer read-write
Enables or disables certificate checking via OCSP. Access: Instant. AC INI-Param: OcspEnable Enumeration: 'disabled': 0, 'enabled': 1.
               acSysSecurityOcspServerIPType 1.3.6.1.4.1.5003.9.10.10.1.7.3 inetaddresstype read-write
This parameter defines the OCSP server's IP address Type. Currently - IPv4 only. Access: Instant. AC INI-Param: N/A
               acSysSecurityOcspServerIP 1.3.6.1.4.1.5003.9.10.10.1.7.4 inetaddress read-write
This parameter defines the OCSP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspServerIP
               acSysSecurityOcspServerPort 1.3.6.1.4.1.5003.9.10.10.1.7.5 unsigned32 read-write
This parameter defines the OCSP server's TCP port number. Range = 1 to 32767 . Access: Instant. AC INI-Param: OcspServerPort
               acSysSecurityOcspDefaultResponse 1.3.6.1.4.1.5003.9.10.10.1.7.6 integer read-write
Determines default OCSP behavior when the server cannot be contacted. 0 = reject peer certificate. 1 = allow peer certificate. . Access: Instant. AC INI-Param: OcspDefaultResponse Enumeration: 'rejectPeerCertificate': 0, 'allowPeerCertificate': 1.
               acSysSecurityTLSFIPS140Mode 1.3.6.1.4.1.5003.9.10.10.1.7.7 integer read-write
Determines whether to enable the FIPS140 mode for TLS. Access: Offline. AC INI-Param: TLS_Fips140_Mode Enumeration: 'disabled': 0, 'enabled': 1.
               acSysSecurityGenCsrSubjectName 1.3.6.1.4.1.5003.9.10.10.1.7.8 snmpadminstring read-write
generate CSR Subject Name. Access: Instant. AC INI-Param: N/A
               acSysSecuritySelfSignedCertificateSubjectName 1.3.6.1.4.1.5003.9.10.10.1.7.9 snmpadminstring read-write
Access: Instant. AC INI-Param: N/A
               acSysSecurityOcspSecondaryServerIPType 1.3.6.1.4.1.5003.9.10.10.1.7.10 inetaddresstype read-write
This parameter defines the OCSP secondary server's IP address Type. Currently - IPv4 only. Access: Instant. AC INI-Param: N/A
               acSysSecurityOcspSecondaryServerIP 1.3.6.1.4.1.5003.9.10.10.1.7.11 inetaddress read-write
This parameter defines the OCSP secondary server IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspSecondaryServerIP
               acSysSecurityHTTPSRequireClientCertificate 1.3.6.1.4.1.5003.9.10.10.1.7.12 integer read-write
Requires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSRequireClientCertificate Enumeration: 'enable': 1, 'disable': 0.
               acSysSecurityAUPDVerifyCertificates 1.3.6.1.4.1.5003.9.10.10.1.7.13 integer read-write
This parameter configures the AutoUpdate facility to verify server certificates when using HTTPS. Access: Offline. AC INI-Param: AUPDVerifyCertificates Enumeration: 'enable': 1, 'disable': 0.
               acSysIKE 1.3.6.1.4.1.5003.9.10.10.1.7.21
                     acSysIKEPolicyTable 1.3.6.1.4.1.5003.9.10.10.1.7.21.1 no-access
                         acSysIKEPolicyEntry 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1 no-access
                             acSysIKEPolicyIndex 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.1 unsigned32 no-access
This parameter is used for the Internet Key Encryption (IKE) Index Field for line. Internal parameter. AC INI-Param: IKE_DB_INDEX
                             acSysIKEPolicyRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.2 rowstatus read-only
This parameter is used for the Internet Key Encryption (IKE) ROWSTATUS Field for line. Internal parameter. AC INI-Param: IKE_DB_ROWSTATUS
                             acSysIKEPolicyAction 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.3 integer read-only
This parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: IKE_DB_ACTION Enumeration: 'none': 0.
                             acSysIKEPolicyActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.4 integer read-only
This parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: IKE_DB_ACTION_RESULT Enumeration: 'succeeded': 0.
                             acSysIKEPolicyShardKey 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.5 snmpadminstring read-only
IKE Policy - Shared Key. Access: Instant. AC INI-Param: IKEPOLICYSHAREDKEY
                             acSysIKEPolicyLifeInSeconds 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.6 unsigned32 read-only
IKE Policy - IKE SA LifeTime in seconds. Access: Instant. AC INI-Param: IKEPOLICYLIFEINSEC
                             acSysIKEPolicyLifeInKB 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.7 unsigned32 read-only
IKE Policy - IKE SA LifeTime in KB. Access: Instant. AC INI-Param: IKEPOLICYLIFEINKB
                             acSysIKEPolicyProposal0Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.8 integer read-only
IKE Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0 Enumeration: 'aES': 3, 'not-set': 10, 'triple-DES-CBC': 2, 'dES-CBC': 1.
                             acSysIKEPolicyProposal1Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.9 integer read-only
IKE Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1 Enumeration: 'aES': 3, 'not-set': 10, 'triple-DES-CBC': 2, 'dES-CBC': 1.
                             acSysIKEPolicyProposal2Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.10 integer read-only
IKE Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2 Enumeration: 'aES': 3, 'not-set': 10, 'triple-DES-CBC': 2, 'dES-CBC': 1.
                             acSysIKEPolicyProposal3Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.11 integer read-only
IKE Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3 Enumeration: 'aES': 3, 'not-set': 10, 'triple-DES-CBC': 2, 'dES-CBC': 1.
                             acSysIKEPolicyProposal0Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.12 integer read-only
IKE Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                             acSysIKEPolicyProposal1Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.13 integer read-only
IKE Policy - Proposal 1 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                             acSysIKEPolicyProposal2Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.14 integer read-only
IKE Policy - Proposal 2 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                             acSysIKEPolicyProposal3Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.15 integer read-only
IKE Policy - Proposal 3 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                             acSysIKEPolicyProposal0DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.16 integer read-only
IKE Policy - Proposal 0 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0 Enumeration: 'dH-1024-BIT': 1, 'not-set': 10, 'dH-786-BIT': 0.
                             acSysIKEPolicyProposal1DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.17 integer read-only
IKE Policy - Proposal 1 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1 Enumeration: 'dH-1024-BIT': 1, 'not-set': 10, 'dH-786-BIT': 0.
                             acSysIKEPolicyProposal2DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.18 integer read-only
IKE Policy - Proposal 2 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2 Enumeration: 'dH-1024-BIT': 1, 'not-set': 10, 'dH-786-BIT': 0.
                             acSysIKEPolicyProposal3DHGroup 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.19 integer read-only
IKE Policy - Proposal 3 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3 Enumeration: 'dH-1024-BIT': 1, 'not-set': 10, 'dH-786-BIT': 0.
                             acSysIKEPolicyAuthenticationMethod 1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.20 integer read-only
This parameter is used for Internet Key Encryption (IKE) Policy - IKE Authentication Method (Preshared key/ RSA). Access: Offline. AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD Enumeration: 'presharedKey': 0, 'rsaSignature': 1.
               acSysIPSec 1.3.6.1.4.1.5003.9.10.10.1.7.22
                     acSysIPSecEnable 1.3.6.1.4.1.5003.9.10.10.1.7.22.1 integer read-write
IPsec Enable flag. Access: Offline. AC INI-Param: ENABLEIPSEC Enumeration: 'yes': 1, 'no': 0.
                     acSysIPSecDpdMode 1.3.6.1.4.1.5003.9.10.10.1.7.22.2 integer read-write
IPsec Dead Peer Detection (RFC 3706) - Mode of Operation. One of the following values: '0' - Disabled (Default) '1' - Periodic '2' - On demand. Access: Instant. AC INI-Param: IPSECDPDMODE Enumeration: 'disabled': 0, 'periodic': 1, 'ondemand': 2.
                     acSysIPSecIKECertificateExtValidate 1.3.6.1.4.1.5003.9.10.10.1.7.22.3 integer read-write
Enables or disables certificate extension checking for IKE. Access: Instant. AC INI-Param: IKEcertificateExtValidate Enumeration: 'disabled': 0, 'enabled': 1.
                     acSysIPSecSPDTable 1.3.6.1.4.1.5003.9.10.10.1.7.22.21 no-access
                           acSysIPSecSPDEntry 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1 no-access
                               acSysIPSecSPDIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.1 unsigned32 no-access
Security Policy Database (SPD) Index Field for line. Internal parameter. AC INI-Param: SPD_INDEX
                               acSysIPSecSPDRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.2 rowstatus read-only
Security Policy Database (SPD) ROWSTATUS field for line. Internal parameter. AC INI-Param: SPD_ROWSTATUS
                               acSysIPSecSPDAction 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.3 integer read-only
Security Policy Database (SPD) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: SPD_ACTION Enumeration: 'none': 0.
                               acSysIPSecSPDActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.4 integer read-only
Security Policy Database (SPD) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: SPD_ACTION_RESULT Enumeration: 'succeeded': 0.
                               acSysIPSecSPDPolicyRemoteIPAddr 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.5 snmpadminstring read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Remote IP address as IP or Host Name. Access: Instant. AC INI-Param: IPSECPOLICYREMOTEIPADDRESS
                               acSysIPSecSPDPolicySrcPort 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.6 unsigned32 read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Source Port. Access: Instant. AC INI-Param: IPSECPOLICYSRCPORT
                               acSysIPSecSPDPolicyDestPort 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.7 unsigned32 read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Destination Port. Access: Instant. AC INI-Param: IPSECPOLICYDSTPORT
                               acSysIPSecSPDPolicyProtocol 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.8 unsigned32 read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Protocol. Access: Instant. AC INI-Param: IPSECPOLICYPROTOCOL
                               acSysIPSecSPDKeyExchangeMethodIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.9 unsigned32 read-only
This parameter is used for the Secure Internet Protocol (IPsec) Policy - Index into the Key Exchange Method Table (IKE Table). Access: Offline. AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX
                               acSysIPSecSPDLifeInSeconds 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.10 unsigned32 read-only
IPsec Policy - IPSec SA LifeTime in seconds. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINSEC
                               acSysIPSecSPDLifeInKB 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.11 unsigned32 read-only
IPsec Policy - IPSec SA LifeTime in KB. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINKB
                               acSysIPSecSPDProposal0Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.12 integer read-only
IPsec Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0 Enumeration: 'none': 0, 'not-set': 10, 'triple-DES-CBC': 2, 'aES': 3, 'dES-CBC': 1.
                               acSysIPSecSPDProposal1Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.13 integer read-only
IPsec Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1 Enumeration: 'none': 0, 'not-set': 10, 'triple-DES-CBC': 2, 'aES': 3, 'dES-CBC': 1.
                               acSysIPSecSPDProposal2Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.14 integer read-only
IPsec Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2 Enumeration: 'none': 0, 'not-set': 10, 'triple-DES-CBC': 2, 'aES': 3, 'dES-CBC': 1.
                               acSysIPSecSPDProposal3Encryption 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.15 integer read-only
IPsec Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3 Enumeration: 'none': 0, 'not-set': 10, 'triple-DES-CBC': 2, 'aES': 3, 'dES-CBC': 1.
                               acSysIPSecSPDProposal0Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.16 integer read-only
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                               acSysIPSecSPDProposal1Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.17 integer read-only
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                               acSysIPSecSPDProposal2Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.18 integer read-only
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                               acSysIPSecSPDProposal3Authentication 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.19 integer read-only
IPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3 Enumeration: 'hMAC-MD5-96': 4, 'not-set': 10, 'hMAC-SHA-1-96': 2.
                               acSysIPSecSPDPolicyLocalIPAddrType 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.20 integer read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy - Local IP address type (OAM/Control). Access: Offline. AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE Enumeration: 'control': 2, 'oam': 0.
                               acSysIPSecSPDMode 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.21 integer read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy - Mode of Operation (Transport/Tunneling). '0' - Transport '1' - Tunneling. Access: Instant. AC INI-Param: IPSECMODE Enumeration: 'tunneling': 1, 'transport': 0.
                               acSysIPSecSPDPolicyRemoteTunnelIPAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.22 ipaddress read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS
                               acSysIPSecSPDPolicyLocalTunnelIPAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.23 ipaddress read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS
                               acSysIPSecSPDPolicyRemoteTunnelSubnetMask 1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.24 ipaddress read-only
This parameter is used for Secure Internet Protocol (IPsec) Policy - Subnet Mask of the Remote IPSec Address. Access: Instant. AC INI-Param: IPSECPOLICYREMOTESUBNETMASK
                     acSysIPsecProposalTable 1.3.6.1.4.1.5003.9.10.10.1.7.22.22 no-access
IPsec Proposal table
                           acSysIPsecProposalEntry 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1 no-access
                               acSysIPsecProposalIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.1 unsigned32 no-access
Index Field for line. AC INI-Param: IPsecProposalTable_Index
                               acSysIPsecProposalRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.2 rowstatus read-only
ROWSTATUS Field for line. AC INI-Param: IPsecProposalTable_RowStatus
                               acSysIPsecProposalAction 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.3 integer read-only
Mangement Field for ACTIONS. AC INI-Param: IPsecProposalTable_Action Enumeration: 'none': 0.
                               acSysIPsecProposalActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.4 integer read-only
Mangement Field for ACTIONS RESULT. AC INI-Param: IPsecProposalTable_ActionRes Enumeration: 'succeeded': 0.
                               acSysIPsecProposalEncryptionAlgorithm 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.5 integer read-only
Selects the encryption (privacy) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_EncryptionAlgorithm Enumeration: 'none': 0, 'desCbc': 1, 'aes': 3, 'tripleDesCbc': 2.
                               acSysIPsecProposalAuthenticationAlgorithm 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.6 integer read-only
Selects the message authentication (integrity) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm Enumeration: 'none': 0, 'hmacSha1-96': 2, 'hmacMd5-96': 4.
                               acSysIPsecProposalDiffieHellmanGroup 1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.7 integer read-only
Selects the Diffie-Hellman group to use. Access: Online. AC INI-Param: IPsecProposalTable_DHGroup Enumeration: 'group1-768Bits': 0, 'group2-1024Bits': 1.
                     acSysIPsecSATable 1.3.6.1.4.1.5003.9.10.10.1.7.22.23 no-access
IPsec SA table
                           acSysIPsecSAEntry 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1 no-access
                               acSysIPsecSAIndex 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.1 unsigned32 no-access
Index Field for line. AC INI-Param: IPsecSATable_Index
                               acSysIPsecSARowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.2 rowstatus read-only
ROWSTATUS Field for line. AC INI-Param: IPsecSATable_RowStatus
                               acSysIPsecSAAction 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.3 unsigned32 read-only
Mangement Field for ACTIONS. AC INI-Param: IPsecSATable_Action
                               acSysIPsecSAActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.4 unsigned32 read-only
Mangement Field for ACTIONS RESULT. AC INI-Param: IPsecSATable_ActionRes
                               acSysIPsecSARemoteEndpointAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.5 snmpadminstring read-only
IP address or DNS host name of the peer. Access: Online. AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName
                               acSysIPsecSAAuthenticationMethod 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.6 integer read-only
Selects the method used for peer authentication during IKE main mode. Access: Online. AC INI-Param: IPsecSATable_AuthenticationMethod Enumeration: 'presharedKey': 0, 'rSASignature': 1.
                               acSysIPsecSASharedKey 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.7 snmpadminstring read-only
Defines the pre-shared key (in textual format). Access: Online. AC INI-Param: IPsecSATable_SharedKey
                               acSysIPsecSASourcePort 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.8 unsigned32 read-only
Defines the source port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_SourcePort
                               acSysIPsecSADestPort 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.9 unsigned32 read-only
Defines the destination port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_DestPort
                               acSysIPsecSAProtocol 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.10 unsigned32 read-only
Defines the protocol type to which this configuration applies. Standard IP protocol numbers should be used, e.g.: 0 = Any protocol (default) 17 = UDP 6 = TCP . Access: Online. AC INI-Param: IPsecSATable_Protocol
                               acSysIPsecSAPhase1SaLifetimeInSec 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.11 unsigned32 read-only
Determines the duration (in seconds) for which the negotiated IKE SA (main mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec
                               acSysIPsecSAPhase2SaLifetimeInSec 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.12 unsigned32 read-only
Determines the duration (in seconds) for which the negotiated IPSec SA (quick mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec
                               acSysIPsecSAPhase2SaLifetimeInKB 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.13 unsigned32 read-only
Determines the maximum volume of traffic (in kilobytes) for which the negotiated IPSec SA (quick mode) is valid. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB
                               acSysIPsecSADPDmode 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.14 integer read-only
Controls dead peer detection (DPD) as per RFC 3706. Access: Online. AC INI-Param: IPsecSATable_DPDmode Enumeration: 'dPDPeriodic': 1, 'dPDDisabled': 0, 'dPDOnDemand': 2.
                               acSysIPsecSAIPsecMode 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.15 integer read-only
Selects the IPSec mode of operation. 0 = Transport mode (default) 1 = Tunnel mode . Access: Online. AC INI-Param: IPsecSATable_IPsecMode Enumeration: 'tunnel': 1, 'transport': 0.
                               acSysIPsecSARemoteTunnelAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.16 snmpadminstring read-only
IP address of the peer router. Access: Online. AC INI-Param: IPsecSATable_RemoteTunnelAddress
                               acSysIPsecSARemoteSubnetIPAddress 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.17 snmpadminstring read-only
IP address of the remote subnetwork. Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetIPAddress
                               acSysIPsecSARemoteSubnetPrefixLength 1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.18 unsigned32 read-only
Prefix length of the Remote Subnet IP Address parameter (in bits). Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength
               acFirewall 1.3.6.1.4.1.5003.9.10.10.1.7.23
                     acSysAccessListTable 1.3.6.1.4.1.5003.9.10.10.1.7.23.1 no-access
                         acSysAccessListEntry 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1 no-access
                             acSysAccessListIndex 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.1 unsigned32 no-access
Index Field for line. Internal parameter. AC INI-Param: ACCESSLIST_Index
                             acSysAccessListRowStatus 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.2 rowstatus read-only
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
                             acSysAccessListAction 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.3 integer read-only
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A Enumeration: 'none': 0.
                             acSysAccessListActionRes 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.4 integer read-only
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A Enumeration: 'succeeded': 0.
                             acSysAccessListSourceIP 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.5 snmpadminstring read-only
Source IP for access rule. Access: Online. AC INI-Param: ACCESSLIST_Source_IP
                             acSysAccessListNetMask 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.6 ipaddress read-only
Mask for this access rule (bitwise ANDed with the source IP of the packet). Access: Online. AC INI-Param: ACCESSLIST_Net_Mask
                             acSysAccessListStartPort 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.7 unsigned32 read-only
Port range - start. Access: Online. AC INI-Param: ACCESSLIST_Start_Port
                             acSysAccessListEndPort 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.8 unsigned32 read-only
Port range - end. Access: Online. AC INI-Param: ACCESSLIST_End_Port
                             acSysAccessListProtocol 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.9 snmpadminstring read-only
IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP, ANY or numeric value). Access: Online. AC INI-Param: ACCESSLIST_Protocol
                             acSysAccessListPacketSize 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.10 unsigned32 read-only
Maximum packet size (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Packet_Size
                             acSysAccessListByteRate 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.11 unsigned32 read-only
Allowed traffic in bytes per second (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Rate
                             acSysAccessListByteBurst 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.12 unsigned32 read-only
Allowed traffic burst in bytes (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Burst
                             acSysAccessListAllowType 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.13 integer read-only
Allow or block traffic matching this rule. Access: Online. AC INI-Param: ACCESSLIST_Allow_Type Enumeration: 'notSet': 0, 'block': 2, 'allow': 1.
                             acSysAccessListMatchCount 1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.14 unsigned32 read-only
Statistics: number of matched packets. AC INI-Param: ACCESSLIST_MatchCount
               acSysMediaEncription 1.3.6.1.4.1.5003.9.10.10.1.7.24
                     acSysMediaEncriptionRTPAuthenticationDisableTx 1.3.6.1.4.1.5003.9.10.10.1.7.24.1 integer read-write
On a secured RTP session, determines whether to enable Authentication on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableTx Enumeration: 'active': 1, 'inactive': 0.
                     acSysMediaEncriptionRTPAuthenticationDisableRx 1.3.6.1.4.1.5003.9.10.10.1.7.24.2 integer read-write
On a secured RTP session, determines whether to enable Authentication on received RTP packets 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableRx Enumeration: 'active': 1, 'inactive': 0.
                     acSysMediaEncriptionRTPEncryptionDisableTx 1.3.6.1.4.1.5003.9.10.10.1.7.24.3 integer read-write
On a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableTx Enumeration: 'active': 1, 'inactive': 0.
                     acSysMediaEncriptionRTPEncryptionDisableRx 1.3.6.1.4.1.5003.9.10.10.1.7.24.4 integer read-write
On a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableRx Enumeration: 'active': 1, 'inactive': 0.
                     acSysMediaEncriptionRTCPEncryptionDisableTx 1.3.6.1.4.1.5003.9.10.10.1.7.24.5 integer read-write
On a secured RTP session, determines whether to enable Encryption on transmitted RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableTx Enumeration: 'active': 1, 'inactive': 0.
                     acSysMediaEncriptionRTCPEncryptionDisableRx 1.3.6.1.4.1.5003.9.10.10.1.7.24.6 integer read-write
On a secured RTP session, determines whether to enable Encryption on received RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableRx Enumeration: 'active': 1, 'inactive': 0.
                     acSysSRTP 1.3.6.1.4.1.5003.9.10.10.1.7.24.21
                           acSysSRTPPacketMKISize 1.3.6.1.4.1.5003.9.10.10.1.7.24.21.1 unsigned32 read-write
Determines the size of the parameter Master Key Identifier (MKI) in SRTP Tx packets. One of the following values: 0 = MKI Disabled 1 - 4 = size (bytes of MKI). Access: Online. AC INI-Param: SRTPTxPacketMKISize
               acSys802dot1x 1.3.6.1.4.1.5003.9.10.10.1.7.25
                     acSys802dot1xMode 1.3.6.1.4.1.5003.9.10.10.1.7.25.1 integer read-write
Enables support for IEEE 802.1x physical port security. 0 = Disabled 1 = EAP-MD5 2 = Protected EAP (PEAP) 3 = EAP-TLS . Access: Instant. AC INI-Param: 802.1xMode Enumeration: 'disabled': 0, 'protectedEap': 2, 'eapTls': 3, 'eapMd5': 1.
                     acSys802dot1xUsername 1.3.6.1.4.1.5003.9.10.10.1.7.25.2 snmpadminstring read-write
Username for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xUsername
                     acSys802dot1xPassword 1.3.6.1.4.1.5003.9.10.10.1.7.25.3 snmpadminstring read-write
Password for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xPassword
                     acSys802dot1xVerifyPeerCertificate 1.3.6.1.4.1.5003.9.10.10.1.7.25.4 integer read-write
Verify Peer Certificate for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xVerifyPeerCertificate Enumeration: 'enable': 1, 'disable': 0.
           acSysSerialIF 1.3.6.1.4.1.5003.9.10.10.1.8
               acSysSerialIFBaudRate 1.3.6.1.4.1.5003.9.10.10.1.8.1 unsigned32 read-write
Enables changes to the Serial Baud Rate for Simplified Message Desk Interface (SMDI). Range = Any value accepted. Recommended standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600, 115200. Access: Offline. AC INI-Param: SerialBaudRate
               acSysSerialIFData 1.3.6.1.4.1.5003.9.10.10.1.8.2 unsigned32 read-write
Changes the serial data bit for the Simplified Message Desk Interface (SMDI). 7 = 7 Bit 8 = 8 Bit. Access: Offline. AC INI-Param: SerialData
               acSysSerialIFParity 1.3.6.1.4.1.5003.9.10.10.1.8.3 integer read-write
Changes the serial parity for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Odd 2 = Even. Access: Offline. AC INI-Param: SerialParity Enumeration: 'even': 2, 'none': 0, 'odd': 1.
               acSysSerialIFStop 1.3.6.1.4.1.5003.9.10.10.1.8.4 unsigned32 read-write
Changes the serial stop for the Simplified Message Desk Interface (SMDI). 1 = 1 Bit 2 = 2 Bit. Access: Offline. AC INI-Param: SerialStop
               acSysSerialIFFlowControl 1.3.6.1.4.1.5003.9.10.10.1.8.5 integer read-write
Changes the serial flow control for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Hardware. Access: Offline. AC INI-Param: SerialFlowControl Enumeration: 'hardware': 1, 'none': 0.
           acVoiceStream 1.3.6.1.4.1.5003.9.10.10.1.9
               acVoiceStreamStatus 1.3.6.1.4.1.5003.9.10.10.1.9.1 integer read-write
Enables/disables the voice streaming for all voice source types (HTTP, NFS, Local Storage). When enabled, the module requires some system resources, such as tasks and memory allocation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: N/A Enumeration: 'disabled': 0, 'enabled': 1.
               acVoiceStreamUploadMethod 1.3.6.1.4.1.5003.9.10.10.1.9.2 integer read-write
Defines the HTTP request type for uploading the voice stream to the file server. 0 = POST 1 = PUT. Access: Offline. AC INI-Param: N/A Enumeration: 'httpPutMethod': 1, 'httpPostMethod': 0.
               acVoiceStreamUploadPostUri 1.3.6.1.4.1.5003.9.10.10.1.9.3 snmpadminstring read-write
Defines the URI used on the POST request, to upload voice data from the media server to a web server. This parameter is used only when using the HTTP POST for recording and the command is not issued by the Lib (tpncp protocol). The path needs to be set to the upload script on the web server. . Access: Offline. AC INI-Param: N/A
           acSysAMS 1.3.6.1.4.1.5003.9.10.10.1.10
                 acSysAMSProfile 1.3.6.1.4.1.5003.9.10.10.1.10.1 unsigned32 read-write
Enable/Disable AMS Advanced IVR play functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: AMSProfile
                 acSysAMSApsIpAddress 1.3.6.1.4.1.5003.9.10.10.1.10.2 ipaddress read-write
Sets the destination UDP port to which the Heartbeat Packets are sent. Range = IP address in dotted notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Offline. AC INI-Param: HeartbeatDestIP
                 acSysAMSApsPort 1.3.6.1.4.1.5003.9.10.10.1.10.3 unsigned32 read-write
Sets the destination UDP port to which the heartbeat packets are sent. Access: Offline. AC INI-Param: HeartbeatDestPort
                 acSysAMSPrimaryLanguage 1.3.6.1.4.1.5003.9.10.10.1.10.4 snmpadminstring read-write
Defines the Primary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSPrimaryLanguage
                 acSysAMSSecondaryLanguage 1.3.6.1.4.1.5003.9.10.10.1.10.5 snmpadminstring read-write
Defines the Secondary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSSecondaryLanguage
                 acSysAMSAPSProfile 1.3.6.1.4.1.5003.9.10.10.1.10.6 integer read-write
Indicates if the system should expect to use APS bundle (vp.dat and segments.xml files), or if the system should expect the vp.dat file only. A 1 means that an APS bundle should be used. A 0 means that the system should use vp.dat only. The default setting is 1, meaning expect APS bundle. Access: Offline. AC INI-Param: APSEnabled Enumeration: 'apsProvidedAudio': 1, 'vpDatProvidedAudio': 0.
                 acSysAMSForceRepositoryEnable 1.3.6.1.4.1.5003.9.10.10.1.10.7 integer read-write
Indicates that a new audio repository (consisting of VP and XML files) should always be uploaded to the board regardless of whether signals are still being played on the old repository. Access: Instant. AC INI-Param: AMSForceRepositoryUpdateEnabled Enumeration: 'enable': 1, 'disable': 0.
           acSysNetworkFileSystem 1.3.6.1.4.1.5003.9.10.10.1.11
                 acSysNFSTable 1.3.6.1.4.1.5003.9.10.10.1.11.21 no-access
                       acSysNFSEntry 1.3.6.1.4.1.5003.9.10.10.1.11.21.1 no-access
                           acSysNFSIndex 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.1 unsigned32 no-access
Index Field for line. Internal parameter. AC INI-Param: NFSServers_Index
                           acSysNFSRowStatus 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.2 rowstatus read-only
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
                           acSysNFSAction 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.3 integer read-only
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A Enumeration: 'none': 0.
                           acSysNFSActionRes 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.4 integer read-only
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A Enumeration: 'succeeded': 0.
                           acSysNFSHostOrIP 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.5 snmpadminstring read-only
The domain name or IP address of the NFS server. If a domain name is provided, then a DNS server must be configured. Access: Online. AC INI-Param: NFSServers_HostOrIP
                           acSysNFSRootPath 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.6 snmpadminstring read-only
Path to the root of the exported file system. Access: Online. AC INI-Param: NFSServers_RootPath
                           acSysNFSNfsVersion 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.7 integer read-only
NFS version to use with this remote file system, 2 or 3 (default). Access: Online. AC INI-Param: NFSServers_NfsVersion Enumeration: 'v2': 2, 'v3': 3.
                           acSysNFSAuthType 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.8 integer read-only
Identifies the authentication method used with this remote file system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default). Access: Online. AC INI-Param: NFSServers_AuthType Enumeration: 'unix': 1, 'null': 0.
                           acSysNFSUID 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.9 unsigned32 read-only
User ID used in authentication if using AUTH_UNIX. The default is 0. Access: Online. AC INI-Param: NFSServers_UID
                           acSysNFSGID 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.10 unsigned32 read-only
Group ID used in authentication if using AUTH_UNIX. The default is 1. Access: Online. AC INI-Param: NFSServers_GID
                           acSysNFSVlanType 1.3.6.1.4.1.5003.9.10.10.1.11.21.1.11 integer read-only
The VLAN, OAM(0) or Media(1), to use when accessing this remote file system. The default is to use the media VLAN. This parameters applies only if multiple IP addresses are configured on this board. Access: Online. AC INI-Param: NFSServers_VlanType Enumeration: 'media': 1, 'oam': 0.
           acSysHA 1.3.6.1.4.1.5003.9.10.10.1.12
                 acSysHAGlobalIPAddress 1.3.6.1.4.1.5003.9.10.10.1.12.1 ipaddress read-write
Defines the M3K global IP address to be used by the active module in HA system. (Dotted format notation. e.g., 192.10.1.255). Range = Legal IP address. Access: Offline. AC INI-Param: M3KGlobalIpAddr
           acSysTransmission 1.3.6.1.4.1.5003.9.10.10.1.13
                 acSysTransmissionType 1.3.6.1.4.1.5003.9.10.10.1.13.1 integer read-write
Sets the PSTN Transmission type for the board: optical SONET / SDH or copper DS3. Access: Offline. AC INI-Param: PSTNTransmissionType Enumeration: 'copperE1Ds1': 3, 'opticalSonetSdh': 1, 'none': 0, 'copperDs3': 2.
           acSysTiming 1.3.6.1.4.1.5003.9.10.10.1.14
                 acSysTimingMode 1.3.6.1.4.1.5003.9.10.10.1.14.1 integer read-write
Determines the PSTN Timing synchonization mode of the Gateway. One of the following values: TM_External_MODE(1) -External Timing mode - use the SAT trunks Centralized Line Timing to synchronize the Gateway with one of the PSTN interfaces. TM_LineSync_MODE(2) -Distributed Line Timing mode (for the 1610 boards)- without using the SAT timing module. TM_Standalone_MODE(0) -Non-synchronized mode - each board or TPM is synchronized internally from one of the PSTN interfaces without using the SAT timing module. Access: Online. AC INI-Param: TMMode Enumeration: 'lineSync': 2, 'external': 1, 'standAlone': 0.
                 acSysTimingValidationTime 1.3.6.1.4.1.5003.9.10.10.1.14.2 unsigned32 read-write
Reference validation time. Applicable for External timing and Line timing timing references. Range: 0 - 15 minutes. Resolution: 1 minute. Access: Online. AC INI-Param: TMReferenceValidationTime
                 acSysTimingClockToDeriveA 1.3.6.1.4.1.5003.9.10.10.1.14.3 integer read-write
Which Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_A Enumeration: 'clockFromReceiveSide': 7, 'deriveREFFromLineClock1': 0, 'deriveInternalClock': 4.
                 acSysTimingClockToDeriveB 1.3.6.1.4.1.5003.9.10.10.1.14.4 integer read-write
Which Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_B Enumeration: 'clockFromReceiveSide': 7, 'deriveREFFromLineClock1': 0, 'deriveInternalClock': 4.
                 acSysTimingExternalIFType 1.3.6.1.4.1.5003.9.10.10.1.14.5 integer read-write
Defines the external line reference (BITS) transmission format. Access: Online. AC INI-Param: TMExternalIFType Enumeration: 'e1CAS': 1, 'e1FAS': 2, 'e1CRC4': 0, 't12': 5, 't1D4': 3, 't1ESF': 4.
                 acSysTimingLoopBackRef1 1.3.6.1.4.1.5003.9.10.10.1.14.6 integer read-write
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef1 Enumeration: 'loopDisable': 0, 'loopEnable': 1.
                 acSysTimingLoopBackRef2 1.3.6.1.4.1.5003.9.10.10.1.14.7 integer read-write
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef2 Enumeration: 'loopDisable': 0, 'loopEnable': 1.
                 acSysTimingTransmitControl 1.3.6.1.4.1.5003.9.10.10.1.14.8 integer read-write
Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMTransmitControl Enumeration: 'systemClock': 0, 'disableTransmit': 2, 'aIS': 1.
                 acSysTimingE1LineBuildOut 1.3.6.1.4.1.5003.9.10.10.1.14.9 integer read-write
Sets the transmission power between the timing module on the SAT and the E1 external reference clock (ohms). This parameter is only relevant for the Mediant 3000.This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1). Access: Online. AC INI-Param: TME1LineBuildOut Enumeration: 'tm75OhmHighReturnLoss': 4, 'tm120OhmNormalGappedClock': 7, 'tm120OhmHighReturnLoss': 5, 'tm75OhmNormal': 0, 'tm75OhmNormalGappedClock': 6, 'tm120OhmNormal': 1.
                 acSysTimingT1LineBuildOut 1.3.6.1.4.1.5003.9.10.10.1.14.10 integer read-write
External Reference Transmit Line Build Out. Access: Online. AC INI-Param: TMT1LineBuildOut Enumeration: 'dSX10to133ft0dBgappedclock': 7, 'dSX1133to266feet': 1, 'dSX1533to655feet': 4, 'dSX1266to399feet': 2, 'dSX10to133feet0dBCSU': 0, 'dSX1399to533feet': 3.
           acSysLDAP 1.3.6.1.4.1.5003.9.10.10.1.15
                 acSysLDAPServerIp 1.3.6.1.4.1.5003.9.10.10.1.15.1 ipaddress read-write
This parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Online. AC INI-Param: LDAPSERVERIP
                 acSysLDAPServerPort 1.3.6.1.4.1.5003.9.10.10.1.15.2 unsigned32 read-write
Defines the port number for the LDAP server. Range = Valid port number. Access: Online. AC INI-Param: LDAPSERVERPORT
                 acSysLDAPServerMaxRespondTime 1.3.6.1.4.1.5003.9.10.10.1.15.3 unsigned32 read-write
Defines the period of time the module will wait for LDAP server response (seconds). Access: Online. AC INI-Param: LDAPSERVERMAXRESPONDTIME
                 acSysLDAPServerDomainName 1.3.6.1.4.1.5003.9.10.10.1.15.4 snmpadminstring read-write
This parameter is used to indicate the name of LDAP server. Access: Online. AC INI-Param: LDAPSERVERDOMAINNAME
                 acSysLDAPSearchDN 1.3.6.1.4.1.5003.9.10.10.1.15.5 snmpadminstring read-write
This parameter is used to indicate the search DN for LDAP search request. Access: Online. AC INI-Param: LDAPSEARCHDN
                 acSysLDAPPassword 1.3.6.1.4.1.5003.9.10.10.1.15.6 snmpadminstring read-write
This parameter is used to indicate the user password of LDAP server. Access: Online. AC INI-Param: LDAPPASSWORD
                 acSysLDAPBindDN 1.3.6.1.4.1.5003.9.10.10.1.15.7 snmpadminstring read-write
This parameter is used to indicate the of LDAP server bind DN. Access: Online. AC INI-Param: LDAPBINDDN
                 acSysLDAPServiceEnable 1.3.6.1.4.1.5003.9.10.10.1.15.8 integer read-write
Used to either enable or disable LDAP service. 0- disable (default) 1 - enable. Access: Offline. AC INI-Param: LDAPSERVICEENABLE Enumeration: 'enable': 1, 'disable': 0.
       acSystemStatus 1.3.6.1.4.1.5003.9.10.10.2
           acSysType 1.3.6.1.4.1.5003.9.10.10.2.1
               acSysTypeProduct 1.3.6.1.4.1.5003.9.10.10.2.1.1 integer read-only
The type of the Board. AC INI-Param: N/A Enumeration: 'acTrunkPack-IPMServer2000': 33, 'acTrunkPack-260-IpMedia-30Ch': 36, 'acUnknown': 0, 'acTrunkPack-6310': 45, 'acMediaPack-118': 56, 'acTrunkPack-6310-IpMedia': 51, 'acMediant-600-MSBG': 68, 'acTrunkPack-260RT-IpMedia-60Ch': 40, 'acTrunkPack-2810': 34, 'acTrunkPack-1600': 20, 'acTrunkPack-260-IpMedia-120Ch': 38, 'acTrunkPack-6310-T3-IpMedia': 62, 'acTPM1100-PCM': 44, 'acTrunkPack-8410-IpMedia': 64, 'acTrunkPack-260-IpMedia-60Ch': 37, 'acStretto3000': 50, 'acTPM1100': 22, 'acMediant1000': 47, 'acTrunkPack-08': 1, 'acTrunkPack-1610-SB': 29, 'acMediaPack-108': 2, 'acTrunkPack-260-IpMedia': 23, 'acTrunkPack-260RT-IpMedia-120Ch': 41, 'acMediaPack-104': 25, 'acMediaPack112': 58, 'acMediaPack-102': 26, 'acMediaPack114': 57, 'acMediant3000-T3': 60, 'acMediaPack-124': 3, 'acMediaPack-500-MSBG': 69, 'acTrunkPack-MEDIANT2000': 31, 'acMediant1000-MSBG': 67, 'acTrunkPack-STRETTO2000': 32, 'acTrunkPack-6310-T3': 59, 'acATP-260-UN': 55, 'acATP-260': 54, 'acTrunkPack-1610': 24, 'acIPMedia3000': 48, 'acTrunkPack-1610-IpMedia': 30, 'acTrunkPack-260': 42, 'acMediant3000': 49, 'acTrunkPack-6310-SB': 52, 'acTrunkPack-8410': 63, 'acTrunkPack-260RT-IpMedia-30Ch': 39, 'acTrunkPack-260-UN': 43, 'acMediant-600': 65, 'acATP-1610': 53, 'acIPmedia3000-T3': 61, 'acTrunkPack-12610': 66, 'acTrunkPack-260-UN-IpMedia': 35, 'acTPM6300': 46.
               acSysTypeDSP 1.3.6.1.4.1.5003.9.10.10.2.1.2 unsigned32 read-only
Dsp Type. AC INI-Param: N/A
               acSysTypeModule 1.3.6.1.4.1.5003.9.10.10.2.1.3 integer read-only
AC INI-Param: N/A Enumeration: 'soloist': 0, 'second': 1, 'first': 2.
               acSysTypeCPUSpeed 1.3.6.1.4.1.5003.9.10.10.2.1.4 unsigned32 read-only
CPU Speed. AC INI-Param: N/A
           acSysVersion 1.3.6.1.4.1.5003.9.10.10.2.2
               acSysVersionSoftware 1.3.6.1.4.1.5003.9.10.10.2.2.1 snmpadminstring read-only
TrunkPack Software Version. AC INI-Param: N/A
               acSysVersionFlash 1.3.6.1.4.1.5003.9.10.10.2.2.2 unsigned32 read-only
Flash [BootLoader] Version. AC INI-Param: N/A
               acSysVersionIniFile 1.3.6.1.4.1.5003.9.10.10.2.2.3 unsigned32 read-only
Ini file version. AC INI-Param: INIFileVersion
               acSysVersionSoftwareDate 1.3.6.1.4.1.5003.9.10.10.2.2.4 snmpadminstring read-only
TrunkPack Software Date. AC INI-Param: N/A
           acSysId 1.3.6.1.4.1.5003.9.10.10.2.3
               acSysIdName 1.3.6.1.4.1.5003.9.10.10.2.3.1 snmpadminstring read-only
The name fo the board. AC INI-Param: N/A
               acSysIdSerialNumber 1.3.6.1.4.1.5003.9.10.10.2.3.2 unsigned32 read-only
serial number of board. AC INI-Param: N/A
               acSysIdSlotNumber 1.3.6.1.4.1.5003.9.10.10.2.3.3 unsigned32 read-only
Slot number. AC INI-Param: N/A
               acSysIdFirstSerialNumber 1.3.6.1.4.1.5003.9.10.10.2.3.4 unsigned32 read-only
The device's first serial number. When the device is part of a dual module board this is the first module's serial number. When the device is the first module in a dual module or the device is not in a dual module board, the values for asSysIdSerialNumber and acSysIdFirstSerialNumber are the same. AC INI-Param: N/A
           acSysCount 1.3.6.1.4.1.5003.9.10.10.2.4
               acSysCountDSPs 1.3.6.1.4.1.5003.9.10.10.2.4.1 unsigned32 read-only
DSP Count. AC INI-Param: N/A
               acSysCountChannels 1.3.6.1.4.1.5003.9.10.10.2.4.2 unsigned32 read-only
Channel Count. AC INI-Param: N/A
               acSysCountTrunks 1.3.6.1.4.1.5003.9.10.10.2.4.3 unsigned32 read-only
Trunks Count. AC INI-Param: N/A
           acSysState 1.3.6.1.4.1.5003.9.10.10.2.5
               acSysStateTemperature 1.3.6.1.4.1.5003.9.10.10.2.5.1 unsigned32 read-only
Temperature of the board in degrees Celsius, should not go higher then 60!. AC INI-Param: N/A
               acSysStateOperational 1.3.6.1.4.1.5003.9.10.10.2.5.2 integer read-only
The operational state of the gateway. AC INI-Param: N/A Enumeration: 'disabled': 1, 'enabled': 2.
               acSysStateHAupdateInProgress 1.3.6.1.4.1.5003.9.10.10.2.5.3 integer read-only
Indicates during update process, which done between active and redundant boards. AC INI-Param: N/A Enumeration: 'updateDone': 1, 'updateInProgress': 2.
               acSysStateGWSeverity 1.3.6.1.4.1.5003.9.10.10.2.5.4 integer read-only
The highest alarm severity on the device. AC INI-Param: N/A Enumeration: 'major': 4, 'noAlarm': 0, 'indeterminate': 1, 'warning': 2, 'critical': 5, 'minor': 3.
               acSysStateIsPstnManagementEnable 1.3.6.1.4.1.5003.9.10.10.2.5.5 integer read-only
Is Pstn Management Enable 0 - Disable 1 - Enable. AC INI-Param: N/A Enumeration: 'enable': 1, 'disable': 0.
           acSysNetwork 1.3.6.1.4.1.5003.9.10.10.2.6
               acSysEthernet 1.3.6.1.4.1.5003.9.10.10.2.6.1
                   acSysEthernetFirstPortDuplexMode 1.3.6.1.4.1.5003.9.10.10.2.6.1.1 integer read-only
full-duplex or half-duplex connection. AC INI-Param: N/A Enumeration: 'notAvailable': 3, 'forceModeValue': 2, 'fullDuplex': 1, 'halfDuplex': 0.
                   acSysEthernetFirstPortSpeed 1.3.6.1.4.1.5003.9.10.10.2.6.1.2 integer read-only
AC INI-Param: N/A Enumeration: 'notAvailable': 3, 'forceModeValue': 2, 'ac100Mbps': 100, 'ac10Mbps': 10, 'ac1000Mbps': 1000.
                   acSysEthernetSecondPortDuplexMode 1.3.6.1.4.1.5003.9.10.10.2.6.1.3 integer read-only
full-duplex or half-duplex connection. AC INI-Param: N/A Enumeration: 'notAvailable': 3, 'forceModeValue': 2, 'fullDuplex': 1, 'halfDuplex': 0.
                   acSysEthernetSecondPortSpeed 1.3.6.1.4.1.5003.9.10.10.2.6.1.4 integer read-only
AC INI-Param: N/A Enumeration: 'notAvailable': 3, 'forceModeValue': 2, 'ac100Mbps': 100, 'ac10Mbps': 10, 'ac1000Mbps': 1000.
                   acSysEthernetActivePortNumber 1.3.6.1.4.1.5003.9.10.10.2.6.1.5 unsigned32 read-only
Display the current active ethernet port number. 0 - not relevant. AC INI-Param: N/A
                   acSysEthernetStatusTable 1.3.6.1.4.1.5003.9.10.10.2.6.1.21 no-access
Ethernet relevant information
                         acSysEthernetStatusEntry 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1 no-access
                             acSysEthernetStatusIndex 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.1 unsigned32 no-access
The row's index. On 8410 Systems: Index 1 related to GBE port no.1 in the TER (Media). Index 2 related to GBE port no.2 in the TER (Media). Index 3 related to port 1A in PEM #1 (Control). Index 4 related to port 1B in PEM #2 (Control). Index 5 related to port 2A in PEM #1 (OAM). Index 6 related to port 2B in PEM #2 (OAM). On MSBG only: 0 - WAN interface. 1-12 LAN interfaces. AC INI-Param: N/A
                             acSysEthernetStatusPortDuplexMode 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.2 integer read-only
full-duplex or half-duplex connection. AC INI-Param: N/A Enumeration: 'notAvailable': 3, 'forceModeValue': 2, 'fullDuplex': 1, 'halfDuplex': 0.
                             acSysEthernetStatusPortSpeed 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.3 integer read-only
port speed. AC INI-Param: N/A Enumeration: 'notAvailable': 3, 'forceModeValue': 2, 'ac100Mbps': 100, 'ac10Mbps': 10, 'ac1000Mbps': 1000.
                             acSysEthernetStatusActivePortNumber 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.4 integer read-only
Status of ethernet port - active or not active. AC INI-Param: N/A Enumeration: 'notActive': 0, 'active': 1.
                             acSysEthernetStatusPortState 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.5 integer read-only
Port State. AC INI-Param: N/A Enumeration: 'disabled': 0, 'notApplicable': 10, 'forwarding': 3, 'blocking': 1, 'learning': 2.
                             acSysEthernetStatusPowerOverEthernet 1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.6 integer read-only
Power over Ethernet interface status. AC INI-Param: N/A Enumeration: 'active': 1, 'notApplicable': 0, 'notActive': 2.
               acSysNAT 1.3.6.1.4.1.5003.9.10.10.2.6.2
                   acSysNATType 1.3.6.1.4.1.5003.9.10.10.2.6.2.1 integer read-only
Identified NAT type. -1 - STUN client is disabled 0 - None 1 - FullCone 2 - Restricted 3 - PortRestricted 4 - Symmetric 5 - SymmetricFireWall 6 - Blocked 7 - Unknown 10 - NAT identification in progress. AC INI-Param: N/A Enumeration: 'portRestricted': 3, 'symmetricFireWall': 5, 'none': 0, 'natIdentificationInProgress': 10, 'restricted': 2, 'symmetric': 4, 'fullCone': 1, 'unknown': 7, 'stunDisabled': -1, 'blocked': 6.
               acSysWebStat 1.3.6.1.4.1.5003.9.10.10.2.6.3
                   acSysWebStatPasswordControlViaSNMP 1.3.6.1.4.1.5003.9.10.10.2.6.3.1 integer read-only
If set to 1 it will allow changing the web interface username and password via SNMP. AC INI-Param: WEBPasswordControlViaSNMP Enumeration: 'disabled': 0, 'enabled': 1.
               acSysIPStatus 1.3.6.1.4.1.5003.9.10.10.2.6.4
                   acSysInterfaceStatusTable 1.3.6.1.4.1.5003.9.10.10.2.6.4.21 no-access
                         acSysInterfaceStatusEntry 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1 no-access
                             acSysInterfaceStatusEntryIndex 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.1 unsigned32 no-access
Related Interface index in the interface configuration table (in case the table is empty - meaning there is only single IP the index will appear with 0). AC INI-Param: N/A
                             acSysInterfaceStatusTypeIndex 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.2 unsigned32 no-access
1 - IP Address. 2 - IPv6 Link-Local Address. AC INI-Param: N/A
                             acSysInterfaceStatusApplicationTypes 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.3 integer read-only
The type assigned to the interface. AC INI-Param: N/A Enumeration: 'control': 2, 'oamAndMediaAndControl': 6, 'oamAndControl': 4, 'media': 1, 'oam': 0, 'oamAndMedia': 3, 'mediaAndControl': 5, 'data': 11.
                             acSysInterfaceStatusMode 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.4 integer read-only
Interface configuration mode. AC INI-Param: N/A Enumeration: 'iPv6PrefixManual': 3, 'iPv4Manual': 10, 'iPv6Manual': 4.
                             acSysInterfaceStatusIPAddress 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.5 snmpadminstring read-only
IP Address (can be either IPv4 or IPv6) for this interface. AC INI-Param: N/A
                             acSysInterfaceStatusPrefixLength 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.6 unsigned32 read-only
The number of 1 bits in this interfaces netmask. AC INI-Param: N/A
                             acSysInterfaceStatusGateway 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.7 snmpadminstring read-only
Default Gateway. AC INI-Param: N/A
                             acSysInterfaceStatusVlanID 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.8 unsigned32 read-only
VLAN ID of this interface. AC INI-Param: N/A
                             acSysInterfaceStatusName 1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.9 snmpadminstring read-only
16 character string of this interfaces name. AC INI-Param: N/A
           acSysTime 1.3.6.1.4.1.5003.9.10.10.2.7
               acSysTimeUp 1.3.6.1.4.1.5003.9.10.10.2.7.1 unsigned32 read-only
Time (in Seconds) that the board is alive. AC INI-Param: N/A
           acSysVoicePrompt 1.3.6.1.4.1.5003.9.10.10.2.8
               acSysVoicePromptTotalMemorySize 1.3.6.1.4.1.5003.9.10.10.2.8.1 unsigned32 read-only
Get the total voice prompt memory size. AC INI-Param: N/A
               acSysVoicePromptMaxFreeMemorySize 1.3.6.1.4.1.5003.9.10.10.2.8.2 unsigned32 read-only
Get the maximu voice prompt memory free size. AC INI-Param: N/A
           acSysRepositoryAMS 1.3.6.1.4.1.5003.9.10.10.2.9
               acSysRepositoryAMSIsReadyForUpdate 1.3.6.1.4.1.5003.9.10.10.2.9.1 integer read-only
Verify if the old repository is free or there are signals still using it. AC INI-Param: N/A Enumeration: 'true': 1, 'false': 0.
           acSysHAStatus 1.3.6.1.4.1.5003.9.10.10.2.10
                 acSysHAStatusReady 1.3.6.1.4.1.5003.9.10.10.2.10.1 integer read-only
Defines whether the M3K system supports HA or not. AC INI-Param: N/A Enumeration: 'notApplicable': 1, 'yes': 2, 'no': 3.
           acSysLDAPStatus 1.3.6.1.4.1.5003.9.10.10.2.11
                 acSysLDAPStatusServerMode 1.3.6.1.4.1.5003.9.10.10.2.11.1 integer read-only
LDAP server status. AC INI-Param: N/A Enumeration: 'notApplicable': 0, 'connected': 3, 'connecting': 2, 'connectionBroken': 1.
       acSystemAction 1.3.6.1.4.1.5003.9.10.10.3
           acSysAction 1.3.6.1.4.1.5003.9.10.10.3.1
               acSysActionSet 1.3.6.1.4.1.5003.9.10.10.3.1.1
                   acSysActionSetReset 1.3.6.1.4.1.5003.9.10.10.3.1.1.1 unsigned32 read-write
remote Reset. To remote reset the board, set the value of this object to 1. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. Access: Instant. AC INI-Param: N/A
                   acSysActionSetResetControl 1.3.6.1.4.1.5003.9.10.10.3.1.1.2 integer read-write
Determines the remote reset action. 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload. Access: Instant. AC INI-Param: RemoteResetControl Enumeration: 'resetFromFlashAfterBurn': 1, 'resetFromFlashNoBurn': 2, 'resetFromBootP': 3.
                   acSysActionSetDefaults 1.3.6.1.4.1.5003.9.10.10.3.1.1.3 unsigned32 read-write
To set the board to default values, set the value of this object to 1. Access: Instant. AC INI-Param: N/A
                   acSysActionSetSaveConfig 1.3.6.1.4.1.5003.9.10.10.3.1.1.4 unsigned32 read-write
To save all current configuration in the board onto the flash, set the value of this object to 1. NOTE: Do NOT save the configuration while voice is running - this will cause a delay. Access: Instant. AC INI-Param: N/A
                   acSysActionSetAutoUpdate 1.3.6.1.4.1.5003.9.10.10.3.1.1.5 unsigned32 read-write
To update the system configuration according to the provisioned IniFileUrl, set the value of this object to 1. Access: Instant. AC INI-Param: N/A
                   acSysActionSetGetTimeFromNTPServer 1.3.6.1.4.1.5003.9.10.10.3.1.1.6 unsigned32 read-write
Initiates an immediate NTP time fetch. Access: Instant. AC INI-Param: N/A
                   acSysActionSetSwUpgrade 1.3.6.1.4.1.5003.9.10.10.3.1.1.7 integer read-write
Defines the type of SW upgrade in M3K HA system (Hitless or system reset). Access: Instant. AC INI-Param: M3KHASwUpgradeMode Enumeration: 'hitLessUpGrade': 1, 'systemResetUpGrade': 2.
                   acSysActionSetOnLineChangesApply 1.3.6.1.4.1.5003.9.10.10.3.1.1.8 integer read-write
Applies the board on line changed params. Access: Instant. AC INI-Param: N/A Enumeration: 'defaultValue': 0, 'applyChanges': 1.
                   acSysActionSetIPSecTLSUpgrade 1.3.6.1.4.1.5003.9.10.10.3.1.1.9 integer read-write
To update the IPSec TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/A Enumeration: 'defaultValue': 0, 'upDateChanges': 1.
                   acSysActionSetGWAppTLSUpgrade 1.3.6.1.4.1.5003.9.10.10.3.1.1.10 integer read-write
To update the GWApp TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/A Enumeration: 'defaultValue': 0, 'upDateChanges': 1.
                   acSysActionSetConvertNetworkIFsConfiguration 1.3.6.1.4.1.5003.9.10.10.3.1.1.11 integer read-write
SET to 1 will convert network configuration to advance multiple network Interfaces mode. Access: Instant. AC INI-Param: N/A Enumeration: 'defaultValue': 0, 'convertAction': 1.
                   acSysActionSetActionId 1.3.6.1.4.1.5003.9.10.10.3.1.1.12 unsigned32 read-write
This field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/A
                   acSysActionSetAutoUpdateActionResult 1.3.6.1.4.1.5003.9.10.10.3.1.1.13 snmpadminstring read-only
Indicates the autoupdates operation status in the form of a string: 'acSysActionId ; ; '. The status field can be: 'success'\'failure'\'inProgress'. The infromation is valid only when downloading one file at a time. Note - a second way of following the success of the file downloading is to see the files name being updated in the acSysFile subtree. AC INI-Param: N/A
               acSysActionAdmin 1.3.6.1.4.1.5003.9.10.10.3.1.2
                   acSysActionAdminState 1.3.6.1.4.1.5003.9.10.10.3.1.2.1 integer read-write
Determines the gateway's operational state. 0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl. 1 - shuttingDown: (read only) Graceful Shutdown is being carried out. 2 - unlocked: GW is in service. Access: Online. AC INI-Param: N/A Enumeration: 'locked': 0, 'shuttingDown': 1, 'unlocked': 2.
                   acSysActionAdminStateLockTimeout 1.3.6.1.4.1.5003.9.10.10.3.1.2.2 integer32 read-write
Defines the time remaining (in seconds) for the shutdown to complete. 0 = immediate shutdown -1 = waits until all calls drop (infinite) >0 = the number of seconds to wait. Access: Offline. AC INI-Param: N/A
               acSysUpload 1.3.6.1.4.1.5003.9.10.10.3.1.3
                   acSysUploadActionType 1.3.6.1.4.1.5003.9.10.10.3.1.3.1 integer read-write
Action to be carried out. Setting this field triggers the action. File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17) only access is instant. File removal supported for all other then iniFile(1), v5PortFile(16) and DataConfigurationFile(17), (v5PortFile removal is done via acV5PortActionType) access is offline. Access: Instant. AC INI-Param: N/A Enumeration: 'none': 0, 'actionDone': 10, 'upload': 1, 'remove': 2.
                   acSysUploadFileType 1.3.6.1.4.1.5003.9.10.10.3.1.3.2 integer read-write
The file type to be uploaded. Note - for file types with more then one instance (like CAS files) use the acSysActionFileInstance to specify which instance you want to upload. Access: Instant. AC INI-Param: N/A Enumeration: 'dataConfigurationFile': 17, 'xmlFile': 8, 'tlsRootFile': 14, 'tlsPKeyFile': 12, 'prerecordedTonesFile': 4, 'videoFontFile': 15, 'fxoCoeffFile': 6, 'iniFile': 1, 'cptFile': 2, 'externalCoderFile': 9, 'tlsCertFile': 13, 'vpFile': 3, 'dialPlanFile': 11, 'v5PortFile': 16, 'userInfoFile': 10, 'casFile': 7, 'fxsCoeffFile': 5.
                   acSysUploadFileNumber 1.3.6.1.4.1.5003.9.10.10.3.1.3.3 integer32 read-write
File number for file types that have more then one file instance, such as CAS, VideoFont etc'. Access: Instant. AC INI-Param: N/A
                   acSysUploadFileURI 1.3.6.1.4.1.5003.9.10.10.3.1.3.4 snmpadminstring read-write
URI indicating file location to be downloaded to. Access: Instant. AC INI-Param: N/A
                   acSysUploadActionID 1.3.6.1.4.1.5003.9.10.10.3.1.3.5 unsigned32 read-write
This field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/A
                   acSysUploadActionResult 1.3.6.1.4.1.5003.9.10.10.3.1.3.6 snmpadminstring read-only
Action result. Includes action status (success, failure or inProgress), action ID. AC INI-Param: N/A
       acSystemChassis 1.3.6.1.4.1.5003.9.10.10.4
           acSystemChassisDryContactsOutStatus 1.3.6.1.4.1.5003.9.10.10.4.1 bits read-only
Indicates current state of the alarm dry contacts out signals (3 signals). This is a bit-map of possible conditions. AC INI-Param: N/A Bits: 'minorAlarm': 3, 'noAlarm': 0, 'majorAlarm': 2, 'criticalAlarm': 1.
           acSystemChassisDryContactsInStatus 1.3.6.1.4.1.5003.9.10.10.4.2 bits read-only
Indicates current state of the alarm dry contacts - in signals (1 signals). The role of each input signal should be according to the customer's requirements. This is a bit-map of possible conditions. AC INI-Param: N/A Bits: 'alarm1': 1, 'noAlarm': 0.
           acSystemChassisLastChanged 1.3.6.1.4.1.5003.9.10.10.4.3 unsigned32 read-only
The value of sysUpTime at the time a row is modified in any of the acSystemChassis subtree's objects. AC INI-Param: N/A
           acSysModuleTable 1.3.6.1.4.1.5003.9.10.10.4.21 no-access
                 acSysModuleEntry 1.3.6.1.4.1.5003.9.10.10.4.21.1 no-access
                     acSysModuleIndex 1.3.6.1.4.1.5003.9.10.10.4.21.1.1 unsigned32 no-access
The Module number in the system. AC INI-Param: N/A
                     acSysModuleGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.21.1.2 unsigned32 read-only
The slot number in the chassis. 1 being the bottom slot and so on. AC INI-Param: N/A
                     acSysModuleType 1.3.6.1.4.1.5003.9.10.10.4.21.1.3 integer read-only
The module's type. AC INI-Param: N/A Enumeration: 'acTrunkPack-IPMServer2000': 33, 'acTrunkPack-260-IpMedia-30Ch': 36, 'acUnknown': 0, 'acTrunkPack-6310': 45, 'acMediaPack-118': 56, 'acTrunkPack-6310-IpMedia': 51, 'acMediant1000IFT1WANModule': 277, 'acMediaPack500IFWANModule': 269, 'acMediant600IFBRIModule': 261, 'acTrunkPack-260RT-IpMedia-60Ch': 40, 'acTrunkPack-2810': 34, 'acMediant600IPMediaModule': 262, 'acMediaPack500CPUmodule': 265, 'acTrunkPack-1600': 20, 'acTrunkPack-260-IpMedia-120Ch': 38, 'acMediant1000IFBRIModule': 256, 'acTrunkPack-6310-T3-IpMedia': 62, 'acMediaPack500IFWiFiModule': 270, 'acTPM1100-PCM': 44, 'acMediaPack500IFAnalogModule': 267, 'acTrunkPack-8410-IpMedia': 64, 'acMediaPack500EthernetModule': 272, 'acTrunkPack-260-IpMedia-60Ch': 37, 'acMediaPack500IFBRIModule': 268, 'acStretto3000': 50, 'acTPM1100': 22, 'acMediant1000': 47, 'sA3': 252, 'acTrunkPack-08': 1, 'acTrunkPack-1610-SB': 29, 'acMediaPack-108': 2, 'acTrunkPack-260-IpMedia': 23, 'acTrunkPack-260RT-IpMedia-120Ch': 41, 'sA2': 251, 'acMediaPack-104': 25, 'acMediaPack112': 58, 'acMediaPack-102': 26, 'acMediaPack114': 57, 'acMediant3000-T3': 60, 'acMediaPack-124': 3, 'acMediaPack-500-MSBG': 69, 'acTrunkPack-MEDIANT2000': 31, 'acMediaPack500IFDigitalModule': 266, 'acMediaPack500IPMediaModule': 271, 'acTrunkPack-STRETTO2000': 32, 'acMediant1000IFAnalogModule': 255, 'acTrunkPack-6310-T3': 59, 'acATP-260-UN': 55, 'acMediaPack500IFT1WANModule': 273, 'acATP-260': 54, 'acTrunkPack-1610': 24, 'acIPMedia3000': 48, 'acMediaPack500IFSHDSLModule': 274, 'acMediant600IFAnalogModule': 260, 'acTrunkPack-1610-IpMedia': 30, 'acMediant1000IFWANModule': 276, 'acTrunkPack-260': 42, 'acMediant3000': 49, 'acMediant1000CPUmodule': 253, 'acMediant1000IFSHDSLModule': 278, 'acTrunkPack-6310-SB': 52, 'acTrunkPack-8410': 63, 'acTrunkPack-260RT-IpMedia-30Ch': 39, 'acTrunkPack-260-UN': 43, 'acMediant600IFDigitalModule': 259, 'sA1': 250, 'acMediaPack500IFADSLModule': 275, 'acATP-1610': 53, 'acIPmedia3000-T3': 61, 'acMediant600CPUmodule': 258, 'acTrunkPack-260-UN-IpMedia': 35, 'acMediant1000IFDigitalModule': 254, 'acMediant1000IPMediaModule': 257, 'acTPM6300': 46, 'acMediant1000IFADSLModule': 279.
                     acSysModulePresence 1.3.6.1.4.1.5003.9.10.10.4.21.1.4 integer read-only
Is the module present or missing. AC INI-Param: N/A Enumeration: 'present': 1, 'missing': 2.
                     acSysModuleLicenseKeyList 1.3.6.1.4.1.5003.9.10.10.4.21.1.5 snmpadminstring read-only
List of active features as enabled by the license key. SA modules return NULL. AC INI-Param: N/A
                     acSysModuleSerialNumber 1.3.6.1.4.1.5003.9.10.10.4.21.1.6 integer32 read-only
The module's serial number. For 6310 the serial number is the decimal form of the last 5 characters in the MAC Address. SA modules return 0. When the modules in the table are unavailable for audit (no HA) (-1) is returned. AC INI-Param: N/A
                     acSysModuleSWVersion 1.3.6.1.4.1.5003.9.10.10.4.21.1.7 snmpadminstring read-only
The version of the SW being run in the module placed . SA Modules return NULL. AC INI-Param: N/A
                     acSysModuleOperationalState 1.3.6.1.4.1.5003.9.10.10.4.21.1.8 integer read-only
The operational state of the module. Determined internally by the system. AC INI-Param: N/A Enumeration: 'enable': 2, 'disable': 1.
                     acSysModuleHAStatus 1.3.6.1.4.1.5003.9.10.10.4.21.1.9 integer read-only
Modules status with in the system. Designed to define the HA state. AC INI-Param: N/A Enumeration: 'standAlone': 4, 'redundant': 3, 'notApplicable': 6, 'redundantNonHA': 5, 'active': 2, 'acitveNonHA': 1.
                     acSysModuleLEDs 1.3.6.1.4.1.5003.9.10.10.4.21.1.10 octet string read-only
Bit Field for the LEDs on the front of the module. LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. 3 MSB are the color - 0 - none 1- Green 2 - Red 3 - Yellow 4 - Orange 5 - Blue 7 - Gray (unknown). AC INI-Param: N/A
                     acSysModuleTemperature 1.3.6.1.4.1.5003.9.10.10.4.21.1.11 integer32 read-only
Temperature of the board in degrees Celsius. SA Modules return 0. AC INI-Param: N/A
                     acSysModuleActions 1.3.6.1.4.1.5003.9.10.10.4.21.1.12 integer read-write
Actions to be performed by the module. Access: Instant. AC INI-Param: N/A Enumeration: 'reset': 1, 'switchOver': 2, 'actionDone': 3.
                     acSysModuleFRUaction 1.3.6.1.4.1.5003.9.10.10.4.21.1.13 integer read-write
Field Replace Unit actions Relevant to IF-Module only. Access: Instant. AC INI-Param: N/A Enumeration: 'fruBackToServiceAction': 3, 'fruOutOfServiceAction': 2, 'fruActionDone': 1, 'fruNotApplicable': 4.
                     acSysModuleFRUstatus 1.3.6.1.4.1.5003.9.10.10.4.21.1.14 integer read-only
Field Replace Unit module's status. AC INI-Param: N/A Enumeration: 'moduleMismatch': 5, 'moduleNotExist': 1, 'moduleFaulty': 6, 'notApplicable': 7, 'moduleOutOfService': 3, 'moduleExistOk': 2, 'moduleBackToServiceStart': 4.
                     acSysModuleNumOfPorts 1.3.6.1.4.1.5003.9.10.10.4.21.1.15 unsigned32 read-only
The number of physical interfaces in a module, analog or digital. AC INI-Param: N/A
                     acSysModuleFirstPortNum 1.3.6.1.4.1.5003.9.10.10.4.21.1.16 unsigned32 read-only
The logical number as seen in the general trunk/analog-channel table of the first port in the module in question. Since analog and digital ports can be operational at once, analog and digital ports may have same logical number. AC INI-Param: N/A
           acSysFanTrayTable 1.3.6.1.4.1.5003.9.10.10.4.22 no-access
                 acSysFanTrayEntry 1.3.6.1.4.1.5003.9.10.10.4.22.1 no-access
                     acSysFanTrayIndex 1.3.6.1.4.1.5003.9.10.10.4.22.1.1 unsigned32 no-access
Fan-Tray's index in the system. AC INI-Param: N/A
                     acSysFanTrayGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.22.1.2 unsigned32 read-only
The slot number in the chassis. AC INI-Param: N/A
                     acSysFanTrayExistence 1.3.6.1.4.1.5003.9.10.10.4.22.1.3 integer read-only
Is the Fan-Tray present or missing. AC INI-Param: N/A Enumeration: 'present': 1, 'missing': 2.
                     acSysFanTrayType 1.3.6.1.4.1.5003.9.10.10.4.22.1.4 snmpadminstring read-only
The type of the Fan-Tray . AC INI-Param: N/A
                     acSysFanTrayLEDs 1.3.6.1.4.1.5003.9.10.10.4.22.1.5 octet string read-only
This object built as a bit-field which represents the Fan-Tray's LEDs status. The first four bites represent the System's LED status and the last four bites represent the Shelf-LEDs status. AC INI-Param: N/A
                     acSysFanTraySeverity 1.3.6.1.4.1.5003.9.10.10.4.22.1.6 integer read-only
The Severity of the whole fan tray according to the current active alarm in the alarm table: Critical, Major or cleared. AC INI-Param: N/A Enumeration: 'major': 4, 'indeterminate': 1, 'warning': 2, 'critical': 5, 'cleared': 0, 'minor': 3.
                     acSysFanTrayFansConfiguredSpeed 1.3.6.1.4.1.5003.9.10.10.4.22.1.7 octet string read-only
The fan's configured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
                     acSysFanTrayFansCurrentSpeed 1.3.6.1.4.1.5003.9.10.10.4.22.1.8 octet string read-only
The fan's mesured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/A
                     acSysFanTrayFansStatus 1.3.6.1.4.1.5003.9.10.10.4.22.1.9 octet string read-only
A bit field which display the working status of each fan in the Fan-Tray. 0 - Working 1 - Faulty. AC INI-Param: N/A
           acSysPowerSupplyTable 1.3.6.1.4.1.5003.9.10.10.4.23 no-access
                 acSysPowerSupplyEntry 1.3.6.1.4.1.5003.9.10.10.4.23.1 no-access
                     acSysPowerSupplyIndex 1.3.6.1.4.1.5003.9.10.10.4.23.1.1 unsigned32 no-access
Power-Supply's index in the system. AC INI-Param: N/A
                     acSysPowerSupplyGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.23.1.2 unsigned32 read-only
The slot number in the chassis. AC INI-Param: N/A
                     acSysPowerSupplyExistence 1.3.6.1.4.1.5003.9.10.10.4.23.1.3 integer read-only
Is the Power-Supply present or missing. AC INI-Param: N/A Enumeration: 'present': 1, 'missing': 2.
                     acSysPowerSupplyHwversion 1.3.6.1.4.1.5003.9.10.10.4.23.1.4 snmpadminstring read-only
PSs HW version. AC INI-Param: N/A
                     acSysPowerSupplyLEDs 1.3.6.1.4.1.5003.9.10.10.4.23.1.5 octet string read-only
A bit-field representation of the Power-Supply LEDs' status. The first four bites represent the Power-Supply LED's status and the last four bites represent the Fault LED's status. AC INI-Param: N/A
                     acSysPowerSupplySeverity 1.3.6.1.4.1.5003.9.10.10.4.23.1.6 integer read-only
The Severity of the power-supply according to the current active alarm in the alarm table. AC INI-Param: N/A Enumeration: 'major': 5, 'indeterminate': 2, 'warning': 3, 'critical': 6, 'cleared': 1, 'minor': 4.
           acSysPEMTable 1.3.6.1.4.1.5003.9.10.10.4.24 no-access
                 acSysPEMEntry 1.3.6.1.4.1.5003.9.10.10.4.24.1 no-access
                     acSysPEMIndex 1.3.6.1.4.1.5003.9.10.10.4.24.1.1 unsigned32 no-access
PEM-Module's index in the system. AC INI-Param: N/A
                     acSysPEMGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.24.1.2 unsigned32 read-only
The slot number in the chassis. AC INI-Param: N/A
                     acSysPEMExistence 1.3.6.1.4.1.5003.9.10.10.4.24.1.3 integer read-only
Is the PEM-Module present or missing. AC INI-Param: N/A Enumeration: 'present': 1, 'missing': 2.
                     acSysPEMType 1.3.6.1.4.1.5003.9.10.10.4.24.1.4 snmpadminstring read-only
PEMs Type. AC INI-Param: N/A
                     acSysPEMElectricWireConnection 1.3.6.1.4.1.5003.9.10.10.4.24.1.5 integer read-only
Present the status of the electricity connector located on the PEM card. AC INI-Param: N/A Enumeration: 'connected': 1, 'disconnected': 2.
           acSysSATModule 1.3.6.1.4.1.5003.9.10.10.4.25
                 acSysSATTable 1.3.6.1.4.1.5003.9.10.10.4.25.21 no-access
                       acSysSATEntry 1.3.6.1.4.1.5003.9.10.10.4.25.21.1 no-access
                           acSysSATSatIndex 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.1 unsigned32 no-access
SAT-Module's index in the system. AC INI-Param: N/A
                           acSysSATGeographicalPosition 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.2 unsigned32 read-only
The slot number in the chassis. AC INI-Param: N/A
                           acSysSATType 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.3 snmpadminstring read-only
SATs Type. AC INI-Param: N/A
                           acSysSATInitInformation 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.4 integer read-only
Sat's Init Information. AC INI-Param: N/A Enumeration: 'reConfigTry2': 2, 'initIsMissing': 5, 'remoteKeepAlive': 10, 'notInitialized': 4, 'initFail': 7, 'reConfig': 1, 'detected': 0, 'reConfigTry3': 3, 'initInProgress': 8, 'initUpdateREFTable': 9, 'initWasReset': 6, 'initComplete': 11.
                           acSysSATTimingUnitExistence 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.5 integer read-only
Is the Timig Unit present or missing. AC INI-Param: N/A Enumeration: 'notExist': 2, 'exist': 1.
                           acSysSATTimingRefSelection 1.3.6.1.4.1.5003.9.10.10.4.25.21.1.6 integer read-only
SAT's Timing Reference Selection. AC INI-Param: N/A Enumeration: 'rEFFromLineClock2': 5, 'rEFFromLineClock3': 6, 'rEFFromLineClock1': 4, 'rEFFromBITSA': 1, 'rEFFromLineClock7': 7, 'rEFFromBITSB': 2, 'bITSNOREF': 0, 'bITSNOREF1': 3.
                 acSysSATFramersTable 1.3.6.1.4.1.5003.9.10.10.4.25.22 no-access
                       acSysSATFramersEntry 1.3.6.1.4.1.5003.9.10.10.4.25.22.1 no-access
                           acSysSATFramersSatIndex 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.1 unsigned32 no-access
SAT-Module's index in the system. AC INI-Param: N/A
                           acSysSATFramersFramerIndex 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.2 unsigned32 no-access
Framer's Index. AC INI-Param: N/A
                           acSysSATFramersFramerInterfaceStatus 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.3 integer read-only
Framer Interface Status. AC INI-Param: N/A Enumeration: 'framerNotInitialized': 1, 'framerInitialized': 0.
                           acSysSATFramersFramerLoopBackRef 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.4 integer read-only
Frame rLoop Back Reference. AC INI-Param: N/A Enumeration: 'loopdisable': 0, 'loopenable': 1.
                           acSysSATFramersFramerInterfaceType 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.5 integer read-only
Framer Interface Type. AC INI-Param: N/A Enumeration: 'e1CAS': 1, 'e1FAS': 2, 'e1CRC4': 0, 't12': 5, 't1D4': 3, 't1ESF': 4.
                           acSysSATFramersFramerTransmitControl 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.6 integer read-only
Framer Transmit Control. AC INI-Param: N/A Enumeration: 'systemClock': 0, 'disableTransmit': 2, 'aIS': 1.
                           acSysSATFramersRxStatus 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.7 integer read-only
Provides the alarm status of the clock interface. AC INI-Param: N/A Enumeration: 'aISInit': 4, 'lOSAlarm': 2, 'alarmClear': 0, 'aISAlarm': 3, 'lOFAlarm': 1.
                           acSysSATFramersIsUsedAsPLLClock 1.3.6.1.4.1.5003.9.10.10.4.25.22.1.8 integer read-only
Is Used As PLL Clock indication. AC INI-Param: N/A Enumeration: 'notUsed': 0, 'used': 1.
           acSysTimingModule 1.3.6.1.4.1.5003.9.10.10.4.26
                 acSysPLLStatusTable 1.3.6.1.4.1.5003.9.10.10.4.26.21 no-access
                       acSysPLLStatusEntry 1.3.6.1.4.1.5003.9.10.10.4.26.21.1 no-access
                           acSysPLLStatusIndex 1.3.6.1.4.1.5003.9.10.10.4.26.21.1.1 unsigned32 no-access
Table's Index. AC INI-Param: N/A
                           acSysPLLStatusOperatingMode 1.3.6.1.4.1.5003.9.10.10.4.26.21.1.2 integer read-only
PLL's Current Operating Mode. AC INI-Param: N/A Enumeration: 'lockToRef1': 1, 'lockToLocal': 3, 'freeRun': 0, 'lockToRef2': 2, 'holdOver': 4.