AC-MEDIA-MIB: View SNMP OID List / Download MIB

VENDOR: AUDIOCODES LTD


 Home MIB: AC-MEDIA-MIB
Download as:   
SNMP-FRAMEWORK-MIB, SNMPv2-SMI, AUDIOCODES-TYPES-MIB, RFC1155-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 acMedia 1.3.6.1.4.1.5003.9.10.4
Tok_String
     acMediaConfiguration 1.3.6.1.4.1.5003.9.10.4.1
         acMediaDSPConfig 1.3.6.1.4.1.5003.9.10.4.1.1
             acMediaDSPConfigVersionTemplateNumber 1.3.6.1.4.1.5003.9.10.4.1.1.1
Selects the DSP load number. Each load has a different coder list, a different channel capacity and different features supported. Range = 0 to 255. Access: Offline. AC INI-Param: DSPVERSIONTEMPLATENUMBER
             acMediaDspTable 1.3.6.1.4.1.5003.9.10.4.1.1.21
Tok_String
                   acMediaDspEntry 1.3.6.1.4.1.5003.9.10.4.1.1.21.1
Tok_String
                       acMediaDspIndex 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.1
Entry number in the table. AC INI-Param: DspTemplates_Index
                       acMediaDspRowStatus 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.2
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
                       acMediaDspTemplateNumber 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.3
DSP template number. Access: Offline. AC INI-Param: DspTemplates_DspTemplateNumber
                       acMediaDspResourcesPercentage 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.4
Percentage use for the specified template. Access: Offline. AC INI-Param: DspTemplates_DspResourcesPercentage
         acMediaVoiceConfig 1.3.6.1.4.1.5003.9.10.4.1.2
             acVoice 1.3.6.1.4.1.5003.9.10.4.1.2.1
                 acVoicePayloadFormat 1.3.6.1.4.1.5003.9.10.4.1.2.1.1
Sets the voice payload format. Choose either 0 = RTP or 1 = ATM (which enables working with vendors that use G.726 ATM Payload Format over RTP. Uses the enum acTVoicePayloadFormat. 0 = VoicePayloadFormatRTP 1 = VoicePayloadFormatATM 2 = VoicePAyloadFormatIllegal. Access: Online. AC INI-Param: VOICEPAYLOADFORMAT
                 acVoiceVolume 1.3.6.1.4.1.5003.9.10.4.1.2.1.2
Defines the voice output gain control. Range: -32 dB to +31 dB in 1 dB steps -32 = mute Default = 0 = No Gain. Access: Online. AC INI-Param: VOICEVOLUME
                 acVoiceInputGain 1.3.6.1.4.1.5003.9.10.4.1.2.1.3
Defines the PCM input gain. Range = -32 dB to +31 dB in 1 dB steps. Default = No Gain. Access: Online. AC INI-Param: INPUTGAIN
                 acVoiceTestMode 1.3.6.1.4.1.5003.9.10.4.1.2.1.4
Defines the type of testing mode applied: 0 = Coder Loopback performs an encoder/decoder loopback inside the DSP device 1 = PCM Loopback loops back an incoming PCM to the outgoing PCM. 2 = ToneInjection generates a 1000 Hz tone to the outgoing PCM 3 = NoLoopback sets the channel to work in normal mode. Access: Online. AC INI-Param: TESTMODE
                 acVoiceTTYTransportType 1.3.6.1.4.1.5003.9.10.4.1.2.1.5
Defines the transferring method of TTY signals during a call 0 = Disable 1= Bypass 2 = Relay . Access: Online. AC INI-Param: TTYTRANSPORTTYPE
                 acVoiceEnableMediaSecurity 1.3.6.1.4.1.5003.9.10.4.1.2.1.6
Enables or disables Media Security protocol (SRTP) . Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEMEDIASECURITY
                 acVoiceCoderRate 1.3.6.1.4.1.5003.9.10.4.1.2.1.20
                       acVoiceCoderRateEVRC 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.1
This parameter is used to configure the EVRC coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 4 kbps 3 = 8 kbps. Access: Online. AC INI-Param: EVRCRate
                       acVoiceCoderRateQCELP8 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.2
This parameter is used to configure the QCELP8 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 2 kbps 3 = 4 kbps 4 = 8 kbps. Access: Online. AC INI-Param: QCELP8Rate
                       acVoiceCoderRateQCELP13 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.3
This parameter is used to configure the QCELP13 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 3 kbps 3 = 7 kbps 4 = 13 kbps . Access: Online. AC INI-Param: QCELP13Rate
                       acVoiceCoderRateG729EVMaxBitRate 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.4
Determines the maximum generation bitrate for all participants in a session using G729EV coder. This parameter is defined per session and is equal for all the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVMaxBitRate
                       acVoiceCoderRateG729EVLocalMBS 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.5
Determines the maximal bitrate, which may be used by the G729EV coder at a specific channel. This parameter is defined per channel and may vary between the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVLocalMBS
                       acVoiceCoderRateG729EVReceiveMBS 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.6
Determines the value of the MBS field of the G729EV frames to be sent to the other party. This parameter reflects the maximum bit rate, which the local G729EV supports as a receiver. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVReceiveMBS
                       acVoiceCoderRateMsRtaForwardErrorCorrectionEnable 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.7
Determines the Microsoft RTA coder forward error correction mode. 0 - Disable. 1 - Enable. Access: Online. AC INI-Param: MSRTAForwardErrorCorrectionEnable
                       acVoiceCoderRateMsRtaTxBitRate 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.8
Determines the Microsoft RTA coder TX bit rate. 0 - Automatic. Any value between 8,800 - 29,000. Access: Online. AC INI-Param: MSRTATxBitRate
             acVoiceAGC 1.3.6.1.4.1.5003.9.10.4.1.2.2
                 acVoiceAGCEnable 1.3.6.1.4.1.5003.9.10.4.1.2.2.1
Activates the AGC (Automatic Gain Control). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEAGC
                 acVoiceAGCGainSlope 1.3.6.1.4.1.5003.9.10.4.1.2.2.2
Determines the AGC (Automatic Gain Control) convergence rate. Range = 0 to 31 (according to acTAGCGainSlope) Default = 3 (= 1 db/sec). Access: Online. AC INI-Param: AGCGAINSLOPE
                 acVoiceAGCRedirection 1.3.6.1.4.1.5003.9.10.4.1.2.2.3
Determines the AGC (Automatic Gain Control) direction. 0 = AGC works on signals from the TDM side 1 = AGC works on signals coming from the Network side. Access: Online. AC INI-Param: AGCREDIRECTION
                 acVoiceAGCTargetEnergy 1.3.6.1.4.1.5003.9.10.4.1.2.2.4
Determines the signal energy value [-dBm] that the AGC (Automatic Gain Control) attempts to attain. Range = 0 to 63. Access: Online. AC INI-Param: AGCTARGETENERGY
                 acVoiceAGCMinGain 1.3.6.1.4.1.5003.9.10.4.1.2.2.5
Defines the minimum gain by the AGC when activated [- db]. Range = 0 to -31. Access: Offline. AC INI-Param: AGCMINGAIN
                 acVoiceAGCMaxGain 1.3.6.1.4.1.5003.9.10.4.1.2.2.6
Defines the maximum gain by the AGC when activated [db]. Range = 0 to 18. Access: Offline. AC INI-Param: AGCMAXGAIN
                 acVoiceAGCDisableFastAdaptation 1.3.6.1.4.1.5003.9.10.4.1.2.2.7
Disables the AGC Fast Adaptation mode. Enable = 1 Disable = 0. Access: Offline. AC INI-Param: AGCDISABLEFASTADAPTATION
             acVoiceEC 1.3.6.1.4.1.5003.9.10.4.1.2.3
                 acVoiceECEnable 1.3.6.1.4.1.5003.9.10.4.1.2.3.1
Enables or disables the Echo Canceller. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEECHOCANCELLER
                 acVoiceECMaxLength 1.3.6.1.4.1.5003.9.10.4.1.2.3.2
Defines the maximum board EC (Echo Canceler) length capability. 0 = EC length determined internally to reach maximum channel capacity. 4 = 32 msec 11 = 64 msec 22 = 128 msec TP-1610 only: Using 64 or 128 msec reduces the channel capacity to 200 channels. . Access: Offline. AC INI-Param: MAXECHOCANCELLERLENGTH
                 acVoiceECHybridLoss 1.3.6.1.4.1.5003.9.10.4.1.2.3.3
Sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from hybrid. Set this per worst hybrid in the system in terms of echo return loss. Refer to the enumeration acTECHybridLoss. 0 = 6 dBm 1 = 9 dBm 2 = 0 dBm 3 = 3 dBm. Access: Online. AC INI-Param: ECHYBRIDLOSS
                 acVoiceECToneDetector 1.3.6.1.4.1.5003.9.10.4.1.2.3.4
Used to configure the Echo Canceler Tone Detector. Detects a 2100 Hz tone at the input signal to the TDM (received signal). Improves Echo Canceler operation accordingly. Detects 2100, 2100 with phase reversals and 2100 with AM. Improves the operation of the Echo Canceler by slowing adaptation when the signal is detected. This data is also used by the fax state machine. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableToneDetector
                 acVoiceECComfortNoiseGeneration 1.3.6.1.4.1.5003.9.10.4.1.2.3.5
Use this parameter to enable or enable Echo Canceler Comfort Noise Generation, which generates comfort noise when the Non Linear Processor (NLP) is active. When the NLP ascertains that the signal is echo and not doubletalk and decides to clip, instead of transmitting silence it transmits a synthesized signal similar to the background noise. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableComfortNoiseGeneration
             acVoiceSC 1.3.6.1.4.1.5003.9.10.4.1.2.4
                 acVoiceSCMode 1.3.6.1.4.1.5003.9.10.4.1.2.4.1
Enables or disables Silence Suppression Mode. 0 = Disable = SILENCE_COMPRESION_DISABLE 1 = Enable = SILENCE_COMPRESION_ENABLE 2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE. Access: Online. AC INI-Param: ENABLESILENCECOMPRESSION
                 acVoiceSCVBRCoderDTXMin 1.3.6.1.4.1.5003.9.10.4.1.2.4.2
Defines the minimum number of frames gap between two SID frames, when using the EVRC voice activity detector. . Access: Online. AC INI-Param: EVRCDTXMin
                 acVoiceSCVBRCoderDTXMax 1.3.6.1.4.1.5003.9.10.4.1.2.4.3
Defines the maximum number of frames gap between two SID frames, when using the EVRC voice activity detector. Access: Online. AC INI-Param: EVRCDTXMax
                 acVoiceSCVBRCoderHangover 1.3.6.1.4.1.5003.9.10.4.1.2.4.4
For indicating the desired number of silence frames at the beginning of each silence period, when using the VBR CODER silence suppression. . Access: Online. AC INI-Param: VBRCoderHangover
         acMediaFaxModemConfig 1.3.6.1.4.1.5003.9.10.4.1.3
             acFaxModem 1.3.6.1.4.1.5003.9.10.4.1.3.1
                 acFMCommon 1.3.6.1.4.1.5003.9.10.4.1.3.1.1
                     acFMCommonRelayVolume 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.1
Determines the fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm. Access: Online. AC INI-Param: FAXMODEMRELAYVOLUME
                     acFMCommonV34Transport 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.2
Sets the V.34 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V34MODEMTRANSPORTTYPE
                     acFMCommonEnableInbandNetworkDetection 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.3
Enables or disables inband network detection related to fax/modem. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: EnableFaxModemInbandNetworkDetection
                 acFMBypass 1.3.6.1.4.1.5003.9.10.4.1.3.1.2
                     acFMBypassCoderType 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.1
Users can use this parameter to set the fax/modem bypass coder (according to acTCoders). 0 = G.711 A-Law 1 = G.711 Mu-Law. Access: Online. AC INI-Param: FAXMODEMBYPASSCODERTYPE
                     acFMBypassPacketizationPeriod 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.2
Defines the number of basic frames to generate one RTP fax/modem bypass packet. Access: Online. AC INI-Param: FAXMODEMBYPASSM
                     acFMBypassBasicPacketInterval 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.3
Sets the basic Fax / Modem Bypass RTP packet rate. 0 = Default (set internally) (PACKET_INTERVAL_DEFAULT) 1 = 5 msec (PACKET_INTERVAL_5_MSEC) 2 = 10 msec (PACKET_INTERVAL_10_MSEC) 3 = 20 msec (PACKET_INTERVAL_20_MSEC). Access: Online. AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL
                     acFMBypassDJBufMinDelay 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.4
Determines the Jitter Buffer constant delay (in milliseconds) during a Fax & Modem Bypass session. (The minimum Jitter Buffer Size). Range = 0 to 150. Access: Online. AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY
                     acFMBypassFaxBypassOutputGain 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.5
Defines the fax bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: FaxBypassOutputGain
                     acFMBypassModemBypassOutputGain 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.6
Defines the modem bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: ModemBypassOutputGain
                 acFMNSE 1.3.6.1.4.1.5003.9.10.4.1.3.1.3
                     acFMNSEPayloadType 1.3.6.1.4.1.5003.9.10.4.1.3.1.3.1
Users can use this parameter to modify the NSE packets payload type. Range = 96 to 127. Access: Online. AC INI-Param: NSEPAYLOADTYPE
                     acFMNSEMode 1.3.6.1.4.1.5003.9.10.4.1.3.1.3.2
Enables or disables Ciscos NSE fax / modem automatic pass-through mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NSEMODE
             acFax 1.3.6.1.4.1.5003.9.10.4.1.3.2
                 acFaxTransportMode 1.3.6.1.4.1.5003.9.10.4.1.3.2.1
Sets the Fax over IP transport method. 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: FAXTRANSPORTMODE
                 acFaxBypassPayloadType 1.3.6.1.4.1.5003.9.10.4.1.3.2.2
Users can use this parameter to modify the Fax Bypass Mode RTP packets payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (102). It is the users responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: FAXBYPASSPAYLOADTYPE
                 acFaxRelayECMEnable 1.3.6.1.4.1.5003.9.10.4.1.3.2.3
Enables or disables the using of ECM mode during Fax Relay. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: FAXRELAYECMENABLE
                 acFaxRelayMaxRate 1.3.6.1.4.1.5003.9.10.4.1.3.2.4
Limits the maximum rate at which fax messages are transmitted. 0 = 2400 bps 1 = 4800 bps 2 = 7200 bps 3 = 9600 bps 4 = 12000 bps 5 = 14400 bps 6 = 16800 bps 7 =19200 bps 8 = 21600 bps 9 = 24000 bps 10 = 26400 bps 11 = 28800 bps 12 = 31200 bps 13 = 33600bps. Access: Online. AC INI-Param: FAXRELAYMAXRATE
                 acFaxRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.4.1.3.2.5
Determines the depth of redundancy for fax packets. This parameter is applicable only to non-V.21 packets. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy. Access: Online. AC INI-Param: FAXRELAYREDUNDANCYDEPTH
                 acFaxEnhancedRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.4.1.3.2.6
Determines the number of repetitions to be applied to control packets when using the T.38 standard. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy 3 = 3 packet redundancy 4 = Maximum redundancy. Access: Online. AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH
                 acFaxCNGDetectorMode 1.3.6.1.4.1.5003.9.10.4.1.3.2.7
Determines the CNG Detector mode. 0 = Disable 1 = Relay 2 = Event Only. Access: Online. AC INI-Param: CNGDETECTORMODE
                 acFaxV34TransportMethod 1.3.6.1.4.1.5003.9.10.4.1.3.2.8
Determines the V.34 fax transport method. One of the following values: 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V34FAXTRANSPORTTYPE
                 acFaxT38Version 1.3.6.1.4.1.5003.9.10.4.1.3.2.9
T38 fax relay version. 0 = T.38 version 0 (from 06/1998) 3 = T.38 version 3 (V.34 over T.38 support) Default = 3. Access: Online. AC INI-Param: T38Version
             acModem 1.3.6.1.4.1.5003.9.10.4.1.3.3
                 acModemV22Transport 1.3.6.1.4.1.5003.9.10.4.1.3.3.1
Sets the V.22 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V22MODEMTRANSPORTTYPE
                 acModemV23Transport 1.3.6.1.4.1.5003.9.10.4.1.3.3.2
Sets the V.23 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V23MODEMTRANSPORTTYPE
                 acModemV32Transport 1.3.6.1.4.1.5003.9.10.4.1.3.3.3
Sets the V.32 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V32MODEMTRANSPORTTYPE
                 acModemBypassPayloadType 1.3.6.1.4.1.5003.9.10.4.1.3.3.4
Users can use this parameter to modify the Modem Bypass Mode RTP packets payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (103). It is the users responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: MODEMBYPASSPAYLOADTYPE
                 acModemBellTransportType 1.3.6.1.4.1.5003.9.10.4.1.3.3.5
Use this parameter to set the Bell modem transport method. 0 = Transparent 2 = Bypass (enum ByPassEnable) 3 = Transparent with Events (enum EventsOnly). Access: Online. AC INI-Param: BellModemTransportType
                 acModemV21Transport 1.3.6.1.4.1.5003.9.10.4.1.3.3.6
Sets the V.21 modem transport method (must be set to 0 = Disable). 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V21ModemTransportType
                 acModemEnableV150ModemRelaySupport 1.3.6.1.4.1.5003.9.10.4.1.3.3.7
Determines whether to enable V.150.1 modem relay support. Range: 0 - Disable 1 - Enable. Access: Offline. AC INI-Param: EnableV150ModemRelaySupport
             acV150dot1 1.3.6.1.4.1.5003.9.10.4.1.3.4
                 acV150dot1AllocationProfile 1.3.6.1.4.1.5003.9.10.4.1.3.4.1
Selects the V.150.1 profile, determining how many DSP channels have V.150.1 support. Range = 0 to 3. Access: Offline. AC INI-Param: V1501AllocationProfile
                 acV150dot1SSEPayloadTypeRx 1.3.6.1.4.1.5003.9.10.4.1.3.4.2
SSE payload type RX. Access: Online. AC INI-Param: V1501SSEPayloadTypeRx
                 acV150dot1SSEPayloadTypeTx 1.3.6.1.4.1.5003.9.10.4.1.3.4.3
SSE payload type TX. Access: Online. AC INI-Param: V1501SSEPayloadTypeTx
                 acV150dot1SSERedundancyDepth 1.3.6.1.4.1.5003.9.10.4.1.3.4.4
SSE is a part of V150.1 modem relay protocol and SSE messages are sent over RTP. SSE redundancy refers to the sending of SSE messages several times to increase reliability. This parameter determines the number of times each SSE message is to be resent. Access: Online. AC INI-Param: V1501SSERedundancyDepth
                 acV150dot1SPRTPayloadTypeRx 1.3.6.1.4.1.5003.9.10.4.1.3.4.5
SPRT payload type RX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeRx
                 acV150dot1SPRTPayloadTypeTx 1.3.6.1.4.1.5003.9.10.4.1.3.4.6
SPRT payload type TX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeTx
                 acV150dot1SPRTTransportChannel0MaxPayloadSize 1.3.6.1.4.1.5003.9.10.4.1.3.4.7
SPRT transport channel 0 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize
                 acV150dot1SPRTTransportChannel2MaxPayloadSize 1.3.6.1.4.1.5003.9.10.4.1.3.4.8
SPRT transport channel 2 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize
                 acV150dot1SPRTTransportChannel2MaxWindowSize 1.3.6.1.4.1.5003.9.10.4.1.3.4.9
SPRT transport channel 2 max window size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize
                 acV150dot1SPRTTransportChannel3MaxPayloadSize 1.3.6.1.4.1.5003.9.10.4.1.3.4.10
SPRT transport channel 3 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize
         acMediaRtpRtcpConfig 1.3.6.1.4.1.5003.9.10.4.1.4
             acRtpRtcp 1.3.6.1.4.1.5003.9.10.4.1.4.1
                 acRtpRtcpBrokenConnectionEventTimeout 1.3.6.1.4.1.5003.9.10.4.1.4.1.1
Determines for how long the RTP connection should be broken before the Broken Connection event is issued. In units of 100 msec. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT
                 acRtpRtcpBrokenConnectionEventActivationMode 1.3.6.1.4.1.5003.9.10.4.1.4.1.2
Determines if the broken connection mechanism is activated when the RTP stream is activated or when the first RTP packet is received. 0 = After First incoming packet (default) 1 = Upon channels RTP activation. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE
                 acRtpRtcpBasicRTPPacketInterval 1.3.6.1.4.1.5003.9.10.4.1.4.1.3
Selects the RTP packet rate for sample based coders (such as G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728. 0 = Default (set internally) 1 = 5 msec 2 = 10 msec 3 = 20 msec. Access: Online. AC INI-Param: BASICRTPPACKETINTERVAL
                 acRtpRtcpConnectionEstablishNotificationMode 1.3.6.1.4.1.5003.9.10.4.1.4.1.4
Determines the notification mode for the RTP connection establishment event acEV_CONNECTION_ESTABLISHED. 0 = Notify only after a broken connection event 1 = Also notify when the first RTP packet is received. Access: Online. AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE
                 acRtpRtcpEnableMediaUDPChecksum 1.3.6.1.4.1.5003.9.10.4.1.4.1.5
Determines whether to enable the UDP checksum calculation for RTP media TX over IPv4. One of the following possible values: 0 = Disable (No checksum: UDP checksum for IPv4 TX = 0) 1 = Enable (UDP checksum will be in the UDP header upon IPv4 TX) . Access: Offline. AC INI-Param: EnableMediaUDPChecksum
             acRtp 1.3.6.1.4.1.5003.9.10.4.1.4.2
                 acRtpBaseUDPPort 1.3.6.1.4.1.5003.9.10.4.1.4.2.1
Defines the lower boundary of UDP ports to be used by the board. The upper boundary is calculated on the basis of BoardBaseUDPPort + 10 * (Number of Channels). This parameter value must be a multiple of 10. . Access: Offline. AC INI-Param: BASEUDPPORT
                 acRtpComfortNoiseEnable 1.3.6.1.4.1.5003.9.10.4.1.4.2.2
When set to 1 (Enable), SID packets are sent with the RTP SID type (RFC 3389). 0 = Disable 1 = Enable Determines whether Silence Indicator (SID) packets that are sent and received are according to RFC 3389. 0 = Disabled (default). 1 = Enabled. Note: Applicable only to MP-11x and Mediant 1000. . Access: Online. AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE
                 acRtpEnableRFC2658Interleaving 1.3.6.1.4.1.5003.9.10.4.1.4.2.3
When enabled, RTP packets include an interleaving byte for VBR coders. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLERFC2658INTERLEAVING
                 acRtpRxTxMode 1.3.6.1.4.1.5003.9.10.4.1.4.2.4
Selects which RTP directions are enabled. Both Tx and Rx sides can be disabled. 0 = RTPTxRx 1 = RTPTxOnly 2 = RTPRxOnly 3 = RTPUnactive 4 = RTPRxRFC2833Tx. Access: Online. AC INI-Param: RTPDIRECTIONCONTROL
                 acRtpRFC2833TxPayloadType 1.3.6.1.4.1.5003.9.10.4.1.4.2.5
Controls the RFC 2833 Tx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833TXPAYLOADTYPE
                 acRtpRFC2833RxPayloadType 1.3.6.1.4.1.5003.9.10.4.1.4.2.6
Controls the RFC 2833 Rx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833RXPAYLOADTYPE
                 acRtpRedundancyPayloadType 1.3.6.1.4.1.5003.9.10.4.1.4.2.7
This parameter sets the RFC 2198 (RTP Redundancy) packets parameter RTP Payload Type. Range: 96 to 127. Access: Online. AC INI-Param: RFC2198PAYLOADTYPE
                 acRtpRedundancyDepth 1.3.6.1.4.1.5003.9.10.4.1.4.2.8
Redundancy depth of RFC 2198 redundancy packets. 0 = No redundancy 1 = Redundacny depth. Access: Online. AC INI-Param: RTPREDUNDANCYDEPTH
                 acRtpPacketizationFactor 1.3.6.1.4.1.5003.9.10.4.1.4.2.9
Defines the number of DSP payloads for generating one RTP packet. Range = Hardware dependent. Access: Online. AC INI-Param: RTPPACKINGFACTOR
                 acRtpNoOpPayloadType 1.3.6.1.4.1.5003.9.10.4.1.4.2.10
User can modify the Noop packets RTP Payload type by setting this parameter. Range = 96 to 127. Access: Online. AC INI-Param: RTPNOOPPAYLOADTYPE
                 acRtpNoOpEnable 1.3.6.1.4.1.5003.9.10.4.1.4.2.11
Enables / disable Noop packets sending mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: RTPNOOPENABLE
                 acRtpNoOpInterval 1.3.6.1.4.1.5003.9.10.4.1.4.2.12
Used to modify the Noop packets sending interval Parameter value is in milliseconds Default value = 10 sec (10000 msec) Range = 20 to 600000 (20 msec to 10 min - 10 min = 600000). Access: Online. AC INI-Param: RTPNOOPINTERVAL
                 acRtpVBRCoderHeaderFormat 1.3.6.1.4.1.5003.9.10.4.1.4.2.13
0 - payload only (no header, no toc, no m-factor) 1- support RFC 2658 format, 1 byte for interleaving header (always 0) and toc, no m-factor 2- payload including toc only, allow m-factor 3- RFC 3358 format . Access: Online. AC INI-Param: VBRCoderHeaderFormat
                 acRtpAMRCoderHeaderFormat 1.3.6.1.4.1.5003.9.10.4.1.4.2.14
AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame contains CRM byte and toc RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables RFC_3267_INTERLEAVING=2 - supported as receivers only. Access: Online. AC INI-Param: AMRCODERHEADERFORMAT
                 acRtpAMRFECRedundancyDepth 1.3.6.1.4.1.5003.9.10.4.1.4.2.15
Sets the AMR / WB-AMR Redundancy depth according to RFC 3267. 0 = No Redundancy 1 = Redundancy depth of a single packet 2 = Redundancy depth of 2 packets 3 = Redundancy depth of 3 packets . Access: Online. AC INI-Param: AMRFECREDUNDANCYDEPTH
                 acRtpAMRFECNumOfMngtPolicyEntries 1.3.6.1.4.1.5003.9.10.4.1.4.2.16
Sets the number of entries to be defined at the AMR management policy table. Each entry defines the policy of a different rate. Access: Online. AC INI-Param: AMRFECNUMBEROFCODECMODES
                 acRtpAMRFECDelayHysteresis 1.3.6.1.4.1.5003.9.10.4.1.4.2.17
Defines the hysteresis of the Delay Threshold for AMR Hand-out events (in msec). Access: Online. AC INI-Param: AMRFECDELAYHYSTERESIS
                 acRtpAMRFECDelayThreshold 1.3.6.1.4.1.5003.9.10.4.1.4.2.18
Defines the one-way delay value (in msec) that may cause the AMR Hand Out report. 0 = Hand Out report is disabled (default). Access: Online. AC INI-Param: AMRFECDELAYTHRESHHOLD
                 acRtpQcelpCoderHeaderFormat 1.3.6.1.4.1.5003.9.10.4.1.4.2.19
Determines whether to define a separate header format for the QCELP coder (different to the header format of EVRC coder). One of the following values: -1 - QCELP coder uses the same header format as EVRC coder, according to VBRCoderHeaderFormat parameter. 1 to 2 - QCELP coder uses the value defined by this parameter to define its header format. This parameter is relevant only for Control Protocol users. TPNCP and PCI users should always use -1 value. Access: Instant. AC INI-Param: QcelpCoderHeaderFormat
                 acAMRFECCodecPolicies 1.3.6.1.4.1.5003.9.10.4.1.4.2.21
                       acAMRFECCodecPoliciesTable 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1
Tok_String
                           acAMRFECCodecPoliciesEntry 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1
Tok_String
                               acAMRFECCodecPoliciesIndex 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.1
AC INI-Param: AMRFECCodecPolicies_Index
                               acAMRFECCodecPoliciesRowStatus 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.2
AC INI-Param: N/A
                               acAMRFECCodecPoliciesRate 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.3
AMR Rate x of policy x (values 0-8). Access: Offline. AC INI-Param: AMRFECCodecPolicies_Rate
                               acAMRFECCodecPoliciesRedundancyLevel 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.4
Redundancy Level for policy x. Same values as RFC 3267 Redundancy field. Access: Offline. AC INI-Param: AMRFECCodecPolicies_RedundancyLevel
                               acAMRFECCodecPoliciesThreshold 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.5
FLR (Frame Loss Ratio) threshold of policy 1. Values are taken from 3GPP TS 44.318 (0-63). Access: Offline. AC INI-Param: AMRFECCodecPolicies_Threshold
                               acAMRFECCodecPoliciesHysteresis 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.6
Hysteresis of FLR threshold for policy 1. Values are taken from 3GPP TS 44.318. (0-15). Access: Offline. AC INI-Param: AMRFECCodecPolicies_Hysteresis
             acRtcp 1.3.6.1.4.1.5003.9.10.4.1.4.3
                 acRtcpDisableIntervalRandomization 1.3.6.1.4.1.5003.9.10.4.1.4.3.1
Controls whether RTCP report intervals are randomized or whether each report interval accords exactly to the parameter defining RTCP Mean Tx Interval (in milliseconds). 0 = Randomize 1 = Dont Randomize. Access: Online. AC INI-Param: DISABLERTCPRANDOMIZE
             acRtcpXr 1.3.6.1.4.1.5003.9.10.4.1.4.4
                 acRtcpXrBurstThreshold 1.3.6.1.4.1.5003.9.10.4.1.4.4.1
voice quality monitoring - excessive burst alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONBURSTHR
                 acRtcpXrDelayThreshold 1.3.6.1.4.1.5003.9.10.4.1.4.4.2
voice quality monitoring - excessive delay alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONDELAYTHR
                 acRtcpXrEndOofCallRvalDelayThreshold 1.3.6.1.4.1.5003.9.10.4.1.4.4.3
voice quality monitoring - end of call low quality alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONEOCRVALTHR
                 acRtcpXrGMin 1.3.6.1.4.1.5003.9.10.4.1.4.4.4
voice quality monitoring - minimum gap size (number of frames). Access: Online. AC INI-Param: VQMONGMIN
                 acRtcpXrEnable 1.3.6.1.4.1.5003.9.10.4.1.4.4.5
Enable voice quality monitoring and RTCP xr reports. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: VQMONENABLE
             acVideoRtpRtcp 1.3.6.1.4.1.5003.9.10.4.1.4.5
                 acVideoRtpRtcpDisableRtcpIntervalRandomization 1.3.6.1.4.1.5003.9.10.4.1.4.5.1
Determines whether to enable RTCP Interval Randomization. One of the following values: 0 Enable RTCP Interval Randomization 1 Disable RTCP Interval Randomization . Access: Online. AC INI-Param: VideoDisableRtcpIntervalRandomization
                 acVideoRtpRtcpMeanTxInterval 1.3.6.1.4.1.5003.9.10.4.1.4.5.2
Defines the mean interval between two transmitted RTCP packets (milliseconds). If the interval is set to 0, no RTCP packets are transmitted at all. Access: Online. AC INI-Param: VideoRtcpMeanTxInterval
                 acVideoRtpRtcpBrokenConnectionActivationMode 1.3.6.1.4.1.5003.9.10.4.1.4.5.3
Broken connection event activation mode. 0 - Activate broken connection after the arrival of the first RTP packet. 1 - Activate broken connection immediately after the Activate RTP command. . Access: Online. AC INI-Param: VideoBrokenConnectionActivationMode
                 acVideoRtpRtcpBrokenConnectionEventTimeout 1.3.6.1.4.1.5003.9.10.4.1.4.5.4
Timeout that defines when broken connection event occurs. Time resolution is 20msec. Access: Online. AC INI-Param: VideoBrokenConnectionEventTimeout
         acMediaIBSConfig 1.3.6.1.4.1.5003.9.10.4.1.5
             acIBS 1.3.6.1.4.1.5003.9.10.4.1.5.1
                 acIBSAnalogSignalTransportType 1.3.6.1.4.1.5003.9.10.4.1.5.1.1
Determines the analog signal transport type. 0 = Ignore 1 = Transfer hookflash via RFC 2833. Access: Online. AC INI-Param: ANALOGSIGNALTRANSPORTTYPE
                 acIBSDTMFVolume 1.3.6.1.4.1.5003.9.10.4.1.5.1.2
Defines and controls the DTMF generation volume [-dBm]. Range = -31 to 0. Access: Online. AC INI-Param: DTMFVOLUME
                 acIBSDTMFTransportType 1.3.6.1.4.1.5003.9.10.4.1.5.1.3
Defines the type of DTMF transport. 0 = Erase DTMFs from voice transport not relayed to remote 2 = DTMFs not erased are not relayed to remote 3 = DTMFs are muted from the voice stream and relayed according to RFC 2833 7 = DTMFs are sent according to RFC 2833 and muted when received. Access: Online. AC INI-Param: DTMFTRANSPORTTYPE
                 acIBSMFTransportType 1.3.6.1.4.1.5003.9.10.4.1.5.1.4
Defines the type of MF transport. 0 = Erase MFs from voice transport not relayed to remote 2 = MFs not erased are not relayed to remote 3 = MFs are muted from the voice stream and relayed according to RFC 2833. Access: Online. AC INI-Param: MFTRANSPORTTYPE
                 acIBSTrunkTestingTonesEnable 1.3.6.1.4.1.5003.9.10.4.1.5.1.5
Enables or disables trunk testing tones. 0 = Disables trunk testing tones 1 = Enables trunk testing tones. Access: Offline. AC INI-Param: ENABLETRUNKTESTINGTONES
                 acIBSCASRelayTransportMode 1.3.6.1.4.1.5003.9.10.4.1.5.1.6
Controls the ABCD signaling transport type over IP. 0 = No Relay over the network 1 = Enable CAS relay according to RFC 2833. Access: Online. AC INI-Param: CASTRANSPORTTYPE
                 acIBSRxDtmfHangOverTime 1.3.6.1.4.1.5003.9.10.4.1.5.1.7
Used to configure the Voice Silence time (in ms units) after playing DTMF or MF digits to the TDM side that arrived as Relay from the Network side. Range from 0 to 2000, Default 1000. Access: Online. AC INI-Param: RxDtmfHangOverTime
                 acIBSTxDtmfHangOverTime 1.3.6.1.4.1.5003.9.10.4.1.5.1.8
Voice Silence time (in ms units) after detecting the end of DTMF or MF digits at the TDM side when the DTMF Transport Type is either Relay or Mute.This feature allows the user to configure the silence time. . Access: Online. AC INI-Param: TxDtmfHangOverTime
                 acIBSDTMFTwistControl 1.3.6.1.4.1.5003.9.10.4.1.5.1.9
Defines a delta (in dB) between the high and low frequency component in the DTMF signal. dB Positive values cause the higher frequency component to be stronger than the lower one. Negative values cause the opposite effect. For any parameter value, both components change so that their average is constant. Range = -10 to 10. Access: Offline. AC INI-Param: DTMFGenerationTwist
                 acIBSNTEMaxDuration 1.3.6.1.4.1.5003.9.10.4.1.5.1.10
Maximal time for sending NTEs (Named Telephony Events) to the network, regardless of the time range when the TDM signal is detected. -1= NTE will stop only upon detection of End event (default). Access: Online. AC INI-Param: NTEMaxDuration
             acIBSDetectors 1.3.6.1.4.1.5003.9.10.4.1.5.2
                 acIBSDetectorsMFR1Enable 1.3.6.1.4.1.5003.9.10.4.1.5.2.1
Enables or disables detection of MFR1 signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR1DETECTORENABLE
                 acIBSDetectorsMFR2ForwardEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.2
Enables or disables detection of MFR2 forward signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR2FORWARDDETECTORENABLE
                 acIBSDetectorsMFR2BackwardEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.3
Enables or disables detection of MFR2 backward signaling. Access: Online. AC INI-Param: MFR2BACKWARDDETECTORENABLE
                 acIBSDetectorsR1LineEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.4
Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R1LINEDETECTORENABLE
                 acIBSDetectorsR2LineEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.5
Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R2LINEDETECTORENABLE
                 acIBSDetectorsAC15Enable 1.3.6.1.4.1.5003.9.10.4.1.5.2.6
Enables or disables detection of Line signaling. Access: Online. AC INI-Param: AC15DETECTORENABLE
                 acIBSDetectorsDTMFEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.7
Enables or disables detection of DTMF signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: DTMFDETECTORENABLE
                 acIBSDetectorsCallProgressEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.8
Enables or disables detection of Call Progress Tones. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: CALLPROGRESSDETECTORENABLE
                 acIBSDetectorsUserDefinedToneEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.9
Enables or disables detection of User Defined Tones signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: USERDEFINEDTONEDETECTORENABLE
                 acIBSDetectorsDetectionRedirection 1.3.6.1.4.1.5003.9.10.4.1.5.2.10
Determines the IBS (In-Band Signaling) Detection Direction. 0 = PCM 1 = Network. Access: Online. AC INI-Param: IBSDETECTIONREDIRECTION
                 acIBSDetectorsSS4Enable 1.3.6.1.4.1.5003.9.10.4.1.5.2.11
Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS4DETECTORENABLE
                 acIBSDetectorsMFSS5Enable 1.3.6.1.4.1.5003.9.10.4.1.5.2.12
Enables or disables detection of MF SS5 line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFSS5DETECTORENABLE
                 acIBSDetectorsSS5Enable 1.3.6.1.4.1.5003.9.10.4.1.5.2.13
Detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS5DETECTORENABLE
                 acIBSDetectorsSITEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.14
Enables or disables SIT (Special Information Tone) detection according to the ITU-T recommendation E.180/Q.35. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: SITDETECTORENABLE
                 acIBSDetectorsCOTEnable 1.3.6.1.4.1.5003.9.10.4.1.5.2.15
Enables or disables Continuity Test tone detection and generation according to the ITU-T Q.724 recommendation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLECONTINUITYTONES
                 acIBSDetectorsR1DetectionStandard 1.3.6.1.4.1.5003.9.10.4.1.5.2.16
This parameter determines which one of the R1 MF protocol flavors will be used for detection. 0 = ITU 1 = R1.5. Access: Offline. AC INI-Param: R1DetectionStandard
                 acIBSDetectorsUDTDetectorFrequencyDeviation 1.3.6.1.4.1.5003.9.10.4.1.5.2.17
Defines the deviation allowed for the detection of each signal frequency. Units are in Hertz. Valid values range 1-50. Default value 50 Hz. . Access: Offline. AC INI-Param: UDTDETECTORFREQUENCYDEVIATION
                 acIBSDetectorsCPTDetectorFrequencyDeviation 1.3.6.1.4.1.5003.9.10.4.1.5.2.18
Defines the deviation allowed for the detection of each CPT signal frequency. Units are in Hertz. Valid values range 1-30. Default value 10 Hz. . Access: Offline. AC INI-Param: CPTDETECTORFREQUENCYDEVIATION
         acIPMediaConfig 1.3.6.1.4.1.5003.9.10.4.1.6
             acIPMedia 1.3.6.1.4.1.5003.9.10.4.1.6.1
                 acIPMediaDSPDetectorsEnable 1.3.6.1.4.1.5003.9.10.4.1.6.1.1
Enables or disables DSP IP Media Detectors. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEDSPIPMDETECTORS
             acIPMAnswerDetector 1.3.6.1.4.1.5003.9.10.4.1.6.2
                 acIPMAnswerDetectorEnable 1.3.6.1.4.1.5003.9.10.4.1.6.2.1
Enables or disables activation of the AD (Answer Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEANSWERDETECTOR
                 acIPMAnswerDetectorActivityDelay 1.3.6.1.4.1.5003.9.10.4.1.6.2.2
Controls (in 100 msec resolution) the time between sending Activation command (AnswerDetector = 1) and the time that the detector actually starts to work. Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORACTIVITYDELAY
                 acIPMAnswerDetectorSilenceTime 1.3.6.1.4.1.5003.9.10.4.1.6.2.3
This parameter controls the silence time period (in 100 msec resolution) from no speech input until the END_OF_SPEECH event is sent. 10 = 1 second Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORSILENCETIME
                 acIPMAnswerDetectorRedirection 1.3.6.1.4.1.5003.9.10.4.1.6.2.4
Determines the AD (Answer Detector) Redirection. 0 (PCM) = Speech from the PCM side is detected 1 (Network) = Speech from the IP side is detected. Access: Online. AC INI-Param: ANSWERDETECTORREDIRECTION
                 acIPMAnswerDetectorSensitivity 1.3.6.1.4.1.5003.9.10.4.1.6.2.5
Controls the AD (Answer Detector) sensitivity. The allowed values are different for different boards: DSP Gen2-based products: range 0 - 2, default 0. DSP Gen2-based products: range 0 - 7, default 3. Lowest value matches highest sensitivity and vice versa. Access: Online. AC INI-Param: ANSWERDETECTORSENSITIVITY
             acIPMEnergyDetector 1.3.6.1.4.1.5003.9.10.4.1.6.3
                 acIPMEnergyDetectorEnable 1.3.6.1.4.1.5003.9.10.4.1.6.3.1
Activates the ED (Energy Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEENERGYDETECTOR
                 acIPMEnergyDetectorQualityFactor 1.3.6.1.4.1.5003.9.10.4.1.6.3.2
Determines the EDs (Energy Detectors) sensitivity (0 -10). 0 = Insensitive 10 = Most Sensitive Range = 0 to 10. Access: Online. AC INI-Param: ENERGYDETECTORQUALITYFACTOR
                 acIPMEnergyDetectorThreshold 1.3.6.1.4.1.5003.9.10.4.1.6.3.3
Defines the EDs (Energy Detectors) threshold. A signal exceeding the threshold invokes an Above or Below event. ActualThreshold = -44 dBm + (EDThreshold * 6) Default = 3 = -26 dBm Range: 0 to 7. Access: Online. AC INI-Param: ENERGYDETECTORTHRESHOLD
                 acIPMEnergyDetectorEnergyRedirection 1.3.6.1.4.1.5003.9.10.4.1.6.3.4
Selects the direction of the energy detection. 0 = Detect from the TDM side 1 = Detect from the network side. Access: Online. AC INI-Param: ENERGYDETECTORREDIRECTION
             acIPMediaPatternDetector 1.3.6.1.4.1.5003.9.10.4.1.6.4
                 acIPMediaPatternDetectorEnable 1.3.6.1.4.1.5003.9.10.4.1.6.4.1
Enables or disables activation of the PD (Pattern Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEPATTERNDETECTOR
                 acIPMediaPatternDetectorDetectionThreshold 1.3.6.1.4.1.5003.9.10.4.1.6.4.2
Defines the number of consecutive patterns to trigger the pattern detection event. Range = 0 to 31. Access: Offline. AC INI-Param: PDTHRESHOLD
             acIPMediaAMD 1.3.6.1.4.1.5003.9.10.4.1.6.5
                 acIPMediaAMDDetectionDirection 1.3.6.1.4.1.5003.9.10.4.1.6.5.1
Determines the AMD (Answer Machine Detector) detection direction. One of the following values: 0 = Detection from the TDM side 1 = Detection from the Network side. Access: Online. AC INI-Param: AMDDETECTIONDIRECTION
                 acIPMediaAMDSensitivity 1.3.6.1.4.1.5003.9.10.4.1.6.5.2
Determines the AMD (Answer Machine Detector) detection sensitivity: 0 = Best detection of an answering machine 7 = Best detection of a live call. Access: Online. AC INI-Param: AMDDetectionSensitivity
                 acIPMediaAMDDetectionSensitivityHighResolution 1.3.6.1.4.1.5003.9.10.4.1.6.5.3
Determines the AMD (Answer Machine Detector) high resolution detection sensitivity. The high resolution has 16 levels of sensitivity while the normal resolution (Answer Machine Detector Sensitivity) has 8 levels. 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDDetectionSensitivityHighResolution
                 acIPMediaAMDSensitivityResolution 1.3.6.1.4.1.5003.9.10.4.1.6.5.4
Determines the AMD (Answer Machine Detector) detection sensitivity resolution: 0 = Normal detection sensitivity resolution (8 sensitivity levels) 1 = High detection sensitivity resolution (16 sensitivity levels). Access: Online. AC INI-Param: AMDSensitivityResolution
                 acIPMediaAMDBeepDetectionTimeout 1.3.6.1.4.1.5003.9.10.4.1.6.5.5
Determines the AMD (Answer Machine Detector) Beep detection timeout. Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds). Access: Online. AC INI-Param: AMDBeepDetectionTimeout
                 acIPMediaAMDBeepDetectionSensitivity 1.3.6.1.4.1.5003.9.10.4.1.6.5.6
Determines the AMD (Answer Machine Detector) Beep detection sensitivity. 0 - Least sensitive. 3 - Most sensitive. Access: Online. AC INI-Param: AMDBeepDetectionSensitivity
             acIPMConference 1.3.6.1.4.1.5003.9.10.4.1.6.6
                 acIPMConferenceGASNMinInterval 1.3.6.1.4.1.5003.9.10.4.1.6.6.1
Minimum interval between Active Speaker Notification (ASN) events. An ASN event reports on the active speakers in a conference. The event is issued whenever the active speakers change. units = 100 ms Minimum configurable interval between events is 500 ms (5 units). Access: Instant. AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL
                 acIPMConferenceEnergythreshold 1.3.6.1.4.1.5003.9.10.4.1.6.6.2
Conference - Minimum energy level for a user to be included in Active Speaker Notification (ASN) events (units: -dBm). Valid range 0 to (-39) dbm. Access: Instant. AC INI-Param: ActiveSpeakerEnergyThreshold
                 acIPMConferenceEnableHDConference 1.3.6.1.4.1.5003.9.10.4.1.6.6.3
Enable\Disable HD Conference. Access: Offline. AC INI-Param: EnableHDConference
             acIPMVideoConference 1.3.6.1.4.1.5003.9.10.4.1.6.7
                 acIPMVideoConferenceSwitchingInterval 1.3.6.1.4.1.5003.9.10.4.1.6.7.1
Determines the video view rotation interval in seconds. Applicable when using timer trigger switching mode. Access: Online. AC INI-Param: VideoConferenceSwitchingInterval
                 acIPMVideoConferenceEnableActiveSpeakerHighlight 1.3.6.1.4.1.5003.9.10.4.1.6.7.2
Highlights the speaker for participants viewing a symmetric layout (2x2 or 3x3) . 0 - Dont highlight active speaker. 1 - Highlight active speaker. Access: Online. AC INI-Param: VideoEnableActiveSpeakerHighlight
                 acIPMVideoConferenceParticipantType 1.3.6.1.4.1.5003.9.10.4.1.6.7.3
Indicates a participants capabilities in the conference. Regular (2) - Regular participant who is able to both send and receive video. . Access: Online. AC INI-Param: VideoConferenceParticipantType
                 acIPMVideoConferenceParticipantTriggerMode 1.3.6.1.4.1.5003.9.10.4.1.6.7.4
Participant trigger mode defines the trigger for modifying the participants view. Voice Activated Video Switch (0) - A participants view will be changed according to the active speakers detection. Timer (1) - A participants view is rotated every configured time among the different video participants in the conference. Fixed (3) - A participants view is fixed. . Access: Online. AC INI-Param: VideoConferenceParticipantTriggerMode
                 acIPMVideoConferenceParticipantLayout 1.3.6.1.4.1.5003.9.10.4.1.6.7.5
Indicates the participants view layout. 1 user (0). 2*2 users (1). All same size. 3*3 users (2). All same size. . Access: Online. AC INI-Param: VideoConferenceParticipantLayout
                 acIPMVideoConferenceEnableConferenceParticipantSelfView 1.3.6.1.4.1.5003.9.10.4.1.6.7.6
Self view indication. 0 - The participant cannot view himself 1 - The participant can view himself. Access: Online. AC INI-Param: VideoEnableConferenceParticipantSelfView
         acMediaCallerIDConfig 1.3.6.1.4.1.5003.9.10.4.1.7
             acCallerID 1.3.6.1.4.1.5003.9.10.4.1.7.1
                 acCallerIDTypes 1.3.6.1.4.1.5003.9.10.4.1.7.1.1
Defines the supported Caller ID standard. 0 = Bellcore 1 = ETSI 2 = NTT 4 = British 16 = ETSI_ETS 17 = Denmark 18 = Indian 19 = Brazilian. Access: Online. AC INI-Param: CALLERIDTYPE
                 acCallerIDTransportType 1.3.6.1.4.1.5003.9.10.4.1.7.1.2
Defines the CallerID Transport type. 0 = Disable 1 = Relay 3 = Mute. Access: Online. AC INI-Param: CallerIDTransportType
                 acCallerIDDTMFBasedMaxDigits 1.3.6.1.4.1.5003.9.10.4.1.7.1.3
Determines the maximum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MAXDTMFDIGITSINCIDSTRING
                 acCallerIDDTMFBasedMinDigits 1.3.6.1.4.1.5003.9.10.4.1.7.1.4
Determines the mimumum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MINDTMFDIGITSINCIDSTRING
                 acCallerIDNTTDIDSignallingForm 1.3.6.1.4.1.5003.9.10.4.1.7.1.5
Configures the signalling format used when generating an NTT DID. 0 = FSK Siganl 1 = DTMF Based Signal. Access: Online. AC INI-Param: NTTDIDSignallingForm
         acMediaNetworkConfig 1.3.6.1.4.1.5003.9.10.4.1.8
             acMediaNetwork 1.3.6.1.4.1.5003.9.10.4.1.8.1
                 acMediaNetworkDisableNAT 1.3.6.1.4.1.5003.9.10.4.1.8.1.1
Enables or disables the NAT feature. 0 = Do not disable NAT 1 = Disable NAT. Access: Online. AC INI-Param: DISABLENAT
                 acMediaNetworkRtpIpTos 1.3.6.1.4.1.5003.9.10.4.1.8.1.2
Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration. Access: Instant. AC INI-Param: IPTOS
                 acMediaNetworkRtpIpPrecedence 1.3.6.1.4.1.5003.9.10.4.1.8.1.3
Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration. Access: Instant. AC INI-Param: IPPRECEDENCE
                 acMediaNetworkIPDiffServ 1.3.6.1.4.1.5003.9.10.4.1.8.1.4
Defines the value of the DiffServ field in the IP header for media (RTP) traffic. Range: 0 to 63. Access: Instant. AC INI-Param: IPDIFFSERV
                 acMediaNetworkInboundLatchMode 1.3.6.1.4.1.5003.9.10.4.1.8.1.5
Determines the way of handling incoming media packets from non-expected address/port. Access: Online. AC INI-Param: InboundMediaLatchMode
         acMediaJBConfig 1.3.6.1.4.1.5003.9.10.4.1.9
             acJitterBuffer 1.3.6.1.4.1.5003.9.10.4.1.9.1
                 acJitterBufferMinDelay 1.3.6.1.4.1.5003.9.10.4.1.9.1.1
Defines the Dynamic Jitter Buffer Minimum Delay (in msec). Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFMINDELAY
                 acJitterBufferOptFactor 1.3.6.1.4.1.5003.9.10.4.1.9.1.2
Defines the Dynamic Jitter Buffer frame error/delay optimization. Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFOPTFACTOR
             acVideoJitterBuffer 1.3.6.1.4.1.5003.9.10.4.1.9.2
                 acVideoJitterBufferMinDelay 1.3.6.1.4.1.5003.9.10.4.1.9.2.1
Jitter buffer minimum delay in milliseconds. Must be less than JitterBufferMaxDelay. Access: Online. AC INI-Param: VideoJitterBufferMinDelay
                 acVideoJitterBufferMaxDelay 1.3.6.1.4.1.5003.9.10.4.1.9.2.2
Jitter buffer maximum delay in milliseconds. Access: Online. AC INI-Param: VideoJitterBufferMaxDelay
                 acVideoJitterBufferDJBOptimizationFactor 1.3.6.1.4.1.5003.9.10.4.1.9.2.3
JB Optimization Factor controls the jitter buffers adaptation rates A High factor means fast adaptation when jitter increases, and a slow adaptation when jitter decrease. Small factor means slow adaptation when jitter increases, and a fast adaptation when jitter decreases. . Access: Online. AC INI-Param: VideoDJBOptimizationFactor
         acMediaAggregation 1.3.6.1.4.1.5003.9.10.4.1.10
               acMediaAggregationRemoteBaseUDPPort 1.3.6.1.4.1.5003.9.10.4.1.10.1
Remote Base UDP Port For Aggrigation. Access: Offline. AC INI-Param: REMOTEBASEUDPPORT
               acMediaAggregationL1L1ComplexRxUDPPort 1.3.6.1.4.1.5003.9.10.4.1.10.2
The UDP port for the incoming (from the remote side) and the outgoing (destination UDP) packets, for Complex Multiplexed RTP mode. Access: Offline. AC INI-Param: L1L1ComplexRxUDPPort
               acMediaAggregationL1L1ComplexTxUDPPort 1.3.6.1.4.1.5003.9.10.4.1.10.3
The Source UDP port for the outgoing UDP Multiplexed RTP packets, for Complex-Multiplex RTP mode. Access: Offline. AC INI-Param: L1L1ComplexTxUDPPort
         acStreamingCache 1.3.6.1.4.1.5003.9.10.4.1.11
               acStreamingCacheSize 1.3.6.1.4.1.5003.9.10.4.1.11.1
Sets the streaming cache size in MBs. The remaining size (out of 32MBs) is used as VoicePrompt storage. Access: Offline. AC INI-Param: gStreamingCacheSize
               acStreamingCacheRefreshTime 1.3.6.1.4.1.5003.9.10.4.1.11.2
Defines the streaming cache data refresh time in minutes. If -1 is set, refresh is off. Access: Offline. AC INI-Param: gStreamingCacheRefreshTime
               acStreamingCacheClearService 1.3.6.1.4.1.5003.9.10.4.1.11.3
reset the streaming cache. Access: Instant. AC INI-Param: N/A
         acMediaVideoConfig 1.3.6.1.4.1.5003.9.10.4.1.12
               acMediaVideoConfigEncoderIntraInterval 1.3.6.1.4.1.5003.9.10.4.1.12.1
Sets the frequency for the number of frames at which the encoder outputs an Intra frame. Access: Online. AC INI-Param: VideoEncoderIntraInterval
               acMediaVideoConfigMaxPacketSize 1.3.6.1.4.1.5003.9.10.4.1.12.2
Sets the maximum packet size in bytes. Access: Online. AC INI-Param: VideoMaxPacketSize
               acMediaVideoConfigTargetBitrate 1.3.6.1.4.1.5003.9.10.4.1.12.3
Sets the target output bit rate. Access: Online. AC INI-Param: VideoTargetBitrate
               acMediaVideoConfigQualityParameterForRateControl 1.3.6.1.4.1.5003.9.10.4.1.12.4
This value determines the trade off between video quality and frame rate. A low value indicates a higher quality with a lower frame rate and vice versa. Access: Online. AC INI-Param: VideoQualityParameterForRateControl
               acMediaVideoConfigRateControlType 1.3.6.1.4.1.5003.9.10.4.1.12.5
Sets bitrate output to either a constant or a variable bit rate. CBR (0) - Constant Bit Rate. VBR (1) - Variable Bit Rate. Target Bitrate indicates the target average output bit rate. . Access: Online. AC INI-Param: VideoRateControlType
               acMediaVideoConfigEnableReSyncHeader 1.3.6.1.4.1.5003.9.10.4.1.12.6
Indicates whether to add a video packet header to every packet in order to increase error resilience. 0 - Disable 1 - Enable. Access: Online. AC INI-Param: VideoEnableReSyncHeader
               acMediaVideoConfigEnableAudioVideoSynchronization 1.3.6.1.4.1.5003.9.10.4.1.12.7
Determines whether to enable audio and video synchronization. 0 - No synchronization between audio and video streams 1 - Synchronization between audio and video streams . Access: Online. AC INI-Param: EnableAudioVideoSynchronization
         acIPMediaChannels 1.3.6.1.4.1.5003.9.10.4.1.13
               acIPMediaChannelsEnable 1.3.6.1.4.1.5003.9.10.4.1.13.1
Whether to enable DSP channels reservation for IPmedia support. Relevant for Mediant 1000 board only. One of the following possible 0 = Disable 1 - Enable. Access: Offline. AC INI-Param: EnableIPMediaChannels
               acIPMediaChannelsResourcesTable 1.3.6.1.4.1.5003.9.10.4.1.13.21
IPMedia channels info
                     acIPMediaChannelsResourcesEntry 1.3.6.1.4.1.5003.9.10.4.1.13.21.1
Tok_String
                         acIPMediaChannelsResourcesIndex 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.1
Index Field for line. Internal parameter. AC INI-Param: IPMediaChannels_Index
                         acIPMediaChannelsResourcesRowStatus 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.2
ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A
                         acIPMediaChannelsResourcesAction 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.3
Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
                         acIPMediaChannelsResourcesActionRes 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.4
Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
                         acIPMediaChannelsResourcesModuleID 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.5
Refers to M1K board only, module at which slot. Access: Offline. AC INI-Param: IPMediaChannels_ModuleID
                         acIPMediaChannelsResourcesDSPChannelsReserved 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.6
How many DSP channels reserve for IPMedia channels. Access: Offline. AC INI-Param: IPMediaChannels_DSPChannelsReserved
     acMediaStatus 1.3.6.1.4.1.5003.9.10.4.2
         acIPLegs 1.3.6.1.4.1.5003.9.10.4.2.1
             acIPLegsTable 1.3.6.1.4.1.5003.9.10.4.2.1.1
Tok_String
                 acIPLegsEntry 1.3.6.1.4.1.5003.9.10.4.2.1.1.1
Tok_String
                     acIPLegsLegIndex 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.1
Describes Rtp Endpoint In A Specific Call. AC INI-Param: N/A
                     acIPLegsCallIndex 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.2
Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A
                     acIPLegsRTPActive 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.3
Decribes whether the RTP is active or not. AC INI-Param: N/A
                     acIPLegsCoderType 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.4
describes the coder Type. AC INI-Param: N/A
                     acIPLegsSilenceCompression 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.5
Enables or Disables the Silence Compression. AC INI-Param: N/A
                     acIPLegsDTMFDetection 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.6
Enables or Disables the DTMF Detection. AC INI-Param: N/A
                     acIPLegsLocalRTPPort 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.7
Describes the RTP port of the Leg. AC INI-Param: N/A
                     acIPLegsRemoteRTPAddress 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.8
Describes the RTP address. AC INI-Param: N/A
                     acIPLegsFaxTransportType 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.9
Describes the Fax transfor Type currently working. AC INI-Param: N/A
                     acIPLegsRxPackets 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.10
Describes the received packets on the Leg. AC INI-Param: N/A
                     acIPLegsTxPackets 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.11
Describes the Transmitted packets on the Leg. AC INI-Param: N/A
                     acIPLegsRxBytes 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.12
Describes the received Bytes on the Leg. AC INI-Param: N/A
                     acIPLegsTxBytes 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.13
Describes the Transmitted packets on the Leg. AC INI-Param: N/A
                     acIPLegsJitter 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.14
Describes the Jitter on the Leg. AC INI-Param: N/A
                     acIPLegsPacketLoss 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.15
Describes the Lost packets on the Leg. AC INI-Param: N/A
                     acIPLegsSSRCOfSender 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.16
Describes the SSRC Of the Sender. AC INI-Param: N/A
                     acIPLegsDSPDevice 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.17
Describes the DSP Device Of the Leg. AC INI-Param: N/A
                     acIPLegsLegName 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.18
Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A