AC-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: AUDIOCODES LTD


 Home MIB: AC-ATM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 audioCodes 1.3.6.1.4.1.5003
           acRegistrations 1.3.6.1.4.1.5003.7
           acGeneric 1.3.6.1.4.1.5003.8
           acProducts 1.3.6.1.4.1.5003.9
               acBoardMibs 1.3.6.1.4.1.5003.9.10
                     acAtm 1.3.6.1.4.1.5003.9.10.6
The Audiocodes ATMMIB.
                         acAtmConfiguration 1.3.6.1.4.1.5003.9.10.6.1
                             atmGeneralParams 1.3.6.1.4.1.5003.9.10.6.1.1
                                 atmGeneralParamsAtmDefaultApplicationType 1.3.6.1.4.1.5003.9.10.6.1.1.1 integer read-write
This is the default application type used when the board cannot determine from the H248 add message which AAL type to use. Enumeration: 'aal2-i-366-2': 2, 'aal1': 1, 'aal2-umts': 3.
                                 atmGeneralParamsAtmTransmissionMode 1.3.6.1.4.1.5003.9.10.6.1.1.2 integer read-write
This is the ATM Port Optical Carrier type which indicates whether the European standard (SDH) is to be employed or the North American Standard (SONET) Enumeration: 'sonet': 1, 'sdh': 0, 'none': 2.
                             atmPort 1.3.6.1.4.1.5003.9.10.6.1.2
                                 atmPortTable 1.3.6.1.4.1.5003.9.10.6.1.2.1 no-access
This table indicates general information about and alarm status of the ATM optical fiber ports. It is also used to configure the ATM address associated with the optical port and read that address.
                                     atmPortEntry 1.3.6.1.4.1.5003.9.10.6.1.2.1.1 no-access
                                         atmPortAdministrativeState 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.1 integer read-write
This is the ATM Port Administrative State Enumeration: 'locked': 0, 'shuttingDown': 1, 'unlocked': 2.
                                         atmPortOperationalState 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.2 integer read-only
This is the Port Operational State Enumeration: 'disabled': 0, 'enabled': 1.
                                         atmPortNumber 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.3 integer read-only
This is the ATM Port Number Enumeration: 'port2': 2, 'port0': 0, 'port1': 1.
                                         atmPortAdminAddress 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.4 atmaddr read-write
This is the Administrative ATM Port Address (20 octets in length - 40 hexadecimal characters). This address is manually configured. This address is used when ILMI is not available.
                                         atmPortOperationalAddress 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.5 atmaddr read-only
This is the port ATM address currently in operation (i.e.:assigned to this port). This address is set to atmPortAdminAddress if no ILMI address is registered. If an ILMI address is successfully registered, then atmPortOperationalAddress will be set to the ILMI one, though an administrative address may have already been configured. Thus ILMI address always takes precedence over the administrative one. If both the administrative and ILMI addresses are unavailable then the operational address is left empty. Refer to atmPortAddressMode for which address is operational.
                                         atmPortAlarmStatus 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.6 integer read-only
This is the ATM Port Alarm Status. The possible values are: cleared(0) - LOS, AIS and RDI conditions are not present los(1) - the LOS condition is present ais(2) - AIS condition is present (LOS condition is not present) rdi(4) - RDI condition is present (LOS and AIS conditions are not present) Note: Alarm conditions (from the SONET/SDH standard documents) are: LOS - Loss Of Signal AIS - Alarm Indication Signal RDI - Remote Defect Indication Enumeration: 'los': 1, 'cleared': 0, 'rdi': 4, 'ais': 2.
                                         atmPortAddressMode 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.7 integer read-only
The mode reflects the type of address in operation. addrModeNone(0) : No administrative address has been configured and no ILMI address has been registered. Thus no address is available to assign to the port. addrModeManual(1): An Administrative address has been configured and no ILMI address has been registered. Thus the port is assigned the manually configured address.addrModeILMI (2): An ILMI address has been registered. The port is assigned this address. The administrative address is ignored if it has been configured. Enumeration: 'addrModeManual': 1, 'addrModeILMI': 2, 'addrModeNone': 0.
                             atmRemoteGateway 1.3.6.1.4.1.5003.9.10.6.1.3
                                 atmRemoteGatewayTable 1.3.6.1.4.1.5003.9.10.6.1.3.1 no-access
This includes the destination remote Gateways (and RNC) that the Media Gateway would have signaling contact with.
                                     atmRemoteGatewayEntry 1.3.6.1.4.1.5003.9.10.6.1.3.1.1 no-access
                                         atmRemoteGatewayRowStatus 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.1 rowstatus read-only
The RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows.
                                         atmRemoteGatewayAction 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.2 integer read-only
Development Pending -for future use
                                         atmRemoteGatewayActionResult 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.3 integer read-only
Development Pending -future use
                                         atmRemoteGatewayIndex 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.4 integer read-write
.
                                         atmRemoteGatewayName 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.5 octet string read-write
Remote Gateway name
                                         atmRemoteGatewayNSAPAddress 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.6 atmaddr read-write
This is the ATM Address associated with the remote Gateway to which this PVC connects (20 octets in length - 40 hexadecimal characters)
                                         atmRemoteGatewayALCAPInstanceNum 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.7 integer read-write
ALCAP Instance number associated with the remote Gateway ( 3G only)
                             aal2PVC 1.3.6.1.4.1.5003.9.10.6.1.4
                                 aal2PVCTable 1.3.6.1.4.1.5003.9.10.6.1.4.1 no-access
This table contains information referring to Permanent Virtual Channels connecting the AMS to the ATM Edge Switch.
                                     aal2PVCEntry 1.3.6.1.4.1.5003.9.10.6.1.4.1.1 no-access
                                         aal2PVCRowStatus 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.1 rowstatus read-only
The RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows.
                                         aal2PVCAction 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.2 integer read-only
Development Pending - for future use Enumeration: 'none': 0.
                                         aal2PVCActionResult 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.3 integer read-only
Development Pending - for future use Enumeration: 'none': 0.
                                         aal2PVCRemoteGatewayIndex 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.4 integer read-write
This is the gw index that associated with the remote Gateway table to which this PVC connects (20 octets in length - 40 hexadecimal characters)
                                         aal2PVCVCCIPATHID 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.5 integer read-write
This is the range of Virtual Connection Channel Identifiers which is an end to end identifier for an AAL2 VC.
                                         aal2PVCPortNumber 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.6 integer read-write
This is the port number associated with the PVC Enumeration: 'port2': 2, 'port0': 0, 'port1': 1.
                                         aal2PVCVpi 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.7 integer read-write
This is the VPI assigned to the PVC
                                         aal2PVCVci 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.8 integer read-write
This is the VCI assigned to the PVC
                                         aal2PVCMaxNumOfCid 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.9 integer read-write
This is the maximum number of CIDs for the AAL2 PVC.
                                         aal2PVCNumOfCidInUse 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.10 integer read-only
This is the number of CIDs for AAL2 PVC currently in use.
                                         aal2PVCServiceCategory 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.11 integer read-write
This is the Service Category which is either CBR (Constant Bit Rate) or rtVBR (realtime Variable Bit Rate) Enumeration: 'cbr': 1, 'rtVbr': 2.
                                         aal2PVCPCR 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.12 integer read-write
This is the peak cell rate (PCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC
                                         aal2PVCSCR 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.13 integer read-write
This is the sustained cell rate (SCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC.
                                         aal2PVCMBS 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.14 integer read-write
This is the Maximum Burst Size (MBS) for the provisioned virtual channel (PVC).
                             atmPortLoopbackConfig 1.3.6.1.4.1.5003.9.10.6.1.5
                                 atmPortLoopbackConfigTable 1.3.6.1.4.1.5003.9.10.6.1.5.1 no-access
This table gives the Loopback Configuration associated with a given Optical Fiber Port number.
                                     atmPortLoopbackConfigEntry 1.3.6.1.4.1.5003.9.10.6.1.5.1.1 no-access
                                         atmPortLoopbackConfigIsUsed 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.1 integer read-write
This tells whether or not the port loopback is used. If the port is available on the board, this is yes. Enumeration: 'yes': 1, 'no': 0.
                                         atmPortLoopbackConfigAction 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.2 integer read-only
Development Pending - for future use Enumeration: 'none': 0.
                                         atmPortLoopbackConfigActionResult 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.3 integer read-only
Development Pending - for future use Enumeration: 'none': 0.
                                         atmPortLoopbackConfigPortNumber 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.4 integer read-write
The port number associated with the optical port which is being described. Enumeration: 'port2': 2, 'port0': 0, 'port1': 1.
                                         atmPortLoopbackConfigMode 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.5 integer read-write
This is the mode in which the loopback will work: no loopback, UNI loopback, or Virtual Path loopback Enumeration: 'vp': 2, 'uni': 1, 'none': 0.
                                         atmPortLoopbackConfigOutBoundVirtualPath 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.6 integer read-write
If the atmLoopback mode is VP, this specifies the VP identity for the cells going toward the ATM edge switch
                                         atmPortLoopbackConfigInBoundVirtualPath 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.7 integer read-write
If the atmLoopback mode is VP, this specifies the VP identity for the cells coming from the ATM edge switch
                                         atmPortLoopbackConfigVciRangeFirst 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.8 integer read-write
If the atmLoopback mode is VP, this specifies the minimum VCI within the inbound and outbound VP which may be used.
                                         atmPortLoopbackConfigVciRangeLast 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.9 integer read-write
If the atmLoopback mode is VP, this specifies the maximum VCI within the inbound and outbound VP which may be used.
                                         atmPortLoopbackConfigServiceCategory 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.10 integer read-write
This category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release. Enumeration: 'cbr': 1, 'rtVbr': 2.
                                         atmPortLoopbackConfigPCR 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.11 integer read-write
This is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).
                                         atmPortLoopbackConfigSCR 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.12 integer read-write
This is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).
                                         atmPortLoopbackConfigMBS 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.13 integer read-write
This is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells.
                             atmSvcProfile 1.3.6.1.4.1.5003.9.10.6.1.6
                                 atmSvcProfileTable 1.3.6.1.4.1.5003.9.10.6.1.6.1 no-access
This table indicates information about profiles associated with the creation of each new AAL2 SVC.
                                     atmSvcProfileEntry 1.3.6.1.4.1.5003.9.10.6.1.6.1.1 no-access
                                         atmSvcProfileIsUsed 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.1 integer read-write
This tells whether or not this SVC profile is used. If it is used, the value is yes. Enumeration: 'yes': 1, 'no': 0.
                                         atmSvcProfileIndex 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.2 integer read-write
Initially only one SVC Profile is supported. This parameter may be updated later as the table supports more profiles
                                         atmSvcProfileMaxNumOfCids 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.3 integer read-write
The CIDs fall in the range of 8 to 255, so there are a maximum of 248 CIDs possible. The assignment of CID #8 may be received but not initiated. Assignments from the low end of the CID range should start with 9 as there are some vendors who use 8 for a special OAM purpose.
                                         atmSvcProfilePCR 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.4 integer read-write
This is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).
                                         atmSvcProfileSCR 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.5 integer read-write
This is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).
                                         atmSvcProfileMBS 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.6 integer read-write
This is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells.
                                         atmSvcProfilePersistence 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.7 integer read-write
This is the parameter which descirbes how long an AAL2 SVC will persist even when no CIDs are in use. Generally, this is on the order of 180 to 600 seconds. Non-persistent SVCs should have a value of 0.
                                         atmSvcProfileServiceCategory 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.8 integer read-write
This category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release. Enumeration: 'cbr': 1, 'rtVbr': 2.
                         acAtmStatus 1.3.6.1.4.1.5003.9.10.6.2
                             atmSvcConnection 1.3.6.1.4.1.5003.9.10.6.2.1
                                 atmSvcConnectionTable 1.3.6.1.4.1.5003.9.10.6.2.1.1 no-access
This is the table which describes the read only characteristics of a given AAL1 or AAL2 SVC.
                                     atmSvcConnectionEntry 1.3.6.1.4.1.5003.9.10.6.2.1.1.1 no-access
                                         atmSvcConnectionIndex 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.1 integer read-only
A unique index, that identifies the SVC on the system.
                                         atmSvcConnectionRemoteGatewayAddress 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.2 atmaddr read-only
This is the ATM Address associated with the remote Gateway to which this SVC connects (20 octets in length - 40 hexadecimal characters)
                                         atmSvcConnectionPort 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.3 integer read-only
This is the port on which the SVC is connected Enumeration: 'port2': 2, 'port0': 0, 'port1': 1.
                                         atmSvcConnectionVpi 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.4 integer read-only
This is the VPI associated with the SVC
                                         atmSvcConnectionVci 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.5 integer read-only
This is the VCI associated with the SVC
                                         atmSvcConnectionAALType 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.6 integer read-only
This is the Adaptation Layer type. It is either AAL1 or AAL2. Enumeration: 'aal2': 2, 'aal1': 1.
                                         atmSvcConnectionDirection 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.7 integer read-only
This is the direction in which the SVC was setup. Incoming means the this end received the SETUP. Outgoing means this end sent the SETUP. Enumeration: 'outgoing': 1, 'incoming': 0.
                                         atmSvcConnectionEecid 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.8 unsigned32 read-only
This is the unique end to end identifier associated with the setup of AAL1 SVCs
                                         atmSvcConnectionVcci 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.9 integer read-only
This is the unique identity of an SVC associated with an AAL2 connection
                                         atmSvcConnectionMaxNumOfCid 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.10 integer read-only
This is the maximum number of CIDs for an AAL2 SVC.
                                         atmSvcConnectionNumOfCidInUse 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.11 integer read-only
This is the number of channel Ids currently in use in a given SVC.