A3COM-HUAWEI-LswVLAN-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: A3COM-HUAWEI-LswVLAN-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwLswVlan 1.3.6.1.4.1.43.45.1.2.23.1.2
     hwLswVlanMngObject 1.3.6.1.4.1.43.45.1.2.23.1.2.1
Description.
         hwdot1qVlanMIBTable 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1 no-access
VLAN MIB table
             hwdot1qVlanMIBEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1 no-access
Entries of VLAN MIB table
                 hwdot1qVlanIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.1 hwvlanindex read-only
The VLAN-ID.
                 hwdot1qVlanName 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.2 snmpadminstring read-write
Name of the VLAN.
                 hwdot1qVlanPorts 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.3 portlist read-write
Port list of the VLAN.
                 hwdot1qVlanType 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.4 integer read-write
Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3). Enumeration: 'common-vlan': 2, 'isolate-user-vlan': 4, 'secondary-vlan': 5, 'sub-vlan': 3, 'superVlan': 1.
                 hwdot1qVlanMacFilter 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.5 truthvalue read-only
Whether to filter MAC addresses.
                 hwdot1qVlanMcastUnknownProtos 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.6 truthvalue read-only
Whether to broadcast the unknown packets.
                 hwExistInterface 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.7 truthvalue read-only
Whether there is virtual interface.
                 hwVlanInterfaceIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.8 integer read-only
Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0.
                 hwdot1qVlanMacLearn 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.9 truthvalue read-only
MAC address learning identity. (common vlan/Sub-vlan)
                 hwdot1qVlanStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.10 integer read-only
Status of the VLAN. Enumeration: 'dynamic': 3, 'other': 1, 'static': 2.
                 hwdot1qVlanCreationTime 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.11 timeticks read-only
The sysUPTime when the VLAN is created.
                 hwdot1qVlanPriority 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.12 integer read-write
Priority of the VLAN.
                 hwdot1qVlanRowStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.13 rowstatus read-only
Operation status.
                 hwdot1qVlanBroadcastSuppression 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.14 integer read-write
Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading
                 hwdot1qVlanBcastSuppressionPPS 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.15 integer read-write
If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hwdot1qVlanBroadcastSuppression. If the mode is set, hwdot1qVlanBroadcastSuppression is unavailable. And vice versa.
                 hwdot1qVlanMulticast 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.16 integer read-write
Multicast vlan. The default value is disable(0). Enumeration: 'enable': 1, 'disable': 0.
                 hwdot1qVlanTaggedPorts 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.17 portlist read-only
Tagged port list of the VLAN.
                 hwdot1qVlanUntaggedPorts 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.18 portlist read-only
Untagged port list of the VLAN.
                 hwdot1qVlanPortIndexs 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.19 octet string read-write
PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.
         hwVlanInterfaceTable 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2 no-access
Virtual interface configuration table
             hwVlanInterfaceEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1 no-access
Entries of virtual interface configuration table
                 hwVlanInterfaceID 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.1 integer read-only
Index of the vlan interface table.
                 hwdot1qVlanID 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.2 hwvlanindex read-only
VLAN-ID
                 hwdot1qVlanIpAddress 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.3 ipaddress read-write
IP address of interface.
                 hwdot1qVlanIpAddressMask 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.4 ipaddress read-write
IP address mask of interface.
                 hwVlanInterfaceAdminStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.5 integer read-write
Status of VLAN virtual interfaces. Enumeration: 'down': 2, 'up': 1.
                 hwVlanInterfaceFrameType 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.6 integer read-only
Frame type accepted by VLAN virtual interfaces. Enumeration: 'ethernet-ii': 1, 'ethernet-8022': 3, 'ethernet-8023': 4, 'ethernet-snap': 2.
                 hwInterfaceRowStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.7 rowstatus read-only
Operation status.
                 hwVlanInterfaceIpMethod 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.8 integer read-write
Vlan interface ip address acquiring method which is manual, dhcp or bootp. Enumeration: 'assigned-ip': 1, 'dhcp-ip': 2, 'bootp-ip': 3.
                 hwVlanInterfaceIfIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.9 integer read-only
IfIndex of VLAN interface.
         hwifIsolateMappingTable 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4 no-access
Secondary vlan lists of Isolate-VLANs.
             hwifIsolateMappingEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1 no-access
Secondary vlan lists of Isolate-VLANs.
                 hwifIsolatePrimaryVlanID 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1.1 hwvlanindex read-only
Primary VLAN-ID.
                 hwifIsolateSecondaryVlanlistLow 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1.2 octet string read-write
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
                 hwifIsolateSecondaryVlanlistHigh 1.3.6.1.4.1.43.45.1.2.23.1.2.1.4.1.3 octet string read-write
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
         hwVlanInterfaceAddrTable 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5 no-access
VLAN interface IP address configuration table
             hwVlanInterfaceAddrEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1 no-access
Entries of VLAN interface IP address configuration table
                 hwVlanInterfaceIpIfIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.1 integer read-only
Index of VLAN interfaces.
                 hwVlanInterfaceIpAddr 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.2 ipaddress read-write
IP address of VLAN interface. When taking destory operation, you could set it zero to destory all IP addresses(but cluster IP address) in this VLAN interface.
                 hwVlanInterfaceIpMask 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.3 ipaddress read-write
IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address.
                 hwVlanInterfaceIpType 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.4 integer read-write
IP address type. cluster(3) will only be set when taking GET or GET NEXT operation. primary(1) is optional when taking SET primary IP address operation. Enumeration: 'cluster': 3, 'vrrp': 4, 'primary': 1, 'sub': 2.
                 hwVlanInterfaceIpRowStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.5.1.5 rowstatus read-only
Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation.
         hwdot1qVlanBatchMIBTable 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6 no-access
VLAN batch configuration table. In the case of VLAN batch creation, hwdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hwdot1qVlanBatchStartIndex 2, hwdot1qVlanBatchEndIndex 4, hwdot1qVlanBatchSetOperate create(1), hwdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hwdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hwdot1qVlanBatchStartIndex 10, hwdot1qVlanBatchEndIndex 20, hwdot1qVlanBatchSetOperate delete(2), hwdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row.
             hwDot1qVlanBatchMIBEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1 no-access
VLAN batch configuration entry.
                 hwdot1qVlanBatchOperIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.1 integer32 read-only
The consequence of operation.
                 hwdot1qVlanBatchStartIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.2 hwvlanindex read-write
The value of start VLAN-ID.
                 hwdot1qVlanBatchEndIndex 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.3 hwvlanindex read-write
The value of end VLAN-ID.
                 hwdot1qVlanBatchOperStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.4 integer read-only
The status of operation. Enumeration: 'opInprogress': 1, 'opsuccesspartial': 4, 'opfailure': 2, 'opsuccess': 3.
                 hwdot1qVlanBatchRowStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.5 rowstatus read-only
The row status of HwDot1qVlanBatchMIBEntry.
                 hwdot1qVlanBatchSetOperate 1.3.6.1.4.1.43.45.1.2.23.1.2.1.6.1.6 integer read-only
VLAN batch creation or deletion. Enumeration: 'create': 1, 'delete': 2.
         hwifSuperVlanMappingTable 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7 no-access
Sub VLAN lists of super-VLANs.
             hwifSuperVlanMappingEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1 no-access
Sub VLAN lists of super-VLANs.
                 hwifSuperVlanID 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1.1 hwvlanindex read-only
Super VLAN ID.
                 hwifSubVlanlistLow 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1.2 octet string read-write
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
                 hwifSubVlanlistHigh 1.3.6.1.4.1.43.45.1.2.23.1.2.1.7.1.3 octet string read-write
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
     hwLswVlanProtoObject 1.3.6.1.4.1.43.45.1.2.23.1.2.2
Description.
         hwVLANMibGarpLeaveAllTime 1.3.6.1.4.1.43.45.1.2.23.1.2.2.14 timeinterval read-write
The GARP LeaveAll time, in centiseconds.
         hwvLANMibSwitchCountTable 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15 no-access
A table containing the information various statistics of switch.
               hwvLANMibSwitchCountEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1 no-access
A table containing the information various statistics of switch.
                   hwVLANMibSwitchGMRPRXPkt 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.1 counter32 read-only
Number of GMRP frames received.
                   hwVLANMibSwitchGVRPRXPkt 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.2 counter32 read-only
Number of GVRP frames received.
                   hwVLANMibSwitchGMRPTXPkt 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.3 counter32 read-only
Number of GMRP frames transmitted.
                   hwVLANMibSwitchGVRPTXPkt 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.4 counter32 read-only
Number of GVRP frames transmitted.
                   hwVLANMibSwitchDiscardedPkt 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.5 counter32 read-only
Number of discarded frames.
                   hwVLANMibSwitchGarpStatClear 1.3.6.1.4.1.43.45.1.2.23.1.2.2.15.1.6 integer read-write
Clear various Statistics viz. read operation not supported. Enumeration: 'clear': 1.
         hwvLANMibHoldTimeTable 1.3.6.1.4.1.43.45.1.2.23.1.2.2.16 no-access
A table for setting/getting the Hold Time for a particular port.
               hwvLANMibHoldTimeEntry 1.3.6.1.4.1.43.45.1.2.23.1.2.2.16.1 no-access
A table for setting/getting the HoldTime of the port.
                   hwVLANMibHoldTime 1.3.6.1.4.1.43.45.1.2.23.1.2.2.16.1.1 integer read-write
HoldTime of the port.